Applications & Pathways

As an energy-intensive sector China’s iron and steel industry is crucial for achieving “Dual Carbon” goals. This study fills the research gap in systematically comparing the synergistic effects of multiple policies by evaluating five key measures (2020–2023) in ultra-low-emission retrofits and clean energy alternatives. Using public macro-data at the national level this study quantified cumulative reductions in air pollutants (SO2 NOx PM VOCs) and CO2. A synergistic control effect coordinate system and a normalized synergistic emission reduction equivalent (APeq) model were employed. The results reveal significant differences: Sintering machine desulfurization and denitrification (SDD) showed the highest APeq but increased CO2 emissions in 2023. Dust removal equipment upgrades (DRE) and unorganized emission control (UEC) demonstrated stable co-reduction effects. While electric furnace short-process steelmaking (ES) and hydrogen metallurgy (HM) showed limited current benefits they represent crucial deep decarbonization pathways. The framework provides multi-dimensional policy insights beyond simple ranking suggesting balancing short-term pollution control with long-term transition by prioritizing clean alternatives.

Hydrogen fuel cell systems are a viable option for electrified aero engines due to their efficiency and environmental benefits. However integrating these systems presents challenges notably in terms of overall system weight and thermal management. Heat exchangers are crucial for the effective thermal management system of electric propulsion systems in commercial electrified aviation. This paper provides a comprehensive review of various heat exchanger types and evaluates their potential applications within these systems. Selection criteria are established based on the specific requirements for air and hydrogen heat exchangers in electrified aircraft. The study highlights the differences in weighting criteria for these two types of heat exchangers and applies a weighted point rating system to assess their performance. Results indicate that extended surface microchannel and printed circuit heat exchangers exhibit significant promise for aviation applications. The paper also identifies key design challenges and research needs particularly in enhancing net heat dissipation increasing compactness improving reliability and ensuring effective integration with aircraft systems.

The passive combination of fuel cells and supercapacitors possesses promising applications in the automotive industry due to its ability to decrease stack size maintain peak power capacity improve system productivity and go away with the need for additional control all without Direct current to Direct Current (DC/DC) converters. This research describes the steps to create and evaluate a fuel cell (FC) and supercapacitor (SC) passive hybrid electrical system for a 60-V lightweight vehicle. Also study offers a thorough design approach and model and experimentally to validate every passive hybrid testing station component. When both concepts are stable the voltage errors are about 2 % and 3 % respectively for fuel cells and supercapacitors. The results of the experiments provide more evidence that the passive design is effective under step loads and driving cycles. The results of the measurements match the models used to simulate the passive hybrid system if a step load voltage is used. A smaller FC stack is possible since the fuel cell controls the steady-state current. Alternatively the supercapacitors provide varying currents because of their reduced resistance. This study use a driving cycle to show that the FC stack can lower its output to 25 % of the peak power required by the load.

The inherent randomness and intermittency of offshore renewable energy sources such as wind and solar power pose significant challenges to the stable and secure operation of the power grid. These fluctuations directly affect the performance of grid-connected systems particularly in terms of harmonic distortion and load response. This paper addresses these challenges by proposing a novel harmonic control strategy and load response optimization approach. An integrated three-winding transformer filter is designed to mitigate high-frequency harmonics and a control strategy based on converter-side current feedback is implemented to enhance system stability. Furthermore a hybrid PI-VPI control scheme combined with feedback filtering is employed to improve the system’s transient recovery capability under fluctuating load and generation conditions. Experimental results demonstrate that the proposed control algorithm based on a transformer-oriented model effectively suppresses low-order harmonic currents. In addition the system exhibits strong anti-interference performance during sudden voltage and power variations providing a reliable foundation for the modulation and optimization of offshore wind–solar coupled hydrogen production power supply systems.

With the increasing maturity of renewable energy technologies and the pressing need to address climate change urban power systems are striving to integrate a higher proportion of low-carbon renewable energy sources. However the inherent variability and intermittency of wind and solar power pose significant challenges to the stability and reliability of urban power grids. Existing research has primarily focused on short-term energy storage solutions or small-scale integrated energy systems which are insufficient to address the long-term large-scale energy storage needs of urban areas with high renewable energy penetration. This paper proposes a mid-to-long-term capacity expansion model for hydrogen energy storage in urban-scale power systems using Shanghai as a case study. The model employs mixed-integer linear programming (MILP) to optimize the generation portfolios from the present to 2060 under two scenarios: with and without hydrogen storage. The results demonstrate that by 2060 the installed capacity of hydrogen electrolyzers could reach 21.5 GW and the installed capacity of hydrogen power generators could reach 27.5 GW accounting for 30% of the total installed capacity excluding their own. Compared to the base scenario the electricity–hydrogen collaborative energy supply system increases renewable penetration by 11.6% and utilization by 12.9% while reducing the levelized cost of urban comprehensive electricity (LCOUCE) by 2.514 cents/kWh. These findings highlight the technical feasibility and economic advantages of deploying long-term hydrogen storage in urban grids providing a scalable solution to enhance the stability and efficiency of high-renewable urban power systems.

Hydrogen (H2) fuel is one of eco-friendly resources for delivering de-carbonized and sustainable electricity supply in line with the UN’s Sustainable Development Goals 7 and 13 for affordable and clean energy and climate change action respectively. This paper presents a state-of-the art review of the H2 energy resource in terms of its history and evolution production techniques global economy market perspective and application to microgrid systems. It also introduces a systematic classification of the fuel. The production techniques examined include: the thermal approach such as the reforming gasification and thermochemical processes; the photocatalytic approach otherwise called artificial photosynthesis; the biological and photonic approach that involves the photolysis photo-fermentation dark fermentation CO gas fermentation and biomass valorization processes to produce H2 while the electrical approach is based on the chemical dissociation of electrolytes into their constituent ions by the passage of electric current. A particular attention is paid to the potential of the H2 resource in running some energy generators in microgrid systems such as the internal combustion engines microturbines and the fuel cells that are useful for combined heat and power application. The paper introduces different technical configurations topologies and processes that involve the use of green H2 fuel in generating systems and the connection of bus bars power converters battery bank and the electrical and thermal loads. The paper also presents hybrid fuel cell (FC) and PV system simulation using System Advisor Model (SAM) to showcase the use of H2 fuel in a micogrid. The paper provides insightful directions into the H2 economy smart electrical grid and the future prospects.

Zero-emission fuels are expected to drive the maritime sector decarbonisation with hydrogen emerging as a long-term solution. This study aims to investigate by using CFD modelling a hydrogen fuelled marine dual-fuel engine to identify operating settings ranges for different hydrogen energy fractions (HEF) as well as parametrically optimise the diesel fuel injection timing and temperature at inlet valve closing (IVC). A large marine four-stroke engine with nominal power of 10.5 MW at 500 rev/m is considered assuming operation at 90 % load and hydrogen injection in the cylinders intake ports. CFD models are developed for several operating scenarios in both diesel and dual-fuel modes. The models are validated against measured data for the engine diesel mode and literature data for a hydrogen-fuelled light-duty engine. A convergence study is conducted to select the grid compromising between computational effort and accuracy. Parametric runs for 20 % 40 % and 60 % HEF with different IVC temperature and diesel start of injection are modelled to quantify the engine performance emissions and combustion characteristics. A single parameter optimisation is conducted to determine the most effective pilot diesel injection timings. The results reveal the IVC temperature range for stable hydrogen combustion to avoid incomplete combustion at low IVC temperature and knocking above 360 K. The proposed settings lead to higher peak heat release rate and in-cylinder pressure compared to the diesel mode without exceeding the permissible in-cylinder pressure rise limits for 60 % HEF. However NOx emissions increase to 12.9 g/kWh in the dual-fuel mode. The optimal start of injection (SOI) for the diesel fuel in the case of 60 % HEF is found 8 ◦CA BTDC resulting in an indicated thermal efficiency of 43.2 % and stable combustion. Advancing SOI beyond the optimal value results in incomplete combustion. This is the first study on hydrogen use in large marine four-stroke engines providing insights for the engine design and operation and as such it contributes to the maritime industry decarbonisation efforts.

This work studies the feasibility of integrating a hydrogen-powered propulsion system in a regional aircraft at the conceptual design level. The developed system consists of fuel cells which will be studied at three technological levels and batteries also studied for four hybridization factors (X = 0 0.05 0.10 0.20). Hydrogen can absorb great thermal loads since it is stored in the tank at cryogenic temperatures and is used as fuel in the fuel cells at around 80 ◦C. Taking advantage of this characteristic two thermal management system (TMS) architectures were developed to ensure the proper functioning of the aircraft during the designated mission: A1 which includes a vapor compression system (VCS) and A2 which omits it for a simpler design. The models were developed in MATLAB® and consist of different components and technologies commonly used in such systems. The analysis reveals that A2 due to the exclusion of the VCS outperformed A1 in weight (10–23% reduction) energy consumption and drag. A1’s TMS required significantly more energy due to the VCS compressor. Hybridization with batteries increased system weight substantially (up to 37% in A2) and had a greater impact on energy consumption in A2 due to additional fan work. Hydrogen’s heat sink capacity remained underutilized and the hydrogen tank was deemed suitable for a non-integral fuselage design. A2 had the lowest emissions (10–20% lower than A1 for X = 0) but hybridization negated these benefits significantly increasing emissions in pessimistic scenarios.

Hydrogen internal combustion engines are pivotal components of the power industry for achieving zero-carbon emissions. However the development of hydrogen engines is still in its infancy and experimental research on their injection strategies lacks systematization. In this study the individual impacts of hydrogen injection pressure (within low-pressure ranges) and injection timing as well as their coupling effects on combustion characteristics engine efficiency and exhaust emissions were experimentally investigated. Results show that under fixed timing an injection pressure of 25–27.5 bar yields the highest and earliest peak in-cylinder pressures whereas at 15 bar the ignition delay increases to 14.7°CA the flame development duration extends to 8.57°CA and the late combustion duration shortens to 41.37°CA; the exhaust gas temperature peaks at 628 K at 20 bar and NOX peaks at 537 ppm at 25 bar. BTE (brake thermal efficiency) exhibits a U-shaped relationship with pressure with the minimum efficiency occurring near 25 bar when timing is held constant; advancing start of injection from 130° BTDC to 170° BTDC reduces both NOX and exhaust gas temperature with the optimal fuel economy at 140° BTDC and a peak in-cylinder pressure that is approximately 7 % higher and occurs 2–3°CA earlier at 130–140° BTDC. In the pressure–timing maps IMEP (indicated mean effective pressure) is maximized at 30 bar and 90° BTDC; BTE reaches 33.5 % at 25 bar and 100° BTDC; NOX attains a minimum at 25 bar and 110° BTDC while the exhaust gas temperature is lowest at 25 bar and 120° BTDC. Injection pressure is the primary lever for regulating fuel economy and emissions while injection timing mainly adjusts combustion phasing and IMEP. The results provide clear guidance for calibrating low-pressure hydrogen injection systems supply benchmark data for model validation and support the development of practical control strategies for hydrogen engines.

This study investigates the effects of varying hydrogen percentages in fuel blends on combustion dynamics engine performance and emissions. Experimental data and analytical equations were used to evaluate combustion parameters such as equivalent lambda in-cylinder pressure heat release rate and ignition timing. The findings demonstrate that hydrogen blending enhances combustion stability shortens ignition delay and shifts peak heat release to be closer to the top dead center (TDC). These changes improve thermal efficiency and reduce cycle-to-cycle variation. Hydrogen blending also significantly lowers carbon dioxide (CO2) and hydrocarbon (HC) emissions particularly at higher blend levels (H0–H5) while lower blends increase nitrogen oxides (NOx) emissions and risk pre-ignition due to advanced start of combustion (SOC). Engine performance improved with an average hydrogen energy contribution of 12% under a constant load. However the optimal hydrogen blending range is crucial to balancing efficiency gains and emission reductions. These results underline the potential of hydrogen as a cleaner additive fuel and the importance of optimizing blend ratios to harness its benefits effectively.