Publications

The Swiss government has signed the Paris Climate Agreement and various measures need to be implemented in order to reach the target of a 50% reduction in CO₂ emissions in Switzerland by 2030 compared with the value for 1990. Considering the fact that the production of cement in Switzerland accounts around 2.5 million ton for CO₂ emissions of which corresponds to roughly 7% of the country's total CO₂ emissions the following article examines how this amount could be put to meaningful use in order to create a new value-added chain through CO₂ methanation and thus reduce the consumption and import of fossil fuels in Switzerland. With power-to-gas technology this CO₂  along with regenerative hydrogen from photovoltaics can be converted into methane which can then be fed into the existing natural-gas grid. This economic case study shows a cost prediction for conversion of all the CO₂ from the cement industry into methane by using the technologies available today in order to replacing fossil methane imports.

Proton exchange membrane fuel cells (PEMFCs) are promising clean energy conversion devices in residential transportation and portable applications. Currently a high-pressure tank is the state-of-the-art mode of hydrogen storage; however the energy cost safety and portability (or volumetric hydrogen storage capacity) presents a major barrier to the widespread dissemination of PEMFCs. Here we show an ‘all-polymer type’ rechargeable PEMFC (RCFC) that contains a hydrogen-storable polymer (HSP) which is a solid-state organic hydride as the hydrogen storage media. Use of a gas impermeable SPP-QP (a polyphenylenebased PEM) enhances the operable time reaching up to ca. 10.2 s mg_HSP ⁻¹ which is more than a factor of two longer than that (3.90 s mg_HSP ⁻¹) for a Nafion NRE-212 membrane cell. The RCFCs are cycleable at least up to 50 cycles. The features of this RCFC system including safety ease of handling and light weight suggest applications in mobile light-weight hydrogen-based energy devices.

Based on data collection carried out between October and December 2020 and the testing of emerging findings with the Council’s regional communities during a series of digital workshops held during February 2021 the report has shown

• Energy leaders’ perceptions of areas of risk opportunity and priorities for action have radically changed over the last 12 months. While economic turbulence stemming from the ongoing reverberations of COVID-19 is the biggest area of uncertainty with uncertainty around economic trends increasing by a third over the previous year there is also a growing focus on the social agenda associated with a faster paced energy transition.

 

• There is an increased awareness of the societal and human impact of both recovery and the wider energy transition. The issue of energy affordability has rapidly risen up the industry’s priority list with its impact and uncertainty perceived 20% larger than a year ago. Energy affordability affects society across all geographies ranging from city dwellers in developed countries to the rural poor in developing ones.

 

• The emergence of a new generation of digital energy services and energy entrepreneurs. Increasingly agile disruptive technologies have taken advantage of the social upheaval to gain market share at the expense of supply-centric energy solutions. There is a growing focus on customer-centric demand-driven solutions and fast changing patterns of global and local demand.

Recent advances on synthesis characterization and hydrogen absorption properties of ultrasmall metal nanoparticles (defined here as objects with average size ≤3 nm) are briefly reviewed in the first part of this work. The experimental challenges encountered in performing accurate measurements of hydrogen absorption in Mg- and noble metal-based ultrasmall nanoparticles are addressed. The second part of this work reports original results obtained for ultrasmall bulk-immiscible Pd–Rh nanoparticles. Carbon-supported Pd–Rh nanoalloys in the whole binary chemical composition range have been successfully prepared by liquid impregnation method followed by reduction at 300°C. EXAFS investigations suggested that the local structure of these nanoalloys is partially segregated into Rh-rich core and Pd-rich surface coexisting within the same nanoparticles. Downsizing to ultrasmall dimensions completely suppresses the hydride formation in Pd-rich nanoalloys at ambient conditions contrary to bulk and larger nanosized (5–6 nm) counterparts. The ultrasmall Pd90Rh10 nanoalloy can absorb hydrogen-forming solid solutions under these conditions as suggested by in situ X-ray diffraction (XRD). Apart from this composition common laboratory techniques such as in situ XRD DSC and PCI failed to clarify the hydrogen interaction mechanism: either adsorption on developed surfaces or both adsorption and absorption with formation of solid solutions. Concluding insights were brought by in situ EXAFS experiments at synchrotron: ultrasmall Pd₇₅Rh₂₅ and Pd₅₀Rh₅₀ nanoalloys absorb hydrogen-forming solid solutions at ambient conditions. Moreover the hydrogen solubility in these solid solutions is higher with increasing Pd content and this trend can be understood in terms of hydrogen preferential occupation in the Pd-rich regions as suggested by in situ EXAFS. The Rh-rich nanoalloys (Pd₂₅Rh₇₅ and Pd₁₀Rh₉₀) only adsorb hydrogen on the developed surface of ultrasmall nanoparticles. In summary in situ characterization techniques carried out at large-scale facilities are unique and powerful tools for in-depth investigation of hydrogen interaction with ultrasmall nanoparticles at local level.

Hydrogen can serve as a carrier to store renewable energy in large scale. However hydrogen storage still remains a challenge in the current stage. It is difficult to meet the technical requirements applying the conventional storage of compressed gaseous hydrogen in high-pressure tanks or the solid-state storage of hydrogen in suitable materials. In the present work a gaseous and solid-state (G-S) hybrid hydrogen storage system with a low working pressure below 5 MPa for a 10 kW hydrogen energy storage experiment platform is developed and validated. A Ti−Mn type hydrogen storage alloy with an effective hydrogen capacity of 1.7 wt% was prepared for the G-S hybrid hydrogen storage system. The G-S hybrid hydrogen storage tank has a high volumetric hydrogen storage density of 40.07 kg H2 m−3 and stores hydrogen under pressure below 5 MPa. It can readily release enough hydrogen at a temperature as low as −15 °C when the FC system is not fully activated and hot water is not available. The energy storage efficiency of this G-S hybrid hydrogen storage system is calculated to be 86.4%−95.9% when it is combined with a FC system. This work provides a method on how to design a G-S hydrogen storage system based on practical demands and demonstrates that the G-S hybrid hydrogen storage is a promising method for stationary hydrogen storage application.

The environmental impact of the road transport sector together with urban freight transport growth has a notable repercussions in global warming health and economy. The need to reduce emissions caused by fossil fuel dependence and to foster the use of renewable energy sources has driven the development of zero-emissions powertrains. These clean transportation technologies are not only necessary to move people but to transport the increasing demand for goods and services that is currently taking place in the larger cities. Full electric battery-powered vans seem to be the best-placed solution to the problem. However despite the progress in driving range and recharge options those and other market barriers remain unsolved and the current market share of battery electric vehicles (BEVs) is not significant. Based on the development of hydrogen fuel cell stacks this work explains an emerging powertrain architecture concept for N1 class type vans that combines a battery-electric configuration with a fuel cell stack powered by hydrogen that works as a range extender (FC-EREV). A literature review is conducted with the aim to shed light on the possibilities of this hybrid light-duty commercial van for metropolitan delivery tasks providing insights into the key factors and issues for sizing the powertrain components and fuel management strategies to meet metropolitan freight fleet needs.

Korea Atomic Energy Research Institute (KAERI) established a multi-dimensional hydrogen analysis system to evaluate hydrogen release distribution and combustion in the containment of a Nuclear Power Plant (NPP) using MAAP GASFLOW and COM3D. In particular KAERI developed an analysis methodology for a hydrogen flame acceleration on the basis of the COM3D validation results against measured data of the hydrogen combustion tests in the ENACCEF and THAI facilities. The proposed analysis methodology accurately predicted the peak overpressure with an error range of approximately ±10% using the Kawanabe model used for a turbulent flame speed in the COM3D. KAERI performed a hydrogen flame acceleration analysis using the multi-dimensional hydrogen analysis system for a severe accident initiated by a station blackout (SBO) under the assumption of 100% metal–water reaction in the Reactor Pressure Vessel (RPV) to evaluate an overpressure buildup in the containment of the Advanced Power Reactor 1400 MWe (APR1400). The magnitude of the overpressure buildup in the APR1400 containment might be used as a criterion to judge whether the containment integrity is maintained or not when the hydrogen combustion occurs during a severe accident. The COM3D calculation results using the established analysis methodology showed that the calculated peak pressure in the containment was lower than the fracture pressure of the APR1400 containment. This calculation result might have resulted from a large air volume of the containment a reduced hydrogen concentration owing to passive auto-catalytic recombiners installed in the containment during the hydrogen release from the RPV and a lot of stem presence during the hydrogen combustion period in the containment. Therefore we found that the current design of the APR1400 containment maintained its integrity when the flame acceleration occurred during the severe accident initiated by the SBO accident.

A compact air-breathing jet hybrid-electric engine coupled with solid oxide fuel cells (SOFC) is proposed to develop the propulsion system with high power-weight ratios and specific thrust. The heat exchanger for preheating air is integrated with nozzles. Therefore the exhaust in the nozzle expands during the heat exchange with compressed air. The nozzle inlet temperature is obviously improved. SOFCs can directly utilize the fuel of liquid natural gas after being heated. The performance parameters of the engine are acquired according to the built thermodynamic and mass models. The main conclusions are as follows. 1) The specific thrust of the engine is improved by 20.25% compared with that of the traditional jet engine. As pressure ratios rise the specific thrust increases up to 1.7 kN/(kg·s⁻¹). Meanwhile the nozzle inlet temperature decreases. However the temperature increases for the traditional combustion engine. 2) The power-weight ratio of the engine is superior to that of internal combustion engines and inferior to that of turbine engines when the power density of SOFC would be assumed to be that predicted for 2030. 3) The total pressure recovery coefficients of SOFCs combustors and preheaters have an obvious influence on the specific thrust of the engine and the power-weight ratio of the engine is strongly affected by the power density of SOFCs.

The European Union set a 2050 decarbonization target in the Paris Agreement to reduce carbon emissions by 90–95% relative to 1990 emission levels. The path toward achieving those deep decarbonization targets can take various shapes but will surely include a portfolio of economy-wide low-carbon energy technologies/options. The growth of the intermittent renewable power sources in the grid mix has helped reduce the carbon footprint of the electric power sector. Under the need for decarbonizing the electric power sector we simulated a low-carbon power system. We investigated the role of hydrogen for future electric power systems under current cost projections. The model optimizes the power generation mix economically for a given carbon constraint. The generation mix consists of intermittent renewable power sources (solar and wind) and dispatchable gas turbine and combined cycle units fuelled by natural gas with carbon capture and sequestration as well as hydrogen. We created several scenarios with battery storage options pumped hydro hydrogen storage and demand-side response (DSR). The results show that energy storage replaces power generation and pumped hydro entirely replaces battery storage under given conditions. The availability of pumped hydro storage and demand-side response reduced the total cost as well as the combination of solar photovoltaic and pumped hydro storage. Demand-side response reduces relatively costly dispatchable power generation reduces annual power generation halves the shadow carbon price and is a viable alternative to energy storage. The carbon constrain defines the generation mix and initializes the integration of hydrogen (H₂). Although the model rates power to gas with hydrogen as not economically viable in this power system under the given conditions and assumptions hydrogen is important for hard-to-abate sectors and enables sector coupling in a real energy system. This study discusses the potential for hydrogen beyond this model approach and shows the differences between cost optimization models and real-world feasibility.

One alternative for the storage and transport of hydrogen is blending a low amount of hydrogen (up to 15 or 20%) into existing natural gas grids. When demanded hydrogen can be then separated close to the end users using membranes. In this work composite alumina carbon molecular sieves membranes (Al-CMSM) supported on tubular porous alumina have been prepared and characterized. Single gas permeation studies showed that the H₂/CH₄ separation properties at 30 °C are well above the Robeson limit of polymeric membranes. H₂ permeation studies of the H2–CH4 mixture gases containing 5–20% of H2 show that the H2 purity depends on the H₂ content in the feed and the operating temperature. In the best scenario investigated in this work for samples containing 10% of H₂ with an inlet pressure of 7.5 bar and permeated pressure of 0.01 bar at 30 °C the H₂ purity obtained was 99.4%.