Applications & Pathways

Due to its high efficiency and reduced emissions new zero-emission hybrid electric vehicles have been selected as an attractive challenge for future transport applications. New zero -emission hybrid electric on the other hand has some major drawbacks from the complicated charging process. The hybrid electrical fuel cell system is introduced as the main source to intelligently control multi-source activities. An ultra-capacitor system is selected as the energy recovery assistance to monitor the fuel cell’s fast transient and peak power during critical periods. To regulate energy demand and supply an intelligent energy management system is proposed and tested through several constraints. The proposed approach system aims to act quickly against sudden circumstances related to hydrogen depletion in the prediction of the required fuel consumption basis. The proposed strategy tends to define the proper operating system according to energy demand and supply. The obtained results show that the designed system meets the targets set for the energy management unit by referring to an experimental velocity database.

The report considers two types of sustainable synthetic fuels: electro fuels (efuels) and synthetic biofuels. Efuels are made by combining hydrogen (from for example the electrolysis of water) with carbon dioxide (from direct air capture or a point source). Synthetic biofuels can be made from biological material (for example waste from forestry) or from further processing biofuels (for example ethanol).<br/>Whilst synthetic fuels can be “dropped in” to existing engines they are currently more expensive than fossil fuels and in the case of efuels could be thought of as an inefficient use of renewable electricity. However where renewable electricity is cheap and plentiful the manufacture and export of bulk efuels might make economic sense.<br/>Key research challenges identified include improving the fundamental understanding of catalysis; the need to produce cheap low-carbon hydrogen at scale; and developing sources of competitively priced low carbon energy are key to the development of synthetic efuels and biofuels. The UK has the research skills and capacity to improve many of these process steps such as in catalysis and biotechnology and to provide a further area of UK leadership in low-carbon energy.

Ammonia can be stored as a liquid under relatively easy conditions (Ambient temperature by applying 10 bar or Ambient pressure with the temperature of 239 K). At the same time liquid ammonia has a high hydrogen storage density and is therefore a particularly promising carrier for hydrogen storage. At the same time the current large-scale industrial synthesis of ammonia has long been mature and in the future it will be possible to achieve a zero-emission ammonia regeneration cycle system by replacing existing energy sources with renewable ones. Ammonia does not contain carbon and its use in fuel cells can avoid NOx production during energy release. high temperature solid oxide fuel cells can be directly fueled by ammonia and obtain good output characteristics but the challenges inherent in high temperature solid oxide fuel cells greatly limit the implementation of this option. Whereas PEMFC has gained initial commercial use however for PEMFC ammonia is a toxic gas so the general practice is to convert ammonia to pure hydrogen. Ammonia to hydrogen requires decomposition under high temperature and purification which increases the complexity of the fuel system. In contrast PEMFC that can use ammonia decomposition gas directly can simplify the fuel system and this option has already obtained preliminary experimental validation studies. The energy efficiency of the system obtained from the preliminary validation experiments is only 34–36% which is much lower than expected. Therefore this paper establishes a simulation model of PEMFC directly using ammonia decomposition gas as fuel to study the maximum efficiency of the system and the effect of the change of system parameters on the efficiency and the results show that the system efficiency can reach up to 45% under the condition of considering certain heat loss. Increasing the ammonia decomposition reaction temperature decreases the system efficiency but the effect is small and the system efficiency can reach 44% even at a temperature of 850°C. The results of the study can provide a reference for a more scientific and quantitative assessment of the potential value of direct ammonia decomposition gas-fueled PEMFC.

Alongside the rapid expansion of wind power installation in China wind curtailment is also mounting rapidly due to China’s energy endowment imbalance. The hydrogen-based wind-energy storage system becomes an alternative to solve the puzzle of wind power surplus. This article introduced China’s energy storage industry development and summarized the advantages of hydrogen-based wind-energy storage systems. From the perspective of resource conservation it estimated the environmental benefits of hydrogen-based wind-energy storages. This research also builds a valuation model based on the Real Options Theory to capture the distinctive flexible charging and discharging features of the hydrogen-based wind-energy storage systems. Based on the model simulation results including the investment value and operation decision of the hydrogen energy storage system with different electricity prices system parameters and different levels of subsidies are presented. The results show that the hydrogen storage system fed with the surplus wind power can annually save approximately 2.19–3.29 million tons of standard coal consumption. It will reduce 3.31–4.97 million tons of CO2 SO2 NOx and PM saving as much as 286.6–429.8 million yuan of environmental cost annually on average. The hydrogen-based wind-energy storage system’s value depends on the construction investment and operating costs and is also affected by the meanreverting nature and jumps or spikes in electricity prices. The market-oriented reform of China’s power sector is conducive to improve hydrogen-based wind-energy storage systems’ profitability. At present subsidies are still essential to reduce initial investment and attract enterprises to participate in hydrogen energy storage projects.

Reducing the carbon emissions from trucks is critical to achieving the carbon peak of road freight. Based on the prediction of truck population and well-to-wheel (WTW) emission analysis of traditional diesel trucks and potential clean trucks including natural gas battery-electric plug-in hybrid electric and hydrogen fuel cell the paper analyzed the total greenhouse gas (GHG) emissions of China's road freight under four scenarios including baseline policy facilitation (PF) technology breakthrough (TB) and PF-TB. The truck population from 2021 to 2035 is predicted based on regression analysis by selecting the data from 2002 to 2020 of the main variables such as the GDP scale road freight turnover road freight volume and the number of trucks. The study forecasts the truck population of different segments such as mini-duty trucks (MiDT) light-duty trucks (LDT) medium-duty trucks (MDT) and heavy-duty trucks (HDT). Relevant WTW emissions data are collected and adopted based on the popular truck in China's market PHEVs have better emission intensity especially in the HDT field which reduces by 51% compared with ICEVs. Results show that the scenario of TB and PF-TB can reach the carbon peak with 0.13% and 1.5% total GHG emissions reduction per year. In contrast the baseline and PF scenario fail the carbon peak due to only focusing on the number of clean trucks while lacking the restrictions on the GHG emission factors of energy and ignoring the improvement of trucks' energy efficiency and the total emissions increased by 29.76% and 16.69% respectively compared with 2020. As the insights adopting clean trucks has an important but limited effect which should coordinate with the transition to low carbon energy and the melioration of clean trucks to reach the carbon peak of road freight in China.

The establishment of near-autonomous micro-grids in commercial or public building complexes is gaining increasing popularity. Short-term storage capacity is provided by means of large battery installations or more often by the employees’ increasing use of electric vehicle batteries which are allowed to operate in bi-directional charging mode. In addition to the above short-term storage means a long-term storage medium is considered essential to the optimal operation of the building’s micro-grid. The most promising long-term energy storage carrier is hydrogen which is produced by standard electrolyzer units by exploiting the surplus electricity produced by photovoltaic installation due to the seasonal or weekly variation in a building’s electricity consumption. To this end a novel concept is studied in this paper. The details of the proposed concept are described in the context of a nearly Zero Energy Building (nZEB) and the associated micro-grid. The hydrogen produced is stored in a high-pressure tank to be used occasionally as fuel in an advanced technology hydrogen spark ignition engine which moves a synchronous generator. A size optimization study is carried out to determine the genset’s rating the electrolyzer units’ capacity and the tilt angle of the rooftop’s photovoltaic panels which minimize the building’s interaction with the external grid. The hydrogen-fueled genset engine is optimally sized to 40 kW (0.18 kW/kWp PV). The optimal tilt angle of the rooftop PV panels is 39◦ . The maximum capacity of the electrolyzer units is optimized to 72 kW (0.33 kWmax/kWp PV). The resulting system is tacitly assumed to integrate to an external hydrogen network to make up for the expected mismatches between hydrogen production and consumption. The significance of technology in addressing the current challenges in the field of energy storage and micro-grid optimization is discussed with an emphasis on its potential benefits. Moreover areas for further research are highlighted aiming to further advance sustainable energy solutions.

This study deals with the use of hydrogen for the de-carbonization of the Resources and Energy Intensive Industries (REIIs) and gives a specific insight of the situation of the steel-making industry. The growing use of hydrogen in our economy is synonym for an equal increase in electricity consumption. This results from the fact that the current most promising technologies of H2 production is water electrolysis. For this purpose the EU hydrogen strategy foresees a progressive ramp up of H2 production capacities. But bottlenecks (especially regarding energy needed for electrolysers) may occur. Capacities should reach 40 GW (around 10 Mt/y) by the end of 2030. The steel-making industry relies heavily on H2 to decarbonise its process (through direct iron ore reduction). Our study analyses the conditions under which this new process will be able to compete with both European and offshore existing carbonised assets (i.e. blast furnaces). It emphasises the need for integrated and consistent policies from carbon prices to the carbon border adjustment mechanism through carbon contracts for differences but also highlightsthat a better regulation of electricity prices should not be neglected.

To address the increasing hydrogen demand and carbon emissions of industrial parks this paper proposes an integrated energy system dispatch strategy considering multi-hydrogen supply and comprehensive demand response. This model adopts power-to-gas technology to produce green hydrogen replacing a portion of gray hydrogen and incorporates a carbon capture system to effectively reduce the overall carbon emissions of the industrial park. Meanwhile incentive-based and price-based demand response strategies are implemented to optimize the load curve. A scheduling model is established targeting the minimization of procurement operation carbon emission and wind curtailment costs. The case study of a northern industrial park in China demonstrates that the joint supply of green and gray hydrogen reduces carbon emissions by 40.98% and costs by 17.93% compared to solely using gray hydrogen. The proposed approach successfully coordinates the economic and environmental performance of the integrated energy system. This study provides an effective scheduling strategy for industrial parks to accommodate high shares of renewables while meeting hydrogen needs and carbon reduction targets.

With the rapid promotion of renewable energy technologies and the trend to a low-carbon society the positive impacts of an integrated energy system that realizes various forms of energy-utilizing improvement and carbon reduction have fully emerged. Hydrogen with a decarbonized characteristic being integrated into the integrated energy system has become a viable option to offset the intermittency of renewables and decline the fossil fuel usage. An optimal planning model of a wind–photovoltaic–hydrogen storage-integrated energy system with the objective of total economic and environmental cost minimization by considering various energy technology investments is proposed. Case studies are developed to compare the economic and environmental benefits of different energy investment scenarios especially hydrogen applications. The cost–benefit analysis was carried out to prove that hydrogen investment is not a cost-competitive option but can alleviate the burden of carbon emissions somehow. Finally sensitivity analysis of key parameters of sale capacity carbon tax and renewable penetration level was performed to indicate the rational investment for a wind–photovoltaic–hydrogen storage-integrated energy system.

Polymer electrolyte membrane (PEM) fuel cells are electrochemical devices that directly convert the chemical energy stored in fuel into electrical energy with a practical conversion efficiency as high as 65%. In the past years significant progress has been made in PEM fuel cell commercialization. By 2019 there were over 19000 fuel cell electric vehicles (FCEV) and 340 hydrogen refueling stations (HRF) in the U.S. (~8000 and 44 respectively) Japan (~3600 and 112 respectively) South Korea (~5000 and 34 respectively) Europe (~2500 and 140 respectively) and China (~110 and 12 respectively). Japan South Korea and China plan to build approximately 3000 HRF stations by 2030. In 2019 Hyundai Nexo and Toyota Mirai accounted for approximately 63% and 32% of the total sales with a driving range of 380 and 312 miles and a mile per gallon (MPGe) of 65 and 67 respectively. Fundamentals of PEM fuel cells play a crucial role in the technological advancement to improve fuel cell performance/durability and reduce cost. Several key aspects for fuel cell design operational control and material development such as durability electrocatalyst materials water and thermal management dynamic operation and cold start are briefly explained in this work. Machine learning and artificial intelligence (AI) have received increasing attention in material/energy development. This review also discusses their applications and potential in the development of fundamental knowledge and correlations material selection and improvement cell design and optimization system control power management and monitoring of operation health for PEM fuel cells along with main physics in PEM fuel cells for physics-informed machine learning. The objective of this review is three fold: (1) to present the most recent status of PEM fuel cell applications in the portable stationary and transportation sectors; (2) to describe the important fundamentals for the further advancement of fuel cell technology in terms of design and control optimization cost reduction and durability improvement; and (3) to explain machine learning physics-informed deep learning and AI methods and describe their significant potentials in PEM fuel cell research and development (R&D).

This paper discusses fuel cell electric vehicles and more specifically the challenges and development of hydrogen-fueled buses for people accessing this transportation in cities and urban environments. The study reveals the main innovations and challenges in the field of hydrogen bus deployment and identifies the most common approaches and errors in this area by extracting and critically appraising data from sources important to the energy perspective. Three aspects of the development and horizons of fuel cell electric buses are reviewed namely energy consumption energy efficiency and energy production. The first is associated with the need to ensure a useful and sustainable climate-neutral public transport. Herewith the properties of the hydrogen supply of electric buses and their benefits over gasoline gas and battery vehicles are discussed. The efficiency issue is related to the ratio of consumed and produced fuel in view of energy losses. Four types of engines–gasoline diesel gas and electrical–are evaluated in terms of well-to-wheel tank-to-wheel delivery and storage losses. The third problem arises from the production operating and disposal constraints of the society at the present juncture. Several future-oriented initiatives of the European Commission separate countries and companies are described. The study shows that the effectiveness of the FCEBs depends strongly on the energy generation used to produce hydrogen. In the countries where the renewables are the main energy sources the FCEBs are effective. In other regions they are not effective enough yet although the future horizons are quite broad.

Hydrogen energy is an important technical route to achieve carbon peak and carbon neutrality. Direct injection hydrogen engine is one of the ways of hydrogen energy application. It has the advantages of high thermal efficiency and limit/reduce abnormal combustion phenomena. In order to explore the cycle characteristics of direct injection hydrogen engine based on a 2.0L direct injection hydrogen engine an experimental study on the cycle characteristics of direct injection hydrogen engine was carried out. The experimental results show that cycle variation increases from 0.67% to 1.02% with the increasing of engine speed. The cycle variation decreases from 1.52% to 0.64% with the increasing of engine load. As the equivalence ratio increases the cycle variation first decreases significantly from 2.52% to 0.35% and then stabilizes. The ignition advance angle has a better angle to minimize the cycle variation. An experimental study on the influence of the start of injection on the cycle variation was carried out. As the engine speed/engine load is 2000rpm/4bar the cycle variation increases from 0.72% to 2.42% with the start of injection changing from -280°CA to -180°CA; then rapidly decreases to 0.99% and then increases to 2.26% with the start of injection changing from -180°CA to -100°CA. The experimental results show that SOI could cause significant influence on cycle variation because of intake valve closing and shortening mixing time and both the process of intake valve closing and lagging the SOI could cause the cycle variation to increase. The SOI remarkably affects the cycle variation at low engine load/equivalence ratio and high engine speed. This study lays the foundation for the follow-up research of hydrogen engine performance matching of the cycle variation.

The growing popularity of renewable energy and hydrogen‐powered vehicles (HVs) will facilitate the coordinated optimization of energy and transportation systems for economic and en‐ vironmental benefits. However little research attention has been paid to dynamic hydrogen pricing and its impact on the optimal performance of energy and transportation systems. To reduce the dependency on centralized controllers and protect information privacy a time‐decoupling layered optimization strategy is put forward to realize the low‐carbon and economic operation of energy and transportation systems under dynamic hydrogen pricing. First a dynamic hydrogen pricing mechanism was formulated on the basis of the share of renewable power in the energy supply and introduced into the optimization of distributed energy stations (DESs) which will promote hydro‐ gen production using renewable power and minimize the DES construction and operation cost. On the basis of the dynamic hydrogen price optimized by DESs and the traffic conditions on roads the raised user‐centric routing optimization method can select a minimum cost route for HVs to purchase fuels from a DES with low‐cost and/or low‐carbon hydrogen. Finally the effectiveness of the proposed optimization strategy was verified by simulations.

Low-carbon transition pathways oriented from different transition targets would result in a huge variation of energy system deployment and transition costs. Hydrogen is widely considered as an imperative energy carrier to reach carbon neutral targets. However hydrogen production either from non-fossil power or fossil fuels with carbon capture is closely linked with an energy supply system and has great impacts on its structure. Identifying an economically affordable transition pathway is attractive and energy infrastructure is critical due to massive investment and long life-span. In this paper a multi-regional multi-period and infrastructure-based model is proposed to quantify energy supply system transition costs with different low-carbon targets and hydrogen production alternatives and China is taken as a case study. Results show that fulfilling 2-degree and 1.5-degree temperature increase targets would result in 84% and 151% increases in system transition costs 114% and 246% increases in infrastructure investment and 211% and 339% increases in stranded investment compared to fulfilling stated policy targets. Producing hydrogen from coal would be economical when carbon capture and sequestration cost is lower than 437 yuan per tonne and reduce infrastructure investment and stranded coal investment by 16% and 35% respectively than producing hydrogen from renewable power.

The ignition of hydrogen in compression ignition (CI) engines by adding noble gas as a working gas can yield excellent thermal efficiency due to its high specific heat ratio. This paper emphasizes the potential of helium–oxygen atmosphere for hydrogen combustion in CI engines and provides data on the engine configuration. A simulation was conducted using Converge CFD software based on the Yanmar NF19SK engine parameters. Helium–oxygen atmosphere compression show promising hydrogen autoignition results with the in-cylinder temperature was significantly higher than that of air during the compression stroke. In a compression ignition engine with a low compression ratio (CR) and intake temperature helium–oxygen atmosphere is recognized as the best working gas for hydrogen combustion. The ambient intake temperature was sufficient for hydrogen ignition in low CR with minimal heat flux effect. The best intake temperature for optimum engine efficiency in a low CR engine is 340 K and the engine compression ratio for optimum engine efficiency at ambient intake temperature is CR12 with an acceptable cylinder wall heat flux value. The helium–oxygen atmosphere as a working gas for hydrogen combustion in CI engines should be consider based on the parameter provided for clean energy transition with higher thermal efficiency.

On this episode of Everything About Hydrogen we chat with Andrew Cunningham Founder and Director at GeoPura. GeoPura is enabling the production transport and use of zero-emissions fuels with innovative and commercially viable technology to decarbonise the global economy. As the world transitions away from fossils fuels there is an increasing need for reliable clean electricity. If global power demand continues to grow as expected the electricity grid system will need support from renewable energy sources such as hydrogen and fuel cell power generator. GeoPura seeks to address exactly that kind of need.

The podcast can be found on their website

"This paper investigates hydrogen storage and refueling technologies that were used in rail vehicles over the past 20 years as well as planned activities as part of demonstration projects or feasibility studies. Presented are details of the currently available technology and its vehicle integration market availability as well as standardization and research and development activities. A total of 80 international studies corporate announcements as well as vehicle and refueling demonstration projects were evaluated with regard to storage and refueling technology pressure level hydrogen amount and installation concepts inside rolling stock. Furthermore current hydrogen storage systems of worldwide manufacturers were analyzed in terms of technical data.<br/>We found that large fleets of hydrogen-fueled passenger railcars are currently being commissioned or are about to enter service along with many more vehicles on order worldwide. 35 MPa compressed gaseous storage system technology currently dominates in implementation projects. In terms of hydrogen storage requirements for railcars sufficient energy content and range are not a major barrier at present (assuming enough installation space is available). For this reason also hydrogen refueling stations required for 35 MPa vehicle operation are currently being set up worldwide.<br/>A wide variety of hydrogen demonstration and retrofit projects are currently underway for freight locomotive applications around the world in addition to completed and ongoing feasibility studies. Up to now no prevailing hydrogen storage technology emerged especially because line-haul locomotives are required to carry significantly more energy than passenger trains. The 35 MPa compressed storage systems commonly used in passenger trains offer too little energy density for mainline locomotive operation - alternative storage technologies are not yet established. Energy tender solutions could be an option to increase hydrogen storage capacity here."

Superior fuel economy higher torque and durability have led to the diesel engine being widely used in a variety of fields of application such as road transport agricultural vehicles earth moving machines and marine propulsion as well as fixed installations for electrical power generation. However diesel engines are plagued by high emissions of nitrogen oxides (NOx) particulate matter (PM) and carbon dioxide when conventional fuel is used. One possible solution is to use low-carbon gaseous fuel alongside diesel fuel by operating in a dual-fuel (DF) configuration as this system provides a low implementation cost alternative for the improvement of combustion efficiency in the conventional diesel engine. An initial step in this direction involved the replacement of diesel fuel with natural gas. However the consequent high levels of unburned hydrocarbons produced due to non-optimized engines led to a shift to carbon-free fuels such as hydrogen. Hydrogen can be injected into the intake manifold where it premixes with air then the addition of a small amount of diesel fuel auto-igniting easily provides multiple ignition sources for the gas. To evaluate the efficiency and pollutant emissions in dual-fuel diesel-hydrogen combustion a numerical CFD analysis was conducted and validated with the aid of experimental measurements on a research engine acquired at the test bench. The process of ignition of diesel fuel and flame propagation through a premixed air-hydrogen charge was represented the Autoignition-Induced Flame Propagation model included ANSYS-Forte software. Because of the inefficient operating conditions associated with the combustion the methodology was significantly improved by evaluating the laminar flame speed as a function of pressure temperature and equivalence ratio using Chemkin-Pro software. A numerical comparison was carried out among full hydrogen full methane and different hydrogen-methane mixtures with the same energy input in each case. The use of full hydrogen was characterized by enhanced combustion higher thermal efficiency and lower carbon emissions. However the higher temperatures that occurred for hydrogen combustion led to higher NOx emissions.

The crisscross progress of transportation and energy carries the migrating track of human society development and the evolution of civilization among which the decarbonization strategy is a key issue. Traffic carbon emissions account for 16.2% of total energy carbon emissions while road traffic carbon emissions account for 11.8% of total energy carbon emissions. Therefore road traffic is a vital battlefield in attaining the goal of decarbonization. Employing clean energy as an alternative fuel is of great significance to the transformation of the energy consumption structure in road transportation. Hydrogen and ammonia are renewable energy with the characteristics of being widely distributed and clean. Both exist naturally in nature and the products of complete combustion are substances (water and nitrogen) that do not pollute the atmosphere. Because it can promote agricultural production ammonia has a long history in human society. Both have the potential to replace traditional fossil fuel energy. An overview of the advantages of hydrogen and ammonia as well as their development in different countries such as the United States the European Union Japan and other major development regions is presented in this paper. Related research topics of hydrogen and ammonia’s production storage and transferring technology have also been analyzed and collated to stimulate the energy production chain for road transportation. The current cost of green hydrogen is between $2.70–$8.80 globally which is expected to approach $2–$6 by 2030. Furthermore the technical development of hydrogen and ammonia as a fuel for engines and fuel cells in road transportation is compared in detail and the tests practical applications and commercial popularization of these technologies are summarized respectively. Opportunities and challenges coexist in the era of the renewable energy. Based on the characteristics and development track of hydrogen and ammonia the joint development of these two types of energy is meant to be imperative. The collaborative development mode of hydrogen and ammonia together with the obstacles to their development of them are both compared and discussed. Finally referring to the efforts and experiences of different countries in promoting hydrogen and ammonia in road transportation corresponding constructive suggestions have been put forward for reference. At the end of the paper a framework diagram of hydrogen and ammonia industry chains is provided and the mutual promotion development relationship of the two energy sources is systematically summarized.

As an important component of hydrogen fuel cell vehicles the air compressor with an air foil bearing rotates at tens of thousands of revolutions per minute. The heat generation concentration problem caused by the high-speed motor loss seriously affects the safe and normal operation of the motor so it is very important to clarify the loss distribution of the high-speed motor and adopt a targeted loss reduction design for air compressor heat dissipation. In this paper for an air compressor with a foil bearing with a rated speed of 80000 rpm an empirical formula and a three-dimensional transient magnetic field finite element model are used to model and calculate the air friction loss stator core loss winding loss and permanent magnet eddy current loss. The accuracy of the analytical calculation method is verified by torque test experiments under different revolutions and the average simulation accuracy can reach 91.1%. Then the distribution of the air friction loss stator core loss winding loss and eddy current loss of the air compressor motor at different revolutions is obtained by using this method. The results show that the proposed method can effectively calculate the motor rotor loss of a high-speed air compressor with air foil bearing. Although the motor efficiency increases with the increase in motor speed the absolute value of loss also increases with the increase in motor speed. Stator core loss and air friction loss are the main sources of loss accounting for 55.64% and 29% of the total motor loss respectively. The electromagnetic loss of winding the eddy current and other alloys account for a relatively small proportion which is 15% in total. The conclusions obtained in this paper can effectively guide calculations of motor loss the motor heat dissipation design of a high-speed air compressor with an air foil bearing.

As a fuel for power generation high-pressure hydrogen gas is widely used for transportation and its efficient storage promotes the development of fuel cell vehicles (FCVs). However as the filling process takes such a short time the maximum temperature in the storage tank usually undergoes a rapid increase which has become a thorny problem and poses great technical challenges to the steady operation of hydrogen FCVs. For security reasons SAE J2601/ISO 15869 regulates a maximum temperature limit of 85 ◦C in the specifications for refillable hydrogen tanks. In this paper a two-dimensional axisymmetric and a three-dimensional numerical model for fast charging of Type III 35 MPa and 70 MPa hydrogen vehicle cylinders are proposed in order to effectively evaluate the temperature rise within vehicle tanks. A modified standard k-ε turbulence model is utilized to simulate hydrogen gas charging. The equation of state for hydrogen gas is adopted with the thermodynamic properties taken from the National Institute of Standards and Technology (NIST) database taking into account the impact of hydrogen gas’ compressibility. To validate the numerical model three groups of hydrogen rapid refueling experimental data are chosen. After a detailed comparison it is found that the simulated results calculated by the developed numerical model are in good agreement with the experimental results with average temperature differences at the end time of 2.56 K 4.08 K and 4.3 K. The present study provides a foundation for in-depth investigations on the structural mechanics analysis of hydrogen gas vessels during fast refueling and may supply some technical guidance on the design of charging experiments.

This opinion piece describes how the optimal integration of hydrogen-fuel-cell with battery in a heavy highly-utilised vehicle can extend vehicle range while cutting refuelling time and reducing cost compared to a pure battery electric vehicle.

The green hydrogen economy is considered one of the sustainable solutions to mitigate climate change. This study provides an economic analysis of a novel liquified hydrogen (LH2) tanker fuelled by hydrogen with a total capacity of ~280000 m3 of liquified hydrogen named ‘JAMILA’. An established economic method was applied to investigate the economic feasibility of the JAMILA ship as a contribution to the future zero-emission target. The systematic economic evaluation determined the net present value of the LH2 tanker internal rate of return payback period and economic value added to support and encourage shipyards and the industrial sector in general. The results indicate that the implementation of the LH2 tanker ship can cover the capital cost of the ship within no more than 2.5 years which represents 8.3% of the assumed 30-year operational life cycle of the project in the best maritime shipping prices conditions and 6 years in the worst-case shipping marine economic conditions. Therefore the assessment of the economic results shows that the LH2 tankers may be a worthwhile contribution to the green hydrogen economy.

Renewable energies such as the wind energy and solar energy generate low-carbon electricity which can directly charge battery electric vehicles (BEVs). Meanwhile the surplus electricity can be used to produce the “green hydrogen” which provides zero-emission hydrogen fuels to those fuel cell electric vehicles (FCEVs). In order to charge/refuel multi-energy vehicles we propose a novel scheme of hybrid hydrogen/electricity supply using cryogenic and superconducting technologies. In this scheme the green hydrogen is further liquefied into the high-density and low-pressure liquid hydrogen (LH2) for bulk energy storage and transmission. Taking the advantage of the cryogenic environment of LH2 (20 K) it can also be used as the cryogen to cool down super conducting cables to realize the virtually zero-loss power transmission from 100 % renewable sources to vehicle charging stations. This hybrid LH2/electricity energy pipeline can realize long-distance large-capacity and high efficiency clean energy transmission to fulfil the hybrid energy supply demand for BEVs and FCEVs. For the case of a 100 MW-class hybrid hydrogen/electricity supply station the system principle and energy management strategy are analyzed through 9 different operating sub-modes. The corresponding static and dynamic economic modeling are performed and the economic feasibility of the hybrid hydrogen/electricity supply is verified using life-cycle analysis. Taking an example of wind power capacity 1898 MWh and solar power capacity 1619 MWh per day the dynamic payback period is 15.06 years the profitability index is 1.17 the internal rate of return is 7.956 % and the accumulative NPV is 187.92 M$. The system design and techno-economic analysis can potentially offer a technically/economically superior solution for future multi-energy vehicle charging/refueling systems.

This paper reviews the background to New Energy Vehicles (NEV) policies in China and the key scientific and market challenges that need to be addressed to accelerate fuel cells (FCs) in the rapidly developing NEV market. The global significance of the Chinese market key players core FC technologies and future research priorities are discussed.