India
Emissions control and performance evaluation of spark ignition engine with oxy-hydrogen blending
Mar 2018
Publication
Fast depletion of fossil fuels and their detrimental effect to the environment is demanding an urgent need of alternative fuels for meeting sustainable energy demand with minimum environmental impact. Expert studies indicate hydrogen is one of the most promising energy carriers for the future due to its superior combustion qualities and availability. The use of hydrogen in spark ignition internal combustion engine may be part of an integrated solution to the problem of depletion of fossil fuels and pollution of the environment. The broader flammability limits and fast flame propagation velocity of hydrogen ensures complete combustion of fuel and allows engine to be operated at lean ranges. Lean burn operation comparatively maintains NOx CO and HC emissions at a very low level. In the present work oxyhydrogen (HHO) gas is produced in leak proof plexiglass reactor by electrolysis of water using potassium hydroxide as electrolyte. The HHO gas generator is attached to a spark ignition engine currently operating on the road without any modifications of the engine. The HHO gas produced is then added to the air which is being drawn into the engine. Experiments were conducted on a 4-stroke single cylinder natural air cooled spark ignition engine to determine total fuel consumption specific fuel consumption air fuel ratio brake power and brake thermal efficiency and emissions CO CO2 O2 NOx HC at different loads with and without addition of HHO gas to gasoline for lower speeds ranging from 700 rpm to 1500 rpm. Also mileage tests were conducted to find the speed at which the fuel consumption is optimum.
Hydrogen Embrittlement of Steel Pipelines During Transients
May 2021
Publication
Blending hydrogen into natural gas pipelines is a recent alternative adopted for hydrogen transportation as a mixture with natural gas. In this paper hydrogen embrittlement of steel pipelines originally designed for natural gas transportation is investigated. Solubility permeation and diffusion phenomena of hydrogen molecules into the crystalline lattice structure of the pipeline material are followed up based on transient evolution of internal pressure applied on the pipeline wall. The transient regime is created through changes of gas demand depending on daily consumptions. As a result the pressure may reach excessive values that lead to the acceleration of hydrogen solubility and its diffusion through the pipeline wall. Furthermore permeation is an important parameter to determine the diffusion amount of hydrogen inside the pipeline wall resulting in the embrittlement of the material. The numerical obtained results have shown that using pipelines designed for natural gas conduction to transport hydrogen is a risky choice. Actually added to overpressure and great fluctuations during transients that may cause fatigue and damage the structure also the latter pressure evolution is likely to induce the diffusion phenomena of hydrogen molecules into the lattice of the structure leading to brittle the pipe material. The numerical simulation reposes on solving partial differential equations describing transient gas flow in pipelines coupled with the diffusion equation for mass transfer. The model is built using the finite elements based software COMSOL Multiphysics considering different cases of pipe material; API X52 (base metal and nutrided) and API X80 steels. Obtained results allowed tracking the evolution with time of hydrogen concentration through the pipeline internal wall based on the pressure variation due to transient gas flow. Such observation permits to estimate the amount of hydrogen diffused in the metal to avoid leakage of this flammable gas. Thus precautions may be taken to prevent explosive risks due to hydrogen embrittlement of steel pipelines among other effects that can lead to alter safe conditions of gas conduction.
Utilization and Recycling of End of Life Plastics for Sustainable and Clean Industrial Processes Including the Iron and Steel Industry
Aug 2019
Publication
About 400 million tonnes of plastics are produced per annum worldwide. End-of-life of plastics disposal contaminates the waterways aquifers and limits the landfill areas. Options for recycling plastic wastes include feedstock recycling mechanical /material recycling industrial energy recovery municipal solid waste incineration. Incineration of plastics containing E-Wastes releases noxious odours harmful gases dioxins HBr polybrominated diphenylethers and other hydrocarbons. This study focusses on recycling options in particular feedstock recycling of plastics in high-temperature materials processing for a sustainable solution to the plastic wastes not suitable for recycling. Of the 7% CO2 emissions attributed to the iron and steel industry worldwide ∼30% of the carbon footprint is reduced using the waste plastics compared to other carbon sources in addition to energy savings. Plastics have higher H2 content than the coal. Hydrogen evolved from the plastics acts as the reductant alongside the carbon monoxide. Hydrogen reduction of iron ore in presence of plastics increases the reaction rates due to higher diffusion of H2 compared to CO. Plastic replacement reduces the process temperature by at least 100–200 °C due to the reducing gases (hydrogen) which enhance the energy efficiency of the process. Similarly plastics greatly reduce the emissions in other high carbon footprint process such as magnesia production while contributing to energy.
A Review on Recent Advances in Hydrogen Energy, Fuel Cell, Biofuel and Fuel Refining via Ultrasound Process Intensification
Mar 2021
Publication
Hydrogen energy is one of the most suitable green substitutes for harmful fossil fuels and has been investigated widely. This review extensively compiles and compares various methodologies used in the production storage and usage of hydrogen. Sonochemistry is an emerging synthesis process and intensification technique adapted for the synthesis of novel materials. It manifests acoustic cavitation phenomena caused by ultrasound where higher rates of reactions occur locally. The review discusses the effectiveness of sonochemical routes in developing fuel cell catalysts fuel refining biofuel production chemical processes for hydrogen production and the physical chemical and electrochemical hydrogen storage techniques. The operational parameters and environmental conditions used during ultrasonication also influence the production rates which have been elucidated in detail. Hence this review's major focus addresses sonochemical methods that can contribute to the technical challenges involved in hydrogen usage for energy.
Production of Advanced Fuels Through Integration of Biological, Thermo-Chemical and Power to Gas Technologies in a Circular Cascading Bio-Based System
Sep 2020
Publication
In the transition to a climate neutral future the transportation sector needs to be sustainably decarbonized. Producing advanced fuels (such as biomethane) and bio-based valorised products (such as pyrochar) may offer a solution to significantly reduce greenhouse gas (GHG) emissions associated with energy and agricultural circular economy systems. Biological and thermochemical bioenergy technologies together with power to gas (P2G) systems can generate green renewable gas which is essential to reduce the GHG footprint of industry. However each technology faces challenges with respect to sustainability and conversion efficiency. Here this study identifies an optimal pathway leading to a sustainable bioenergy system where the carbon released in the fuel is offset by the GHG savings of the circular bio-based system. It provides a state-of-the-art review of individual technologies and proposes a bespoke circular cascading bio-based system with anaerobic digestion as the key platform integrating electro-fuels via P2G systems and value-added pyrochar via pyrolysis of solid digestate. The mass and energy analysis suggests that a reduction of 11% in digestate mass flow with the production of pyrochar bio-oil and syngas and an increase of 70% in biomethane production with the utilization of curtailed or constrained electricity can be achieved in the proposed bio-based system enabling a 70% increase in net energy output as compared with a conventional biomethane system. However the carbon footprint of the electricity from which the hydrogen is sourced is shown to be a critical parameter in assessing the GHG balance of the bespoke system.
Indentation and Hydride Orientation in Zr-2.5%Nb Pressure Tube Material
Jun 2019
Publication
In this study indentations were made on Zr-2.5%Nb pressure tube material to induce multi-axial stress field. An I-shaped punch mark was indented on the Pressure tube material with predefined punch load. Later material was charged with 50 wppm of hydrogen. The samples near the punch mark were metallographically examined for hydrides orientation. It was observed that hydrides exhibited preferentially circumferential orientation far away from the indent to mixed orientation containing both circumferential and radial hydrides near the indent. This is probably as a result of stress field generated by indentation. Extent of radial hydride formation was observed to be varying with indentation load.
Insights into Renewable Hydrogen Energy: Recent Advances and Prospects
Jan 2020
Publication
Presently the fulfilment of world’s energy demand highly relies on the fossil fuel i.e. coal oil and natural gas. Fossil fuels pose threat to environment and biological systems on the earth. Usage of these fuels leads to an increase in the CO2 content in the atmosphere that causes global warming and undesirable climatic changes. Additionally these are limited sources of energy those will eventually dwindle. There is huge urge of identifying and utilizing the renewable energy resources to replace these fossil fuels in the near future as it is expected to have no impact on environment and thus would enable one to provide energy security. Hydrogen is one of the most desirable fuel capable of replacing vanishing hydrocarbons. In this review we present the status of energy demands recent advances in renewable energy and the prospects of hydrogen as a future fuel are highlighted. It gives a broad overview of different energy systems and mainly focuses on different technologies and their reliability for the production of hydrogen in present and future.
Numerical Modelling of Unconfined and Confined Hydrogen Explosion
Sep 2019
Publication
Numerical studies were conducted with the objective of gaining a better understanding of the consequences of potential explosion that could be associated with release of hydrogen in a confined and unconfined environment. This paper describes the work done by us in modelling explosion of accidental releases of hydrogen using our Fire Explosion Release Dispersion (FRED) software. CAM and SCOPE models in FRED is used for validation of congested/uncongested unconfined and congested/uncongested confined vapour cloud explosion respectively. In the first step CAM is validated against experiments of varying gas cloud size blockage ratio equivalence ratio of the mixture and blockage configuration. The model predictions of explosion overpressure are in good agreement with experiments. The results obtained from FRED i.e. overpressure as a function of distance match well in comparison to the experiments. In the second step SCOPE is validated against vented explosion experiments available in open literature. In general SCOPE reproduces the maximum overpressure within the factor of 2. Moreover it well predicts the trends of increase in overpressure with change in type of the fuel increase in number of obstacles blockage ratio and decrease in the vent size.
Plasmonic Nickel Nanoparticles Decorated on to LaFeO3 Photocathode for Enhanced Solar Hydrogen Generation
Nov 2018
Publication
Plasmonic Ni nanoparticles were incorporated into LaFeO3 photocathode (LFO-Ni) to excite the surface plasmon resonances (SPR) for enhanced light harvesting for enhancing the photoelectrochemical (PEC) hydrogen evolution reaction. The nanostructured LFO photocathode was prepared by spray pyrolysis method and Ni nanoparticles were incorporated on to the photocathode by spin coating technique. The LFO-Ni photocathode demonstrated strong optical absorption and higher current density where the untreated LFO film exhibited a maximum photocurrent of 0.036 mA/cm2 at 0.6 V vs RHE and when incorporating 2.84 mmol Ni nanoparticles the photocurrent density reached a maximum of 0.066 mA/cm2 at 0.6 V vs RHE due to the SPR effect. This subsequently led to enhanced hydrogen production where more than double (2.64 times) the amount of hydrogen was generated compared to the untreated LFO photocathode. Ni nanoparticles were modelled using Finite Difference Time Domain (FDTD) analysis and the results showed optimal particle size in the range of 70–100 nm for Surface Plasmon Resonance (SPR) enhancement.
Recent Advances in Biomass Pretreatment Technologies for Biohydrogen Production
Jan 2022
Publication
Hydrogen is an economical source of clean energy that has been utilized by industry for decades. In recent years demand for hydrogen has risen significantly. Hydrogen sources include water electrolysis hydrocarbon steam reforming and fossil fuels which emit hazardous greenhouse gases and therefore have a negative impact on global warming. The increasing worldwide population has created much pressure on natural fuels with a growing gap between demand for renewable energy and its insufficient supply. As a result the environment has suffered from alarming increases in pollution levels. Biohydrogen is a sustainable energy form and a preferable substitute for fossil fuel. Anaerobic fermentation photo fermentation microbial and enzymatic photolysis or combinations of such techniques are new approaches for producing biohydrogen. For cost-effective biohydrogen production the substrate should be cheap and renewable. Substrates including algal biomass agriculture residue and wastewaters are readily available. Moreover substrates rich in starch and cellulose such as plant stalks or agricultural waste or food industry waste such as cheese whey are reported to support dark- and photo-fermentation. However their direct utilization as a substrate is not recommended due to their complex nature. Therefore they must be pretreated before use to release fermentable sugars. Various pretreatment technologies have been established and are still being developed. This article focuses on pretreatment techniques for biohydrogen production and discusses their efficiency and suitability including hybrid-treatment technology
Numerical Modelling of Hazards of Hydrogen Storage
Sep 2017
Publication
For the general public to use hydrogen as a vehicle fuel they must be able to handle hydrogen with the same degree of confidence as conventional liquid and gaseous fuels. The hazards associated with jet releases from accidental leaks in a vehicle-refuelling environment must be considered if hydrogen is stored and used as a high-pressure gas since a jet release can result in a fire or explosion. This paper describes the work done by us in modelling some of the consequences of accidental releases of hydrogen implemented in our Fire Explosion Release Dispersion (FRED) software. The new dispersion model is validated against experimental data available in the open literature. The model predictions of hydrogen gas concentration as a function of distance are in good agreement with experiments. In addition FRED has been used to model the consequence of the bursting of a vessel containing compressed hydrogen. The results obtained from FRED i.e. overpressure as a function of distance match well in comparison to experiments. Overall it is concluded that FRED can model the consequences of an accidental release of hydrogen and the blast waves generated from bursting of vessel containing compressed hydrogen
Experimental Investigation on Helium Jet Release and Distribution in a Vented Cylindrical Enclosure – Effect of Wall Temperature Conditions
Oct 2015
Publication
Hydrogen generated during core meltdown accidents in nuclear reactors can cause serious threat to the structural integrity of the containment and safe operation of nuclear power plants. The study of hydrogen release and mixing within the containments is an important area of safety research as hydrogen released during such accidents in nuclear power plants can lead to hydrogen explosions and catastrophic consequences. A small scale experimental setup called the AERB-IIT Madras Hydrogen Mixing Studies (AIHMS) facility is setup at IIT Madras to study the distribution of hydrogen subsequent to release as a jet followed by its response to various wall thermal conditions. The present paper gives details of the design fabrication and instrumentation of the AIHMS facility and a comparison of features of the facility with respect to other facilities existing for hydrogen mitigation studies. Then it gives details of the experiments conducted and the results of the preliminary experiments on concentration build-up as a result of injection of gases (air and helium) and effect of thermally induced natural convection on gas mixing performed in this experimental facility.
Single Step Compact Steam Methane Reforming Process for Hydrogen-Cng (H-Cng) Production from Natural Gas
Sep 2011
Publication
Compressed natural gas (CNG) is being increasingly used as a clean transportation fuel. However for further reduction in emissions particularly NOx H-CNG mixture with ~ 20 % hydrogen is recommended. Presently most of the H-CNG mixture is produced by blending hydrogen with CNG. For hydrogen production Steam Methane Reforming (SMR) is a major process accounting for more than 90% of hydrogen production by various industries. In this process natural gas is first reformed to syn gas under severe operating conditions (Pressure 20-30 bar temperature 850-950 deg C) followed by conversion of CO to hydrogen in the shift reactor. Other method of hydrogen production such as electrolysis of water is more expensive. Further there are issues of safety with handling of hydrogen its storage and transportation for blending. In order to overcome these problems a single step compact process for the production of H-CNG gaseous mixture through low severity steam methane reforming of natural gas has been developed. It employs a catalyst containing nickel nickel oxide magnesium oxide and silica and has the capability of producing H-CNG mixture in the desired proportion containing 15-20 vol % hydrogen with nil CO production. The process is flexible and rugged allowing H-CNG production as per the demand. The gaseous H-CNG product mixture can directly be used as automobile fuel after compression. The process can help as important step in safe transition towards hydrogen economy. A demonstration unit is being set up at IOC R&D Centre.
Parametric Studies on LaNi4.7Al0.3 Based Hydrogen Storage Reactor with Embedded Cooling Tubes
Mar 2019
Publication
This study reports the investigative conclusions of parametric studies conducted to understand the effect of operating parameters on absorption and desorption characteristics of LaNi4.7Al0.3 metal hydride system for thermal management applications. Reactor with improved design containing 55 embedded cooling tubes is fabricated and filled with 4 kg of metal hydride alloy. Using water as heat transfer fluid (HTF) effects of supply pressure HTF temperature and HTF flow rate on absorption and desorption characteristics of the reactor are analyzed. Increasing supply pressure leads to prominent improvement in absorption capacity while the increase in HTF temperature enhanced desorption performance. At 20 bar and 20 °C 46.2877 g of hydrogen (1.16 wt%) was absorbed resulting in total energy output of 707.3 kJ for 300 s. During desorption at 80 °C with water flow rate of 8 lpm heat input of 608.1 kJ for 300 s resulted in 28.5259 g of hydrogen desorption.
Statistics, Lessons Learned and Recommendations from Analysis of HIAD 2.0 Database
Mar 2022
Publication
The manuscript firstly describes the data collection and validation process for the European Hydrogen Incidents and Accidents Database (HIAD 2.0) a public repository tool collecting systematic data on hydrogen-related incidents and near-misses. This is followed by an overview of HIAD 2.0 which currently contains 706 events. Subsequently the approaches and procedures followed by the authors to derive lessons learned and formulate recommendations from the events are described. The lessons learned have been divided into four categories including system design; system manufacturing installation and modification; human factors and emergency response. An overarching lesson learned is that minor events which occurred simultaneously could still result in serious consequences echoing James Reason's Swiss Cheese theory. Recommendations were formulated in relation to the established safety principles adapted for hydrogen by the European Hydrogen Safety Panel considering operational modes industrial sectors and human factors. This work provide an important contribution to the safety of systems involving hydrogen benefitting technical safety engineers emergency responders and emergency services. The lesson learned and the discussion derived from the statistics can also be used in training and risk assessment studies being of equal importance to promote and assist the development of sound safety culture in organisations.
Numerical Investigation of Hydrogen-air Deflagrations in a Repeated Pipe Congestion
Sep 2019
Publication
Emerging hydrogen energy technologies are creating new avenues for bring hydrogen fuel usage into larger public domain. Identification of possible accidental scenarios and measures to mitigate associated hazards should be well understood for establishing best practice guidelines. Accidentally released hydrogen forms flammable mixtures in a very short time. Ignition of such a mixture in congestion and confinements can lead to greater magnitudes of overpressure catastrophic for both structure and people around. Hence understanding of the permissible level of confinements and congestion around the hydrogen fuel handling and storage unit is essential for process safety. In the present study numerical simulations have been performed for the hydrogen-air turbulent deflagration in a well-defined congestion of repeated pipe rig experimentally studied by [1]. Large Eddy Simulations (LES) have been performed using the in-house modified version of the OpenFOAM code. The Flame Surface Wrinkling Model in the LES context is used for modelling deflagrations. Numerical predictions concerning the effects of hydrogen concentration and congestion on turbulent deflagration overpressure are compared with the measurements [1] to provide validation of the code. Further insight about the flame propagation and trends of the generated overpressures over the range of concentrations are discussed.
In-situ Study of the Effect of Hydrogen on Fatigue Crack Initiation in Polycrystalline Nickel
Aug 2019
Publication
Correlating hydrogen embrittlement phenomenon with the metallic microstructural features holds the key for developing metals resistant to hydrogen-based failures. In case of fatigue failure of hydrogen charged metals in addition to the hydrogen-based failure mechanisms associated with monotonic loading such as HELP HEDE etc. microstructural features such as grain size type of grain boundary (special/random) fraction of special grain boundaries; their network and triple junctions can play a complex role. The probable sites for fatigue crack initiation in such metals can be identified as the sites of highest hydrogen concentration or accumulated plastic strain. To this end we have developed an experimental framework based on in-situ fatigue crack initiation and propagation studies under scanning electron microscope (SEM) to identify the weakest link in the metallic microstructure leading to failure. In-situ fatigue experiments are performed on carefully designed polycrystalline nickel (99.95% pure) specimens (miniaturised shallow-notched & electro-polished) using a 10 kN fatigue stage inside the SEM. Electron Back Scattering Diffraction (EBSD) map of the notched region surface helps identify the distribution of special/random grain boundaries triple junctions and grain orientation. The specimen surface in the shallow notched region for both the hydrogen charged and un-charged specimens are then carefully studied to correlate the microstructural feature associated with fatigue crack initiation sites. Such correlation of the fatigue crack initiation site and microstructural feature is further corroborated with the knowledge of hydrogen trapping and grain’s elastic anisotropicity to be either the site of high hydrogen concentration accumulated plastic slip or both.
Failure Analysis of Cooling Duct of Top Engine Cowl Panel of Fighter Aircraft
Jun 2019
Publication
Present work describes the failure analysis of cooling duct of a fighter aircraft. The analyzed chemical composition of cooling duct indicates that it is manufactured from Al-based alloy (AA 3003 or its equivalent). Microstructure of cooling duct displays the presence of two phases namely matrix and insoluble particles. The hardness values at different locations within damaged area of cooling duct reflect nearly same and consistent. The fracture surface of the cooling duct exhibits transgranular features and cracks with little branching. The analyzed hydrogen content in cooling duct is significantly higher (∼ 12 ppm) than the specified one (< 1 ppm). However the alloy used to fabricate cooling duct is not susceptible to typical hydrogen embrittlement. This shows hydrogen pick up during operation. The presence of cracks with branching does reflect features of hydrogen embrittlement. In addition striations indicative of fatigue features are also observed. It thus appears that the cooling duct has failed due to pick up of large amount of hydrogen as well as vibrational fatigue.
Modelling of Fatigue Crack Initiation in Hydrogen Charged Polycrystalline Nickel
Jun 2019
Publication
Hydrogen Embrittlement (HE) leads to deterioration of the fracto-mechanical properties of metals. In spite of vast literature it is still not clearly understood and demands significant research on this topic. For better understanding of the hydrogen effect on fatigue behaviour of metals present work focuses on developing a computational framework for fatigue crack initiation studies in metals in the presence of hydrogen. The developed framework consists of a nonlocal crystal plasticity model coupled with hydrogen transport model to study the fatigue behaviour of hydrogen charged metals. The nonlocal crystal plasticity model accounts for the statistically stored dislocations (SSDs) and geometrically necessary dislocations (GNDs) in polycrytalline metal. Hydrogen transport model on the other hand accounts for diffusion and trapping behavior of hydrogen due to concentration gradient pressure gradient plastic strain-rate with dislocations as the only trapping sites along the slip systems. A polycrystalline representative volume element (RVE) with periodic boundary conditions is used in this study. Fatigue crack initiation criterion is proposed for the simulated RVE with controlled microstructure by considering a critical value of the fatigue indicator parameter (FIP). FIP is formulated based on the experimental observations of several crack initiation sites along the grain boundaries their normal direction with respect to loading direction and the accumulated plastic strain in nickel polycrystalline samples. Developed simulation framework correctly accounts cyclic stress-strain behavior and multiple fatigue crack initiation sites observed experimentally in the presence of hydrogen.
Energy, Exergy, and Environmental Analyses of Renewable Hydrogen Production Through Plasma Gasification of Microalgal Biomass
Feb 2021
Publication
In this study an energy exergy and environmental (3E) analyses of a plasma-assisted hydrogen production process from microalgae is investigated. Four different microalgal biomass fuels namely raw microalgae (RM) and three torrefied microalgal fuels (TM200 TM250 and TM300) are used as the feedstock for steam plasma gasification to generate syngas and hydrogen. The effects of steam-tobiomass (S/B) ratio on the syngas and hydrogen yields and energy and exergy efficiencies of plasma gasification (hEn;PG hEx;PG) and hydrogen production(hEn;H2 hEx;H2 ) are taken into account. Results show that the optimal S/B ratios of RM TM200 TM250 and TM300 are 0.354 0.443 0.593 and 0.760 respectively occurring at the carbon boundary points (CBPs) where the maximum values of hEn;PG hEx;PG hEn;H2 and hEx;H2 are also achieved. At CBPs torrefied microalgae as feedstock lower thehEn;PG hEx;PG hEn;H2 and hEx;H2 because of their improved calorific value after undergoing torrefaction and the increased plasma energy demand compared to the RM. However beyond CBPs the torrefied feedstock displays better performance. A comparative life cycle analysis indicates that TM300 exhibits the highest greenhouse gases (GHG) emissions and the lowest net energy ratio (NER) due to the indirect emissions associated with electricity consumption.
Hydrogen Production by PEM Water Electrolysis – A Review
Mar 2019
Publication
Hydrogen is the most efficient energy carrier. Hydrogen can be obtained from different sources of raw materials including water. Among many hydrogen production methods eco-friendly and high purity of hydrogen can be obtained by water electrolysis. However In terms of sustainability and environmental impact PEM water electrolysis was considered as most promising techniques for high pure efficient hydrogen production from renewable energy sources and emits only oxygen as byproduct without any carbon emissions. Moreover the produced hydrogen (H2) and oxygen (O2) directly used for fuel cell and industrial applications. However overall water splitting resulting in only 4% of global industrial hydrogen being produced by electrolysis of water mainly due to the economic issues. Nowadays increased the desire production of green hydrogen has increased the interest on PEM water electrolysis. Thus the considerable research has been completed recently in the development of cost effective electrocatalysts for PEM water electrolysis. In this present review we discussed about the recent developments in the PEM water electrolysis including high performance low cost HER and OER electrocatalysts and their challenges new and old related to electrocatalysts and PEM cell components also addressed. This review will contribute further research improvements and a road map in order to support in developing the PEM water electrolyser as a commercially feasible hydrogen production purpose.
Overview of Biomass Conversion to Electricity and Hydrogen and Recent Developments in Low-Temperature Electrochemical Approaches
Nov 2020
Publication
Biomass is plant or animal material that stores both chemical and solar energies and that is widely used for heat production and various industrial processes. Biomass contains a large amount of the element hydrogen so it is an excellent source for hydrogen production. Therefore biomass is a sustainable source for electricity or hydrogen production. Although biomass power plants and reforming plants have been commercialized it remains a difficult challenge to develop more effective and economic technologies to further improve the conversion efficiency and reduce the environmental impacts in the conversion process. The use of biomass-based flow fuel cell technology to directly convert biomass to electricity and the use of electrolysis technology to convert biomass into hydrogen at a low temperature are two new research areas that have recently attracted interest. This paper first briefly introduces traditional technologies related to the conversion of biomass to electricity and hydrogen and then reviews the new developments in flow biomass fuel cells (FBFCs) and biomass electrolysis for hydrogen production (BEHP) in detail. Further challenges in these areas are discussed.
Microbial Fuel Cells: Technologically Advanced Devices and Approach for Sustainable/renewable Energy Development
Dec 2021
Publication
There is a huge quantity of energy needs/demands for multiple developmental and domestic activities in the modern era. And in this context consumption of more non-renewable energy is reported and created many problems or issues (availability of fossil fuel stocks in the future period causes a huge quantity of toxic gases or particles or climatic change effects) at the global level. And only sustainable or renewable fuel development can provide alternate fuel and we report from various biological agents processes including microbial biofuel cell applications for future energy needs only. These will not cause any interference in natural resources or services. Microbial biofuel cells utilize the living cell to produce bioelectricity via bioelectrochemical system. It can drive electricity or other energy generation currents via lived cell interaction. Microbial fuel cells (MFCs) and enzymatic biofuel cells with their advancement in design can improve sustainable bio-energy production by proving an efficient conversion system compared to chemical fuels into electric power. Different types of MFCs operation are reported in wastewater treatment with biogas biohydrogen and other biofuel/energy generation. Later biogas can convert into electric power. Hybrid microbial biofuel cell utility with photochemical reaction is found for electricity generation. Recent research and development in microbial biofuel design and its application will emphasize bioenergy for the future.
Phase Field Modelling of Formation and Fracture of Expanding Precipitates
May 2017
Publication
It is a common belief that embedded expanding inclusions are subjected to an internal homogeneous compressive hydrostatic stress. Still cracks that appear in precipitates that occupy a larger volume than the original material are frequently observed. The appearance of cracks has since long been regarded as a paradox. In the present study it is shown that matrix materials that increases its volume even several percent during the precipitation process develop a tensile hydrostatic stress in the centre of the precipitate. This is the result of a complicated mechanical-chemical phase transformation process. The process is here studied using a Landau phase feld model. Before the material is transformed and incorporated in a precipitate it undergoes stretching beyond the elastic strain limit because of the presence of already expanded material. During the phase transformation the accompanying volumetric expansion cannot be fully accommodated which instead creates an internal compressive stress and adds tension in the surrounding material. As the growth of the precipitate proceeds a region with increasing tensile stress develops in the interior of the precipitate. This is suggested to be the most probable cause of the observed cracks. First the mechanics that lead to the tension is computed. The infuence of elastic-plastic properties is studied both for cases both with and without cracks. The growth history from microscopic to macroscopic precipitates is followed and the result is compared with observations of so called hydride blisters that are formed on surfaces of zirconium alloys in the presence of hydrogen. A common practical situation is when the zirconium is in contact with an object of lower temperature. Then the cooled spot attracts hydrogen that make the zirconium transform to a metal hydride with the shape of a blister. The simulations predicts a final size and position of the growing crack that compares well with the experimental observations.
Blind-prediction: Estimating the Consequences of Vented Hydrogen Deflagrations for Homogeneous Mixtures in a 20-foot ISO Container
Sep 2017
Publication
Trygve Skjold,
Helene Hisken,
Sunil Lakshmipathy,
Gordon Atanga,
Marco Carcassi,
Martino Schiavetti,
James R. Stewart,
A. Newton,
James R. Hoyes,
Ilias C. Tolias,
Alexandros G. Venetsanos,
Olav Roald Hansen,
J. Geng,
Asmund Huser,
Sjur Helland,
Romain Jambut,
Ke Ren,
Alexei Kotchourko,
Thomas Jordan,
Jérome Daubech,
Guillaume Lecocq,
Arve Grønsund Hanssen,
Chenthil Kumar,
Laurent Krumenacker,
Simon Jallais,
D. Miller and
Carl Regis Bauwens
This paper summarises the results from a blind-prediction study for models developed for estimating the consequences of vented hydrogen deflagrations. The work is part of the project Improving hydrogen safety for energy applications through pre-normative research on vented deflagrations (HySEA). The scenarios selected for the blind-prediction entailed vented explosions with homogeneous hydrogen-air mixtures in a 20-foot ISO container. The test program included two configurations and six experiments i.e. three repeated tests for each scenario. The comparison between experimental results and model predictions reveals reasonable agreement for some of the models and significant discrepancies for others. It is foreseen that the first blind-prediction study in the HySEA project will motivate developers to improve their models and to update guidelines for users of the models.
Effect of Hydrogen on Short Crack Propagation in SA508 Grade 3 Class I Low Alloy Steel Under Cyclic Loading
Aug 2019
Publication
The effect of hydrogen on short crack propagation under cyclic loading in SA508 Grade 3 Class I low alloy steel is investigated. This low alloy steel is used in manufacturing of pressure vessel installed in Indian nuclear power plants. During operation these pressure vessels are subjected to continuous supply of pressurized hot water at 600 K and hence are susceptible to hydrogen embrittlement. In past research has been conducted on the effect of hydrogen embrittlement on long fatigue crack propagation in this material but the mechanistic understanding and correlation of hydrogen embrittlement with microstructural features in the material can be understood well by studying the effect of hydrogen embrittlement on short fatigue crack propagation. Short fatigue cracks are of the order of 10 µm to 1 mm and unlike long cracks these short cracks strongly interact with the microstructural features in the material such as grain/phase boundaries. The effect of hydrogen embrittlement on short crack propagation is studied by artificial hydrogen charging of the material through electrochemical process. The single edge notch tension (SENT) specimens with an initial notch of the order of 85 to 90 µm are used to study the short crack propagation. The short cracks in hydrogen charged samples initiated from the notch at lower number of loading cycles as compared to the uncharged notched samples for the same value of applied stress range (Δσ). After initiation the short fatigue crack in hydrogen charged samples propagated at higher rate as compared to uncharged samples. This dissimilarity in crack propagation behavior is due to the difference in the interaction of short fatigue crack with the microstructural features for a hydrogen charged and uncharged samples.
Reversible Hydrogen Storage Using Nanocomposites
Jul 2020
Publication
In the field of energy storage recently investigated nanocomposites show promise in terms of high hydrogen uptake and release with enhancement in the reaction kinetics. Among several carbonaceous nanovariants like carbon nanotubes (CNTs) fullerenes and graphitic nanofibers reveal reversible hydrogen sorption characteristics at 77 K due to their van der Waals interaction. The spillover mechanism combining Pd nanoparticles on the host metal-organic framework (MOF) show room temperature uptake of hydrogen. Metal or complex hydrides either in the nanocomposite form and its subset nanocatalyst dispersed alloy phases illustrate the concept of nanoengineering and nanoconfinement of particles with tailor-made properties for reversible hydrogen storage. Another class of materials comprising polymeric nanostructures such as conducting polyaniline and their functionalized nanocomposites are versatile hydrogen storage materials because of their unique size high specific surface-area pore-volume and bulk properties. The salient features of nanocomposite materials for reversible hydrogen storage are reviewed and discussed.
Cost Optimization of a Stand-Alone Hybrid Energy System with Fuel Cell and PV
Mar 2020
Publication
Renewable energy has become very popular in recent years. The amount of renewable generation has increased in both grid-connected and stand-alone systems. This is because it can provide clean energy in a cost-effective and environmentally friendly fashion. Among all varieties photovoltaic (PV) is the ultimate rising star. Integration of other technologies with solar is enhancing the efficiency and reliability of the system. In this paper a fuel cell–solar photovoltaic (FC-PV)-based hybrid energy system has been proposed to meet the electrical load demand of a small community center in India. The system is developed with PV panels fuel cell an electrolyzer and hydrogen storage tank. Detailed mathematical modeling of this system as well as its operation algorithm have been presented. Furthermore cost optimization has been performed to determine ratings of PV and Hydrogen system components. The objective is to minimize the levelized cost of electricity (LCOE) of this standalone system. This optimization is performed in HOMER software as well as another tool using an artificial bee colony (ABC). The results obtained by both methods have been compared in terms of cost effectiveness. It is evident from the results that for a 68 MWh/yr of electricity demand is met by the 129 kW Solar PV 15 kW Fuel cell along with a 34 kW electrolyzer and a 20 kg hydrogen tank with a LPSP of 0.053%. The LCOE is found to be in 0.228 $/kWh. Results also show that use of more sophisticated algorithms such as ABC yields more optimized solutions than package programs such as HOMER. Finally operational details for FC-PV hybrid system using IEC 61850 inter-operable communication is presented. IEC 61850 information models for FC electrolyzer hydrogen tank were developed and relevent IEC 61850 message exchanges for energy management in FC-PV hybrid system are demonstrated.
Magnetron Sputter Deposited NiCu Alloy Catalysts for Production of Hydrogen Through Electrolysis in Alkaline Water
Jul 2018
Publication
NiCu alloy catalysts with varying composition for electrolysis in alkaline water have been prepared by DC magnetron co-sputtering under Ar gas environment at substrate bias of 60 V. Nanocrystallinity lattice parameters and grain size of the NiCu alloys have been measured by grazing incidence X-ray diffraction (GIXRD). Elemental and microstructural analysis of the NiCu alloy have been done by field emission scanning electron microscopy (FESEM) as well as transmission electron microscopy (TEM). To analyze the NiCu alloys activity towards hydrogen evolution reaction (HER) cyclic voltammetry measurements have been done in a 6 M KOH at room temperature and further HER activities have been correlated with the varying Cu concentration in NiCu alloy catalysts.
Tracking Hydrogen Embrittlement Using Short Fatigue Crack Behavior of Metals
Dec 2018
Publication
Understanding hydrogen embrittlement phenomenon that leads to deterioration of mechanical properties of metallic components is vital for applications involving hydrogen environment. Among these understanding the influence of hydrogen on the fatigue behaviour of metals is of great interest. Total fatigue life of a material can be divided into fatigue crack initiation and fatigue crack growth phase. While fatigue crack initiation can be linked with the propagation of short fatigue cracks the size of which is of the order of grain size (few tens of microns) that are generally not detectable by conventional crack detection techniques applicable for the long fatigue crack growth behaviour using conventional CT specimens. Extensive literature is available on hydrogen effect on long fatigue crack growth behaviour of metals that leads to the change in crack growth rate and the threshold stress intensity factor range (ΔKth). However it is the short fatigue crack growth behaviour that provides the fundamental understanding and correlation of the metallic microstructure with hydrogen embrittlement phenomenon. Short fatigue crack growth behaviour is characteristically different from long crack growth behaviour showing high propagation rate at much lower values than threshold stress intensity factor range as well as a strong dependency on the microstructural features such as grain boundaries phase boundaries and inclusions. To this end a novel experimental framework is developed to investigate the short fatigue crack behaviour of hydrogen charged materials involving in-situ observation of propagating short cracks coupled with image processing to obtain their da/dN vs a curves. Various metallic materials ranging from austenitic stainless steel (AISI 316L) to reactor pressure vessel steel (SA508 Grade 3 Class I low alloy steel) and line pipe steels (API 5L X65 & X80) are studied in this work.
Study of the Microstructural and First Hydrogenation Properties of TiFe Alloy with Zr, Mn and V as Additives
Jul 2021
Publication
In this paper we report the effect of adding Zr + V or Zr + V + Mn to TiFe alloy on microstructure and hydrogen storage properties. The addition of only V was not enough to produce a minimum amount of secondary phase and therefore the first hydrogenation at room temperature under a hydrogen pressure of 20 bars was impossible. When 2 wt.% Zr + 2 wt.% V or 2 wt.% Zr + 2 wt.% V + 2 wt.% Mn is added to TiFe the alloy shows a finely distributed Ti2Fe-like secondary phase. These alloys presented a fast first hydrogenation and a high capacity. The rate-limiting step was found to be 3D growth diffusion controlled with decreasing interface velocity. This is consistent with the hypothesis that the fast reaction is likely to be the presence of Ti2Fe-like secondary phases that act as a gateway for hydrogen.
Renewable Hydrogen Production from Butanol: A Review
Dec 2017
Publication
Hydrogen production from butanol is a promising alternative when it is obtained from bio-butanol or bio-oil due to the higher hydrogen content compared to other oxygenates such as methanol ethanol or propanol. Catalysts and operating conditions play a crucial role in hydrogen production. Ni and Rh are metals mainly used for butanol steam reforming oxidative steam reforming and partial oxidation. Additives such as Cu can improve catalytic activity in many folds. Moreover support–metal interaction and catalyst preparation technique also play a decisive role in the stability and hydrogen production capacity of catalyst. Steam reforming technique as an option is more frequently researched due to higher hydrogen production capability in comparison to other thermochemical techniques despite its endothermic nature. The use of the oxidative steam reforming and partial oxidation has the advantages of requiring less energy and longer stability of catalysts. However the hydrogen yield is less. This article brings together and examines the latest research on hydrogen production from butanol via steam reforming oxidative steam reforming and partial oxidation reactions. In addition the review examines a few thermodynamic studies based on sorption-enhanced steam reforming and dry reforming where there is potential for hydrogen extraction.
Insight into Anomalous Hydrogen Adsorption on Rare Earth Metal Decorated on 2 Dimensional Hexagonal Boron Nitride a Density Functional Theory Study
Mar 2020
Publication
Hydrogen interaction with metal atoms is of prime focus for many energy related applications like hydrogen storage hydrogen evolution using catalysis etc. Although hydrogen binding with many main group alkaline and transition metals is quite well understood its binding properties with lanthanides are not well reported. In this article by density functional theory studies we show how a rare earth metal cerium binds with hydrogen when decorated over a heteropolar 2D material hexagonal boron nitride. Each cerium adatom is found to bind eight hydrogen molecules which is a much higher number than has been reported for transition metal atoms. However the highest binding energy occurs at four hydrogen molecules. This anomaly therefore is investigated in the present article using first-principles calculations. The number density of hydrogen molecules adsorbed over the cerium adatom is explained by investigating the electronic charge volume interactions owing to a unique geometrical arrangement of the guest hydrogen molecules. The importance of geometrical encapsulation in enhancing electronic interactions is explained.
Hydrogen Production and Subsequent Adsorption/Desorption Process within a Modified Unitized Regenerative Fuel Cell
Apr 2019
Publication
For sustainable and incremental growth mankind is adopting renewable sources of energy along with storage systems. Storing surplus renewable energy in the form of hydrogen is a viable solution to meet continuous energy demands. In this paper the concept of electrochemical hydrogen storage in a solid multi-walled carbon nanotube (MWCNT) electrode integrated in a modified unitized regenerative fuel cell (URFC) is investigated. The method of solid electrode fabrication from MWCNT powder and egg white as an organic binder is disclosed. The electrochemical testing of a modified URFC with an integrated MWCNT-based hydrogen storage electrode is performed and reported. Galvanostatic charging and discharging was carried out and results analyzed to ascertain the electrochemical hydrogen storage capacity of the fabricated electrode. The electrochemical hydrogen storage capacity of the porous MWCNT electrode is found to be 2.47 wt% which is comparable with commercially available AB5-based hydrogen storage canisters. The obtained results prove the technical feasibility of a modified URFC with an integrated MWCNT-based hydrogen storage electrode which is the first of its kind. This is surelya step forward towards building a sustainable energy economy
The Effect of Iron on the Solubility Behavior of Hydrogen in Tantalum
Sep 2013
Publication
The separation storage and recovery of hydrogen are key requirements for the efficient development of advanced hydrogen fuel technologies. The ideal hydrogen separation membrane should have high hydrogen permeability and good mechanical properties at a range of temperatures and pressures. Tantalum is a potential candidate with highest permeability to hydrogen among pure materials for hydrogen separation membrane. Isothermal as well as isobaric PCT equilibrium studies have been done in the temperature range of 673 – 873 K and hydrogen pressure range of 0.60 – 1.20 atmospheres for pure Ta and its solid solution alloys with Fe in different compositions. Results are presented.
Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review
Jan 2022
Publication
Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size shape increased surface-to-volume ratio and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties such as significantly enhanced toughness mechanical strength and thermal/electrochemical conductivity. As a result of these advantages nanocomposites have been used in a variety of applications including catalysts electrochemical sensors biosensors and energy storage devices among others. This study focuses on the usage of several forms of carbon nanomaterials such as carbon aerogels carbon nanofibers graphene carbon nanotubes and fullerenes in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years notably in the car industry due to their cost-effectiveness eco-friendliness and long-cyclic durability. Further; we discuss the principles reaction mechanisms and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.
Experimental Investigation of the Effect of Hydrogen Addition on Combustion Performance and Emissions Characteristics of a Spark Ignition High Speed Gasoline Engine
Sep 2014
Publication
Considering energy crises and pollution problems today much work has been done for alternative fuels for fossil fuels and lowering the toxic components in the combustion products. Expert studies proved that hydrogen one of the prominent alternative energy source which has many excellent combustion properties that can be used for improving combustion and emissions performance of gasoline-fuelled spark ignition (SI) engines. This article experimentally investigated the performance and emission characteristics of a high speed single cylinder SI engine operating with different hydrogen gasoline blends. For this purpose the conventional carburetted high speed SI engine was modified into an electronically controllable engine with help of electronic control unit (ECU) which dedicatedly used to control the injection timings and injection durations of gasoline. Various hydrogen enrichment levels were selected to investigate the effect of hydrogen addition on engine brake mean effective pressure (Bmep) brake thermal efficiency volumetric efficiency and emission characteristics. The test results demonstrated that combustion performances fuel consumption and brake mean effective pressure were eased with hydrogen enrichment. The experimental results also showed that the brake thermal efficiency was higher than that for the pure gasoline operation. Moreover HC and CO emissions were all reduced after hydrogen enrichment.
Green-hydrogen Research: What Have We Achieved, and Where Are We Going? Bibliometrics Analysis
Jul 2022
Publication
In response to the global challenge of climate change 136 countries accounting for 90% of global GDP and 85% of the population have now set net-zero targets. A transition to net-zero will require the decarbonization of all sectors of the economy. Green-hydrogen produced from renewable energy sources poses little to no threat to the environment and increasing its production will support net-zero targets Our study examined the evolution of green-hydrogen research themes since the UN Sustainable Development Goals were adopted in 2015 by utilizing bibliographic couplings keyword co-occurrence and keyphrase analysis of 642 articles from 2016 to 2021 in the Scopus database. We studied bibliometrics indicators and temporal evolution of publications and citations patterns of open access the effect of author collaboration influential publications and top contributing countries. We also consider new indicators like publication views keyphrases topics with prominence and field weighted citation impact and Altmetrics to understand the research direction further. We find four major thematic distributions of green-hydrogen research based on keyword co-occurrence networks: hydrogen storage hydrogen production electrolysis and the hydrogen economy. We also find networks of four research clusters that provide new information on the journal’s contributions to green-hydrogen research. These are materials chemistry hydrogen energy and cleaner production applied energy and fuel cells. Most green-hydrogen research aligns with Affordable and Clean Energy (SDG 7) and Climate Action (SDG 13). The outcomes of policy decisions in the United States Europe India and China will profoundly impact green-hydrogen production and storage over the next five years. If these policies are implemented these countries will account for two-thirds of this growth. Asia will account for the most significant part and become the second-largest producer globally.
Recent Developments in State-of-the-art Hydrogen Energy Technologies – Review of Hydrogen Storage Materials
Jan 2023
Publication
Hydrogen energy has been assessed as a clean and renewable energy source for future energy demand. For harnessing hydrogen energy to its fullest potential storage is a key parameter. It is well known that important hydrogen storage characteristics are operating pressure-temperature of hydrogen hydrogen storage capacity hydrogen absorption-desorption kinetics and heat transfer in the hydride bed. Each application needs specific properties. Every class of hydrogen storage materials has a different set of hydrogenation characteristics. Hence it is required to understand the properties of all hydrogen storage materials. The present review is focused on the state-of– the–art hydrogen storage materials including metal hydrides magnesium-based materials complex hydride systems carbonaceous materials metal organic frameworks perovskites and materials and processes based on artificial intelligence. In each category of materials‘ discovery hydrogen storage mechanism and reaction crystal structure and recent progress have been discussed in detail. Together with the fundamental synthesis process latest techniques of material tailoring like nanostructuring nanoconfinement catalyzing alloying and functionalization have also been discussed. Hydrogen energy research has a promising potential to replace fossil fuels from energy uses especially from automobile sector. In this context efforts initiated worldwide for clean hydrogen production and its use via fuel cell in vehicles is much awaiting steps towards sustainable energy demand.
Enhanced Hydrogen Generation Efficiency of Methanol using Dielectric Barrier Discharge Plasma Methodology and Conducting Sea Water as an Electrode
Aug 2020
Publication
In this work methanol decomposition method has been discussed for the production of hydrogen gas with the application of plasma. A simple dielectric barrier discharge (DBD) plasma reactor was designed for this purpose with two types of electrode. The DBD plasma reactor was experimented by substituting one of the metal electrodes with feebly conducting sea water which yielded better efficiency in producing hydrogen gas. Experimental parameters such as; discharge voltage and time were varied by maintaining a discharge gap of 1.5 mm and the plasma discharge characteristics were studied. Filamentary type micro-discharges were found to be formed which was observed as numerous streamer clusters in the current waveform. Gas chromatographic study confirmed the production of hydrogen gas with residence time around 3.6 min. Although the concentration (%) of H2 was high (98.1 %) and consistent with copper electrode assembly the rate of formation and concentration was found to be the highest (98.7 %) for water electrode for specific discharge voltage. The energy efficiency was found to be 0.5 mol H2/kWh and 1.2 mol H2/kWh for metal (Cu) and water electrodes respectively. The electrode material significantly affects the plasma condition and hence the rate of hydrogen production. Compositional analysis of the water used as electrode showed a minimal change in the composition even after the completion of the experiment as compared to the untreated water. Methanol degradation study shows the presence of untreated methanol in the residue of the plasma reactor which has been confirmed from the absorption spectra.
Advanced Hydrogen Production through Methane Cracking: A Review
Jul 2015
Publication
Hydrogen is widely produced and used for our day-to-day needs. It has also the potential to be used as fuel for industry or can be used as an energy carrier for stationary power. Hydrogen can be produced by different processes like from fossil fuels (Steam methane reforming coal gasification cracking of natural gas); renewable resources (electrolysis wind etc.); nuclear energy (thermochemical water splitting). In this paper few processes have been discussed briefly. Cracking of methane has been given special emphasis in this review for production of hydrogen. There are mainly two types of cracking non-catalytic and catalytic. Catalytic cracking of methane is governed mainly by finding a suitable catalyst; its generation deactivation activation and filament formation for the adsorption of carbon particles (deposited on metal surface); study of metallic support which helps in finding active sites of the catalyst for the reaction to proceed easily. Non-catalytic cracking of methane is mainly based on thermal cracking. Moreover several thermal cracking processes with their reactor configurations have been discussed.
Performance of Common Rail Direct Injection (CRDi) Engine Using Ceiba Pentandra Biodiesel and Hydrogen Fuel Combination
Nov 2021
Publication
An existing diesel engine was fitted with a common rail direct injection (CRDi) facility to inject fuel at higher pressure in CRDi mode. In the current work rotating blades were incorporated in the piston cavity to enhance turbulence. Pilot fuels used are diesel and biodiesel of Ceiba pentandra oil (BCPO) with hydrogen supply during the suction stroke. Performance evaluation and emission tests for CRDi mode were carried out under different loading conditions. In the first part of the work maximum possible hydrogen substitution without knocking was reported at an injection timing of 15◦ before top dead center (bTDC). In the second part of the work fuel injection pressure (IP) was varied with maximum hydrogen fuel substitution. Then in the third part of the work exhaust gas recirculation (EGR) was varied to study the nitrogen oxides (NOx) generated. At 900 bar HC emissions in the CRDi engine were reduced by 18.5% and CO emissions were reduced by 17% relative to the CI mode. NOx emissions from the CRDi engine were decreased by 28% relative to the CI engine mode. At 20% EGR lowered the BTE by 14.2% and reduced hydrocarbons nitrogen oxide and carbon monoxide by 6.3% 30.5% and 9% respectively compared to the CI mode of operation.
Technologies and Policies to Decarbonize Global Industry: Review and Assessment of Mitigation Drivers Through 2070
Mar 2020
Publication
Jeffrey Rissman,
Chris Bataille,
Eric Masanet,
Nate Aden,
William R. Morrow III,
Nan Zhou,
Neal Elliott,
Rebecca Dell,
Niko Heeren,
Brigitta Huckestein,
Joe Cresko,
Sabbie A. Miller,
Joyashree Roy,
Paul Fennell,
Betty Cremmins,
Thomas Koch Blank,
David Hone,
Ellen D. Williams,
Stephane de la Rue du Can,
Bill Sisson,
Mike Williams,
John Katzenberger,
Dallas Burtraw,
Girish Sethi,
He Ping,
David Danielson,
Hongyou Lu,
Tom Lorber,
Jens Dinkel and
Jonas Helseth
Fully decarbonizing global industry is essential to achieving climate stabilization and reaching net zero greenhouse gas emissions by 2050–2070 is necessary to limit global warming to 2 °C. This paper assembles and evaluates technical and policy interventions both on the supply side and on the demand side. It identifies measures that employed together can achieve net zero industrial emissions in the required timeframe. Key supply-side technologies include energy efficiency (especially at the system level) carbon capture electrification and zero-carbon hydrogen as a heat source and chemical feedstock. There are also promising technologies specific to each of the three top-emitting industries: cement iron & steel and chemicals & plastics. These include cement admixtures and alternative chemistries several technological routes for zero-carbon steelmaking and novel chemical catalysts and separation technologies. Crucial demand-side approaches include material-efficient design reductions in material waste substituting low-carbon for high-carbon materials and circular economy interventions (such as improving product longevity reusability ease of refurbishment and recyclability). Strategic well-designed policy can accelerate innovation and provide incentives for technology deployment. High-value policies include carbon pricing with border adjustments or other price signals; robust government support for research development and deployment; and energy efficiency or emissions standards. These core policies should be supported by labeling and government procurement of low-carbon products data collection and disclosure requirements and recycling incentives. In implementing these policies care must be taken to ensure a just transition for displaced workers and affected communities. Similarly decarbonization must complement the human and economic development of low- and middle-income countries.
A Review of Renewable Hydrogen Generation and Proton Exchange Membrane Fuel Cell Technology for Sustainable Energy Development
Mar 2023
Publication
Beyond its typical usage as an economical fuel for creating ammonia methanol and petroleum refineries hydrogen has become a modern form of energy. Energy-scarce advanced countries like Japan and Korea are concerned about energy privacy and environmental responsibility. Many wealthy countries have been fervently building hydrogen networks and renewable energy sources to fulfil their main goals or the growing requirement for energy. In this study we concentrate on proton-exchange membrane fuel cells (PEMFCs) generally viewed as financially viable for vehicle industries especially for automobiles demanding less hydrogen infrastructure facilities like fleets of cabs buses and logistical automobiles. This overview includes all of the significant PEMFC components focusing on the reaction gas diffusion and polymer. Without question the equipment necessary for a consistent supply of ultra-pure hydrogen is essential for the effectiveness of PEMFC in extensive requests.
Alternative Vehicular Fuels for Environmental Decarbonization: A Critical Review of Challenges in Using Electricity, Hydrogen, and Biofuels as a Sustainable Vehicular Fuel
Jan 2023
Publication
Using vehicles powered by alternative fuels such as electricity hydrogen and biofuels have been envisioned as the ideal way to curb noxious vehicular emissions. However the availability of resources for the sustainable use of these alternative fuels the possible risks and their fate at the end of their life are frequently questioned necessitating a detailed assessment of factors influencing the use of all three alternative fuels for vehicular use. Though the vehicles powered by batteries and fuel cells are “locally” zero-emission vehicles (ZEVs) they have resource scarcity infrastructure limitations and are relatively expensive thus restricting their market penetration and consumer acceptance. Biofuels though can be used in the existing vehicles procuring the required amounts of feedstock and mitigating food-versus-fuel issues is still a challenge. Overcoming these challenges is a crucial and critical step for the sustained use of these alternative fuels as primary vehicular fuels. To accomplish this all these challenges need to be categorized and a comparative analysis among them is necessary to address them. This work can therefore serve as a ready reference for researchers and policy makers to take appropriate and informed decisions for long-term action to achieve the goals of the Paris agreement to reduce global temperature.
Artificial Intelligence/Machine Learning in Energy Management Systems, Control, and Optimization of Hydrogen Fuel Cell Vehicles
Mar 2023
Publication
Environmental emissions global warming and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand there has been significant progress in artificial intelligence machine learning and designing data-driven intelligent controllers. These techniques have found much attention within the community and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction control energy management and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve classify and compare and future trends and directions for sustainability are discussed.
Numerical 1-D Simulations on Single-Cylinder Stationary Spark Ignition Engine using Micro-Emulsions, Gasoline, and Hydrogen in Dual Fuel Mode
Mar 2022
Publication
This work is contributing towards reducing the emissions from stationary spark ignition engine single cylinder by adopting the state of the Art Technology Hydrogen fuel and H2O based Emulsion fuel in dual fuel mode. In addition comparing its combustion emissions and performance with conventional 100% Gasoline fuel. This research work has been done on 1-D AVL Boost Simulation Software by using the single cylinder engine model setup. The main objectives of this research work is to comply with the strict emission rules Euro VII. This work predicted the overall combustion parameters NOx CO and HC emissions as well as several performance measures like power torque BSFC and BMEP of stationary spark ignition engine test rig. Since Hydrogen is zero carbon emission based fuel so it is not creating any carbon-based emissions and has shown to be the most efficient source of energy. Although Hydrogen fuel showed no carbon emissions but NOx emissions were slightly higher than micro-emulsion fuel. Since Hydrogen fuel burns at very high temperature so it produced slightly more NOx emissions. The NOx emissions were 20% higher than emulsion fuel and 10% higher than Gasoline 100% fuel. The H2O based emulsion fuel is also investigated which helped in reducing the emissions and improved the performance of single-cylinder stationary spark Gasoline+ Micro-Emulsion +Hydrogen fuel Lower CO HC and NOx Emissions Improved Power Torque Bsfc & Pressure Constant Speed & variable Load ignition test rig. The Brake power BSFC BMEP & Torque were also investigated power and showed greater improvement for emulsion fuel. At 60% load the Hydrogen fuel showed 50% increase in power as compared to emulsion fuel and 38% more power than Gasoline fuel. Exhaust emissions CO HC were compared for gasoline and emulsion fuel. The CO emissions are 18% lower for micro-emulsion as compared to Gasoline 100% and HC emissions are 12.5% lower than gasoline 100% fuel at 20% load.
Stoichiometric Equilibrium Model based Assessment of Hydrogen Generation through Biomass Gasification
Sep 2016
Publication
Hydrogen produced from renewable energy sources is clean and sustainable. Biomass gasification has a significant role in the context of hydrogen generation from biomass. Assessment of the performance of biomass gasification process regarding the product gas yield and composition can be performed using mathematical models. Among the different mathematical models thermodynamic equilibrium models are simple and useful tools for the first estimate and preliminary comparison and assessment of gasification process. A stoichiometric thermodynamic equilibrium model is developed here and its performance is validated for steam gasification and air-steam gasification. The model is then used to assess the feasibility of different biomass feedstock for gasification based on hydrogen yield and lower heating value.
Fuel Cell Products for Sustainable Transportation and Stationary Power Generation: Review on Market Perspective
Mar 2023
Publication
The present day energy supply scenario is unsustainable and the transition towards a more environmentally friendly energy supply system of the future is inevitable. Hydrogen is a potential fuel that is capable of assisting with this transition. Certain technological advancements and design challenges associated with hydrogen generation and fuel cell technologies are discussed in this review. The commercialization of hydrogen-based technologies is closely associated with the development of the fuel cell industry. The evolution of fuel cell electric vehicles and fuel cell-based stationary power generation products in the market are discussed. Furthermore the opportunities and threats associated with the market diffusion of these products certain policy implications and roadmaps of major economies associated with this hydrogen transition are discussed in this review.
A Brief Review of Hydrogen Production Methods and Their Challenges
Jan 2023
Publication
Hydrogen is emerging as a new energy vector outside of its traditional role and gaining more recognition internationally as a viable fuel route. This review paper offers a crisp analysis of the most recent developments in hydrogen production techniques using conventional and renewable energy sources in addition to key challenges in the production of Hydrogen. Among the most potential renewable energy sources for hydrogen production are solar and wind. The production of H2 from renewable sources derived from agricultural or other waste streams increases the flexibility and improves the economics of distributed and semi-centralized reforming with little or no net greenhouse gas emissions. Water electrolysis equipment driven by off-grid solar or wind energy can also be employed in remote areas that are away from the grid. Each H2 manufacturing technique has technological challenges. These challenges include feedstock type conversion efficiency and the need for the safe integration of H2 production systems with H2 purification and storage technologies.
No more items...