Australia
Utilization and Recycling of End of Life Plastics for Sustainable and Clean Industrial Processes Including the Iron and Steel Industry
Aug 2019
Publication
About 400 million tonnes of plastics are produced per annum worldwide. End-of-life of plastics disposal contaminates the waterways aquifers and limits the landfill areas. Options for recycling plastic wastes include feedstock recycling mechanical /material recycling industrial energy recovery municipal solid waste incineration. Incineration of plastics containing E-Wastes releases noxious odours harmful gases dioxins HBr polybrominated diphenylethers and other hydrocarbons. This study focusses on recycling options in particular feedstock recycling of plastics in high-temperature materials processing for a sustainable solution to the plastic wastes not suitable for recycling. Of the 7% CO2 emissions attributed to the iron and steel industry worldwide ∼30% of the carbon footprint is reduced using the waste plastics compared to other carbon sources in addition to energy savings. Plastics have higher H2 content than the coal. Hydrogen evolved from the plastics acts as the reductant alongside the carbon monoxide. Hydrogen reduction of iron ore in presence of plastics increases the reaction rates due to higher diffusion of H2 compared to CO. Plastic replacement reduces the process temperature by at least 100–200 °C due to the reducing gases (hydrogen) which enhance the energy efficiency of the process. Similarly plastics greatly reduce the emissions in other high carbon footprint process such as magnesia production while contributing to energy.
Thoughts on the Prospects of Renewable Hydrogen
Oct 2020
Publication
In the last two years or so there has been increasing interest in hydrogen as an energy source in Australia and around the world. Notably this is not the first time that hydrogen has caught our collective interest. Most recently the 2000s saw a substantial investment in hydrogen research development and demonstration around the world. Prior to that the oil crises of the 1970s also stimulated significant investment in hydrogen and earlier still the literature on hydrogen was not lacking. And yet the hydrogen economy is still an idea only.<br/>So what if anything might be different this time?<br/>This is an important question that we all need to ask and for which the author can only give two potential answers. First our need to make dramatic reductions in greenhouse gas (GHG) emissions has become more pressing since these previous waves of interest. Second renewable energy is considerably more affordable now than it was before and it has consistently outperformed expectations in terms of cost reductions by even its strongest supporters.<br/>While this dramatic and ongoing reduction in the cost of renewables is very promising our need to achieve substantial GHG emission reductions is the crucial challenge. Moreover meeting this challenge needs to be achieved with as little adverse social and economic impact as possible.<br/>When considering what role hydrogen might play we should first think carefully about the massive scale and complexity of our global energy system and the typical prices of the major energy commodities. This provides insights into what opportunities hydrogen may have. Considering a temperate country with a small population like Australia we see that domestic natural gas and transport fuel markets are comparable to and even larger than the electricity market on an energy basis.
Transferring the Retail of Hydrogen Economy and Missing Safety Assurance
Sep 2019
Publication
Australian regional communities are moving ahead of governments. Enterprising individuals are pushing ahead to find global solutions to local issues that governments (local or state or federal) have abandoned stalled mothballed or failed to resolve. We are faced with a flaw in retail of hydrogen economy as fatal as Walgett running dry or a million fish killed in Murray-Darling. The challenge in Australian regional communities will be to interpret safety assurance requirements in an appropriate manner even in severe economic swings such as drought bushfire or floods. In this context the efficacious cultural embrace by regional communities of three key program elements is essential - Australian Hydrogen Safety Panel Hydrogen Safety Knowledge Tools and Dissemination Hydrogen Safety First Responder Training. What are the odds of no accident in retailing hydrogen for examples to vehicles? Place is everything in regional communities of Australia because in nature (as in the ocean) there is no spin. This paper examines the safety assurance issues associated with the cultural integration of Hydrogen’s three key program elements in a country Australia that is fed-up with government.
Hydrogen Production by Fluidized Bed Reactors: A Quantitative Perspective Using the Supervised Machine Learning Approach
Jul 2021
Publication
The current hydrogen generation technologies especially biomass gasification using fluidized bed reactors (FBRs) were rigorously reviewed. There are involute operational parameters in a fluidized bed gasifier that determine the anticipated outcomes for hydrogen production purposes. However limited reviews are present that link these parametric conditions with the corresponding performances based on experimental data collection. Using the constructed artificial neural networks (ANNs) as the supervised machine learning algorithm for data training the operational parameters from 52 literature reports were utilized to perform both the qualitative and quantitative assessments of the performance such as the hydrogen yield (HY) hydrogen content (HC) and carbon conversion efficiency (CCE). Seven types of operational parameters including the steam-to-biomass ratio (SBR) equivalent ratio (ER) temperature particle size of the feedstock residence time lower heating value (LHV) and carbon content (CC) were closely investigated. Six binary parameters have been identified to be statistically significant to the performance parameters (hydrogen yield (HY)) hydrogen content (HC) and carbon conversion efficiency (CCE) by analysis of variance (ANOVA). The optimal operational conditions derived from the machine leaning were recommended according to the needs of the outcomes. This review may provide helpful insights for researchers to comprehensively consider the operational conditions in order to achieve high hydrogen production using fluidized bed reactors during biomass gasification.
Decarbonising UK Transport: Implications for Electricity Generation, Land Use and Policy
Dec 2022
Publication
To ensure the UK’s net zero targets are met the transition from conventionally fueled transport to low emission alternatives is necessary. The impact from increased decarbonised electricity generation on ecosystem services (ES) and natural capital (NC) are not currently quantified with decarbonisation required to minimise impacts from climate change. This study aims to project the future electric and hydrogen energy demand between 2020 and 2050 for car bus and train to better understand the land/sea area that would be required to support energy generation. In this work predictions of the geospatial impact of renewable energy (onshore/offshore wind and solar) nuclear and fossil fuels on ES and NC were made considering generation mix number of generation installations and energy density. Results show that electric transport will require ~136599 GWh for all vehicle types analysed in 2050 much less than hydrogen transport at ~425532 GWh. We estimate that to power electric transport at least 1515 km2 will be required for solar 1672 km2 for wind and 5 km2 for nuclear. Hydrogen approximately doubles this requirement. Results provide an approximation of the future demands from the transport sector on land and sea area use indicating that a combined electric and hydrogen network will be needed to accommodate a range of socio-economic requirements. While robust assessments of ES and NC impacts are critical in future policies and planning significant reductions in energy demands through a modal shift to (low emission) public transport will be most effective in ensuring a sustainable transport future.
Innovating Transport Across Australia: Inquiry into Automated Mass Transit
Mar 2019
Publication
Automated and electric mass transit will play a significant role in the connectivity of our cities and regions. But automated mass transit must be placed within the wider context of the optimum transport needs of those cities and regions— transport networks based on shared and multi-modal mobility. Realising the full potential of these networks will require sustained policy development and investment.<br/>This report examines current and future developments in the use of automation and new energy sources in land-based mass transit including rail and road mass transit point-to-point transport using automated vehicles and the role and responsibilities of the Commonwealth in the development of these technologies. It will analyse the opportunities and challenges presented by automation and new energy sources and the role the Australian Government has to play in managing this transport revolution.
Advancing Hydrogen: Learning from 19 Plans to Advance Hydrogen from Across the Globe
Jul 2019
Publication
Hydrogen as the International Energy Agency (IEA 2019) notes has experienced a number of ‘false dawns’ - in the 1970s 1990s and early 2000s - which subsequently faded. However this time there is reason to think that hydrogen will play a substantial role in the global energy system. The most important factor driving this renewed focus is the ability of hydrogen to support deep carbon abatement by assisting in those sectors where abatement with non-carbon electricity has so far proven difficult. Hydrogen can also address poor urban air quality energy security and provides a good means of shifting energy supply between regions and between seasons.
In response to these changed conditions many countries states and even cities have developed hydrogen strategies while various interest groups have developed industry roadmaps which fulfil a similar role.
This report summarises 19 hydrogen strategies and aims to help readers understand how nations regions and industries are thinking about opportunities to become involved in this emerging industry. Its prime purpose is to act as a resource to assist those involved in long-term energy policy planning in Australia including those involved in the development of Australia’s hydrogen strategy
The full report can be read on the Energy Network website at this link here
In response to these changed conditions many countries states and even cities have developed hydrogen strategies while various interest groups have developed industry roadmaps which fulfil a similar role.
This report summarises 19 hydrogen strategies and aims to help readers understand how nations regions and industries are thinking about opportunities to become involved in this emerging industry. Its prime purpose is to act as a resource to assist those involved in long-term energy policy planning in Australia including those involved in the development of Australia’s hydrogen strategy
The full report can be read on the Energy Network website at this link here
Converting Sewage Water into H2 Fuel Gas Using Cu/CuO Nanoporous Photocatalytic Electrodes
Feb 2022
Publication
This work reports on H2 fuel generation from sewage water using Cu/CuO nanoporous (NP) electrodes. This is a novel concept for converting contaminated water into H2 fuel. The preparation of Cu/CuO NP was achieved using a simple thermal combustion process of Cu metallic foil at 550 ◦C for 1 h. The Cu/CuO surface consists of island-like structures with an inter-distance of 100 nm. Each island has a highly porous surface with a pore diameter of about 250 nm. X-ray diffraction (XRD) confirmed the formation of monoclinic Cu/CuO NP material with a crystallite size of 89 nm. The prepared Cu/CuO photoelectrode was applied for H2 generation from sewage water achieving an incident to photon conversion efficiency (IPCE) of 14.6%. Further the effects of light intensity and wavelength on the photoelectrode performance were assessed. The current density (Jph) value increased from 2.17 to 4.7 mA·cm−2 upon raising the light power density from 50 to 100 mW·cm−2 . Moreover the enthalpy (∆H*) and entropy (∆S*) values of Cu/CuO electrode were determined as 9.519 KJ mol−1 and 180.4 JK−1 ·mol−1 respectively. The results obtained in the present study are very promising for solving the problem of energy in far regions by converting sewage water to H2 fuel.
Comparison of Hydrogen Powertrains with the Battery Powered Electric Vehicle and Investigation of Small-Scale Local Hydrogen Production Using Renewable Energy
Jan 2021
Publication
Climate change is one of the major problems that people face in this century with fossil fuel combustion engines being huge contributors. Currently the battery powered electric vehicle is considered the predecessor while hydrogen vehicles only have an insignificant market share. To evaluate if this is justified different hydrogen power train technologies are analyzed and compared to the battery powered electric vehicle. Even though most research focuses on the hydrogen fuel cells it is shown that despite the lower efficiency the often-neglected hydrogen combustion engine could be the right solution for transitioning away from fossil fuels. This is mainly due to the lower costs and possibility of the use of existing manufacturing infrastructure. To achieve a similar level of refueling comfort as with the battery powered electric vehicle the economic and technological aspects of the local small-scale hydrogen production are being investigated. Due to the low efficiency and high prices for the required components this domestically produced hydrogen cannot compete with hydrogen produced from fossil fuels on a larger scale
Gas Transition: Renewable Hydrogen’s Future in Eastern Australia’s Energy Networks
Jul 2021
Publication
The energy transition for a net-zero future will require deep decarbonisation that hydrogen is uniquely positioned to facilitate. This technoeconomic study considers renewable hydrogen production transmission and storage for energy networks using the National Electricity Market (NEM) region of Eastern Australia as a case study. Plausible growth projections are developed to meet domestic demands for gas out to 2040 based on industry commitments and scalable technology deployment. Analysis using the discounted cash flow technique is performed to determine possible levelised cost figures for key processes out to 2050. Variables include geographic limitations growth rates and capacity factors to minimise abatement costs compared to business-as-usual natural gas forecasts. The study provides an optimistic outlook considering renewable power-to-X opportunities for blending replacement and gas-to-power to show viable pathways for the gas transition to green hydrogen. Blending is achievable with modest (3%) green premiums this decade and substitution for natural gas combustion in the long-term is likely to represent an abatement cost of AUD 18/tCO2-e including transmission and storage.
Lessons Learned from Australian Infrastructure Upgrades
Feb 2020
Publication
This report fulfils Deliverable Five for Research Project 2.1-01 of the Future Fuels CRC. The aims of this project Crystallising lessons learned from major infrastructure upgrades are to provide a report on lessons learned from earlier infrastructure upgrades and fuel transitions and identify tools that can be used to develop consistent messaging around the proposed transition to hydrogen and/or other low-carbon fuels. In both the report and the toolkit there are recommendations on how to apply lessons learned and shape messaging throughout the value chain based on prior infrastructure upgrades.
This report presents three Australian case studies that that are relevant to the development of future fuels: the transition from town gas to natural gas the use of ethanol and LPG as motor fuels and the development of coal seam gas resources. Drawing on published information each case study provides an account of the issues that arose during the upgrade or transition and of the approaches through which industry and government stakeholders managed these issues. From these accounts lessons are identified that can guide stakeholder engagement in future infrastructure upgrades and fuel transitions. The findings from the case studies and academic literature have been used to develop an accompanying draft toolkit for use by FFCRC stakeholders.
The report also distils applicable lessons and frameworks from academic literature about stakeholder analysis megaprojects and the social acceptance of industries and technologies. This report is meant to be used in conjunction with a companion toolkit that provides a framework for making coordinated decisions across the fuel value chain.
You can read the full report on the Future Fuels CRC website here
This report presents three Australian case studies that that are relevant to the development of future fuels: the transition from town gas to natural gas the use of ethanol and LPG as motor fuels and the development of coal seam gas resources. Drawing on published information each case study provides an account of the issues that arose during the upgrade or transition and of the approaches through which industry and government stakeholders managed these issues. From these accounts lessons are identified that can guide stakeholder engagement in future infrastructure upgrades and fuel transitions. The findings from the case studies and academic literature have been used to develop an accompanying draft toolkit for use by FFCRC stakeholders.
The report also distils applicable lessons and frameworks from academic literature about stakeholder analysis megaprojects and the social acceptance of industries and technologies. This report is meant to be used in conjunction with a companion toolkit that provides a framework for making coordinated decisions across the fuel value chain.
You can read the full report on the Future Fuels CRC website here
Recent Advances in Seawater Electrolysis
Jan 2022
Publication
Hydrogen energy as a clean and renewable energy has attracted much attention in recent years. Water electrolysis via the hydrogen evolution reaction at the cathode coupled with the oxygen evolution reaction at the anode is a promising method to produce hydrogen. Given the shortage of freshwater resources on the planet the direct use of seawater as an electrolyte for hydrogen production has become a hot research topic. Direct use of seawater as the electrolyte for water electrolysis can reduce the cost of hydrogen production due to the great abundance and wide availability. In recent years various high-efficiency electrocatalysts have made great progress in seawater splitting and have shown great potential. This review introduces the mechanisms and challenges of seawater splitting and summarizes the recent progress of various electrocatalysts used for hydrogen and oxygen evolution reaction in seawater electrolysis in recent years. Finally the challenges and future opportunities of seawater electrolysis for hydrogen and oxygen production are presented.
Indicative Analysis of Blending Hydrogen in Gas Networks
May 2020
Publication
Frontier Economics has been engaged by the Commonwealth Department of the Environment and Energy (now Industry Science Energy and Resources) (the Department) to undertake an indicative analysis of the economics of blending hydrogen in Australian natural gas distribution networks. Our analysis is limited to a specific gas distribution network servicing urban areas of Melbourne.
We have investigated the economics of blending hydrogen in a natural gas distribution network by examining a number of energy supply options including options that involve blending hydrogen. While we consider that these cases we have examined are useful for understanding the economics of hydrogen blending at low rates in Victoria and for understanding the factors that are likely to drive the economics of blending at higher rates or in other regions it cannot be assumed that the results we find for the cases we investigate will necessarily apply in other regions or for blending at other rates. This report should be read as an assessment of the specific cases we have investigated and our findings cannot necessarily be extended to other cases (such as other locations or other rates of blending)"
The full report can be found via the website of the Australian government at this link
We have investigated the economics of blending hydrogen in a natural gas distribution network by examining a number of energy supply options including options that involve blending hydrogen. While we consider that these cases we have examined are useful for understanding the economics of hydrogen blending at low rates in Victoria and for understanding the factors that are likely to drive the economics of blending at higher rates or in other regions it cannot be assumed that the results we find for the cases we investigate will necessarily apply in other regions or for blending at other rates. This report should be read as an assessment of the specific cases we have investigated and our findings cannot necessarily be extended to other cases (such as other locations or other rates of blending)"
The full report can be found via the website of the Australian government at this link
H2 Green Hydrogen Discussion Paper: Victorian Hydrogen Investment Program
Nov 2019
Publication
This discussion paper is for stakeholders who would like to shape the development of Victoria’s emerging green hydrogen sector identifying competitive advantages and priority focus areas for industry and the Victorian Government.<br/>The Victorian Government is using this paper to focus on the economic growth and sector development opportunities emerging for a Victorian hydrogen industry powered by renewable energy also known as ‘green’ hydrogen. In addition this paper seeks input from all stakeholders on how where and when the Victorian Government can act to establish a thriving green hydrogen economy.<br/>Although green hydrogen is the only type of hydrogen production within the scope of this discussion paper the development of the VHIP aligns with the policies projects and initiatives which support these other forms of hydrogen production. The VHIP is considering the broad policy landscape and actively coordinating with related hydrogen programs policies and strategies under development including the Council of Australian Governments (COAG) Energy Council’s National Hydrogen Strategy to ensure a complementary approach. In Victoria there are several programs and strategies in development and underway that have linkages with hydrogen and the VHIP.
The Global Status of CCS 2019: Targeting Climate Change
Dec 2019
Publication
CCS is an emissions reduction technology critical to meeting global climate targets. The Global Status of CCS 2019 documents important milestones for CCS over the past 12 months its status across the world and the key opportunities and challenges it faces. We hope this report will be read and used by governments policy-makers academics media commentators and the millions of people who care about our climate.
Promotion Effect of Proton-conducting Oxide BaZr0.1Ce0.7Y0.2O3−δ on the Catalytic Activity of Ni Towards Ammonia Synthesis from Hydrogen and Nitrogen
Aug 2018
Publication
In this report for the first time it has been observed that proton-conducting oxide BaZr0.1Ce0.7Y0.2O3−δ (BZCY) has significant promotion effect on the catalytic activity of Ni towards ammonia synthesis from hydrogen and nitrogen. Renewable hydrogen can be used for ammonia synthesis to save CO2 emission. By investigating the operating parameters of the reaction the optimal conditions for this catalyst were identified. It was found that at 620 °C with a total flow rate of 200 mL min−1 and a H2/N2 mol ratio of 3 an activity of approximately 250 μmol g−1 h−1 can be achieved. This is ten times larger than that for the unpromoted Ni catalyst under the same conditions although the stability of both catalysts in the presence of steam was not good. The specific activity of Ni supported on proton-conducting oxide BZCY is approximately 72 times higher than that of Ni supported on non-proton conductor MgO-CeO2. These promotion effects were suspected to be due to the proton conducting nature of the support. Therefore it is proposed that the use of proton conducting support materials with highly active ammonia synthesis catalysts such as Ru and Fe will provide improved activity of at lower temperatures.
Future Fuels Strategy: Discussion Paper Powering Choice
Feb 2021
Publication
New vehicle technologies and fuels will drive the future of road transport in Australia. Increased availability of battery electric vehicles hydrogen fuel cell vehicles biofuels and associated recharging and refuelling infrastructure will:
- give consumers more choice
- provide productivity emissions reduction fuel security and air quality benefits
Closing the Regulatory Gaps and Advancing Hydrogen Infrastructure Deployment in Australia
Sep 2019
Publication
With downward trends in Australian equipment manufacturing there are increased numbers of overseas designed manufactured and certified hydrogen systems being introduced into Australia. In parallel there are also opportunities for hydrogen and its carriers to be exported to overseas. Certainty of reputable codes and standards is important to meet regulatory requirements and community safety expectations locally and overseas.
This paper is a progress report of Hydrogen Mobility Australia’s (HMA) Technical Committee on mapping the regulatory codes and standards (RCS) gaps in Australia and establishing a pathway together with Standards Australia and Commonwealth and State Governments. This paper will discuss the benefits of the pathway covering the areas of:
This paper is a progress report of Hydrogen Mobility Australia’s (HMA) Technical Committee on mapping the regulatory codes and standards (RCS) gaps in Australia and establishing a pathway together with Standards Australia and Commonwealth and State Governments. This paper will discuss the benefits of the pathway covering the areas of:
- Safety – Enable Australia to implement consensual rules to minimise avoidable risks to persons and goods to an acceptable level
- Environment – Ensure protection of the environment from unacceptable damage due to the operation and effects of products processes and services linked to hydrogen
- Elimination of barriers to trade – Provide consistency between international jurisdictions enabling streamlined entry of hydrogen related equipment from overseas
- Upskilling of Australian industry participants – Gain useful learnings from countries more advanced in their progress in implementing ISO standards and hydrogen sector development
A Chicken and Egg Situation: Enhancing Emergency Service Workers' Knowledge of Hydrogen
Sep 2021
Publication
This paper reports on the results of interviews conducted with 21 representatives from emergency services organisations within Australia and New Zealand. With a relative emergent industry such as future fuels a chicken and egg situation does emerge with regards to how much training needs to be in place in advance of large-scale industry development or not. These respondents were employed in a variety of roles being directly involved in research and training of emerging technologies frontline operational managers and other senior roles across the emergency services sector. Participants' responses to a series of questions were able to provide insights into the state of knowledge and training requirements within their organisations in relation to hydrogen and other future fuels. The findings suggest that formal and informal processes currently exist to support the knowledge development and transferal around the adoption of hydrogen and other future fuels. From the interviews it became clear that there are a number of processes that have emerged from the experiences gained through the implementation of rooftop solar PV and battery storage that provide some background context for advancing future fuels information across the sector. Because safety is a critical component for securing a social licence to operate engagement and knowledge sharing with any representatives from across this sector will only help to build confidence in the industry. Similarly because interviewees were very keen to access information they expressed a clear willingness to learn more through more formalised relationships rather than an ad hoc information seeking that has been employed to date. The presentation will identify key recommendations and also highlight the importance of QR Codes in the emergency responder landscape. Implications for industry and policy makers are discussed.
Healthy Power: Reimagining Hospitals as Sustainable Energy Hubs
Oct 2020
Publication
Human health is a key pillar of modern conceptions of sustainability. Humanity pays a considerable price for its dependence on fossil-fueled energy systems which must be addressed for sustainable urban development. Public hospitals are focal points for communities and have an opportunity to lead the transition to renewable energy. We have reimagined the healthcare energy ecosystem with sustainable technologies to transform hospitals into networked clean energy hubs. In this concept design hydrogen is used to couple energy with other on-site medical resource demands and vanadium flow battery technology is used to engage the public with energy systems. This multi-generation system would reduce harmful emissions while providing reliable services tackling the linked issues of human and environmental health.
Modeling of Thermal Performance of a Commercial Alkaline Electrolyzer Supplied with Various Electrical Currents
Nov 2021
Publication
Hydrogen produced by solar and other clean energy sources is an essential alternative to fossil fuels. In this study a commercial alkaline electrolyzer with different cell numbers and electrode areas are simulated for different pressure temperature thermal resistance and electrical current. This alkaline electrolyzer is considered unsteady in simulations and different parameters such as temperature are obtained in terms of time. The obtained results are compared with similar results in the literature and good agreement is observed. Various characteristics of this alkaline electrolyzer as thermoneutral voltage faraday efficiency and cell voltage are calculated and displayed. The outlet heat rate and generated heat rate are obtained as well. The pressure and the temperature in the simulations are between 1 and 100 bar and between 300 and 360 Kelvin respectively. The results show that the equilibrium temperature is reached 2-3 hours after the time when the Alkaline electrolyzer starts to work.
Blending Ammonia into Hydrogen to Enhance Safety through Reduced Burning Velocity
Sep 2019
Publication
Laminar burning velocities (SL) of hydrogen/ammonia mixtures in air at atmospheric pressure were studied experimentally and numerically. The blending of hydrogen with ammonia two fuels that have been proposed as promising carriers for renewable energy causes the laminar flame speed of the mixture SL to decrease significantly. However details of this have not previously available. Systematic measurements were therefore performed for a series of hydrogen/ammonia mixtures with wide ranges of mole fractions of blended ammonia (XNH3) and equivalence ratio using a heat flux method based on heat flux of a flat flame transferred to the burner surface. It was found that the mixture of XNH3 = 40% has a value of SL close to that of methane which is the dominant component of natural gas. Using three chemical kinetic mechanisms available in the literature i.e. the well-known GRI-Mech 3.0 mechanism and two mechanisms recently released SL were also modelled for the cases studied. However the discrepancies between the experimental and numerical results can exceed 50% with the GRI-Mech 3.0 mechanism. Discrepancies were also found between the numerical results obtained with different mechanisms. These results can contribute to an increase in both the safety and efficiency of the coutilization of these two types of emerging renewable fuel and to guiding the development of better kinetic models.
Hydrogen for Renewable Energy Export: Broadening the Concept of Hydrogen Safety
Sep 2019
Publication
Recently we have seen hydrogen (re)emerge as an important component of widespread decarbonisation of energy sectors. From an Australian perspective this brings with it an opportunity to store transport and export renewable energy—either as liquefied hydrogen or in a carrier such as ammonia. The growth of the hydrogen industry to now include the power and transport sectors as well as the notion of hydrogen export has broadened the range of safety considerations required and seen them extend into the realm of the consumer for the first time.<br/>Hydrogen as well as ammonia and other carriers such as methanol are existing industrial chemicals which have established protocols for their handling and use in the chemicals sector. As their use in energy and transport increases especially in the context of widespread domestic use their handling and use by inexperienced people in less-controlled environments expands shifting the risk profiles and management systems required. There is also the potential for novel hydrogen carriers such as methylcyclohexane/toluene to reach commercial viability at industrial scale.<br/>This paper will discuss some of these emerging applications of hydrogen and its carriers and discuss some of the technological innovations under development that may accompany a new energy industry— with some consideration given to their potential risks and the required safety considerations. In addition we will also provide an overview of global activity in this area and how new standards and regulations would need to be developed for the adaption of these technologies in an Australian context.
An Analysis of Emerging Renewable Hydrogen Policy through an Energy Democracy Lens: The Case of Australia
Mar 2024
Publication
As part of reducing carbon emissions governments across the world are working on measures to transition sectors of the economy away from fossil fuels. The socio-technical regimes being constructed around the energy transition can encourage energy centralisation and constrain actor engagement without proper policy and planning. The energy transition is liable to have significant impacts across all of society but less attention has been given to the role of democratic participation and decision-making in the energy system during this time. Using the energy democracy framework developed by Kacper Szulecki we employ content analysis to investigate how Australia’s renewable hydrogen strategies at the Commonwealth and state levels engage with the broader objective of democratising energy systems. Based on our findings we recommend ways to support a renewable hydrogen regime in Australia in line with the principles of energy democracy such as community engagement built-in participation popular sovereignty community-level agency and civic ownership. This study provides a perspective on the energy transition that is often overlooked and a reminder to policymakers that the topology of an energy transition can take many forms.
Open-cathode PEMFC Heat Utilisation to Enhance Hydrogen Supply Rate of Metal Hydride Canisters
Mar 2019
Publication
In this paper the hydrogen supply to an open-cathode PEM fuel cell (FC) by using metal hydride (MH) storage and thermal coupling between these two components are investigated theoretically. One of the challenges in using MH hydrogen storage canisters is their limited hydrogen supply rate as the hydrogen release from MH is an endothermic reaction. Therefore in order to meet the required hydrogen supply rate high amounts of MH should be employed that usually suggests storage of hydrogen to be higher than necessary for the application adding to the size weight and cost of the system. On the other hand the exhaust heat (i.e. that is usually wasted if not utilised for this purpose) from open-cathode FCs is a low-grade heat. However this heat can be transferred to MH canisters through convection to heat them up and increase their hydrogen release rate. A mathematical model is used to simulate the heat transfer between PEMFC exhaust heat and MH storage. This enables the prediction of the required MH for different FC power levels with and without heat supply to the MH storage. A 2.5-kW open-cathode FC is used to measure the exhaust air temperature at different output powers. It was found that in the absence of heat supply from the FC to the MH canisters significantly higher number of MH canisters are required to achieve the required rate of hydrogen supply to the FC for sustained operation (specially at high power outputs). However using the exhaust hot air from the FC to supply heat to the MH storage can reduce the number of the MH canisters required by around 40% to 70% for power output levels ranging from 500 W to 2000 W.
A Review on Underground Hydrogen Storage: Insight into Geological Sites, Influencing Factors and Future Outlook
Dec 2021
Publication
Without remorse fossil fuels have made a huge contribution to global development in all of its forms. However the recent scientific outlooks are currently shifting as more research is targeted towards promoting a carbon-free economy in addition to the use of electric power from renewable sources. While renewable energy sources may be a solution to the anthropogenic greenhouse gas (GHG) emissions from fossil fuel they are yet season-dependent faced with major atmospheric drawbacks which when combined with annually varying but steady energy demand results in renewable energy excesses or deficits. Therefore it is essential to devise a long-term storage medium to balance their intermittent demand and supply. Hydrogen (H2) as an energy vector has been suggested as a viable method of achieving the objectives of meeting the increasing global energy demand. However successful implementation of a full-scale H2 economy requires large-scale H2 storage (as H2 is highly compressible). As such storage of H2 in geological formations has been considered as a potential solution where it can be withdrawn again at the larger stage for utilization. Thus in this review we focus on the potential use of geological formations for large-scale underground hydrogen storage (UHS) where both conventional and non-conventional UHS options were examined in depth. Also insights into some of the probable sites and the related examined criteria for selection were highlighted. The hydrodynamics of UHS influencing factors (including solid fluid and solid–fluid interactions) are summarized exclusively. In addition the economics and reaction perspectives inherent to UHS have been examined. The findings of this study show that UHS like other storage systems is still in its infancy. Further research and development are needed to address the significant hurdles and research gaps found particularly in replaceable influencing parameters. As a result this study is a valuable resource for UHS researchers.
Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach
Jan 2022
Publication
Adoption of hydrogen energy as an alternative to fossil fuels could be a major step towards decarbonising and fulfilling the needs of the energy sector. Hydrogen can be an ideal alternative for many fields compared with other alternatives. However there are many potential environmental challenges that are not limited to production and distribution systems but they also focus on how hydrogen is used through fuel cells and combustion pathways. The use of hydrogen has received little attention in research and policy which may explain the widely claimed belief that nothing but water is released as a by-product when hydrogen energy is used. We adopt systems thinking and system dynamics approaches to construct a conceptual model for hydrogen energy with a special focus on the pathways of hydrogen use to assess the potential unintended consequences and possible interventions; to highlight the possible growth of hydrogen energy by 2050. The results indicate that the combustion pathway may increase the risk of the adoption of hydrogen as a combustion fuel as it produces NOx which is a key air pollutant that causes environmental deterioration which may limit the application of a combustion pathway if no intervention is made. The results indicate that the potential range of global hydrogen demand is rising ranging from 73 to 158 Mt in 2030 73 to 300 Mt in 2040 and 73 to 568 Mt in 2050 depending on the scenario presented.
Delivering a Safe, Viable Hydrogen Economy in Australia
Sep 2019
Publication
At Woodside Energy Ltd (Woodside) safety is built into everything we do and progressing hydrogen opportunities is no exception. This paper will present information from the macro level of process safety for hydrogen at a plant level through to the consumer experience. Examples of the benefits of an integrated process safety approach will be used from Woodside’s experience pioneering the liquefied natural gas industry in Australia.<br/>This paper will underscore the reasons why Australia needs to adopt robust safety standards for hydrogen as quickly as possible in order to advance the hydrogen economy across all sectors. Focus areas requiring attention during development of standards and potential mechanisms to close will be proposed. Establishing a hydrogen economy in Australia could lower carbon emissions stabilise power grids increase renewable energy penetration and create jobs. Developing Australian standards that are fully aligned with international standards will facilitate Australia taking a leading role in the global hydrogen economy.
Early Community Engagement with Hydrogen in Australia
Sep 2019
Publication
Community support and acceptance is part of the licence to operate for any industry. The hydrogen industry is no different and we will need to have strong support from the broad community to establish a viable hydrogen economy in Australia.<br/>As Woodside progresses our plans for bulk hydrogen export and associated domestic opportunities stakeholder engagement throughout will be critical to success. This talk will share Woodside’s approach to community engagement and local opportunities and how we plan to draw on more than 30 years’ experience operating liquefied natural gas plants in Western Australia’s Pilbara region.<br/>At this early stage of our hydrogen work we are beginning with the end in mind: engaging the customer. We’ve worked with local Australian businesses to help raise public awareness and interest in hydrogen by producing prototype consumer products. We will share experiences from this work that underscore the value of early engagement with all stakeholders: government regulators industrial and community neighbours and end consumers to enable the hydrogen economy vision for Australia. This paper will present information on community engagement and acceptance of hydrogen in Australia.<br/>This information has come from Woodside Energy Ltd by engaging with small businesses government regulators and the community at large. As we establish community acceptance for hydrogen as an energy carrier in Australia Woodside has been working in parallel to have standards and regulations established for hydrogen in Australia. Through our work with Hydrogen Mobility Australia we are advocating the adoption of ISO standards unless there is a specific geographic or health safety and environment reason not to.
HyP SA – Our safety story
Sep 2019
Publication
Australian Gas Infrastructure Group’s (AGIG’s) vision is to be the leading gas infrastructure business in Australia this means delivering for our customers being a good employer and being sustainably cost efficient. Establishing and developing a hydrogen industry is a key pathway for us to achieve our vision.
In South Australia AGIG is pioneering the introduction of hydrogen into its existing gas distribution networks through the Hydrogen Park South Australia (HyP SA) project. With safety our top priority we would like to give an overview of the safety considerations of our site our network methodology and the development of new safety procedures and culture regarding the production handling and reticulation of a 5% hydrogen blend.
We will cover three themes each having a safety story that is specific to the Australian context and to the project’s success:
The Production Plant and Site
Project site safety known hazards and risk mitigation electrical protection safety procedures lighting and security. Hydrogen storage filling and transportation.
The Network
Securing the network for an isolated safe demonstration footprint. Gas network and hydrogen safety considerations why 5%? Emergency procedures and crew training. New safety regulations blended networks. How does hydrogen perform in a blended gas with respect to leaks? How safe is the existing network and what sensors and controls are we using.
The Home
Introducing blended gas to existing homes. Appliance safety and failure mode analysis. Community engagement and education on a 5% renewable hydrogen gas blend and use in the home
.
We aim to give a comprehensive overview of delivering a safe demonstration network for the HyP SA project in terms of the three main ecosystems that the hydrogen will be present our learnings so far and the development of the safety methodologies that will be applied in the industry in the future.
In South Australia AGIG is pioneering the introduction of hydrogen into its existing gas distribution networks through the Hydrogen Park South Australia (HyP SA) project. With safety our top priority we would like to give an overview of the safety considerations of our site our network methodology and the development of new safety procedures and culture regarding the production handling and reticulation of a 5% hydrogen blend.
We will cover three themes each having a safety story that is specific to the Australian context and to the project’s success:
The Production Plant and Site
Project site safety known hazards and risk mitigation electrical protection safety procedures lighting and security. Hydrogen storage filling and transportation.
The Network
Securing the network for an isolated safe demonstration footprint. Gas network and hydrogen safety considerations why 5%? Emergency procedures and crew training. New safety regulations blended networks. How does hydrogen perform in a blended gas with respect to leaks? How safe is the existing network and what sensors and controls are we using.
The Home
Introducing blended gas to existing homes. Appliance safety and failure mode analysis. Community engagement and education on a 5% renewable hydrogen gas blend and use in the home
.
We aim to give a comprehensive overview of delivering a safe demonstration network for the HyP SA project in terms of the three main ecosystems that the hydrogen will be present our learnings so far and the development of the safety methodologies that will be applied in the industry in the future.
Sustainable Power Supply Solutions for Off-Grid Base Stations
Sep 2015
Publication
The telecommunication sector plays a significant role in shaping the global economy and the way people share information and knowledge. At present the telecommunication sector is liable for its energy consumption and the amount of emissions it emits in the environment. In the context of off-grid telecommunication applications off-grid base stations (BSs) are commonly used due to their ability to provide radio coverage over a wide geographic area. However in the past the off-grid BSs usually relied on emission-intensive power supply solutions such as diesel generators. In this review paper various types of solutions (including in particular the sustainable solutions) for powering BSs are discussed. The key aspects in designing an ideal power supply solution are reviewed and these mainly include the pre-feasibility study and the thermal management of BSs which comprise heating and cooling of the BS shelter/cabinets and BS electronic equipment and power supply components. The sizing and optimization approaches used to design the BSs’ power supply systems as well as the operational and control strategies adopted to manage the power supply systems are also reviewed in this paper.
Communicating Leakage Risk in the Hydrogen Economy: Lessons Already Learned from Geoenergy Industries
Sep 2019
Publication
Hydrogen may play a crucial part in delivering a net zero emissions future. Currently hydrogen production storage transport and utilisation are being explored to scope opportunities and to reduce barriers to market activation. One such barrier could be negative public response to hydrogen technologies. Previous research around socio-technical risks finds that public acceptance issues are particularly challenging for emerging remote technical sensitive uncertain or unfamiliar technologies - such as hydrogen. Thus while the hydrogen value chain could offer a range of potential environmental economic and social benefits each will have perceived risks that could challenge the introduction and subsequent roll-out of hydrogen. These potential issues must be identified and managed so that the hydrogen sector can develop adapt or respond appropriately. Geological storage of hydrogen could present challenges in terms of perceived safety. Valuable lessons can be learned from international research and practice of CO2 and natural gas storage in geological formations (for carbon capture and storage CCS and for power respectively). Here we explore these learnings. We consider the similarities and differences between these technologies and how these may affect perceived risks. We also reflect on lessons for effective communication and community engagement. We draw on this to present potential risks to the perceived safety of - and public acceptability of – the geological storage of hydrogen. One of the key lessons learned from CCS and natural gas storage is that progress is most effective when risk communication and public acceptability is considered from the early stages of technology development.
Autoignition of Hydrogen/Ammonia Blends at Elevated Pressures and Temperatures
Sep 2019
Publication
Hydrogen stored or transported as ammonia has been proposed as a sustainable carbon-free alternative for fossil-fuels in high-temperature industrial processes including power generation. Although ammonia itself is toxic and exhibits both a low flame speed and calorific value it rapidly decomposes to hydrogen in high temperature environments suggesting the potential use in applications which incorporate fuel preheating. In this work the rate of ammonia-to-hydrogen decomposition is initially simulated at elevated temperatures to indicate the proportion of fuel conversion in conditions similar to gas pipelines gas-turbines or furnaces with exhaust-gas recirculation. Following this different proportions of hydrogen and ammonia are numerically simulated in independent zero-dimensional plug-flow-reactors at pressures ranging from atmospheric to 50 MPa and pre-heating temperatures from 600 K to 1600 K. Deflagration of very-lean-to-fuel-rich mixtures was investigated employing air as the oxidant stream. Analyses of these reactors provide estimates of autoignition thresholds of the hydrogen/ammonia blends which are relevant for the safe implementation and operation of hydrogen/ammonia blends or pure ammonia as a fuel source. Further operational considerations are subsequently identified for using ammonia or hydrogen/ammonia blends as a hydrogen fuel carrier by quantifying residual concentrations of hydrogen and ammonia fuel products as well as other toxic emissions within the hot exhaust products.
Assessing the Viability of the ACT Natural Gas Distribution Network for Reuse as a Hydrogen Distribution Network
Sep 2019
Publication
The Australian Capital Territory (ACT) has legislated and aims to be net zero emissions by 2045. Such ambitious targets have implications for the contribution of hydrogen and its storage in gas distribution networks Therefore we need to understand now the impacts on the gas distribution network of the transition to 100% hydrogen. Assessment of the viability of decarbonising the ACT gas network will be partly based on the cost of reusing the gas network for the safe and reliable distribution of hydrogen. That task requires each element of the natural gas safety management system to be evaluated.
This article describes the construction of a test facility in Canberra Australia used to identify issues raised by 100% hydrogen use in the medium pressure distribution network consisting of nylon and polyethylene (PE) as a means of identifying measures necessary to ensure ongoing validity of the network's regulatory safety case.
Evoenergy (the ACT's gas distribution company) have constructed a Test Facility incorporating an electrolyser a gas supply pressure reduction and mixing skid a replica gas network and a domestic installation with gas appliances. Jointly with Australian National University (ANU) and Canberra Institute of Technology (CIT) the Company has commenced a program of “bench testing” initially with 100% hydrogen to identify gaps in the safety case specifically focusing on the materials work practices and safety systems in the ACT.
The facility is designed to assess:
The paper addresses major safety issues relating to the production/storage distribution and consumer end use of hydrogen injected into existing gas distribution networks. The analysis is guided by the Safety Management System. The Hydrogen Testing Facility described in the paper provide tools for evaluation of hydrogen safety matters in the ACT and Australia-wide.
Testing to date has confirmed that polyethylene and nylon pipe and their respective jointing techniques can contain 100% hydrogen at pressures used for the distribution of natural gas. Testing has also confirmed that current installation work practices on polyethylene and nylon pipe and joints are suitable for hydrogen service. This finding is subject to variation attributable to staff training and skill levels and further testing has been programmed as outlined in this paper.
Testing of gas isolation by clamping and simulated repair on the hydrogen network has established that standard natural gas isolation techniques work with 100% hydrogen at natural gas pressures.
This article describes the construction of a test facility in Canberra Australia used to identify issues raised by 100% hydrogen use in the medium pressure distribution network consisting of nylon and polyethylene (PE) as a means of identifying measures necessary to ensure ongoing validity of the network's regulatory safety case.
Evoenergy (the ACT's gas distribution company) have constructed a Test Facility incorporating an electrolyser a gas supply pressure reduction and mixing skid a replica gas network and a domestic installation with gas appliances. Jointly with Australian National University (ANU) and Canberra Institute of Technology (CIT) the Company has commenced a program of “bench testing” initially with 100% hydrogen to identify gaps in the safety case specifically focusing on the materials work practices and safety systems in the ACT.
The facility is designed to assess:
- Materials in use including aged network materials and components
- Construction and installation techniques both greenfield and live gas work
- Purging and filling techniques
- Leak detection both underground and above ground
- Emergency response and make safe techniques
- Issues associated with use of hydrogen in light commercial and domestic appliances.
- Technicians and gas fitters on infrastructure installation and management
- Emergency response services on responding to hydrogen related emergencies in a network environment; and
- Manage public perceptions of hydrogen in a network environment.
The paper addresses major safety issues relating to the production/storage distribution and consumer end use of hydrogen injected into existing gas distribution networks. The analysis is guided by the Safety Management System. The Hydrogen Testing Facility described in the paper provide tools for evaluation of hydrogen safety matters in the ACT and Australia-wide.
Testing to date has confirmed that polyethylene and nylon pipe and their respective jointing techniques can contain 100% hydrogen at pressures used for the distribution of natural gas. Testing has also confirmed that current installation work practices on polyethylene and nylon pipe and joints are suitable for hydrogen service. This finding is subject to variation attributable to staff training and skill levels and further testing has been programmed as outlined in this paper.
Testing of gas isolation by clamping and simulated repair on the hydrogen network has established that standard natural gas isolation techniques work with 100% hydrogen at natural gas pressures.
Complex Metal Hydrides for Hydrogen, Thermal and Electrochemical Energy Storage
Oct 2017
Publication
Hydrogen has a very diverse chemistry and reacts with most other elements to form compounds which have fascinating structures compositions and properties. Complex metal hydrides are a rapidly expanding class of materials approaching multi-functionality in particular within the energy storage field. This review illustrates that complex metal hydrides may store hydrogen in the solid state act as novel battery materials both as electrolytes and electrode materials or store solar heat in a more efficient manner as compared to traditional heat storage materials. Furthermore it is highlighted how complex metal hydrides may act in an integrated setup with a fuel cell. This review focuses on the unique properties of light element complex metal hydrides mainly based on boron nitrogen and aluminum e.g. metal borohydrides and metal alanates. Our hope is that this review can provide new inspiration to solve the great challenge of our time: efficient conversion and large-scale storage of renewable energy.
A Comparative Technoeconomic Analysis of Renewable Hydrogen Production Using Solar Energy
May 2016
Publication
A technoeconomic analysis of photoelectrochemical (PEC) and photovoltaic-electrolytic (PV-E) solar-hydrogen production of 10 000 kg H2 day−1 (3.65 kilotons per year) was performed to assess the economics of each technology and to provide a basis for comparison between these technologies as well as within the broader energy landscape. Two PEC systems differentiated primarily by the extent of solar concentration (unconcentrated and 10× concentrated) and two PV-E systems differentiated by the degree of grid connectivity (unconnected and grid supplemented) were analyzed. In each case a base-case system that used established designs and materials was compared to prospective systems that might be envisioned and developed in the future with the goal of achieving substantially lower overall system costs. With identical overall plant efficiencies of 9.8% the unconcentrated PEC and non-grid connected PV-E system base-case capital expenses for the rated capacity of 3.65 kilotons H2 per year were $205 MM ($293 per m2 of solar collection area (mS−2) $14.7 WH2P−1) and $260 MM ($371 mS−2 $18.8 WH2P−1) respectively. The untaxed plant-gate levelized costs for the hydrogen product (LCH) were $11.4 kg−1 and $12.1 kg−1 for the base-case PEC and PV-E systems respectively. The 10× concentrated PEC base-case system capital cost was $160 MM ($428 mS−2 $11.5 WH2P−1) and for an efficiency of 20% the LCH was $9.2 kg−1. Likewise the grid supplemented base-case PV-E system capital cost was $66 MM ($441 mS−2 $11.5 WH2P−1) and with solar-to-hydrogen and grid electrolysis system efficiencies of 9.8% and 61% respectively the LCH was $6.1 kg−1. As a benchmark a proton-exchange membrane (PEM) based grid-connected electrolysis system was analyzed. Assuming a system efficiency of 61% and a grid electricity cost of $0.07 kWh−1 the LCH was $5.5 kg−1. A sensitivity analysis indicated that relative to the base-case increases in the system efficiency could effect the greatest cost reductions for all systems due to the areal dependencies of many of the components. The balance-of-systems (BoS) costs were the largest factor in differentiating the PEC and PV-E systems. No single or combination of technical advancements based on currently demonstrated technology can provide sufficient cost reductions to allow solar hydrogen to directly compete on a levelized cost basis with hydrogen produced from fossil energy. Specifically a cost of CO2 greater than ∼$800 (ton CO2)−1 was estimated to be necessary for base-case PEC hydrogen to reach price parity with hydrogen derived from steam reforming of methane priced at $12 GJ−1 ($1.39 (kg H2)−1). A comparison with low CO2 and CO2-neutral energy sources indicated that base-case PEC hydrogen is not currently cost-competitive with electrolysis using electricity supplied by nuclear power or from fossil-fuels in conjunction with carbon capture and storage. Solar electricity production and storage using either batteries or PEC hydrogen technologies are currently an order of magnitude greater in cost than electricity prices with no clear advantage to either battery or hydrogen storage as of yet. Significant advances in PEC technology performance and system cost reductions are necessary to enable cost-effective PEC-derived solar hydrogen for use in scalable grid-storage applications as well as for use as a chemical feedstock precursor to CO2-neutral high energy-density transportation fuels. Hence such applications are an opportunity for foundational research to contribute to the development of disruptive approaches to solar fuels generation systems that can offer higher performance at much lower cost than is provided by current embodiments of solar fuels generators. Efforts to directly reduce CO2 photoelectrochemically or electrochemically could potentially produce products with higher value than hydrogen but many as yet unmet challenges include catalytic efficiency and selectivity and CO2 mass transport rates and feedstock cost. Major breakthroughs are required to obtain viable economic costs for solar hydrogen production but the barriers to achieve cost-competitiveness with existing large-scale thermochemical processes for CO2 reduction are even greater.
Towards Climate Resilient Urban Energy Systems: A Review
Jun 2020
Publication
Climate change and increased urban population are two major concerns for society. Moving towards more sustainable energy solutions in the urban context by integrating renewable energy technologies supports decarbonizing the energy sector and climate change mitigation. A successful transition also needs adequate consideration of climate change including extreme events to ensure the reliable performance of energy systems in the long run. This review provides an overview of and insight into the progress achieved in the energy sector to adapt to climate change focusing on the climate resilience of urban energy systems. The state-of-the-art methodology to assess impacts of climate change including extreme events and uncertainties on the design and performance of energy systems is described and discussed. Climate resilience is an emerging concept that is increasingly used to represent the durability and stable performance of energy systems against extreme climate events. However it has not yet been adequately explored and widely used as its definition has not been clearly articulated and assessment is mostly based on qualitative aspects. This study reveals that a major limitation in the state-of-the-art is the inadequacy of climate change adaptation approaches in designing and preparing urban energy systems to satisfactorily address plausible extreme climate events. Furthermore the complexity of the climate and energy models and the mismatch between their temporal and spatial resolutions are the major limitations in linking these models. Therefore few studies have focused on the design and operation of urban energy infrastructure in terms of climate resilience. Considering the occurrence of extreme climate events and increasing demand for implementing climate adaptation strategies the study highlights the importance of improving energy system models to consider future climate variations including extreme events to identify climate resilient energy transition pathways.
Recent Progress in Ammonia Fuel Cells and their Potential Applications
Nov 2020
Publication
Conventional technologies are largely powered by fossil fuel exploitation and have ultimately led to extensive environmental concerns. Hydrogen is an excellent carbon-free energy carrier but its storage and long-distance transportation remain big challenges. Ammonia however is a promising indirect hydrogen storage medium that has well-established storage and transportation links to make it an accessible fuel source. Moreover the notion of ‘green ammonia’ synthesised from renewable energy sources is an emerging topic that may open significant markets and provide a pathway to decarbonise a variety of applications reliant on fossil fuels. Herein a comparative study based on the chosen design working principles advantages and disadvantages of direct ammonia fuel cells is summarised. This work aims to review the most recent advances in ammonia fuel cells and demonstrates how close this technology type is to integration with future applications. At present several challenges such as material selection NOx formation CO2 tolerance limited power densities and long term stability must still be overcome and are also addressed within the contents of this review.
Electric and Hydrogen Buses: Shifting from Conventionally Fuelled Cars in the UK
May 2020
Publication
For the UK to meet their national target of net zero emissions as part of the central Paris Agreement target further emphasis needs to be placed on decarbonizing public transport and moving away from personal transport (conventionally fuelled vehicles (CFVs) and electric vehicles (EVs)). Electric buses (EBs) and hydrogen buses (HBs) have the potential to fulfil requirements if powered from low carbon renewable energy sources.
A comparison of carbon dioxide (CO2) emissions produced from conventionally fuelled buses (CFB) EBs and HBs between 2017 and 2050 under four National Grid electricity scenarios was conducted. In addition emissions per person at different vehicle capacity levels (100% 75% 50% and 25%) were projected for CFBs HBs EBs and personal transport assuming a maximum of 80 passengers per bus and four per personal vehicle.
Results indicated that CFVs produced 30 g CO2km−1 per person compared to 16.3 g CO2 km−1 per person by CFBs by 2050. At 100% capacity under the two-degree scenario CFB emissions were 36 times higher than EBs 9 times higher than HBs and 12 times higher than EVs in 2050. Cumulative emissions under all electricity scenarios remained lower for EBs and HBs.
Policy makers need to focus on encouraging a modal shift from personal transport towards sustainable public transport primarily EBs as the lowest level emitting vehicle type. Simple electrification of personal vehicles will not meet the required targets. Simultaneously CFBs need to be replaced with EBs and HBs if the UK is going to meet emission targets.
A comparison of carbon dioxide (CO2) emissions produced from conventionally fuelled buses (CFB) EBs and HBs between 2017 and 2050 under four National Grid electricity scenarios was conducted. In addition emissions per person at different vehicle capacity levels (100% 75% 50% and 25%) were projected for CFBs HBs EBs and personal transport assuming a maximum of 80 passengers per bus and four per personal vehicle.
Results indicated that CFVs produced 30 g CO2km−1 per person compared to 16.3 g CO2 km−1 per person by CFBs by 2050. At 100% capacity under the two-degree scenario CFB emissions were 36 times higher than EBs 9 times higher than HBs and 12 times higher than EVs in 2050. Cumulative emissions under all electricity scenarios remained lower for EBs and HBs.
Policy makers need to focus on encouraging a modal shift from personal transport towards sustainable public transport primarily EBs as the lowest level emitting vehicle type. Simple electrification of personal vehicles will not meet the required targets. Simultaneously CFBs need to be replaced with EBs and HBs if the UK is going to meet emission targets.
Electrocatalyst Derived from NiCu–MOF Arrays on Graphene Oxide Modified Carbon Cloth for Water Splitting
Apr 2022
Publication
Electrocatalysts are capable of transforming water into hydrogen oxygen and therefore into energy in an environmentally friendly and sustainable manner. However the limitations in the research of high performance catalysts act as an obstructer in the development of using water as green energy. Here we report on a delicate method to prepare novel bimetallic metal organic framework derived electrocatalysts (C–NiCu–BDC–GO–CC) using graphene oxide (GO) modified carbon cloth as a 3D flexible and conductive substrate. The resultant electrocatalyst C–NiCu–BDC– GO–CC exhibited very low electron transfer resistance which benefited from its extremely thin 3D sponge-like morphology. Furthermore it showed excellent oxygen evolution reaction (OER) activity achieving 10 mA/cm2 at a low overpotential of 390 mV in 1 M KOH electrolyte with a remarkable durability of 10 h.
Cautiously Optimistic: Understanding the Australian Public’s Response to the Hydrogen Opportunity
Sep 2019
Publication
The increased activity across the technical world for developing hydrogen has not gone unnoticed at the political level. However there remains a gap in understanding of how the general public will respond to the development of such an emergent industry. Recognising this gap we undertook ten focus groups (N=92) and a nationally representative online survey (N=2785) with the Australian public to better understand their response to hydrogen and the opportunities it presents for export and domestic use. In both focus groups and the national survey when Australians first heard the word hydrogen they were most likely to respond with a neutral response. For example in the survey 81% responded with words such as gas energy water; with only 13% giving negative associations (e.g. bomb explosion Hindenburg); and 3% positive (e.g. clean future). Males were more likely to be supportive of hydrogen than females. Those who answered more knowledge questions correctly were also more supportive. The main benefits associated with the use of hydrogen technologies centred around the environment - reduced greenhouse gas emissions and climate change mitigation potential were key benefits. With safety cost and environmental impacts - particularly concerns around pollution emissions and water use - being the most frequently cited concerns about the production and use of hydrogen. This presentation focuses on Australian attitudes to the developing hydrogen export opportunity and also for domestic use. Implications for industry and policy makers will be discussed in light of these Australians responses.
Sustainability Implications of Using Hydrogen as an Automotive Fuel in Western Australia
Jul 2020
Publication
Hydrogen is regarded as a potential solution to address future energy demands and environmental protection challenges. This study assesses the triple bottom line (TBL) sustainability performance of hydrogen as an automotive fuel for Western Australia (WA) using a life cycle approach. Hydrogen is considered to be produced through water electrolysis. Two scenarios current grid electricity and future renewable-based hydrogen were compared with gasoline as a base case. The results show that locally produced grid electricity-based hydrogen is good for local jobs but exhibits higher environmental impacts and negative economic benefits for consumers when compared to gasoline. After incorporating wind-generated electricity reductions of around 69% and 65% in global warming potential (GWP) and fossil fuel depletion (FFD) respectively were achieved compared to the base case gasoline. The land utilization for the production of hydrogen is not a problem as Western Australia has plenty of land to accommodate renewable energy projects. Water for hydrogen feedstock could be sourced through seawater desalination or from wastewater treatment plants in WA. Hydrogen also performed better than gasoline in terms of human health and conservation of fossil fuel indicators under the renewable energy scenario. Local job creation potential of hydrogen was estimated to be 1.29E-03 man-hours/VKT. It has also been found that the cost of hydrogen fuel cell vehicles (HFCV) needs to be similar to that of gasoline vehicles (GV) in order to be comparable with the gasoline life cycle cost per vehicle kilometre travel (VKT).
Supporting Hydrogen Development in Australia Short Film
Jan 2021
Publication
This short film promotes Geoscience Australia's online and publicly accessible hydrogen data products. The film steps through the functionality of GA's Australian Hydrogen Opportunities Tool (AusH2) and describes the upcoming Hydrogen Economic Fairways Tool which has been created through a collaborative effort with Monash University.
A Review on Synthesis of Methane as a Pathway for Renewable Energy Storage With a Focus on Solid Oxide Electrolytic Cell-Based Processes
Sep 2020
Publication
Environmental issues related to global warming are constantly pushing the fossil fuel-based energy sector toward an efficient and economically viable utilization of renewable energy. However challenges related to renewable energy call for alternative routes of its conversion to fuels and chemicals by an emerging Power-to-X approach. Methane is one such high-valued fuel that can be produced through renewables-powered electrolytic routes. Such routes employ alkaline electrolyzers proton exchange membrane electrolyzers and solid oxide electrolyzers commonly known as solid oxide electrolysis cells (SOECs). SOECs have the potential to utilize the waste heat generated from exothermic methanation reactions to reduce the expensive electrical energy input required for electrolysis. A further advantage of an SOEC lies in its capacity to co-electrolyze both steam and carbon dioxide as opposed to only water and this inherent capability of an SOEC can be harnessed for in situ synthesis of methane within a single reactor. However the concept of in situ methanation in SOECs is still at a nascent stage and requires significant advancements in SOEC materials particularly in developing a cathode electrocatalyst that demonstrates activity toward both steam electrolysis and methanation reactions. Equally important is the appropriate reactor design along with optimization of cell operating conditions (temperature pressure and applied potential). This review elucidates those developments along with research and development opportunities in this space. Also presented here is an efficiency comparison of different routes of synthetic methane production using SOECs in various modes that is as a source of hydrogen syngas and hydrogen/carbon dioxide mixture and for in situ methane synthesis.
Hydrogen in the Gas Distribution Networks: A Kickstart Project as an Input into the Development of a National Hydrogen Strategy for Australia
Nov 2019
Publication
The report investigates a kickstart project that allows up to 10% hydrogen into gas distribution networks. It reviews the technical impacts and standards to identify barriers and develop recommendations.
You can see the full report on the Australian Government website here
This report is developed in support of Australia's National Hydrogen Strategy
You can see the full report on the Australian Government website here
This report is developed in support of Australia's National Hydrogen Strategy
Magnesium Based Materials for Hydrogen Based Energy Storage: Past, Present and Future
Jan 2019
Publication
Volodymyr A. Yartys,
Mykhaylo V. Lototskyy,
Etsuo Akiba,
Rene Albert,
V. E. Antonov,
Jose-Ramón Ares,
Marcello Baricco,
Natacha Bourgeois,
Craig Buckley,
José Bellosta von Colbe,
Jean-Claude Crivello,
Fermin Cuevas,
Roman V. Denys,
Martin Dornheim,
Michael Felderhoff,
David M. Grant,
Bjørn Christian Hauback,
Terry D. Humphries,
Isaac Jacob,
Petra E. de Jongh,
Jean-Marc Joubert,
Mikhail A. Kuzovnikov,
Michel Latroche,
Mark Paskevicius,
Luca Pasquini,
L. Popilevsky,
Vladimir M. Skripnyuk,
Eugene I. Rabkin,
M. Veronica Sofianos,
Alastair D. Stuart,
Gavin Walker,
Hui Wang,
Colin Webb,
Min Zhu and
Torben R. Jensen
Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The “Magnesium group” of international experts contributing to IEA Task 32 “Hydrogen Based Energy Storage” recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article not only overviews the latest activities on both fundamental aspects of Mg-based hydrides and their applications but also presents a historic overview on the topic and outlines projected future developments. Particular attention is paid to the theoretical and experimental studies of Mg-H system at extreme pressures kinetics and thermodynamics of the systems based on MgH2 nanostructuring new Mg-based compounds and novel composites and catalysis in the Mg based H storage systems. Finally thermal energy storage and upscaled H storage systems accommodating MgH2 are presented.
Renewable Hydrogen for the Chemical Industry
Aug 2020
Publication
Hydrogen is often touted as the fuel of the future but hydrogen is already an important feedstock for the chemical industry. This review highlights current means for hydrogen production and use and the importance of progressing R&D along key technologies and policies to drive a cost reduction in renewable hydrogen production and enable the transition of chemical manufacturing toward green hydrogen as a feedstock and fuel. The chemical industry is at the core of what is considered a modern economy. It provides commodities and important materials e.g. fertilizers synthetic textiles and drug precursors supporting economies and more broadly our needs. The chemical sector is to become the major driver for oil production by 2030 as it entirely relies on sufficient oil supply. In this respect renewable hydrogen has an important role to play beyond its use in the transport sector. Hydrogen not only has three times the energy density of natural gas and using hydrogen as a fuel could help decarbonize the entire chemical manufacturing but also the use of green hydrogen as an essential reactant at the basis of many chemical products could facilitate the convergence toward virtuous circles. Enabling the production of green hydrogen at cost could not only enable new opportunities but also strengthen economies through a localized production and use of hydrogen. Herein existing technologies for the production of renewable hydrogen including biomass and water electrolysis and methods for the effective storage of hydrogen are reviewed with an emphasis on the need for mitigation strategies to enable such a transition.
Tantalum (Oxy)Nitride: Narrow Bandgap Photocatalysts for Solar Hydrogen Generation
Jul 2017
Publication
Photocatalytic water splitting which directly converts solar energy into hydrogen is one of the most desirable solar-energy-conversion approaches. The ultimate target of photocatalysis is to explore efficient and stable photocatalysts for solar water splitting. Tantalum (oxy)nitride-based materials are a class of the most promising photocatalysts for solar water splitting because of their narrow bandgaps and sufficient band energy potentials for water splitting. Tantalum (oxy)nitride-based photocatalysts have experienced intensive exploration and encouraging progress has been achieved over the past years. However the solar-to-hydrogen (STH) conversion efficiency is still very far from its theoretical value. The question of how to better design these materials in order to further improve their water-splitting capability is of interest and importance. This review summarizes the development of tantalum (oxy)nitride-based photocatalysts for solar water spitting. Special interest is paid to important strategies for improving photocatalytic water-splitting efficiency. This paper also proposes future trends to explore in the research area of tantalum-based narrow bandgap photocatalysts for solar water splitting.
Prospective Hydrogen Production Regions of Australia
Oct 2019
Publication
There is significant interest in Australia both federally and at the state level to develop a hydrogen production industry. Australia’s Chief Scientist Alan Finkel recently prepared a briefing paper for the COAG Energy Council outlining a road map for hydrogen. It identifies hydrogen has the potential to be a significant source of export revenue for Australia in future years assist with decarbonising Australia’s economy and could establish Australia as a leader in low emission fuel production.
As part of the ongoing investigations into the hydrogen production potential of Australia Geoscience Australia has been commissioned by the Department of Industry Innovation and Science to develop heat maps that show areas with high potential for future hydrogen production. The study is technology agnostic in that it considers hydrogen production via electrolysis using renewable energy sources and also fossil fuel hydrogen coupled with carbon capture and storage (CCS). The heat maps presented in this work are synthesized from the key individual national-scale datasets that are relevant for hydrogen production. In the case of hydrogen from electrolysis renewable energy potential and the availability of water are the most important factors with various infrastructural considerations playing a secondary role. In the case of fossil fuel hydrogen proximity to gas and coal resources water and availability of carbon storage sites are the important parameters that control the heat maps. In this report we present 5 different heat map scenarios reflecting different assumptions in the geospatial analysis and also reflecting to some degree the different projected timeframes for hydrogen production. The first three scenarios pertain to renewable energy and hydrogen There is significant interest in Australia both federally and at the state level to develop a hydrogen production industry. In August 2018 Australia’s Chief Scientist Dr Alan Finkel prepared a briefing paper for the COAG Energy Council outlining a road map for hydrogen. It identifies hydrogen has the potential to be a significant source of export revenue for Australia in future years assist with decarbonising Australia’s economy and could establish Australia as a leader in low emission fuel production.
As part of ongoing investigations into the hydrogen production potential of Australia Geoscience Australia has been engaged by the Department of Industry Innovation and Science to develop maps that show areas with high potential for future hydrogen production. The study is technology agnostic but considers only low carbon production processes. It includes hydrogen production via electrolysis using renewable energy sources (referred to as renewable hydrogen) as well as fossil fuel-derived hydrogen coupled with carbon capture and storage (CCS) (referred to as CCS hydrogen). The maps presented in this work are synthesized from the key individual national-scale datasets that are relevant for hydrogen production. In the case of hydrogen from electrolysis renewable energy potential (from wind solar and hydro resources) and the availability of water are the most important factors while various infrastructure considerations also play a role. In the case of CCS hydrogen proximity to gas and coal resources water and availability of carbon storage sites are the important parameters that control the spatial distribution of potential hydrogen production. In this report we present five different scenarios that reflect key differences in technologies for hydrogen production and the requirements of those technologies. Using geospatial analysis each scenario is translated into a heat map that shows regional trends in potential for hydrogen production based on access to underpinning resources and existing infrastructure.
Three scenarios explore the future potential for renewable hydrogen produced by electrolysis. These demonstrate a high potential for hydrogen production in the future near many Australian coastal areas which is even larger if infrastructure is available to transport renewable power generated from inland areas to the coast. Results also show significant future potential for hydrogen production in inland areas where water is available. The final two scenarios focus on the future potential for CCS hydrogen: a 2030 scenario and a 2050 scenario. A key factor in future CCS hydrogen potential is related to the timeframes for the availability of geological storage resources for CO2.
As part of the ongoing investigations into the hydrogen production potential of Australia Geoscience Australia has been commissioned by the Department of Industry Innovation and Science to develop heat maps that show areas with high potential for future hydrogen production. The study is technology agnostic in that it considers hydrogen production via electrolysis using renewable energy sources and also fossil fuel hydrogen coupled with carbon capture and storage (CCS). The heat maps presented in this work are synthesized from the key individual national-scale datasets that are relevant for hydrogen production. In the case of hydrogen from electrolysis renewable energy potential and the availability of water are the most important factors with various infrastructural considerations playing a secondary role. In the case of fossil fuel hydrogen proximity to gas and coal resources water and availability of carbon storage sites are the important parameters that control the heat maps. In this report we present 5 different heat map scenarios reflecting different assumptions in the geospatial analysis and also reflecting to some degree the different projected timeframes for hydrogen production. The first three scenarios pertain to renewable energy and hydrogen There is significant interest in Australia both federally and at the state level to develop a hydrogen production industry. In August 2018 Australia’s Chief Scientist Dr Alan Finkel prepared a briefing paper for the COAG Energy Council outlining a road map for hydrogen. It identifies hydrogen has the potential to be a significant source of export revenue for Australia in future years assist with decarbonising Australia’s economy and could establish Australia as a leader in low emission fuel production.
As part of ongoing investigations into the hydrogen production potential of Australia Geoscience Australia has been engaged by the Department of Industry Innovation and Science to develop maps that show areas with high potential for future hydrogen production. The study is technology agnostic but considers only low carbon production processes. It includes hydrogen production via electrolysis using renewable energy sources (referred to as renewable hydrogen) as well as fossil fuel-derived hydrogen coupled with carbon capture and storage (CCS) (referred to as CCS hydrogen). The maps presented in this work are synthesized from the key individual national-scale datasets that are relevant for hydrogen production. In the case of hydrogen from electrolysis renewable energy potential (from wind solar and hydro resources) and the availability of water are the most important factors while various infrastructure considerations also play a role. In the case of CCS hydrogen proximity to gas and coal resources water and availability of carbon storage sites are the important parameters that control the spatial distribution of potential hydrogen production. In this report we present five different scenarios that reflect key differences in technologies for hydrogen production and the requirements of those technologies. Using geospatial analysis each scenario is translated into a heat map that shows regional trends in potential for hydrogen production based on access to underpinning resources and existing infrastructure.
Three scenarios explore the future potential for renewable hydrogen produced by electrolysis. These demonstrate a high potential for hydrogen production in the future near many Australian coastal areas which is even larger if infrastructure is available to transport renewable power generated from inland areas to the coast. Results also show significant future potential for hydrogen production in inland areas where water is available. The final two scenarios focus on the future potential for CCS hydrogen: a 2030 scenario and a 2050 scenario. A key factor in future CCS hydrogen potential is related to the timeframes for the availability of geological storage resources for CO2.
Technology Investment Roadmap- Global Leadership in Low Emissions Technologies
Sep 2020
Publication
Australia’s Technology Investment Roadmap is a strategy to accelerate development and commercialisation of low emissions technologies.
Annual low emissions statements are key milestones of the roadmap process. These statements prioritise low emissions technologies with potential to deliver the strongest economic and emissions reduction outcomes for Australia. They focus government investment on new and emerging technologies.
In this Statement
The first Low Emissions Technology Statement presents a vision of a prosperous Australia recognised as a global low emissions technology leader.
Annual low emissions statements are key milestones of the roadmap process. These statements prioritise low emissions technologies with potential to deliver the strongest economic and emissions reduction outcomes for Australia. They focus government investment on new and emerging technologies.
In this Statement
The first Low Emissions Technology Statement presents a vision of a prosperous Australia recognised as a global low emissions technology leader.
- priority technologies and economic stretch goals
- Australia’s big technology challenges and opportunities
- Technology Investment Framework
- monitoring transparency and impact evaluation
No more items...