United States

Proton exchange membrane electrolyzers are an attractive technology for hydrogen production due to their high efficiency low maintenance cost and scalability. To receive these benefits however electrolyzers require high power reliability and have relatively high demand. Due to their intermittent nature integrating renewable energy sources like solar and wind has traditionally resulted in a supply too sporadic to consistently power a proton exchange membrane electrolyzer. This study develops an electrolyzer model operating with renewable energy sources at a highly instrumented university site. The simulation uses dynamic models of photovoltaic solar and wind systems to develop models capable of responding to changing climatic and seasonal conditions. The aim therefore is to observe the feasibility of operating a proton exchange membrane system fuel cell yearround at optimal efficiency. To address the problem of feasibility with dynamic renewable generation a case study demonstrates the proposed energy management system. A site with a river onsite is chosen to ensure sufficient wind resources. Aside from assessing the feasibility of pairing renewable generation with proton exchange membrane systems this project shows a reduction in the intermittency plaguing previous designs. Finally the study quantifies the performance and effectiveness of the PEM energy management system design. Overall this study highlights the potential of proton exchange membrane electrolysis as a critical technology for sustainable hydrogen production and the importance of modeling and simulation techniques in achieving its full potential.

Ammonia a molecule that is gaining more interest as a fueling vector has been considered as a candidate to power transport produce energy and support heating applications for decades. However the particular characteristics of the molecule always made it a chemical with low if any benefit once compared to conventional fossil fuels. Still the current need to decarbonize our economy makes the search of new methods crucial to use chemicals such as ammonia that can be produced and employed without incurring in the emission of carbon oxides. Therefore current efforts in this field are leading scientists industries and governments to seriously invest efforts in the development of holistic solutions capable of making ammonia a viable fuel for the transition toward a clean future. On that basis this review has approached the subject gathering inputs from scientists actively working on the topic. The review starts from the importance of ammonia as an energy vector moving through all of the steps in the production distribution utilization safety legal considerations and economic aspects of the use of such a molecule to support the future energy mix. Fundamentals of combustion and practical cases for the recovery of energy of ammonia are also addressed thus providing a complete view of what potentially could become a vector of crucial importance to the mitigation of carbon emissions. Different from other works this review seeks to provide a holistic perspective of ammonia as a chemical that presents benefits and constraints for storing energy from sustainable sources. State-of-the-art knowledge provided by academics actively engaged with the topic at various fronts also enables a clear vision of the progress in each of the branches of ammonia as an energy carrier. Further the fundamental boundaries of the use of the molecule are expanded to real technical issues for all potential technologies capable of using it for energy purposes legal barriers that will be faced to achieve its deployment safety and environmental considerations that impose a critical aspect for acceptance and wellbeing and economic implications for the use of ammonia across all aspects approached for the production and implementation of this chemical as a fueling source. Herein this work sets the principles research practicalities and future views of a transition toward a future where ammonia will be a major energy player.

Hydrogen delivery at elevated pressures is often required for fuel cell and combustion applications to improve volumetric energy density. Catalytic membrane reformers (CMRs) integrate hydrogen production and purification from reforming liquid hydrogen carriers such as ammonia enabling direct recovery of pressurized purified hydrogen. In this study high-pressure ammonia is supplied to a catalytic membrane reformer (CMR) to enhance both performance and hydrogen recovery pressures. Increasing operating pressure in the CMR resulted in nearly doubling the hydrogen flux from 17.2 to 34 sccm cm− 2 compared to our previous work. However as the recovery pressure of the permeate increased the performance notably decreased with hydrogen recovery dropping from 98 % at atmospheric pressure to 44 % at 10 bar. Nevertheless the system demonstrated rates of ammonia conversion hydrogen flux and hydrogen recovery comparable to leading literature reports when supplying ammonia at 20 bar and recovering the permeate up to 10 bar. Additionally by using ammonia as both a feed and sweep gas we demonstrate the direct production of high-pressure NH3/H2 fuel blends including a 70:30 mixture representative of natural gas without loss in CMR performance. These results highlight the potential of CMR technology to reduce hydrogen compression costs and enable on-demand generation of ammonia-derived fuel blends.

Historically it has been a challenge to simulate the experimentally observed cellular structures and marginal behavior of multidimensional hydrogen-oxygen detonations in the presence of losses even with detailed chemistry models. Very recently a quasi-two-dimensional inviscid approach was pursued where losses due to viscous boundary layers were modeled by the inclusion of an equivalent mass divergence in the lateral direction using Fay’s source term formulation with Mirels’ compressible boundary layer solutions. The same approach was used for this study along with the inclusion of thermally perfect detailed chemistry in order to capture the correct ignition sensitivity of the gas to dynamic changes in the thermodynamic state behind the detonation front. In addition the strength of transverse waves and their impact on the detonation front was investigated. Here the detailed San Diego mechanism was applied and it has been found that the detonation cell sizes can be accurately predicted without the need to prescribe specific parameters for the combustion model. For marginal cases where the detonation waves approach their failure limit quasi-stable mode behavior was observed where the number of transverse waves monotonically decreased to a single strong wave over a long enough distance. The strong transverse waves were also found to be slightly weaker than the detonation front indicating that they are not overdriven in agreement with recent studies.

Russia’s invasion of Ukraine has reaffirmed the importance of scaling up renewable energy to decarbonise Europe’s economy while rapidly reducing its exposure to foreign fossil fuel suppliers. Therefore the question of sources of flexibility to support a fully decarbonised European energy system is becoming even more critical in light of a renewable-dominated energy system. We developed and used a Pan-European energy system model to systematically assess and quantify sources of flexibility to meet deep decarbonisation targets. The electricity supply sector and electricity-based end-use technologies are crucial in achieving deep decarbonisation. Other low-carbon energy sources like biomethane hydrogen synthetic e-fuels and bioenergy with carbon capture and storage will also play a role. To support a fully decarbonised European energy system by 2050 both temporal and spatial flexibility will be needed. Spatial flexibility achieved through investments in national electricity networks and cross-border interconnections is crucial to support the aggressive roll-out of variable renewable energy sources. Cross-border trade in electricity is expected to increase and in deep decarbonisation scenarios the electricity transmission capacity will be larger than that of natural gas. Hydrogen storage and green hydrogen production will play a key role in providing traditional inter-seasonal flexibility and intraday flexibility will be provided by a combination of electrical energy storage hydrogen-based storage solutions (e.g. liquid H2 and pressurised storage) and hybrid heat pumps. Hydrogen networks and storage will become more critical as we move towards the highest decarbonisation scenario. Still the need for natural gas networks and storage will decrease substantially.

The PRHYDE project (PRotocol for heavy duty HYDrogEn refueling) funded by the Clean Hydrogen partnership aims at developing recommendations for heavy-duty refueling protocols used for future standardization activities for trucks and other heavy duty transport systems applying hydrogen technologies. Development of a protocol requires a validated approach. Due to the limited time and budget the experimental data cannot cover the whole possible ranges of protocol parameters such as initial vehicle pressure and temperature ambient and precooling temperatures pressure ramp refueling time hardware specifications etc. Hence a validated numerical tool is essential for a safe and efficient protocol development. For this purpose engineering tools are used. They give good results in a very reasonable computation time of several seconds or minutes. These tools provide the heat parameters estimation in the gas (volume average temperature) and 1D temperature distribution in the tank wall. The following models were used SOFIL (Air Liquide tool) HyFill (by ENGIE) and H2Fills (open access code by NREL). The comparison of modelling results and experimental data demonstrated a good capability of codes to predict the evolution of average gas temperature in function of time. Some recommendations on model validation for the future protocol development are given.

Hydrogen fuel has shown promise as a clean alternative fuel aiding in the reduction of fossil fuel dependence within the transportation sector. However hydrogen refueling stations and infrastructure remains a barrier and are a prerequisite for consumer adoption of low-cost and low-emission fuel cell electric vehicles (FCEVs). The costs for FCEV fueling include both station capital costs and operation and maintenance (O&M) costs. Contributing to these O&M costs unscheduled maintenance is presently more costly and more frequent than for similar gasoline fueling infrastructure and is asserted to be a limiting factor in achieving FCEV customer acceptance and cost parity. Unscheduled maintenance leads to longer station downtime therefore causing an increase in missed fueling opportunities which forces customers to seek refueling at other operable stations that may be significantly farther away. This research proposes a framework for a hydrogen station prognostics health monitoring (H2S PHM) model that can minimize unexpected downtime by predicting the remaining useful life for primary hydrogen station components within the major station subsystems. The H2S PHM model is a data-driven statistical model based on O&M data collected from 34 retail hydrogen stations located in the U.S. The primary subcomponents studied are the dispenser compressor and chiller. The remaining useful life calculations are used to decide whether or not maintenance should be completed based on the prediction and expected future station use. This paper presents the background method and results for the H2S PHM model as for a means for improving station availability and customer confidence in FCEVs and hydrogen infrastructure

Safety and reliability have long been recognized as key issues for the development commercialization and implementation of new technologies and infrastructure and hydrogen systems are no exception to this rule. Reliability engineering quantitative risk assessment (QRA) and knowledge exchange each play a key role in proactive addressing safety – before problems happen – and help us learn from problems if they happen. Many international research activities are focusing on both reliability and risk assessment for hydrogen systems. However the element of knowledge exchange is sometimes less visible. To support international collaboration and knowledge exchange the International Energy Agency (IEA) convened a new Technology Collaboration Program “Task 43: Safety and Regulatory Aspects of Emerging Large Scale Hydrogen Energy Applications” started in June 2022. Within Task 43 Subtask E focuses on Hydrogen Systems Safety. This paper discusses the structure of the Hydrogen Systems Safety subtask and the aligned activities and introduces opportunities for future work.

Social risk is a comprehensive concept that considers not only internal/external physical risks but also risks (which are multiple varied and diverse) associated with social activity. It should be considered from diverse perspectives and requires a comprehensive evaluation framework that takes into account the synergistic impact of each element on others rather than evaluating each risk individually. Social risk assessment is an approach that is not limited to internal system risk from an engineering perspective but also considers the stakeholders development stage and societal readiness and resilience to change. This study aimed to introduce a social risk approach to assess the public safety of large-scale hydrogen systems. Guidelines for comprehensive social risk assessment were developed to conduct appropriate risk assessments for advanced science and technology activities with high uncertainties to predict major impacts on society before an accident occurs and to take measures to mitigate the damage and to ensure good governance are in place to facilitate emergency response and recovery in addition to preventive measures. In a case study this approach was applied to a hydrogen refueling station in Japan and risk-based multidisciplinary approaches were introduced. These approaches can be an effective supporting tool for social implementation with respect to large-scale hydrogen systems such as liquefied hydrogen storage tanks. The guidelines for social risk assessment of large-scale hydrogen systems are under the International Energy Agency Technology Collaboration Program Hydrogen Safety Task 43. This study presents potential case studies of social risk assessment for large-scale hydrogen systems for future.

The central role of hydrogen in the EU’s decarbonization strategy has increased the importance of critical raw materials. To address this the EU has taken legislative steps including the 2023 Critical Raw Materials Act (CRMA) to ensure a stable supply. Using a leader–follower Stackelberg game framework this study analyzes CRM market dynamics integrating CRMA compliance through rules on sourcing and stockpiling value chain resilience via the inclusion of supply diversification strategies and geopolitical influences by modeling exporter behaviors and trade dependencies. Results highlight the potential for strategic behavior by major exporters stressing the benefits of diversifying export sources and maintaining strategic stockpiles to stabilize supply. The findings provide insights into the EU’s efforts to secure CRM supplies key to achieving decarbonization goals and fostering a sustainable energy transition. Future research should explore alternative cost-reduction strategies mitigate exporter market power and evaluate the implications for pricing mechanisms market outcomes and consumer welfare