China, People’s Republic

The hydrogen production technology by wind power is an effective mean to improve the utilization of wind energy and alleviate the problem of wind power curtailment. First the basic principles and technical characteristics of the hydrogen production technology by wind power are briefly introduced. Then the history of the hydrogen production technology is reviewed and on this basis the hydrogen production system by wind power is elaborated in detail. In addition the prospect of the application of the hydrogen production technology by wind power is analyzed and discussed. In the end the key technology of the hydrogen production by wind power and the problems to be solved are comprehensively reviewed. The development of hydrogen production technology by wind power is analyzed from many aspects which provides reference for future development of hydrogen production technology by wind power

Hydrogen energy attracts an amount of attention as an environmentally friendly and sustainable energy source. However hydrogen is also flammable. Hydrogen fires and explosions might occur in wet-dust-removal systems if accumulated aluminum dust reacts with water. Hydrogen inhibition is a safe method to address these issues. For this purpose we used sodium citrate a renewable and nontoxic raw material to inhibit H2 formation. Specifically hydrogen inhibition experiments with sodium citrate were carried out using custom-built equipment developed by our research group. When the concentration of sodium citrate solution was in the range of 0.4–4.0 g/L a protective coating was formed on the surface of the Al particles which prevented them from contacting with water. The inhibitory effect was achieved when the concentration of sodium citrate was in a certain range and too much or too little addition may reduce the inhibitory effect. In this paper we also discuss the economic aspects of H2 inhibition with this method because it offers excellent safety advantages and could be incorporated on a large scale. Such an intrinsic safety design of H2 inhibition to control explosions in wet-dust-removal systems could be applied to ensure the safety of other systems such as nuclear reactors.

The development of hydrogen energy is an effective solution to the energy and environmental crisis. Hydrogen fuel cells and energy storage cells as hybrid power have broad application prospects in the field of vehicle power. Energy management strategies are key technologies for fuel cell hybrid systems. The traditional optimization strategy is generally based on optimization under the global operating conditions. The purpose of this project is to develop a power allocation optimization method based on real-time load forecasting for fuel cell/lithium battery hybrid electric vehicles which does not depend on specific working conditions or causal control methods. This paper presents an energy-management algorithm based on real-time load forecasting using GRU neural networks to predict load requirements in the short time domain and then the local optimization problem for each predictive domain is solved using a method based on Pontryagin’s minimum principle (PMP). The algorithm adopts the idea of model prediction control (MPC) to transform the global optimization problem into a series of local optimization problems. The simulation results show that the proposed strategy can achieve a good fuel-saving control effect. Compared with the rule-based strategy and equivalent hydrogen consumption strategy (ECMS) the fuel consumption is lower under two typical urban conditions. In the 1800 s driving cycle under WTCL conditions the fuel consumption under the MPC-PMP strategy is 22.4% lower than that based on the ECMS strategy and 10.3% lower than the rules-based strategy. Under CTLT conditions the fuel consumption of the MPC-PMP strategy is 13.12% lower than that of the rule-based strategy and 3.01% lower than the ECMS strategy.

Direct containment heating (DCH) is one of the potential factors leading to early containment failure. DCH is closely related to safety analysis and containment performance evaluation of nuclear power plants. In this study a DCH prediction program was developed to analyze the DCH loads of containment vessel. The phenomenological model of debris dispersal metal oxidation reaction debris-atmospheric heat transfer and hydrogen jet burn was established. Code assessment was performed by comparing with several separate effect tests and integral effect tests. The comparison between the predicted results and experimental data shows that the program can predict the key parameters such as peak pressure temperature and hydrogen production in containment well and for most comparisons the relative errors can be maintained within 20%. Among them the prediction uncertainty of hydrogen production is slightly larger. The analysis shows that the main sources of the error are the difference of time scale and the oxidation of cavity debris.

Water splitting has been regarded as a sustainable and environmentally-friendly technique to realize green hydrogen generation while more energy is consumed due to the high overpotentials required for the anode oxygen evolution reaction. Urea electrooxidation an ideal substitute is thus received increasing attention in assisting water-splitting reactions. Note that highly efficient catalysts are still required to drive urea oxidation and the facile generation of high valence state species is significant in the reaction based on the electrochemical-chemical mechanisms. The high cost and rareness make the noble metal catalysts impossible for further consideration in large-scale application. Ni-based catalysts are very promising due to their cheap price facile structure tuning good compatibility and easy active phase formation. In the light of the significant advances made recently herein we reviewed the recent advances of Ni-based powder catalysts for urea oxidation in assisting water-splitting reaction. The fundamental of urea oxidation is firstly presented to clarify the mechanism of urea-assisted water splitting and then the prevailing evaluation indicators are briefly expressed based on the electrochemical measurements. The catalyst design principle including synergistic effect electronic effect defect construction and surface reconstruction as well as the main fabrication approaches are presented and the advances of various Ni-based powder catalysts for urea assisted water splitting are summarized and discussed. The problems and challenges are also concluded for the Ni-based powder catalysts fabrication the performance evaluation and their application. Considering the key influence factors for catalytic process and their application attention should be given to structure-property relationship deciphering novel Ni-based powder catalysts development and their construction in the real device; specifically the effort should be directed to the Ni-based powder catalyst with multi-functions to simultaneously promote the fundamental steps and high anti-corrosion ability by revealing the local structure reconstruction as well as the integration in the practical application. We believe the current summarization will be instructive and helpful for the Ni-based powder catalysts development and understanding their catalytic action for urea-assisted hydrogen generation via water splitting technique.

The combustion emissions of the hydrogen-fueled engines are very clean but the problems of abnormal combustion and high NOx emissions limit their applications. Nowadays hydrogen engines use exhaust gas recirculation (EGR) technology to control the intensity of premixed combustion and reduce the NOx emissions. This study aims at improving the abnormal combustion and decreasing the NOx emissions of the hydrogen engine by applying a three-dimensional (3D) computational fluid dynamics (CFD) model of a single-cylinder hydrogen-fueled engine equipped with an EGR system. The results indicated that peak in-cylinder pressure continuously increased with the increase of the ignition advance angle and was closer to the top dead center (TDC). In addition the mixture was burned violently near the theoretical air–fuel ratio and the combustion duration was shortened. Moreover the NOx emissions the average pressure and the in-cylinder temperature decreased as the EGR ratio increased. Furthermore increasing the EGR ratio led to an increase in the combustion duration and a decrease in the peak heat release rate. EGR system could delay the spontaneous combustion reaction of the end-gas and reduce the probability of knocking. The pressure rise rate was controlled and the in-cylinder hot spots were reduced by the EGR system which could suppress the occurrence of the pre-ignition in the hydrogen engine.

The composites comprised of Co nanoparticle and C nanosheet were prepared though a high-temperature carbonization reaction. The catalysis of Co@C composites on the hydrogen storage behavior of Mg₉₀Ce₅Y₅ alloy was investigated in detail by XRD SEM TEM PCI and DSC method. Because of the synergistic catalytic function of C and Co in C@Co nanocomposites the Mg₉₀Ce₅Y₅ alloy with 10 wt.% C@Co shows the excellent hydrogen absorption and desorption performances. Time for releasing hydrogen reduces from 150 min to 11 min with the addition of the C@Co composites at the temperature of 300 °C. Meanwhile the dehydrogenation activation energy also declines from 130.3 to 81.9 kJ mol−1 H₂ after the addition of the C@Co composites. This positive effect attributes to the C layer with the high defect density and the Co nanoparticles which reduces the energy barriers for the nucleation of Mg/MgH₂ phase and the recombination of hydrogen molecule. Besides the C@Co composites also improve the activation property of the Mg₉₀Ce₅Y₅ alloy which was fully activated in the first cycle. Moreover the temperature for initial dehydrogenation and the endothermic peak of the alloy hydride were also decreased. Although the addition of the C@Co composites increases the plateau pressures and decreases the value of the decomposition enthalpy these differences are so small that the improvement on thermodynamics can hardly be seen.

According to new findings the use of alternative energy sources such as wind energy is needed to supply the energy demand of future generations. On the other hand combined renewable energy systems can be more efficient than their stand-alone systems. Therefore clean energy-based hybrid energy systems can be a suitable solution for fossil fuels. However for their widespread commercialization more detailed and powerful studies are needed. On the other hand in order to attain sustainable development for the use of renewable energy sources due to their nature energy storage is required. The motivation of this study is introduce and examine a new energy system performance for the production of electricity and hydrogen fuel as well as energy storage. So this paper presents the energy and exergy operation of a hybrid wind turbine water electrolyzer and Pumped-hydro-compressed air system. The electricity produced by the wind turbine is used to produce hydrogen fuel in electrolyzer and the excess energy is stored using the storage system. It was found that the electrolyzer needed 512.6 W of electricity to generate 5 mol/h of hydrogen fuel which was supplied by a 10 kW-wind turbine. In such a context the efficiency of the process was 74.93%. Furthermore on average the isothermal process requires 17.53% less storage capacity than the isentropic process. The effect of key parameters such as rate of hydrogen fuel production operating pressures wind speed and components efficiency on the process operation is also examined.

Hydrogen embrittlement (HE) is a critical issue that hinders the reliability of hydrogenation reactors. Hence it is of great significance to investigate the effect of hydrogen on fracture toughness of 2.25Cr-1Mo-0.25V steel and weld. In this work the fracture behavior of 2.25Cr-1Mo-0.25V steel and welds was studied by three-point bending tests under hydrogen-free and hydrogen-charged conditions. The immersion charging method was employed to pre-charge hydrogen inside specimen and the fracture toughness of these joints was evaluated quantitatively. The microstructure and grain size of the specimens were observed by scanning electron microscopy (SEM) and by metallurgical microscopy to investigate the HE mechanisms. It was found that fracture toughness for both the base metal (BM) and the weld zone (WZ) significantly decreased under hydrogen-charged conditions due to the coexistence of the hydrogen-enhanced decohesion (HEDE) and hydrogen-enhanced localized plasticity (HELP) mechanisms. Moreover the formation and growth of primary voids were observed in the BM leading to a superior fracture toughness. In addition the BM compared to the WZ shows superior resistance to HE because the finer grain size in the BM leads to a larger grain boundary area thus distributing more of the diffusive hydrogen trapped in the grain boundary and reducing the hydrogen content.

This study is a review of hydrogen station patents using the Derwent Innovation system and also a secondary screening. This was undertaken by the researchers to better understand and identify hydrogen station trends. The review focuses on analyzing the developing trends of patent technologies associated with a hydrogen station. The results of the review indicated that the countries with the major distribution of patents were Japan China the USA and Europe. Japan is leading the developmental trajectory of hydrogen stations. The results of the analysis found the leading developers of these patented technologies are Kobe Steel Nippon Oil Toyota and Honda. Other active patent developers analyzed include Linde Hyundai and Texaco. The review concludes with a suggestion that using a patent analysis methodology is a good starting point to identify evaluate and measure the trend in hydrogen station commercial development.