China, People’s Republic

Hydrogen storage in solid-state materials is believed to be a most promising hydrogen-storage technology for high efficiency low risk and low cost. Mg(BH4)2 is regarded as one of most potential materials in hydrogen storage areas in view of its high hydrogen capacities (14.9 wt% and 145–147 kg cm3 ). However the drawbacks of Mg(BH4)2 including high desorption temperatures (about 250 C–580 C) sluggish kinetics and poor reversibility make it difficult to be used for onboard hydrogen storage of fuel cell vehicles. A lot of researches on improving the dehydrogenation reaction thermodynamics and kinetics have been done mainly including: additives or catalysts doping nanoconfining Mg(BH4)2 in nanoporous hosts forming reactive hydrides systems multi-cation/anion composites or other derivatives of Mg(BH4)2. Some favorable results have been obtained. This review provides an overview of current research progress in magnesium borohydride including: synthesis methods crystal structures decomposition behaviors as well as emphasized performance improvements for hydrogen storage.

Metal oxide semiconductor (MOS) is promising in developing hydrogen detectors. However typical MOS materials usually work between 200-500°C which not only restricts their application in flammable and explosive gases detection but also weakens sensor stability and causes high power consumption. This paper studies the sensing properties of UV enhanced Pd-SnO2 nano-spherical composites at 80-360 ℃. In the experiment Pd of different molar ratios (0.5 2.5 5.0 10.0) was doped into uniform spherical SnO2 nanoparticles by a hydrothermal synthesis method. A xenon lamp with a filter was used as the ultraviolet excitation light source to examine the response of the spherical Pd- SnO2 nanocomposite to 50-1000 ppm H2 gas. The influence of different intensities of ultraviolet light on the gas-sensing properties of composite materials compared with dark condition was analyzed. The experiments show that the conductivity of the composites can be greatly stabilized and the thermal excitation temperature can be reduced to 180 ℃ under the effect of UV enhancement. A rapid response (4.4/ 17.4 s) to 200 ppm of H2 at 330 °C can be achieved by the Pd-SnO2 nanocomposites with UV assistance. The mechanism may be attributed to light motivated electron-hole pairs due to built-in electric fields under UV light illumination which can be captured by target gases and lead to UV controlled gas sensing performance. Catalytic active sites of hydrogen are provided on the surface of the mixed material by Pd. The results in this study can be helpful in reducing the response temperature of MOS materials and improving the performance of hydrogen detectors."

This study focuses on a renewable energy power plant equipped with electrolytic hydrogen production system aiming to optimize energy management to smooth renewable energy generation fluctuations participate in peak shaving auxiliary services and increase the absorption space for renewable energy. A multi-objective energy management model and corresponding algorithms were developed incorporating considerations of cost pricing and the operational constraints of a renewable energy generating unit and electrolytic hydrogen production system. By introducing uncertain programming the uncertainty issues associated with renewable energy output were successfully addressed and an improved particle swarm optimization algorithm was employed for solving. A simulation system established on the Matlab platform verified the effectiveness of the model and algorithms demonstrating that this approach can effectively meet the demands of the electricity market while enhancing the utilization rate of renewable energies.

Hydrogen as fuel has been considered as a feasible energy carry and which offers a clean and efficient alternative for transportation. During the high pressure filling the temperature in the hydrogen storage tank (HST) may rise rapidly due to the hydrogen compression. The high temperature may lead to safety problem. Thus for fast and safely refueling the hydrogen several key factors need to be considered. In the present study by the thermodynamics theories a mathematical model is established to simulate and analyze the high pressure filling process of the storage tank for the hydrogen station. In the analysis the physical parameters of normal hydrogen are introduced to make the simulation close to the actual process. By the numerical simulation for 50 MPa compressed hydrogen tank the temperature and pressure trends during filling are obtained. The simulation results for non-adiabatic filling were compared with the theoretically calculated ones for adiabatic conditions and the simulation results for non-adiabatic filling were compared with the simulation ones for adiabatic conditions. Then the influence of working pressure initial temperature mass flow rate initial pressure and inlet temperature on the temperature rise were analyzed. This study provides a theoretical research basis for high pressure hydrogen energy storage and hydrogenation technology.

Adding hydrogen to the fuel can change the combustion characteristics and greatly improve the pollutants emission for the gas turbine. The numerical method was adopted to study the combustion process in a counter-flow combustor of a 100 kW micro gas turbine using methane doped by hydrogen and various distribution schemes of air flow. The combustion characteristics and pollutant emissions were explored to ascertain the influence of air distribution based on solving the validated models. It was shown that as the amount of premixed air increased in the swirling gas the range of the recirculation region became larger and the range of the high-temperature zone in the combustion chamber gradually enlarged. When the amount of premixed air was 30% the outlet temperature distribution of the combustor was excellent and the average temperature was 1172 K. Moreover the concentration of NOX gradually increased and reached a maximum value of 23.46 ppm (@15% O2) as the premixed air increased in the range of the ratio less than 40%. It was reduced to 0.717 ppm (@15% O2) when the amount of premixed air increased to 50%. These findings may support the running of the micro gas turbine using the hybrid fuel of hydrogen and methane.

Hydrogen has emerged as a new energy vector beyond its usual role as an industrial feedstock primarily for the production of ammonia methanol and petroleum refining. In addition to environmental sustainability issues energy-scarce developed countries such as Japan and Korea are also facing an energy security issue and hydrogen or hydrogen carriers such as ammonia and methylcyclohexane seem to be options to address these long-term energy availability issues. China has been eagerly developing renewable energy and hydrogen infrastructure to meet their sustainability goals and the growing energy demand. In this review we focus on hydrogen electrification through proton-exchange membrane fuel cells (PEMFCs) which are widely believed to be commercially suitable for automotive applications particularly for vehicles requiring minimal hydrogen infrastructure support such as fleets of taxies buses and logistic vehicles. This review covers all the key components of PEMFCs thermal and water management and related characterization techniques. A special consideration of PEMFCs in automotive applications is the highlight of this work leading to the infrastructure development for hydrogen generation storage and transportation. Furthermore national strategies toward the use of hydrogen are reviewed thereby setting the rationale for the hydrogen economy.

Through data mining and analysis of the word frequency and occurrence position of industrial policy keywords the main policy parameters affecting industrial development are determined and the functional relationship between industrial policy and industrial development is obtained through multi-parameter non-linear regression: Yit−1 (y1 y2 y3 y4 y5) = β1it X1 + β2it ln X2 + β3it ln X3 + β4it X1it ∗ ln X3 + εit . The time series function of the industrial development index: Y (t) = 0.174 ∗ e (0.256∗t) is established and the industrial development under the influence of next year’s policy is predicted. It is concluded from the mathematical expression of the statistical model that there is a certain coupling effect between different policies and that industrial development is influenced by the joint effect on the parent and sub-industries. This ultimately proves that there is a clear correlation between policy and industry development.

In the fast filling process in order to control the temperature of the vehicle-mounted storage tank not to exceed the upper limit of 85 ◦C it is an effective method to add a hydrogen pre-cooling system upstream of the hydrogenation machine. In this paper Fluent is used to simulate the heat transfer process of high-pressure hydrogen in a shell-and-tube heat exchanger and the phase change process of refrigerant R23. The accuracy of the model is proven by a comparison with the data in the references. Using this model the temperature field and gas volume fraction in the heat transfer process are obtained which is helpful to analyze the heat transfer mechanism. At the same time the influence of hydrogen inlet temperature hydrogen inlet pressure and refrigerant flow rate on the refrigeration performance was studied. The current work shows that the model can be used to determine the best working parameters in the pre-cooling process and reduce the operating cost of the hydrogen refueling station.

Hydrogen safety is an important topic for hydrogen energy application. Unintended hydrogen releases and combustions are potential accident scenarios which are of great interest for developing and updating the safety codes and standards. In this paper hydrogen releases and delayed ignitions were studied.

The concerns over food security and protein scarcity driven by population increase and higher standards of living have pushed scientists toward finding new protein sources. A considerable proportion of resources and agricultural lands are currently dedicated to proteinaceous feed production to raise livestock and poultry for human consumption. The 1st generation of microbial protein (MP) came into the market as land-independent proteinaceous feed for livestock and aquaculture. However MP may be a less sustainable alternative to conventional feeds such as soybean meal and fishmeal because this technology currently requires natural gas and synthetic chemicals. These challenges have directed researchers toward the production of 2nd generation MP by integrating renewable energies anaerobic digestion nutrient recovery biogas cleaning and upgrading carbon-capture technologies and fermentation. The fermentation of methane-oxidizing bacteria (MOB) and hydrogen-oxidizing bacteria (HOB) i.e. two protein rich microorganisms has shown a great potential on the one hand to upcycle effluents from anaerobic digestion into protein rich biomass and on the other hand to be coupled to renewable energy systems under the concept of Power-to-X. This work compares various production routes for 2nd generation MP by reviewing the latest studies conducted in this context and introducing the state-of-the-art technologies hoping that the findings can accelerate and facilitate upscaling of MP production. The results show that 2nd generation MP depends on the expansion of renewable energies. In countries with high penetration of renewable electricity such as Nordic countries off-peak surplus electricity can be used within MP-industry by supplying electrolytic H2 which is the driving factor for both MOB and HOB-based MP production. However nutrient recovery technologies are the heart of the 2nd generation MP industry as they determine the process costs and quality of the final product. Although huge attempts have been made to date in this context some bottlenecks such as immature nutrient recovery technologies less efficient fermenters with insufficient gas-to-liquid transfer and costly electrolytic hydrogen production and storage have hindered the scale up of MP production. Furthermore further research into techno-economic feasibility and life cycle assessment (LCA) of coupled technologies is still needed to identify key points for improvement and thereby secure a sustainable production system.