China, People’s Republic
Life Cycle Greenhouse Gas Emission Assessment for Using Alternative Marine Fuels: A Very Large Crude Carrier (VLCC) Case Study
Dec 2022
Publication
The International Maritime Organization (IMO) has set decarbonisation goals for the shipping industry. As a result shipowners and operators are preparing to use low- or zero-carbon alternative fuels. The greenhouse gas (GHG) emission performances are fundamental for choosing suitable marine fuels. However the current regulations adopt tank-to-wake (TTW) emission assessment methods that could misrepresent the total climate impacts of fuels. To better understand the well-to-wake (WTW) GHG emission performances this work applied the life cycle assessment (LCA) method to a very large crude carrier (VLCC) sailing between the Middle East and China to investigate the emissions. The life cycle GHG emission impacts of using alternative fuels including liquified natural gas (LNG) methanol and ammonia were evaluated and compared with using marine gas oil (MGO). The bunkering site of the VLCC was in Zhoushan port China. The MGO and LNG were imported from overseas while methanol and ammonia were produced in China. Four production pathways for methanol and three production pathways for ammonia were examined. The results showed that compared with MGO using fossil energy-based methanol and ammonia has no positive effect in terms of annual WTW GHG emissions. The emission reduction effects of fuels ranking from highest to lowest were full solar and battery-based methanol full solar and battery-based ammonia and LNG. Because marine ammonia-fuelled engines have not been commercialised laboratory data were used to evaluate the nitrous oxide (N2O) emissions. The GHG emission reduction potential of ammonia can be exploited more effectively if the N2O emitted from engines is captured and disposed of through after-treatment technologies. This paper discussed three scenarios of N2O emission abatement ratios of 30% 50% and 90%. The resulting emission reduction effects showed that using full solar and battery-based ammonia with 90% N2O abatement performs better than using full solar and battery-based methanol. The main innovation of this work is realising the LCA GHG emission assessment for a deep-sea ship.
Low-carbon Economic Operation of IES Based on Life Cycle Method and Hydrogen Energy Utilization
Aug 2023
Publication
The Integrated Energy System (IES) that coordinates multiple energy sources can effectively improve energy utilization and is of great significance to achieving energy conservation and emission reduction goals. In this context a low-carbon and economic dispatch model for IES is proposed. Firstly a hydrogen energy-based IES (H2-IES) is constructed to refine the utilization process of hydrogen energy. Secondly the carbon emissions of different energy chains throughout their life cycle are analyzed using the life cycle assessment method (LCA) and the carbon emissions of the entire energy supply and demand chain are considered. Finally a staged carbon trading mechanism is adopted to promote energy conservation and emission reduction. Based on this an IES low-carbon and economic dispatch model is constructed with the optimization goal of minimizing the sum of carbon trading costs energy procurement costs and hydrogen sales revenue while considering network constraints and constraints on key equipment. By analyzing the model under different scenarios the introduction of life cycle assessment staged carbon trading and hydrogen energy utilization is shown to promote low-carbon and economic development of the comprehensive energy system.
Hydrogen-electricity Hybrid Energy Pipelines for Railway Transportation: Design and Economic Evaluation
Mar 2024
Publication
With the decarbonization and electrification of modern railway transportation the demand for both the highcapacity electrical energy and hydrogen fuel energy is increasingly high. A novel scheme was proposed from liquid hydrogen production by surplus wind and solar energy to liquid hydrogen-electricity hybrid energy transmission for railway transportation. The 100 MW hybrid energy transmission pipeline was designed with the 10 kA/1.5 kV superconducting DC cable for electricity and cryogenic layers for liquid hydrogen and liquid nitrogen showing strong capability in transmitting “electricity + cold energy + chemical energy” simultaneously. Economic evaluation was performed with respect to the energy equipment capacity and costs with sensitivity and profitability analysis. With the discount rate 8% the dynamic payback period of the hybrid energy pipeline was 7.1 years. Results indicated that the shortest dynamic payback period of the hybrid energy pipeline was 4.8 years with the maximum transmission distance 93 km. Overall this article shows the novel concept and design of liquid hydrogen-electricity hybrid energy pipelines and proves the technical and economic feasibilities for future bulk hybrid energy transmission for railway transportation.
Leakage and Diffusion Characteristics of Underground Hydrogen Pipeline
Jun 2023
Publication
Soil corrosion and hydrogen embrittlement are the main factors of hydrogen pipeline failure. The gas escapes diffuses and accumulating in the soil and entering the atmosphere when leak occurs. The mechanism of gas diffusion in buried pipelines is very complicated. Mastering the evolution law of hydrogen leakage diffusion is conducive to quickly locating the leakage point and reducing the loss. The leakage model of the underground hydrogen pipeline is established in this paper. Effect of leakage hole soil type pipeline pressure pipeline diameter on hydrogen leakage diffusion were investigated. The results show that when the hydrogen pipeline leaks the hydrogen concentration increases with the increase of leakage time showing a symmetrical distribution trend. With the pipeline pressure increase hydrogen leakage speed is accelerated and longitudinal diffusion gradually becomes the dominant direction. With the leakage diameter increases hydrogen leakage per unit of time increases sharply. Hydrogen diffuses more easily in sandy soil and diffusion speed concentration and range are higher than that in clay soil. The research content provides a reference and basis for the detection and evaluation of buried hydrogen pipeline leakage.
A Bibliometric and Visualized Overview of Hydrogen Embrittlement from 1997 to 2022
Dec 2022
Publication
The mechanical properties of materials deteriorate when hydrogen embrittlement (HE) occurs seriously threatening the reliability and durability of the hydrogen system. Therefore it is important to summarize the status and development trends of research on HE. This study reviewed 6676 publications concerned with HE from 1997 to 2022 based on the Web of Science Core Collection. VOSviewer was used to conduct the bibliometric analysis and produce visualizations of the publications. The results showed that the number of publications on HE increased after 2007 especially between 2017 and 2019. Japan was the country with the highest numbers of productive authors and citations of publications and the total number of citations of Japanese publications was 24589. Kyushu University was the most influential university and the total number of citations of Kyushu University publications was 7999. Akiyama was the most prolific and influential author publishing 88 publications with a total of 2565 citations. The USA South Korea and some European countries are also leading in HE research; these countries have published more than 200 publications. It was also found that the HE publications generally covered five topics: “Hydrogen embrittlement in different materials” “Effect of hydrogen on mechanical properties of materials” “Effect of alloying elements or microstructure on hydrogen embrittlement” “Hydrogen transport” and “Characteristics and mechanisms of hydrogen related failures”. Research hotspots included “Fracture failure behavior and analysis” “Microstructure” “Hydrogen diffusion and transport” “Mechanical properties” “Hydrogen resistance” and so on. These covered the basic methods and purposes of HE research. Finally the distribution of the main subject categories of the publications was determined and these categories covered various topics and disciplines. This study establishes valuable reference information for the application and development of HE research and provides a convenient resource to help researchers and scholars understand the development trends and research directions in this field.
Research on Energy Management Method of Fuel Cell/Supercapacitor Hybrid Trams Based on Optimal Hydrogen Consumption
Jul 2023
Publication
In this paper based on the operating states and characteristics of fuel cell/supercapacitor hybrid trams an optimal hydrogen energy management method is proposed. This method divides the operating states into two parts: traction state and non-traction state. In the traction state the real-time loss function of the hybrid power system which is used to obtain the fuel cell optimal output power under the different demand powers and supercapacitor voltage is established. In the non-traction state the constant-power charging method which is obtained by solving the power-voltage charging model is used to ensure the supercapacitor voltage of the beginning-state and the end-state in an entire operation cycle are the same. The RT-LAB simulation platform is used to verify that the proposed method has the ability to control the hybrid real-time system. Using the comparative experiment between the proposed method and power-follow method the results show that the proposed method offers a significant improvement in both fuel cell output stability and hydrogen consumption in a full operation cycle.
Analysis of Hydrogen Gas Injection at Various Compositions in an Existing Natural Gas Pipeline
Jul 2021
Publication
The lack of hydrogen (H2) transportation infrastructure restricts the development of the H2 industry. Owing to the high investment of building specific facilities using existing natural gas (NG) pipelines to transport a blend of H2 and NG (H2NG) is a viable means of transportation and approach for large-scale long-time storage. However variation in the thermo-physical properties of an H2NG blend will impact the performance of pipeline appliances. To address the gaps in H2 transmission via an NG system in the context of energy consumption in the present paper a one-dimensional pipeline model is proposed to predict the blended flow in a real existing pipeline (Shan–Jing I China). The data of NG components were derived from real gas fields. Furthermore the influence of H2 fractions on pipeline energy coefficient and the layout of pressurization stations are comprehensively analyzed. In addition the case of intermediate gas injection is investigated and the effects of injection positions are studied. This study serves as a useful reference for the design of an H2NG pipeline system. The present study reveals that with the increasing in H2 fraction the distance between pressure stations increases. Furthermore when the arrangement of original pressure stations is maintained overpressure occur. Intermediate gas injection results in the inlet pressure of subsequent pressurization stations reducing. Using existing pipeline network to transport H2NG it is necessary to make appropriate adjustment.
A Comparison of Well-to-Wheels Energy Use and Emissions of Hydrogen Fuel Cell, Electric, LNG, and Diesel-Powered Logistics Vehicles in China
Jul 2023
Publication
Global energy and environmental issues are becoming increasingly serious and the promotion of clean energy and green transportation has become a common goal for all countries. In the logistics industry traditional fuels such as diesel and natural gas can no longer meet the requirements of energy and climate change. Hydrogen fuel cell logistics vehicles are expected to become the mainstream vehicles for future logistics because of their “zero carbon” advantages. The GREET model is computer simulation software developed by the Argonne National Laboratory in the USA. It is extensively utilized in research pertaining to the energy and environmental impact of vehicles. This research study examines four types of logistics vehicles: hydrogen fuel cell vehicles (FCVs) electric vehicles LNG-fueled vehicles and diesel-fueled vehicles. Diesel-fueled logistics vehicles are currently the most abundant type of vehicle in the logistics sector. LNG-fueled logistics vehicles are considered as a short-term alternative to diesel logistics vehicles while electric logistics vehicles are among the most popular types of new-energy vehicles currently. We analyze and compare their well-to-wheels (WTW) energy consumption and emissions with the help of GREET software and conduct lifecycle assessments (LCAs) of the four types of vehicles to analyze their energy and environmental benefits. When comparing the energy consumption of the four vehicle types electric logistics vehicles (EVs) have the lowest energy consumption with slightly lower energy consumption than FCVs. When comparing the nine airborne pollutant emissions of the four vehicle types the emissions of the FCVs are significantly lower than those of spark-ignition internal combustion engine logistics vehicles (SI ICEVs) compression-ignition direct-injection internal combustion engine logistics vehicles (CIDI ICEVs) and EVs. This study fills a research gap regarding the energy consumption and environmental impact of logistics vehicles in China.
China's Hydrogen Development Strategy in the Context of Double Carbon Targets
Dec 2022
Publication
As a clean low-carbon efficient and renewable energy source hydrogen has gradually become an important energy carrier to combat climate change and achieve sustainable development in the world. China is now facing the stress of realizing the carbon peak and carbon neutrality goals where hydrogen will play a significant role. Against this backdrop to develop China's hydrogen strategy under the carbon peak and carbon neutrality goals this paper explores the hydrogen resource endowment in China presents the concepts such as Hydrogen Ethics and the Hu's Hydrogen Line and discusses the status quo and existing advantages in hydrogen production storage transport and utilization in China. Six major obstacles and challenges that China's hydrogen energy industry is facing are pointed out i.e. cost problem inadequate hydrogen infrastructures low energy efficiency mismatching the development progress of renewable energy insufficient market demand shortcomings in technology and imperfect policy system. Finally five policy suggestions for the future development of China's hydrogen energy industry are proposed as follows: (1) make an action plan as a response to the national hydrogen development plan; (2) build an international and domestic double-cycle hydrogen economic system; (3) incorporate hydrogen into the establishment of a clean low-carbon safe and efficient energy system; (4) accelerate the technological innovation to form advanced hydrogen technologies; and (5) construct hydrogen-oriented industrial clusters/parks to expand the hydrogen utilization market. It is concluded that for meeting the carbon peak and carbon neutrality goals China should leverage the dual advantages of hydrogen as an energy carrier and an industrial raw material allowing the hydrogen industry to play a synergistic role in ensuring the country's energy security promoting the socio-economic transformation and upgrading and protecting the ecological environment thereby providing a technical option and support for China to achieve the ultimate goal of carbon neutrality.
Coordinated Planning and Operation of Inter Seasonal Heat Storage and P2G Devices Integrated to Urban Multi-energy System
Mar 2023
Publication
With the urbanization construction and the advancement of the carbon peaking and carbon neutrality goals urban energy systems are characterized by coupling multi-energy networks and a high proportion of renewable energy. Urban energy systems need to improve the quality of energy use as well as to achieve energy conservation and emission reduction. Inter-seasonal heat technology has satisfactory engineering application prospects in promoting renewable energy consumption and the energy supply of urban multi-energy systems. Considering inter-seasonal heat storage and electric hydrogen production a joint optimization method of planning and operation is proposed for the urban multi-energy flow system. First the operation framework of inter-seasonal heat storage and electric hydrogen production system is established which clarifies the energy flow of the urban multi-energy system. Secondly aiming at the goals of minimizing the equipment’s annual investment cost and the multi-energy system annual operation cost combined with the time series period division method a planning operation model has been established considering multi-objectives. Through case study it is shown that the proposed model can promote the renewable energy consumption and reduce the operation cost of the whole system.
Hydrogen Production System Using Alkaline Water Electrolysis Adapting to Fast Fluctuating Photovoltaic Power
Apr 2023
Publication
Using photovoltaic (PV) energy to produce hydrogen through water electrolysis is an environmentally friendly approach that results in no contamination making hydrogen a completely clean energy source. Alkaline water electrolysis (AWE) is an excellent method of hydrogen production due to its long service life low cost and high reliability. However the fast fluctuations of photovoltaic power cannot integrate well with alkaline water electrolyzers. As a solution to the issues caused by the fluctuating power a hydrogen production system comprising a photovoltaic array a battery and an alkaline electrolyzer along with an electrical control strategy and energy management strategy is proposed. The energy management strategy takes into account the predicted PV power for the upcoming hour and determines the power flow accordingly. By analyzing the characteristics of PV panels and alkaline water electrolyzers and imposing the proposed strategy this system offers an effective means of producing hydrogen while minimizing energy consumption and reducing damage to the electrolyzer. The proposed strategy has been validated under various scenarios through simulations. In addition the system’s robustness was demonstrated by its ability to perform well despite inaccuracies in the predicted PV power.
P2H Modeling and Operation in the Microgrid Under Coupled Electricity–Hydrogen Markets
Dec 2021
Publication
The uncertainty and volatility of wind power have led to large-scale wind curtailment during grid connections. The adoption of power-to-hydrogen (P2H) system in a microgrid (MG) can mitigate the renewable curtailment by hydrogen conversion and storage. This paper conducts unified modeling for different types of P2H systems and considers the multi-energy trading in a hydrogen-coupled power market. The proposed bi-level equilibrium model is beneficial to minimize the energy cost of microgrids. Firstly a microgrid operation model applied to different P2H systems including an alkaline electrolysis cell (AEC) a proton exchange membrane electrolysis cell (PEMEC) or a solid oxide electrolysis cell (SOEC) is proposed at the upper level. Secondly an electricity market–clearing model and a hydrogen market model are constructed at the lower level. Then the diagonalization algorithm is adopted to solve the multi-market equilibrium problem. Finally case studies based on an IEEE 14-bus system are conducted to validate the proposed model and the results show that the microgrid with a P2H system could gain more profits and help increase the renewable penetration.
Study on the Dynamic Optimal Control Strategy of an Electric-Hydrogen Hybrid Energy Storage System for a Direct Drive Wave Power Generation System
Jul 2023
Publication
A direct drive wave power generation system (DDWPGS) has the advantages of a simple structure and easy deployment and is the first choice to provide electricity for islands and operation platforms in the deep sea. However due to the off-grid the source and load cannot be matched so accommodation is an important issue. Hydrogen storage is the optimal choice for offshore wave energy accommodation. Therefore aiming at the source-load mismatch problem of the DDWPGS an electric-hydrogen hybrid energy storage system (HESS) for the DDWPGS is designed in this paper. Based on the characteristics of the devices in the electric-hydrogen HESS a new dynamic power allocation strategy and its control strategy are proposed. Firstly empirical mode decomposition (EMD) is utilized to allocate the power fluctuations that need to be stabilized. Secondly with the state of charge (SOC) of the battery and the operating characteristics of the alkaline electrolyzer being considered the power assignments of the battery and the electrolyzer are determined using the rule-based method. In addition model predictive control (MPC) with good tracking performance is used to adjust the output power of the battery and electrolyzer. Finally the supercapacitor (SC) is controlled to maintain the DC bus voltage while also balancing the system’s power. A simulation was established to verify the feasibility of the designed system. The results show that the electric-hydrogen HESS can stabilize the power fluctuations dynamically when the DDWPGS captures instantaneous power. Moreover its control strategy can not only reduce the start-stop times of the alkaline electrolyzer but also help the energy storage devices to maintain a good state and extend the service life.
Environmental Benefit and Investment Value of Hydrogen-Based Wind-Energy Storage System
Mar 2021
Publication
Alongside the rapid expansion of wind power installation in China wind curtailment is also mounting rapidly due to China’s energy endowment imbalance. The hydrogen-based wind-energy storage system becomes an alternative to solve the puzzle of wind power surplus. This article introduced China’s energy storage industry development and summarized the advantages of hydrogen-based wind-energy storage systems. From the perspective of resource conservation it estimated the environmental benefits of hydrogen-based wind-energy storages. This research also builds a valuation model based on the Real Options Theory to capture the distinctive flexible charging and discharging features of the hydrogen-based wind-energy storage systems. Based on the model simulation results including the investment value and operation decision of the hydrogen energy storage system with different electricity prices system parameters and different levels of subsidies are presented. The results show that the hydrogen storage system fed with the surplus wind power can annually save approximately 2.19–3.29 million tons of standard coal consumption. It will reduce 3.31–4.97 million tons of CO2 SO2 NOx and PM saving as much as 286.6–429.8 million yuan of environmental cost annually on average. The hydrogen-based wind-energy storage system’s value depends on the construction investment and operating costs and is also affected by the meanreverting nature and jumps or spikes in electricity prices. The market-oriented reform of China’s power sector is conducive to improve hydrogen-based wind-energy storage systems’ profitability. At present subsidies are still essential to reduce initial investment and attract enterprises to participate in hydrogen energy storage projects.
Technology Portfolio Assessment for Near-zero Emission Iron and Steel Industry in China
May 2023
Publication
China aims to peak CO2 emissions before 2030 and to achieve carbon neutrality before 2060; hence industrial sectors in China are keen to figure out appropriate pathways to support the national target of carbon neutrality. The objective of this study is to explore near-zero emission pathways for the steel industry of China through a detailed technology assessment. The innovative technology development has been simulated using the AIM-China/steel model developed by including material-based technologies and optimal cost analysis. Six scenarios have been given in terms of different levels of production output emission reduction and carbon tax. Near-zero emission and carbon tax scenarios have shown that China’s steel industry can achieve near-zero emission using electric furnaces and hydrogen-based direct reduction iron technologies with policy support. Based on these technologies minimised production costs have been calculated revealing that the steel produced by these technologies is cost-effective. Moreover the feedstock cost can play a key role in these technology portfolios especially the cost of scrap iron ore and hydrogen. In addition the feedstock supply can have strong regional effects and can subsequently impact the allocation of steelmaking in the future. Therefore China can achieve near-zero emissions in the steel industry and electric furnace and hydrogen-based direct reduction iron technologies are crucial to achieving them.
Current Development Status, Policy Support and Promotion Path of China’s Green Hydrogen Industries under the Target of Carbon Emission Peaking and Carbon Neutrality
Jun 2023
Publication
The green hydrogen industry highly efficient and safe is endowed with flexible production and low carbon emissions. It is conducive to building a low-carbon efficient and clean energy structure optimizing the energy industry system and promoting the strategic transformation of energy development and enhancing energy security. In order to achieve carbon emission peaking by 2030 and neutrality by 2060 (dual carbon goals) China is vigorously promoting the green hydrogen industry. Based on an analysis of the green hydrogen industry policies of the U.S. the EU and Japan this paper explores supporting policies issued by Chinese central and local authorities and examines the inherent advantages of China’s green hydrogen industry. After investigating and analyzing the basis for the development of the green hydrogen industry in China we conclude that China has enormous potential including abundant renewable energy resources as well as commercialization experience with renewable energy robust infrastructure and technological innovation capacity demand for large-scale applications of green hydrogen in traditional industries etc. Despite this China’s green hydrogen industry is still in its early stage and has encountered bottlenecks in its development including a lack of clarity on the strategic role and position of the green hydrogen industry low competitiveness of green hydrogen production heavy reliance on imports of PEMs perfluorosulfonic acid resins (PFSR) and other core components the development dilemma of the industry chain lack of installed capacity for green hydrogen production and complicated administrative permission etc. This article therefore proposes that an appropriate development road-map and integrated administration supervision systems including safety supervision will systematically promote the green hydrogen industry. Enhancing the core technology and equipment of green hydrogen and improving the green hydrogen industry chain will be an adequate way to reduce dependence on foreign technologies lowering the price of green hydrogen products through the scale effect and thus expanding the scope of application of green hydrogen. Financial support mechanisms such as providing tax breaks and project subsidies will encourage enterprises to carry out innovative technological research on and invest in the green hydrogen industry.
Two-Layer Optimization Planning Model for Integrated Energy Systems in Hydrogen Refueling Original Station
May 2023
Publication
With the aggravation of global environmental pollution problems and the need for energy restructuring hydrogen energy as a highly clean resource has gradually become a hot spot for research in countries around the world. Facing the requirement of distributed hydrogen in refueling the original station for hydrogen transportation and other usage this paper proposes a comprehensive energy system planning model for hydrogen refueling stations to obtain the necessary devices construction the devices’ capacity decisions and the optimal operation behaviors of each device. Comparing to traditional single hydrogen producing technics in the traditional planning model the proposed model in this paper integrates both water-electrolysis-based and methanol-based manufacturing technics. A two-level optimization model is designed for this comprehensive system. The result of the numerical study shows that the proposed model can achieve a better optimal solution for distributed hydrogen production. Also it considers the single producing situation when price of one primary resource is sufficient higher than the other.
A Techno-economic Analysis of Cross-regional Renewable Hydrogen Supply Routes in China
Jun 2023
Publication
The cross-regional renewable hydrogen supply is significant for China to resolve the uneven distribution of renewable energy and decarbonize the transportation sector. Yet the economic comparison of various hydrogen supply routes remains obscure. This paper conducts a techno-economic analysis on six hydrogen supply routes for hydrogen refueling stations including gas-hydrogen tube-trailer gas-hydrogen pipeline liquid-hydrogen truck natural gas pipeline MeOH truck and NH3 truck. Furthermore the impacts of three critical factors are examined including electrolyzer selection transportation distance and electricity price. The results indicate that with a transport distance of 2000 km the natural gas pipeline route offers the lowest cost while the gas-hydrogen tube-trailer route is not economically feasible. The gas-hydrogen pipeline route shows outstanding cost competitiveness between 200 and 2000 km while it is greatly influenced by the utilization rate. The liquid-hydrogen truck route demonstrates great potential with the electricity price decreasing. This study may provide guidance for the development of the cross-regional renewable hydrogen supply for hydrogen refueling stations in China.
Research on Energy Management of Hydrogen Fuel Cell Bus Based on Deep Reinforcement Learning Considering Velocity Control
Aug 2023
Publication
In the vehicle-to-everything scenario the fuel cell bus can accurately obtain the surrounding traffic information and quickly optimize the energy management problem while controlling its own safe and efficient driving. This paper proposes an energy management strategy (EMS) that considers speed control based on deep reinforcement learning (DRL) in complex traffic scenarios. Using SUMO simulation software (Version 1.15.0) a two-lane urban expressway is designed as a traffic scenario and a hydrogen fuel cell bus speed control and energy management system is designed through the soft actor–critic (SAC) algorithm to effectively reduce the equivalent hydrogen consumption and fuel cell output power fluctuation while ensuring the safe efficient and smooth driving of the vehicle. Compared with the SUMO–IDM car-following model the average speed of vehicles is kept the same and the average acceleration and acceleration change value decrease by 10.22% and 11.57% respectively. Compared with deep deterministic policy gradient (DDPG) the average speed is increased by 1.18% and the average acceleration and acceleration change value are decreased by 4.82% and 5.31% respectively. In terms of energy management the hydrogen consumption of SAC–OPT-based energy management strategy reaches 95.52% of that of the DP algorithm and the fluctuation range is reduced by 32.65%. Compared with SAC strategy the fluctuation amplitude is reduced by 15.29% which effectively improves the durability of fuel cells.
Comparative Techno-economic Analysis of Large-scale Renewable Energy Storage Technologies
Jun 2023
Publication
Energy storage is an effective way to address the instability of renewable energy generation modes such as wind and solar which are projected to play an important role in the sustainable and low-carbon society. Economics and carbon emissions are important indicators that should be thoroughly considered for evaluating the feasibility of energy storage technologies (ESTs). In this study we study two promising routes for large-scale renewable energy storage electrochemical energy storage (EES) and hydrogen energy storage (HES) via technical analysis of the ESTs. The levelized cost of storage (LCOS) carbon emissions and uncertainty assessments for EESs and HESs over the life cycle are conducted with full consideration of the critical links for these routes. In order to reduce the evaluation error we use the Monte Carlo method to derive a large number of data for estimating the economy and carbon emission level of ESTs based on the collected data. The results show that lithium ion (Li-ion) batteries show the lowest LCOS and carbon emissions at 0.314 US$ kWh-1 and 72.76 gCO2e kWh-1 compared with other batteries for EES. Different HES routes meaning different combinations of hydrogen production delivery and refueling methods show substantial differences in economics and the lowest LCOS and carbon emissions at 0.227 US$ kWh-1 and 61.63 gCO2e kWh-1 are achieved using HES routes that involve hydrogen production by alkaline electrolyzer (AE) delivery by hydrogen pipeline and corresponding refueling. The findings of this study suggest that HES and EES have comparable levels of economics and carbon emissions that should be both considered for large-scale renewable energy storage to achieve future decarbonization goals.
A Study of Hydrogen Embrittlement of SA-372 J Class High Pressure Hydrogen Storage Seamless Cylinder (≥100 MPA)
Nov 2022
Publication
The spinning process will lead to changes in the micro-structure and mechanical properties of the materials in different positions of the high-pressure hydrogen storage cylinder which will show different hydrogen embrittlement resistance in the high-pressure hydrogen environment. In order to fully study the safety of hydrogen storage in large-volume seamless steel cylinders this chapter associates the influence of the forming process with the deterioration of a high-pressure hydrogen cylinder (≥100 MPa). The anti-hydrogen embrittlement of SA-372 grade J steel at different locations of the formed cylinders was studied experimentally in three cylinders. The hydrogen embrittlement experiments were carried out according to method A of ISO 11114-4:2005. The relationship between tensile strength microstructure and hydrogen embrittlement is analyzed which provides comprehensive and reliable data for the safety of hydrogen storage and transmission.
Research on the Flexibility Margin of an Electric–Hydrogen Coupling Energy Block Based on Model Predictive Control
Apr 2022
Publication
Hydrogen energy plays an important role in the transformation of low-carbon energy and electric–hydrogen coupling will become a typical energy scenario. Aiming at the operation flexibility of a low-carbon electricity–hydrogen coupling system with high proportion of wind power and photovoltaic this work studies the flexibility margin of an electricity–hydrogen coupling energy block based on model predictive control. By analyzing the power exchange characteristics of heterogeneous energy the homogenization models of various heterogeneous energy sources are established. According to the analysis of power system flexibility margin three dimensions of flexibility margin evaluation indexes are defined from the dimension of system operation and an electricity–hydrogen coupling energy block scheduling model is established. The model predictive control algorithm is used to optimize the power balance operation of the electro–hydrogen coupling energy block and the flexibility margin of the energy block is quantitatively analyzed and calculated. Through the example analysis it is verified that the calculation method proposed in this article can not only realize the online power balance optimization of the electric–hydrogen coupling energy block but also effectively quantify the operation flexibility margin of the electric–hydrogen coupling energy block.
Investment Timing Analysis of Hydrogen-Refueling Stations and the Case of China: Independent or Co-Operative Investment?
Jun 2023
Publication
The investment in hydrogen-refueling stations (HRS) is key to the development of a hydrogen economy. This paper focuses on the decision-making for potential investors faced with the thought-provoking question of when the optimal timing to invest in HRS is. To fill the gap that exists due to the fact that few studies explain why HRS investment timing is critical we expound that earlier investment in HRS could induce the first mover advantages of the technology diffusion theory. Additionally differently from the previous research that only considered that HRS investment is just made by one individual firm we innovatively examine the HRS co-investment made by two different firms. Accordingly we compare these two optional investment modes and determine which is better considering either independent investment or co-operative investment. We then explore how the optimal HRS investment timing could be figured out under conditions of uncertainty with the real options approach. Given the Chinese HRS case under the condition of demand uncertainty the hydrogen demand required for triggering investment is viewed as the proxy for investment timing. Based on analytical and numerical results we conclude that one-firm independent investment is better than two-firm cooperative investment to develop HRS not only in terms of the earlier investment timing but also in terms of the attribute for dealing with the uncertainty. Finally we offer recommendations including stabilizing the hydrogen demand for decreasing uncertainty and accelerating firms’ innovation from both technological and strategic perspectives in order to ensure firms can make HRS investments on their own.
Heat Transfer Models for Refueling Safety of Hydrogen Vehicle
Sep 2021
Publication
Due to the simple structure and quick refueling process of the compressed hydrogen storage tank it is widely used in fuel cell vehicles at present. However temperature rise may lead to a safety problem during charging of a compressed hydrogen storage tank. To ensure the refueling safety the thermal effects need to be studied carefully during hydrogen refueling process. In this paper based on the mass and energy balance equations a general heat transfer model for refueling process of compressed hydrogen storage tank is established. According to the geometric model of the tank wall structure we have built three lumped parameter models: single-zone (hydrogen) dual-zone (hydrogen and tank wall) and triple-zone (hydrogen tank wall liner and shell) model. These three lumped parameter models are compared with U.S. Naval gas charging model and SAE MC method based refueling model. Under adiabatic and diathermic conditions four models are built in Matlab/Simulink software to simulate the hydrogen refueling process under corresponding conditions. These four models are: single-zone singletemperature (hydrogen) dual-zone single-temperature (hydrogen) dual-zone dual-temperature (hydrogen and tank wall temperatures) and triple-zone triple-temperature (hydrogen tank wall liner and tank wall shell temperatures). By comparing the analytical solution and numerical solution the temperature rise of the compressed hydrogen storage tank can be described. The analytical and numerical solutions on the heat transfer during hydrogen refueling process will provide theoretical guidance at actual refueling station so as to improve the refueling efficiency and to enhance the refueling safety.
Deep Decarbonization of the Indian Economy: 2050 Prospects for Wind, Solar, and Green Hydrogen
May 2022
Publication
The paper explores options for a 2050 carbon free energy future for India. Onshore wind and solar sources are projected as the dominant primary contributions to this objective. The analysis envisages an important role for so-called green hydrogen produced by electrolysis fueled by these carbon free energy sources. This hydrogen source can be used to accommodate for the intrinsic variability of wind and solar complementing opportunities for storage of power by batteries and pumped hydro. The green source of hydrogen can be used also to supplant current industrial uses of grey hydrogen produced in the Indian context largely from natural gas with important related emissions of CO2. The paper explores further options for use of green hydrogen to lower emissions from otherwise difficult to abate sectors of both industry and transport. The analysis is applied to identify the least cost options to meet India’s zero carbon future.
Research on Multi-Objective Energy Management of Renewable Energy Power Plant with Electrolytic Hydrogen Production
Mar 2024
Publication
This study focuses on a renewable energy power plant equipped with electrolytic hydrogen production system aiming to optimize energy management to smooth renewable energy generation fluctuations participate in peak shaving auxiliary services and increase the absorption space for renewable energy. A multi-objective energy management model and corresponding algorithms were developed incorporating considerations of cost pricing and the operational constraints of a renewable energy generating unit and electrolytic hydrogen production system. By introducing uncertain programming the uncertainty issues associated with renewable energy output were successfully addressed and an improved particle swarm optimization algorithm was employed for solving. A simulation system established on the Matlab platform verified the effectiveness of the model and algorithms demonstrating that this approach can effectively meet the demands of the electricity market while enhancing the utilization rate of renewable energies.
A Comprehensive Review of Electrochemical Hybrid Power Supply Systems and Intelligent Energy Managements for Unmanned Aerial Vehicles in Public Services
Jun 2022
Publication
The electric unmanned aerial vehicles (UAVs) are rapidly growing due to their abilities to perform some difficult or dangerous tasks as well as many public services including real-time monitoring wireless coverage search and rescue wildlife surveys and precision agriculture. However the electrochemical power supply system of UAV is a critical issue in terms of its energy/power densities and lifetime for service endurance. In this paper the current power supply systems used in UAVs are comprehensively reviewed and analyzed on the existing power configurations and the energy management systems. It is identified that a single type of electrochemical power source is not enough to support a UAV to achieve a long-haul flight; hence a hybrid power system architecture is necessary. To make use of the advantages of each type of power source to increase the endurance and achieve good performance of the UAVs the hybrid systems containing two or three types of power sources (fuel cell battery solar cell and supercapacitor) have to be developed. In this regard the selection of an appropriate hybrid power structure with the optimized energy management system is critical for the efficient operation of a UAV. It is found that the data-driven models with artificial intelligence (AI) are promising in intelligent energy management. This paper can provide insights and guidelines for future research and development into the design and fabrication of the advanced UAV power systems.
Investigation of Hydrogen Leaks from Double Ferrule Fittings
Sep 2021
Publication
The use of hydrogen is expected to increase rapidly in the future. Leakage of hydrogen pipework are the main forms of safety problems in hydrogen utilization. In this paper a numerical model of hydrogen leakage and diffusion in pipe joints was established. The Schlieren + high-speed camera is used in experiments to observe the leakage of hydrogen in the pipe joints. In addition the shape and size of the scratches in the tube were statistically analyzed. Finally the leakage characteristics of double ferrule joints with scratches are experimentally analyzed. For the two scratch sizes the critical pressure values for the vortex transition are 0.2 MPa and 0.03 MPa. Through our experimental process some practical experience and suggestions are given.
Cradle-grave Energy Consumption, Greenhouse Gas and Acidification Emissions in Current and Future Fuel Cell Vehicles: Study Based on Five Hydrogen Production Methods in China
Jun 2022
Publication
Hydrogen fuel cell vehicles (FCVs) are regarded as a promising solution to the problems of energy security and environmental pollution. However the technology is under development and the hydrogen consumption is uncertain. The quantitative evaluation of life cycle energy consumption pollution emissions of current and future FCVs in China involves complex processes and parameters. Therefore this study addresses Life Cycle Assessment (LCA) of FCV and focuses on the key parameters of FCV production and different hydrogen production methods which include steam methane reforming catalysis decomposition methanol steam reforming electrolysis–photovoltaic (PV) and electrolysis Chinese electricity grid mix (CN). Sensitivity analysis of bipolar plate glider mass power density fuel cell system efficiency and energy control strategy are performed whilst accounting for different assumption scenarios. The results show that all impact assessment indicators will decrease by 28.8– 44.3% under the 2030 positive scenario for the production of FCVs. For cradle-grave FCVs the use of hydrogen from electrolysis operated with photovoltaic power reduces global warming potential (GWP) by almost 76.4% relative to steam methane reforming. By contrast the use of hydrogen from electrolysis operated with the Chinese electricity grid mix results in an increase in GWP of almost 158.3%.
Operation Potential Evaluation of Multiple Hydrogen Production and Refueling Integrated Stations Under DC Interconnected Environment
Feb 2022
Publication
Hydrogen production and refueling integrated station can play an important role in the development of hydrogen transportation and fuel cell vehicles and actively promote the energy transformation. By using DC system for hydrogen production and refueling the conversion links can be reduced and the system efficiency can be effectively improved. In this paper a new scheme of DC interconnection for hydrogen production and refueling integrated station is proposed and the modular modeling and operation capability evaluation method are proposed including the characteristic analysis of integrated station the modular modeling and evaluation method for multiple integrated stations under DC interconnection. The DC interconnection system of five integrated stations is constructed and operation capability improvement of integrated stations after adopting the innovative DC interconnection scheme is analyzed. On this basis the system simulation model based on MATLAB/Simulink and physical test platform are built to verify the effectiveness of the theoretical analysis.
Improve Hydrogen Economy for Vehicular Fuel Cell System via Investigation and Control of Optimal Operating Oxygen Excess Ratio
Apr 2022
Publication
This study investigates and controls the optimal operating oxygen excess ratio (OER) for PEMFC which effectively prevents oxygen starvation and improves the hydrogen economy of proton exchange membrane fuel cells (PEMFC). Firstly the PEMFC output characteristic model and the five-order nonlinear air supply system model are established. Moreover an adaptive algebraic observer was developed to observe the partial pressure of gas in PEMFC and further reconstruct OER. Secondly to achieve the minimum hydrogen consumption under the required power the reference OER is determined by analyzing the PEMFC system output power with its minimum current. Finally the super-twisting algorithm is adopted to track reference OER. Simulation results show that the average absolute observation errors of oxygen nitrogen and cathode pressures under the Highway Fuel Economy Test are 1351.1 Pa (5.1%) 1724.2 Pa (0.9%) and 409.9 Pa (1.6%) respectively. The OER adjust average absolute error is 0.03. Compared with the commonly used fixed OER (e.g. OER of 1.5 and 2.3) the optimal OER strategy can reduce the hydrogen consumption of the PEMFC system by 5.2% and 1.8% respectively. Besides a DSP hardware in loop test is conducted to show the real-time performance of the proposed optimal method.
Experimental Study on the Cycle Variation Characteristics of Direct Injection Hydrogen Engine
Jun 2022
Publication
Hydrogen energy is an important technical route to achieve carbon peak and carbon neutrality. Direct injection hydrogen engine is one of the ways of hydrogen energy application. It has the advantages of high thermal efficiency and limit/reduce abnormal combustion phenomena. In order to explore the cycle characteristics of direct injection hydrogen engine based on a 2.0L direct injection hydrogen engine an experimental study on the cycle characteristics of direct injection hydrogen engine was carried out. The experimental results show that cycle variation increases from 0.67% to 1.02% with the increasing of engine speed. The cycle variation decreases from 1.52% to 0.64% with the increasing of engine load. As the equivalence ratio increases the cycle variation first decreases significantly from 2.52% to 0.35% and then stabilizes. The ignition advance angle has a better angle to minimize the cycle variation. An experimental study on the influence of the start of injection on the cycle variation was carried out. As the engine speed/engine load is 2000rpm/4bar the cycle variation increases from 0.72% to 2.42% with the start of injection changing from -280°CA to -180°CA; then rapidly decreases to 0.99% and then increases to 2.26% with the start of injection changing from -180°CA to -100°CA. The experimental results show that SOI could cause significant influence on cycle variation because of intake valve closing and shortening mixing time and both the process of intake valve closing and lagging the SOI could cause the cycle variation to increase. The SOI remarkably affects the cycle variation at low engine load/equivalence ratio and high engine speed. This study lays the foundation for the follow-up research of hydrogen engine performance matching of the cycle variation.
A Review of the MSCA ITN ECOSTORE—Novel Complex Metal Hydrides for Efficient and Compact Storage of Renewable Energy as Hydrogen and Electricity
Mar 2020
Publication
Hydrogen as an energy carrier is very versatile in energy storage applications. Developments in novel sustainable technologies towards a CO2-free society are needed and the exploration of all-solid-state batteries (ASSBs) as well as solid-state hydrogen storage applications based on metal hydrides can provide solutions for such technologies. However there are still many technical challenges for both hydrogen storage material and ASSBs related to designing low-cost materials with low-environmental impact. The current materials considered for all-solid-state batteries should have high conductivities for Na+ Mg2+ and Ca2+ while Al3+-based compounds are often marginalised due to the lack of suitable electrode and electrolyte materials. In hydrogen storage materials the sluggish kinetic behaviour of solid-state hydride materials is one of the key constraints that limit their practical uses. Therefore it is necessary to overcome the kinetic issues of hydride materials before discussing and considering them on the system level. This review summarizes the achievements of the Marie Skłodowska-Curie Actions (MSCA) innovative training network (ITN) ECOSTORE the aim of which was the investigation of different aspects of (complex) metal hydride materials. Advances in battery and hydrogen storage materials for the efficient and compact storage of renewable energy production are discussed.
Novel Ways for Hydrogen Production Based on Methane Steam and Dry Reforming Integrated with Carbon Capture
Sep 2022
Publication
The combination of methane steam reforming technology and CCS (Carbon Capture and Storage) technology has great potential to reduce carbon emissions in the process of hydrogen production. Different from the traditional idea of capturing CO2 (Carbon Dioxide) in the exhaust gas with high work consumption this study simultaneously focuses on CO2 separation from fuel gas and recycling. A new hydrogen production system is developed by methane steam reforming coupled with carbon capture. Separated and captured high-purity carbon dioxide could be recycled for methane dry reforming; on this basis a new methane-dry-reforming-driven hydrogen production system with a carbon dioxide reinjection unit is innovatively proposed. In this study the energy flow and irreversible loss in the two newly developed systems are analyzed in detail through energy and exergy balance analysis. The advantages are explored from the perspective of hydrogen production rate natural gas consumption and work consumption. In addition in consideration of the integrated performance an optimal design analysis was conducted. In terms of hydrogen production the new system based on dry reforming is better with an advantage of 2.41%; however it is worth noting that the comprehensive thermal performance of the new steam reforming system is better reaching 10.95%. This study provides new ideas for hydrogen production from a low carbon emission perspective and also offers a new direction for future distributed energy system integration.
Numerical Simulation on Pressure Dynamic Response Characteristics of Hydrogen Systems for Fuel Cell Vehicles
Mar 2022
Publication
A proton exchange membrane fuel cell (PEMFC) is known as one of the most promising energy sources for electric vehicles. A hydrogen system is required to provide hydrogen to the stack in time to meet the flow and pressure requirements according to the power requirements. In this study a 1-D model of a hydrogen system including the fuel cell stack was established. Two modes one with and one without a proportion integration differentiation (PID) control strategy were applied to analyze the pressure characteristics and performance of the PEMFC. The results showed that the established model could be well verified with experimental data. The anode pressure fluctuation with a PID control strategy was more stable which reduced the damage to the fuel cell stack caused by sudden changes of anode pressure. In addition the performance of the stack with the PID control mode was slightly improved. There was an inflection point for hydrogen utilization; the hydrogen utilization rate was higher under the mode without PID control when the current density was greater than 0.4 A/cm2 . What is more a hierarchical control strategy was proposed which made the pressure difference between the anode and cathode meet the stack working requirements and more importantly maintained the high hydrogen utilization of the hydrogen system.
Coupling Combustion Simulation and Primary Evaluation of an Asymmetric Motion Diesel Pilot Hydrogen Engine
Jul 2022
Publication
The thermal efficiency and combustion of conventional hydrogen engines cannot be optimized and improved by its symmetric reciprocating. This article introduces an asymmetric motion hydrogen engine (AHE) and investigates its combustion characteristics using diesel pilot ignition. A dynamic model is firstly proposed to describe the asymmetric motion of the AHE and then it is coupled into a multidimensional model for combustion simulation. The effect of asymmetric motion on the AHE combustion is also analyzed by comparing with a corresponding conventional symmetric hydrogen engine (SHE). The results show that the AHE moves slower in compression and faster in expansion than the SHE which brings about higher hydrogen-air mixing level for combustion. The asymmetric motion delays diesel injection to ignite the AHE and its combustion appears later than the SHE which leads to lower pressure and temperature for reducing NO formation. However the AHE faster expansion has a more severe post-combustion effect to reduce isovolumetric heat release level and decrease the energy efficiency.
Cost-Economic Analysis of Hydrogen for China’s Fuel Cell Transportation Field
Dec 2020
Publication
China has become a major market for hydrogen used in fuel cells in the transportation field. It is key to control the cost of hydrogen to open up the Chinese market. The development status and trends of China’s hydrogen fuel industry chain were researched. A hydrogen energy cost model was established in this paper from five aspects: raw material cost fixed cost of production hydrogen purification cost carbon trading cost and transportation cost. The economic analysis of hydrogen was applied to hydrogen transported in the form of high-pressure hydrogen gas or cryogenic liquid hydrogen and produced by natural gas coal and electrolysis of water. It was found that the cost of hydrogen from natural gas and coal is currently lower while it is greatly affected by the hydrogen purification cost and the carbon trading price. Considering the impact of future production technologies raw material costs and rising requirements for sustainable energy development on the hydrogen energy cost it is recommended to use renewable energy curtailment as a source of electricity and multi-stack system electrolyzers as large-scale electrolysis equipment in combination with cryogenic liquid hydrogen transportation or on-site hydrogen production. Furthermore participation in electricity market-oriented transactions cross-regional transactions and carbon trading can reduce the cost of hydrogen. These approaches represent the optimal method for obtaining inexpensive hydrogen.
Deep Reinforcement Learning Based Energy Management Strategy for Fuel Cell/Battery/Supercapacitor Powered Electric Vehicle
Sep 2022
Publication
Vehicles using a single fuel cell as a power source often have problems such as slow response and inability to recover braking energy. Therefore the current automobile market is mainly dominated by fuel cell hybrid vehicles. In this study the fuel cell hybrid commercial vehicle is taken as the research object and a fuel cell/ battery/supercapacitor energy topology is proposed and an energy management strategy based on a doubledelay deep deterministic policy gradient is designed for this topological structure. This strategy takes fuel cell hydrogen consumption fuel cell life loss and battery life loss as the optimization goals in which supercapacitors play the role of coordinating the power output of the fuel cell and the battery providing more optimization ranges for the optimization of fuel cells and batteries. Compared with the deep deterministic policy gradient strategy (DDPG) and the nonlinear programming algorithm strategy this strategy has reduced hydrogen consumption level fuel cell loss level and battery loss level which greatly improves the economy and service life of the power system. The proposed EMS is based on the TD3 algorithm in deep reinforcement learning and simultaneously optimizes a number of indicators which is beneficial to prolong the service life of the power system.
A Financial Model for Lithium-ion Storage in a Photovoltaic and Biogas Energy System
May 2019
Publication
Electrical energy storage (EES) such as lithium-ion (Li-ion) batteries can reduce curtailment of renewables maximizing renewable utilization by storing surplus electricity. Several techno-economic analyses have been performed on EES but few have investigated the financial performance. This paper presents a state-of-the-art financial model obtaining novel and significative financial and economics results when applied to Li-ion EES. This work is a significant step forward since traditional analysis on EES are based on oversimplified and unrealistic economic models. A discounted cash flow model for the Li-ion EES is introduced and applied to examine the financial performance of three EES operating scenarios. Real-life solar irradiance load and retail electricity price data from Kenya are used to develop a set of case studies. The EES is coupled with photovoltaics and an anaerobic digestion biogas power plant. The results show the impact of capital cost: the Li-ion project is unprofitable in Kenya with a capital cost of 1500 $/kWh but is profitable at 200 $/kWh. The study shows that the EES will generate a higher profit if it is cycled more frequently (hence a higher lifetime electricity output) although the lifetime is reduced due to degradation.
A Review of Technical Advances, Barriers, and Solutions in the Power to Hydrogen Roadmap
Oct 2020
Publication
Power to hydrogen (P2H) provides a promising solution to the geographic mismatch between sources of renewable energy and the market due to its technological maturity flexibility and the availability of technical and economic data from a range of active demonstration projects. In this review we aim to provide an overview of the status of P2H analyze its technical barriers and solutions and propose potential opportunities for future research and industrial demonstrations. We specifically focus on the transport of hydrogen via natural gas pipeline networks and end-user purification. Strong evidence shows that an addition of about 10% hydrogen into natural gas pipelines has negligible effects on the pipelines and utilization appliances and may therefore extend the asset value of the pipelines after natural gas is depleted. To obtain pure hydrogen from hydrogen-enriched natural gas (HENG) mixtures end-user separation is inevitable and can be achieved through membranes adsorption and other promising separation technologies. However novel materials with high selectivity and capacity will be the key to the development of industrial processes and an integrated membrane-adsorption process may be considered in order to produce high-purity hydrogen from HENG. It is also worth investigating the feasibility of electrochemical separation (hydrogen pumping) at a large scale and its energy analysis. Cryogenics may only be feasible when liquefied natural gas (LNG) is one of the major products. A range of other technological and operational barriers and opportunities such as water availability byproduct (oxygen) utilization and environmental impacts are also discussed. This review will advance readers’ understanding of P2H and foster the development of the hydrogen economy.
Performance Evaluation of a Hydrogen-fired Combined Cycle with Water Recovery
Mar 2023
Publication
Hydrogen can alleviate the increasing environmental pollution and has good development prospects in power generation due to its high calorific value and low environmental impact. The previously designed hydrogen-fired combined cycle ignored water recycling which led to an inefficient application of hydrogen and the wastage of water. This paper proposes the concept of a hydrogen-fired combined cycle with water recovery to reuse the condensed water as an industrial heat supply. It was applied to an F-class combined cycle power plant. The results demonstrate that the efficiency of hydrogen-fired combined cycles with and without water recovery increased by 1.92% and 1.35% respectively compared to that of the natural-gas-fired combined cycle under full working conditions. In addition an economic comparison of the three cycles was conducted. The levelized cost of energy of the hydrogen-fired combined cycle with water recovery will be 52.22% lower than that of the natural-gas-fired combined cycle in 2050. This comparative study suggested that water recovery supplementation could improve the gas turbine efficiency. The proposed hydrogen-fired combined cycle with water recovery would provide both environmental and economic benefits.
Impacts of Low-Carbon Targets and Hydrogen Production Alternatives on Energy Supply System Transition: An Infrastructure-Based Optimization Approach and a Case Study of China
Jan 2021
Publication
Low-carbon transition pathways oriented from different transition targets would result in a huge variation of energy system deployment and transition costs. Hydrogen is widely considered as an imperative energy carrier to reach carbon neutral targets. However hydrogen production either from non-fossil power or fossil fuels with carbon capture is closely linked with an energy supply system and has great impacts on its structure. Identifying an economically affordable transition pathway is attractive and energy infrastructure is critical due to massive investment and long life-span. In this paper a multi-regional multi-period and infrastructure-based model is proposed to quantify energy supply system transition costs with different low-carbon targets and hydrogen production alternatives and China is taken as a case study. Results show that fulfilling 2-degree and 1.5-degree temperature increase targets would result in 84% and 151% increases in system transition costs 114% and 246% increases in infrastructure investment and 211% and 339% increases in stranded investment compared to fulfilling stated policy targets. Producing hydrogen from coal would be economical when carbon capture and sequestration cost is lower than 437 yuan per tonne and reduce infrastructure investment and stranded coal investment by 16% and 35% respectively than producing hydrogen from renewable power.
The State-of-the-Art Progress on the Forms and Modes of Hydrogen and Ammonia Energy Utilization in Road Transportation
Sep 2022
Publication
The crisscross progress of transportation and energy carries the migrating track of human society development and the evolution of civilization among which the decarbonization strategy is a key issue. Traffic carbon emissions account for 16.2% of total energy carbon emissions while road traffic carbon emissions account for 11.8% of total energy carbon emissions. Therefore road traffic is a vital battlefield in attaining the goal of decarbonization. Employing clean energy as an alternative fuel is of great significance to the transformation of the energy consumption structure in road transportation. Hydrogen and ammonia are renewable energy with the characteristics of being widely distributed and clean. Both exist naturally in nature and the products of complete combustion are substances (water and nitrogen) that do not pollute the atmosphere. Because it can promote agricultural production ammonia has a long history in human society. Both have the potential to replace traditional fossil fuel energy. An overview of the advantages of hydrogen and ammonia as well as their development in different countries such as the United States the European Union Japan and other major development regions is presented in this paper. Related research topics of hydrogen and ammonia’s production storage and transferring technology have also been analyzed and collated to stimulate the energy production chain for road transportation. The current cost of green hydrogen is between $2.70–$8.80 globally which is expected to approach $2–$6 by 2030. Furthermore the technical development of hydrogen and ammonia as a fuel for engines and fuel cells in road transportation is compared in detail and the tests practical applications and commercial popularization of these technologies are summarized respectively. Opportunities and challenges coexist in the era of the renewable energy. Based on the characteristics and development track of hydrogen and ammonia the joint development of these two types of energy is meant to be imperative. The collaborative development mode of hydrogen and ammonia together with the obstacles to their development of them are both compared and discussed. Finally referring to the efforts and experiences of different countries in promoting hydrogen and ammonia in road transportation corresponding constructive suggestions have been put forward for reference. At the end of the paper a framework diagram of hydrogen and ammonia industry chains is provided and the mutual promotion development relationship of the two energy sources is systematically summarized.
From Renewable Energy to Sustainable Protein Sources: Advancement, Challenges, and Future Roadmaps
Jan 2022
Publication
The concerns over food security and protein scarcity driven by population increase and higher standards of living have pushed scientists toward finding new protein sources. A considerable proportion of resources and agricultural lands are currently dedicated to proteinaceous feed production to raise livestock and poultry for human consumption. The 1st generation of microbial protein (MP) came into the market as land-independent proteinaceous feed for livestock and aquaculture. However MP may be a less sustainable alternative to conventional feeds such as soybean meal and fishmeal because this technology currently requires natural gas and synthetic chemicals. These challenges have directed researchers toward the production of 2nd generation MP by integrating renewable energies anaerobic digestion nutrient recovery biogas cleaning and upgrading carbon-capture technologies and fermentation. The fermentation of methane-oxidizing bacteria (MOB) and hydrogen-oxidizing bacteria (HOB) i.e. two protein rich microorganisms has shown a great potential on the one hand to upcycle effluents from anaerobic digestion into protein rich biomass and on the other hand to be coupled to renewable energy systems under the concept of Power-to-X. This work compares various production routes for 2nd generation MP by reviewing the latest studies conducted in this context and introducing the state-of-the-art technologies hoping that the findings can accelerate and facilitate upscaling of MP production. The results show that 2nd generation MP depends on the expansion of renewable energies. In countries with high penetration of renewable electricity such as Nordic countries off-peak surplus electricity can be used within MP-industry by supplying electrolytic H2 which is the driving factor for both MOB and HOB-based MP production. However nutrient recovery technologies are the heart of the 2nd generation MP industry as they determine the process costs and quality of the final product. Although huge attempts have been made to date in this context some bottlenecks such as immature nutrient recovery technologies less efficient fermenters with insufficient gas-to-liquid transfer and costly electrolytic hydrogen production and storage have hindered the scale up of MP production. Furthermore further research into techno-economic feasibility and life cycle assessment (LCA) of coupled technologies is still needed to identify key points for improvement and thereby secure a sustainable production system.
Super Short Term Combined Power Prediction for Wind Power Hydrogen Production
Sep 2022
Publication
A combined ultra-short-term wind power prediction strategy with high robustness based on least squares support vector machine (LSSVM) has been proposed in order to solve the wind abandonment caused by wind power randomness and realize efficient hydrogen production under wide power fluctuation. Firstly the original wind power data is decomposed into sub-modes with different bandwidth by variational modal decomposition (VMD) which reduces the influence of random noise and mode mixing significantly. Then dragonfly algorithm (DA) is introduced to optimize LSSVM kernel function and the combined ultra-short-term wind power prediction strategy which meets the time resolution and accuracy requirements of electrolytic cell control has been established finally. This model is validated by a wind power hydrogen production demonstration project output in the middle east of China. The superior prediction accuracy for high volatility wind power data is verified and the algorithm provides theoretical basis to improve the control of wind power hydrogen production system
Powertrain Design and Energy Management Strategy Optimization for a Fuel Cell Electric Intercity Coach in an Extremely Cold Mountain Area
Sep 2022
Publication
Facing the challenge that the single-motor electric drive powertrain cannot meet the continuous uphill requirements in the cold mountainous area of the 2022 Beijing Winter Olympics the manuscript adopted a dual-motor coupling technology. Then according to the operating characteristics and performance indicators of the fuel cell (FC)–traction battery hybrid power system the structure design and parameter matching of the vehicle power system architecture were carried out to improve the vehicle’s dynamic performance. Furthermore considering the extremely cold conditions in the Winter Olympics competition area and the poor low-temperature tolerance of core components of fuel cell electric vehicles (FCEV) under extremely cold conditions such as the reduced capacity and service life of traction batteries caused by the rapid deterioration of charging and discharging characteristics the manuscript proposed a fuzzy logic control-based energy management strategy (EMS) optimization method for the proton exchange membrane fuel cell (PEMFC) to reduce the power fluctuation hydrogen consumption and battery charging/discharging times and at the same time to ensure the hybrid power system meets the varying demand under different conditions. In addition the performance of the proposed approach was investigated and validated in an intercity coach in real-world driving conditions. The experimental results show that the proposed powertrain with an optimal control strategy successfully alleviated the fluctuation of vehicle power demand reduced the battery charging/discharging times of traction battery and improved the energy efficiency by 20.7%. The research results of this manuscript are of great significance for the future promotion and application of fuel cell electric coaches in all climate environments especially in an extremely cold mountain area.
Graphitic Carbon Nitride Heterojunction Photocatalysts for Solar Hydrogen Production
Sep 2021
Publication
Photocatalytic hydrogen production is considered as an ideal approach to solve global energy crisis and environmental pollution. Graphitic carbon nitride (g-C3N4) has received extensive consideration due to its facile synthesis stable physicochemical properties and easy functionalization. However the pristine g-C3N4 usually shows unsatisfactory photocatalytic activity due to the limited separation efficiency of photogenerated charge carriers. Generally introducing semiconductors or co-catalysts to construct g–C3N4–based heterojunction photocatalysts is recognized as an effective method to solve this bottleneck. In this review the advantages and characteristics of various types of g–C3N4–based heterojunction are analyzed. Subsequently the recent progress of highly efficient g–C3N4–based heterojunction photocatalysts in the field of photocatalytic water splitting is emphatically introduced. Finally a vision of future perspectives and challenges of g–C3N4–based heterojunction photocatalysts in hydrogen production are presented. Predictably this timely review will provide valuable reference for the design of efficient heterojunctions towards photocatalytic water splitting and other photoredox reactions.
Numerical Simulation on Heating Effects during Hydrogen Absorption in Metal Hydride Systems for Hydrogen Storage
Apr 2022
Publication
A 2-D numerical simulation model was established based on a small-sized metal hydride storage tank and the model was validated by the existing experiments. An external cooling bath was equipped to simulate the heating effects of hydrogen absorption reactions. Furthermore both the type and the flow rate of the cooling fluids in the cooling bath were altered so that changes in temperature and hydrogen storage capacity in the hydrogen storage model could be analyzed. It is demonstrated that the reaction rate in the center of the hydrogen storage tank gradually becomes lower than that at the wall surface. When the flow rate of the fluid is small significant differences can be found in the cooling liquid temperature at the inlet and the outlet cooling bath. In areas adjacent to its inlet the reaction rate is higher than that at the outlet and a better cooling effect is produced by water. As the flow rate increases the total time consumed by hydrogen adsorption reaction is gradually reduced to a constant value. At the same flow rate the wall surface of the tank shows a reaction rate insignificantly different from that in its center provided that cooling water or oil coolant is replaced with air.
Numerical Investigation on NOx Emission of a Hydrogen-Fuelled Dual-Cylinder Free-Piston Engine
Jan 2023
Publication
The free-piston engine is a type of none-crank engine that could be operated under variable compression ratio and this provides it flexible fuel applicability and low engine emission potential. In this work several 1-D engine models including conventional gasoline engines free-piston gasoline engines and free-piston hydrogen engines have been established. Both engine performance and emission performance under engine speeds between 5–11 Hz and with different equivalent ratios have been simulated and compared. Results indicated that the free-piston engine has remarkable potential for NOx reduction and the largest reduction is 57.37% at 6 Hz compared with a conventional gasoline engine. However the figure of NOx from the hydrogen free-piston engine is slightly higher than that of the gasoline free-piston engine and the difference increases with the increase of engine speed. In addition several factors and their relationships related to hydrogen combustion in the free-piston engine have been investigated and results show that the equivalent ratio ϕ = 0.88 is a vital point that affects NOx production and the ignition advance timing could also affect combustion duration the highest in-cylinder temperature and NOx production to a large extent.
Cross-regional Electricity and Hydrogen Deployment Research Based on Coordinated Optimization: Towards Carbon Neutrality in China
Sep 2022
Publication
In order to achieve carbon neutrality in a few decades the clean energy proportion in power mix of China will significantly rise to over 90%. A consensus has been reached recently that it will be of great significance to promote hydrogen energy that is produced by variable renewable energy power generation as a mainstay energy form in view of its potential value on achieving carbon neutrality. This is because hydrogen energy is capable of complementing the power system and realizing further electrification especially in the section that cannot be easily replaced by electric energy. Power system related planning model is commonly used for mid-term and long-term planning implemented through power installation and interconnection capacity expansion optimization. In consideration of the high importance of hydrogen and its close relationship with electricity an inclusive perspective which contains both kinds of the foresaid energy is required to deal with planning problems. In this study a joint model is established by coupling hydrogen energy model in the chronological operation power planning model to realize coordinated optimization on energy production transportation and storage. By taking the carbon neutrality scenario of China as an example the author applies this joint model to deploy a scheme research on power generation and hydrogen production inter-regional energy transportation capacity and hydrogen storage among various regions. Next by taking the technology progress and cost decrease prediction uncertainty into account the main technical– economic parameters are employed as variables to carry out sensitivity analysis research with a hope that the quantitative calculation and results discussion could provide suggestion and reference to energy-related companies policy-makers and institute researchers in formulating strategies on related energy development.
No more items...