Institution of Gas Engineers & Managers
How Far Away is Hydrogen? Its Role in the Medium and Long-term Decarbonisation of the European Energy System
Nov 2015
Publication
Hydrogen is a promising avenue for decarbonising energy systems and providing flexibility. In this paper the JRC-EU-TIMES model – a bottom-up technology-rich model of the EU28 energy system – is used to assess the role of hydrogen in a future decarbonised Europe under two climate scenarios current policy initiative (CPI) and long-term decarbonisation (CAP). Our results indicate that hydrogen could become a viable option already in 2030 – however a long-term CO2 cap is needed to sustain the transition. In the CAP scenario the share of hydrogen in the final energy consumption of the transport and industry sectors reaches 5% and 6% by 2050. Low-carbon hydrogen production technologies dominate and electrolysers provide flexibility by absorbing electricity at times of high availability of intermittent sources. Hydrogen could also play a significant role in the industrial and transport sectors while the emergence of stationary hydrogen fuel cells for hydrogen-to-power would require significant cost improvements over and above those projected by the experts.
3D Quantitative Risk Assessment on a Hydrogen Refuelling Station in Shanghai
Sep 2019
Publication
The number of hydrogen refuelling stations worldwide is growing rapidly in recent years. The first large capacity hydrogen refuelling station in China is under construction. A 3D quantitative risk assessment QRA）is conducted for this station. Hazards associated with hydrogen systems are identified. Leakage frequency of hydrogen equipment are analyzed. Jet flame explosion scenarios and corresponding accident consequences are simulated. Risk acceptance criteria for hydrogen refuelling stations are discussed. The results show that the risk of this refuelling station is acceptable. And the maximum lethality frequency is 6.3*10-6. The area around compressors has the greatest risk. People should be avoided as far as possible from the compressor when the compressor does not need to be maintained. With 3D QRA the visualization of the evaluation results will help stakeholders to observe the hazardous areas of the hydrogen refuelling station at a glance.
Near-term Location of Hydrogen Refueling Stations in Yokohama City from the Perspective of Safety
Sep 2019
Publication
The roll-out of hydrogen refuelling stations is a key step in the transition to a hydrogen economy. Since Japan has been shifting from the demonstration stage to the implementation stage of a hydrogen economy a near-term city-level roll-out plan is required. The aim of this study is to plan near-term locations for building hydrogen refuelling stations in Yokohama City from a safety perspective. Our planning provides location information for hydrogen refuelling stations in Yokohama City for the period 2020–2030. Mobile type and parallel siting type refuelling stations have been considered in our planning and locations were determined by matching supply and demand to safety concerns. Supply and demand were estimated from hybrid vehicle ownership data and from space availability in existing gas stations. The results reaffirmed the importance of hydrogen station location planning and showed that use of mobile type stations is a suitable solution in response to the uncertain fuel cell vehicle fuel demand level during the implementation stage of a hydrogen economy.
Chemical Utilization of Hydrogen from Fluctuating Energy Sources- Catalytic Transfer Hydrogenation from Charged Liquid Organic Hydrogen Carrier Systems
Nov 2015
Publication
Liquid Organic Hydrogen Carrier (LOHC) systems offer a very attractive way for storing and distributing hydrogen from electrolysis using excess energies from solar or wind power plants. In this contribution an alternative high-value utilization of such hydrogen is proposed namely its use in steady-state chemical hydrogenation processes. We here demonstrate that the hydrogen-rich form of the LOHC system dibenzyltoluene/perhydro-dibenzyltoluene can be directly applied as sole source of hydrogen in the hydrogenation of toluene a model reaction for large-scale technical hydrogenations. Equilibrium experiments using perhydro-dibenzyltoluene and toluene in a ratio of 1:3 (thus in a stoichiometric ratio with respect to H2) yield conversions above 60% corresponding to an equilibrium constant significantly higher than 1 under the applied conditions (270 °C).
Effect of the Time Dependent Loading of Type IV Cylinders Using a Multi-scalemodel
Sep 2019
Publication
The current requirements for composite cylinders are still based on an arbitrary approach derived from the behaviour of metal structures that the designed burst pressure should be at least 2.5 times the maximum in-service pressure. This could lead to an over-designed composite cylinder for which the weight saving would be less than optimum. Moreover predicting the lifetime of composite cylinders is a challenging task due to their anisotropic characteristics. A federal research institute in Germany (BAM) has proposed a minimum load-cycle requirement that mitigates this issue by using a MonteCarlo analysis of the burst test results. To enrich this study more experiments are required however they are normally limited by the necessity of long duration testing times (loading rate and number of cylinders) and the design (stacking sequence of the composite layer). A multi-scale model incorporating the micromechanical behaviour of composite structures has been developed at Mines ParisTech. The model has shown similar behaviour to that of composite cylinders under different loading rates. This indicates that the model could assist the Monte-Carlo analysis study. An evaluation of the multi-scale model therefore has been carried out to determine its limitations in predicting lifetimes of composite cylinders. The evaluation starts with the comparison of burst pressures with type IV composite cylinders under different loading rates. A μCT-Scan of a type IV cylinder has been carried out at the University of Southampton. The produced images were analysed using the Fast-Fourier Transform (FFT) technique to determine the configuration of the composite layers which is required by the model. Finally the time dependent effect studied by using the multi scale model has been described. In the long-term this study can be used to conduct a parametric study for creating more efficient design of type IV cylinders.
Numerical Modelling of Unconfined and Confined Hydrogen Explosion
Sep 2019
Publication
Numerical studies were conducted with the objective of gaining a better understanding of the consequences of potential explosion that could be associated with release of hydrogen in a confined and unconfined environment. This paper describes the work done by us in modelling explosion of accidental releases of hydrogen using our Fire Explosion Release Dispersion (FRED) software. CAM and SCOPE models in FRED is used for validation of congested/uncongested unconfined and congested/uncongested confined vapour cloud explosion respectively. In the first step CAM is validated against experiments of varying gas cloud size blockage ratio equivalence ratio of the mixture and blockage configuration. The model predictions of explosion overpressure are in good agreement with experiments. The results obtained from FRED i.e. overpressure as a function of distance match well in comparison to the experiments. In the second step SCOPE is validated against vented explosion experiments available in open literature. In general SCOPE reproduces the maximum overpressure within the factor of 2. Moreover it well predicts the trends of increase in overpressure with change in type of the fuel increase in number of obstacles blockage ratio and decrease in the vent size.
Hydrogen-fueled Car Fire Spread to Adjacent Vehicles in Car Parks
Sep 2019
Publication
Car park fires are known to be dangerous due to the risk of fast fire spread from one car to another. In general no fatalities are recorded in such fires but they may have a great cost in relation to damaged cars and structural repair. A very recent example is the Liverpool multi-storey car park fire from December 31 2017. It destroyed 1400 cars and parts of the building structure collapsed. This questions the validity of current design praxis of car parks. Literature studies assumes a 12 minutes period for the fire spread from one gasoline fuelled car to another. Statistical research and test from the European commission of steel structures states that in an open car park at most 3-4 vehicles are expected to be on fire at the same time.<br/>A number of investigations have been made concerning vehicles performance in car park fires but only a few are concerned with hydrogen-fuelled vehicles (HFV). It is therefore important to investigate how these new vehicles may contribute to potential fire spread scenario. The aim of the paper is to report the outcome of car park fire spread simulations involving common fuelled and hydrogen fuelled cars. The case study is based on a typical car park found in Denmark. The simulation applied numerical models implemented in the Fire Dynamic Simulator (FDS). In particular the focus of the study is on the influence of the parking distance to fire spread to adjacent vehicles in case a TPRD is activated during a car fire. The results help understanding whether different design rules should be envisaged for such structures or how a sufficient safety level can be obtained by ensuring specific parking condition for the hydrogen-fuelled cars.
Cryogenic Hydrogen Jets: Flammable Envelope Size and Hazard Distances for Jet Fire
Sep 2019
Publication
Engineering tools for calculation of hazard distances for cryogenic hydrogen jets are currently missing. This study aims at the development of validated correlations for calculation of hazard distances for cryogenic unignited releases and jet fires. The experiments performed by Sandia National Laboratories (SNL) on jets from storage temperature in the range 46-295 K and pressure up to 6 bar abs are used to expand the validation domain of the correlations. The Ulster’s under-expanded jet theory is applied to calculate parameters at the real nozzle exit. The similarity law for concentration decay in momentum-dominated jets is shown to be capable to reproduce experimental data of SNL on 9 unignited cryogenic releases. The accuracy of the similarity law to predict experimentally measured axial concentration decay improves with the increase of the release diameter. This is thought due to decrease of the effect of friction and minor losses for large release orifices. The dimensionless flame length correlation is applied to analyse 30 cryogenic jet fire tests. The deviation of calculated flame length from measured in experiments is mostly within acceptable accuracy for engineering correlations 20% similarly to releases from storage and equipment at atmospheric temperatures. It is concluded that the similarity law and the dimensionless flame correlation can be used as universal engineering tools for calculation of hazard distances for hydrogen releases at any storage temperature including cryogenic.
Minimum Entropy Generation in a Heat Exchanger in the Cryogenic Part of the Hydrogen Liquefaction Process: On the Validity of Equipartition and Disappearance of the Highway
May 2019
Publication
Liquefaction of hydrogen is a promising technology for transporting large quantities of hydrogen across long distances. A key challenge is the high power consumption. In this work we discuss refrigeration strategies that give minimum entropy production/exergy destruction in a plate-fin heat exchanger that cools the hydrogen from 47.8 K to 29.3 K. Two reference cases are studied; one where the feed stream enters at 20 bar and one where it enters at 80 bar. Catalyst in the hot layers speeds up the conversion of ortho-to para-hydrogen. Optimal control theory is used to formulate a minimization problem where the objective function is the total entropy production the control variable is the temperature of the refrigerant and the constrains are the balance equations for energy mass and momentum in the hot layers. The optimal refrigeration strategies give a reduction of the total entropy production of 8.7% in the 20-bar case and 4.3% in the 80-bar case. The overall heat transfer coefficient and duty is higher in the 20 bar case which compensates for the increase in entropy production due to a thermal mismatch that is avoided in the 80 bar case. This leads the second law efficiency of the 20 bar case (91%) to be similar to the 80 bar case (89%). We demonstrate that equipartition of the entropy production and equipartition of the thermal driving force are both excellent design principles for the process unit considered with total entropy productions deviating only 0.2% and 0.5% from the state of minimum entropy production. Equipartition of the thermal driving force i.e. a constant difference between the inverse temperatures of the hot and cold layers represents a particularly simple guideline that works remarkably well. We find that both heat transfer and the spin-isomer reaction contribute significantly to the entropy production throughout the length of the process unit. Unlike previous examples in the literature the process unit considered in this work is not characterized by a “reaction mode” at the inlet followed by a “heat transfer mode”. Therefore it does not follow a highway in state space i.e. a band that is particularly dense with energy efficient solutions. By artificially increasing the spin-isomer conversion rate the highway appears when the conversion rate becomes sufficiently high.
The New Oil? The Geopolitics and International Governance of Hydrogen
Jun 2020
Publication
While most hydrogen research focuses on the technical and cost hurdles to a full-scale hydrogen economy little consideration has been given to the geopolitical drivers and consequences of hydrogen developments. The technologies and infrastructures underpinning a hydrogen economy can take markedly different forms and the choice over which pathway to take is the object of competition between different stakeholders and countries. Over time cross-border maritime trade in hydrogen has the potential to fundamentally redraw the geography of global energy trade create a new class of energy exporters and reshape geopolitical relations and alliances between countries. International governance and investments to scale up hydrogen value chains could reduce the risk of market fragmentation carbon lock-in and intensified geo-economic rivalry.
Acoustic Emission Characteristics of Used 70 MPa Type IV Hydrogen Storage Tanks During Hydrostatic Burst Tests
Sep 2019
Publication
Currently the periodic inspection of composite tanks is typically achieved via hydrostatic test combined with internal and external visual inspections. Acoustic emission (AE) technology demonstrates a promising non destructive testing method for damage mode identification and damage assessment. This study focuses on AE signals characteristics and evolution behaviours for used 70 MPa Type IV hydrogen storage tanks during hydrostatic burst tests. AE-based tensile tests for epoxy resin specimen and carbon fiber tow were implemented to obtain characteristics of matrix cracking and fiber breakage. Then broadband AE sensors were used to capture AE signals during multi-step loading tests and hydrostatic burst tests. K-means ++ algorithm and wavelet packet transform are performed to cluster AE signals and verify the validity. Combining with tensile tests three clusters are manifested via matrix cracking fiber/matrix debonding and fiber breakage according to amplitude duration counts and absolute energy. The number of three clustering signals increases with the increase of pressure showing accumulated and aggravated damage. The sudden appearance of a large number of fiber breakage signals during hydrostatic burst tests suggests that the composite tank structure is becoming mechanically unstable namely the impending burst failure of the tank.
Commercialisation of Energy Storage
Mar 2015
Publication
This report was created to ensure a deeper understanding of the role and commercial viability of energy storage in enabling increasing levels of intermittent renewable power generation. It was specifically written to inform thought leaders and decision-makers about the potential contribution of storage in order to integrate renewable energy sources (RES) and about the actions required to ensure that storage is allowed to compete with the other flexibility options on a level playing field.<br/>The share of RES in the European electric power generation mix is expected to grow considerably constituting a significant contribution to the European Commission’s challenging targets to reduce greenhouse gas emissions. The share of RES production in electricity demand should reach about 36% by 2020 45-60% by 2030 and over 80% in 2050.<br/>In some scenarios up to 65% of EU power generation will be covered by solar photovoltaics (PV) as well as on- and offshore wind (variable renewable energy (VRE) sources) whose production is subject to both seasonal as well as hourly weather variability. This is a situation the power system has not coped with before. System flexibility needs which have historically been driven by variable demand patterns will increasingly be driven by supply variability as VRE penetration increases to very high levels (50% and more).<br/>Significant amounts of excess renewable energy (on the order of TWh) will start to emerge in countries across the EU with surpluses characterized by periods of high power output (GW) far in excess of demand. These periods will alternate with times when solar PV and wind are only generating at a fraction of their capacity and non-renewable generation capacity will be required.<br/>In addition the large intermittent power flows will put strain on the transmission and distribution network and make it more challenging to ensure that the electricity supply matches demand at all times.<br/>New systems and tools are required to ensure that this renewable energy is integrated into the power system effectively. There are four main options for providing the required flexibility to the power system: dispatchable generation transmission and distribution expansion demand side management and energy storage. All of these options have limitations and costs and none of them can solve the RES integration challenge alone. This report focuses on the question to what extent current and new storage technologies can contribute to integrate renewables in the long run and play additional roles in the short term.
Blind-prediction: Estimating the Consequences of Vented Hydrogen Deflagrations for Homogeneous Mixtures in a 20-foot ISO Container
Sep 2017
Publication
Trygve Skjold,
Helene Hisken,
Sunil Lakshmipathy,
Gordon Atanga,
Marco Carcassi,
Martino Schiavetti,
James R. Stewart,
A. Newton,
James R. Hoyes,
Ilias C. Tolias,
Alexandros G. Venetsanos,
Olav Roald Hansen,
J. Geng,
Asmund Huser,
Sjur Helland,
Romain Jambut,
Ke Ren,
Alexei Kotchourko,
Thomas Jordan,
Jérome Daubech,
Guillaume Lecocq,
Arve Grønsund Hanssen,
Chenthil Kumar,
Laurent Krumenacker,
Simon Jallais,
D. Miller and
Carl Regis Bauwens
This paper summarises the results from a blind-prediction study for models developed for estimating the consequences of vented hydrogen deflagrations. The work is part of the project Improving hydrogen safety for energy applications through pre-normative research on vented deflagrations (HySEA). The scenarios selected for the blind-prediction entailed vented explosions with homogeneous hydrogen-air mixtures in a 20-foot ISO container. The test program included two configurations and six experiments i.e. three repeated tests for each scenario. The comparison between experimental results and model predictions reveals reasonable agreement for some of the models and significant discrepancies for others. It is foreseen that the first blind-prediction study in the HySEA project will motivate developers to improve their models and to update guidelines for users of the models.
Hydrogen Embrittlement: Future Directions—Discussion
Jun 2017
Publication
The final session of the meeting consisted of a discussion panel to propose future directions for research in the field of hydrogen embrittlement and the potential impact of this research on public policy.
This article is a transcription of the recorded discussion of ‘Hydrogen Embrittlement: Future Directions’ at the Royal Society Scientific Discussion Meeting Challenges of Hydrogen and Metals Jan 16th–18th 2017. The text is approved by the contributors. H.L. transcribed the session and drafted the manuscript. Y.C. assisted in the preparation of the manuscript.
Link to document download on Royal Society Website
This article is a transcription of the recorded discussion of ‘Hydrogen Embrittlement: Future Directions’ at the Royal Society Scientific Discussion Meeting Challenges of Hydrogen and Metals Jan 16th–18th 2017. The text is approved by the contributors. H.L. transcribed the session and drafted the manuscript. Y.C. assisted in the preparation of the manuscript.
Link to document download on Royal Society Website
Carbon Capture and Storage Could Clear a Path to the UK's Carbon Reduction Targets: An ETI Technology Programme Highlight Report
Sep 2014
Publication
Capturing and sealing away carbon dioxide released from industrial processes and electricity generation is acknowledged internationally to be potentially a winning intervention in the battle against climate change. The collected technologies that make up Carbon Capture and Storage (CCS) could remove more than 90% of the carbon emissions from energy intensive industries and electricity production. In power generation CCS not only provides low-carbon output but it also preserves capacity in fossil fuel-fired plant to respond to shifts in demand. This is a near-unique combination that could mitigate the different shortcomings of harnessing the wind the sun or nuclear fission.<br/>CCS could clear a path to the UK’s carbon reduction targets; secure its energy supplies; and reduce the cost of those achievements. With CCS in play a low-carbon future with secure energy supplies becomes affordable. However without our research has found that the costs of meeting the UK’s lowcarbon targets could double to £60bn a year by 2050 at today’s prices.<br/>However CCS has to be honed technically and commercially before it can become a reality. ETI supported by its partners has made important progress and continues to do so.
Bioanode as a Limiting Factor to Biocathode Performance in Microbial Electrolysis Cells
Mar 2017
Publication
The bioanode is important for a microbial electrolysis cell (MEC) and its robustness to maintain its catalytic activity affects the performance of the whole system. Bioanodes enriched at a potential of +0.2 V (vs. standard hydrogen electrode) were able to sustain their oxidation activity when the anode potential was varied from -0.3 up to +1.0 V. Chronoamperometric test revealed that the bioanode produced peak current density of 0.36 A/m2 and 0.37 A/m2 at applied potential 0 and +0.6 V respectively. Meanwhile hydrogen production at the biocathode was proportional to the applied potential in the range from -0.5 to -1.0 V. The highest production rate was 7.4 L H2/(m2 cathode area)/day at -1.0 V cathode potential. A limited current output at the bioanode could halt the biocathode capability to generate hydrogen. Therefore maximum applied potential that can be applied to the biocathode was calculated as -0.84 V without overloading the bioanode.
Pathways to Hydrogen as an Energy Carrier
Feb 2007
Publication
When hydrogen is used as an alternative energy carrier it is very important to understand the pathway from the primary energy source to the final use of the carrier. This involves for example the understanding of greenhouse gas emissions associated with the production of hydrogen and throughout the lifecycle of a given utilization pathway as well as various energy or exergy1 efficiencies and aspects involved. This paper which is based on a talk given at the Royal Society in London assesses and reviews the various production pathways for hydrogen with emphasis on emissions energy use and energy efficiency. The paper also views some aspects of the breaking of the water molecule and examines some new emerging physical evidence which could pave the way to a new and more feasible pathway.
Link to document download on Royal Society Website
Link to document download on Royal Society Website
Understanding and Mitigating Hydrogen Embrittlement of Steels: A Review of Experimental, Modelling and Design Progress from Atomistic to Continuum
Feb 2018
Publication
Hydrogen embrittlement is a complex phenomenon involving several lengthand timescales that affects a large class of metals. It can significantly reduce the ductility and load-bearing capacity and cause cracking and catastrophic brittle failures at stresses below the yield stress of susceptible materials. Despite a large research effort in attempting to understand the mechanisms of failure and in developing potential mitigating solutions hydrogen embrittlement mechanisms are still not completely understood. There are controversial opinions in the literature regarding the underlying mechanisms and related experimental evidence supporting each of these theories. The aim of this paper is to provide a detailed review up to the current state of the art on the effect of hydrogen on the degradation of metals with a particular focus on steels. Here we describe the effect of hydrogen in steels from the atomistic to the continuum scale by reporting theoretical evidence supported by quantum calculation and modern experimental characterisation methods macroscopic effects that influence the mechanical properties of steels and established damaging mechanisms for the embrittlement of steels. Furthermore we give an insight into current approaches and new mitigation strategies used to design new steels resistant to hydrogen embrittlement.<br/>*Correction published see Supplements section
Effect of Gasoline Pool Fire on Liquid Hydrogen Storage Tank in Hybrid Hydrogen-gasoline Fueling Station
Nov 2015
Publication
Multiple-energy-fuelling stations which can supply several types of energy such as gasoline CNG and hydrogen could guarantee the efficient use of space. To guide the safety management of hybrid hydrogen–gasoline fuelling stations which utilize liquid hydrogen as an energy carrier the scale of gasoline pool fires was estimated using the hazard assessment tool Toxic Release Analysis of Chemical Emissions (TRACE). Subsequently the temperature and the stress due to temperature distribution were estimated using ANSYS. Based on the results the safety of liquid hydrogen storage tanks was discussed. It was inferred that the emissivity of the outer material of the tank and the safety distance between liquid hydrogen storage tanks and gasoline dispensers should be less than 0.2 and more than 8.5 m respectively to protect the liquid hydrogen storage tank from the gasoline pool fire. To reduce the safety distance several measures are required e.g. additional thermal shields such as protective intumescent paint and water sprinkler systems and an increased slope to lead gasoline off to a safe domain away from the liquid hydrogen storage tank
Dispersion of Cryogenic Hydrogen Through High-aspect Ratio Nozzles
Sep 2019
Publication
Liquid hydrogen is increasingly being used as a delivery and storage medium for stations that provide compressed gaseous hydrogen for fuel cell electric vehicles. In efforts to provide scientific justification for separation distances for liquid hydrogen infrastructure in fire codes the dispersion characteristics of cryogenic hydrogen jets (50–64 K) from high aspect ratio nozzles have been measured at 3 and 5 barabs stagnation pressures. These nozzles are more characteristic of unintended leaks which would be expected to be cracks rather than conventional round nozzles. Spontaneous Raman scattering was used to measure the concentration and temperature field along the major and minor axes. Within the field of interrogation the axis-switching phenomena was not observed but rather a self-similar Gaussian-profile flow regime similar to room temperature or cryogenic hydrogen releases through round nozzles. The concentration decay rate and half-widths for the planar cryogenic jets were found to be nominally equivalent to that of round nozzle cryogenic hydrogen jets indicating a similar flammable envelope. The results from these experiments will be used to validate models for cryogenic hydrogen dispersion that will be used for simulations of alternative scenarios and quantitative risk assessment
No more items...