1900

Life cycle assessment integration into energy system models: An application for Power-to-Methane in the EU

Abstract

As the EU energy system transitions to low carbon, the technology choices should consider a broader set of criteria. The use of Life Cycle Assessment (LCA) prevents burden shift across life cycle stages or impact categories, while the use of Energy System Models (ESM) allows evaluating alternative policies, capacity evolution and covering all the sectors. This study does an ex-post LCA analysis of results from JRC-EU-TIMES and estimates the environmental impact indicators across 18 categories in scenarios that achieve 80–95% COemission reduction by 2050. Results indicate that indirect COemissions can be as large as direct ones for an 80% COreduction target and up to three times as large for 95% COreduction. Impact across most categories decreases by 20–40% as the COemission target becomes stricter. However, toxicity related impacts can become 35–100% higher. The integrated framework was also used to evaluate the Power-to-Methane (PtM) system to relate the electricity mix and various CO2 sources to the PtM environmental impact. To be more attractive than natural gas, the climate change impact of the electricity used for PtM should be 123–181 gCO2eq/kWh when the COcomes from air or biogenic sources and 4–62 gCO2eq/kWh if the CO2 is from fossil fuels. PtM can have an impact up to 10 times larger for impact categories other than climate change. A system without PtM results in ~4% higher climate change impact and 9% higher fossil depletion, while having 5–15% lower impact for most of the other categories. This is based on a scenario where 9 parameters favor PtM deployment and establishes the upper bound of the environmental impact PtM can have. Further studies should work towards integrating LCA feedback into ESM and standardizing the methodology.

Countries: Netherlands
Loading

Article metrics loading...

/content/45
2019-11-01
2021-07-30
http://instance.metastore.ingenta.com/content/45
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error