Australia
An Analysis of Emerging Renewable Hydrogen Policy through an Energy Democracy Lens: The Case of Australia
Mar 2024
Publication
As part of reducing carbon emissions governments across the world are working on measures to transition sectors of the economy away from fossil fuels. The socio-technical regimes being constructed around the energy transition can encourage energy centralisation and constrain actor engagement without proper policy and planning. The energy transition is liable to have significant impacts across all of society but less attention has been given to the role of democratic participation and decision-making in the energy system during this time. Using the energy democracy framework developed by Kacper Szulecki we employ content analysis to investigate how Australia’s renewable hydrogen strategies at the Commonwealth and state levels engage with the broader objective of democratising energy systems. Based on our findings we recommend ways to support a renewable hydrogen regime in Australia in line with the principles of energy democracy such as community engagement built-in participation popular sovereignty community-level agency and civic ownership. This study provides a perspective on the energy transition that is often overlooked and a reminder to policymakers that the topology of an energy transition can take many forms.
A Review on Underground Hydrogen Storage: Insight into Geological Sites, Influencing Factors and Future Outlook
Dec 2021
Publication
Without remorse fossil fuels have made a huge contribution to global development in all of its forms. However the recent scientific outlooks are currently shifting as more research is targeted towards promoting a carbon-free economy in addition to the use of electric power from renewable sources. While renewable energy sources may be a solution to the anthropogenic greenhouse gas (GHG) emissions from fossil fuel they are yet season-dependent faced with major atmospheric drawbacks which when combined with annually varying but steady energy demand results in renewable energy excesses or deficits. Therefore it is essential to devise a long-term storage medium to balance their intermittent demand and supply. Hydrogen (H2) as an energy vector has been suggested as a viable method of achieving the objectives of meeting the increasing global energy demand. However successful implementation of a full-scale H2 economy requires large-scale H2 storage (as H2 is highly compressible). As such storage of H2 in geological formations has been considered as a potential solution where it can be withdrawn again at the larger stage for utilization. Thus in this review we focus on the potential use of geological formations for large-scale underground hydrogen storage (UHS) where both conventional and non-conventional UHS options were examined in depth. Also insights into some of the probable sites and the related examined criteria for selection were highlighted. The hydrodynamics of UHS influencing factors (including solid fluid and solid–fluid interactions) are summarized exclusively. In addition the economics and reaction perspectives inherent to UHS have been examined. The findings of this study show that UHS like other storage systems is still in its infancy. Further research and development are needed to address the significant hurdles and research gaps found particularly in replaceable influencing parameters. As a result this study is a valuable resource for UHS researchers.
Blending Ammonia into Hydrogen to Enhance Safety through Reduced Burning Velocity
Sep 2019
Publication
Laminar burning velocities (SL) of hydrogen/ammonia mixtures in air at atmospheric pressure were studied experimentally and numerically. The blending of hydrogen with ammonia two fuels that have been proposed as promising carriers for renewable energy causes the laminar flame speed of the mixture SL to decrease significantly. However details of this have not previously available. Systematic measurements were therefore performed for a series of hydrogen/ammonia mixtures with wide ranges of mole fractions of blended ammonia (XNH3) and equivalence ratio using a heat flux method based on heat flux of a flat flame transferred to the burner surface. It was found that the mixture of XNH3 = 40% has a value of SL close to that of methane which is the dominant component of natural gas. Using three chemical kinetic mechanisms available in the literature i.e. the well-known GRI-Mech 3.0 mechanism and two mechanisms recently released SL were also modelled for the cases studied. However the discrepancies between the experimental and numerical results can exceed 50% with the GRI-Mech 3.0 mechanism. Discrepancies were also found between the numerical results obtained with different mechanisms. These results can contribute to an increase in both the safety and efficiency of the coutilization of these two types of emerging renewable fuel and to guiding the development of better kinetic models.
Carbon Capture and Storage in the USA: The Role of US Innovation Leadership in Climate-technology Commercialization
Nov 2019
Publication
To limit global warming and mitigate climate change the global economy needs to decarbonize and reduce emissions to net-zero by mid-century. The asymmetries of the global energy system necessitate the deployment of a suite of decarbonization technologies and an all-of-the-above approach to deliver the steep CO2 -emissions reductions necessary. Carbon capture and storage (CCS) technologies that capture CO2 from industrial and power-plant point sources as well as the ambient air and store them underground are largely seen as needed to address both the flow of emissions being released and the stock of CO2 already in the atmosphere. Despite the pressing need to commercialize the technologies their large-scale deployment has been slow. Initial deployment however could lead to near-term cost reduction and technology proliferation and lowering of the overall system cost of decarbonization. As of November 2019 more than half of global large-scale CCS facilities are in the USA thanks to a history of sustained government support for the technologies. Recently the USA has seen a raft of new developments on the policy and project side signalling a reinvigorated push to commercialize the technology. Analysing these recent developments using a policy-priorities framework for CCS commercialization developed by the Global CCS Institute the paper assesses the USA’s position to lead large-scale deployment of CCS technologies to commercialization. It concludes that the USA is in a prime position due to the political economic characteristics of its energy economy resource wealth and innovation-driven manufacturing sector.
Communicating Leakage Risk in the Hydrogen Economy: Lessons Already Learned from Geoenergy Industries
Sep 2019
Publication
Hydrogen may play a crucial part in delivering a net zero emissions future. Currently hydrogen production storage transport and utilisation are being explored to scope opportunities and to reduce barriers to market activation. One such barrier could be negative public response to hydrogen technologies. Previous research around socio-technical risks finds that public acceptance issues are particularly challenging for emerging remote technical sensitive uncertain or unfamiliar technologies - such as hydrogen. Thus while the hydrogen value chain could offer a range of potential environmental economic and social benefits each will have perceived risks that could challenge the introduction and subsequent roll-out of hydrogen. These potential issues must be identified and managed so that the hydrogen sector can develop adapt or respond appropriately. Geological storage of hydrogen could present challenges in terms of perceived safety. Valuable lessons can be learned from international research and practice of CO2 and natural gas storage in geological formations (for carbon capture and storage CCS and for power respectively). Here we explore these learnings. We consider the similarities and differences between these technologies and how these may affect perceived risks. We also reflect on lessons for effective communication and community engagement. We draw on this to present potential risks to the perceived safety of - and public acceptability of – the geological storage of hydrogen. One of the key lessons learned from CCS and natural gas storage is that progress is most effective when risk communication and public acceptability is considered from the early stages of technology development.
Early Community Engagement with Hydrogen in Australia
Sep 2019
Publication
Community support and acceptance is part of the licence to operate for any industry. The hydrogen industry is no different and we will need to have strong support from the broad community to establish a viable hydrogen economy in Australia.<br/>As Woodside progresses our plans for bulk hydrogen export and associated domestic opportunities stakeholder engagement throughout will be critical to success. This talk will share Woodside’s approach to community engagement and local opportunities and how we plan to draw on more than 30 years’ experience operating liquefied natural gas plants in Western Australia’s Pilbara region.<br/>At this early stage of our hydrogen work we are beginning with the end in mind: engaging the customer. We’ve worked with local Australian businesses to help raise public awareness and interest in hydrogen by producing prototype consumer products. We will share experiences from this work that underscore the value of early engagement with all stakeholders: government regulators industrial and community neighbours and end consumers to enable the hydrogen economy vision for Australia. This paper will present information on community engagement and acceptance of hydrogen in Australia.<br/>This information has come from Woodside Energy Ltd by engaging with small businesses government regulators and the community at large. As we establish community acceptance for hydrogen as an energy carrier in Australia Woodside has been working in parallel to have standards and regulations established for hydrogen in Australia. Through our work with Hydrogen Mobility Australia we are advocating the adoption of ISO standards unless there is a specific geographic or health safety and environment reason not to.
Hydrogen for Renewable Energy Export: Broadening the Concept of Hydrogen Safety
Sep 2019
Publication
Recently we have seen hydrogen (re)emerge as an important component of widespread decarbonisation of energy sectors. From an Australian perspective this brings with it an opportunity to store transport and export renewable energy—either as liquefied hydrogen or in a carrier such as ammonia. The growth of the hydrogen industry to now include the power and transport sectors as well as the notion of hydrogen export has broadened the range of safety considerations required and seen them extend into the realm of the consumer for the first time.<br/>Hydrogen as well as ammonia and other carriers such as methanol are existing industrial chemicals which have established protocols for their handling and use in the chemicals sector. As their use in energy and transport increases especially in the context of widespread domestic use their handling and use by inexperienced people in less-controlled environments expands shifting the risk profiles and management systems required. There is also the potential for novel hydrogen carriers such as methylcyclohexane/toluene to reach commercial viability at industrial scale.<br/>This paper will discuss some of these emerging applications of hydrogen and its carriers and discuss some of the technological innovations under development that may accompany a new energy industry— with some consideration given to their potential risks and the required safety considerations. In addition we will also provide an overview of global activity in this area and how new standards and regulations would need to be developed for the adaption of these technologies in an Australian context.
Cautiously Optimistic: Understanding the Australian Public’s Response to the Hydrogen Opportunity
Sep 2019
Publication
The increased activity across the technical world for developing hydrogen has not gone unnoticed at the political level. However there remains a gap in understanding of how the general public will respond to the development of such an emergent industry. Recognising this gap we undertook ten focus groups (N=92) and a nationally representative online survey (N=2785) with the Australian public to better understand their response to hydrogen and the opportunities it presents for export and domestic use. In both focus groups and the national survey when Australians first heard the word hydrogen they were most likely to respond with a neutral response. For example in the survey 81% responded with words such as gas energy water; with only 13% giving negative associations (e.g. bomb explosion Hindenburg); and 3% positive (e.g. clean future). Males were more likely to be supportive of hydrogen than females. Those who answered more knowledge questions correctly were also more supportive. The main benefits associated with the use of hydrogen technologies centred around the environment - reduced greenhouse gas emissions and climate change mitigation potential were key benefits. With safety cost and environmental impacts - particularly concerns around pollution emissions and water use - being the most frequently cited concerns about the production and use of hydrogen. This presentation focuses on Australian attitudes to the developing hydrogen export opportunity and also for domestic use. Implications for industry and policy makers will be discussed in light of these Australians responses.
HyP SA – Our safety story
Sep 2019
Publication
Australian Gas Infrastructure Group’s (AGIG’s) vision is to be the leading gas infrastructure business in Australia this means delivering for our customers being a good employer and being sustainably cost efficient. Establishing and developing a hydrogen industry is a key pathway for us to achieve our vision.
In South Australia AGIG is pioneering the introduction of hydrogen into its existing gas distribution networks through the Hydrogen Park South Australia (HyP SA) project. With safety our top priority we would like to give an overview of the safety considerations of our site our network methodology and the development of new safety procedures and culture regarding the production handling and reticulation of a 5% hydrogen blend.
We will cover three themes each having a safety story that is specific to the Australian context and to the project’s success:
The Production Plant and Site
Project site safety known hazards and risk mitigation electrical protection safety procedures lighting and security. Hydrogen storage filling and transportation.
The Network
Securing the network for an isolated safe demonstration footprint. Gas network and hydrogen safety considerations why 5%? Emergency procedures and crew training. New safety regulations blended networks. How does hydrogen perform in a blended gas with respect to leaks? How safe is the existing network and what sensors and controls are we using.
The Home
Introducing blended gas to existing homes. Appliance safety and failure mode analysis. Community engagement and education on a 5% renewable hydrogen gas blend and use in the home
.
We aim to give a comprehensive overview of delivering a safe demonstration network for the HyP SA project in terms of the three main ecosystems that the hydrogen will be present our learnings so far and the development of the safety methodologies that will be applied in the industry in the future.
In South Australia AGIG is pioneering the introduction of hydrogen into its existing gas distribution networks through the Hydrogen Park South Australia (HyP SA) project. With safety our top priority we would like to give an overview of the safety considerations of our site our network methodology and the development of new safety procedures and culture regarding the production handling and reticulation of a 5% hydrogen blend.
We will cover three themes each having a safety story that is specific to the Australian context and to the project’s success:
The Production Plant and Site
Project site safety known hazards and risk mitigation electrical protection safety procedures lighting and security. Hydrogen storage filling and transportation.
The Network
Securing the network for an isolated safe demonstration footprint. Gas network and hydrogen safety considerations why 5%? Emergency procedures and crew training. New safety regulations blended networks. How does hydrogen perform in a blended gas with respect to leaks? How safe is the existing network and what sensors and controls are we using.
The Home
Introducing blended gas to existing homes. Appliance safety and failure mode analysis. Community engagement and education on a 5% renewable hydrogen gas blend and use in the home
.
We aim to give a comprehensive overview of delivering a safe demonstration network for the HyP SA project in terms of the three main ecosystems that the hydrogen will be present our learnings so far and the development of the safety methodologies that will be applied in the industry in the future.
Delivering a Safe, Viable Hydrogen Economy in Australia
Sep 2019
Publication
At Woodside Energy Ltd (Woodside) safety is built into everything we do and progressing hydrogen opportunities is no exception. This paper will present information from the macro level of process safety for hydrogen at a plant level through to the consumer experience. Examples of the benefits of an integrated process safety approach will be used from Woodside’s experience pioneering the liquefied natural gas industry in Australia.<br/>This paper will underscore the reasons why Australia needs to adopt robust safety standards for hydrogen as quickly as possible in order to advance the hydrogen economy across all sectors. Focus areas requiring attention during development of standards and potential mechanisms to close will be proposed. Establishing a hydrogen economy in Australia could lower carbon emissions stabilise power grids increase renewable energy penetration and create jobs. Developing Australian standards that are fully aligned with international standards will facilitate Australia taking a leading role in the global hydrogen economy.
Assessing the Viability of the ACT Natural Gas Distribution Network for Reuse as a Hydrogen Distribution Network
Sep 2019
Publication
The Australian Capital Territory (ACT) has legislated and aims to be net zero emissions by 2045. Such ambitious targets have implications for the contribution of hydrogen and its storage in gas distribution networks Therefore we need to understand now the impacts on the gas distribution network of the transition to 100% hydrogen. Assessment of the viability of decarbonising the ACT gas network will be partly based on the cost of reusing the gas network for the safe and reliable distribution of hydrogen. That task requires each element of the natural gas safety management system to be evaluated.
This article describes the construction of a test facility in Canberra Australia used to identify issues raised by 100% hydrogen use in the medium pressure distribution network consisting of nylon and polyethylene (PE) as a means of identifying measures necessary to ensure ongoing validity of the network's regulatory safety case.
Evoenergy (the ACT's gas distribution company) have constructed a Test Facility incorporating an electrolyser a gas supply pressure reduction and mixing skid a replica gas network and a domestic installation with gas appliances. Jointly with Australian National University (ANU) and Canberra Institute of Technology (CIT) the Company has commenced a program of “bench testing” initially with 100% hydrogen to identify gaps in the safety case specifically focusing on the materials work practices and safety systems in the ACT.
The facility is designed to assess:
The paper addresses major safety issues relating to the production/storage distribution and consumer end use of hydrogen injected into existing gas distribution networks. The analysis is guided by the Safety Management System. The Hydrogen Testing Facility described in the paper provide tools for evaluation of hydrogen safety matters in the ACT and Australia-wide.
Testing to date has confirmed that polyethylene and nylon pipe and their respective jointing techniques can contain 100% hydrogen at pressures used for the distribution of natural gas. Testing has also confirmed that current installation work practices on polyethylene and nylon pipe and joints are suitable for hydrogen service. This finding is subject to variation attributable to staff training and skill levels and further testing has been programmed as outlined in this paper.
Testing of gas isolation by clamping and simulated repair on the hydrogen network has established that standard natural gas isolation techniques work with 100% hydrogen at natural gas pressures.
This article describes the construction of a test facility in Canberra Australia used to identify issues raised by 100% hydrogen use in the medium pressure distribution network consisting of nylon and polyethylene (PE) as a means of identifying measures necessary to ensure ongoing validity of the network's regulatory safety case.
Evoenergy (the ACT's gas distribution company) have constructed a Test Facility incorporating an electrolyser a gas supply pressure reduction and mixing skid a replica gas network and a domestic installation with gas appliances. Jointly with Australian National University (ANU) and Canberra Institute of Technology (CIT) the Company has commenced a program of “bench testing” initially with 100% hydrogen to identify gaps in the safety case specifically focusing on the materials work practices and safety systems in the ACT.
The facility is designed to assess:
- Materials in use including aged network materials and components
- Construction and installation techniques both greenfield and live gas work
- Purging and filling techniques
- Leak detection both underground and above ground
- Emergency response and make safe techniques
- Issues associated with use of hydrogen in light commercial and domestic appliances.
- Technicians and gas fitters on infrastructure installation and management
- Emergency response services on responding to hydrogen related emergencies in a network environment; and
- Manage public perceptions of hydrogen in a network environment.
The paper addresses major safety issues relating to the production/storage distribution and consumer end use of hydrogen injected into existing gas distribution networks. The analysis is guided by the Safety Management System. The Hydrogen Testing Facility described in the paper provide tools for evaluation of hydrogen safety matters in the ACT and Australia-wide.
Testing to date has confirmed that polyethylene and nylon pipe and their respective jointing techniques can contain 100% hydrogen at pressures used for the distribution of natural gas. Testing has also confirmed that current installation work practices on polyethylene and nylon pipe and joints are suitable for hydrogen service. This finding is subject to variation attributable to staff training and skill levels and further testing has been programmed as outlined in this paper.
Testing of gas isolation by clamping and simulated repair on the hydrogen network has established that standard natural gas isolation techniques work with 100% hydrogen at natural gas pressures.
Hydrogen Energy Demand Growth Prediction and Assessment (2021–2050) Using a System Thinking and System Dynamics Approach
Jan 2022
Publication
Adoption of hydrogen energy as an alternative to fossil fuels could be a major step towards decarbonising and fulfilling the needs of the energy sector. Hydrogen can be an ideal alternative for many fields compared with other alternatives. However there are many potential environmental challenges that are not limited to production and distribution systems but they also focus on how hydrogen is used through fuel cells and combustion pathways. The use of hydrogen has received little attention in research and policy which may explain the widely claimed belief that nothing but water is released as a by-product when hydrogen energy is used. We adopt systems thinking and system dynamics approaches to construct a conceptual model for hydrogen energy with a special focus on the pathways of hydrogen use to assess the potential unintended consequences and possible interventions; to highlight the possible growth of hydrogen energy by 2050. The results indicate that the combustion pathway may increase the risk of the adoption of hydrogen as a combustion fuel as it produces NOx which is a key air pollutant that causes environmental deterioration which may limit the application of a combustion pathway if no intervention is made. The results indicate that the potential range of global hydrogen demand is rising ranging from 73 to 158 Mt in 2030 73 to 300 Mt in 2040 and 73 to 568 Mt in 2050 depending on the scenario presented.
Australia's National Hydrogen Strategy
Nov 2019
Publication
Australia’s National Hydrogen Strategy sets a vision for a clean innovative safe and competitive hydrogen industry that benefits all Australians. It aims to position our industry as a major player by 2030.<br/>The strategy outlines an adaptive approach that equips Australia to scale up quickly as the hydrogen market grows. It includes a set of nationally coordinated actions involving governments industry and the community.
Autoignition of Hydrogen/Ammonia Blends at Elevated Pressures and Temperatures
Sep 2019
Publication
Hydrogen stored or transported as ammonia has been proposed as a sustainable carbon-free alternative for fossil-fuels in high-temperature industrial processes including power generation. Although ammonia itself is toxic and exhibits both a low flame speed and calorific value it rapidly decomposes to hydrogen in high temperature environments suggesting the potential use in applications which incorporate fuel preheating. In this work the rate of ammonia-to-hydrogen decomposition is initially simulated at elevated temperatures to indicate the proportion of fuel conversion in conditions similar to gas pipelines gas-turbines or furnaces with exhaust-gas recirculation. Following this different proportions of hydrogen and ammonia are numerically simulated in independent zero-dimensional plug-flow-reactors at pressures ranging from atmospheric to 50 MPa and pre-heating temperatures from 600 K to 1600 K. Deflagration of very-lean-to-fuel-rich mixtures was investigated employing air as the oxidant stream. Analyses of these reactors provide estimates of autoignition thresholds of the hydrogen/ammonia blends which are relevant for the safe implementation and operation of hydrogen/ammonia blends or pure ammonia as a fuel source. Further operational considerations are subsequently identified for using ammonia or hydrogen/ammonia blends as a hydrogen fuel carrier by quantifying residual concentrations of hydrogen and ammonia fuel products as well as other toxic emissions within the hot exhaust products.
Open-cathode PEMFC Heat Utilisation to Enhance Hydrogen Supply Rate of Metal Hydride Canisters
Mar 2019
Publication
In this paper the hydrogen supply to an open-cathode PEM fuel cell (FC) by using metal hydride (MH) storage and thermal coupling between these two components are investigated theoretically. One of the challenges in using MH hydrogen storage canisters is their limited hydrogen supply rate as the hydrogen release from MH is an endothermic reaction. Therefore in order to meet the required hydrogen supply rate high amounts of MH should be employed that usually suggests storage of hydrogen to be higher than necessary for the application adding to the size weight and cost of the system. On the other hand the exhaust heat (i.e. that is usually wasted if not utilised for this purpose) from open-cathode FCs is a low-grade heat. However this heat can be transferred to MH canisters through convection to heat them up and increase their hydrogen release rate. A mathematical model is used to simulate the heat transfer between PEMFC exhaust heat and MH storage. This enables the prediction of the required MH for different FC power levels with and without heat supply to the MH storage. A 2.5-kW open-cathode FC is used to measure the exhaust air temperature at different output powers. It was found that in the absence of heat supply from the FC to the MH canisters significantly higher number of MH canisters are required to achieve the required rate of hydrogen supply to the FC for sustained operation (specially at high power outputs). However using the exhaust hot air from the FC to supply heat to the MH storage can reduce the number of the MH canisters required by around 40% to 70% for power output levels ranging from 500 W to 2000 W.
Designing Optimal Integrated Electricity Supply Configurations for Renewable hydrogen Generation in Australia
Jun 2021
Publication
The high variability and intermittency of wind and solar farms raise questions of how to operate electrolyzers reliably economically and sustainably using pre-dominantly or exclusively variable renewables. To address these questions we develop a comprehensive cost framework that extends to include factors such as performance degradation efficiency financing rates and indirect costs to assess the economics of 10 MW scale alkaline and proton-exchange membrane electrolyzers to generate hydrogen. Our scenario analysis explores a range of operational configurations considering (i) current and projected wholesale electricity market data from the Australian National Electricity Market (ii) existing so-lar/wind farm generation curves and (iii) electrolyzer capital costs/performance to determine costs of H2production in the near (2020–2040) and long term(2030–2050). Furthermore we analyze dedicated off-grid integrated electro-lyzer plants as an alternate operating scenario suggesting oversizing renewable nameplate capacity with respect to the electrolyzer to enhance operational capacity factors and achieving more economical electrolyzer operation.
A Critical Study of Stationary Energy Storage Policies in Australia in an International Context: The Role of Hydrogen and Battery Technologies
Aug 2016
Publication
This paper provides a critical study of current Australian and leading international policies aimed at supporting electrical energy storage for stationary power applications with a focus on battery and hydrogen storage technologies. It demonstrates that global leaders such as Germany and the U.S. are actively taking steps to support energy storage technologies through policy and regulatory change. This is principally to integrate increasing amounts of intermittent renewable energy (wind and solar) that will be required to meet high renewable energy targets. The relevance of this to the Australian energy market is that whilst it is unique it does have aspects in common with the energy markets of these global leaders. This includes regions of high concentrations of intermittent renewable energy (Texas and California) and high penetration rates of residential solar photovoltaics (PV) (Germany). Therefore Australian policy makers have a good opportunity to observe what is working in an international context to support energy storage. These learnings can then be used to help shape future policy directions and guide Australia along the path to a sustainable energy future.
Where Does Hydrogen Fit in a Sustainable Energy Economy?
Jul 2012
Publication
Where does hydrogen fit into a global sustainable energy strategy for the 21st century as we face the enormous challenges of irreversible climate change and uncertain oil supply? This fundamental question is addressed by sketching a sustainable energy strategy that is based predominantly on renewable energy inputs and energy efficiency with hydrogen playing a crucial and substantial role. But this role is not an ex -distributed hydrogen production storage and distribution centres relying on local renewable energy sources and feedstocks would be created to avoid the need for an expensive long-distance hydrogen pipeline system. There would thus be complementary use of electricity and hydrogen as energy vectors. Importantly bulk hydrogen storage would provide the strategic energy reserve to guarantee national and global energy security in a world relying increasingly on renewable energy; and longer-term seasonal storage on electricity grids relying mainly on renewables. In the transport sector a 'horses for courses' approach is proposed in which hydrogen fuel cell vehicles would be used in road and rail vehicles requiring a range comparable to today's petrol and diesel vehicles and in coastal and international shipping while liquid hydrogen would probably have to be used in air transport. Plug-in battery electric vehicles would be reserved for shorter-trips. Energy-economic-environmental modelling is recommended as the next step to quantify the net benefits of the overall strategy outlined.
Electric and Hydrogen Buses: Shifting from Conventionally Fuelled Cars in the UK
May 2020
Publication
For the UK to meet their national target of net zero emissions as part of the central Paris Agreement target further emphasis needs to be placed on decarbonizing public transport and moving away from personal transport (conventionally fuelled vehicles (CFVs) and electric vehicles (EVs)). Electric buses (EBs) and hydrogen buses (HBs) have the potential to fulfil requirements if powered from low carbon renewable energy sources.
A comparison of carbon dioxide (CO2) emissions produced from conventionally fuelled buses (CFB) EBs and HBs between 2017 and 2050 under four National Grid electricity scenarios was conducted. In addition emissions per person at different vehicle capacity levels (100% 75% 50% and 25%) were projected for CFBs HBs EBs and personal transport assuming a maximum of 80 passengers per bus and four per personal vehicle.
Results indicated that CFVs produced 30 g CO2km−1 per person compared to 16.3 g CO2 km−1 per person by CFBs by 2050. At 100% capacity under the two-degree scenario CFB emissions were 36 times higher than EBs 9 times higher than HBs and 12 times higher than EVs in 2050. Cumulative emissions under all electricity scenarios remained lower for EBs and HBs.
Policy makers need to focus on encouraging a modal shift from personal transport towards sustainable public transport primarily EBs as the lowest level emitting vehicle type. Simple electrification of personal vehicles will not meet the required targets. Simultaneously CFBs need to be replaced with EBs and HBs if the UK is going to meet emission targets.
A comparison of carbon dioxide (CO2) emissions produced from conventionally fuelled buses (CFB) EBs and HBs between 2017 and 2050 under four National Grid electricity scenarios was conducted. In addition emissions per person at different vehicle capacity levels (100% 75% 50% and 25%) were projected for CFBs HBs EBs and personal transport assuming a maximum of 80 passengers per bus and four per personal vehicle.
Results indicated that CFVs produced 30 g CO2km−1 per person compared to 16.3 g CO2 km−1 per person by CFBs by 2050. At 100% capacity under the two-degree scenario CFB emissions were 36 times higher than EBs 9 times higher than HBs and 12 times higher than EVs in 2050. Cumulative emissions under all electricity scenarios remained lower for EBs and HBs.
Policy makers need to focus on encouraging a modal shift from personal transport towards sustainable public transport primarily EBs as the lowest level emitting vehicle type. Simple electrification of personal vehicles will not meet the required targets. Simultaneously CFBs need to be replaced with EBs and HBs if the UK is going to meet emission targets.
No more items...