Transmission, Distribution & Storage

This study analyzes the factors leading to the deployment of Power-to-Hydrogen (PtH₂) within the optimal design of district-scale Multi-Energy Systems (MES). To this end we utilize an optimization framework based on a mixed integer linear program that selects sizes and operates technologies in the MES to satisfy electric and thermal demands while minimizing annual costs and CO₂ emissions. We conduct a comprehensive uncertainty analysis that encompasses the entire set of technology (e.g. cost efficiency lifetime) and context (e.g. economic policy grid carbon footprint) input parameters as well as various climate-referenced districts (e.g. environmental data and energy demands) at a European-scope.

Minimum-emissions MES with large amounts of renewable energy generation and high ratios of seasonal thermal-to-electrical demand optimally achieve zero operational CO₂ emissions by utilizing PtH₂ seasonally to offset the long-term mismatch between renewable generation and energy demand. PtH₂ is only used to abate the last 5–10% emissions and it is installed along with a large battery capacity to maximize renewable self-consumption and completely electrify thermal demand with heat pumps and fuel cells. However this incurs additional cost. Additionally we show that ‘traditional’ MES comprised of renewables and short-term energy storage are able to decrease emissions by 90% with manageable cost increases.

The impact of uncertainty on the optimal system design reveals that the most influential parameter for PtH2 implementation is (1) heat pump efficiency as it is the main competitor in providing renewable-powered heat in winter. Further battery (2) capital cost and (3) lifetime prove to be significant as the competing electrical energy storage technology. In the face of policy uncertainties a CO₂ tax shows large potential to reduce emissions in district MES without cost implications. The results illustrate the importance of capturing the dynamics and uncertainties of short- and long-term energy storage technologies for assessing cost and CO₂ emissions in optimal MES designs over districts with different geographical scopes.

The rise in intermittent renewable electricity production presents a global requirement for energy storage. Biological hydrogen methanation (BHM) facilitates wind and solar energy through the storage of otherwise curtailed or constrained electricity in the form of the gaseous energy vector biomethane. Biological methanation in the circular economy involves the reaction of hydrogen – produced during electrolysis – with carbon dioxide in biogas to produce methane (4H2 + CO2 = CH4 + 2H2) typically increasing the methane output of the biogas system by 70%. In this paper several BHM systems were researched and a compilation of such systems was synthesized facilitating comparison of key parameters such as methane evolution rate (MER) and retention time. Increased retention times were suggested to be related to less efficient systems with long travel paths for gases through reactors. A significant lack of information on gas-liquid transfer co-efficient was identified

Liquid hydrogen is the main fuel of large-scale low-temperature heavy-duty rockets and has become the key direction of energy development in China in recent years. As an important application carrier in the large-scale storage and transportation of liquid hydrogen liquid hydrogen cryogenic storage and transportation containers are the key equipment related to the national defense security of China’s aerospace and energy fields. Due to the low temperature of liquid hydrogen (20 K) special requirements have been put forward for the selection of materials for storage and transportation containers including the adaptability of materials in a liquid hydrogen environment hydrogen embrittlement characteristics mechanical properties and thermophysical properties of liquid hydrogen temperature which can all affect the safe and reliable design of storage and transportation containers. Therefore it is of great practical significance to systematically master the types and properties of cryogenic materials for the development of liquid hydrogen storage and transportation containers. With the wide application of liquid hydrogen in different occasions the requirements for storage and transportation container materials are not the same. In this paper the types and applications of cryogenic materials commonly used in liquid hydrogen storage and transportation containers are reviewed. The effects of low-temperature on the mechanical properties of different materials are introduced. The research progress of cryogenic materials and low-temperature performance data of materials is introduced. The shortcomings in the research and application of cryogenic materials for liquid hydrogen storage and transportation containers are summarized to provide guidance for the future development of container materials. Among them stainless steel is the most widely used cryogenic material for liquid hydrogen storage and transportation vessel but different grades of stainless steel also have different applications which usually need to be comprehensively considered in combination with its low temperature performance corrosion resistance welding performance and other aspects. However with the increasing demand for space liquid hydrogen storage and transportation the research on high specific strength cryogenic materials such as aluminum alloy titanium alloy or composite materials is also developing. Aluminum alloy liquid hydrogen storage and transportation containers are widely used in the space field while composite materials have significant advantages in being lightweight. Hydrogen permeation is the key bottleneck of composite storage and transportation containers. At present there are still many technical problems that have not been solved.

Climate change is one of the major problems that people face in this century with fossil fuel combustion engines being huge contributors. Currently the battery powered electric vehicle is considered the predecessor while hydrogen vehicles only have an insignificant market share. To evaluate if this is justified different hydrogen power train technologies are analyzed and compared to the battery powered electric vehicle. Even though most research focuses on the hydrogen fuel cells it is shown that despite the lower efficiency the often-neglected hydrogen combustion engine could be the right solution for transitioning away from fossil fuels. This is mainly due to the lower costs and possibility of the use of existing manufacturing infrastructure. To achieve a similar level of refueling comfort as with the battery powered electric vehicle the economic and technological aspects of the local small-scale hydrogen production are being investigated. Due to the low efficiency and high prices for the required components this domestically produced hydrogen cannot compete with hydrogen produced from fossil fuels on a larger scale

Metal alloys have become a ubiquitous choice as catalysts for electrochemical hydrogen evolution in alkaline media. However scarce and expensive Pt remains the key electrocatalyst in acidic electrolytes making the search for earth-abundant and cheaper alternatives important. Herein we present a facile and efficient synthetic route towards polycrystalline Co₃Mo and Co₇Mo₆ alloys. The single-phased nature of the alloys is confirmed by X-ray diffraction and electron microscopy. When electrochemically tested they achieve competitively low overpotentials of 115 mV (Co₃Mo ) and 160 mV (Co₇Mo₆ ) at 10 mA cm⁻² in 0.5 M H₂SO₄ and 120 mV (Co₃Mo ) and 160 mV (Co₇Mo₆ ) at 10 mA cm⁻² in 1 M KOH. Both alloys outperform Co and Mo metals which showed significantly higher overpotentials and lower current densities when tested under identical conditions confirming the synergistic effect of the alloying. However the low overpotential in Co₃Mo comes at the price of stability. It rapidly becomes inactive when tested under applied potential bias. On the other hand Co7Mo6 retains the current density over time without evidence of current decay. The findings demonstrate that even in free-standing form and without nanostructuring polycrystalline bimetallic electrocatalysts could challenge the dominance of Pt in acidic media if ways for improving their stability were found.

This review describes recent research in the development of tank systems based on complex metal hydrides for thermolysis and hydrolysis. Commercial applications using complex metal hydrides are limited especially for thermolysis-based systems where so far only demonstration projects have been performed. Hydrolysis-based systems find their way in space naval military and defense applications due to their compatibility with proton exchange membrane (PEM) fuel cells. Tank design modeling and development for thermolysis and hydrolysis systems as well as commercial applications of hydrolysis systems are described in more detail in this review. For thermolysis mostly sodium aluminum hydride containing tanks were developed and only a few examples with nitrides ammonia borane and alane. For hydrolysis sodium borohydride was the preferred material whereas ammonia borane found less popularity. Recycling of the sodium borohydride spent fuel remains an important part for their commercial viability.

This paper reviews state-of-the-art developments in hydrogen energy systems which integrate fuel cells with metal hydride-based hydrogen storage. The 187 reference papers included in this review provide an overview of all major publications in the field as well as recent work by several of the authors of the review. The review contains four parts. The first part gives an overview of the existing types of fuel cells and outlines the potential of using metal hydride stores as a source of hydrogen fuel. The second part of the review considers the suitability and optimisation of different metal hydrides based on their energy efficient thermal integration with fuel cells. The performances of metal hydrides are considered from the viewpoint of the reversible heat driven interaction of the metal hydrides with gaseous H2. Efficiencies of hydrogen and heat exchange in hydrogen stores to control H2 charge/discharge flow rates are the focus of the third section of the review and are considered together with metal hydride – fuel cell system integration issues and the corresponding engineering solutions. Finally the last section of the review describes specific hydrogen-fuelled systems presented in the available reference data.

An all-weather energy management scheme for island DC microgrid based on hydrogen energy storage is proposed. A dynamic model of a large-scale wind–solar hybrid hydrogen-generation power generation system was established using a quasi-proportional resonance (QPR). We used the distributed Nautilus vertical axis wind power generation system as the main output of the system and it used the photovoltaic and hydrogen energy storage systems as alternative energy sources. Based on meeting the load power requirements and controlling the bus voltage stability we can convert the excess energy of the microgrid to hydrogen energy. With a shortage of load power we can convert the stored hydrogen into electrical energy for the load. Based on the ANSYS FLUENT software platform the feasibility and superiority over large-scale distributed Nautilus vertical axis wind power generation systems are verified. Through the MATLAB/Simulink software platform the effectiveness of the energy management method is verified. The results show that the large-scale distributed Nautilus vertical axis wind power generation system runs well in the energy system produces stable torque produces energy better than other types of wind turbines and has less impact on the power grid. The energy management method can ensure the normal operation of the system 24 h a day under the premise of maintaining the stable operation of the electric hydrogen system without providing external energy.

By using a newly constructed bench-scale hydrogen energy system with renewable energy ‘Pure Hydrogen Energy System’ the present study demonstrates the operations of a metal hydride (MH) tank for hydrogen compression as implemented through the use solar thermal energy. Solar thermal energy is used to generate hot water as a heat source of the MH tank. Thus 70 kg of LaNi5 one of the most typical alloys used for hydrogen storage was placed in the MH tank. We present low and high hydrogen flow rate operations. Then the operations under winter conditions are discussed along with numerical simulations conducted from the thermal point of view. Results show that a large amount of heat (>100 MJ) is generated and the MH hydrogen compression is available.

Electrochemical energy storage is a key enabling technology for further integration of renewables sources. Redox flow batteries(RFBs) are promising candidates for such applications as a result of their durability efficiency and fast response. However deployment of existing RFBs is hindered by the relatively high cost of the (typically vanadium-based) electrolyte. Manganese is an earth-abundant and inexpensive element that is widely used in disposable alkaline batteries. However it has hitherto been little explored for RFBs due to the instability of Mn(III) leading to precipitation of MnO2 via a disproportionation reaction. Here we show that by combining the facile hydrogen negative electrode reaction with electrolytes that suppress Mn(III) disproportionation it is possible to construct a hydrogen/manganese hybrid RFB with high round trip energy efficiency (82%) and high power and energy density (1410 mW cm−2 33 Wh l−1 ) at an estimated 70% cost reduction compared to vanadium redox flow batteries.