United Kingdom
Living Carbon Free – Exploring What a Net-zero Target Means for Households
Jun 2019
Publication
The Energy Systems Catapult (ESC) explored the role of households in a net-zero emissions society to accompany the CCC’s Net Zero report looking at opportunities and challenges for households to reduce emissions from today’s levels and to support the stretch from an 80% emissions reduction to a net-zero greenhouse gas target. As well as describing a net-zero emissions world for households of different types the ESC looked at average household emissions under different decarbonisation scenarios and the options households can take to contribute to the decarbonisation effort.
This supported the Net Zero Technical report.
This supported the Net Zero Technical report.
Performance Evaluation of Empirical Models for Vented Lean Hydrogen Explosions
Sep 2017
Publication
Explosion venting is a method commonly used to prevent or minimize damage to an enclosure caused by an accidental explosion. An estimate of the maximum overpressure generated though explosion is an important parameter in the design of the vents. Various engineering models (Bauwens et al. 2012 Molkov and Bragin 2015) and European (EN 14994 ) and USA standards (NFPA 68) are available to predict such overpressure. In this study their performance is evaluated using a number of published experiments. Comparison of pressure predictions from various models have also been carried out for the recent experiments conducted by GexCon using a 20 feet ISO container. The results show that the model of Bauwens et al. (2012) predicts well for hydrogen concentration between 16% and 21% and in the presence of obstacles. The model of Molkov et al. (2015) is found to work well for hydrogen concentrations between 10% and 30% without obstacles. In the presence of obstacles as no guidelines are given to set the coefficient for obstacles in the model it was necessary to tune the coefficient to match the experimental data. The predictions of the formulas in NFPA 68 show a large scatter across different tests. The current version of both EN 14994 and NFPA 68 are found to have very limited range of applicability and can hardly be used for vent sizing of hydrogen-air deflagrations. Overall the accuracy of all the engineering models was found to be limited. Some recommendations concerning their applicability will be given for vented lean-hydrogen explosion concentrations of interest to practical applications.
The Pathway to Net Zero Heating in the UK: A UKERC Policy Brief
Oct 2020
Publication
There is uncertainty over how heating might practically be decarbonised in the future. This briefing provides some clarity about the possible pathways forward focusing on the next 5-10 years.<br/>Meeting the UK government’s net zero emissions goal for 2050 will only be possible by complete decarbonisation of the building stock (both existing and new). There is uncertainty over the extent to which heating might practically be decarbonised in the future and what the optimal technologies may be. This paper provides some clarity about the pathways forward focusing on the next 5-10 years.
Energy Innovation Needs Assessment: Road Transport
Nov 2019
Publication
The Energy Innovation Needs Assessment (EINA) aims to identify the key innovation needs across the UK’s energy system to inform the prioritisation of public sector investment in low-carbon innovation. Using an analytical methodology developed by the Department for Business Energy & Industrial Strategy (BEIS) the EINA takes a system level approach and values innovations in a technology in terms of the system-level benefits a technology innovation provides. This whole system modelling in line with BEIS’s EINA methodology was delivered by the Energy Systems Catapult (ESC) using the Energy System Modelling Environment (ESMETM) as the primary modelling tool.
To support the overall prioritisation of innovation activity the EINA process analyses key technologies in more detail. These technologies are grouped together into sub-themes according to the primary role they fulfil in the energy system. For key technologies within a sub-theme innovations and business opportunities are identified. The main findings at the technology level are summarised in sub-theme reports. An overview report will combine the findings from each sub-theme to provide a broad system-level perspective and prioritisation.
This EINA analysis is based on a combination of desk research by a consortium of economic and engineering consultants and stakeholder engagement. The prioritisation of innovation and business opportunities presented is informed by a workshop organised for each sub-theme assembling key stakeholders from the academic community industry and government.
This report was commissioned prior to advice being received from the CCC on meeting a net zero target and reflects priorities to meet the previous 80% target in 2050. The newly legislated net zero target is not expected to change the set of innovation priorities rather it will make them all more valuable overall. Further work is required to assess detailed implications.
To support the overall prioritisation of innovation activity the EINA process analyses key technologies in more detail. These technologies are grouped together into sub-themes according to the primary role they fulfil in the energy system. For key technologies within a sub-theme innovations and business opportunities are identified. The main findings at the technology level are summarised in sub-theme reports. An overview report will combine the findings from each sub-theme to provide a broad system-level perspective and prioritisation.
This EINA analysis is based on a combination of desk research by a consortium of economic and engineering consultants and stakeholder engagement. The prioritisation of innovation and business opportunities presented is informed by a workshop organised for each sub-theme assembling key stakeholders from the academic community industry and government.
This report was commissioned prior to advice being received from the CCC on meeting a net zero target and reflects priorities to meet the previous 80% target in 2050. The newly legislated net zero target is not expected to change the set of innovation priorities rather it will make them all more valuable overall. Further work is required to assess detailed implications.
Accelerating to Net Zero with Hydrogen Blending Standards Development in the UK, Canada and the US - Part 1
Mar 2021
Publication
"Hydrogen is expected to play a critical role in the move to a net-zero economy. However large-scale deployment is still in its infancy and there is still much to be done before we can blend hydrogen in large volumes into gas networks and ramp up the production that is required to meet demands of the energy transport and industry sectors. KTN Global Alliance will host two webinars to explore these challenges and opportunities in hydrogen blending on the 2nd and 3rd March 2021.
Exciting pilot projects are being conducted and explored in the UK Canada and US states such as California to determine the technical feasibility of blending hydrogen into existing natural gas systems. Whilst the deployment of hydrogen is in its early stages there is increasing interest around permitting significant percentage blends of hydrogen into gas networks which would enable the carbon intensity of gas supplies to be reduced creating a new demand for hydrogen and with the use of separation and purification technologies downstream support the transportation of pure hydrogen to markets.
Gaps in codes and standards need to be addressed to enable adoption and there may be opportunities for international collaboration and harmonisation to ensure that best practices are shared globally and to facilitate the growth of trade and export markets. There is an opportunity for the UK Canada and US three G7 countries to work together and show market making leadership in key enabling regulation for the new hydrogen economy.
Delivered by KTN Global Alliance on behalf of the British Consulate-General in Vancouver and the UK Science and Innovation Network in Canada and the US these two webinars will showcase hydrogen blending pilot projects in the UK Canada and California highlighting challenges and opportunities with regard to standards development for hydrogen blending and supporting further transatlantic collaboration in this area. The events also form part of the UK’s international engagement to build momentum towards a successful outcome at COP26 the UN climate summit that the UK will host in Glasgow in November 2021. The webinars will bring together experts from industry academia and policy from the UK Canada and California. Attendees will have an opportunity to ask questions and interact using Mentimeter."
Part 2 Highlights and Perspectives from Canada and California can be found here.
Exciting pilot projects are being conducted and explored in the UK Canada and US states such as California to determine the technical feasibility of blending hydrogen into existing natural gas systems. Whilst the deployment of hydrogen is in its early stages there is increasing interest around permitting significant percentage blends of hydrogen into gas networks which would enable the carbon intensity of gas supplies to be reduced creating a new demand for hydrogen and with the use of separation and purification technologies downstream support the transportation of pure hydrogen to markets.
Gaps in codes and standards need to be addressed to enable adoption and there may be opportunities for international collaboration and harmonisation to ensure that best practices are shared globally and to facilitate the growth of trade and export markets. There is an opportunity for the UK Canada and US three G7 countries to work together and show market making leadership in key enabling regulation for the new hydrogen economy.
Delivered by KTN Global Alliance on behalf of the British Consulate-General in Vancouver and the UK Science and Innovation Network in Canada and the US these two webinars will showcase hydrogen blending pilot projects in the UK Canada and California highlighting challenges and opportunities with regard to standards development for hydrogen blending and supporting further transatlantic collaboration in this area. The events also form part of the UK’s international engagement to build momentum towards a successful outcome at COP26 the UN climate summit that the UK will host in Glasgow in November 2021. The webinars will bring together experts from industry academia and policy from the UK Canada and California. Attendees will have an opportunity to ask questions and interact using Mentimeter."
Part 2 Highlights and Perspectives from Canada and California can be found here.
Secure, Affordable, Low Carbon: Gas in our Future Energy System
Feb 2020
Publication
Our gas network is one of the best developed in the world providing safe secure affordable energy to homes and businesses across the UK.<br/><br/>To meet the biggest energy challenge of our generation – making deep cuts to carbon emissions by 2050 – it needs to embrace new technology which builds on these strengths and delivers the integrated flexible network of the future. This briefing sets out how it is already doing that. Take a look at our Gas Futures Messages booklet attached.
HyDeploy Report: Gas Characteristics (Leakage, Dispersion and Flammability)
Sep 2018
Publication
The Health and Safety Laboratory (HSL) has carried out an investigation into the gas characteristics that may influence the leakage dispersion and flammability hazards associated with blended natural gas-hydrogen mixtures containing up to 20 % mol/mol hydrogen. The work was carried out under contract to Cadent & Northern Gas Networks as part of the HyDeploy project which was commissioned to investigate the feasibility of using blended hydrogen-natural gas mixtures in UK mains gas distribution networks.
Under the HyDeploy project a demonstration scheme is being carried out at Keele University in which it is planned to inject up to 20 % mol/mol hydrogen. Keele is Britain’s largest campus university and an ideal test site for a demonstration scheme as its gas distribution network is largely independent of the national gas network but still subject to UK gas industry procedural controls. It is anticipated that a successful demonstration scheme will facilitate the use of blended natural gas-hydrogen mixtures throughout the UK leading to significant reductions in carbon dioxide emissions. The project is being led by Cadent & Northern Gas Networks and also involves ITM Power Progressive Energy Keele University and HSL in consortium.
Click the supplements tab to view the other documents in this report
Under the HyDeploy project a demonstration scheme is being carried out at Keele University in which it is planned to inject up to 20 % mol/mol hydrogen. Keele is Britain’s largest campus university and an ideal test site for a demonstration scheme as its gas distribution network is largely independent of the national gas network but still subject to UK gas industry procedural controls. It is anticipated that a successful demonstration scheme will facilitate the use of blended natural gas-hydrogen mixtures throughout the UK leading to significant reductions in carbon dioxide emissions. The project is being led by Cadent & Northern Gas Networks and also involves ITM Power Progressive Energy Keele University and HSL in consortium.
Click the supplements tab to view the other documents in this report
Sustainable Hydrogen Production: A Role for Fusion
Apr 2007
Publication
This Meeting Report summarises the findings of a two-day workshop in April 2007 at the Culham Science Centre and Worcester College Oxford which explored the potential for large-scale Hydrogen production through methods other than electrolysis.<br/>Operating at the cusp of research and policy-making the UK Energy Research Centre's mission is to be the UK's pre-eminent centre of research and source of authoritative information and leadership on sustainable energy systems. The Centre takes a whole systems approach to energy research incorporating economics engineering and the physical environmental and social sciences while developing and maintaining the means to enable cohesive research in energy. A key supporting function of UKERC is the Meeting Place based in Oxford which aims to bring together members of the UK energy community and overseas experts from different disciplines to learn identify problems develop solutions and further the energy debate.
What is Needed to Deliver Carbon-neutral Heat Using Hydrogen and CCS?
Sep 2020
Publication
In comparison with the power sector large scale decarbonisation of heat has received relatively little attention at the infrastructural scale despite its importance in the global CO2 emissions landscape. In this study we focus on the regional transition of a heating sector from natural gas-based infrastructure to H2 using mathematical optimisation. A discrete spatio-temporal description of the geographical region of Great Britain was used in addition to a detailed description of all network elements for illustrating the key factors in the design of nation-wide H2 and CO2 infrastructure. We have found that the synergistic deployment of H2 production technologies such as autothermal reforming of methane and biomass gasification with CO2 abatement technologies such as carbon capture and storage (CCS) are critical in achieving cost-effective decarbonisation. We show that both large scale underground H2 storage and water electrolysis provide resilience and flexibility to the heating system competing on cost and deployment rates. The optimal regions for siting H2 production infrastructure are characterised by proximity to: (1) underground H2 storage (2) high demands for H2 (3) geological storage for CO2. Furthermore cost-effective transitions based on a methane reforming pathway may necessitate regional expansions in the supply of natural gas with profound implications for security of supply in nations that are already highly reliant potentially creating an infrastructure lock-in during the near term. We found that the total system cost comprising both investment and operational elements is mostly influenced by the natural gas price followed by biomass price and CapEx of underground caverns. Under a hybrid Regulated Asset Base (RAB) commercial framework with private enterprises delivering production infrastructure the total cost of heat supply over the infrastructure lifetime is estimated as 5.2–8.6 pence per kW h. Due to the higher cost relative to natural gas a Contract for Difference payment between d20 per MW h and d53 per MW h will be necessary for H2-derived heat to be competitive in the market.
Hydrogen Production from Natural Gas and Biomethane with Carbon Capture and Storage – A Techno-environmental Analysis
Mar 2020
Publication
This study presents an integrated techno-environmental assessment of hydrogen production from natural gas and biomethane combined with CO2 capture and storage (CCS). We have included steam methane reforming (SMR) and autothermal reforming (ATR) for syngas production. CO2 is captured from the syngas with a novel vacuum pressure swing adsorption (VPSA) process that combines hydrogen purification and CO2 separation in one cycle. As comparison we have included cases with conventional amine-based technology. We have extended standard attributional Life Cycle Assessment (LCA) following ISO standards with a detailed carbon balance of the biogas production process (via digestion) and its by-products. The results show that the life-cycle greenhouse gas (GHG) performance of the VPSA and amine-based CO2 capture technologies is very similar as a result of comparable energy consumption. The configuration with the highest plant-wide CO2 capture rate (almost 100% of produced CO2 captured) is autothermal reforming with a two-stage water-gas shift and VPSA CO2 capture – because the latter has an inherently high CO2 capture rate of 98% or more for the investigated syngas. Depending on the configuration the addition of CCS to natural gas reforming-based hydrogen production reduces its life-cycle Global Warming Potential by 45–85 percent while the other environmental life-cycle impacts slightly increase. This brings natural gas-based hydrogen on par with renewable electricity-based hydrogen regarding impacts on climate change. When biomethane is used instead of natural gas our study shows potential for net negative greenhouse gas emissions i.e. the net removal of CO2 over the life cycle of biowaste-based hydrogen production. In the special case where the biogas digestate is used as agricultural fertiliser and where a substantial amount of the carbon in the digestate remains in the soil the biowaste-based hydrogen reaches net-negative life cycle greenhouse gas emissions even without the application of CCS. Addition of CCS to biomethane-based hydrogen production leads to net-negative emissions in all investigated cases.
The Ten Point Plan for a Green Industrial Revolution: Building Back Better, Supporting Green Jobs, and Accelerating Our Path to Net Zero
Nov 2020
Publication
As the world looks to recover from the impact of coronavirus on our lives livelihoods and economies we have the chance to build back better: to invest in making the UK a global leader in green technologies.
The plan focuses on increasing ambition in the following areas:
The plan focuses on increasing ambition in the following areas:
- advancing offshore wind
- driving the growth of low carbon hydrogen
- delivering new and advanced nuclear power
- accelerating the shift to zero emission vehicles
- green public transport cycling and walking
- ‘jet zero’ and green ships
- greener buildings
- investing in carbon capture usage and storage
- protecting our natural environment
- green finance and innovation
World Energy Issues Monitor 2021: Humanising Energy
Mar 2021
Publication
Based on data collection carried out between October and December 2020 and the testing of emerging findings with the Council’s regional communities during a series of digital workshops held during February 2021 the report has shown
- Energy leaders’ perceptions of areas of risk opportunity and priorities for action have radically changed over the last 12 months. While economic turbulence stemming from the ongoing reverberations of COVID-19 is the biggest area of uncertainty with uncertainty around economic trends increasing by a third over the previous year there is also a growing focus on the social agenda associated with a faster paced energy transition.
- There is an increased awareness of the societal and human impact of both recovery and the wider energy transition. The issue of energy affordability has rapidly risen up the industry’s priority list with its impact and uncertainty perceived 20% larger than a year ago. Energy affordability affects society across all geographies ranging from city dwellers in developed countries to the rural poor in developing ones.
- The emergence of a new generation of digital energy services and energy entrepreneurs. Increasingly agile disruptive technologies have taken advantage of the social upheaval to gain market share at the expense of supply-centric energy solutions. There is a growing focus on customer-centric demand-driven solutions and fast changing patterns of global and local demand.
The Influence of Refractory Metals on the Hydrogen Storage Characteristics of FeTi-based Alloys Prepared by Suspended Droplet Alloying
Jun 2020
Publication
The influence of the addition of refractory metals (molybdenum and tantalum) on the hydrogenation properties of FeTi intermetallic phase-based alloys was investigated. The suspended droplet alloying technique was applied to fabricate FeTiTa-based and FeTiMo-based alloys. The phase composition and hydrogen storage properties of the samples were investigated. The samples modified with the refractory metals exhibited lower plateau pressures and lower hydrogen storage capacities than those of the FeTi reference sample due to solid solution formation. It was observed that the equilibrium pressures decreased with the amount of molybdenum which is in good agreement with the increase in the cell parameters of the TiFe phase. Suspended droplet alloying was found to be a practical method to fabricate alloys with refractory metal additions; however it is appropriate for screening samples with desired chemical and phase compositions rather than for manufacturing purposes.
Future Cost and Performance of Water Electrolysis: An Expert Elicitation Study
Nov 2017
Publication
The need for energy storage to balance intermittent and inflexible electricity supply with demand is driving interest in conversion of renewable electricity via electrolysis into a storable gas. But high capital cost and uncertainty regarding future cost and performance improvements are barriers to investment in water electrolysis. Expert elicitations can support decision-making when data are sparse and their future development uncertain. Therefore this study presents expert views on future capital cost lifetime and efficiency for three electrolysis technologies: alkaline (AEC) proton exchange membrane (PEMEC) and solid oxide electrolysis cell (SOEC). Experts estimate that increased R&D funding can reduce capital costs by 0–24% while production scale-up alone has an impact of 17–30%. System lifetimes may converge at around 60000–90000 h and efficiency improvements will be negligible. In addition to innovations on the cell-level experts highlight improved production methods to automate manufacturing and produce higher quality components. Research into SOECs with lower electrode polarisation resistance or zero-gap AECs could undermine the projected dominance of PEMEC systems. This study thereby reduces barriers to investment in water electrolysis and shows how expert elicitations can help guide near-term investment policy and research efforts to support the development of electrolysis for low-carbon energy systems.
Transport Energy Air Pollution Model
May 2019
Publication
The transport sector remains at the centre of any debates around energy conservation exaggerated by the stubborn and overwhelming reliance on fossil fuels by its motorised forms whether passenger and freight road rail sea and air.<br/>The very slow transition to alternative fuel sources to date has resulted in this sector being increasingly and convincingly held responsible for the likely failure of individual countries including the UK to meet their obligations under consecutive international climate change agreements.<br/>Electrification of transport is largely expected to take us down the path to a ‘zero carbon future’ (CCC 2019; DfT 2018). But there are serious concerns about future technology performance availability costs and uptake by consumers and businesses. There are also concerns about the increasing gap between lab and ‘real world’ performance of energy use carbon and air pollution emissions. Recently the role of consumer ‘lifestyles’ has increased in prominence (e.g. IPCC 2018) but as yet has not been taken seriously by the DfT BEIS or even the CCC (2019).
Potential Economic Impacts of the HyNet North West Project
Jan 2018
Publication
The objective of the analysis is to provide a robust assessment of the economic impact of HyNet NW over the period to 2050 across both the North West of England and the UK as a whole. Impact is assessed through modelling of direct indirect and induced effect frameworks:
Consideration is also given to the potential impacts of inward investment attracted to the North West/UK in the wake of the Project.
- Direct effects – activities that directly accrue due to the construction and operation of the facilities;
- Indirect effects – the purchase of goods and services to facilitate construction/operation; and
- Induced effects – spending of wages and salaries generated directly and indirectly through construction and operation.
Consideration is also given to the potential impacts of inward investment attracted to the North West/UK in the wake of the Project.
Cryogenic Hydrogen Jets: Flammable Envelope Size and Hazard Distances for Jet Fire
Sep 2019
Publication
Engineering tools for calculation of hazard distances for cryogenic hydrogen jets are currently missing. This study aims at the development of validated correlations for calculation of hazard distances for cryogenic unignited releases and jet fires. The experiments performed by Sandia National Laboratories (SNL) on jets from storage temperature in the range 46-295 K and pressure up to 6 bar abs are used to expand the validation domain of the correlations. The Ulster’s under-expanded jet theory is applied to calculate parameters at the real nozzle exit. The similarity law for concentration decay in momentum-dominated jets is shown to be capable to reproduce experimental data of SNL on 9 unignited cryogenic releases. The accuracy of the similarity law to predict experimentally measured axial concentration decay improves with the increase of the release diameter. This is thought due to decrease of the effect of friction and minor losses for large release orifices. The dimensionless flame length correlation is applied to analyse 30 cryogenic jet fire tests. The deviation of calculated flame length from measured in experiments is mostly within acceptable accuracy for engineering correlations 20% similarly to releases from storage and equipment at atmospheric temperatures. It is concluded that the similarity law and the dimensionless flame correlation can be used as universal engineering tools for calculation of hazard distances for hydrogen releases at any storage temperature including cryogenic.
Accumulation of Hydrogen Released into a Vented Enclosure - Experimental Results
Sep 2013
Publication
This paper reports experimental results from a series of experiments in which gaseous hydrogen was released into a 31 m3 enclosure and the hydrogen concentrations at a number of points within the enclosure were monitored to assess whether hydrogen accumulation occurred and whether a homogeneous or stratified mixture was formed. The enclosure was located in the open air and therefore subject to realistic and therefore variable wind conditions. The hydrogen release rate and the passive vent arrangements were varied. The experiments were carried out as part of the EU Hyindoor Project.
Oxford Energy Podcast – The Role of Ammonia and Hydrogen in Meeting International Maritime Organisation Targets for Decarbonising Shipping
Jul 2021
Publication
The world’s shipping fleet is responsible for approximately 0.9 Gt of CO2 emissions annually around 2.9 per cent of the world’s man-made emissions. Under an IEA ‘business as usual’ scenario this is forecast to rise to almost 1.7 Gt per year by 2050. The industry’s principal regulatory body the International Maritime Organization (IMO) aims to reduce world shipping’s greenhouse gas emissions in line with the 2015 Paris Agreement targeting a 50 per cent reduction compared with 2008 levels by 2050. The cost of achieving these emission targets however is about $1 trillion and will require focus from regulators operators and end consumers who in the end will have to pay. In this podcast David Ledesma talks to Bruce Moore Howe Robinson Partners to discuss these issues and ask in such a fragmented industry what the immediate priorities for the marine sector must be and how can it bring about a mix of commercial incentives and regulatory change that result in tangible emissions reductions.
The podcast can be found on their website
The podcast can be found on their website
Modifications in the Composition of CuO/ZnO/Al2O3 Catalyst for the Synthesis of Methanol by CO2 Hydrogenation
Jun 2021
Publication
Renewable methanol obtained from CO2 and hydrogen provided from renewable energy was proposed to close the CO2 loop. In industry methanol synthesis using the catalyst CuO/ZnO/Al2O3 occurs at a high pressure. We intend to make certain modification on the traditional catalyst to work at lower pressure maintaining high selectivity. Therefore three heterogeneous catalysts were synthesized by coprecipitation to improve the activity and the selectivity to methanol under mild conditions of temperature and pressure. Certain modifications on the traditional catalyst Cu/Zn/Al2O3 were employed such as the modification of the synthesis time and the addition of Pd as a dopant agent. The most efficient catalyst among those tested was a palladium-doped catalyst 5% Pd/Cu/Zn/Al2O3. This had a selectivity of 64% at 210 °C and 5 bar.
Five Minute Guide to Hydrogen
Feb 2016
Publication
Hydrogen is an emerging energy vector many components of which are mature technologies. Current hydrogen technology is already able to provide advantages over other energy vectors and many of its challenges are being actively addressed by research and development.<br/><br/>Hydrogen can be derived stored and converted through various processes each of which represents different levels of carbon intensity efficiency and end use functionality. Our latest five minute guide looks at this energy vector in brief including public perception transportation and storage as well as using hydrogen as a solution.
Hy4Heat Safety Assessment: Precis - Work Package 7
May 2021
Publication
The Hy4Heat Safety Assessment has focused on assessing the safe use of hydrogen gas in certain types of domestic properties and buildings. The summary reports (the Precis and the Safety Assessment Conclusions Report) bring together all the findings of the work and should be looked to for context by all readers. The technical reports should be read in conjunction with the summary reports. While the summary reports are made as accessible as possible for general readers the technical reports may be most accessible for readers with a degree of technical subject matter understanding. All of the safety assessment reports have now been reviewed by the HSE.<br/><br/>This document is an overview of the Safety Assessment work undertaken as part of the Hy4Heat programme
Mobile Phone Infrastructure Development: Lessons for the Development of a Hydrogen Infrastructure
Apr 2014
Publication
The development of new infrastructure is often a consideration in the introduction of new innovations. Currently there is some confusion around how to develop a hydrogen infrastructure to support the introduction of FCVs. Lessons can be learned from similar technology introduction in the past and therefore this paper investigates how mobile phone infrastructure was developed allowing the mass-market penetration of mobile phones. Based on this successful infrastructural development suggestions can be made on the development of a hydrogen infrastructure. It is suggested that a hydrogen infrastructure needs to be pre-developed 3–5 years before the market introduction of FCVs can successfully occur. A lack of infrastructural pre-development will cause to the market introduction of FCVs to fail.
H21- Phase 1 Technical Summary Report
May 2021
Publication
The UK Government signed legislation on 27th June 2019 committing the UK to a legally binding target of Net Zero emissions by 2050. Climate change is one of the most significant technical economic social and business challenges facing the world today.
The H21 NIC Phase 1 project delivered an optimally designed experimentation and testing programme supported by the HSE Science Division and DNV GL with the aim to collect quantifiable evidence to support that the UK distribution network of 2032 will be comparably as safe operating on 100% hydrogen as it currently is on
natural gas. This innovative project begins to fill critical safety evidence gaps surrounding the conversion of the UK gas network to 100% hydrogen. This will facilitate progression towards H21 Phase 2 Operational Safety Demonstrations and the H21 Phase 3 Live Trials to promote customer acceptability and ultimately aid progress towards a government policy decision on heat.
DNV GL and HSE Science Division were engaged to undertake the experimentation testing and QRA update programme of work. DNV GL and HSE Science Division also peer reviewed each other’s programme of work at various stages throughout the project undertaking a challenge and review of the experimental data and results to provide confidence in the conclusions.
A strategic set of tests was designed to cover the range of assets represented across the Great Britain gas distribution networks. The assets used in the testing were mostly recovered from the distribution network as part of the ongoing Iron Mains Risk Reduction Replacement Programme. Controlled testing against a well-defined master testing plan with both natural gas and 100% hydrogen was then undertaken to provide the quantitative evidence to forecast any change to background leakage levels in a 100% hydrogen network.
Key Findings from Phase 1a:
The H21 NIC Phase 1 project delivered an optimally designed experimentation and testing programme supported by the HSE Science Division and DNV GL with the aim to collect quantifiable evidence to support that the UK distribution network of 2032 will be comparably as safe operating on 100% hydrogen as it currently is on
natural gas. This innovative project begins to fill critical safety evidence gaps surrounding the conversion of the UK gas network to 100% hydrogen. This will facilitate progression towards H21 Phase 2 Operational Safety Demonstrations and the H21 Phase 3 Live Trials to promote customer acceptability and ultimately aid progress towards a government policy decision on heat.
DNV GL and HSE Science Division were engaged to undertake the experimentation testing and QRA update programme of work. DNV GL and HSE Science Division also peer reviewed each other’s programme of work at various stages throughout the project undertaking a challenge and review of the experimental data and results to provide confidence in the conclusions.
A strategic set of tests was designed to cover the range of assets represented across the Great Britain gas distribution networks. The assets used in the testing were mostly recovered from the distribution network as part of the ongoing Iron Mains Risk Reduction Replacement Programme. Controlled testing against a well-defined master testing plan with both natural gas and 100% hydrogen was then undertaken to provide the quantitative evidence to forecast any change to background leakage levels in a 100% hydrogen network.
Key Findings from Phase 1a:
- Of the 215 assets tested 41 of them were found to leak 19 of them provided sufficient data to be able to compare hydrogen and methane leak rates.
- The tests showed that assets that were gas tight on methane were also gas tight on hydrogen. Assets that leaked on hydrogen also leaked
- on methane including repaired assets.
- The ratio of the hydrogen to methane volumetric leak rates varied between 1.1 and 2.2 which is largely consistent with the bounding values expected for laminar and turbulent (or inertial) flow which gave ratios of 1.2 and 2.8 respectively.
- None of the PE assets leaked; cast ductile and spun iron leaked to a similar degree (around 26-29% of all iron assets leaked) and the proportion of leaking steel assets was slightly less (14%).
- Four types of joint were responsible for most of the leaks on joints: screwed lead yarn bolted gland and hook bolts.
- All of the repairs that sealed methane leaks also were effective when tested with hydrogen.
A Comparative Review of Alternative Fuels for the Maritime Sector: Economic, Technology, and Policy Challenges for Clean Energy Implementation
Oct 2021
Publication
Global maritime transportation is responsible for around 3% of total anthropogenic green‐ house gas emissions and significant proportions of SOx NOx and PM emissions. Considering the predicted growth in shipping volumes to 2050 greenhouse gas emissions from ships must be cut by 75–85% per ton‐mile to meet Paris Agreement goals. This study reviews the potential of a range of alternative fuels for decarbonisation in maritime. A systematic literature review and information synthesis method was applied to evaluate fuel characteristics production pathways utilization technologies energy efficiency lifecycle environmental performance economic viability and cur‐ rent applicable policies. Alternative fuels are essential to decarbonisation in international shipping. However findings suggest there is no single route to deliver the required greenhouse gas emissions reductions. Emissions reductions vary widely depending on the production pathways of the fuel. Alternative fuels utilising a carbon‐intensive production pathway will not provide decarbonisation instead shifting emissions elsewhere in the supply chain. Ultimately a system‐wide perspective to creating an effective policy framework is required in order to promote the adoption of alternative propulsion technologies.
Hydrogen Implications for Gas Network Operators
Jan 2021
Publication
Europe has built up one of the best gas distribution infrastructures in the world. There’s one problem though. It distributes natural gas a fuel that we will hardly be able to use if we’re to reach our net zero targets. Can we use the infrastructure instead for clean hydrogen – either blended with natural gas as a stepping stone or with pure hydrogen in the future? In this episode we put aside discussion on the extent to which we should do this – and focus on whether or not we can do this and what’s involved in doing so.
Jon Slowe is joined by Eva Hennig Head of Department for EU Energy Policy at Thüga an alliance of German municipal energy companies (as well as chair of Eurogas’s distribution committee); Keith Owen Head of Systems Development and Energy Strategy at Northern Gas Networks in the UK; and Delta-EE expert Rob Castek.
Jon Slowe is joined by Eva Hennig Head of Department for EU Energy Policy at Thüga an alliance of German municipal energy companies (as well as chair of Eurogas’s distribution committee); Keith Owen Head of Systems Development and Energy Strategy at Northern Gas Networks in the UK; and Delta-EE expert Rob Castek.
The Heralds of Hydrogen: The Economic Sectors that are Driving the Hydrogen Economy in Europe
Jan 2021
Publication
This paper looked at 39 hydrogen associations across Europe to understand which economic sectors support the hydrogen transition in Europe and why they do so. Several broad conclusions can be drawn from this paper. It is clear that the support for hydrogen is broad and from a very wide spectrum of economic actors that have clear interests in the success of the hydrogen transition. Motivations for support differ. Sales and market growth are important for companies pursuing professional scientific and technical activities as well as manufacturers of chemicals machinery electronic or electrical equipment and fabricated metals. The increasing cost of CO2 combines with regulatory and societal pressure to decarbonize and concerns from investors about the long-term profitability of sectors with high emissions. This makes hydrogen especially interesting for companies working in the energy transport steel and chemical industries. Another motivation is the ability to keep using existing fixed assets relevant for ports oil and gas companies and natural gas companies. More sector-specific concerns are a technological belief held by some motor vehicle manufacturers in the advantages of FCVs over BEVs for private mobility which is held more widely regarding heavy road transport. Security of supply and diversifying the current business portfolio come up specifically for natural gas companies. Broader concerns about having to shift into other energy technologies as a core business are reasons for interest from the oil and gas sector and ports.
Perhaps the most important lesson is that the hydrogen transition has already begun – but it needs continued policy support and political commitment. Carbon-intensive industries such as steel and chemicals are clearly interested and willing to invest billions but need policy support to avoid carbon leakage to high-carbon competitors before they commit. The gas grid is ready and many operators and utility companies are eager but they need clearance to experiment with blending in hydrogen. Hydrogen road vehicles still face many regulatory hurdles. There are several clusters that can serve as models and nuclei for the future European hydrogen economy in different parts of Europe. However these nuclei will need more public funding and regulatory support for them to grow.
Link to document on Oxford Institute for Energy Studies website
Perhaps the most important lesson is that the hydrogen transition has already begun – but it needs continued policy support and political commitment. Carbon-intensive industries such as steel and chemicals are clearly interested and willing to invest billions but need policy support to avoid carbon leakage to high-carbon competitors before they commit. The gas grid is ready and many operators and utility companies are eager but they need clearance to experiment with blending in hydrogen. Hydrogen road vehicles still face many regulatory hurdles. There are several clusters that can serve as models and nuclei for the future European hydrogen economy in different parts of Europe. However these nuclei will need more public funding and regulatory support for them to grow.
Link to document on Oxford Institute for Energy Studies website
Transitioning to Hydrogen
Jan 2020
Publication
The UK is investigating supplying hydrogen to homes and businesses instead of natural gas by “repurposing” the gas network. It presents a major engineering challenge which has never been done anywhere else in the world.
In a new report titled ‘Transitioning to hydrogen’ experts from a cross-professional engineering institution (PEI) working group including the IET have assessed the engineering risks and uncertainties and concluded there is no reason why repurposing the gas network to hydrogen cannot be achieved. But there are several engineering risks and uncertainties which need to be addressed.
In a new report titled ‘Transitioning to hydrogen’ experts from a cross-professional engineering institution (PEI) working group including the IET have assessed the engineering risks and uncertainties and concluded there is no reason why repurposing the gas network to hydrogen cannot be achieved. But there are several engineering risks and uncertainties which need to be addressed.
Power to Gas Linking Electricity and Gas in a Decarbonising World
Oct 2018
Publication
Since the COP 21 meeting in Paris in December 2015 there has been a growing realisation that with the long-term objective that the energy system should be approaching carbon-neutrality by 2050 continuing to burn significant quantities of fossil-derived natural gas will not be sustainable. If existing natural gas infrastructure is to avoid becoming stranded assets plans to decarbonise the gas system need to be developed as a matter of urgency in the next three to five years given the typical life expectancy of such assets of 20 years or more. One of the options to decarbonise gas is “power-to-gas”: production of hydrogen or renewable methane via electrolysis using surplus renewable electricity. This Energy Insight reviews the status of power-to-gas and makes an assessment of potential future development pathways and the role which it could play in decarbonising the energy system.
Link to document on the OIES website
Link to document on the OIES website
Oxford Energy Podcast – Energy Transition Post-Pandemic in the Gulf: Clean Energy, Sustainability and Hydrogen
Jun 2021
Publication
The COVID-19 pandemic has exacerbated challenges faced by hydrocarbon exporters in the Gulf owing to the global push to transition to cleaner energy sources. In this podcast Manal Shehabi (OIES) discusses with David Ledesma a recent OIES-KFAS workshop held in April 2021 titled “Energy Transition Post-Pandemic in the Gulf States” held with support from the Kuwait Foundation for the Advancement of Sciences (KFAS). They discuss separate but interrelated issues on clean energy economic and climate sustainability and hydrogen. Specially they examine how the global energy transition outlook has changed post-pandemic along with its impacts on Gulf States’ economies and energy transition projects. They explain implications to Gulf states’ sustainability evaluating whether these countries are fiscally sustainable post-pandemic and their urgent need for energy and economic diversification. They focus in on the possibility of the Gulf States’ using hydrogen to diversify both in domestic and export markets evaluating opportunities and challenges for both blue and green hydrogen. A preliminary case study on the economics of hydrogen in Kuwait is highlighted as indication of whether Gulf states can produce green hydrogen competitively. They conclude with policy recommendations to increase economic sustainability and resilience post-pandemic both through the energy transition and responses to it.
The podcast can be found on their website
The podcast can be found on their website
Hydrogen Odorant and Leak Detection: Part 1, Hydrogen Odorant - Project Closure Report
Nov 2020
Publication
This work programme was focused on identifying a suitable odorant for use in a 100% hydrogen gas grid (domestic use such as boilers and cookers). The research involved a review of existing odorants (used primarily for natural gas) and the selection of five suitable odorants based on available literature. One odorant was selected based on possible suitability with a Polymer Electrolyte Membrane (PEM) based fuel cell vehicle which could in future be a possible end-user of grid hydrogen. NPL prepared Primary Reference Materials containing the five odorants in hydrogen at the relevant amount fraction levels (as would be found in the grid) including ones provided by Robinson Brothers (the supplier of odorants for natural gas in the UK). These mixtures were used by NPL to perform tests to understand the effects of the mixtures on pipeline (metal and plastic) appliances (a hydrogen boiler provided by Worcester Bosch) and PEM fuel cells. HSE investigated the health and environmental impact of these odorants in hydrogen. Olfactory testing was performed by Air Spectrum to characterise the ‘smell’ of each odorant. Finally an economic analysis was performed by E4tech. The results confirm that Odorant NB would be a suitable odorant for use in a 100% hydrogen gas grid for combustion applications but further research would be required if the intention is to supply grid hydrogen to stationery fuel cells or fuel cell vehicles. In this case further testing would need to be performed to measure the extent of fuel cell degradation caused by the non-sulphur odorant obtained as part of this work programme and also other UK projects such as the Hydrogen Grid to Vehicle (HG2V) project would provide important information about whether a purification step would be required regardless of the odorant before the hydrogen purity would be suitable for a PEM fuel cell vehicle. If purification was required it would be fine to use Odorant NB as this would be removed during the purification step.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
Tracking the Evolution of a Single Composite Particle During Redox Cycling for Application in H2 Production
Mar 2020
Publication
Composite materials consisting of metal and metal oxide phases are being researched intensively for application in various energy conversion and storage technologies. In these applications composites are often expected to operate under redox conditions at elevated temperature. The understanding of the dynamics of composite phase and morphology evolution during redox cycling is still very limited yet critical to maximising performance and increasing durability. Here we track the microstructural evolution of a single composite particle over 200 redox cycles for hydrogen production by chemical looping using multi-length scale X-ray computed tomography. We show that redox cycling triggers a centrifugal redispersion of the metal phase and a centripetal clustering of porosity both seemingly driven by the asymmetric nature of oxygen exchange in composites. We show that initially the particle develops a large amount of internal porosity which boosts activity but on the long term this facilitates structural and compositional reorganisation and eventually degradation. We also correlate the microstructural data with phase and activity analysis to identify structure-property correlations which not only provide valuable insight into the evolution of composite materials under redox conditions but also for the design of new composite materials with enhanced durability.
UK Hydrogen Strategy
Aug 2021
Publication
The UK’s first-ever Hydrogen Strategy drives forward the commitments laid out in the Prime Minister’s ambitious 10 Point Plan for a green industrial revolution by setting the foundation for how the UK government will work with industry to meet its ambition for 5GW of low carbon hydrogen production capacity by 2030 – the equivalent of replacing natural gas in powering around 3 million UK homes each year as well as powering transport and businesses particularly heavy industry.<br/>A booming UK-wide hydrogen economy could be worth £900 million and create over 9000 high-quality jobs by 2030 potentially rising to 100000 jobs and worth up to £13 billion by 2050. By 2030 hydrogen could play an important role in decarbonising polluting energy-intensive industries like chemicals oil refineries power and heavy transport like shipping HGV lorries and trains by helping these sectors move away from fossil fuels. Low-carbon hydrogen provides opportunities for UK companies and workers across our industrial heartlands.<br/>With government analysis suggesting that 20-35% of the UK’s energy consumption by 2050 could be hydrogen-based this new energy source could be critical to meet our targets of net zero emissions by 2050 and cutting emissions by 78% by 2035 – a view shared by the UK’s independent Climate Change Committee. In the UK a low-carbon hydrogen economy could deliver emissions savings equivalent to the carbon captured by 700 million trees by 2032 and is a key pillar of capitalising on cleaner energy sources as the UK moves away from fossil fuels.
CFD Modelling of Underexpanded Hydrogen Jets Exiting Rectangular Shaped Openings
May 2020
Publication
Underexpanded jet releases from circular nozzles have been studied extensively both experimentally and numerically. However jet releases from rectangular openings have received much less attention and information on their dispersion behaviour is not as widely available. In this paper Computational Fluid Dynamics (CFD) is used to assess the suitability of using a pseudo-source approach to model jet releases from rectangular openings. A comparative study is performed to evaluate the effect of nozzle shape on jet structure and dispersion characteristics for underexpanded hydrogen jet releases. Jet releases issuing from a circular nozzle and rectangular nozzles with aspect ratios ranging from two to eight are modelled including resolution of the near-field behaviour. The experimental work of Ruggles and Ekoto (2012 2014) is used as a basis for validating the modelling approach used and an additional case study in which jets with a stagnation-to-ambient pressure ratio of 300:1 are modelled is also performed. The CFD results show that for the 10:1 pressure ratio release the hazard volume and hazard distance remain largely unaffected by nozzle shape. For the higher pressure release the hazard volume is larger for the rectangular nozzle releases than the equivalent release through a circular orifice though the distance to lower flammability limit is comparable across the range of nozzle shapes considered. For both of the release pressures simulated the CFD results illustrate that a pseudo-source approach produces conservative results for all nozzle shapes considered. This finding has useful practical implications for consequence analysis in industrial applications such as the assessment of leaks from flanges and connections in pipework.
Hydrogen Effects in Corrosion: Discussion
Jun 2017
Publication
This session contained talks on the characterization of hydrogen-enhanced corrosion of steels and nickel-based alloys emphasizing the different observations across length scales from atomic-scale spectrographic to macro-scale fractographic examinations.
This article is the transcription of the recorded discussion of the session ‘Hydrogen Effects in Corrosion’ at the Royal Society discussion meeting Challenges of Hydrogen and Metals 16–18 January 2017. The text is approved by the contributors. M.A.S. transcribed the session and E.L.S. assisted in the preparation of the manuscript.
Link to document download on Royal Society Website
This article is the transcription of the recorded discussion of the session ‘Hydrogen Effects in Corrosion’ at the Royal Society discussion meeting Challenges of Hydrogen and Metals 16–18 January 2017. The text is approved by the contributors. M.A.S. transcribed the session and E.L.S. assisted in the preparation of the manuscript.
Link to document download on Royal Society Website
H2FC SUPERGEN- The Role of Hydrogen and Fuel Cells in Delivering Energy Security for the UK
Mar 2017
Publication
This White Paper has been commissioned by the UK Hydrogen and Fuel Cell (H2FC) SUPERGEN Hub to examine the roles and potential benefits of hydrogen and fuel cell technologies within each sector of future energy systems and the transition infrastructure that is required to achieve these roles. The H2FC SUPERGEN Hub is an inclusive network encompassing the entire UK hydrogen and fuel cells research community with around 100 UK-based academics supported by key stakeholders from industry and government. It is funded by the UK EPSRC research council as part of the RCUK Energy Programme. This paper is the third of four that were published over the lifetime of the Hub with the others examining: (i) low-carbon heat; (ii) energy security; and (iv) economic impacts.
- Hydrogen and fuel cells are now being deployed commercially for mainstream applications.
- Hydrogen can play a major role alongside electricity in the low-carbon economy.
- Hydrogen technologies can support low-carbon electricity systems dominated by intermittent renewables and/or electric heating demand.
- The hydrogen economy is not necessary for hydrogen and fuel cells to flourish.
Thermal Radiation from Cryogenic Hydrogen Jet Fires
Sep 2017
Publication
The thermal hazards from ignited under-expanded cryogenic releases are not yet fully understood and reliable predictive tools are missing. This study aims at validation of a CFD model to simulate flame length and radiative heat flux for cryogenic hydrogen jet fires. The simulation results are compared against the experimental data by Sandia National Laboratories on cryogenic hydrogen fires from storage with pressure up to 5 bar abs and temperature in the range 48–82 K. The release source is modelled using the Ulster's notional nozzle theory. The problem is considered as steady-state. Three turbulence models were applied and their performance was compared. The realizable k-ε model showed the best agreement with experimental flame length and radiative heat flux. Therefore it has been employed in the CFD model along with Eddy Dissipation Concept for combustion and Discrete Ordinates (DO) model for radiation. A parametric study has been conducted to assess the effect of selected numerical and physical parameters on the simulations capability to reproduce experimental data. DO model discretisation is shown to strongly affect simulations indicating 10 × 10 as minimum number of angular divisions to provide a convergence. The simulations have shown sensitivity to experimental parameters such as humidity and exhaust system volumetric flow rate highlighting the importance of accurate and extended publication of experimental data to conduct precise numerical studies. The simulations correctly reproduced the radiative heat flux from cryogenic hydrogen jet fire at different locations.
Industrial Decarbonisation Policies for a UK Net-Zero Target
Dec 2020
Publication
To inform our Sixth Carbon Budget advice the Climate Change Committee (CCC) asked the University of Leeds to undertake independent research to evaluate which policies (and combinations of policies) would enable industrial decarbonisation in line with the UK’s net zero target without inducing carbon leakage. The research focused on policies applicable to the manufacturing sector but with some consideration also given to the policies required to decarbonise the Fossil Fuel Production and Supply and Non-Road Mobile Machinery sectors. This report:
Sets out a comprehensive review of existing policies;
The paper can be downloaded from the CCC website
Sets out a comprehensive review of existing policies;
- Identifies future policy mechanisms that address key challenges in decarbonising industry;
- Explores how combinations of policies might work together strategically in the form of ‘policy packages’ and how these packages might evolve over the period to 2050;
- Evaluates a series of illustrative policy packages and considers any complementary policies required to minimise carbon leakage and deliver ‘just’ industrial decarbonisation.
- The findings were developed through a combination of literature review and extensive stakeholder engagement with industry government and academic experts.
The paper can be downloaded from the CCC website
Mechanisms of Hydrogen Embrittlement in Steels: Discussion
Jun 2017
Publication
This discussion session interrogated the current understanding of hydrogen embrittlement mechanisms in steels. This article is a transcription of the recorded discussion of ‘Hydrogen in steels’ at the Royal Society Scientific Discussion Meeting ‘The challenges of hydrogen and metals’ 16–18 January 2017.
The text is approved by the contributors. E.L.S. transcribed the session. M.P. assisted in the preparation of the manuscript
Link to document download on Royal Society Website
The text is approved by the contributors. E.L.S. transcribed the session. M.P. assisted in the preparation of the manuscript
Link to document download on Royal Society Website
Modelling the UK Energy System: Practical Insights for Technology Development and Policy Making
Jun 2014
Publication
The Energy Technologies Institute (ETI) has developed an internationally peer-reviewed model of the UK’s national energy system extending across power heat transport and infrastructure. The Energy System Modelling Environment (ESME) is a policy neutral system-wide optimisation model. It models the key technology and engineering choices taking account of cost engineering spatial and temporal factors.
Key points:
Key points:
- A system-wide perspective informed by modelling is highly relevant because complex energy systems are made more inter-dependent by emissions reduction objectives
- Efforts to cut emissions are substitutable across a national energy system encompassing power heat transport and infrastructure.
- Energy systems are subject to key decision points and it is important to make the right choices in major long lived investments
- Policy makers should place policy in a system-wide context.
- Decarbonisation can be achieved affordably (at around 0.6% of GDP) provided that the most cost effective technologies and strategies to reduce emissions are deployed
- A broad portfolio of technologies is needed to deliver emissions reductions with bio-energy and carbon capture and storage of particular system-wide importance
Understanding and Mitigating Hydrogen Embrittlement of Steels: A Review of Experimental, Modelling and Design Progress from Atomistic to Continuum
Feb 2018
Publication
Hydrogen embrittlement is a complex phenomenon involving several lengthand timescales that affects a large class of metals. It can significantly reduce the ductility and load-bearing capacity and cause cracking and catastrophic brittle failures at stresses below the yield stress of susceptible materials. Despite a large research effort in attempting to understand the mechanisms of failure and in developing potential mitigating solutions hydrogen embrittlement mechanisms are still not completely understood. There are controversial opinions in the literature regarding the underlying mechanisms and related experimental evidence supporting each of these theories. The aim of this paper is to provide a detailed review up to the current state of the art on the effect of hydrogen on the degradation of metals with a particular focus on steels. Here we describe the effect of hydrogen in steels from the atomistic to the continuum scale by reporting theoretical evidence supported by quantum calculation and modern experimental characterisation methods macroscopic effects that influence the mechanical properties of steels and established damaging mechanisms for the embrittlement of steels. Furthermore we give an insight into current approaches and new mitigation strategies used to design new steels resistant to hydrogen embrittlement.<br/>*Correction published see Supplements section
Clean Growth- Transforming Heating Overview of Current Evidence
Dec 2018
Publication
Government has reviewed the evidence base on options for achieving long term heat decarbonisation. This report provides an overview of the key issues arising from our review and seeks to:
- highlight the different characteristics of the main alternative sources of low carbon heat and the approaches to achieving transformational change
- set out strategically important issues ‘strategic inferences’ which we have drawn from the evidence available to help focus the development of our long term policy framework
- identify areas that require further exploration to inform the development of a new long term policy framework for heat
- better understanding of the different options available for decarbonising heating
- a clearer common agenda across industry academia and the public sector to ensure effort and resources are effectively and efficiently applied to long term heat decarbonisation issues
- the strategic inferences identified
- the priority areas requiring further development
- any important omissions
- the parties best placed to deliver in these areas
- opportunities for enhancing co-ordination
Energy White Paper: Powering our Net Zero Future
Dec 2020
Publication
The Prime Minister’s Ten Point Plan has set out the measures that will help ensure the UK is at the forefront of this revolution just as we led the first over two centuries ago. As nations move out of the shadow of coronavirus and confront the challenge of climate change with renewed vigour markets for new green products and services will spring up round the world. Taking action now will help ensure not just that we end our contribution to climate change by achieving our target of net zero emissions. It will help position UK companies and our world class research base to seize the business opportunities which flow from it creating jobs and wealth for our country.
Following on from the Ten Point Plan and the National Infrastructure Strategy the Energy White Paper provides further clarity on the Prime Minister’s measures and puts in place a strategy for the wider energy system that:
Following on from the Ten Point Plan and the National Infrastructure Strategy the Energy White Paper provides further clarity on the Prime Minister’s measures and puts in place a strategy for the wider energy system that:
- Transforms energy building a cleaner greener future for our country our people and our planet
- Supports a green recovery growing our economy supporting thousands of green jobs across the country in new green industries and leveraging new green export opportunities
- Creates a fair deal for consumers protecting the fuel poor providing opportunities to save money on bills giving us warmer more comfortable homes and balancing investment against bill impacts.
Hydrogen Production by Steam Reforming of DME in a Large Scale CFB Reactor. Part I: Computational Model and Predictions
Oct 2015
Publication
This study presents a computational fluid dynamic (CFD) study of Dimethyl Ether steam reforming (DME-SR) in a large scale Circulating Fluidized Bed (CFB) reactor. The CFD model is based on Eulerian–Eulerian dispersed flow and solved using commercial software (ANSYS FLUENT). The DME-SR reactions scheme and kinetics in the presence of a bifunctional catalyst of CuO/ZnO/Al2O3+ZSM-5 were incorporated in the model using in-house developed user-defined function. The model was validated by comparing the predictions with experimental data from the literature. The results revealed for the first time detailed CFB reactor hydrodynamics gas residence time temperature distribution and product gas composition at a selected operating condition of 300 °C and steam to DME mass ratio of 3 (molar ratio of 7.62). The spatial variation in the gas species concentrations suggests the existence of three distinct reaction zones but limited temperature variations. The DME conversion and hydrogen yield were found to be 87% and 59% respectively resulting in a product gas consisting of 72 mol% hydrogen. In part II of this study the model presented here will be used to optimize the reactor design and study the effect of operating conditions on the reactor performance and products.
Blended Hydrogen: The UK Public’s Perspective
Nov 2019
Publication
Hydrogen is increasingly being positioned as an important component of the UK’s Net Zero ambitions and commitments. In particular hydrogen could be an appropriate way to decarbonise the heat produced for domestic and industrial buildings. It is possible that hydrogen could replace natural gas in the UK gas network achieving key carbon emissions reduction targets while enabling homes to be heated to a similar level and standard as they currently are.<br/>In the interim small amounts of hydrogen will soon be blended into current natural gas supplies. The premise of this idea is to blend hydrogen into the existing gas network in small enough quantities to not require any adjustments to domestic cookers boilers and other gas-fired appliances but in large enough quantities to generate significant immediate reductions in carbon emissions. Three trials will take place between 2019 and 2022 as part of the HyDeploy project with the aim of demonstrating that hydrogen blending can occur at scale with no safety implications and no disruption to users.<br/>Public perceptions and acceptance of hydrogen will be pivotal in this scenario. At present there is very little indication of how acceptable hydrogen will be for heating homes and questions around safety cost and performance are only beginning to be understood and addressed.<br/>This report investigates public perceptions of blended hydrogen as a fuel for UK homes. In March 2019 we administered a survey to a sample (n=742) representative of the UK adult population in terms of age sex ethnicity and personal income. Our survey covered initial perceptions values and knowledge of hydrogen; the possibilities and pitfalls of hydrogen blending; public trust; and participants’ overall support for hydrogen. Key Findings and Conclusions and Recommendations for Policy and Practice follow immediately with the full report beginning on p.6.
A Mountain to Climb? Tracking Progress in Scaling Up Renewable Gas Production in Europe
Oct 2019
Publication
In the last couple of years there has been increasing recognition by key players in the European gas industry that to mitigate the risk of terminal decline in the context of a decarbonising energy system there will need to be rapid scale up of decarbonised gas. This has led to several projections of the scale of decarbonised gas which could potentially be supplied by 2030 2040 or 2050. This paper joint with the Sustainable Gas Institute at Imperial College London considers the very significant rate of scale up and the significant cost reductions contemplated by such projections. Based on a database of actual announced projects (both committed and in earlier stages of development) for production of decarbonised gas it then considers the extent to which project activity is consistent with meeting the ambitious projections. It identifies a significant gap in current levels of activity largely because there is not yet sufficient economic incentive for investors to develop the required projects. It is intended that this paper will form the basis of continued tracking of the level of activity over the coming years to help inform industry players of further actions which may be required.
Hydrogen Production by Fluidized Bed Reactors: A Quantitative Perspective Using the Supervised Machine Learning Approach
Jul 2021
Publication
The current hydrogen generation technologies especially biomass gasification using fluidized bed reactors (FBRs) were rigorously reviewed. There are involute operational parameters in a fluidized bed gasifier that determine the anticipated outcomes for hydrogen production purposes. However limited reviews are present that link these parametric conditions with the corresponding performances based on experimental data collection. Using the constructed artificial neural networks (ANNs) as the supervised machine learning algorithm for data training the operational parameters from 52 literature reports were utilized to perform both the qualitative and quantitative assessments of the performance such as the hydrogen yield (HY) hydrogen content (HC) and carbon conversion efficiency (CCE). Seven types of operational parameters including the steam-to-biomass ratio (SBR) equivalent ratio (ER) temperature particle size of the feedstock residence time lower heating value (LHV) and carbon content (CC) were closely investigated. Six binary parameters have been identified to be statistically significant to the performance parameters (hydrogen yield (HY)) hydrogen content (HC) and carbon conversion efficiency (CCE) by analysis of variance (ANOVA). The optimal operational conditions derived from the machine leaning were recommended according to the needs of the outcomes. This review may provide helpful insights for researchers to comprehensively consider the operational conditions in order to achieve high hydrogen production using fluidized bed reactors during biomass gasification.
Reference Standard for Low Pressure Hydrogen Utilisation
May 2021
Publication
This standard has been created for the specific purposes of the Hy4Heat programme. The standard was commissioned in 2018 and this version was considered and approved by the relevant IGEM committees in May of 2020. This version of the standard was developed using the latest publicly available information at that time and may include some conservative requirements which further research may deem not necessary. The supplement will be updated regularly following the publication of new research into the application of hydrogen.
This Reference Standard aims to identify and discuss the principles required for the safety and integrity of Hydrogen installation and utilisation in premises.
This document intends to:
The standard is available to download through the IGEM website here.
This Reference Standard aims to identify and discuss the principles required for the safety and integrity of Hydrogen installation and utilisation in premises.
This document intends to:
- provide a point of reference for those requiring an understanding of the implications of using hydrogen as a distributed gas in properties
- detail the characteristics of Hydrogen
- detail the comparisons between hydrogen and Natural Gas (NG)
- discuss the safety implications of using hydrogen
- discuss the implications for materials when using hydrogen
- discuss the implications for the installation and use of using hydrogen in domestic & smaller commercial buildings.
The standard is available to download through the IGEM website here.
World Energy Issues Monitor 2018: Perspectives on the Grand Energy Transition
May 2018
Publication
The World Energy Issues Monitor provides the views of energy leaders from across the globe to highlight the key issues of uncertainty importance and developing signals for the future.
The World Energy Issues Monitor Tool presents in one place dynamic map views of the nine years of Issues Monitor data that has been collated by the World Energy Council. The maps convey a narrative of the key energy issues regional and local variances and how these have changed over time. The tool allows the preparation of different maps for comparison and allows the manipulation of data by geography over time or by highlighting of specific energy issues.
The World Energy Issues Monitor Tool presents in one place dynamic map views of the nine years of Issues Monitor data that has been collated by the World Energy Council. The maps convey a narrative of the key energy issues regional and local variances and how these have changed over time. The tool allows the preparation of different maps for comparison and allows the manipulation of data by geography over time or by highlighting of specific energy issues.
- The geographical views can now be broken out into a country level.
- The time view allows you to see how specific issues have developed whether globally at a regional or country level
- Issues can also be viewed according to certain categories such as OECD non-OECD G20 countries innovators
Hy4Heat Annex To Site Specific Safety Case for Hydrogen Community Demonstration - Work Package 7
May 2021
Publication
The Hy4Heat Safety Assessment has focused on assessing the safe use of hydrogen gas in certain types of domestic properties and buildings. The summary reports (the Precis and the Safety Assessment Conclusions Report) bring together all the findings of the work and should be looked to for context by all readers. The technical reports should be read in conjunction with the summary reports. While the summary reports are made as accessible as possible for general readers the technical reports may be most accessible for readers with a degree of technical subject matter understanding. All of the safety assessment reports have now been reviewed by the HSE<br/>Annex prepared to support Site Specific Safety Cases for hydrogen gas community demonstrations based on work undertaken by the Hy4Heat programme. It covers a collection of recommended risk reduction measures for application downstream of the Emergency Control Valve (ECV)
Decarbonising UK Transport: Implications for Electricity Generation, Land Use and Policy
Dec 2022
Publication
To ensure the UK’s net zero targets are met the transition from conventionally fueled transport to low emission alternatives is necessary. The impact from increased decarbonised electricity generation on ecosystem services (ES) and natural capital (NC) are not currently quantified with decarbonisation required to minimise impacts from climate change. This study aims to project the future electric and hydrogen energy demand between 2020 and 2050 for car bus and train to better understand the land/sea area that would be required to support energy generation. In this work predictions of the geospatial impact of renewable energy (onshore/offshore wind and solar) nuclear and fossil fuels on ES and NC were made considering generation mix number of generation installations and energy density. Results show that electric transport will require ~136599 GWh for all vehicle types analysed in 2050 much less than hydrogen transport at ~425532 GWh. We estimate that to power electric transport at least 1515 km2 will be required for solar 1672 km2 for wind and 5 km2 for nuclear. Hydrogen approximately doubles this requirement. Results provide an approximation of the future demands from the transport sector on land and sea area use indicating that a combined electric and hydrogen network will be needed to accommodate a range of socio-economic requirements. While robust assessments of ES and NC impacts are critical in future policies and planning significant reductions in energy demands through a modal shift to (low emission) public transport will be most effective in ensuring a sustainable transport future.
The Compatibility of Onshore Petroleum with Meeting the UK’s Carbon Budgets
Jul 2016
Publication
The Committee’s report ‘The compatibility of UK onshore petroleum with meeting the UK’s carbon budgets’ is the result of a new duty under the Infrastructure Act 2015. This duty requires the CCC to advise the Secretary of State for Energy and Climate Change about the implications of exploitation of onshore petroleum including shale gas for meeting UK carbon budgets.<br/>The CCC’s report finds that the implications of UK shale gas exploitation for greenhouse gas emissions are subject to considerable uncertainty – from the size of any future industry to the potential emissions footprint of shale gas production. It also finds that exploitation of shale gas on a significant scale is not compatible with UK carbon budgets or the 2050 commitment to reduce emissions by at least 80% unless three tests are satisfied.
Reducing Emissions in Scotland – 2017 Progress Report
Sep 2017
Publication
The Scottish Act sets a long-term target to reduce emissions of greenhouse gases (GHGs) by at least 80% in 2050 relative to 1990 with an interim target to reduce emissions by 42% in 2020. Secondary legislation passed in October 2010 and October 2011 also set a series of annual emission reduction targets for 2010 to 2022 and 2023 to 2027 respectively. We advised the Scottish Government on annual targets for the period 2028 to 2032 in March 2016 and July 2016.<br/>The report reveals that Scotland’s annual emissions reduction target for 2014 was met with gross Scottish greenhouse gas emissions including international aviation and shipping falling by 8.6% in 2014. This compares to a 7.3% fall for the UK as a whole. Since 1990 gross Scottish emissions have fallen nearly 40% compared to nearly 33% at a UK level.
Estimation of an Allowable Hydrogen Permeation Rate From Road Vehicle Compressed Gaseous Hydrogen Storage Systems In Typical Garages- Part 3
Sep 2009
Publication
The formation of a flammable hydrogen-air mixture is a major safety concern especially for closed space. This hazardous situation can arise when considering permeation from a car equipped with a composite compressed hydrogen tank with a non-metallic liner in a closed garage. In the following paper a scenario is developed and analysed with a simplified approach and a numerical simulation in order to estimate the evolution of hydrogen concentration. The system is composed of typical size garage and hydrogen car’s tank. Some parameters increasing permeation rate (i.e. tank’s material thickness and pressure) have been chosen to have a conservative approach. A close look on the top of tank surface showed that the concentration grows as square root of time and does not exceed 8.2×10-3 % by volume. Also a simplified comparative analysis estimated that the buoyancy of hydrogen-air mixture prevails on the diffusion 35 seconds after permeation starts in good agreement with simulation where time is at about 80 seconds. Finally the numerical simulations demonstrated that across the garage height the hydrogen is nearly distributed linearly and the difference in hydrogen concentration at the ceiling and floor is negligible (i.e. 3×10-3 %).
Numerical Simulation of Large Scale Hydrogen Detonation
Sep 2009
Publication
The present work is concerned with numerical simulations of large scale hydrogen detonations. Euler equations have been solved along with a single step reaction for the chemistry. Total variation diminishing (TVD) numerical schemes are used for shock capturing. The equations are solved in parallel in a decomposed domain. Predictions were firstly conducted with a small domain to ensure that the reaction scheme has been properly tuned to capture the correct detonation pressure and velocity. On this basis simulations were set up for the detonation tests carried out at the RUT tunnel facilities in Russia. This is one of the standard benchmark test cases selected for HYSAFE [1]. Comparison is made between the predictions and measurements. Reasonably good agreement has been obtained on pressure decay and the propagation speed of detonation. Further simulations were then conducted for a hypothetical hydrogen-air cloud in the open to assess the impulse as well as overpressure. The effects of cloud height width were investigated in the safety context.
On Numerical Simulation of Liquefied and Gaseous Hydrogen Releases at Large Scales
Sep 2005
Publication
The large eddy simulation (LES) model developed at the University of Ulster has been applied to simulate releases of 5.11 m3 liquefied hydrogen (LH2) in open atmosphere and gaseous hydrogen (GH2) in 20-m3 closed vessel. The simulations of a spill of liquefied hydrogen confirmed the advantage of LES application to reproduce experimentally observed eddy structure of hydrogen-air cloud. The inclination angle of simulated cloud is close to experimentally reported 300. The processes of two phase hydrogen release and heat transfer were simplified by inflow of gaseous hydrogen with temperature 20 K equal to boiling point. It is shown that difference in inflow conditions geometry and grid resolution affects simulation results. It is suggested that phenomenon of air condensationevaporation in the cloud in temperature range 20-90 K should be accounted for in future. The simulations reproduced well experimental data on GH2 release and transport in 20-m3 vessel during 250 min including a phenomenon of hydrogen concentration growth at the bottom of the vessel. Higher experimental hydrogen concentration at the bottom is assumed to be due to non-uniformity of temperature of vessel walls generating additional convection. The comparison of convective and diffusion terms in Navie-Stokes equations has revealed that a value of convective term is more than order of magnitude prevail over a value of turbulent diffusion term. It is assumed that the hydrogen transport to the bottom of the vessel is driven by the remaining chaotic flow velocities superimposed on stratified hydrogen concentration field. Further experiments and simulations with higher accuracy have to be performed to confirm this phenomenon. It has been demonstrated that hydrogen-air mixture became stratified in about 1 min after release was completed. However one-dimensional models are seen not capable to reproduce slow transport of hydrogen during long period of time characteristic for scenarios such as leakage in a garage.
H21- Strategic Modelling Major Urban Centres
Aug 2019
Publication
This report summarises the results of an independent audit carried out by DNV GL on the model conversions from natural gas to hydrogen for the models being used as a benchmark for the wider UK proposed hydrogen conversion of the natural gas network. The detailed model conversion process was derived from the H21 modelling meetings and the detailed notes were put together by NGN as a basic guide which has been included in Appendix A and is summarised as follows:
- Current 5 year planning model is updated and then used to generate a Replacement Expenditure (REPEX) natural gas model which would remove metallic pipes from the networks by insertion where possible
- Merging models together to form larger networks where required
- Preparation for conversion to hydrogen which would include the District Governor (DG) capacity increases to run the additional model flows
- Conversion of the models to hydrogen by changing demands to thermal and the gas characteristics to those of hydrogen
- Applying reinforcement to remove pressure failures.
Project Cavendish - National Grid Gas Transmission
Sep 2020
Publication
The Isle of Grain (IoG) presents a technically feasible commercially viable strategic location to build and operate a hydrogen production facility which would be a key enabler to the UK meeting the Net Zero 2050 target.
As highlighted in the ‘Net Zero – The UK’s contribution to stopping global warming’ report published by The Committee on Climate Change in May 2019 hydrogen is set to have a major part to play in reducing UK carbon dioxide emissions. Carbon Capture and Storage (CCS) is also seen as essential to support those supplies.
The report further recognises that this will involve increased investments and that CCS and hydrogen will require both capital funding and revenue support.
For hydrogen to have a part to play in the decarbonisation of London and the south east of England a large-scale hydrogen production facility will be required which will provide a multi vector solution through the decarbonisation of the gas grid.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
As highlighted in the ‘Net Zero – The UK’s contribution to stopping global warming’ report published by The Committee on Climate Change in May 2019 hydrogen is set to have a major part to play in reducing UK carbon dioxide emissions. Carbon Capture and Storage (CCS) is also seen as essential to support those supplies.
The report further recognises that this will involve increased investments and that CCS and hydrogen will require both capital funding and revenue support.
For hydrogen to have a part to play in the decarbonisation of London and the south east of England a large-scale hydrogen production facility will be required which will provide a multi vector solution through the decarbonisation of the gas grid.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
Reducing Emissions in Scotland 2019 Progress Report
Dec 2019
Publication
This is the eighth annual Progress Report to the Scottish Parliament required by Scottish Ministers under the Climate Change (Scotland) Act 2009. It assesses Scotland’s progress in achieving its legislated targets to reduce greenhouse gas emissions.<br/>Overall greenhouse gas emissions reduced by 3% in 2017 compared to a 10% fall in 2016. The fall was again led by the power sector due in large part to Scotland’s first full year of coal-free electricity generation. Recent performance in other sectors shows only incremental improvement at best and unless emissions reductions are delivered economy-wide Scotland is at risk of missing its new interim target of a 56% reduction in emissions by 2020. Setting a net-zero greenhouse gas emissions target for 2045 represents a step-change in ambition for Scotland. The Scottish Parliament’s 2030 target to reduce emissions by 75% will be extremely challenging to meet. It must be backed up by steps to drive meaningful emissions reductions immediately.<br/>Scotland’s Programme for Government 2019-20 alongside other recent policies sent a clear signal that the Scottish Government is taking its more ambitious targets seriously but there is much more to do.Scotland’s ability to deliver its net-zero target is contingent on action taken in the UK and vice versa.
Next Steps for UK Heat Policy
Oct 2016
Publication
Heating and hot water for UK buildings make up 40% of our energy consumption and 20% of our greenhouse gas emissions. It will be necessary to largely eliminate these emissions by around 2050 to meet the targets in the Climate Change Act and to maintain the UK contribution to international action under the Paris Agreement.<br/>Progress to date has stalled. The Government needs a credible new strategy and a much stronger policy framework for buildings decarbonisation over the next three decades. Many of the changes that will reduce emissions will also contribute toward modern affordable comfortable homes and workplaces and can be delivered alongside a major expansion in the number of homes. This report considers that challenge and sets out possible steps to meet it.
Numerical Study of a Highly Under-Expanded Hydrogen Jet
Sep 2005
Publication
Numerical simulations are carried out for a highly under-expanded hydrogen jet resulting from an accidental release of high-pressure hydrogen into the atmospheric environment. The predictions are made using two independent CFD codes namely CFX and KIVA. The KIVA code has been substantially modified by the present authors to enable large eddy simulation (LES). It employs a oneequation sub-grid scale (SGS) turbulence model which solves the SGS kinetic energy equation to allow for more relaxed equilibrium requirement and to facilitate high fidelity LES calculations with relatively coarser grids. Instead of using the widely accepted pseudo-source approach the complex shock structures resulting from the high under-expansion is numerically resolved in a small computational domain above the jet exit. The computed results are used as initial conditions for the subsequent hydrogen jet simulation. The predictions provide insight into the shock structure and the subsequent jet development. Such knowledge is valuable for studying the ignition characteristics of high-pressure hydrogen jets in the safety context.
Physics of Spontaneous Ignition of High-Pressure Hydrogen Release and Transition to Jet Fire
Sep 2009
Publication
The main objective of this study is an insight into physical phenomena underlying spontaneous ignition of hydrogen at sudden release from high pressure storage and its transition into the sustained jet fire. This paper describes modelling and large eddy simulation (LES) of spontaneous ignition dynamics in a tube with a rupture disk separating high pressure hydrogen storage and the atmosphere. Numerical experiments carried out by a LES model have provided an insight into the physics of the spontaneous ignition phenomenon. It is demonstrated that a chemical reaction commences in a boundary layer within the tube and propagates throughout the tube cross-section after that. Simulated by the LES model dynamics of flame formation outside the tube has reproduced experimental observation of combustion by high-speed photography including vortex induced “flame separation". It is concluded that the model developed can be applied for hydrogen safety engineering in particular for development of innovative pressure relief devices.
Prediction of the Lift-off, Blow-out and Blow-off Stability Limits of Pure Hydrogen and Hydrogen and Hydrocarbon Mixture Jet Flames
Sep 2007
Publication
The paper presented experimental studies of the liftoff and blowout stability of pure hydrogen hydrogen/propane and hydrogen/methane jet flam es using a 2 mm burner. Carbon dioxide and Argon gas were also used in the study for the comparison with hydrocarbon fuel. Comparisons of the stability of H 2/C3H8 H 2/CH4 H 2/Ar and H 2/CO2 flames showed that H 2/C3H8 produced the highest liftoff height and H 2/CH4 required highest liftoff and blowoff velocities. The non-dimensional analysis of liftoff height approach was used to correlate liftoff data of H 2 H2-C3H8 H 2-CO2 C 3H8 and H2-Ar jet flames tested in the 2 mm burner. The suitability of extending the empirical correlations based on hydrocarbon flames to both hydrogen and hydrogen/ hydrocarbon flames was examined.
Scenarios for Deployment of Hydrogen in Meeting Carbon Budgets (E4tech)
Nov 2015
Publication
This research considers the potential role of hydrogen in meeting the UK’s carbon budgets. It was written by consultancy E4tech.<br/>The CCC develops scenarios for the UK’s future energy system to assess routes to decarbonisation and to advise UK Government on policy options. Uncertainty to 2050 is considerable and so different scenarios are needed to assess different trajectories targets and technology combinations. Some of these scenarios assess specific technologies or fuels which have the potential to make a significant contribution to future decarbonisation.<br/>Hydrogen is one such fuel. It has been included in limited quantities in some CCC scenarios but not extensively examined in part due to perceived or anticipated higher costs than some other options. But as hydrogen technology is developed and deployed the cost projections and other performance indicators have become more favourable.
Modelling of Lean Uniform and Non-Uniform Hydrogen-Air Mixture Explosions in a Closed Vessel
Sep 2009
Publication
Simulation of hydrogen-air mixture explosions in a closed large-scale vessel with uniform and nonuniform mixture compositions was performed by the group of partners within the EC funded project “Hydrogen Safety as an Energy Carrier” (HySafe). Several experiments were conducted previously by Whitehouse et al. in a 10.7 m3 vertically oriented (5.7-m high) cylindrical facility with different hydrogen-air mixture compositions. Two particular experiments were selected for simulation and comparison as a Standard Benchmark Exercise (SBEP) problem: combustion of uniform 12.8% (vol.) hydrogen-air mixture and combustion of non-uniform hydrogen-air mixture with average 12.6% (vol.) hydrogen concentration across the vessel (vertical stratification 27% vol. hydrogen at the top of the vessel 2.5% vol. hydrogen at the bottom of the vessel); both mixtures were ignited at the top of the vessel. The paper presents modelling approaches used by the partners comparison of simulation results against the experiment data and conclusions regarding the non-uniform mixture combustion modelling in real-life applications.
Towards Hydrogen Safety Education and Training
Sep 2005
Publication
The onset and further development of the hydrogen economy are known to be constrained by safety barriers as well as by the level of public acceptance of new applications. Educational and training programmes in hydrogen safety which are currently absent in Europe are considered to be a key instrument in lifting these limitations and to ensure the safe introduction of hydrogen as an energy carrier. Therefore the European Network of Excellence ‘Safety of Hydrogen as an Energy Carrier’ (NoE HySafe) embarked on the establishment of the e-Academy of Hydrogen Safety. This work is led by the University of Ulster and carried out in cooperation with international partners from five other universities (Universidad Politecnica de Madrid Spain; University of Pisa Italy; Warsaw University of Technology Poland; Instituto Superior Technico Portugal; University of Calgary Canada) two research institutions (Forschungszentrum Karlsruhe and Forschungszentrum Juelich Germany) and one enterprise (GexCon Norway). The development of an International Curriculum on Hydrogen Safety Engineering aided by world-class experts from within and outside NoE HySafe is of central importance to the establishment of the e-Academy of Hydrogen Safety. Despite its key role in identifying the knowledge framework of the subject matter and its role in aiding educators with the development of teaching programmes on hydrogen safety no such curriculum appears to have been developed previously. The current structure of the International Curriculum on Hydrogen Safety Engineering and the motivation behind it are described in this paper. Future steps in the development of a system of hydrogen safety education and training in Europe are briefly described.
Digital Navigation of Energy–structure–function Maps for Hydrogen-bonded Porous Molecular Crystals
Feb 2021
Publication
Energy–structure–function (ESF) maps can aid the targeted discovery of porous molecular crystals by predicting the stable crystalline arrangements along with their functions of interest. Here we compute ESF maps for a series of rigid molecules that comprise either a triptycene or a spiro-biphenyl core functionalized with six different hydrogen-bonding moieties. We show that the positioning of the hydrogen-bonding sites as well as their number has a profound influence on the shape of the resulting ESF maps revealing promising structure–function spaces for future experiments. We also demonstrate a simple and general approach to representing and inspecting the high-dimensional data of an ESF map enabling an efficient navigation of the ESF data to identify ‘landmark’ structures that are energetically favourable or functionally interesting. This is a step toward the automated analysis of ESF maps an important goal for closed-loop autonomous searches for molecular crystals with useful functions.
Experimental Study on Hydrogen Explosions in a Full-scale Hydrogen Filling Station Model
Sep 2005
Publication
In order for fuel cell vehicles to develop a widespread role in society it is essential that hydrogen refuelling stations become established. For this to happen there is a need to demonstrate the safety of the refuelling stations. The work described in this paper was carried out to provide experimental information on hydrogen outflow dispersion and explosion behaviour. In the first phase homogeneous hydrogen-air-mixtures of a known concentration were introduced into an explosion chamber and the resulting flame speed and overpressures were measured. Hydrogen concentration was the dominant factor influencing the flame speed and overpressure. Secondly high-pressure hydrogen releases were initiated in a storage room to study the accumulation of hydrogen. For a steady release with a constant driving pressure the hydrogen concentration varied as the inlet airflow changed depending on the ventilation area of the room the external wind conditions and also the buoyancy induced flows generated by the accumulating hydrogen. Having obtained this basic data the realistic dispersion and explosion experiments were executed at full-scale in the hydrogen station model. High-pressure hydrogen was released from 0.8-8.0mm nozzle at the dispenser position and inside the storage room in the full-scale model of the refuelling station. Also the hydrogen releases were ignited to study the overpressures that can be generated by such releases. The results showed that overpressures that were generated following releases at the dispenser location had a clear correlation with the time of ignition distance from ignition point.
Initial Assessment of the Impact of Jet Flame Hazard from Hydrogen Cars in Road Tunnels and the Implication on Hydrogen Car Design
Sep 2007
Publication
Underground or partial underground tunnels form a very important part of modern road transportation systems. As the development of hydrogen cars advancing into the markets it is unavoidable in the near future that hydrogen cars would become the users of ordinary road tunnels. This paper discusses potential fire scenarios and fire hazards of hydrogen cars in road tunnels and implications on the fire safety measures and ventilation systems in existing tunnels. The information needed for carry out risk assessment of hydrogen cars in road tunnels are discussed. hydrogen has a low ignition energy and wide flammable range suggesting that leaks have a high probability of ignition and result hydrogen flame. CFD simulations of hydrogen fires in a full scale 5m by 5m square cross-section tunnel were carried out. The effect of the ventilation on controlling the back-layering and the downstream flame are discussed.
Molecular Transport Effects of Hydrocarbon Addition on Turbulent Hydrogen Flame Propagation
Sep 2007
Publication
We analytically investigated the influence of light hydrocarbons on turbulent premixed H2/air atmospheric flames under lean conditions in view of safe handling of H2 systems applications in H2 powered IC engines and gas turbines and also with an orientation towards modelling of H2 combustion. For this purpose an algebraic flame surface wrinkling model included with pressure and fuel type effects is used. The model predictions of turbulent premixed flames are compared with the set of corresponding experimental data of Kido et al. (Kido Nakahara et al. 2002). These expanding spherical flame data include H2–air mixtures doped with CH4 and C3H8 while the overall equivalence ratio of all the fuel/air mixtures is fixed at 0.8 for constant unstretched laminar flame speed of 25 cm/s by varying N2 composition. The model predictions show that there is little variation in turbulent flame speed ST for C3H8 additions up to 20-vol%. However for 50 vol% doping flame speed decreases by as much as 30 % from 250 cm/s that of pure H2–air mixtures for turbulence intensity of 200 cm/s. With respect to CH4 for 50 vol% doping ST reduces by only 6 % cf. pure H2/air mixture. In the first instance the substantial decrease of ST with C3H8 addition may be attributed to the increase in the Lewis number of the dual-fuel mixture and proportional restriction of molecular mobility of H2. That is this decrease in flame speed can be explained using the concept of leading edges of the turbulent flame brush (Lipatnikov and Chomiak 2005). As these leading edges have mostly positive curvature (convex to the unburned side) preferential-diffusive-thermal instabilities cause recognizable impact on flame speed at higher levels of turbulence with the effect being very strong for lean H2 mixtures. The lighter hydrocarbon substitutions tend to suppress the leading flame edges and possibly transition to detonation in confined structures and promote flame front stability of lean turbulent premixed flames. Thus there is a necessity to develop a predictive reaction model to quantitatively show the strong influence of molecular transport coefficients on ST.
Impact Assessment of Hydrogen Transmission on TD1 Parallel Pipeline Separation Distances
Mar 2021
Publication
The recommended minimum separation distances in IGEM/TD/1 were based on a research programme that studied the different ways in which a failure of one buried natural gas transmission pipeline can affect another similar pipeline installed adjacent to the first taking account of the initial pressure wave propagating through the ground the size of the ground crater produced and the threat of escalation from fire if the second pipeline is exposed. The methodology developed from the research was first published in 2010 and is implemented in a software program (“PROPHET”). The distances in IGEM/TD/1 are generally cautious and are essentially determined by the size of the ground crater produced by pipeline ruptures as predicted by the methodology.
To assess the impact of hydrogen transmission on the recommended separation distances the possibility of one pipeline transporting natural gas and the other transporting hydrogen was considered as well as both pipelines transporting hydrogen. The following steps were carried out to assess the impact of hydrogen transmission on parallel pipeline separation distances drawing on existing knowledge only:
To assess the impact of hydrogen transmission on the recommended separation distances the possibility of one pipeline transporting natural gas and the other transporting hydrogen was considered as well as both pipelines transporting hydrogen. The following steps were carried out to assess the impact of hydrogen transmission on parallel pipeline separation distances drawing on existing knowledge only:
- Estimate the ground pressure loading predicted from a hydrogen pipeline rupture.
- Consider the ground pressure effect on a parallel natural gas or hydrogen pipeline.
- Evaluate available ground crater formation models and assess if existing natural gas model is cautious for hydrogen.
- Consider effects of thermal loading due to hydrogen fires where recommended natural gas separation distances are not met.
- Ground pressure loading: The current natural gas methodology is cautious.
- Ground pressure effects: The current natural gas methodology is applicable (no change for hydrogen).
- Ground crater formation: The current natural gas methodology is cautious for ruptures and applicable for punctures (almost no change for hydrogen).
- Thermal loading: The current natural gas methodology is cautious for the thermal loading from ruptures but not necessarily cautious for punctures. Calculations of the minimum flow velocity required to prevent failure of a natural gas pipeline are not cautious for hydrogen.
Intelligent Hydrogen Fuel Cell Range Extender for Battery Electric Vehicles
May 2019
Publication
Road transport is recognized as having a negative impact on the environment. Policy has focused on replacement of the internal combustion engine (ICE) with less polluting forms of technology including battery electric and fuel cell electric powertrains. However progress is slow and both battery and fuel cell based vehicles face considerable commercialization challenges. To understand these challenges a review of current electric battery and fuel cell electric technologies is presented. Based on this review this paper proposes a battery electric vehicle (BEV) where components are sized to take into account the majority of user requirements with the remainder catered for by a trailer-based demountable intelligent fuel cell range extender. The proposed design can extend the range by more than 50% for small BEVs and 25% for large BEVs (the extended range of vehicles over 250 miles) reducing cost and increasing efficiency for the BEV. It enables BEV manufacturers to design their vehicle battery for the most common journeys decreases charging time to provide convenience and flexibility to the drivers. Adopting a rent and drop business model reduces the demand on the raw materials bridging the gap in the amount of charging (refueling) stations and extending the lifespan for the battery pack.
Can the Current EU Regulatory Framework Deliver Decarbonisation of Gas?
Jun 2020
Publication
This Energy Insight examines the current regulatory framework and challenges facing the natural gas industry (producers transporters suppliers and consumers) during the transition to a zero-carbon economy. The EU has declared its intention to be climate neutral by 2050 which means that the current level of natural gas usage will no longer be possible. However natural gas is a crucial component of energy supply representing 24 per cent of primary energy supply for the EU27+UK and 36 per cent of residential energy consumption. In some countries the use of natural gas is much higher – around 40 per cent of primary energy supply in Netherlands UK and Italy. The current framework impacting gas addresses two different market failures – natural monopolies for gas transportation and the externalities of Greenhouse Gas Emissions. The framework will not deliver decarbonisation of gas as it does not stimulate either supply or demand for alternatives such as hydrogen nor create the conditions to enable gas networks to transition to a decarbonised future. Policy makers need to prioritise their objectives to take account of the trade-offs involved in designing a new framework. Exclusion of certain low carbon technologies risks driving away investors and reduces the chances of targets being met whilst “picking winners” involves risks because of the many uncertainties involved such as future costs and time required to build new value chains.
Link to Document on Oxford Institute for Energy Studies website
Link to Document on Oxford Institute for Energy Studies website
China Progress on Renewable Energy Vehicles: Fuel Cells, Hydrogen and Battery Hybrid Vehicles
Dec 2018
Publication
Clean renewable energy for Chinese cities is a priority in air quality improvement. This paper describes the recent Chinese advances in Polymer Electrolyte Membrane (PEM) hydrogen-fuel-cell-battery vehicles including buses and trucks. Following the 2016 Chinese government plan for new energy vehicles bus production in Foshan has now overtaken that in the EU USA and Japan combined. Hydrogen infrastructure requires much advance to catch up but numbers of filling stations are now increasing rapidly in the large cities. A particular benefit in China is the large number of battery manufacturing companies which fit well into the energy storage plan for hybrid fuel cell buses. The first city to manufacture thousands of PEM-battery hybrid buses is Foshan where the Feichi (Allenbus) company has built a new factory next to a novel fuel cell production line capable of producing 500 MW of fuel cell units per year. Hundreds of these buses are running on local Foshan routes this year while production of city delivery trucks has also been substantial. Results for energy consumption of these vehicles are presented and fitted to the Coulomb theory previously delineated.
Role of batteries and fuel cells in achieving Net Zero- Session 3
Mar 2021
Publication
The House of Lords Science and Technology Committee will hear from officials research funders and leading research consortia about the UK’s strategy for research and development of batteries and fuel cells to help meet the net-zero target.
The Committee will question officials from government departments and research councils about the UK’s increased support for battery development and how the initiatives and funding will evolve. The Committee will compare the support given to fuel cell research and ask how this technology will be developed for applications such as heavy transport. For both technologies it will ask how training will be delivered to provide a skilled workforce.
The Committee will also hear from leaders of research consortia asking them about support for their research sectors and how this compares with countries leading the development of the technologies. The Committee will explore coordination between research into batteries fuel cells and wider strategies such as for hydrogen and whether research for transport can be transferred to applications in other sectors such as power grids and heating.
At 10.00am: Oral evidence
Mr Tony Harper Industrial Strategy Challenge Director Faraday Battery Challenge at UK Research and Innovation (UKRI) at University of Central Lancashire
Dr Lucy Martin Deputy Director of Cross-Council Programmes and lead for Net Zero at University of Central Lancashire
Dr Bob Moran Deputy Director Head of Environment Strategy at University of Central Lancashire
Professor Paul Monks Chief Scientific Adviser at University of Central Lancashire
At 11.00am: Oral evidence
Professor Philip Taylor Director at EPSRC Supergen Energy Networks Hub and Pro-Vice Chancellor for Research and Enterprise at University of Bristol
Professor David Greenwood CEO High Value Manufacturing Catapult at University of Central Lancashire Director Industrial Engagement at University of Central Lancashire and Professor of Advanced Propulsion Systems at University of Warwick
Professor Paul Dodds Professor of Energy Systems at University of Central Lancashire
Possible questions
Parliament TV video of the meeting
This is part three of a three part enquiry.
Part one can be found here and part two can be found here.
The Committee will question officials from government departments and research councils about the UK’s increased support for battery development and how the initiatives and funding will evolve. The Committee will compare the support given to fuel cell research and ask how this technology will be developed for applications such as heavy transport. For both technologies it will ask how training will be delivered to provide a skilled workforce.
The Committee will also hear from leaders of research consortia asking them about support for their research sectors and how this compares with countries leading the development of the technologies. The Committee will explore coordination between research into batteries fuel cells and wider strategies such as for hydrogen and whether research for transport can be transferred to applications in other sectors such as power grids and heating.
At 10.00am: Oral evidence
Mr Tony Harper Industrial Strategy Challenge Director Faraday Battery Challenge at UK Research and Innovation (UKRI) at University of Central Lancashire
Dr Lucy Martin Deputy Director of Cross-Council Programmes and lead for Net Zero at University of Central Lancashire
Dr Bob Moran Deputy Director Head of Environment Strategy at University of Central Lancashire
Professor Paul Monks Chief Scientific Adviser at University of Central Lancashire
At 11.00am: Oral evidence
Professor Philip Taylor Director at EPSRC Supergen Energy Networks Hub and Pro-Vice Chancellor for Research and Enterprise at University of Bristol
Professor David Greenwood CEO High Value Manufacturing Catapult at University of Central Lancashire Director Industrial Engagement at University of Central Lancashire and Professor of Advanced Propulsion Systems at University of Warwick
Professor Paul Dodds Professor of Energy Systems at University of Central Lancashire
Possible questions
- On which aspects of battery and fuel cell research and development is the UK focusing and why?
- How successful have the UK’s new research initiatives been in advancing battery science and application?
- Does battery research receive greater public funding than fuel cell research? If so why?
- What technologies are seen as the most likely options for heavy transport i.e. HGVs buses and trains?
- What is the Government’s strategy for supporting the growth of skilled workers for battery and fuel cell research and development?
- To what extent is battery and fuel cell research and development coordinated in the UK? If so who is responsible for this coordination?
Parliament TV video of the meeting
This is part three of a three part enquiry.
Part one can be found here and part two can be found here.
Optimal Energy Management System Using Biogeography Based Optimization for Grid-connected MVDC Microgrid with Photovoltaic, Hydrogen System, Electric Vehicles and Z-source Converters
Oct 2021
Publication
Currently the technology associated with charging stations for electric vehicles (EV) needs to be studied and improved to further encourage its implementation. This paper presents a new energy management system (EMS) based on a Biogeography-Based Optimization (BBO) algorithm for a hybrid EV charging station with a configuration that integrates Z-source converters (ZSC) into medium voltage direct current (MVDC) grids. The EMS uses the evolutionary BBO algorithm to optimize a fitness function defining the equivalent hydrogen consumption/generation. The charging station consists of a photovoltaic (PV) system a local grid connection two fast charging units and two energy storage systems (ESS) a battery energy storage (BES) and a complete hydrogen system with fuel cell (FC) electrolyzer (LZ) and hydrogen tank. Through the use of the BBO algorithm the EMS manages the energy flow among the components to keep the power balance in the system reducing the equivalent hydrogen consumption and optimizing the equivalent hydrogen generation. The EMS and the configuration of the charging station based on ZSCs are the main contributions of the paper. The behaviour of the EMS is demonstrated with three EV connected to the charging station under different conditions of sun irradiance. In addition the proposed EMS is compared with a simpler EMS for the optimal management of ESS in hybrid configurations. The simulation results show that the proposed EMS achieves a notable improvement in the equivalent hydrogen consumption/generation with respect to the simpler EMS. Thanks to the proposed configuration the output voltage of the components can be upgraded to MVDC while reducing the number of power converters compared with other configurations without ZSC.
HyDeploy2: Quantitative Risk Assessment
Jul 2021
Publication
A consortiumcomprising Cadent Gas Health and Safety Executive – Science Division ITMPower Keele University Northern Gas Networks and Progressive Energy is undertaking the second phase of the research project HyDeploy. The project the first two phase ofwhich are funded under the UK Network Innovation Competition scheme aims to demonstrate that natural gas containing levels of hydrogen beyond the upper limit set out in Schedule 3 of in the Gas Safety (Management) Regulations (GSMR) can be distributed and utilised safely and efficiently in the UK gas distribution networks.<br/>The first phase of the HyDeploy project concludes with a 10-month field trial in which hydrogen will be injected into part of a private gas distribution system owned and operated by Keele University.<br/>The second phase of the HyDeploy project (HyDeploy2) continues on from the work of the first phase and is scheduled to conclude with two 12-month field trials in which hydrogen will be injected into public gas networks owned and operated by Northern Gas Networks and Cadent Gas.<br/>Dave Lander Consulting Limited is providing technical support to the HyDeploy project and this report presents the results of Quantified Risk Assessment (QRA) for the proposed field trial of hydrogen injection into part of a gas distribution system owned and operated by Northern Gas Networks (NGN) near the town of Winlaton in Gateshead Tyne and Wear. The QRA is intended to support an application by NGN for exemption from the legal requirement to only convey gas that is compliant with the requirements of Schedule 3 of the GSMR. The QRA estimates the risk to persons within the trial area affected by the proposed injection. A similar QRA1 was developed for the original HyDeploy field trial at Keele University.<br/>Click on the supplement tab to see the other documents from this report
Contrasting European Hydrogen Pathways: An Analysis of Differing Approaches in Key Markets
Mar 2021
Publication
European countries approach the market ramp-up of hydrogen very differently. In some cases the economic and political starting points differ significantly. While the probability is high that some countries such as Germany or Italy will import hydrogen in the long term other countries such as United Kingdom France or Spain could become hydrogen exporters. The reasons for this are the higher potential for renewable energies but also a technology-neutral approach on the supply side.
Role of Batteries and Fuel Cells in Achieving Net Zero- Session 1
Mar 2021
Publication
The House of Lords Science and Technology Committee will question experts on the role of batteries and fuel cells for decarbonisation and how much they can contribute to meeting the net-zero target.
Tuesday’s evidence session will be the first of the committee’s new decarbonisation inquiry which was launched on Wednesday 3 March and is currently accepting written evidence submissions.
The session will give an overview of battery and fuel cell technologies and their applications in transport and other sectors. The Committee will ask how battery manufacture can be scaled up to meet wide-scale deployment of electric vehicles and whether technical challenges can be overcome to allow batteries and fuel cells to be used in HGVs and trains. The Committee will also investigate the wider use of batteries and fuel cells in various sectors including integration into power grids and heating systems.
Inquiry Role of batteries and fuel cells in achieving Net Zero
Professor Nigel Brandon Dean of the Faculty of Engineering at Imperial College London
Professor Mauro Pasta Associate Professor of Materials at University of Oxford
Professor Pam Thomas CEO at Faraday Institution and Pro Vice Chancellor for Research at University of Warwick
Mr Amer Gaffar Director of Manchester Fuel Cell Innovation Centre at Manchester Metropolitan University
Possible questions
What contribution are battery and fuel cell technologies currently making towards decarbonization in the UK?
What advances do we expect to see in battery and fuel cell technologies and over what timeframes?
How quickly can UK battery and fuel cell manufacture be scaled up to meet electrification demands?
What are the challenges facing technological innovation and deployment in heavy transport?
Are there any sectors where battery and fuel cell technologies are not currently used but could contribute to decarbonisation?
What are the life cycle environmental impacts of batteries and fuel cells?
Parliament TV video of the meeting
This is part one of a three part enquiry.
Part two can be found here and part three can be found here.
Tuesday’s evidence session will be the first of the committee’s new decarbonisation inquiry which was launched on Wednesday 3 March and is currently accepting written evidence submissions.
The session will give an overview of battery and fuel cell technologies and their applications in transport and other sectors. The Committee will ask how battery manufacture can be scaled up to meet wide-scale deployment of electric vehicles and whether technical challenges can be overcome to allow batteries and fuel cells to be used in HGVs and trains. The Committee will also investigate the wider use of batteries and fuel cells in various sectors including integration into power grids and heating systems.
Inquiry Role of batteries and fuel cells in achieving Net Zero
Professor Nigel Brandon Dean of the Faculty of Engineering at Imperial College London
Professor Mauro Pasta Associate Professor of Materials at University of Oxford
Professor Pam Thomas CEO at Faraday Institution and Pro Vice Chancellor for Research at University of Warwick
Mr Amer Gaffar Director of Manchester Fuel Cell Innovation Centre at Manchester Metropolitan University
Possible questions
What contribution are battery and fuel cell technologies currently making towards decarbonization in the UK?
What advances do we expect to see in battery and fuel cell technologies and over what timeframes?
How quickly can UK battery and fuel cell manufacture be scaled up to meet electrification demands?
What are the challenges facing technological innovation and deployment in heavy transport?
Are there any sectors where battery and fuel cell technologies are not currently used but could contribute to decarbonisation?
What are the life cycle environmental impacts of batteries and fuel cells?
Parliament TV video of the meeting
This is part one of a three part enquiry.
Part two can be found here and part three can be found here.
Delivering Net-zero Carbon Heat: Technoeconomic and Whole-system Comparisons of Domestic Electricity- and Hydrogen-driven Technologies in the UK
Apr 2022
Publication
Proposed sustainable transition pathways for moving away from natural gas in domestic heating focus on two main energy vectors: electricity and hydrogen. Electrification would be implemented by using vapourcompression heat pumps which are currently experiencing market growth in many countries. On the other hand hydrogen could substitute natural gas in boilers or be used in thermally–driven absorption heat pumps. In this paper a consistent thermodynamic and economic methodology is developed to assess the competitiveness of these options. The three technologies along with the option of district heating are for the first time compared for different weather/ambient conditions and fuel-price scenarios first from a homeowner’s and then from a wholeenergy system perspective. For the former two-dimensional decision maps are generated to identify the most cost-effective technologies for different combinations of fuel prices. It is shown that in the UK hydrogen technologies are economically favourable if hydrogen is supplied to domestic end-users at a price below half of the electricity price. Otherwise electrification and the use of conventional electric heat pumps will be preferred. From a whole-energy system perspective the total system cost per household (which accounts for upstream generation and storage as well as technology investment installation and maintenance) associated with electric heat pumps varies between 790 and 880 £/year for different scenarios making it the least-cost decarbonisation pathway. If hydrogen is produced by electrolysis the total system cost associated with hydrogen technologies is notably higher varying between 1410 and 1880 £/year. However this total system cost drops to 1150 £/year with hydrogen produced cost-effectively by methane reforming and carbon capture and storage thus reducing the gap between electricity- and hydrogen-driven technologies.
Experimental Investigation of the Effects of Simultaneous Hydrogen and Nitrogen Addition on the Emissions and Combustion of a Diesel Engine
Jan 2014
Publication
Overcoming diesel engine emissions trade-off effects especially NOx and Bosch smoke number (BSN) requires investigation of novel systems which can potentially serve the automobile industry towards further emissions reduction. Enrichment of the intake charge with H2 þ N2 containing gas mixture obtained from diesel fuel reforming system can lead to new generation low polluting diesel engines. This paper investigates the effect of simultaneous H2 þ N2 intake charge enrichment on the emissions and combustion of a compression ignition engine. Bottled H2 þ N2 was simultaneously admitted into the intake pipe of the engine in 4% steps starting from 4% (2% H2 þ 2% N2) up to 16% (v/v). The results showed that under specific operating conditions H2 þ N2 enrichment can offer simultaneous NOx BSN and CO emissions reduction. Apart from regulated emissions nitrogen exhaust components were measured. Marginal N2O and zero NH3 emissions were obtained. NO/NO2 ratio increases when speed or load increases. Under low speed low load operation the oxidation of NO is enhanced by the addition of H2 þ N2 mixture. Finally admission of H2 þ N2 has a detrimental effect on fuel consumption
Hydrogen Tank Rupture in Fire in the Open Atmosphere: Hazard Distance Defined by Fireball
Feb 2021
Publication
The engineering correlations for assessment of hazard distance defined by a size of fireball after either liquid hydrogen spill combustion or high-pressure hydrogen tank rupture in a fire in the open atmosphere (both for stand-alone and under-vehicle tanks) are presented. The term “fireball size” is used for the maximum horizontal size of a fireball that is different from the term “fireball diameter” applied to spherical or semi-spherical shape fireballs. There are different reasons for a fireball to deviate from a spherical shape e.g. in case of tank rupture under a vehicle the non-instantaneous opening of tank walls etc. Two conservative correlations are built using theoretical analysis numerical simulations and experimental data available in the literature. The theoretical model for hydrogen fireball size assumes complete isobaric combustion of hydrogen in air and presumes its hemispherical shape as observed in the experiments and the simulations for tank rupturing at the ground level. The dependence of the fireball size on hydrogen mass and fireball’s diameter-to-height ratio is discussed. The correlation for liquid hydrogen release fireball is based on the experiments by Zabetakis (1964). The correlations can be applied as engineering tools to access hazard distances for scenarios of liquid or gaseous hydrogen storage tank rupture in a fire in the open atmosphere
Extreme Energetic Materials at Ultrahigh Pressures
Jul 2020
Publication
Owing to their extremely high energy density single-bonded polymeric nitrogen and atomic metallic hydrogen are generally regarded as the ultimate energetic materials. Although their syntheses normally require ultrahigh pressures of several hundred gigapascals (GPa) which prohibit direct materials application research on their stability metastability and fundamental properties are valuable for seeking extreme energetic materials through alternative synthetic routes. Various crystalline and amorphous polymeric nitrogens have been discovered between 100 and 200 GPa. Metastability at ambient conditions has been demonstrated for some of these phases. Cubic-gauche and black-phosphorus polymorphs of single-bonded nitrogen are two particularly interesting phases. Their large hystereses warrant further application-inspired basic research of nitrogen. In contrast although metallic hydrogen contains the highest-estimated energy density its picosecond lifetime and picogram quantity make its practical material application impossible at present. “Metallic hydrogen” remains a curiosity-driven basic research pursuit focusing on the pressure-induced evolution of the molecular hydrogen crystal and its electronic band structure from a low-density insulator with a very wide electronic band gap to a semiconductor with a narrow gap to a dense molecular metal and atomic metal and eventually to a previously unknown exotic state of matter. This great experimental challenge is driving relentless advancement in ultrahigh-pressure science and technology.
Hydrogen Jet Fire from a Thermally Activated Pressure Relief Device (TPRD) from Onboard Storage in a Naturally Ventilated Covered Car Park
Aug 2021
Publication
Hydrogen jet fires from a thermally activated pressure relief device (TPRD) on onboard storage are considered for a vehicle in a naturally ventilated covered car park. Computational Fluid Dynamics was used to predict behaviour of ignited releases from a 70 MPa tank into a naturally ventilated covered car park. Releases through TPRD diameters 3.34 2 and 0.5 mm were studied to understand effect on hazard distances from the vehicle. A vertical release and downward releases at 0° 30° and 45° for TPRD diameters 2 and 0.5 mm were considered accounting for tank blowdown. direction of a downward release was found to significantly contribute to decrease of temperature in a hot cloud under the ceiling. Whilst the ceiling is reached by a jet exceeding 300 °C for a release through a TPRD of 2 mm for inclinations of either 0° 30° or 45° an ignited release through a TPRD of 0.5 mm and angle of 45° did not produce a cloud with a temperature above 300 °C at the ceiling during blowdown. The research findings specifically regarding the extent of the cloud of hot gasses have implications for the design of mechanical ventilation systems.
Inefficient Investments as a Key to Narrowing Regional Economic Imbalances
Feb 2022
Publication
Policy led decisions aiming at decarbonizing the economy may well exacerbate existing regional economic imbalances. These effects are seldomly recognised in spatially aggregated top-down and techno-economic decarbonization strategies. Here we present a spatial economic framework that quantifies the gross value added associated with low carbon hydrogen investments while accounting for region-specific factors such as the industrial specialization of regions their relative size and their economic interdependencies. In our case study which uses low carbon hydrogen produced via autothermal reforming combined with carbon capture and storage to decarbonize the energy intensive industries in Europe and in the UK we demonstrate that interregional economic interdependencies drive the overall economic benefits of the decarbonization. Policies intended to concurrently transition to net zero and address existing regional imbalances as in the case of the UK Industrial Decarbonization Challenge should take these local factors into account.
The Future of Gas in Decarbonising European Energy Markets – The Need for a New Approach
Sep 2017
Publication
The European gas industry has argued that gas can be a bridging fuel in the transition to decarbonised energy markets because of the advantages of switching from coal to gas and the role of gas in backing up intermittent renewable power generation. While this remains a logical approach for some countries in others it has proved either not relevant or generally unsuccessful in gaining acceptance with either policymakers or the environmental community. Policy decisions will be taken in the next 5-10 years which will irreversibly impact the future of gas in the period 2030-50. A paradigm shift in commercial time horizons and gas value chain cooperation will be necessary for the industry to embrace decarbonisation technologies (such as carbon capture and storage) which will eventually be necessary if gas is to prolong its future in European energy markets. To ensure a post-2030 future in European energy balances the gas community will be obliged to adopt a new message: `Gas can Decarbonise’ (and remain competitive with other low/zero carbon energy supplies). It will need to back up this message with a strategy which will lead to the decarbonisation of methane starting no later than 2030. Failure to do so will be to accept a future of decline albeit on a scale of decades and to risk that by the time the community engages with decarbonisation non-methane policy options will have been adopted which will make that decline irreversible.
UK Hydrogen Economy: Debate Pack
Dec 2020
Publication
A Westminster Hall debate on the UK hydrogen economy has been scheduled for Thursday 17 December 2020 at 3.00pm. The debate will be led by Alexander Stafford MP. This House of Commons Library debate pack provides background information and press and parliamentary coverage of the issues.<br/><br/>The Government has legally binding targets under the Climate Change Act 2008 to reach ‘net zero’ carbon emissions by 2050. Background information is available from the Library webpage on Climate Change: an overview.<br/><br/>In order to meet the net zero target the use of fossil fuels (without abatement such as carbon capture usage and storage) across the economy will need to be almost entirely phased out by 2050. Hydrogen gas is regarded as an energy option to help decarbonisation especially in relation to applications that may be more challenging to decarbonise. These applications include heating transport (including heavy goods shipping and aviation) and some industrial processes.<br/><br/>The Government has legally binding targets under the Climate Change Act 2008 to reach ‘net zero’ carbon emissions by 2050. Background information is available from the Library webpage on Climate Change: an overview.<br/><br/>In order to meet the net zero target the use of fossil fuels (without abatement such as carbon capture usage and storage) across the economy will need to be almost entirely phased out by 2050. Hydrogen gas is regarded as an energy option to help decarbonisation especially in relation to applications that may be more challenging to decarbonise. These applications include heating transport (including heavy goods shipping and aviation) and some industrial processes.
Oxford Energy Podcast – Hydrogen in Europe
Apr 2021
Publication
The EU and a number of its member states have now published hydrogen strategies and Europe continues to lead the way in the decarbonisation of its gas sector. In this latest OIES Energy Podcast James Henderson talks with Martin Lambert and Simon Schulte about their latest paper entitled “Contrasting European Hydrogen Pathways” which examines the plans in six major EU countries. They discuss the outlook for various forms of hydrogen supply contrasting the potential for green hydrogen from renewable energy with the outlook for blue hydrogen using steam-reforming of methane as well as hydrogen generated from surplus nuclear energy. They also examine the potential sources of demand considering existing use of hydrogen in industrial processes as well as the potential for hydrogen to displace hydrocarbons in the steel and cement industries. Finally the podcast also looks at the potential for imports of hydrogen and its distribution within Europe while also considering some key milestones that can provide indicators of how the region’s hydrogen plans are playing out.
The podcast can be found on their website
The podcast can be found on their website
Offshore Wind and Hydrogen: Solving the Integration Challenge
Sep 2020
Publication
The combination of offshore wind and green hydrogen provides major opportunities for job creation economic growth and regional regeneration as well as attracting inward investment alongside delivering the emission reductions needed to achieve climate neutrality. In order to get to Net Zero emissions in 2050 the UK is likely to need a minimum of 75GW of offshore wind (OSW) and modelling of the energy system indicates that hydrogen will play a major role in integrating the high levels of OSW on the electricity grid.<br/><br/>Some of the key findings from report are listed below:<br/><br/>The UK has vast resources of offshore wind with the potential for over 600GW in UK waters and potentially up to 1000GW. This is well above the he figure of 75-100GW likely to be needed for UK electricity generation by 2050.<br/>The universities in the UK provide the underpinning science and engineering for electrolysers fuel cells and hydrogen and are home to world-leading capability in these areas.<br/>In order to achieve cost reduction and growing a significant manufacturing and export industry it will be crucial to develop green hydrogen in the next 5 years<br/>By 2050 green hydrogen can be cheaper than blue hydrogen. With accelerated deployment green hydrogen costs can be competitive with blue hydrogen by the eary 2030s.<br/>The combination of additional OSW deployment and electrolyser manufacture alone could generate over 120000 new jobs. These are are expected to be based mainly in manufacturing OSW-related activity shipping and mobility<br/>By 2050 it is estimated that the cumulative gross value added (GVA) from supply of electrolysers and additional OSW farm could be up to £320bn where the majority will come from exports of electrolysers to overseas markets.<br/>The report also calls for immediate government intervention and a new national strategy to support the creation of supply and demand in the new industry.<br/><br/>This study was jointly supported by the Offshore Wind Industry Council (OWIC) and ORE Catapult.
Biogas: Pathways to 2030
Mar 2021
Publication
Humans directly or indirectly generate over 105 billion tonnes of organic wastes globally each year all of which release harmful methane and other greenhouse gas emissions directly into the atmosphere as they decompose. These organic wastes include food waste sewage and garden wastes food and drink processing wastes and farm and agricultural wastes. Today only 2% of these are treated and recycled.
By simply managing these important bioresources more effectively we can cut global Greenhouse Gas (GHG) emissions by 10% by 2030. This report maps out how the global biogas industry can enable countries to deliver a 10% reduction in global GHG emissions by 2030. The pathways put humanity back on track to deliver by 2030 on the ambitions of both the Paris Agreement and UN Sustainable Development Goals (SDGs).
The report and the executive summary can be downloaded at this link
By simply managing these important bioresources more effectively we can cut global Greenhouse Gas (GHG) emissions by 10% by 2030. This report maps out how the global biogas industry can enable countries to deliver a 10% reduction in global GHG emissions by 2030. The pathways put humanity back on track to deliver by 2030 on the ambitions of both the Paris Agreement and UN Sustainable Development Goals (SDGs).
The report and the executive summary can be downloaded at this link
The Dawn of Hydrogen - Fuel of the Future
Aug 2021
Publication
This is a time of enormous change for the gas industry as the UK and the world at large attempts to meet the challenges of decarbonisation in the face of climate change. Hydrogen is expected to play a vital role in achieving the government’s commitment of eliminating the UK’s contribution to climate change by 2050 with the industry creating up to 8000 jobs by 2030 and potentially unlocking up to 100000 jobs by the middle of the century. But despite the UK government’s huge ambitions hydrogen is just one piece of the puzzle and it will be necessary to seek solutions that bring the whole energy system together – including not just heat for buildings but hard-to decarbonise areas such as manufacturing road transport aviation and shipping. Here we bring you just a taste of some of the amazing work taking place across the energy sector to understand this fuel more clearly to comprehend its strengths and limitations and to integrate it into our current energy infrastructure. We hope you enjoy this special publication.
Assessment of Full Life-cycle Air Emissions of Alternative Shipping Fuels
Oct 2017
Publication
There is a need for alternative fuels in the shipping sector for two main motivations: to deliver a reduction in local pollutants and comply with existing regulation; and to mitigate climate change and cut greenhouse gas emissions. However any alternative fuel must meet a range of criteria to become a viable option. Key among them is the requirement that it can deliver emissions reductions over its full life-cycle. For a set of fuels comprising both conventional and alternative fuels together with associated production pathways this paper presents a life-cycle assessment with respect to six emissions species: local pollutants sulphur oxides nitrogen oxides and particulate matter; and greenhouse gases carbon dioxide methane and nitrous oxide. While the analysis demonstrates that no widely available fuel exists currently to deliver on both motivations some alternative fuel options have the potential if key barriers can be overcome. Hydrogen or other synthetic fuels rely on decarbonisation of both energy input to production and other feedstock materials to deliver reductions in greenhouse gas emissions. Similarly bio-derived fuels can be an abatement option but only if it can be ensured that land-use change whilst growing biomass does not impact wider potential savings and the sector is able to compete sufficiently for their use. These examples show that crucial barriers are located upstream in the respective fuel life-cycle and that the way to overcome them may reside beyond the scope of the shipping sector alone.
Business Energy and Industrial Strategy Committee Inquiry into Decarbonising Heat in Homes
Dec 2020
Publication
The Hydrogen Taskforce welcomes the opportunity to submit evidence to the Business Energy and Industrial Strategy Committee’s inquiry into decarbonising heat in homes. It is the Taskforce’s view that:
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
- Decarbonising heat is one of the biggest challenges that the UK faces in meeting Net Zero and several solutions will be required;
- Hydrogen can play a valuable role in reducing the cost of decarbonising heat. Its high energy density enables it to be stored cost effectively at scale providing system resilience;
- Hydrogen heating can be implemented at minimal disruption to the consumer;
- The UK holds world-class advantages in hydrogen production distribution and application; and
- Other economies are moving ahead in the development of this sector and the UK must respond.
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
Engineering a Sustainable Gas Future
Nov 2021
Publication
The Institution of Gas Engineers & Managers (IGEM) is the UK’s Professional Engineering Institution supporting individuals and businesses working in the global gas industry. IGEM was founded in 1863 with the purpose of advancing the science and relevant knowledge of gas engineering for the benefit of the public.
As a not-for-profit independent organisation IGEM acts as a trusted source of technical information guidance and services for the gas sector. In today’s net zero context IGEM is focused on engineering a sustainable gas future – we do this by:
This document outlines the current UK gas policy landscape our stance and what contribution we are making as an organisation.
As a not-for-profit independent organisation IGEM acts as a trusted source of technical information guidance and services for the gas sector. In today’s net zero context IGEM is focused on engineering a sustainable gas future – we do this by:
- Helping our members achieve and uphold the highest standards of professional competence to ensure the safety of the public
- Supporting our members in achieving their career goals by providing high quality products services and personal and professional development opportunities
- Acting as the voice of the gas industry when working with stakeholders to develop and improve gas policy.
This document outlines the current UK gas policy landscape our stance and what contribution we are making as an organisation.
Testing Programme for Hydrogen Tolerance Tests of Domestic and Commercial Natural Gas Appliances
Jan 2021
Publication
The THyGA project (‘Testing Hydrogen admixture for Gas Applications’) focusses on technical aspects and the regulatory framework concerning the potential operation of domestic and commercial end-user appliances with hydrogen / natural gas blends.<br/>The core of the project is a broad experimental campaign with the aim to conduct up to 100 hydrogen tolerance tests. In addition the technical status quo and present knowledge about hydrogen impact on domestic and commercial appliances are assessed and potential future developments of rules and standards are discussed. Also mitigation strategies for coping with high levels of hydrogen admixture will be developed. By this broad approach the project aims at investigating which levels of hydrogen blending impact the various appliance technologies and to which extent in order to identify the regime in which a safe efficient and low-polluting operation is possible.<br/>The series of public reports by the THyGA project starts with several publications from work package 2 which sets the basis for the upcoming results and discussion of the experimental campaign as well as mitigation and standardisation topics.<br/>This report D2.5 completes the series of public reports from work package 2. It explains the steps of development of the test programme for gas-fired appliance tests with hydrogen admixture and especially describes the exchange between the THyGA partners and the external stakeholders.<br/>The report also explains the process of acquisition of appliances to test and method of selecting appliances.
NanoSIMS Analysis of Hydrogen and Deuterium in Metallic Alloys: Artefacts and Best Practice
Apr 2021
Publication
Hydrogen embrittlement can cause catastrophic failure of high strength alloys yet determining localised hydrogen in the microstructure is analytically challenging. NanoSIMS is one of the few techniques that can map hydrogen and deuterium in metal samples at microstructurally relevant length scales. Therefore it is essential to understand the artefacts and determine the optimum methodology for its reliable detection. An experimental methodology/protocol for NanoSIMS analysis of deuterium (as a proxy for hydrogen) has been established uncovering unreported artefacts and a new approach is presented to minimise these artefacts in mapping hydrogen and deuterium in alloys. This method was used to map deuterium distributions in electrochemically charged austenitic stainless steel and precipitation hardened nickel-based alloys. Residual deuterium contamination was detected in the analysis chamber as a result of deuterium outgassing from the samples and the impact of this deuterium contamination was assessed by a series of NanoSIMS experiments. A new analysis protocol was developed that involves mapping deuterium in the passive oxide layer thus mitigating beam damage effects that may prevent the detection of localised deuterium signals when the surface is highly deuterated.
Hydrogen Mobility Europe (H2ME): Vehicle and Hydrogen Refuelling Station Deployment Results
May 2018
Publication
Hydrogen Mobility Europe (H2ME 2015–2022) is the largest European Fuel Cells and Hydrogen Joint Undertaking (EU FCH JU)-funded hydrogen light vehicle and infrastructure demonstration. Up until April 2017 the 40 Daimler passenger car fuel cell electric vehicles (FCEVs) and 62 Symbio Fuel Cell-Range Extended Electric Vans (FC-REEV)-vans deployed by the project drove 625300 km and consumed a total of 7900 kg of hydrogen with no safety incidents. During its first year of operation (to April 2017) the NEL Hydrogen Fueling HRS (hydrogen refuelling station) in Kolding Denmark dispensed 900 kg of hydrogen and demonstrated excellent reliability (98.2% availability) with no safety incidents. The average hydrogen refuelling time for passenger cars is comparable to that for conventional vehicles (2–3 min).
Differentiating Gas Leaks from Normal Appliance Use
Jun 2021
Publication
DNV has carried out an investigation into potential uses for smart gas meter data as part of Phase 1 of the Modernising Energy Data Applications competition as funded by UK Research & Innovation. In particular a series of calculations have been carried out to investigate the possibility of differentiating accidental gas leaks from normal appliance use in domestic properties. This is primarily with the aim of preventing explosions but the detection of leaks also has environmental and financial benefits.
Three gases have been considered in this study:
An examination of detailed historical incident information suggests that the explosions that lead to fatalities or significant damage to houses are typically of the type that would be more likely to be detected and prevented. It is estimated that between 25% and 75% of the more severe explosions could be prevented depending on which potential improvements are implemented.
Based on the conservative estimates of explosion prevention a cost benefit analysis suggests that it is justifiable to spend between around £1 and £10 per meter installed to implement the proposed technology. This is based purely on lives saved and does not take account of other benefits.
Three gases have been considered in this study:
- A representative UK natural gas composition.
- A blend of 80% natural gas and 20% hydrogen.
- Pure hydrogen.
- Small holes of up to 1 mm rarely reach flammable gas/air concentrations for any gas except under the most unfavourable conditions such as small volumes combined with low ventilation rates. These releases would likely be detected within 6 to 12 hours.
- Medium holes between 1 mm and 6 mm give outflow rates equivalent to a moderate to high level of gas use by appliances. The ability to detect these leaks is highly dependent on the hole size the time at which the leak begins and the normal gas use profile in the building. The larger leaks in this category would be detected within 30 to 60 minutes while the smaller leaks could take several hours to be clearly differentiated from appliance use. This is quick enough to prevent some explosions.
- Large holes of over 6 mm give leak rates greater than any gas use by appliances. These releases rapidly reach a flammable gas/air mixture in most cases but would typically be detected within the first 30-minute meter output period. Again some explosions could be prevented in this timescale.
An examination of detailed historical incident information suggests that the explosions that lead to fatalities or significant damage to houses are typically of the type that would be more likely to be detected and prevented. It is estimated that between 25% and 75% of the more severe explosions could be prevented depending on which potential improvements are implemented.
Based on the conservative estimates of explosion prevention a cost benefit analysis suggests that it is justifiable to spend between around £1 and £10 per meter installed to implement the proposed technology. This is based purely on lives saved and does not take account of other benefits.
Methane Emissions from Natural Gas and LNG Imports: An Increasingly Urgent Issue for the Future of Gas in Europe
Nov 2020
Publication
Pressure is mounting on the natural gas and LNG community to reduce methane emissions and this is most urgent in EU countries following the adoption of much tougher greenhouse gas reduction targets of 2030 and the publication of the European Commission’s Methane Strategy. With rapidly declining indigenous EU production and therefore rising import dependence there are increasing calls for emissions from imported pipeline gas and LNG to be quantified and based on actual measurements as opposed to standard emission factors. The Methane Strategy promises to be a significant milestone in that process. Companies which are supplying (or intending to supply) natural gas to the EU – the largest global import market for pipeline gas and a very significant market for LNG – would be well advised to pay close attention to how the regulation of methane emissions is unfolding and to make an immediate and positive response. Failure to do so could accelerate the demise of natural gas in European energy balances faster than would otherwise have been the case and shorten the time available for transition to decarbonised gases – specifically hydrogen – using existing natural gas infrastructure.<br/>This EU initiative will (and arguably already has) attracted attention from non-EU governments and companies involved in global gas and LNG trade. We have already seen deliveries of `carbon neutral’ LNG cargos to Asia as well as a long-term LNG contract in which the greenhouse gas content of cargos will be measured reported and verified (MRV) according to an agreed methodology. Natural gas and LNG exports if based on these standards or those set out in the EU Methane Strategy may be able to command premium prices from buyers eager to demonstrate their own GHG reduction credentials to governments customers and civil society.
Which way to Net Zero? A Comparative Analysis of Seven UK 2050 Decarbonisation Pathways
Dec 2021
Publication
Since the UK’s Net Zero greenhouse gas emissions target was set in 2019 organisations across the energy systems community have released pathways on how we might get there – which end-use technologies are deployed across each sector of demand how our fossil fuel-based energy supply would be transferred to low carbon vectors and to what extent society must change the way it demands energy services. This paper presents a comparative analysis between seven published Net Zero pathways for the UK energy system collected from Energy Systems Catapult National Grid ESO Centre for Alternative Technology and the Climate Change Committee. The key findings reported are that (i) pathways that rely on less stringent behavioural changes require more ambitious technology development (and vice versa); (ii) electricity generation will increase by 51-160% to facilitate large-scale fuel-switching in heating and transport the vast majority of which is likely to be generated from variable renewable sources; (iii) hydrogen is an important energy vector in meeting Net Zero for all pathways providing 100-591 TWh annually by 2050 though the growth in demand is heavily dependent on the extent to which it is used in supplying heating and transport demand. This paper also presents a re-visited analysis of the potential renewable electricity generation resource in the UK. It was found that the resource for renewable electricity generation outstrips the UK’s projected 2050 electricity demand by a factor 12-20 depending on the pathway. As made clear in all seven pathways large-scale deployment of flexibility and storage is required to match this abundant resource to our energy demand.
No more items...