Publications
Modelling Flexibility Requirements in Deep Decarbonisation Scenarios: The Role of Conventional Flexibility and Sector Coupling Options in the European 2050 Energy System
Feb 2024
Publication
Russia’s invasion of Ukraine has reaffirmed the importance of scaling up renewable energy to decarbonise Europe’s economy while rapidly reducing its exposure to foreign fossil fuel suppliers. Therefore the question of sources of flexibility to support a fully decarbonised European energy system is becoming even more critical in light of a renewable-dominated energy system. We developed and used a Pan-European energy system model to systematically assess and quantify sources of flexibility to meet deep decarbonisation targets. The electricity supply sector and electricity-based end-use technologies are crucial in achieving deep decarbonisation. Other low-carbon energy sources like biomethane hydrogen synthetic e-fuels and bioenergy with carbon capture and storage will also play a role. To support a fully decarbonised European energy system by 2050 both temporal and spatial flexibility will be needed. Spatial flexibility achieved through investments in national electricity networks and cross-border interconnections is crucial to support the aggressive roll-out of variable renewable energy sources. Cross-border trade in electricity is expected to increase and in deep decarbonisation scenarios the electricity transmission capacity will be larger than that of natural gas. Hydrogen storage and green hydrogen production will play a key role in providing traditional inter-seasonal flexibility and intraday flexibility will be provided by a combination of electrical energy storage hydrogen-based storage solutions (e.g. liquid H2 and pressurised storage) and hybrid heat pumps. Hydrogen networks and storage will become more critical as we move towards the highest decarbonisation scenario. Still the need for natural gas networks and storage will decrease substantially.
An Artificial Neural Network-Based Fault Diagnostics Approach for Hydrogen-Fueled Micro Gas Turbines
Feb 2024
Publication
The utilization of hydrogen fuel in gas turbines brings significant changes to the thermophysical properties of flue gas including higher specific heat capacities and an enhanced steam content. Therefore hydrogen-fueled gas turbines are susceptible to health degradation in the form of steam-induced corrosion and erosion in the hot gas path. In this context the fault diagnosis of hydrogen-fueled gas turbines becomes indispensable. To the authors’ knowledge there is a scarcity of fault diagnosis studies for retrofitted gas turbines considering hydrogen as a potential fuel. The present study however develops an artificial neural network (ANN)-based fault diagnosis model using the MATLAB environment. Prior to the fault detection isolation and identification modules physics-based performance data of a 100 kW micro gas turbine (MGT) were synthesized using the GasTurb tool. An ANN-based classification algorithm showed a 96.2% classification accuracy for the fault detection and isolation. Moreover the feedforward neural network-based regression algorithm showed quite good training testing and validation accuracies in terms of the root mean square error (RMSE). The study revealed that the presence of hydrogen-induced corrosion faults (both as a single corrosion fault or as simultaneous fouling and corrosion) led to false alarms thereby prompting other incorrect faults during the fault detection and isolation modules. Additionally the performance of the fault identification module for the hydrogen fuel scenario was found to be marginally lower than that of the natural gas case due to assumption of small magnitudes of faults arising from hydrogen-induced corrosion.
Renewable Methanol Synthesis
Oct 2019
Publication
Renewable methanol production is an emerging technology that bridges the gap in the shift from fossil fuel to renewable energy. Two thirds of the global emission of CO2 stems from humanity’s increasing energy need from fossil fuels. Renewable energy mainly from solar and wind energy suffers from supply intermittency which current grid infrastructures cannot accommodate. Excess renewable energy can be harnessed to power the electrolysis of water to produce hydrogen which can be used in the catalytic hydrogenation of waste CO2 to produce renewable methanol. This review considers methanol production in the current context regionally for Europe which is dominated by Germany and globally by China. Appropriate carbon-based feedstock for renewable methanol production is considered as well as state-of-the-art renewable hydrogen production technologies. The economics of renewable methanol production necessitates the consideration of regionally relevant methanol derivatives. The thermodynamics kinetics catalytic reaction mechanism operating conditions and reactor design are reviewed in the context of renewable methanol production to reveal the most up to date understanding.
CFD Thermo‑Hydraulic Evaluation of a Liquid Hydrogen Storage Tank with Different Insulation Thickness in a Small‑Scale Hydrogen Liquefier
Aug 2023
Publication
Accurate evaluation of thermo‑fluid dynamic characteristics in tanks is critically important for designing liquid hydrogen tanks for small‑scale hydrogen liquefiers to minimize heat leakage into the liquid and ullage. Due to the high costs most future liquid hydrogen storage tank designs will have to rely on predictive computational models for minimizing pressurization and heat leakage. Therefore in this study to improve the storage efficiency of a small‑scale hydrogen liquefier a three‑ dimensional CFD model that can predict the boil‑off rate and the thermo‑fluid characteristics due to heat penetration has been developed. The prediction performance and accuracy of the CFD model was validated based on comparisons between its results and previous experimental data and a good agreement was obtained. To evaluate the insulation performance of polyurethane foam with three different insulation thicknesses the pressure changes and thermo‑fluid characteristics in a partially liquid hydrogen tank subject to fixed ambient temperature and wind velocity were investigated nu‑ merically. It was confirmed that the numerical simulation results well describe not only the temporal variations in the thermal gradient due to coupling between the buoyance and convection but also the buoyancy‑driven turbulent flow characteristics inside liquid hydrogen storage tanks with differ‑ ent insulation thicknesses. In the future the numerical model developed in this study will be used for optimizing the insulation systems of storage tanks for small‑scale hydrogen liquefiers which is a cost‑effective and highly efficient approach.
Recent Advances in Combustion Science Related to Hydrogen Safety
Dec 2024
Publication
Hydrogen is a key pillar in the global Net Zero strategy. Rapid scaling up of hydrogen production transport distribution and utilization is expected. This entails that hydrogen which is traditionally an industrial gas will come into proximity of populated urban areas and in some situations handled by the untrained public. To realize all their benefits hydrogen and its technologies must be safely developed and deployed. The specific properties of hydrogen involving wide flammability range low ignition energy and fast flame speed implies that any accidental release of hydrogen can be easily ignited. Comparing with conventional fuels combustion systems fueled by hydrogen are also more prone to flame instability and abnormal combustion. This paper aims to provide a comprehensive review about combustion research related to hydrogen safety. It starts with a brief introduction which includes some overview about risk analysis codes and standards. The core content covers ignition fire explosions and deflagration to detonation transition (DDT). Considering that DDT leads to detonation and that detonation may also be induced directly under special circumstances the subject of detonation is also included for completeness. The review covers laboratory medium and large-scale experiments as well as theoretical analysis and numerical simulation results. While highlights are provided at the end of each section the paper closes with some concluding remarks highlighting the achievements and key knowledge gaps.
Advancing the Affordable and Clean Energy in Large Energy-consuming Economies: The Role of Green Transition, Complexity-based, and Geostrategy Policy
Aug 2023
Publication
With decreasing costs of the clean technologies the balanced scales of the Sustainable Development Goal 7 targets e.g. energy equity (EE) energy security (ES) and environmental sustainability (EVS) are quickly changing. This fundamental balancing process is a key requirement for a net-zero future. Accordingly this research analyzes the regime-switching effect of Hydrogen economy as the green transition sharing economy and economic complexity as the complexity-based and geopolitical risks and energy prices as the geostrategy policies on the Goal 7 targets. To this end a Markov-switching panel vector autoregressive method with regime-heteroskedasticity is applied to study advancing the Goal 7 in the world's twenty-five large energy consumers during 2004–2020. Concerning the parameters and statistics of the model the results refer to the existence of two regimes associated with the Goal 7 corners called “upward and downward” regimes for EE and “slightly upward and sharply upward” regimes for ES and EVS. It is revealed that the vulnerability of EE and ES targets is considerably reduced when the regime switches to the dominant regime that is “downward” and “slightly upward” regimes respectively and that of the EVS target remains unaffected. Through the impulse-response analysis the findings denote that the first hypothesis of the efficiency of the Hydrogen economy in promoting the Goal 7 targets is insignificant. However the significant short-term and dynamic shock effects of the complexity-based and geostrategy policies on the Hydrogen economy are detected which will be a feasible alternative assessment in advancing the Goal 7. Further the complexity-based policies support the Goal 7 targets under different regimes especially in the short- and medium-term. Hence the second hypothesis regarding the effectiveness of the complexity-based policies in promoting Goal 7 targets is confirmed. The third hypothesis concerning the complexity of the impact of geostrategy policies on the Goal 7 targets is verified. Particularly the switching process towards the Goal 7 may not necessarily be restricted by the geopolitical risks. Moreover EE is supported through energy prices in the short-term under both regimes while they are non-conductive to promote ES and EVS through time. Accordingly the decision-makers should acknowledge adopting a regime-switching path forward for ensuring the time-varying balanced growth of the Goal 7 targets as the impact of the suggested policy instruments is asymmetric.
A Renewable Power System for an Off-grid Sustainable Telescope Fueled by Solar Power, Batteries and Green Hydrogen
Jul 2023
Publication
A large portion of astronomy’s carbon footprint stems from fossil fuels supplying the power demand of astronomical observatories. Here we explore various isolated low-carbon power system setups for the newly planned Atacama Large Aperture Submillimeter Telescope and compare them to a business-as-usual diesel power generated system. Technologies included in the designed systems are photovoltaics concentrated solar power diesel generators batteries and hydrogen storage. We adapt the electricity system optimization model highRES to this case study and feed it with the telescope’s projected energy demand cost assumptions for the year 2030 and site-specific capacity factors. Our results show that the lowest-cost system with LCOEs of $116/MWh majorly uses photovoltaics paired with batteries and fuel cells running on imported and on-site produced green hydrogen. Some diesel generators run for backup. This solution would reduce the telescope’s power-side carbon footprint by 95% compared to the businessas-usual case.
19 Import Options for Green Hydrogen and Derivatives - An Overview of Efficiencies and Technology Readiness Levels
Oct 2024
Publication
The import of hydrogen and derivatives forms part of many national strategies and is fundamental to achieving climate protection targets. This paper provides an overview and technical comparison of import pathways for hydrogen and derivatives in terms of efficiency technological maturity and development and construction times with a focus on the period up to 2030. The import of hydrogen via pipeline has the highest system efficiency at 57–67 % and the highest technological maturity with a technology readiness level (TRL) of 8–9. The import of ammonia and methanol via ship and of SNG via pipeline shows efficiencies in the range of 39–64 % and a technological maturity of TRL 7 to 9 when using point sources. Liquid hydrogen LOHC and Fischer-Tropsch products have the lowest efficiency and TRL in comparison. The use of direct air capture (DAC) reduces efficiency and TRL considerably. Reconversion of the derivatives to hydrogen is also associated with high losses and is not achievable for all technologies on an industrial scale up to 2030. In the short to medium term import routes for derivatives that can utilise existing infrastructures and mature technologies are the most promising for imports. In the long term the most promising option is hydrogen via pipelines.
Techno-Economic Potential of Wind-Based Green Hydrogen Production in Djibouti: Literature Review and Case Studies
Aug 2023
Publication
Disputed supply chains inappropriate weather and low investment followed by the Russian invasion of Ukraine has led to a phenomenal energy crisis especially in the Horn of Africa. Accordingly proposing eco-friendly and sustainable solutions to diversify the access of electricity in the Republic of Djibouti which has no conventional energy resources and is completely energy dependent on its neighboring countries has become a must. Therefore the implementation of sustainable renewable and energy storage systems is nationally prioritized. This paper deals for the first time with the exploitation of such an affordable and carbon-free resource to produce hydrogen from wind energy in the rural areas of Nagad and Bara Wein in Djibouti. The production of hydrogen and the relevant CO2 emission reduction using different De Wind D6 Vestas and Nordex wind turbines are displayed while using Alkaline and Proton Exchange Membrane (PEM) electrolyzers. The Bara Wein and Nagad sites had a monthly wind speed above 7 m/s. From the results the Nordex turbine accompanied with the alkaline electrolyzer provides the most affordable electricity production approximately 0.0032 $/kWh for both sites; this cost is about one per hundred the actual imported hydroelectric energy price. Through the ecological analysis the Nordex turbine is the most suitable wind turbine with a CO2 emission reduction of 363.58 tons for Bara Wein compared to 228.76 tons for Nagad. While integrating the initial cost of wind turbine implementation in the capital investment the mass and the levelized cost of the produced green hydrogen are estimated as (29.68 tons and 11.48 $/kg) for Bara Wein with corresponding values of (18.68 tons and 18.25 $/kg) for Nagad.
The Evolution of Green Hydrogen in Renewable Energy Research: Insights from a Bibliometric Perspective
Dec 2024
Publication
Green hydrogen generated from water through renewable energies like solar and wind is a key player in sus tainable energy. It only produces water when used making it a clean energy source. However the inconsistent nature of solar and wind energy highlights the need for storage solutions where green hydrogen is promising. This study uniquely combines green hydrogen (GH) and renewable energy (RE) domains using a comprehensive bibliometric approach covering 2018–2022. It identifies emerging trends collaboration networks and key contributors that shape the global landscape of GH research. Our findings show a significant yearly growth in this research field averaging 93.56 %. The study also identifies China Germany India and Italy as leaders among 76 countries involved in this area. Research trends have shifted from technical details to social and economic factors. Given the increasing global commitment to achieving carbon neutrality understanding the evolution and integration of GH within RE systems is essential for guiding future research policy-making and technology development. The analysis categorizes the research into seven main themes focusing on green hydrogen’s role in energy transition and storage. Other vital topics include improving hydrogen production methods assessing its climate impact examining its environmental benefits and exploring various production techniques like water electrolysis and photocatalysis. Our analysis reveals a 93.56 % annual growth rate in GH research highlighting key challenges in storage integration and policy development and offering a roadmap for future studies. The study highlights areas needing more exploration such as better storage methods integration with existing energy infrastructures risk management and policy development. The advancement of green hydrogen as a sustainable energy solution depends on innovative research international collaboration and supportive policy frameworks.
Sixteen Percent Solar-to-Hydrogen Efficiency Using a Power-Matched Alkaline Electrolyzer and a High Concentrated Solar Cell: Effect of Operating Parameters
Apr 2020
Publication
The effect of electrode area electrolyte concentration temperature andlight intensity (up to 218 sun) on PV electrolysis of water is studied using a highconcentrated triple-junction (3-J) photovoltaic cell (PV) connected directly to analkaline membrane electrolyzer (EC). For a given current the voltage requirement torun an electrolyzer increases with a decrease in electrode sizes (4.5 2.0 0.5 and 0.25cm2) due to high current densities. The high current density operation leads to highOhmic losses most probably due to the concentration gradient and bubble formation.The EC operating parameters including the electrolyte concentration and temperaturereduce the voltage requirement by improving the thermodynamics kinetics andtransport properties of the overall electrolysis process. For a direct PV−EC coupling themaximum power point of PV (Pmax) is matched using EC I−V (current−voltage) curvesmeasured for different electrode sizes. A shift in the EC I−V curves toward open-circuitvoltage (Voc) reduces the Pop (operating power) to hydrogen efficiencies due to theincreased voltage losses above the equilibrium water-splitting potential. The solar-to-hydrogen (STH) efficiencies remainedcomparable (∼16%) for all electrode sizes when the operating current (Iop) was similar to the short-circuit current (Isc ) irrespectiveof the operating voltage (Vop) electrolyzer temperature and electrolyte concentration.
Solar-driven (Photo)electrochemical Devices for Green Hydrogen Production and Storage: Working Principles and Design
Feb 2024
Publication
The large-scale deployment of technologies that enable energy from renewables is essential for a successful transition to a carbon-neutral future. While photovoltaic panels are one of the main technologies commonly used for harvesting energy from the Sun storage of renewable solar energy still presents some challenges and often requires integration with additional devices. It is believed that hydrogen – being a perfect energy carrier – can become one of the broadly utilised storage alternatives that would effectively mitigate the energy supply and demand issues associated with the intermittent nature of renewable energy sources. Current pathways in the development of green technologies indicate the need for more sustainable material utilisation and more efficient device operation. To address this requirement integration of various technologies for renewable energy harvesting conversion and storage in a single device appears as an advantageous option. From the hydrogen economy perspective systems driven by green solar electricity that allow for (photo)electrochemical water splitting would generate hydrogen with the minimal CO2 footprint. If at the same time one of the device electrodes could store the generated gas and release it on demand the utilisation of critical and often costly elements would be reduced with possible gain in more effective device operation. Although conceptually attractive this cross-disciplinary concept has not gained yet enough attention and only limited number of experimental setups have been designed tested and reported. This review presents the first exhaustive overview and critical examination of various laboratory-scale prototype setups that attempt to combine both the hydrogen production and storage processes in a single unit via integration of a metal hydride-based electrode into a photoelectrochemical cell. The architectures of presented configurations enables direct solar energy to hydrogen conversion and its subsequent storage in a single device which – in some cases – can also release the stored (hydrogen) energy on demand. In addition this work explores perspectives and challenges related with the potential upscaling of reviewed solar-to-hydrogen storage systems trying to map and indicate the main future directions of their technological development and optimization. Finally the review also combines information and expertise scattered among various research fields with the aim of stimulating much-needed exchange of knowledge to accelerate the progress in the development and deployment of optimum green hydrogen-based solutions.
Techno-economic Assessments of Electrolyzers for Hydrogen Production
Jul 2025
Publication
This review provides a comprehensive techno-economic assessment of four leading electrolyzer technologies such as the Alkaline Water Electrolyzers (AWE) Proton Exchange Membrane (PEM) electrolyzers Solid Oxide Electrolyzer Cells (SOEC) and Anion Exchange Membrane (AEM) systems for green hydrogen production. Drawing on more than 40 peer-reviewed studies and real-world deployment scenarios the analysis compares performance indicators such as levelised cost of hydrogen (LCOH) capital expenditure (CAPEX) operating expenditure (OPEX) efficiency stack durability and water treatment requirements. AWE is identified as the most cost-effective option for baseload power contexts while PEM offers superior dynamic response and gas purity at a higher cost. SOECs despite their high theoretical efficiency remain limited by thermal cycling and material degradation. AEMs though less mature hold promise for low-cost decentralized hydrogen production. Cost of electricity is more than 64 % of LCOH in all technologies so it is important to match electrolyzers with stable or hybrid renewable energy resources such as geothermal wind-solar or Concentrated Solar Power (CSP). Optimisation methods such as genetic algorithms and GIS-based siting also enhance system performance and economic value. The report also considers regional and policy dimensions of deployment underlining the need for site-specific solutions in the context of local energy portfolios water supply and infrastructure readiness. Recommendations are provided for advancing membrane longevity integrating smart control systems and optimizing techno-economic assessment models. This study is a policy decision-making tool for policymakers investors and researchers who are interested in accelerating the global scale-up of green hydrogen using contextrelevant and economically viable electrolyzer technologies.
Performance Assessment and Optimization of the Ultra-High Speed Air Compressor in Hydrogen Fuel Cell Vehicles
Feb 2024
Publication
Air compressors in hydrogen fuel cell vehicles play a crucial role in ensuring the stability of the cathode air system. However they currently face challenges related to low efficiency and poor stability. To address these issues the experimental setup for the pneumatic performance of air compressors is established. The effects of operational parameters on energy consumption efficiency and mass flow rate of the air compressor are revealed based on a Morris global sensitivity analysis. Considering a higher flow rate larger efficiency and lower energy consumption simultaneously the optimal operating combination of the air compressor is determined based on grey relational multi-objective optimization. The optimal combination of operational parameters consisted of a speed of 80000 rpm a pressure ratio of 1.8 and an inlet temperature of 18.3 °C. Compared to the average values the isentropic efficiency achieved a 48.23% increase and the mass flow rate rose by 78.88% under the optimal operational combination. These findings hold significant value in guiding the efficient and stable operation of air compressors. The comprehensive methodology employed in this study is applicable further to investigate air compressors for hydrogen fuel cell vehicles.
Optimisation of Size and Control Strategy in Utility-scale of Green Hydrogen Production Systems
Aug 2023
Publication
The optimisation of green hydrogen production systems is challenging. Moreover an accurate simulation of the system is required for effective optimisation. This study presents a novel method for optimising utility-scale hybrid photovoltaice-wind systems for hydrogen production using accurate simulation models. The optimisation objective is to minimise the levelised cost of hydrogen (LCOH) using genetic algorithms. Different types of systems (such as islanded systems grid-connected systems with or without the possibility of purchasing electricity from the grid and grid-connected systems considering power curtailment) are evaluated and optimised. Each combination of components and control strategy is simulated during the system lifetime (20 yrs) in time steps of 5 min considering the degradation of renewable generators during the system lifetime and different real-time pricing curves and renewable resource curves for each year of the system lifetime. Accurate models are used in the simulations including electrolyser efficiency dependent on the input power and cold-start extra ageing. An application example located in Zaragoza (Spain) is shown obtaining LCOH from 4.74 to 16.06 V/kg depending on the type of project and electrolyser.
The Necessity and Feasibility of Hydrogen Storage for Large-Scale, Long-Term Energy Storage in the New Power System in China
Jun 2023
Publication
In the process of building a new power system with new energy sources as the mainstay wind power and photovoltaic energy enter the multiplication stage with randomness and uncertainty and the foundation and support role of large-scale long-time energy storage is highlighted. Considering the advantages of hydrogen energy storage in large-scale cross-seasonal and cross-regional aspects the necessity feasibility and economy of hydrogen energy participation in long-time energy storage under the new power system are discussed. Firstly power supply and demand production simulations were carried out based on the characteristics of new energy generation in China. When the penetration of new energy sources in the new power system reaches 45% long-term energy storage becomes an essential regulation tool. Secondly by comparing the storage duration storage scale and application scenarios of various energy storage technologies it was determined that hydrogen storage is the most preferable choice to participate in large-scale and long-term energy storage. Three long-time hydrogen storage methods are screened out from numerous hydrogen storage technologies including salt-cavern hydrogen storage natural gas blending and solid-state hydrogen storage. Finally by analyzing the development status and economy of the above three types of hydrogen storage technologies and based on the geographical characteristics and resource endowment of China it is pointed out that China will form a hydrogen storage system of “solid state hydrogen storage above ground and salt cavern storage underground” in the future.
Energy Management in a Super-Tanker Powered by Solar, Wind, Hydrogen and Boil-Off Gas for Saving CO2 Emissions
Apr 2024
Publication
In terms of energy generation and consumption ships are autonomous isolated systems with power demands varying according to the type of ship: passenger or commercial. The power supply in modern ships is based on thermal engines-generators which use fossil fuels marine diesel oil (MDO) and liquefied natural gas (LNG). The continuous operation of thermal engines on ships during cruises results in increased emissions of polluting gases mainly CO/CO2 . The combination of renewable energy sources (REs) and triple-fuel diesel engines (TFDEs) can reduce CO/CO2 emissions resulting in a “greener” interaction between ships and the ecosystem. This work presents a new control method for balancing the power generation and the load demands of a ship equipped with TFDEs fuel cells (FCs) and REs based on a real and accurate model of a super-tanker and simulation of its operation in real cruise conditions. The new TFDE technology engines are capable of using different fuels (marine diesel oil heavy fuel oil and liquified natural gas) producing the power required for ship operation as well as using compositions of other fuels based on diesel aiming to reduce the polluting gases produced. The energy management system (EMS) of a ship is designed and implemented in the structure of a finite state machine (FSM) using the logical design of transitions from state to state. The results demonstrate that further reductions in fossil fuel consumption as well as CO2 emissions are possible if ship power generation is combined with FC units that consume hydrogen as fuel. The hydrogen is produced locally on the ship through electrolysis using the electric power generated by the on-board renewable energy sources (REs) using photovoltaic systems (PVs) and wind energy conversion turbines (WECs).
Advantages and Technological Progress of Hydrogen Fuel Cell Vehicles
Jun 2023
Publication
The automotive industry is undergoing a profound transformation driven by the need for sustainable and environmentally friendly transportation solutions [1]. In this context fuel cell technology has emerged as a promising alternative offering clean efficient and high-performance power sources for vehicles [2]. Fuel cell vehicles are electric vehicles that use fuel cell systems as a single power source or as a hybrid power source in combination with rechargeable energy storage systems. A typical fuel cell system for electric vehicle is exhibited in Figure 1 which provides a comprehensive demonstration of this kind of complex system. Hydrogen energy is a crucial field in the new energy revolution and will become a key pillar in building a green efficient and secure new energy system. As a critical field for hydrogen utilization fuel cell vehicles will play an important role in the transformation and development of the automotive industry. The development of fuel cell vehicles offers numerous advantages such as strong power outputs safety reliability and economic energy savings [3]. However improvements must urgently be made in existing technologies such as fuel cell stacks (including proton exchange membranes catalysts gas diffusion layers and bipolar plates) compressors and onboard hydrogen storage systems [4]. The advantages and current technological status are analyzed here.
Sustainable Vehicles for Decarbonizing the Transport Sector: A Comparison of Biofuel, Electric, Fuel Cell and Solar-powered Vehicles
Mar 2024
Publication
Climate change necessitates urgent action to decarbonize the transport sector. Sustainable vehicles represent crucial alternatives to traditional combustion engines. This study comprehensively compares four prominent sustainable vehicle technologies: biofuel-powered vehicles (BPVs) fuel cell vehicles (FCVs) electric vehicles (EVs) and solar vehicles. We examine each technology’s history development classification key components and operational principles. Furthermore we assess their sustainability through technical factors environmental impacts cost considerations and policy dimensions. Moreover the discussion section addresses the challenges and opportunities associated with each technology and assesses their social impact including public perception and adoption. Each technology offers promise for sustainable transportation but faces unique challenges. Policymakers industry stakeholders and researchers must collaborate to address these challenges and accelerate the transition toward a decarbonized transport future. Potential future research areas are identified to guide advancements in sustainable vehicle technologies.
Modern Hydrogen Technologies in the Face of Climate Change—Analysis of Strategy and Development in Polish Conditions
Aug 2023
Publication
The energy production market based on hydrogen technologies is an innovative solution that will allow the industry to achieve climate neutrality in the future in Poland and in the world. The paper presents the idea of using hydrogen as a modern energy carrier and devices that in cooperation with renewable energy sources produce the so-called green hydrogen and the applicable legal acts that allow for the implementation of the new technology were analyzed. Energy transformation is inevitable and according to reports on good practices in European Union countries hydrogen and the hydrogen value chain (production transport and transmission storage use in transport and energy) have wide potential. Thanks to joint projects and subsidies from the EU initiatives supporting hydrogen technologies are created such as hydrogen clusters and hydrogen valleys and EU and national strategic programs set the main goals. Poland is one of the leaders in hydrogen production both in the world and in Europe. Domestic tycoons from the energy refining and chemical industries are involved in the projects. Eight hydrogen valleys that have recently been created in Poland successfully implement the assumptions of the “Polish Hydrogen Strategy until 2030 with a perspective until 2040” and “Energy Policy of Poland until 2040” which are in line with the assumptions of the most important legal acts of the EU including the European Union’s energy and climate policy the Green Deal and the Fit for 55 Package. The review of the analysis of the development of hydrogen technologies in Poland shows that Poland does not differ from other European countries. As part of the assumptions of the European Hydrogen Strategy and the trend related to the management of energy surpluses electrolyzers with a capacity of at least 6 GW will be installed in Poland in 2020–2024. It is also assumed that in the next phase planned for 2025–2030 hydrogen will be a carrier in the energy system in Poland. Poland as a member of the EU is the creator of documents that take into account the assumptions of the European Union Commission and systematically implement the assumed goals. The strategy of activities supporting the development of hydrogen technologies in Poland and the value chain includes very extensive activities related to among others obtaining hydrogen using hydrogen in transport energy and industry developing human resources for the new economy supporting the activities of hydrogen valley stakeholders building hydrogen refueling stations and cooperation among Poland Slovakia and the Czech Republic as part of the HydrogenEagle project.
No more items...