Applications & Pathways

The urgent global transition toward low-carbon energy systems has highlighted the need for systematic planning of hydrogen refueling stations (HRS) to facilitate clean energy adoption. This study develops an integrated framework for regional HRS layout optimization and carbon emission assessment considering population distribution land area and hydrogen demand. Using Hainan Province as a case study the model estimates regional hydrogen demand determines optimal HRS deployment evaluates spatial coverage and refueling distances and quantifies potential carbon emission reductions under various renewable energy scenarios. Model validation with Haikou demonstrates its reliability and applicability at the regional scale. Results indicate pronounced spatial disparities in hydrogen demand and infrastructure requirements emphasizing that prioritizing station deployment in densely populated urban areas can enhance accessibility and maximize emission reduction. The framework offers a practical data-efficient tool for policymakers and planners to guide early-stage hydrogen infrastructure development and supports strategies for regional decarbonization and sustainable energy transitions.

While community energy initiatives and pilot projects have demonstrated technical feasibility and economic benefits their site-specific nature limits transferability to systematic scalable investment models. This study addresses this gap by proposing a modular framework for Renewable Energy Valleys (REVs) developed from real-world Community Energy Lab (CEL) demonstrations in Crete Greece which is an island with pronounced seasonal demand fluctuation strong renewable potential and ongoing hydrogen valley initiatives. Four modular business schemes are defined each representing different sectoral contexts by combining a baseline of 50 residential units with one representative large consumer (hotel rural households with thermal loads municipal swimming pool or hydrogen bus). For each scheme a mixed-integer linear programming model is applied to optimally size and operate integrated solar PV wind battery (BAT) energy storage and hydrogen systems across three renewable energy penetration (REP) targets: 90% 95% and 99.9%. The framework incorporates stochastic demand modeling sector coupling and hierarchical dispatch schemes. Results highlight optimal technology configurations that minimize dependency on external sources and curtailment while enhancing reliability and sustainability under Mediterranean conditions. Results demonstrate significant variation in optimal configurations across sectors and targets with PV capacity ranging from 217 kW to 2840 kW battery storage from 624 kWh to 2822 kWh and hydrogen systems scaling from 65.2 kg to 192 kg storage capacity. The modular design of the framework enables replication beyond the specific context of Crete supporting the scalable development of Renewable Energy Valleys that can adapt to diverse sectoral mixes and regional conditions.

Driven by carbon neutrality goals electric–hydrogen coupled virtual power plants (EHCVPPs) integrate renewable hydrogen production with power system flexibility resources emerging as a critical technology for large-scale renewable integration. As distributed energy resources (DERs) within EHCVPPs diversify heterogeneous resources generate diversified market values. However inadequate benefit allocation mechanisms risk reducing participation incentives destabilizing cooperation and impairing operational efficiency. To address this benefit allocation must balance fairness and efficiency by incorporating DERs’ regulatory capabilities risk tolerance and revenue contributions. This study proposes a multi-stage benefit allocation framework incorporating risk–reward tradeoffs and an enhanced optimization model to ensure sustainable EHCVPP operations and scalability. The framework elucidates bidirectional risk–reward relationships between DERs and EHCVPPs. An individualized risk-adjusted allocation method and correction mechanism are introduced to address economic-centric inequities while a hierarchical scheme reduces computational complexity from diverse DERs. The results demonstrate that the optimized scheme moderately reduces high-risk participants’ shares increasing operator revenue by 0.69% demand-side gains by 3.56% and reducing generation-side losses by 1.32%. Environmental factors show measurable yet statistically insignificant impacts. The framework meets stakeholders’ satisfaction and minimizes deviation from reference allocations.

During the critical period of energy transition the collaborative optimization of the electricity-hydrogentransportation coupling system is of vital importance for achieving efficient energy utilization and sustainable development.This paper proposes a collaborative operation mechanism of Distributed Robust Optimization (DRO) considering carbon emissions. Firstly a Stackelberg game dynamic pricing strategy is constructed for the integrated energy station (IES) and the electricity-hydrogen hybrid charging station (HRS) where the upper-level IES optimizes the electricity price setting strategy and the lower-level HRS dynamically adjusts the electricity purchase-hydrogen production plan. Secondly the Wasserstein distance is used to describe the uncertainties of hydrogen vehicle loads and wind-solar power generation and a bisection algorithm-column constraint generation (BA-C&CG) hybrid algorithm is designed to solve the model. Finally the numerical example verification shows that the daily operation cost of HRS under the proposed mechanism is as low as 1108.53 EUR which is 10.58 % and 7.38 % lower than that of the commonly used stochastic optimization (SO) and robust optimization (RO) respectively. The variance analysis (F = 536.05P < 0.001) confirms that the cost advantage is statistically significant. In terms of carbon emission reduction effect the DRO-Stackelberg game model has the lowest daily carbon cost (6.98EUR). This mechanism effectively balances the economic and robustness of the system and the single dispatch calculation time is only 112.09 s meeting the real-time operation requirements of engineering. It provides technical support for the low-carbon collaborative operation of the electricity-hydrogen-transportation coupling system.

With the IMO’s 2050 decarbonization target hydrogen is a key zero-carbon fuel for shipping but the lack of systematic risk assessment methods for hydrogen-powered marine propulsion systems (under harsh marine conditions) hinders its large-scale application. To address this gap this study proposes an integrated risk evaluation framework by fusing Failure Mode Effects and Criticality Analysis (FMECA) with the Fuzzy Analytic Hierarchy Process (FAHP)—resolving the limitation of traditional single evaluation tools and adapting to the dynamic complexity of marine environments. Scientific findings from this framework confirm that hydrogen leakage high-pressure storage tank valve leakage and inverter overload are the three most critical failure modes with hydrogen leakage being the primary risk source due to its high severity and detection difficulty. Further hazard matrix analysis reveals two key risk mechanisms: one type of failure (e.g. insufficient hydrogen concentration) features “high severity but low detectability” requiring real-time monitoring; the other (e.g. distribution board tripping) shows “high frequency but controllable impact” calling for optimized operations. This classification provides a theoretical basis for precise risk prevention. Targeted improvement measures (e.g. dual-sealed valves redundant cooling circuits AI-based regulation) are proposed and quantitatively validated reducing the system’s overall risk value from 4.8 (moderate risk) to 1.8 (low risk). This study’s core contribution lies in developing a universally applicable scientific framework for marine hydrogen propulsion system risk assessment. It not only fills the methodological gap in traditional evaluations but also provides a theoretical basis for the safe promotion of hydrogen shipping supporting the scientific realization of the IMO’s decarbonization goal.

Liquid hydrogen (LH2) is a promising candidate for zero emission aviation but its cryogenic properties make the refuelling process fundamentally different from that of conventional jet fuels. Although previous studies have addressed LH2 storage and system integration detailed modelling of the refuelling process remains limited. This paper presents the first part of a two-part study focused on simulation of the refuelling process for an LH2-powered commercial aircraft. An existing tank model is substantially modified to more accurately capture relevant physical phenomena including heat transfer and droplet dynamics during top-fill spray injection. Newly available experimental data on LH2 no-vent filling enables direct validation of the model under conditions that match the experimental setup. A sensitivity analysis identifies the most influential parameters that affect model precision including loss coefficient droplet diameter radiative heat ingress and vent-closing pressure. The validated model forms the basis for Part 2 of this study in which it is applied to a representative LH2-powered commercial aircraft to simulate refuelling times quantify venting losses and assess the impact of key operational settings. These results support the design of efficient LH2 refuelling systems for future aircraft and airport infrastructure.

Hydrogen’s increasing potential as an alternative fuel for heavy-duty transport has led to the conversion of conventional diesel compression-ignition engines to spark-ignition hydrogen operation. Hydrogen’s broad flammability range enables leaner operation achieving both higher engine efficiency and near-zero emissions. In particular direct injection hydrogen combustion improves volumetric efficiency and reduces problems including pre-ignition and knock related to hydrogen port-fuel injection. In the present work we performed an optical investigation of direct injection (DI) hydrogen combustion under leaner mixture conditions. The study was conducted using a heavy-duty optical diesel engine modified for spark-ignition operation. Bottom-view natural flame luminosity and OH-PLIF imaging were conducted along with in-cylinder pressure measurements. Experiments were conducted at three air-excess ratios (3 3.4 and 3.8) with spark timings (ST) varied from − 15 ◦CA aTDC to − 30 ◦CA aTDC. Hydrogen injection ended at − 30 ◦CA aTDC with the start of injection adjusted accordingly to achieve the desired lambda conditions. The maximum IMEPg corresponded to the lowest COV of the IMEPg indicating optimal spark timing for lean DI hydrogen combustion. The optimized spark timing for λ = 3 λ = 3.4 and λ = 3.8 were occurred at − 25 ◦CA aTDC − 25 ◦CA aTDC and − 30 ◦CA aTDC respectively. The corresponding COV of IMEPg values were below 5 % indicating stable combustion. The flame kernel first initiates at the spark plug and then propagates toward the piston’s outer boundary however the flame propagation does not remain as a continuous front unlike port-fuel injected hydrogen combustion. The effect of fuel stratification is evident in combustion luminosity and OH-PLIF images showing pockets of varying intensity within the combustion chamber. Natural flame luminosity images reveal incomplete flame coverage and asymmetric combustion emphasizing the need for metal engine experiments to further quantify the unburned hydrogen and associated combustion losses.

The growing concern about the increase in European Union (EU)’s total CO2 emissions due to maritime activities and the ambitious goal of net zero emissions they are asked to fulfil by 2050 are leading the way to the adoption of new sustainable strategies. In this article a novel methodology for the classification of the sustainable actions is proposed. Moreover new indicators have been designed to compare the level of sustainable development of each port. Among them a new coefficient for the assessment of the Ports’ Potential Sustainability (PPS) have been designed. Main results showed that 56% of the actions were in the improvement and environmentally sustainable group while 19% were shift-economic actions related to the installation of technologies. As a matter of the fact all European ports under analysis have adopted cold ironing system which can reduce up to 4% of the global shipping emissions. Similarly 50% of them have already integrated renewables energies and prioritize equipment electrification in their processes. Finally the most relevant projects to optimize the energy consumption of daily operations and the main challenges that still need to be addressed have been analyzed showing the current trends maritime sector is undertaking to advance towards the sustainable development.

The last decade has been characterized by a growing environmental awareness and the rise of climate change concerns. Continuous advancement of renewable energy technologies in this context has taken a central stage on the global agenda leading to a diverse array of innovations ranging from cutting-edge green energy production technologies to advanced energy storage solutions. In this evolving context ensuring the sustainability of energy systems—through the reduction of carbon emissions enhancement of energy resilience and responsible resource integration—has become a primary objective of modern energy planning. The integration of hydrogen technologies for power-to-gas (P2G) and power-topower (P2P) and energy storage systems is one of the areas where the most remarkable progress is being made. However real case implementations are lagging behind expectations due to large-scale investments needed which under high energy price uncertainty act as a barrier to widespread adoption. This study proposes a risk-averse approach for sizing an Integrated Hybrid Energy System considering the uncertainty of electricity and gas prices. The problem is formulated as a mixed-integer program and tested on a real-world case study. The analysis sheds light on the value of synergies and innovative solutions that hold the promise of a cleaner more sustainable future for generations to come.

Contemporary research into decarbonized fuels such as H2/NH3 has highlighted complex challenges with applied combustion with marked changes in thermochemical properties leading to significant issues such as limited operational range flashback and instability particularly when attempts are made to optimize emissions production in conventional lean-premixed systems. Non-premixed configurations may address some of these issues but often lead to elevated NOx production particularly when ammonia is retained in the fuel mixture. Optimized fuel injection and blending strategies are essential to mitigate these challenges. This study investigates the application of a 75 %/25 %mol H2/NH3 blend in a swirl-stabilized combustor operated at elevated conditions of inlet temperature (500 K) and ambient pressure (0.11–0.6 MPa). A complex nonmonotonic relationship between swirl number and increasing ambient combustor pressure is demonstrated highlighting the intricate interplay between swirling flow structures and reaction kinetics which remains poorly understood. At medium swirl (SN = 0.8) an increase in pressure initially reduces NO emissions diminishing past ~0.3 MPa with an opposing trend evident for high swirl (SN = 2.0) as NO emissions fall rapidly when combustor pressure approaches 0.6 MPa. High-fidelity numerical modeling is presented to elucidate these interactions in detail. Numerical data generated using Detached Eddy Simulations (DES) were validated against experimental results to demonstrate a change in flame anchoring on the axial shear layer and marked change in recirculated flow structure successfully capturing the features of higher swirl number flows. Favorable comparisons are made with optical data and a reduction in NO emissions with increasing pressure is demonstrated to replicate changes to the swirling flame chemical kinetics. Findings provide valuable insights into the combustion behavior of hydrogen-rich ammonia flames contributing to the development of cleaner combustion technologies.