United States

As the world looks to implement the Energy Transition repurposing existing fossil fuel infrastructure to produce or distribute “clean” energy will be critical. The most promising is using natural gas pipelines for moving hydrogen. This is the cheapest and fastest method of transport and reducing the cost of transporting hydrogen is a key step in making it economically viable. However while there are technical challenges the greater challenge is in the legal arena. This paper seeks to outline the numerous legal — treaty statutory and contractual — and regulatory obstacles to repurposing natural gas pipelines for hydrogen transport. Gas pipelines exist in a complex microclimate of international public and private law and domestic law and contracts. Ownership is often layered and tangled; financing doubly so; and myriad state interests compound the private interests including national security concerns energy supply imperatives and geopolitical balance. State aid — investment subsidies and tax breaks — may encumber the project with additional legal obligations. And the contracts that control the development of a pipeline project may inject further legal complexity such as dispute mediation procedures and fora and applicable law. This paper seeks to map all the likely areas of future conflict or difficulty so that work on developing the requisite legal regime and remedies to permit use of natural gas pipelines for hydrogen transport can begin now. For policy and lawmakers as well as the private sector evaluating these known unknowns is a good starting point for reconsidering legislation regulation contracts and project risk in preparation for the future probability of hydrogen pipelines.

Fission Batteries (FBs) are nuclear reactors for customers with heat demands less than 250 MWt—replacing oil and natural gas in a low-carbon economy. Individual FBs would have outputs between 5 and 30 MWt. The small FB size has two major benefits: (1) the possibility of mass production and (2) ease of transport and leasing with return of used FBs to factory for refurbishing and reuse. Comparatively these two features are lacking in larger conventional reactors. Larger reactors are not transportable and thus can’t obtain the manufacturing economics possible with mass production or the operational advantages of returning the FB to the factory after use. Leasing places the regulatory maintenance and fuel-cycle burden on the leasing company that is minimized by large-fleet operations of identical units. The markets and economic requirements for FBs were examined. The primary existing markets are industrial biofuels off-grid electricity and container ships. Two major future markets were identified—advanced biofuels and hydrogen. In a low-carbon world the competitive price range for heat is $20–50/MWh ($6–15/million BTU) and $70–115/MWh for non-grid electricity. The primary competition in these sectors is likely to be biofuels and hydrogen produced using alternative energy sources—grid electricity is non-competitive. Larger users of energy have alternative low-carbon energy choices including modular nuclear reactors and fossil fuels with carbon capture and sequestration (CCS).

Growth in the hydrogen and fuel cell industries will lead to vast new employment opportunities and these will be created in a wide variety of industries skills tasks and earnings. Many of these jobs do not currently exist and do not have occupational titles defined in official classifications. In addition many of these jobs require different skills and education than current jobs and training requirements must be assessed so that this rapidly growing part of the economy has a sufficient supply of trained and qualified workers. We discuss the current hydrogen economy and technologies. We then identify by occupational titles the new jobs that will be created in the expanding hydrogen/fuel cell economy estimate the average US salary for each job identify the minimum educational attainment required to gain entry into that occupation and specify the recommended university degree for the advanced educational requirements. We provide recommendations for further research.

As a promising substitute for fossil fuels hydrogen has emerged as a clean and renewable energy. A key challenge is the efcient production of hydrogen to meet the commercial-scale demand of hydrogen. Water splitting electrolysis is a promising pathway to achieve the efcient hydrogen production in terms of energy conversion and storage in which catalysis or electrocatalysis plays a critical role. The development of active stable and low-cost catalysts or electrocatalysts is an essential prerequisite for achieving the desired electrocatalytic hydrogen production from water splitting for practical use which constitutes the central focus of this review. It will start with an introduction of the water splitting performance evaluation of various electrocatalysts in terms of activity stability and efciency. This will be followed by outlining current knowledge on the two half-cell reactions hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in terms of reaction mechanisms in alkaline and acidic media. Recent advances in the design and preparation of nanostructured noble-metal and non-noble metal-based electrocatalysts will be dis‑ cussed. New strategies and insights in exploring the synergistic structure morphology composition and active sites of the nanostructured electrocatalysts for increasing the electrocatalytic activity and stability in HER and OER will be highlighted. Finally future challenges and perspectives in the design of active and robust electrocatalysts for HER and OER towards efcient production of hydrogen from water splitting electrolysis will also be outlined.

Hydrogen could be used in many hard-to-decarbonize sectors. Foremost amongst them is the steel manufacturing industry. On this episode of EAH we speak with Dr. Martin Pei Executive Vice President and CTO of SSAB and the first Chairman of the Board for Hybrit Development AB. SSAB is a global steel company with a leading position in high-strength steels and related services. Together with their partners LKAB and Vattenfall SSAB are making a unique joint effort to change the Swedish iron and steel industry fundamentally. With HYBRIT technology SSAB aims to be the first steel company in the world to bring fossil-free steel to the market already in 2026 and largely eliminate carbon dioxide emissions from the company's own operations as soon as 2030.

The podcast can be found on their website.

H2 Green Steel was founded in 2020 with the aim to build a large-scale green steel production in northern Sweden. H2 Green Steel is on a mission to undertake the global steel industry’s greatest ever technological shift. By 2024 H2 Green Steel will be in production at their Boden site and by 2030 will produce five million tonnes of green steel annually. Vargas co-founder and a major shareholder in Northvolt is also H2 Green Steel’s founder and largest shareholder. The EAH team speaks with Kajsa Ryttberg-Wallgren head of the Hydrogen Business Unit at H2 Green Steel.

The podcast can be found on their website

For renewable hydrogen to be a significant part of the future decarbonized energy and transportation sectors a rapid and massive build-out of hydrogen production facilities will be needed. This paper describes a geospatial modeling approach to identifying the optimal locations for renewable hydrogen fuel production throughout the state of California based on least-cost generation and transport. This is accomplished by (1) estimating and projecting California renewable hydrogen demand scenarios through the year 2050 (2) identifying feedstock locations (3) excluding areas not suitable for development and (4) selecting optimal site locations using commercial geospatial modeling software. The findings indicate that there is a need for hundreds of new renewable hydrogen production facilities in the decades preceding the year 2050. In selecting sites for development feedstock availability by technology type is the driving factor."

The higher rate of component failure and downtime during initial operation in hydrogen stations is not well understood. The National Renewable Energy Laboratory (NREL) has been collecting failed components from retail and research hydrogen fuelling stations in California and Colorado and analyzing them using an optical zoom and scanning electron microscope. The results show stainless steel metal particulate contamination. While it is difficult to definitively know the origin of the contaminants a possible source of the metal particulates is improper tube cleaning practices. To understand the impact of different cleaning procedures NREL performed an experiment to quantify the particulates introduced from newly cut tubes. The process of tube cutting threading and bevelling which is performed most often during station fabrication is shown to introduce metal contaminants and thus is an area that could benefit from improved cleaning practices. This paper shows how these particulates can be reduced which could prevent station downtime and costly repair. These results are from the initial phase of a project in which NREL intends to further investigate the sources of particulate contamination in hydrogen stations.

The permanent introduction of green hydrogen into the energy economy would require that a discriminating selection be made of its use in the sectors where its value is optimal in terms of relative cost and life cycle reduction in carbon dioxide emissions. Consequently hydrogen can be used as an energy storage medium when intermittent wind and solar power exceed certain penetration in the grid likely above 40% and in road transportation right away to begin displacing gasoline and diesel fuels. To this end the proposed approach is to utilize current technologies represented by PHEV in light-duty and HEV in heavy-duty vehicles where a high-performance internal combustion engine is used with a fuel comprised of 15–20% green hydrogen and 85–89% green methane depending on vehicle type. This fuel designated as RHYME takes advantage of the best attributes of hydrogen and methane results in lower life cycle carbon dioxide emissions than BEVs or FCEVs and offers a cost-effective and pragmatic approach both locally as well as globally in establishing hydrogen as part of the energy economy over the next ten to thirty years.

The European Union set a 2050 decarbonization target in the Paris Agreement to reduce carbon emissions by 90–95% relative to 1990 emission levels. The path toward achieving those deep decarbonization targets can take various shapes but will surely include a portfolio of economy-wide low-carbon energy technologies/options. The growth of the intermittent renewable power sources in the grid mix has helped reduce the carbon footprint of the electric power sector. Under the need for decarbonizing the electric power sector we simulated a low-carbon power system. We investigated the role of hydrogen for future electric power systems under current cost projections. The model optimizes the power generation mix economically for a given carbon constraint. The generation mix consists of intermittent renewable power sources (solar and wind) and dispatchable gas turbine and combined cycle units fuelled by natural gas with carbon capture and sequestration as well as hydrogen. We created several scenarios with battery storage options pumped hydro hydrogen storage and demand-side response (DSR). The results show that energy storage replaces power generation and pumped hydro entirely replaces battery storage under given conditions. The availability of pumped hydro storage and demand-side response reduced the total cost as well as the combination of solar photovoltaic and pumped hydro storage. Demand-side response reduces relatively costly dispatchable power generation reduces annual power generation halves the shadow carbon price and is a viable alternative to energy storage. The carbon constrain defines the generation mix and initializes the integration of hydrogen (H₂). Although the model rates power to gas with hydrogen as not economically viable in this power system under the given conditions and assumptions hydrogen is important for hard-to-abate sectors and enables sector coupling in a real energy system. This study discusses the potential for hydrogen beyond this model approach and shows the differences between cost optimization models and real-world feasibility.