Skip to content
1900

The Use of Strontium Ferrite in Chemical Looping Systems

Abstract

This work reports a detailed chemical looping investigation of strontium ferrite (SrFeO3−δ), a material with the perovskite structure type able to donate oxygen and stay in a nonstoichiometric form over a broad range of oxygen partial pressures, starting at temperatures as low as 250°C (reduction in CO, measured in TGA). SrFeO3−δ is an economically attractive, simple, but remarkably stable material that can withstand repeated phase transitions during redox cycling. Mechanical mixing and calcination of iron oxide and strontium carbonate was evaluated as an effective way to obtain pure SrFeO3−δ. In–situ XRD was performed to analyse structure transformations during reduction and reoxidation. Our work reports that much deeper reduction, from SrFeO3−δ to SrO and Fe, is reversible and results in oxygen release at a chemical potential suitable for hydrogen production. Thermogravimetric experiments with different gas compositions were applied to characterize the material and evaluate its available oxygen capacity. In both TGA and in-situ XRD experiments the material was reduced below δ=0.5 followed by reoxidation either with CO2 or air, to study phase segregation and reversibility of crystal structure transitions. As revealed by in-situ XRD, even deeply reduced material regenerates at 900°C to SrFeO3−δ with a cubic structure. To investigate the catalytic behaviour of SrFeO3−δ in methane combustion, experiments were performed in a fluidized bed rig. These showed SrFeO3−δ donates Ointo the gas phase but also assists with CH4 combustion by supplying lattice oxygen. To test the material for combustion and hydrogen production, long cycling experiments in a fluidized bed rig were also performed. SrFeO3−δ showed stability over 30 redox cycles, both in experiments with a 2-step oxidation performed in CO2 followed by air, as well as a single step oxidation in CO2 alone. Finally, the influence of CO/CO2 mixtures on material performance was tested; a fast and deep reduction in elevated pCO2 makes the material susceptible to carbonation, but the process can be reversed by increasing the temperature or lowering pCO2.

Related subjects: Production & Supply Chain
Countries: United Kingdom
Loading

Article metrics loading...

/content/journal69
2020-05-03
2024-04-19
http://instance.metastore.ingenta.com/content/journal69
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error