Spain

Tailpipe emissions from vehicles consist of CO2 and other greenhouse gases which con‐ tribute immensely to the rise in global temperatures. Green hydrogen produced from the gasification of biomass can reduce the amount of CO2 emissions to zero. This study aims to provide a modelling framework to optimize the production of hydrogen from biomass waste obtained from different cities for use in the road transport sector in Nigeria. A gasification model with post‐treatment shift conversion and CO2 removal by adsorption is proposed. In this study six cities are simulated based on technical and environmental considerations using the Aspen Plus software package. The results revealed that Kaduna has the highest hydrogen generation potential of 0.148 million metric tons per year which could reduce CO2 emissions to 1.60 and 1.524 million metric tons by the dis‐ placement of an equivalent volume of gasoline and diesel. This amounts to cost savings of NGN 116 and 161.8 billion for gasoline and diesel respectively. In addition the results of the sensitivity analysis revealed that the steam‐to‐biomass ratio and the temperature of gasification are positively correlated with the amount of avoided CO2 emissions while the equivalence ratio shows a negative correlation.

This work focuses on the use of solar photovoltaic energy to capture carbon dioxide by means of a combined electrolyzer–absorption system and compares operating results obtained in two cases studies (operation during one clear and one cloudy day in March) in which real integration of solar photovoltaics electrolyzer and absorption technologies is made at the bench-scale. The system is a part of a larger process (so-called EDEN⃝R Electrochemically-based Decarbonizing ENergy) which aims to regulate solar photovoltaic energy using a reversible chloralkaline electrochemical cell. Results demonstrate the feasibility of the sequestering technology which can produce chlorine and hydrogen but also the sequestration of CO2 and its transformation into a mixture of sodium chloride bicarbonate and carbonate useful as raw matter. Efficiencies over 70% for chlorine 60% for hydrogen and 90% for sodium hydroxide were obtained. The sequestration of carbon dioxide reached 24.4 mmol CO2/Ah with an average use of 1.6 mmol NaOH/mmol CO2. Important differences are found between the performance of the system in a clear and a cloudy day which point out the necessity of regulating the dosing of the electrochemically produced sodium hydroxide to optimize the sequestration of CO2.

Hydrogen has been extensively used in many industrial applications for more than 100 years including production storage transport delivery and final use. Nevertheless the goal of the hydrogen energy system implies the use of hydrogen as an energy carrier in a more wide scale and for a public not familiarised with hydrogen technologies and properties.<br/>The road to the hydrogen economy passes by the development of safe practices in the production storage distribution and use of hydrogen. These issues are essential for hydrogen insurability. We have to bear in mind that a catastrophic failure in any hydrogen project could damage the insurance public perception of hydrogen technologies at this early step of development of hydrogen infrastructures.<br/>Safety is a key issue for the development of hydrogen economy and a great international effort is being done by different stakeholders for the development of suitable codes and standards concerning safety for hydrogen technologies [1 2]. Additionally to codes and standards different studies have been done regarding safety aspects of particular hydrogen energy projects during the last years [3 4]. Most of such have been focused on hydrogen production and storage in large facilities transport delivery in hydrogen refuelling stations and utilization mainly on fuel cells for mobile and stationary applications. In comparison safety considerations for hydrogen storage in small or medium scale facilities as usual in hydrogen production plants from renewable energies have received relatively less attention.<br/>After a brief introduction to risk assessment for hydrogen facilities this paper reports an example of risk assessment of a small solar hydrogen storage system applied to the INTA Solar Hydrogen Production and Storage facility as particular case and considers a top level Preliminary Failure Modes and Effects Analysis (FMEA) for the identification of hazard associated to the specific characteristics of the facility.

The present work proposes a novel safe method for obtaining metallic hydrides. The method is called SHS (Self-Propagating High temperature synthesis). A novel high pressure gas reactor governed by an electromechanical control device has been designed and built up in order to synthesise metallic hydrides. This system is provided with a control system that allows calculating the amount of gas coming into the reaction vessel at every stage of the process. The main feature of this method is that metallic hydrides can be safely synthesised using low gas reaction pressures. In order to validate the assessing system the main kinetic regularities of SHS in Ti-H2 system were studied. In addition phase analysis (by means of X ray diffraction) as well as chemical analysis have been performed.

The paper presents the results of the CFD inter-comparison exercise SBEP-V3 performed within the activity InsHyde internal project of the HYSAFE network of excellence in the framework of evaluating the capability of various CFD tools and modelling approaches in predicting the physical phenomena associated to the short and long term mixing and distribution of hydrogen releases in confined spaces. The experiment simulated was INERIS-TEST-6C performed within the InsHyde project by INERIS consisting of a 1 g/s vertical hydrogen release for 240 s from an orifice of 20 mm diameter into a rectangular room (garage) of dimensions 3.78x7.2x2.88 m in width length and height respectively. Two small openings at the front and bottom side of the room assured constant pressure conditions. During the test hydrogen concentration time histories were measured at 12 positions in the room for a period up to 5160 s after the end of release covering both the release and the subsequent diffusion phases. The benchmark was organized in two phases. The first phase consisted of blind simulations performed prior to the execution of the tests. The second phase consisted of post calculations performed after the tests were concluded and the experimental results made available. The participation in the benchmark was high: 12 different organizations (2 non-HYSAFE partners) 10 different CFD codes and 8 different turbulence models. Large variation in predicted results was found in the first phase of the benchmark between the various modelling approaches. This was attributed mainly to differences in turbulence models and numerical accuracy options (time/space resolution and discretization schemes). During the second phase of the benchmark the variation between predicted results was reduced.

The article presents a review of the research on green hydrogen from the social sciences identifying its main lines of research its problems and the relevant challenges due to the benefits and impacts that this energy vector has on energy transitions and climate change. The review analyzes a corpus of 78 articles indexed in the Web of Science (WoS) and SCOPUS published between 1997 and 2022. The review identified three research areas related to green hydrogen and the challenges for the social sciences in the future: (a) risks socio-environmental impacts and public perception; (b) public policies and regulation and (c) social acceptance and willingness to use associated technologies. Our results show that Europe and Asia lead the research on green hydrogen from the social sciences. Also most of the works focus on the area of public policy and regulation and social acceptance. Instead the field of social perception of risk is much less developed. We found that little research from the social sciences has focused on assessments of the social and environmental impacts of hydrogen on local communities and indigenous groups as well as the participation of local authorities in rural locations. Likewise there are few integrated studies (technical and social) that would allow a better assessment of hydrogen and cleaner energy transitions. Finally the lack of familiarity with this technology in many cases constitutes a limitation when evaluating its acceptance.

Hydrogen has the potential to be used by many countries as part of decarbonising the future energy system. Hydrogen can be used as a fuel ‘vector’ to store and transport energy produced in low-carbon ways. This could be particularly important in applications such as heating and transport where other solutions for low and zero carbon emission are difficult. To enable the safe uptake of hydrogen technologies it is important to develop the international scientific evidence base on the potential risks to safety and how to control them effectively. The International Association for Hydrogen Safety (known as IA HySAFE) is leading global efforts to ensure this. HSE hosted the 2018 IA HySAFE Biennial Research Priorities Workshop. A panel of international experts presented during nine key topic sessions: (1) Industrial and National Programmes; (2) Applications; (3) Storage; (4) Accident Physics – Gas Phase; (5) Accident Physics – Liquid/ Cryogenic Behaviour; (6) Materials; (7) Mitigation Sensors Hazard Prevention and Risk Reduction; (8) Integrated Tools for Hazard and Risk Assessment; (9) General Aspects of Safety.<br/>This report gives an overview of each topic made by the session chairperson. It also gives further analysis of the totality of the evidence presented. The workshop outputs are shaping international activities on hydrogen safety. They are helping key stakeholders to identify gaps in knowledge and expertise and to understand and plan for potential safety challenges associated with the global expansion of hydrogen in the energy system.

Industrial and public interest in hydrogen technologies has risen strongly recently as hydrogen is the ideal means for medium to long term energy storage transport and usage in combination with renewable and green energy supply. In a future energy system the production storage and usage of green hydrogen is a key technology. Hydrogen is and will in future be even more used for industrial production processes as a reduction agent or for the production of synthetic hydrocarbons especially in the chemical industry and in refineries. Under certain conditions material based systems for hydrogen storage and compression offer advantages over the classical systems based on gaseous or liquid hydrogen. This includes in particular lower maintenance costs higher reliability and safety. Hydrogen storage is possible at pressures and temperatures much closer to ambient conditions. Hydrogen compression is possible without any moving parts and only by using waste heat. In this paper we summarize the newest developments of hydrogen carriers for storage and compression and in addition give an overview of the different research activities in this field.

From a permeability and selectivity perspective supported thin-film Pd–Ag membranes are the best candidates for high-purity hydrogen recovery for methane-hydrogen mixtures from the natural gas grid. However the high hydrogen flux also results in induced bulk-to-membrane mass transfer limitations (concentration polarization) especially when working at low hydrogen concentration and high pressure which further reduces the hydrogen permeance in the presence of mixtures. Additionally Pd is a precious metal and its price is lately increasing dramatically. The use of inexpensive CMSM could become a promising alternative. In this manuscript a detailed comparison between these two membrane technologies operating under the same working pressure and mixtures is presented.<br/>First the permeation properties of CMSM and Pd–Ag membranes are compared in terms of permeance and purity and subsequently making use of this experimental investigation an economic evaluation including capital and variable costs has been performed for a separation system to recover 25 kg/day of hydrogen from a methane-hydrogen mixture. To widen the perspective also a sensitivity analysis by changing the pressure difference membrane lifetime membrane support cost and cost of Pd/Ag membrane recovery has been considered. The results show that at high pressure the use of CMSM is to more economic than the Pd-based membranes at the same recovery and similar purity.

The present review provides a catalogue of relevant renewable energy (RE) technologies currently available (regarding the 2030 scope) and to be available in the transition towards 2050 for the decarbonisation of Energy Intensive Industries (EIIs). RE solutions have been classified into technologies based on the use of renewable electricity and those used to produce heat for multiple industrial processes. Electrification will be key thanks to the gradual decrease in renewable power prices and the conversion of natural-gas-dependent processes. Industrial processes that are not eligible for electrification will still need a form of renewable heat. Among them the following have been identified: concentrating solar power heat pumps and geothermal energy. These can supply a broad range of needed temperatures. Biomass will be a key element not only in the decarbonisation of conventional combustion systems but also as a biofuel feedstock. Biomethane and green hydrogen are considered essential. Biomethane can allow a straightforward transition from fossil-based natural gas to renewable gas. Green hydrogen production technologies will be required to increase their maturity and availability in Europe (EU). EIIs’ decarbonisation will occur through the progressive use of an energy mix that allows EU industrial sectors to remain competitive on a global scale. Each industrial sector will require specific renewable energy solutions especially the top greenhouse gas-emitting industries. This analysis has also been conceived as a starting point for discussions with potential decision makers to facilitate a more rapid transition of EIIs to full decarbonisation.