Production & Supply Chain
Design and Development of a Catalytic Fixed-Bed Reactor for Gasification of Banana Biomass in Hydrogen Production
Apr 2022
Publication
Hydrogen produced from biomass is an alternative energy source to fossil fuels. In this study hydrogen production by gasification of the banana plant is proposed. A fixed-bed catalytic reactor was designed considering fluidization conditions and a height/diameter ratio of 3/1. Experimentation was carried out under the following conditions: 368 ◦C atmospheric pressure 11.75 g of residual mass of the banana (pseudo-stem) an average particle diameter of 1.84 mm and superheated water vapor as a gasifying agent. Gasification reactions were performed using a catalyzed and uncatalyzed medium to compare the effectiveness of each case. The catalyst was Ni/Al2O3 synthesized by coprecipitation. The gas mixture produced from the reaction was continuously condensed to form a two-phase liquid–gas system. The synthesis gas was passed through a silica gel filter and analyzed online by gas chromatography. To conclude the results of this study show production of 178 mg of synthesis gas for every 1 g of biomass and the selectivity of hydrogen to be 51.8 mol% when a Ni 2.5% w/w catalyst was used. The amount of CO2 was halved and CO was reduced from 3.87% to 0% in molar percentage. Lastly a simulation of the distribution of temperatures inside the furnace was developed; the modeled behavior is in agreement with experimental observations.
Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect
Aug 2020
Publication
Natural gas (Methane) is currently the primary source of catalytic hydrogen production accounting for three quarters of the annual global dedicated hydrogen production (about 70 M tons). Steam–methane reforming (SMR) is the currently used industrial process for hydrogen production. However the SMR process suffers with insufficient catalytic activity low long-term stability and excessive energy input mostly due to the handling of large amount of CO2 coproduced. With the demand for anticipated hydrogen production to reach 122.5 M tons in 2024 novel and upgraded catalytic processes are desired for more effective utilization of precious natural resources. In this review we summarized the major descriptors of catalyst and reaction engineering of the SMR process and compared the SMR process with its derivative technologies such as dry reforming with CO2 (DRM) partial oxidation with O2 autothermal reforming with H2O and O2. Finally we discussed the new progresses of methane conversion: direct decomposition to hydrogen and solid carbon and selective oxidation in mild conditions to hydrogen containing liquid organics (i.e. methanol formic acid and acetic acid) which serve as alternative hydrogen carriers. We hope this review will help to achieve a whole picture of catalytic hydrogen production from methane.
Assessing the Life-Cycle Performance of Hydrogen Production via Biofuel Reforming in Europe
Jun 2015
Publication
Currently hydrogen is mainly produced through steam reforming of natural gas. However this conventional process involves environmental and energy security concerns. This has led to the development of alternative technologies for (potentially) green hydrogen production. In this work the environmental and energy performance of biohydrogen produced in Europe via steam reforming of glycerol and bio-oil is evaluated from a life-cycle perspective and contrasted with that of conventional hydrogen from steam methane reforming. Glycerol as a by-product from the production of rapeseed biodiesel and bio-oil from the fast pyrolysis of poplar biomass are considered. The processing plants are simulated in Aspen Plus® to provide inventory data for the life cycle assessment. The environmental impact potentials evaluated include abiotic depletion global warming ozone layer depletion photochemical oxidant formation land competition acidification and eutrophication. Furthermore the cumulative (total and non-renewable) energy demand is calculated as well as the corresponding renewability scores and life-cycle energy balances and efficiencies of the biohydrogen products. In addition to quantitative evidence of the (expected) relevance of the feedstock and impact categories considered results show that poplar-derived bio-oil could be a suitable feedstock for steam reforming in contrast to first-generation bioglycerol.
Methane Cracking for Hydrogen Production: A Review of Catalytic and Molten Media Pyrolysis
May 2022
Publication
Currently hydrogen is mainly generated by steam methane reforming with significant CO2 emissions thus exacerbating the greenhouse effect. This environmental concern promotes methane cracking which represents one of the most promising alternatives for hydrogen production with theoretical zero CO/CO2 emissions. Methane cracking has been intensively investigated using metallic and carbonaceous catalysts. Recently research has focused on methane pyrolysis in molten metals/salts to prevent both reactor coking and rapid catalyst deactivation frequently encountered in conventional pyrolysis. Another expected advantage is the heat transfer improvement due to the high heat capacity of molten media. Apart from the reaction itself that produces hydrogen and solid carbon the energy source used in this endothermic process can also contribute to reducing environmental impacts. While most researchers used nonrenewable sources based on fossil fuel combustion or electrical heating concentrated solar energy has not been thoroughly investigated to date for pyrolysis in molten media. However it could be a promising innovative pathway to further improve hydrogen production sustainability from methane cracking. After recalling the basics of conventional catalytic methane cracking and the developed solar cracking reactors this review delves into the most significant results of the state-of-the-art methane pyrolysis in melts (molten metals and salts) to show the advantages and the perspectives of this new path as well as the carbon products’ characteristics and the main factors governing methane conversion.
Dynamic Emulation of a PEM Electrolyzer by Time Constant Based Exponential Model
Feb 2019
Publication
The main objective of this paper is to develop a dynamic emulator of a proton exchange membrane (PEM) electrolyzer (EL) through an equivalent electrical model. Experimental investigations have highlighted the capacitive effect of EL when subjecting to dynamic current profiles which so far has not been reported in the literature. Thanks to a thorough experimental study the electrical domain of a PEM EL composed of 3 cells has been modeled under dynamic operating conditions. The dynamic emulator is based on an equivalent electrical scheme that takes into consideration the dynamic behavior of the EL in cases of sudden variation in the supply current. The model parameters were identified for a suitable current interval to consider them as constant and then tested with experimental data. The obtained results through the developed dynamic emulator have demonstrated its ability to accurately replicate the dynamic behavior of a PEM EL.
Nuclear-Renewables Energy System for Hydrogen and Electricity Production
May 2011
Publication
In the future the world may have large stranded resources of low-cost wind and solar electricity. Renewable electricity production does not match demand and production is far from major cities. The coupling of nuclear energy with renewables may enable full utilization of nuclear and renewable facilities to meet local electricity demands and export pipeline hydrogen for liquid fuels fertilizer and metals production. Renewables would produce electricity at full capacity in large quantities. The base-load nuclear plants would match electricity production with demand by varying the steam used for electricity versus hydrogen production. High-temperature electrolysis (HTE) would produce hydrogen from water using (a) steam from nuclear plants and (b) electricity from nuclear plants and renewables. During times of peak electricity demand the HTE cells would operate in reverse fuel cell mode to produce power substituting for gas turbines that are used for very few hours per year and that thus have very high electricity costs. The important net hydrogen production would be shipped by pipeline to customers. Local hydrogen storage would enable full utilization of long-distance pipeline capacity with variable production. The electricity and hydrogen production were simulated with real load and wind data to understand under what conditions such systems are economic. The parametric case study uses a wind-nuclear system in North Dakota with hydrogen exported to the Chicago refinery market. North Dakota has some of the best wind conditions in the United States and thus potentially low-cost wind. The methodology allows assessments with different economic and technical assumptions - including what electrolyzer characteristics are most important for economic viability.
A Comparison of Steam Reforming Concepts in Solid Oxide Fuel Cell Systems
Mar 2020
Publication
Various concepts have been proposed to use hydrocarbon fuels in solid oxide fuel cell (SOFC) systems. A combination of either allothermal or adiabatic pre-reforming and water recirculation (WR) or anode off-gas recirculation (AOGR) is commonly used to convert the fuel into a hydrogen rich mixture before it is electrochemically oxidised in the SOFC. However it is unclear how these reforming concepts affect the electrochemistry and temperature gradients in the SOFC stack. In this study four reforming concepts based on either allothermal or adiabatic pre-reforming and either WR or AOGR are modelled on both stack and system level. The electrochemistry and temperature gradients in the stack are simulated with a one-dimensional SOFC model and the results are used to calculate the corresponding system efficiencies. The highest system efficiencies are obtained with allothermal pre-reforming and WR. Adiabatic pre-reforming and AOGR result in a higher degree of internal reforming which reduces the cell voltage compared to allothermal pre-reforming and WR. Although this lowers the stack efficiency higher degrees of internal reforming reduce the power consumption by the cathode air blower as well leading to higher system efficiencies in some cases. This illustrates that both stack and system operation need to be considered to design an efficient SOFC system and predict potentially deteriorating temperature gradients in the stack.
Advanced Catalysts for the Water Gas Shift Reaction
Apr 2022
Publication
The WGS reaction is an exothermic reaction between carbon monoxide and steam to form carbon dioxide and hydrogen. This reaction which has been used industrially for more than 100 years has recently received a great deal of attention from researchers as one of the ways to produce environmentally acceptable hydrogen from fossil fuels in large quantities. For the application of this reaction on an industrial scale the key is choosing the optimal catalysts that can ensure high CO conversion and have a long lifetime under industrial conditions. Therefore new types of catalysts are being developed that meet these requirements better than the Fe- and Cu-based catalysts commonly used in the past. The WGSR on a commercial nickel-based catalyst and a laboratory-prepared copper and cobalt-based catalyst was tested in a laboratory apparatus set up at the University of Chemistry and Technology Prague. The best performance of the laboratory-prepared catalyst was observed for the catalyst with a Cu content of 14.8 wt% and activated in a hydrogen atmosphere. The laboratory-prepared Co-based catalyst showed good WGSR activity in the temperature range of 200–450 ◦C although this was always inferior to that of the Cu-based catalyst. When subjected to the feed gas containing 0.4 mole% H2S the Co-based catalyst showed good resistance to sulphur poisoning. Therefore Co-based catalysts can be considered good sulphur-tolerant intermediate temperature WGSR catalysts.
Electrocatalytic Properties for the Hydrogen Evolution of the Electrodeposited Ni–Mo/WC Composites
May 2021
Publication
The catalytical activity for the hydrogen evolution reaction (HER) of the electrodeposited Ni–Mo/WC composites is examined in 1 M KOH solution. The structure surface morphology and surface composition is investigated using the scanning electron microscopy X-ray diffraction and X-ray photoelectron spectroscopy. The electrocatalytic properties for the HER is evaluated based on the cathodic polarization electrochemical impedance cyclic voltammetry and chronopotentiometry methods. The obtained results prove the superior catalytic activity for the HER of Ni–Mo/WC composites to Ni–Mo alloy. The catalytic activity of Ni–Mo/WC electrodes is determined by the presence of WC nanoparticles and Mo content in the metallic matrix. The best electrocatalytic properties are identified for Ni–Mo/WC composite with the highest Mo content and the most oxidized surface among the studied coatings. The impedance results reveal that the observed improvement in the catalytic activity is the consequence of high real surface area and high intrinsic catalytic activity of the composite.
Super Short Term Combined Power Prediction for Wind Power Hydrogen Production
Sep 2022
Publication
A combined ultra-short-term wind power prediction strategy with high robustness based on least squares support vector machine (LSSVM) has been proposed in order to solve the wind abandonment caused by wind power randomness and realize efficient hydrogen production under wide power fluctuation. Firstly the original wind power data is decomposed into sub-modes with different bandwidth by variational modal decomposition (VMD) which reduces the influence of random noise and mode mixing significantly. Then dragonfly algorithm (DA) is introduced to optimize LSSVM kernel function and the combined ultra-short-term wind power prediction strategy which meets the time resolution and accuracy requirements of electrolytic cell control has been established finally. This model is validated by a wind power hydrogen production demonstration project output in the middle east of China. The superior prediction accuracy for high volatility wind power data is verified and the algorithm provides theoretical basis to improve the control of wind power hydrogen production system
Graphitic Carbon Nitride Heterojunction Photocatalysts for Solar Hydrogen Production
Sep 2021
Publication
Photocatalytic hydrogen production is considered as an ideal approach to solve global energy crisis and environmental pollution. Graphitic carbon nitride (g-C3N4) has received extensive consideration due to its facile synthesis stable physicochemical properties and easy functionalization. However the pristine g-C3N4 usually shows unsatisfactory photocatalytic activity due to the limited separation efficiency of photogenerated charge carriers. Generally introducing semiconductors or co-catalysts to construct g–C3N4–based heterojunction photocatalysts is recognized as an effective method to solve this bottleneck. In this review the advantages and characteristics of various types of g–C3N4–based heterojunction are analyzed. Subsequently the recent progress of highly efficient g–C3N4–based heterojunction photocatalysts in the field of photocatalytic water splitting is emphatically introduced. Finally a vision of future perspectives and challenges of g–C3N4–based heterojunction photocatalysts in hydrogen production are presented. Predictably this timely review will provide valuable reference for the design of efficient heterojunctions towards photocatalytic water splitting and other photoredox reactions.
Solar Hydrogen Production via a Samarium Oxide-Based Thermochemical Water Splitting Cycle
Apr 2016
Publication
The computational thermodynamic analysis of a samarium oxide-based two-step solar thermochemical water splitting cycle is reported. The analysis is performed using HSC chemistry software and databases. The first (solar-based) step drives the thermal reduction of Sm2O3 into Sm and O2. The second (non-solar) step corresponds to the production of H2 via a water splitting reaction and the oxidation of Sm to Sm2O3. The equilibrium thermodynamic compositions related to the thermal reduction and water splitting steps are determined. The effect of oxygen partial pressure in the inert flushing gas on the thermal reduction temperature (TH) is examined. An analysis based on the second law of thermodynamics is performed to determine the cycle efficiency (ηcycle) and solar-to-fuel energy conversion efficiency (ηsolar´to´fuel) attainable with and without heat recuperation. The results indicate that ηcycle and ηsolar´to´fuel both increase with decreasing TH due to the reduction in oxygen partial pressure in the inert flushing gas. Furthermore the recuperation of heat for the operation of the cycle significantly improves the solar reactor efficiency. For instance in the case where TH = 2280 K ηcycle = 24.4% and ηsolar´to´fuel = 29.5% (without heat recuperation) while ηcycle = 31.3% and ηsolar´to´fuel = 37.8% (with 40% heat recuperation).
Review on the Status of the Research on Power‐to‐Gas Experimental Activities
Aug 2022
Publication
In recent years power‐to‐gas technologies have been gaining ground and are increasingly proving their reliability. The possibility of implementing long‐term energy storage and that of being able to capture and utilize carbon dioxide are currently too important to be ignored. However sys‐ tems of this type are not yet experiencing extensive realization in practice. In this study an overview of the experimental research projects and the research and development activities that are currently part of the power‐to‐gas research line is presented. By means of a bibliographical and sitographical analysis it was possible to identify the characteristics of these projects and their distinctive points. In addition the main research targets distinguishing these projects are presented. This provides an insight into the research direction in this regard where a certain technological maturity has been achieved and where there is still work to be done. The projects found and analyzed amount to 87 mostly at laboratory scale. From these what is most noticeable is that research is currently focusing heavily on improving system efficiency and integration between components.
Present and Projected Developments in Hydrogen Production: A Technological Review
Mar 2022
Publication
Energy supplies that are safe environmentally friendly dependable and cost-effective are important for society's long-term growth and improved living standards though political social and economic barriers may inhibit their availability. Constantly increasing energy demand is induced by substantial population growth and economic development putting an increasing strain on fossil fuel management and sustainability which account for a major portion of this rising energy demand and moreover creates difficulties because of greenhouse gas emissions growth and the depletion of resources. Such impediments necessitate a global shift away from traditional energy sources and toward renewables. Aside from its traditional role is viewed as a promising energy vector and is gaining international attention as a promising fuel path as it provides numerous benefits in use case scenarios and unlike other synthesized carbon-based fuels could be carbon-free or perhaps even negative on a life-cycle criterion. Hydrogen ( ) is one of the most significant chemical substances on earth and can be obtained as molecular dihydrogen through various techniques from both non-renewable and renewable sources. The drive of this paper is to deliver a technological overview of hydrogen production methods. The major challenges development and research priorities and potential prospects for production was discussed.
Everything About Hydrogen Podcast: Producing Hydrogen with Wind Energy
Sep 2022
Publication
On this episode of Everything About Hydrogen we are speaking with David Wellard Regulatory Affairs Manager at Orsted. Orsted is a global leader in renewable energy generation projects particularly when it comes to the rapidly expanding wind energy sector. Headquartered in Denmark the company has a global reach across multiple continents and technologies. David helps lead Orsted’s policy and regulatory engagement in the United Kingdom and beyond. We are excited to have him with us to discuss how Orsted is looking at and deploying hydrogen technologies and how they expect to utilized hydrogen in a decarbonized energy future.
The podcast can be found on their website.
The podcast can be found on their website.
Environmental Sustainability Assessment of Large-scale Hydrogen Production Using Prospective Life Cycle Analysis
Nov 2022
Publication
The need for a rapid transformation to low-carbon economies has rekindled hydrogen as a promising energy carrier. Yet the full range of environmental consequences of large-scale hydrogen production remains unclear. Here prospective life cycle analysis is used to compare different options to produce 500 Mt/yr of hydrogen including scenarios that consider likely changes to future supply chains. The resulting environmental and human health impacts of such production levels are further put into context with the Planetary Boundaries framework known human health burdens the impacts of the world economy and the externality-priced production costs that embody the environmental impact. The results indicate that climate change impacts of projected production levels are 3.3–5.4 times higher than the allocated planetary boundary with only green hydrogen from wind energy staying below the boundary. Human health impacts and other environmental impacts are less severe in comparison but metal depletion and ecotoxicity impacts of green hydrogen deserve further attention. Priced-in environmental damages increase the cost most strongly for blue hydrogen (from ∼2 to ∼5 USD/kg hydrogen) while such true costs drop most strongly for green hydrogen from solar photovoltaic (from ∼7 to ∼3 USD/kg hydrogen) when applying prospective life cycle analysis. This perspective helps to evaluate potentially unintended consequences and contributes to the debate about blue and green hydrogen.
Solar Hydrogen Fuel Generation from Wastewater—Beyond Photoelectrochemical Water Splitting: A Perspective
Oct 2022
Publication
Green hydrogen—a carbon-free renewable fuel—has the capability to decarbonise a variety of sectors. The generation of green hydrogen is currently restricted to water electrolysers. The use of freshwater resources and critical raw materials however limits their use. Alternative water splitting methods for green hydrogen generation via photocatalysis and photoelectrocatalysis (PEC) have been explored in the past few decades; however their commercial potential still remains unexploited due to the high hydrogen generation costs. Novel PEC-based simultaneous generation of green hydrogen and wastewater treatment/high-value product production is therefore seen as an alternative to conventional water splitting. Interestingly the organic/inorganic pollutants in wastewater and biomass favourably act as electron donors and facilitate the dual-functional process of recovering green hydrogen while oxidising the organic matter. The generation of green hydrogen through the dual-functional PEC process opens up opportunities for a “circular economy”. It further enables the end-of-life commodities to be reused recycled and resourced for a better life-cycle design while being economically viable for commercialisation. This review brings together and critically analyses the recent trends towards simultaneous wastewater treatment/biomass reforming while generating hydrogen gas by employing the PEC technology. We have briefly discussed the technical challenges associated with the tandem PEC process new avenues techno-economic feasibility and future directions towards achieving net neutrality.
Green Hydrogen Production Via Electrochemical Conversion of Components from Alkaline Carbohydrate Degradation
Nov 2021
Publication
Water electrolysis is a promising approach for the sustainable production of hydrogen however the unfavorable thermodynamics and sluggish kinetics of oxygen evolution reaction (OER) are associated with high anodic potentials. To lower the required potentials an effective strategy is proposed to substitute OER with partial oxidation of degradation products of carbohydrate origin from the waste stream of a chemical pulping industry. In this work two different catalytic materials e PdNi and NiO are investigated comparatively to understand their catalytic performance for the oxidation of carbohydrate alkaline degradation products (CHADs). PdNi can catalyze CHADs with low potential requirements (0.11 V vs. Hg/HgO at 150 mA cm2 ) but is limited to current densities opportunities to study earth-abundant electrocatalysts to efficiently oxidize biomass-derived substances.
Modular Modeling Method and Power Supply Capability Evaluation for Integrated Hydrogen Production Stations of DC Systems
Mar 2022
Publication
Low-voltage DC distribution system has many advantages such as facilitating the access of DC loads and distributed energies and improving the network’s stability. It has become a new idea for integrated hydrogen production stations. Power supply capacity and small-signal stability are important indexes to evaluate a low-voltage DC integrated system. Based on the master–slave control mode this paper selects the typical star structure as the research object constructs the system transfer function through the scalable modular modeling method and further evaluates the impact of the high-order DC hydrogen production station integrated system on the hydrogen production capacity under the changes of the line length and master station position. The results show that the hydrogen production capacity of the system decreases gradually with the main station moving from side to inside. Finally a practical example is analyzed by MATLAB/Simulink simulation to verify the accuracy of the theory. This study can provide an effective theoretical method for the structure optimization and integrated parameter design of low-voltage DC system
A System-Approach to Data can Help Install Trust and Enable a Net Zero Future
Mar 2021
Publication
Carbon capture and storage (CCS) and hydrogen will be a catalyst to deeply decarbonize the world’s energy system but not for another 15 years according to DNV’s Energy Transition Outlook. Many aspects from policy to technology developments can help to scale these technologies and accelerate the timeline.<br/>In the report A System-Approach to Data can Help Install Trust and Enable a Net Zero Future DNV considers what role data could play to support the initiation execution and operation of CCS and hydrogen projects.<br/>The research is based on interviews with representatives from across the UK energy supply chain. It focuses in particular on the emerging carbon and hydrogen industries and the cross sectoral challenges they face. It explores how data can facilitate the flow of the product both with respect to fiscal and technical risk matters.<br/>The report is intended for anyone involved in or has an interest in CCUS or hydrogen projects and in how data eco-systems will support the efficient operation and the transition to net-zero.<br/>DNV produced the report for and in partnership with the ODI an organization that advocates for the innovative use of open data to affect positive change across the globe.
No more items...