Publications

There has recently been a concerted effort to commence a transition to fuel cell vehicles (FCVs) in Europe. A coalition of companies released an influential McKinsey-coordinated report in 2010 which concluded that FCVs are ready for commercial deployment. Public–private H2Mobility programmes have subsequently been established across Europe to develop business cases for the introduction of FCVs. In this paper we examine the conclusions of these studies from an energy systems perspective using the UK as a case study. Other UK energy system studies have identified only a minor role for FCVs after 2030 but we reconcile these views by showing that the differences are primarily driven by different data assumptions rather than methodological differences. Some energy system models do not start a transition to FCVs until around 2040 as they do not account for the time normally taken for the diffusion of new powertrains. We show that applying dynamic growth constraints to the UK MARKAL energy system model more realistically represents insights from innovation theory. We conclude that the optimum deployment of FCVs from an energy systems perspective is broadly in line with the roadmap developed by UK H2Mobility and that a transition needs to commence soon if FCVs are to become widespread by 2050.

This work is driven by the need to understand the hazards resulting from the rapid ignited release of hydrogen from onboard storage tanks through a thermally activated pressure relief device (TPRD) inside a garage-like enclosure with low natural ventilation i.e. the consequences of a jet fire which has been immediately ignited. The resultant overpressure is of particular interest. Previous work [1] focused on an unignited release in a garage with minimum ventilation. This initial work demonstrated that high flow rates of unignited hydrogen through a thermally activated pressure relief device (TPRD) in ventilated enclosures with low air change per hour can generate overpressures above the limit of 10- 15 kPa which a typical civil structure like a garage could withstand. This is due to the pressure peaking phenomenon. Both numerical and phenomenological models were developed for an unignited release and this has been recently validated experimentally [2]. However it could be expected that the majority of unexpected releases through a TPRD may be ignited; leading to even greater overpressures and to date whilst there has been some work on fires in enclosures the pressure peaking phenomenon for an ignited release has yet to be studied or compared with that for an equivalent unignited release. A numerical model for ignited releases in enclosures has been developed and computational fluid dynamics has then been used to examine the pressure dynamics of an ignited hydrogen release in a real scale garage. The scenario considered involves a high mass flow rate release from an onboard hydrogen storage tank at 700 bar through a 3.34 mm diameter orifice representing the TPRD in a small garage with a single vent equivalent in area to small window. It is shown that whilst this vent size garage volume and TPRD configuration may be considered “safe” from overpressures in the event of an unignited release the overpressure resulting from an ignited release is two orders of magnitude greater and would destroy the structure. Whilst further investigation is needed the results clearly indicate the presence of a highly dangerous situation which should be accounted for in regulations codes and standards. The hazard relates to the volume of hydrogen released in a given timeframe thus the application of this work extends beyond TPRDs and is relevant where there is a rapid ignited release of hydrogen in an enclosure with limited ventilation.

"The current practise of focusing the periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical - with regard to the damage of the specimen as well as in terms of their significance. This is justified by micro damages caused to the specimen by the test itself and by a lack of informative values. Thus BAM Federal Institute of Materials Research and Testing (Germany) uses a new approach of validation of composite for the determination of re-test periods. It enables the description of the state of a population of composite cylinders based on destructive tests parallel to operation.<br/>An essential aspect of this approach is the prediction of residual safe service life. In cases where it cannot be estimated by means of hydraulic load cycle tests as a replacement the creep or burst test remains. As a combination of these two test procedures BAM suggests the ""slow burst test SBT"". On this a variety of about 150 burst test results on three design types of cylinders with plastic liners are presented. For this purpose both the parameters of the test protocol as well as the nature and intensity of the pre-damage artificially aged test samples are analysed statistically. This leads first to an evaluation of the different types of artificial ageing but also to the clear recommendation that conventional burst tests be substituted totally if indented for assessment of composite pressure receptacles."

This paper presents a case study concerning a plant for hydrogen production and storage having a daily capacity of 100kg. The plant is located in Cluj-Napoca Romania. It produces hydrogen by means of water electrolysis while the energy is provided using solar energy. We performed the calculations for four different technical solutions used for the hydrogen production and storage plant and also we considered three scenarios regarding the sub-systems of the hydrogen production and storage plant efficiency. The conclusion of this study is that one can maximize the conversion of solar radiation into chemical energy in the form of hydrogen by hybridizing the solar hydrogen production system namely using both electrical energy as well as thermal energy in the form of steam.

This paper presents results of an experimental investigation on detonation wave propagation in semi-confined geometries. Large scale experiments were performed in layers up to 0.6 m filled with uniform and non-uniform hydrogen–air mixtures in a rectangular channel (width 3 m; length 9 m) which is open from below. A semi confined driver section is used to accelerate hydrogen flames from weak ignition to detonation. The detonation propagation was observed in a 7 m long unobstructed part of the channel. Pressure measurements ionization probes soot-records and high speed imaging were used to observe the detonation propagation. Critical conditions for detonation propagation in different layer thicknesses are presented for uniform H2/air-mixtures as well as experiments with uniform H2/O2 mixtures in a down scaled transparent channel. Finally detail investigations on the detonation wave propagation in H2/air-mixtures with concentration gradients are shown.

Jet fires develop on release of hydrogen from pressurized storage depending on orifice pressures and volumes. Risks arise from flame contact dispersion of hot gases and heat radiation. The latter varies strongly in time at short scales down to milliseconds caused by turbulent air entrainment and fluctuations. These jets emit bands of OH in the UV and water in the NIR and IR spectral range. These spectra enable the temperature measurement and the estimation of the air number of the measuring spot which can be used to estimate the total radiation at least from the bright combustion zones. Compared to video and IR camera frames the radiation enables to estimate species and temperatures distributions and total emissions. Impurities generate continuum radiation and the emission of CO2 in the IR indicates air entrainment which can be compared to CHEMKIN II calculation of the reaction with air.

The current energy system is subject to a fundamental transformation: A system that is oriented towards a constant energy supply by means of fossil fuels is now expected to integrate increasing amounts of renewable energy to achieve overall a more sustainable energy supply. The challenges arising from this paradigm shift are currently most obvious in the area of electric power supply. However it affects all areas of the energy system albeit with different results. Within the energy system various independent grids fulfill the function of transporting and spatially distributing energy or energy carriers and the demand-oriented supply ensures that energy demands are met at all times. However renewable energy sources generally supply their energy independently from any specific energy demand. Their contribution to the overall energy system is expected to increase significantly.<br/>Energy storage technologies are one option for temporal matching of energy supply and demand. Energy storage systems have the ability to take up a certain amount of energy store it in a storage medium for a suitable period of time and release it in a controlled manner after a certain time delay. Energy storage systems can also be constructed as process chains by combining unit operations each of which cover different aspects of these functions. Large-scale mechanical storage of electric power is currently almost exclusively achieved by pumped-storage hydroelectric power stations.<br/>These systems may be supplemented in the future by compressed-air energy storage and possibly air separation plants. In the area of electrochemical storage various technologies are currently in various stages of research development and demonstration of their suitability for large-scale electrical energy storage. Thermal energy storage technologies are based on the storage of sensible heat exploitation of phase transitions adsorption/desorption processes and chemical reactions. The latter offer the possibility of permanent and loss-free storage of heat. The storage of energy in chemical bonds involves compounds that can act as energy carriers or as chemical feedstocks. Thus they are in direct economic competition with established (fossil fuel) supply routes. The key technology here – now and for the foreseeable future – is the electrolysis of water to produce hydrogen and oxygen.<br/>Hydrogen can be transformed by various processes into other energy carriers which can be exploited in different sectors of the energy system and/or as raw materials for energy-intensive industrial processes. Some functions of energy storage systems can be taken over by industrial processes. Within the overall energy system chemical energy storage technologies open up opportunities to link and interweave the various energy streams and sectors. Chemical energy storage not only offers means for greater integration of renewable energy outside the electric power sector it also creates new opportunities for increased flexibility novel synergies and additional optimization.<br/>Several examples of specific energy utilization are discussed and evaluated with respect to energy storage applications. The article describes various technologies for energy storage and their potential applications in the context of Germany’s Energiewende i.e. the transition towards a more sustainable energy system. Therefore the existing legal framework defines some of the discussions and findings within the article specifically the compensation for renewable electricity providers defined by the German Renewable Energy Sources Act which is under constant reformation. While the article is written from a German perspective the authors hope this article will be of general interest for anyone working in the areas of energy systems or energy technology.

Hydrogen may play a crucial part in delivering a net zero emissions future. Currently hydrogen production storage transport and utilisation are being explored to scope opportunities and to reduce barriers to market activation. One such barrier could be negative public response to hydrogen technologies. Previous research around socio-technical risks finds that public acceptance issues are particularly challenging for emerging remote technical sensitive uncertain or unfamiliar technologies - such as hydrogen. Thus while the hydrogen value chain could offer a range of potential environmental economic and social benefits each will have perceived risks that could challenge the introduction and subsequent roll-out of hydrogen. These potential issues must be identified and managed so that the hydrogen sector can develop adapt or respond appropriately. Geological storage of hydrogen could present challenges in terms of perceived safety. Valuable lessons can be learned from international research and practice of CO2 and natural gas storage in geological formations (for carbon capture and storage CCS and for power respectively). Here we explore these learnings. We consider the similarities and differences between these technologies and how these may affect perceived risks. We also reflect on lessons for effective communication and community engagement. We draw on this to present potential risks to the perceived safety of - and public acceptability of – the geological storage of hydrogen. One of the key lessons learned from CCS and natural gas storage is that progress is most effective when risk communication and public acceptability is considered from the early stages of technology development.

When hydrogen flows through a small finite length constant exit area nozzle the viscous effects create a fluid throat which acts as a converging-diverging nozzle and lead to Mach number greater than one at the exit if the jet is under-expanded. This phenomenon influences the mass flow rate and the dispersion cloud size. In this study the boundary layer effect on the unsteady hydrogen sonic jet flow through a 1 mm diameter pipe from a high pressure reservoir (up to 70 MPa) is studied using computational fluid dynamics with a large eddy simulation turbulence model. This viscous flow simulation is compared with a non-viscous simulation to demonstrate that the velocity is supersonic at the exit of a small exit nozzle and that the mass flow is reduced.

Community support and acceptance is part of the licence to operate for any industry. The hydrogen industry is no different and we will need to have strong support from the broad community to establish a viable hydrogen economy in Australia.<br/>As Woodside progresses our plans for bulk hydrogen export and associated domestic opportunities stakeholder engagement throughout will be critical to success. This talk will share Woodside’s approach to community engagement and local opportunities and how we plan to draw on more than 30 years’ experience operating liquefied natural gas plants in Western Australia’s Pilbara region.<br/>At this early stage of our hydrogen work we are beginning with the end in mind: engaging the customer. We’ve worked with local Australian businesses to help raise public awareness and interest in hydrogen by producing prototype consumer products. We will share experiences from this work that underscore the value of early engagement with all stakeholders: government regulators industrial and community neighbours and end consumers to enable the hydrogen economy vision for Australia. This paper will present information on community engagement and acceptance of hydrogen in Australia.<br/>This information has come from Woodside Energy Ltd by engaging with small businesses government regulators and the community at large. As we establish community acceptance for hydrogen as an energy carrier in Australia Woodside has been working in parallel to have standards and regulations established for hydrogen in Australia. Through our work with Hydrogen Mobility Australia we are advocating the adoption of ISO standards unless there is a specific geographic or health safety and environment reason not to.