Applications & Pathways
Analysis of Hydrogen Filling of 175 Liter Tank for Large-Sized Hydrogen Vehicle
May 2022
Publication
Due to the low density of hydrogen gas under ambient temperature and atmospheric pressure conditions the high-pressure gaseous hydrogen storage method is widely employed. With high-pressure characteristics of hydrogen storage rigorous safety precautions are required such as filling of compressed gas in a hydrogen tank to achieve reliable operational solutions. Especially for the large-sized tanks (above 150 L) safety operation of hydrogen storage should be considered. In the present study the compressed hydrogen gas behavior in a large hydrogen tank of 175 L is investigated for its filling. To validate the numerical approach used in this study numerical models for the adaptation of the gas and turbulence models are examined. Numerical parametric studies on hydrogen filling for the large hydrogen tank of 175 L are conducted to estimate the hydrogen gas behavior in the hydrogen tank under various conditions of state of charge of pressure and ambient temperature. From the parametric studies the relationship between the initial SOC pressure condition and the maximum temperature rise of hydrogen gas was shown. That is the maximum temperature rise increases as the ambient temperature decreases and the rise increases as the SOC decreases.
Utilization and Recycling of End of Life Plastics for Sustainable and Clean Industrial Processes Including the Iron and Steel Industry
Aug 2019
Publication
About 400 million tonnes of plastics are produced per annum worldwide. End-of-life of plastics disposal contaminates the waterways aquifers and limits the landfill areas. Options for recycling plastic wastes include feedstock recycling mechanical /material recycling industrial energy recovery municipal solid waste incineration. Incineration of plastics containing E-Wastes releases noxious odours harmful gases dioxins HBr polybrominated diphenylethers and other hydrocarbons. This study focusses on recycling options in particular feedstock recycling of plastics in high-temperature materials processing for a sustainable solution to the plastic wastes not suitable for recycling. Of the 7% CO2 emissions attributed to the iron and steel industry worldwide ∼30% of the carbon footprint is reduced using the waste plastics compared to other carbon sources in addition to energy savings. Plastics have higher H2 content than the coal. Hydrogen evolved from the plastics acts as the reductant alongside the carbon monoxide. Hydrogen reduction of iron ore in presence of plastics increases the reaction rates due to higher diffusion of H2 compared to CO. Plastic replacement reduces the process temperature by at least 100–200 °C due to the reducing gases (hydrogen) which enhance the energy efficiency of the process. Similarly plastics greatly reduce the emissions in other high carbon footprint process such as magnesia production while contributing to energy.
Five Minute Guide to Hydrogen
Feb 2016
Publication
Hydrogen is an emerging energy vector many components of which are mature technologies. Current hydrogen technology is already able to provide advantages over other energy vectors and many of its challenges are being actively addressed by research and development.<br/><br/>Hydrogen can be derived stored and converted through various processes each of which represents different levels of carbon intensity efficiency and end use functionality. Our latest five minute guide looks at this energy vector in brief including public perception transportation and storage as well as using hydrogen as a solution.
Multi-Period Planning of Hydrogen Supply Network for Refuelling Hydrogen Fuel Cell Vehicles in Urban Areas
May 2020
Publication
The hydrogen economy refers to an economic and industrial structure that uses hydrogen as its main energy source replacing traditional fossil-fuel-based energy systems. In particular the widespread adoption of hydrogen fuel cell vehicles (HFCVs) is one of the key factors enabling a hydrogen economy and aggressive investment in hydrogen refuelling infrastructure is essential to make large-scale adoption of HFCVs possible. In this study we address the problem of effectively designing a hydrogen supply network for refuelling HFCVs in urban areas relatively far from a large hydrogen production site such as a petrochemical complex. In these urban areas where mass supply of hydrogen is not possible hydrogen can be supplied by reforming city gas. In this case building distributed hydrogen production bases that extract large amounts of hydrogen from liquefied petroleum gas (LPG) or compressed natural gas (CNG) and then supply hydrogen to nearby hydrogen stations may be a cost-effective option for establishing a hydrogen refuelling infrastructure in the early stage of the hydrogen economy. Therefore an optimization model is proposed for effectively deciding when and where to build hydrogen production bases and hydrogen refuelling stations in an urban area. Then a case study of the southeastern area of Seoul known as a commercial and residential center is discussed. A variety of scenarios for the design parameters of the hydrogen supply network are analyzed based on the target of the adoption of HFCVs in Seoul by 2030. The proposed optimization model can be effectively used for determining the time and sites for building hydrogen production bases and hydrogen refuelling stations.
Modelling and Simulation of a Zero-emission Hybrid Power Plant for a Domestic Ferry
Jan 2021
Publication
This paper presents a simulation tool for marine hybrid power-plants equipped with polymer exchange membrane fuel cells and batteries. The virtual model through the combination of operational data and dynamically modelled subsystems can simulate power-plants of different sizes and configurations in order to analyze the response of different energy management strategies. The model aims to replicate the realistic behavior of the components included in the vessel's grid to asses if the hardware selected by the user is capable of delivering the power set-point requested by the energy management system. The model can then be used to optimize key factors such as hydrogen consumption. The case study presented in the paper demonstrates how the model can be used for the evaluation of a retrofitting operation replacing a diesel electric power-plant with fuel cells and batteries. The vessel taken into consideration is a domestic ferry operating car and passenger transport in Denmark. The vessel is outfitted with a diesel electric plant and an alternative hybrid power-plant is proposed. The hybrid configuration is tested using the model in a discrete time-domain.
Hydrogen as a Maritime Fuel–Can Experiences with LNG Be Transferred to Hydrogen Systems?
Jul 2021
Publication
As the use of fossil fuels becomes more and more restricted there is a need for alternative fuels also at sea. For short sea distance travel purposes batteries may be a solution. However for longer distances when there is no possibility of recharging at sea batteries do not have sufficient capacity yet. Several projects have demonstrated the use of compressed hydrogen (CH2) as a fuel for road transport. The experience with hydrogen as a maritime fuel is very limited. In this paper the similarities and differences between liquefied hydrogen (LH2) and liquefied natural gas (LNG) as a maritime fuel will be discussed based on literature data of their properties and our system knowledge. The advantages and disadvantages of the two fuels will be examined with respect to use as a maritime fuel. Our objective is to discuss if and how hydrogen could replace fossil fuels on long distance sea voyages. Due to the low temperature of LH2 and wide flammability range in air these systems have more challenges related to storage and processing onboard than LNG. These factors result in higher investment costs. All this may also imply challenges for the LH2 supply chain.
Earth Abundant Spinel for Hydrogen Production in a Chemical Looping Scheme at 550°C
Jun 2020
Publication
Operating chemical looping process at mid-temperatures (550-750 oC) presents exciting potential for the stable production of hydrogen. However the reactivity of oxygen carriers is compromised by the detrimental effect of the relatively low temperatures on the redox kinetics. Although the reactivity at mid-temperature can be improved by the addition of noble metals the high cost of these noble metal containing materials significantly hindered their scalable application. In the current work we propose to incorporate earth-abundant metals into the iron-based spinel for hydrogen production in a chemical looping scheme at mid-temperatures. Mn0.2Co0.4Fe2.4O4 shows a high hydrogen production rate at the average rate of ∼0.62 mmol.g-1.min-1 and a hydrogen yield of ∼9.29 mmol.g-1 with satisfactory stability over 20 cycles at 550 oC. The mechanism studies manifest that the enhanced hydrogen production performance is a result of the improved oxygen-ion conductivity to enhance reduction reaction and high reactivity of reduced samples with steam. The performance of the oxygen carriers in this work is comparable to those noble-metal containing materials enabling their potential for industrial applications.
Mobile Phone Infrastructure Development: Lessons for the Development of a Hydrogen Infrastructure
Apr 2014
Publication
The development of new infrastructure is often a consideration in the introduction of new innovations. Currently there is some confusion around how to develop a hydrogen infrastructure to support the introduction of FCVs. Lessons can be learned from similar technology introduction in the past and therefore this paper investigates how mobile phone infrastructure was developed allowing the mass-market penetration of mobile phones. Based on this successful infrastructural development suggestions can be made on the development of a hydrogen infrastructure. It is suggested that a hydrogen infrastructure needs to be pre-developed 3–5 years before the market introduction of FCVs can successfully occur. A lack of infrastructural pre-development will cause to the market introduction of FCVs to fail.
Design and Dynamics Simulations of Small Scale Solid Oxide Fuel Cell Trigeneration System
Dec 2018
Publication
This paper presents the design of a solid oxide fuel cell (SOFC) tri-generation system that consists of an SOFC-combined heat and power subsystem an adsorption refrigeration subsystem and coupling devices between the two subsystems. Whereas typical extant designs use absorption techniques the proposed design employs adsorption refrigeration. In this paper the dynamics of adsorption refrigeration are reported in detail to evaluate the feasibility of the tri-generation system design. The design of the coupling devices and instrumentation strategies of the overall system are discussed in detail. Simulation results indicate that the proposed SOFC trigeneration system can output 4.35 kW of electrical power 2.448 kW of exhaust heat power and 1.348 kW of cooling power. The energy efficiency is 64.9% and the coefficient of performance of the refrigeration is 0.32. Varying the electrical output power results in the variation of exhaust heat power but not the cooling power; varying the cooling power affects the exhaust heat power but not the electrical power. These favorable features can be attributed to the proposed heat exchange sequence and active temperature controls of the system.
Perspectives on Cathodes for Protonic Ceramic Fuel Cells
Jun 2021
Publication
Protonic ceramic fuel cells (PCFCs) are promising electrochemical devices for the efficient and clean conversion of hydrogen and low hydrocarbons into electrical energy. Their intermediate operation temperature (500–800 °C) proffers advantages in terms of greater component compatibility unnecessity of expensive noble metals for the electrocatalyst and no dilution of the fuel electrode due to water formation. Nevertheless the lower operating temperature in comparison to classic solid oxide fuel cells places significant demands on the cathode as the reaction kinetics are slower than those related to fuel oxidation in the anode or ion migration in the electrolyte. Cathode design and composition are therefore of crucial importance for the cell performance at low temperature. The different approaches that have been adopted for cathode materials research can be broadly classified into the categories of protonic–electronic conductors oxide-ionic–electronic conductors triple-conducting oxides and composite electrodes composed of oxides from two of the other categories. Here we review the relatively short history of PCFC cathode research discussing trends highlights and recent progress. Current understanding of reaction mechanisms is also discussed.
Thoughts on the Prospects of Renewable Hydrogen
Oct 2020
Publication
In the last two years or so there has been increasing interest in hydrogen as an energy source in Australia and around the world. Notably this is not the first time that hydrogen has caught our collective interest. Most recently the 2000s saw a substantial investment in hydrogen research development and demonstration around the world. Prior to that the oil crises of the 1970s also stimulated significant investment in hydrogen and earlier still the literature on hydrogen was not lacking. And yet the hydrogen economy is still an idea only.<br/>So what if anything might be different this time?<br/>This is an important question that we all need to ask and for which the author can only give two potential answers. First our need to make dramatic reductions in greenhouse gas (GHG) emissions has become more pressing since these previous waves of interest. Second renewable energy is considerably more affordable now than it was before and it has consistently outperformed expectations in terms of cost reductions by even its strongest supporters.<br/>While this dramatic and ongoing reduction in the cost of renewables is very promising our need to achieve substantial GHG emission reductions is the crucial challenge. Moreover meeting this challenge needs to be achieved with as little adverse social and economic impact as possible.<br/>When considering what role hydrogen might play we should first think carefully about the massive scale and complexity of our global energy system and the typical prices of the major energy commodities. This provides insights into what opportunities hydrogen may have. Considering a temperate country with a small population like Australia we see that domestic natural gas and transport fuel markets are comparable to and even larger than the electricity market on an energy basis.
Technology Assessment of Hydrogen Firing of Process Heaters
Apr 2011
Publication
In conjunction with John Zink Co. LLC the Chevron Energy Technology Company conducted a three part study evaluating potential issues with switching refinery process heaters from fuel gas to hydrogen fuel for the purpose of greenhouse gas emissions reduction via CO2 capture and storage.
The focus was on the following areas:
The focus was on the following areas:
- Heater performance
- Burner performance and robustness
- Fuel gas system retrofit requirements
Comparative Technical and Economic Analyses of Hydrogen-Based Steel and Power Sectors
Mar 2024
Publication
Decarbonizing the current steel and power sectors through the development of the hydrogen direct-reduction iron ore–electric arc furnace route and the 100% hydrogen-fired gas turbine cycle is crucial. The current study focuses on three clusters of research works. The first cluster covers the investigation of the mass and energy balance of the route and the subsequent application of these values in experiments to optimize the reduction yield of iron ore. In the second cluster the existing gas turbine unit was selected for the complete replacement of natural gas with hydrogen and for finding the most optimal mass and energy balance in the cycle through an Aspen HYSYS model. In addition the chemical kinetics in the hydrogen combustion process were simulated using Ansys Chemkin Pro to research the emissions. In the last cluster a comparative economic analysis was conducted to identify the levelized cost of production of the route and the levelized cost of electricity of the cycle. The findings in the economic analysis provided good insight into the details of the capital and operational expenditures of each industrial sector in understanding the impact of each kg of hydrogen consumed in the plants. These findings provide a good basis for future research on reducing the cost of hydrogen-based steel and power sectors. Moreover the outcomes of this study can also assist ongoing large-scale hydrogen and ammonia projects in Uzbekistan in terms of designing novel hydrogen-based industries with cost-effective solutions.
Fuel Cells and Hydrogen for Green Energy in European Cities and Regions
Sep 2018
Publication
Fuel cells and hydrogen are a viable solution for European regions and cities to reduce their emissions and realise their green energy transition says new FCH JU study.
In 2017 the FCH JU launched an initiative to support regions and cities in this regard. Today 89 regions and cities participate representing about one quarter of Europe's population surface area and GDP. These regions are pursuing ambitious plans to deploy FCH technology in the coming years. FCH investments totalling about EUR 1.8 billion are planned for these regions in the next 5 years. These planned investments can contribute significantly to further developing the FCH market in Europe and driving the sector towards commercialisation.
The new study provides a detailed insight into the FCH investment plans of the participating regions and cities and points out next steps to be taken for realising a European FCH roadmap with a view to commercialising the technology. In particular the study shows that:
In 2017 the FCH JU launched an initiative to support regions and cities in this regard. Today 89 regions and cities participate representing about one quarter of Europe's population surface area and GDP. These regions are pursuing ambitious plans to deploy FCH technology in the coming years. FCH investments totalling about EUR 1.8 billion are planned for these regions in the next 5 years. These planned investments can contribute significantly to further developing the FCH market in Europe and driving the sector towards commercialisation.
The new study provides a detailed insight into the FCH investment plans of the participating regions and cities and points out next steps to be taken for realising a European FCH roadmap with a view to commercialising the technology. In particular the study shows that:
- European regions and cities need to take action now to realise their ambitious emission reduction targets and improve local air quality.
- Investing in fuel cell and hydrogen technology pays off for cities and regions as it provides a mature safe and competitive zero-emission solution for all their energy needs.
- Regions and cities can benefit from investing in hydrogen and fuel cells not only in environmental terms but also by stimulating local economic growth and creating attractive places to live work and visit.
- The Regions and Cities Initiative provides a unique opportunity to benefit from existing knowledge draw on project development support and financing assistance to realise own FCH deployment projects.
- To enable the realisation of the envisaged FCH deployment plans of the regions and cities continued support will be required for individual projects as well as the coalition at large.
Hydrogen Implications for Gas Network Operators
Jan 2021
Publication
Europe has built up one of the best gas distribution infrastructures in the world. There’s one problem though. It distributes natural gas a fuel that we will hardly be able to use if we’re to reach our net zero targets. Can we use the infrastructure instead for clean hydrogen – either blended with natural gas as a stepping stone or with pure hydrogen in the future? In this episode we put aside discussion on the extent to which we should do this – and focus on whether or not we can do this and what’s involved in doing so.
Jon Slowe is joined by Eva Hennig Head of Department for EU Energy Policy at Thüga an alliance of German municipal energy companies (as well as chair of Eurogas’s distribution committee); Keith Owen Head of Systems Development and Energy Strategy at Northern Gas Networks in the UK; and Delta-EE expert Rob Castek.
Jon Slowe is joined by Eva Hennig Head of Department for EU Energy Policy at Thüga an alliance of German municipal energy companies (as well as chair of Eurogas’s distribution committee); Keith Owen Head of Systems Development and Energy Strategy at Northern Gas Networks in the UK; and Delta-EE expert Rob Castek.
Continuous Synthesis of Few-layer MoS2 with Highly Electrocatalytic Hydrogen Evolution
Apr 2020
Publication
As one of the most promising alternative fuels hydrogen is expected with high hopes. The electrolysis of water is regarded as the cleanest and most efficient method of hydrogen production. Molybdenum disulfide (MoS2) is deemed as one of the most promising alternatives HER catalysts owing to its high catalytic activity and low cost. Its continuous production and efficient preparation become the key problems in future industrial production. In this work we first developed a continuous micro-reaction approach with high heat and mass transfer rates to synthesize few-layer MoS2 nanoplates with abundant active sites. The defective MoS2 ultrathin nanoplates exhibit excellent HER performance with an overpotential of 260 mV at a current density of 10 mA cm-2 small Tafel slope (53.6 mV dec-1) and prominent durability which are comparable to most reported MoS2 based catalysts. Considering the existence of continuous devices it’s suitable for the synthesis of MoS2 as high-performance electrocatalysts for the industrial water electrolysis. The novel preparation method may open up a new way to synthesize all two-dimension materials toward HER.
Alternative Marine Fuels: Prospects Based on Multi-criteria Decision Analysis Involving Swedish Stakeholders
May 2019
Publication
There is a need for alternative marine fuels in order to reduce the environmental and climate impacts of shipping in the short and long term. This study assesses the prospects for seven alternative fuels for the shipping sector in 2030 including biofuels by applying a multi-criteria decision analysis approach that is based on the estimated fuel performance and on input from a panel of maritime stakeholders and by considering explicitly the influence of stakeholder preferences. Seven alternative marine fuels—liquefied natural gas (LNG) liquefied biogas (LBG) methanol from natural gas renewable methanol hydrogen for fuel cells produced from (i) natural gas or (ii) electrolysis based on renewable electricity and hydrotreated vegetable oil (HVO)—and heavy fuel oil (HFO) as benchmark are included and ranked by ten performance criteria and their relative importance. The criteria cover economic environmental technical and social aspects. Stakeholder group preferences (i.e. the relative importance groups assign to the criteria) influence the ranking of these options. For ship-owners fuel producers and engine manufacturers economic criteria in particular the fuel price are the most important. These groups rank LNG and HFO the highest followed by fossil methanol and then various biofuels (LBG renewable methanol and HVO). Meanwhile representatives from Swedish government authorities prioritize environmental criteria specifically GHG emissions and social criteria specifically the potential to meet regulations ranking renewable hydrogen the highest followed by renewable methanol and then HVO. Policy initiatives are needed to promote the introduction of renewable marine fuels.
Transitioning to Hydrogen
Jan 2020
Publication
The UK is investigating supplying hydrogen to homes and businesses instead of natural gas by “repurposing” the gas network. It presents a major engineering challenge which has never been done anywhere else in the world.
In a new report titled ‘Transitioning to hydrogen’ experts from a cross-professional engineering institution (PEI) working group including the IET have assessed the engineering risks and uncertainties and concluded there is no reason why repurposing the gas network to hydrogen cannot be achieved. But there are several engineering risks and uncertainties which need to be addressed.
In a new report titled ‘Transitioning to hydrogen’ experts from a cross-professional engineering institution (PEI) working group including the IET have assessed the engineering risks and uncertainties and concluded there is no reason why repurposing the gas network to hydrogen cannot be achieved. But there are several engineering risks and uncertainties which need to be addressed.
South Korea’s Big Move to Hydrogen Society
Nov 2020
Publication
Extensive energy consumption has become a major concern due to increase of greenhouse gas emissions and global warming. Hence hydrogen has attracted attention as a green fuel with zero carbon emission for green transportation through production of electric vehicles with hydrogen fuel cells. South Korea has launched a hydrogen society policy with the objective of expanding production of hydrogen from renewable energy sources. The hydrogen economy will play a critical role in reducing atmospheric pollution and global arming. However new development of infrastructure for hydrogen refuelling and increasing awareness of the hydrogen economy is required together with reduced prices of hydrogen-driven vehicles that are promising options for a sustainable green hydrogen economy.
Voltammetric and Galvanostatic Methods for Measuring Hydrogen Crossover in Fuel Cell
Dec 2021
Publication
Hydrogen crossover rate is an important indicator for characterizing the membrane degradation and failure in proton exchange membrane fuel cell. Several electrochemical methods have been applied to quantify it. But most of established methods are too rough to support follow-up applications. In this paper a systematic and consistent theoretical foundation for electrochemical measurements of hydrogen crossover is established for the first time. Different electrochemical processes occurring throughout the courses of applying potentiostatic or galvanostatic excitations on fuel cell are clarified and the linear current–voltage behavior observed in the steady-state voltammogram is reinterpreted. On this basis we propose a modified galvanostatic charging method with high practicality to achieve accurate electrochemical measurement of hydrogen crossover and the validity of this method is fully verified. This research provides an explicit framework for implementation of galvanostatic charging method and offers deeper insights into the principles of electrochemical methods for measuring hydrogen crossover.
No more items...