Production & Supply Chain
Electrolyzer Array Alternate Control Strategy Considering Wind Power Prediction
Aug 2022
Publication
Non grid connected wind power hydrogen production technology is of great significance for the large-scale comprehensive utilization of hydrogen energy and accelerating the development of clean energy. In this paper an electrolyzer power allocation and alternate control method for non grid connected wind power hydrogen production is proposed and the optimized control strategy are combined to predict the maximum wind power of certain time interval. While retaining the required data characteristics the instantaneous fluctuation of some wind power data is eliminated which provides a reliable basis for power distribution in the alternation control strategy of electrolyzer array. The case simulation verifies the effectiveness of the electrolyzer array control principle and the prediction of the maximum wind power. While ensuring the absorption effect and hydrogen production rate the service life and operation safety of the electrolyzer array are effectively improved by balancing the working state of each electrolyzer.
A Simulation Study on Evaluating the Influence of Impurities on Hydrogen Production in Geological Carbon Dioxide Storage
Sep 2023
Publication
In this study we examined the effect of CO2 injection into deep saline aquifers considering impurities present in blue hydrogen production. A fluid model was designed for reservoir conditions with impurity concentrations of 3.5 and 20%. The results showed that methane caused density decreases of 95.16 and 76.16% at 3.5 and 20% respectively whereas H2S caused decreases of 99.56 and 98.77% respectively. Viscosity decreased from 0.045 to 0.037 cp with increasing methane content up to 20%; however H2S did not affect the viscosity. Notably CO2 with H2S impacted these properties less than methane. Our simulation model was based on the Gorae-V properties and simulated injections for 10 years followed by 100 years of monitoring. Compared with the pure CO2 injection methane reached its maximum pressure after eight years and eleven months at 3.5% and eight years at 20% whereas H2S reached maximum pressure after nine years and two months and nine years and six months respectively. These timings affected the amount of CO2 injected. With methane as an impurity injection efficiency decreased up to 73.16% whereas with H2S it decreased up to 81.99% with increasing impurity concentration. The efficiency of CO2 storage in the dissolution and residual traps was analyzed to examine the impact of impurities. The residual trap efficiency consistently decreased with methane but increased with H2S. At 20% concentration the methane trap exhibited higher efficiency at the end of injection; however H2S had a higher efficiency at the monitoring endpoint. In carbon capture and storage projects methane impurities require removal whereas H2S may not necessitate desulfurization due to its minimal impact on CO2 storage efficiency. Thus the application of carbon capture and storage (CCS) to CO2 emissions containing H2S as an impurity may enable economically viable operations by reducing additional costs.
Open-source Project Feasibility Tools for Supporting Development of the Green Ammonia Value Chain
Nov 2022
Publication
Ammonia plays a vital role in feeding the world through fertilizer production as well as having other industrial uses. However current ammonia production processes rely heavily on fossil fuels mostly natural gas to generate hydrogen as a feedstock. There is an urgent need to re-design and decarbonise the production process to reduce greenhouse emissions and avoid dependence on volatile gas markets and a depleting resource base. Renewable energy driven electrolysis to generate hydrogen provides a viable pathway for producing carbon-free or green ammonia. However a key challenge associated with producing green ammonia is managing low cost but highly variable wind and solar renewable energy generation for hydrogen electrolysis while maintaining reliable operation of the less flexible ammonia synthesis unit. To date green ammonia production has only been demonstrated at pilot scale and optimising plant configurations and scaling up production facilities is an urgent task. Existing feasibility studies have demonstrated the ability to model and cost green ammonia production pathways that can overcome the technical and economic challenges. However these existing approaches are context specific demonstrating the ability to model and cost green ammonia production for defined locations with set configurations. In this paper we present a modelling framework that consolidates the array of configurations previously studied into a single framework that can be tailored to the location of interest. Our open-source green ammonia modelling and costing tool dynamically simulates the integration of renewable energy with a wide range of balancing power and storage options to meet the flexible demands of the green ammonia production process at hourly time resolution over a year or more. Unlike existing models the open-source implementation of our tool allows it to be used by a potentially wide range of stakeholders to explore their own projects and help guide the upscaling of green ammonia as a pathway for decarbonisation. Using Gladstone in Australia as a case study a 1 million tonne per annum (MMTPA) green ammonia plant is modelled and costed using price assumptions for major equipment in 2030 provided by the Australian Energy Market Operator (AEMO). Using a hybrid (solar PV and wind) renewable energy source and Battery Energy Storage System as balancing technology we estimate a levelized cost of ammonia (LCOA) between 0.69 and 0.92 USD kgNH3 -1 . While greater than historical ammonia production costs from natural gas falling renewables costs and emission reduction imperatives suggest a major future role for green ammonia.
Green Hydrogen Production through Ammonia Decomposition Using Non-Thermal Plasma
Sep 2023
Publication
Liquid hydrogen carriers will soon play a significant role in transporting energy. The key factors that are considered when assessing the applicability of ammonia cracking in large-scale projects are as follows: high energy density easy storage and distribution the simplicity of the overall process and a low or zero-carbon footprint. Thermal systems used for recovering H2 from ammonia require a reaction unit and catalyst that operates at a high temperature (550–800 ◦C) for the complete conversion of ammonia which has a negative effect on the economics of the process. A non-thermal plasma (NTP) solution is the answer to this problem. Ammonia becomes a reliable hydrogen carrier and in combination with NTP offers the high conversion of the dehydrogenation process at a relatively low temperature so that zero-carbon pure hydrogen can be transported over long distances. This paper provides a critical overview of ammonia decomposition systems that focus on non-thermal methods especially under plasma conditions. The review shows that the process has various positive aspects and is an innovative process that has only been reported to a limited extent.
Thermocatalytic Hydrogen Production Through Decomposition of Methane-A Review
Oct 2021
Publication
Consumption of fossil fuels especially in transport and energy-dependent sectors has led to large greenhouse gas production. Hydrogen is an exciting energy source that can serve our energy purposes and decrease toxic waste production. Decomposition of methane yields hydrogen devoid of COx components thereby aiding as an eco-friendly approach towards large-scale hydrogen production. This review article is focused on hydrogen production through thermocatalytic methane decomposition (TMD) for hydrogen production. The thermodynamics of this approach has been highlighted. Various methods of hydrogen production from fossil fuels and renewable resources were discussed. Methods including steam methane reforming partial oxidation of methane auto thermal reforming direct biomass gasification thermal water splitting methane pyrolysis aqueous reforming and coal gasification have been reported in this article. A detailed overview of the different types of catalysts available the reasons behind their deactivation and their possible regeneration methods were discussed. Finally we presented the challenges and future perspectives for hydrogen production via TMD. This review concluded that among all catalysts nickel ruthenium and platinum-based catalysts show the highest activity and catalytic efficiency and gave carbon-free hydrogen products during the TMD process. However their rapid deactivation at high temperatures still needs the attention of the scientific community.
Hydrogen Production by Solar Thermochemical Water-Splitting Cycle via a Beam Down Concentrator
May 2021
Publication
About 95% of the hydrogen presently produced is from natural gas and coal and the remaining 5% is generated as a by-product from the production of chlorine through electrolysis1 . In the hydrogen economy (Crabtree et al. 2004; Penner 2006; Marbán and Valdés-Solís 2007) hydrogen is produced entirely from renewable energy. The easiest approach to advance renewable energy production is through solar photovoltaic and electrolysis a pathway of high technology readiness level (TRL) suffering however from two downfalls. First of all electricity is already an energy carrier and transformation with a penalty into another energy carrier hydrogen is in principle flawed. The second problem is that the efficiency of commercial solar panels is relatively low. The cadmium telluride (CdTe) thin-film solar cells have a solar energy conversion efficiency of 17%. Production of hydrogen using the current best processes for water electrolysis has an efficiency of ∼70%. As here explained the concentrated solar energy may be used to produce hydrogen using thermochemical water-splitting cycles at much global higher efficiency (fuel energy to incident sun energy). This research and development (R&D) effort is therefore undertaken to increase the TRL of this approach as a viable and economical option.
A Green Route for Hydrogen Producton from Alkaline Thermal Treatment (ATT) of Biomass with Carbon Storage
Apr 2023
Publication
Hydrogen a green energy carrier is one of the most promising energy sources. However,it is currently mainly produced from depleting fossil fuels with high carbon emissions which has serious negative effects on the economy and environment. To address this issue sustainable hydrogen production from bio-energy with carbon capture and storage (HyBECCS) is an ideal technology to reduce global carbon emissions while meeting energy demand. This review presents an overview of the latest progress in alkaline thermal treatment (ATT) of biomass for hydrogen production with carbon storage especially focusing on the technical characteristics and related challenges from an industrial application perspective. Additionally the roles of alkali and catalyst in the ATT process are critically discussed and several aspects that have great influences on the ATT process such as biomass types reaction parameters and reactors are expounded. Finally the potential solutions to the general challenges and obstacles to the future industrial-scale application of ATT of biomass for hydrogen production are proposed.
Hydrogen Production by Water Electrolysis Technologies: A Review
Sep 2023
Publication
Hydrogen as an energy source has been identified as an optimal pathway for mitigating climate change by combining renewable electricity with water electrolysis systems. Proton exchange membrane (PEM) technology has received a substantial amount of attention because of its ability to efficiently produce high-purity hydrogen while minimising challenges associated with handling and maintenance. Another hydrogen generation technology alkaline water electrolysis (AWE) has been widely used in commercial hydrogen production applications. Anion exchange membrane (AEM) technology can produce hydrogen at relatively low costs because the noble metal catalysts used in PEM and AWE systems are replaced with conventional low-cost electrocatalysts. Solid oxide electrolyzer cell (SOEC) technology is another electrolysis technology for producing hydrogen at relatively high conversion efficiencies low cost and with low associated emissions. However the operating temperatures of SOECs are high which necessitates long startup times. This review addresses the current state of technologies capable of using impure water in water electrolysis systems. Commercially available water electrolysis systems were extensively discussed and compared. The technical barriers of hydrogen production by PEM and AEM were also investigated. Furthermore commercial PEM stack electrolyzer performance was evaluated using artificial river water (soft water). An integrated system approach was recommended for meeting the power and pure water demands using reversible seawater by combining renewable electricity water electrolysis and fuel cells. AEM performance was considered to be low requiring further developments to enhance the membrane’s lifetime.
Comparative Exergy and Environmental Assessment of the Residual Biomass Gasification Routes for Hydrogen and Ammonia Production
Jul 2023
Publication
The need to reduce the dependency of chemicals on fossil fuels has recently motivated the adoption of renewable energies in those sectors. In addition due to a growing population the treatment and disposition of residual biomass from agricultural processes such as sugar cane and orange bagasse or even from human waste such as sewage sludge will be a challenge for the next generation. These residual biomasses can be an attractive alternative for the production of environmentally friendly fuels and make the economy more circular and efficient. However these raw materials have been hitherto widely used as fuel for boilers or disposed of in sanitary landfills losing their capacity to generate other by-products in addition to contributing to the emissions of gases that promote global warming. For this reason this work analyzes and optimizes the biomass-based routes of biochemical production (namely hydrogen and ammonia) using the gasification of residual biomasses. Moreover the capture of biogenic CO2 aims to reduce the environmental burden leading to negative emissions in the overall energy system. In this context the chemical plants were designed modeled and simulated using Aspen plus™ software. The energy integration and optimization were performed using the OSMOSE Lua Platform. The exergy destruction exergy efficiency and general balance of the CO2 emissions were evaluated. As a result the irreversibility generated by the gasification unit has a relevant influence on the exergy efficiency of the entire plant. On the other hand an overall negative emission balance of −5.95 kgCO2/kgH2 in the hydrogen production route and −1.615 kgCO2/kgNH3 in the ammonia production route can be achieved thus removing from the atmosphere 0.901 tCO2/tbiomass and 1.096 tCO2/tbiomass respectively.
Blue Hydrogen Production from Natural Gas Reservoirs: A Review of Application and Feasibility
Feb 2023
Publication
Recently interest in developing H2 strategies with carbon capture and storage (CCS) technologies has surged. Considering that this paper reviews recent literature on blue H2 a potential low-carbon short-term solution during the H2 transition period. Three key aspects were the focus of this paper. First it presents the processes used for blue H2 production. Second it presents a detailed comparison between blue H2 and natural gas as fuels and energy carriers. The third aspect focuses on CO2 sequestration in depleted natural gas reservoirs an essential step for implementing blue H2. Globally ~ 75% of H2 is produced using steam methane reforming which requires CCS to obtain blue H2. Currently blue H2 needs to compete with other advancing technologies such as green H2 solar power battery storage etc. Compared to natural gas and liquefied natural gas blue H2 gas results in lower CO2 emissions since CCS is applied. However transporting liquefied and compressed blue H2 entails higher energy economic and environmental costs. CCS must be appropriately implemented to produce blue H2 successfully. Due to their established capacity to trap hydrocarbons over geologic time scales depleted natural gas reservoirs are regarded as a viable option for CCS. Such a conclusion is supported by several simulation studies and field projects in many countries. Additionally there is much field experience and knowledge on the injection and production performance of natural gas reservoirs. Therefore using the existing site infrastructure converting these formations into storage reservoirs is undemanding.
Energy Performance Assessment of a Solar-driven Thermochemical Cycle Device for Green Hydrogen Production
Sep 2023
Publication
This paper presents a novel dynamic simulation model for assessing the energy performance of solar-driven systems employed in green hydrogen production. The system consists of a parabolic dish collector that focuses solar radiation on two cerium-based thermochemical reactors. The model is based on a transient finitedifference method to simulate the thermal behaviour of the system and it integrates a theoretical analysis of materials and operating principles. Different empirical data were considered for experimentally validating it: a good agreement between experimental and simulated results was obtained for the temperatures calculated inside the thermochemical reactor (R2 = 0.99 MAPE = 6.3%) and the hourly flow rates of hydrogen oxygen and carbon monoxide (R2 = 0.96 MAPE = 10%) inside the thermochemical reactor. The model was implemented in a MatLab tool for the system dynamic analysis under different boundary conditions. Subsequently to explore the capability of this approach the developed tool was used for analysing the examined device operating in twelve different weather zones. The obtained results comprise heat maps of specific crucial instants and hourly dynamic trends showing redox reaction cycles occurring into the thermochemical reactors. The yearly hydrogen production ranges from 1.19 m3 /y to 1.64 m3 /y according to the hourly incident solar radiations outdoor air temperatures and wind speeds. New graphic tools for rapid feasibility studies are presented. The developed tools and the obtained results can be useful to the basic design of this technology and for the multi-objective optimization of its layout and main design/operating parameters.
Contribution to Net Zero Emissions of Integrating Hydrogen Production in Wastewater Treatment Plants
Jul 2023
Publication
The reliability of renewable hydrogen supply for off-take applications is critical to the future sustainable energy economy. Integrated water electrolysis can be deployed at distributed municipal wastewater treatment plants (WWTP) creating opportunity for reduction in carbon emissions through direct and indirect use of the electrolysis output. A novel energy shifting process where the co-produced oxygen is compressed and stored to enhance the utilisation of intermittent renewable electricity is analysed. The hydrogen produced can be used in local fuel cell electric buses to replace incumbent diesel buses for public transport. However quantifying the extent of carbon emission reduction of this conceptual integrated system is key. In this study the integration of hydrogen production at a case study WWTP of 26000 EP capacity and using the hydrogen in buses was compared with two conventional systems: the base case of a WWTP with grid electricity consumption offset by solar PV and the community’s independent use of diesel buses for transport and the non-integrated configuration with hydrogen produced at the bus refuelling location operated independently of the WWTP. The system response was analysed using a Microsoft Excel simulation model with hourly time steps over a 12-month time frame. The model included a control scheme for the reliable supply of hydrogen for public transport and oxygen to the WWTP and considered expected reductions in carbon intensity of the national grid level of solar PV curtailment electrolyser efficiency and size of the solar PV system. Results showed that by 2031 when Australia’s national electricity is forecast to achieve a carbon intensity of less than 0.186 kg CO2-e/kWh integrating water electrolysis at a municipal WWTP for producing hydrogen for use in local hydrogen buses produced less carbon emissions than continuing to use diesel buses and offsetting emissions by exporting renewable electricity to the grid. By 2034 an annual reduction of 390 t–CO2–e is expected after changing to the integrated configuration. Considering electrolyser efficiency improvements and curtailment of renewable electricity the reduction increases to 872.8 t–CO2–e.
Evaluation of Surplus Hydroelectricity Potential in Nepal until 2040 and its Use for Hydrogen Production Via Electrolysis
May 2023
Publication
The abundant hydro resources in Nepal have resulted in the generation of electricity almost exclusively from hydropower plants. Several hydropower plants are also currently under construction. There is no doubt that the surplus electricity will be significantly high in the coming years. Given the previous trend in electricity consumption it will be a challenge to maximize the use of surplus electricity. In this work the potential solutions to maximize the use of this surplus electricity have been analysed. Three approached are proposed: (i) increasing domestic electricity consumption by shifting the other energy use sectors to electricity (ii) cross-border export of electricity and (iii) conversion of electricity to hydrogen via electrolysis. The current state of energy demand and supply patterns in the country are presented. Future monthly demand forecasts and surplus electricity projections have been made. The hydrogen that can be produced with the surplus electricity via electrolysis is determined and an economic assessment is carried out for the produced hydrogen. The analysis of levelized cost of hydrogen (LCOH) under different scenarios resulted values ranging from 3.8 €/kg to 4.5 €/kg.
Is the Polish Solar-to-Hydrogen Pathway Green? A Carbon Footprint of AEM Electrolysis Hydrogen Based on an LCA
Apr 2023
Publication
Efforts to direct the economies of many countries towards low-carbon economies are being made in order to reduce their impact on global climate change. Within this process replacing fossil fuels with hydrogen will play an important role in the sectors where electrification is difficult or technically and economically ineffective. Hydrogen may also play a critical role in renewable energy storage processes. Thus the global hydrogen demand is expected to rise more than five times by 2050 while in the European Union a seven-fold rise in this field is expected. Apart from many technical and legislative barriers the environmental impact of hydrogen production is a key issue especially in the case of new and developing technologies. Focusing on the various pathways of hydrogen production the essential problem is to evaluate the related emissions through GHG accounting considering the life cycle of a plant in order to compare the technologies effectively. Anion exchange membrane (AEM) electrolysis is one of the newest technologies in this field with no LCA studies covering its full operation. Thus this study is focused on a calculation of the carbon footprint and economic indicators of a green hydrogen plant on the basis of a life cycle assessment including the concept of a solar-to-hydrogen plant with AEM electrolyzers operating under Polish climate conditions. The authors set the range of the GWP indicators as 2.73–4.34 kgCO2eq for a plant using AEM electrolysis which confirmed the relatively low emissivity of hydrogen from solar energy also in relation to this innovative technology. The economic profitability of the investment depends on external subsidies because as developing technology the AEM electrolysis of green hydrogen from photovoltaics is still uncompetitive in terms of its cost without this type of support.
Decommissioning Platforms to Offshore Solar System: Road to Green Hydrogen Production from Seawater
May 2023
Publication
With more than 140 offshore platforms identified in Malaysian water to be decommissioned within 10 years it is critical for the Oil and Gas operators to re-evaluate the overall decommissioning strategies for a more sustainable approach. A revision to the current decommissioning options with inclusion of green decommissioning plan to the overall decision tree will assist in accelerating sustainable decision making. Using the advantage of the available 3D modelling from Naviswork and convert to PVSyst software for solar analysis to the one of the shortlisted offshore gas complexes in Malaysia three solar powered generation scenario was evaluated with aimed to establish the best integrated system on a modified decommissioned unmanned processing platform to generate cleaner energy. Financial assessment inclusive of Levelized Cost of Electricity as well as environmental assessment for each scenario are evaluated together. From the study optimum tilt angle was determined resulted to best annual solar yield of 257MWh with performance ratio (PR) of 87% for on-grid scenario 1. Off-grid scenario 3 is used to understand the estimated green hydrogen production. A desktop investigation conducted to three (3) type of electrolysers resulted to 8.6 kg to 18 kg of green hydrogen based on the average daily solar yield produced in scenario 3. Using Proton Electron Membrane electrolyser to simulate the PV solar-to-hydrogen offshore system it is observed that 98% of annual solar fraction can be achieved with annual performance ratio of 74.5% with levelized cost of Hydrogen (LCOH) of $10.95 per kg. From financial assessment this study justifies platforms repurpose to renewable energy concept to be an attractive option since cost to decommission the identified complex was observed to be 11 times greater compared to investing for this proposed concept.
System-friendly Process Design: Optimizing Blue Hydrogen Production for Future Energy Systems
Aug 2022
Publication
While the effects of ongoing cost reductions in renewables batteries and electrolyzers on future energy systems have been extensively investigated the effects of significant advances in CO2 capture and storage (CCS) technologies have received much less attention. This research gap is addressed via a long-term (2050) energy system model loosely based on Germany yielding four main findings. First CCS-enabled pathways offer the greatest benefits in the hydrogen sector where hydrogen prices can be reduced by two-thirds relative to a scenario without CCS. Second advanced blue hydrogen technologies can reduce total system costs by 12% and enable negative CO2 emissions due to higher efficiencies and CO2 capture ratios. Third co-gasification of coal and biomass emerged as an important enabler of these promising results allowing efficient exploitation of limited biomass resources to achieve negative emissions and limit the dependence on imported natural gas. Finally CCS decarbonization pathways can practically and economically incorporate substantial shares of renewable energy to reduce fossil fuel dependence. Such diversification of primary energy inputs increases system resilience to the broad range of socio-techno-economic challenges facing the energy transition. In conclusion balanced blue-green pathways offer many benefits and deserve serious consideration in the global decarbonization effort.
Simulation and Techno-Economic Assessment of Hydrogen Production from Biomass Gasification-Based Processes: A Review
Nov 2022
Publication
The development of low-carbon fuels from renewable resources is a key measure to reduce carbon dioxide emissions and mitigate climate change. Biomass gasification with subsequent gas processing and purification is a promising route to produce low-carbon hydrogen. In the past decade simulation-based modelling using Aspen Plus software has supported the investigation of future potential industrial applications of this pathway. This article aims to provide a review of the modelling and economic assessment of woody biomass gasification-based hydrogen production with focus on the evaluation of the model accuracy in predicting producer gas composition in comparison with experimental data depending on the approach implemented. The assessment of comprehensive models which integrate biomass gasification with gas processing and purification highlights how downstream gas processing could improve the quality of the syngas and thus the hydrogen yield. The information in this article provides an overview of the current practices challenges and opportunities for future research particularly for the development of a comprehensive pathway for hydrogen production based on biomass gasification. Moreover this review includes a techno-economic assessment of biomass to hydrogen processes which will be useful for implementation at industrial-scale.
Techno-economic Analysis to Identify the Optimal Conditions for Green Hydrogen Production
Jun 2023
Publication
The intermittency of renewable energy sources necessitates energy storage to meet the full demand and balancing requirements of the grid. Green hydrogen (H2) is a chemical energy carrier that can be used in a flexible manner and store large amounts of energy for long periods of time. This techno-economic analysis investigates H2 production from wind using commercially available desalination and electrolysis units. Proton exchange membrane and alkaline electrolyser units are utilised and compared. The intermittency of wind is examined with comparison against grid-bought electricity. A model is developed to determine the selling price required to ensure profitability over a 10-year period. Firstly where H2 is produced using energy from the grid with electricity purchased when below a specified price point or between specified hours. In the second scenario a wind turbine is owned by the user and the electricity price is not considered while the turbine capital expenditure is. The price of H2 production from wind is found to be comparable with natural gas derived H2 at a larger scale with a minimum selling price calculated to be 4.85 £/kg at a setpoint of 500 kg of H2/hr. At a setpoint of 50 kg of H2/hr this is significantly higher at 12.10 £/kg. In both cases the alkaline electrolyser produced cheaper H2. This study demonstrates an economy of scale with H2 prices decreasing with increased scale. H2 prices are also closely linked to the capital expenditure with the equipment size space and safety identified as limiting factors.
Optimal Renewable Energy Distribution Between Gasifier and Electrolyzer for Syngas Generation in a Power and Biomass-to-Liquid Fuel Process
Jan 2022
Publication
By adding energy as hydrogen to the biomass-to-liquid (BtL) process several published studies have shown that carbon efficiency can be increased substantially. Hydrogen can be produced from renewable electrical energy through the electrolysis of water or steam. Adding high-temperature thermal energy to the gasifier will also increase the overall carbon efficiency. Here an economic criterion is applied to find the optimal distribution of adding electrical energy directly to the gasifier as opposed to the electrolysis unit. Three different technologies for electrolysis are applied: solid oxide steam electrolysis (SOEC) alkaline water electrolysis (AEL) and proton exchange membrane (PEM). It is shown that the addition of part of the renewable energy to the gasifier using electric heaters is always beneficial and that the electrolysis unit operating costs are a significant portion of the costs. With renewable electricity supplied at a cost of 50 USD/MWh and a capital cost of 1500 USD/kW installed SOEC the operating costs of electric heaters and SOEC account for more than 70% of the total costs. The energy efficiency of the electrolyzer is found to be more important than the capital cost. The optimal amount of energy added to the gasifier is about 37–39% of the energy in the biomass feed. A BtL process using renewable hydrogen imports at 2.5 USD/kg H2 or SOEC for hydrogen production at reduced electricity prices gives the best values for the economic objective.
Grid-supported Electrolytic Hydrogen Production: Cost of Climate Impact Using Dynamic Emission Factors
Aug 2023
Publication
Hydrogen production based on a combination of intermittent renewables and grid electricity is a promising approach for reducing emissions in hard-to-decarbonise sectors at lower costs. However for such a configuration to provide climate benefits it is crucial to ensure that the grid electricity consumed in the process is derived from low-carbon sources. This paper examined the use of hourly grid emission factors (EFs) to more accurately determine the short-term climate impact of dynamically operated electrolysers. A model of the interconnected northern European electricity system was developed and used to calculate average grid-mix and marginal EFs for the four bidding zones in Sweden. Operating a 10 MW electrolyser using a combination of onshore wind and grid electricity was found to decrease the levelised cost of hydrogen (LCOH) to 2.40–3.63 €/kgH2 compared with 4.68 €/kgH2 for wind-only operation. A trade-off between LCOH and short-term climate impact was revealed as specific marginal emissions could exceed 20 kgCO2eq/kgH2 at minimum LCOH. Both an emission-minimising operating strategy and an increased wind-to-electrolyser ratio was found to manage this trade-off by enabling simultaneous cost and emission reductions lowering the marginal carbon abatement cost (CAC) from 276.8 €/tCO2eq for wind-only operation to a minimum of 222.7 and 119.3 €/tCO2eq respectively. Both EF and LCOH variations were also identified between the bidding zones but with no notable impact on the marginal CAC. When using average grid-mix emission factors the climate impact was low and the CAC could be reduced to 71.3–200.0 €/tCO2eq. In relation to proposed EU policy it was demonstrated that abiding by hourly renewable temporal matching principles could ensure low marginal emissions at current levels of fossil fuels in the electricity mix.
Thermal Design of a Biohydrogen Production System Driven by Integrated Gasification Combined Cycle Waste Heat Using Dynamic Simulation
Apr 2022
Publication
Utilizing biological processes for hydrogen production via gasification is a promising alternative method to coal gasification. The present study proposes a dynamic simulation model that uses a one-dimensional heat-transfer analysis method to simulate a biohydrogen production system. The proposed model is based on an existing experimental design setup. It is used to simulate a biohydrogen production system driven by the waste heat from an integrated gasification combined cycle (IGCC) power plant equipped with carbon capture and storage technologies. The data from the simulated results are compared with the experimental measurement data to validate the developed model’s reliability. The results show good agreement between the experimental data and the developed model. The relative root-mean-square error for the heat storage feed-mixing and bioreactor tanks is 1.26% 3.59% and 1.78% respectively. After the developed model’s reliability is confirmed it is used to simulate and optimize the biohydrogen production system inside the IGCC power plant. The bioreactor tank’s time constant can be improved when reducing the operating volume of the feed-mixing tank by the scale factors of 0.75 and 0.50 leading to a 15.76% and 31.54% faster time constant respectively when compared with the existing design.
Minimizing the Cost of Hydrogen Production through Dynamic Polymer Electrolyte Membrane Electrolyzer Operation
Jun 2022
Publication
Growing imbalances between electricity demand and supply from variable renewable energy sources (VREs) create increasingly large swings in electricity prices. Polymer electrolyte membrane (PEM) electrolyzers can help to buffer against these imbalances and minimize the levelized cost of hydrogen (LCOH) by ramping up production of hydrogen through high-current-density operation when low-cost electricity is abundant and ramping down current density to operate efficiently when electricity prices are high. We introduce a technoeconomic model that optimizes current density profiles for dynamically operated electrolyzers while accounting for the potential of increased degradation rates to minimize LCOH for any given time-of-use (TOU) electricity pricing. This model is used to predict LCOH from different methods of operating a PEM electrolyzer for historical and projected electricity prices in California and Texas which were chosen due to their high penetration of VREs. Results reveal that dynamic operation could enable reductions in LCOH ranging from 2% to 63% for historical 2020 pricing and 1% to 53% for projected 2030 pricing. Moreover high-current-density operation above 2.5 A cm2 is increasingly justified at electricity prices below $0.03 kWh1 . These findings suggest an actionable means of lowering LCOH and guide PEM electrolyzer development toward devices that can operate efficiently at a range of current densities.
Review—Identifying Critical Gaps for Polymer Electrolyte Water Electrolysis Development
Feb 2017
Publication
Although polymer electrolyte water electrolyzers (PEWEs) have been used in small-scale (kW to tens of kW range) applications for several decades PEWE technology for hydrogen production in energy applications (power-to-gas power-to-fuel etc.) requires significant improvements in the technology to address the challenges associated with cost performance and durability. Systems with power of hundreds of kW or even MWs corresponding to hydrogen production rates of around 10 to 20 kg/h have started to appear in the past 5 years. The thin (∼0.2 mm) polymer electrolyte in the PEWE with low ohmic resistance compared to the alkaline cell with liquid electrolyte allows operation at high current densities of 1–3 A/cm2 and high differential pressure. This article after an introductory overview of the operating principles of PEWE and state-of-the-art discusses the state of understanding of key phenomena determining and limiting performance durability and commercial readiness identifies important ‘gaps’ in understanding and essential development needs to bring PEWE science & engineering forward to prosper in the energy market as one of its future backbone technologies. For this to be successful science engineering and process development as well as business and market development need to go hand in hand.
Renewable Hydrogen Production Processes for the Off-Gas Valorization in Integrated Steelworks through Hydrogen Intensified Methane and Methanol Syntheses
Nov 2020
Publication
Within integrated steelmaking industries significant research efforts are devoted to the efficient use of resources and the reduction of CO2 emissions. Integrated steelworks consume a considerable quantity of raw materials and produce a high amount of by-products such as off-gases currently used for the internal production of heat steam or electricity. These off-gases can be further valorized as feedstock for methane and methanol syntheses but their hydrogen content is often inadequate to reach high conversions in synthesis processes. The addition of hydrogen is fundamental and a suitable hydrogen production process must be selected to obtain advantages in process economy and sustainability. This paper presents a comparative analysis of different hydrogen production processes from renewable energy namely polymer electrolyte membrane electrolysis solid oxide electrolyze cell electrolysis and biomass gasification. Aspen Plus® V11-based models were developed and simulations were conducted for sensitivity analyses to acquire useful information related to the process behavior. Advantages and disadvantages for each considered process were highlighted. In addition the integration of the analyzed hydrogen production methods with methane and methanol syntheses is analyzed through further Aspen Plus®-based simulations. The pros and cons of the different hydrogen production options coupled with methane and methanol syntheses included in steelmaking industries are analyzed
Premier, Progress and Prospects in Renewable Hydrogen Generation: A Review
May 2023
Publication
Renewable hydrogen production has an opportunity to reduce carbon emissions in the transportation and industrial sectors. This method generates hydrogen utilizing renewable energy sources such as the sun wind and hydropower lowering the number of greenhouse gases released into the environment. In recent years considerable progress has been made in the production of sustainable hydrogen particularly in the disciplines of electrolysis biomass gasification and photoelectrochemical water splitting. This review article figures out the capacity efficiency and cost-effectiveness of hydrogen production from renewable sources effectively comparing the conventionally used technologies with the latest techniques which are getting better day by day with the implementation of the technological advancements. Governments investors and industry players are increasingly interested in manufacturing renewable hydrogen and the global need for clean energy is expanding. It is projected that facilities for manufacturing renewable hydrogen as well as infrastructure to support this development would expand hastening the transition to an environment-friendly and low-carbon economy
Hydrogen Role in the Valorization of Integrated Steelworks Process Off-gases through Methane and Methanol Syntheses
Jun 2021
Publication
The valorization of integrated steelworks process off-gases as feedstock for synthesizing methane and methanol is in line with European Green Deal challenges. However this target can be generally achieved only through process off-gases enrichment with hydrogen and use of cutting-edge syntheses reactors coupled to advanced control systems. These aspects are addressed in the RFCS project i3 upgrade and the central role of hydrogen was evident from the first stages of the project. First stationary scenario analyses showed that the required hydrogen amount is significant and existing renewable hydrogen production technologies are not ready to satisfy the demand in an economic perspective. The poor availability of low-cost green hydrogen as one of the main barriers for producing methane and methanol from process off-gases is further highlighted in the application of an ad-hoc developed dispatch controller for managing hydrogen intensified syntheses in integrated steelworks. The dispatch controller considers both economic and environmental impacts in the cost function and although significant environmental benefits are obtainable by exploiting process off-gases in the syntheses the current hydrogen costs highly affect the dispatch controller decisions. This underlines the need for big scale green hydrogen production processes and dedicated green markets for hydrogen-intensive industries which would ensure easy access to this fundamental gas paving the way for a C-lean and more sustainable steel production.
Assessing Sizing Optimality of OFF-GRID AC-Linked Solar PV-PEM Systems for Hydrogen Production
Jul 2023
Publication
Herein a novel methodology to perform optimal sizing of AC-linked solar PV-PEM systems is proposed. The novelty of this work is the proposition of the solar plant to electrolyzer capacity ratio (AC/AC ratio) as optimization variable. The impact of this AC/AC ratio on the Levelized Cost of Hydrogen (LCOH) and the deviation of the solar DC/AC ratio when optimized specifically for hydrogen production are quantified. Case studies covering a Global Horizontal Irradiation (GHI) range of 1400e2600 kWh/m2 -year are assessed. The obtained LCOHs range between 5.9 and 11.3 USD/kgH2 depending on sizing and location. The AC/AC ratio is found to strongly affect cost production and LCOH optimality while the optimal solar DC/AC ratio varies up to 54% when optimized to minimize the cost of hydrogen instead of the cost of energy only. Larger oversizing is required for low GHI locations; however H2 production is more sensitive to sizing ratios for high GHI locations.
Sustainable Ammonia Production Processes
Mar 2021
Publication
Due to the important role of ammonia as a fertilizer in the agricultural industry and its promising prospects as an energy carrier many studies have recently attempted to find the most environmentally benign energy efficient and economically viable production process for ammonia synthesis. The most commonly utilized ammonia production method is the Haber-Bosch process. The downside to this technology is the high greenhouse gas emissions surpassing 2.16 kgCO2-eq/kg NH3 and high amounts of energy usage of over 30 GJ/tonne NH3 mainly due to the strict operational conditions at high temperature and pressure. The most widely adopted technology for sustainable hydrogen production used for ammonia synthesis is water electrolysis coupled with renewable technologies such as wind and solar. In general a water electrolyzer requires a continuous supply of pretreated water with high purity levels for its operation. Moreover for production of 1 tonne of hydrogen 9 tonnes of water is required. Based on this data for the production of the same amount of ammonia through water electrolysis 233.6 million tonnes/yr of water is required. In this paper a critical review of different sustainable hydrogen production processes and emerging technologies for sustainable ammonia synthesis along with a comparative life cycle assessment of various ammonia production methods has been carried out. We find that through the review of each of the studied technologies either large amounts of GHG emissions are produced or high volumes of pretreated water is required or a combination of both these factors occur.
Design Strategies for Large Current Density Hydrogen Evolution Reaction
Apr 2022
Publication
Hydrogen energy is considered one of the cleanest and most promising alternatives to fossil fuel because the only combustion product is water. The development of water splitting electrocatalysts with Earth abundance cost-efficiency and high performance for large current density industrial applications is vital for H2 production. However most of the reported catalysts are usually tested within relatively small current densities (< 100 mA cm−2 ) which is far from satisfactory for industrial applications. In this minireview we summarize the latest progress of effective non-noble electrocatalysts for large current density hydrogen evolution reaction (HER) whose performance is comparable to that of noble metal-based catalysts. Then the design strategy of intrinsic activities and architecture design are discussed including self-supporting electrodes to avoid the detachment of active materials the superaerophobicity and superhydrophilicity to release H2 bubble in time and the mechanical properties to resist destructive stress. Finally some views on the further development of high current density HER electrocatalysts are proposed such as scale up of the synthesis process in situ characterization to reveal the micro mechanism and the implementation of catalysts into practical electrolyzers for the commercial application of as-developed catalysts. This review aimed to guide HER catalyst design and make large-scale hydrogen production one step further.
Aluminum-Based Fuels as Energy Carriers for Controllable Power and Hydrogen Generation—A Review
Dec 2022
Publication
Metallic aluminum is widely used in propellants energy-containing materials and batteries due to its high energy density. In addition to burning in the air aluminum can react with water to generate hydrogen. Aluminum is carbon-free and the solid-phase products can be recycled easily after the reaction. Micron aluminum powder is stable in the air and enables global trade. Aluminum metal is considered to be a viable recyclable carrier for clean energy. Based on the reaction characteristics of aluminum fuel in air and water this work summarizes the energy conversion system of aluminum fuel the combustion characteristics of aluminum and the recycling of aluminum. The conversion path and application direction of electric energy and chemistry in the aluminum energy conversion system are described. The reaction properties of aluminum in the air are described as well as the mode of activation and the effects of the aluminum-water reaction. In situ hydrogen production is achievable through the aluminum-water reaction. The development of low-carbon and energy-saving electrolytic aluminum technology is introduced. The work also analyzes the current difficulties and development directions for the large-scale application of aluminum fuel energy storage technology. The development of energy storage technology based on aluminum is conducive to transforming the energy structure.
Energy Sustainability Analysis (ESA) of Energy-Producing Processes: A Case Study on Distributed H2 Production
Sep 2019
Publication
In the sustainability context the performance of energy-producing technologies using different energy sources needs to be scored and compared. The selective criterion of a higher level of useful energy to feed an ever-increasing demand of energy to satisfy a wide range of endo- and exosomatic human needs seems adequate. In fact surplus energy is able to cover energy services only after compensating for the energy expenses incurred to build and to run the technology itself. This paper proposes an energy sustainability analysis (ESA) methodology based on the internal and external energy use of a given technology considering the entire energy trajectory from energy sources to useful energy. ESA analysis is conducted at two levels: (i) short-term by the use of the energy sustainability index (ESI) which is the first step to establish whether the energy produced is able to cover the direct energy expenses needed to run the technology and (ii) long-term by which all the indirect energy-quotas are considered i.e. all the additional energy requirements of the technology including the energy amortization quota necessary for the replacement of the technology at the end of its operative life. The long-term level of analysis is conducted by the evaluation of two indicators: the energy return per unit of energy invested (EROI) over the operative life and the energy payback-time (EPT) as the minimum lapse at which all energy expenditures for the production of materials and their construction can be repaid to society. The ESA methodology has been applied to the case study of H2 production at small-scale (10–15 kWH2) comparing three different technologies: (i) steam-methane reforming (SMR) (ii) solar-powered water electrolysis (SPWE) and (iii) two-stage anaerobic digestion (TSAD) in order to score the technologies from an energy sustainability perspective.
Up-to-Date Status of Geoscience in the Field of Natural Hydrogen with Consideration of Petroleum Issues
Sep 2023
Publication
The perspective of natural hydrogen as a clear carbon-free and renewable energy source appears very promising. There have been many studies reporting significant concentrations of natural hydrogen in different countries. However natural hydrogen is being extracted to generate electricity only in Mali. This issue originates from the fact that global attention has not been dedicated yet to the progression and promotion of the natural hydrogen field. Therefore being in the beginning stage natural hydrogen science needs further investigation especially in exploration techniques and exploitation technologies. The main incentive of this work is to analyze the latest advances and challenges pertinent to the natural hydrogen industry. The focus is on elaborating geological origins ground exposure types extraction techniques previous detections of natural hydrogen exploration methods and underground hydrogen storage (UHS). Thus the research strives to shed light on the current status of the natural hydrogen field chiefly from the geoscience perspective. The data collated in this review can be used as a useful reference for the scientists engineers and policymakers involved in this emerging renewable energy source.
Electrochemical Ammonia: Power to Ammonia Ratio and Balance of Plant Requirements for Two Different Electrolysis Approaches
Nov 2021
Publication
Electrochemical ammonia generation allows direct low pressure synthesis of ammonia as an alternative to the established Haber-Bosch process. The increasing need to drive industry with renewable electricity central to decarbonisation and electrochemical ammonia synthesis offers a possible efficient and low emission route for this increasingly important chemical. It also provides a potential route for more distributed and small-scale ammonia synthesis with a reduced production footprint. Electrochemical ammonia synthesis is still early stage but has seen recent acceleration in fundamental understanding. In this work two different ammonia electrolysis systems are considered. Balance of plant (BOP) requirements are presented and modelled to compare performance and determine trade-offs. The first option (water fed cell) uses direct ammonia synthesis from water and air. The second (hydrogen-fed cell) involves a two-step electrolysis approach firstly producing hydrogen followed by electrochemical ammonia generation. Results indicate that the water fed approach shows the most promise in achieving low energy demand for direct electrochemical ammonia generation. Breaking the reaction into two steps for the hydrogen fed approach introduces a source of inefficiency which is not overcome by reduced BOP energy demands and will only be an attractive pathway for reactors which promise both high efficiency and increased ammonia formation rate compared to water fed cells. The most optimised scenario investigated here with 90% faradaic efficiency (FE) and 1.5 V cell potential (75% nitrogen utilisation) gives a power to ammonia value of 15 kWh/kg NH3 for a water fed cell. For the best hydrogen fed arrangement the requirement is 19 kWh/kg NH3. This is achieved with 0.5 V cell potential and 75% utilisation of both hydrogen and nitrogen (90% FE). Modelling demonstrated that balance of plant requirements for electrochemical ammonia are significant. Electrochemical energy inputs dominate energy requirements at low FE however in cases of high FE the BOP accounts for approximately 50% of the total energy demand mostly from ammonia separation requirements. In the hydrogen fed cell arrangement it was also demonstrated that recycle of unconverted hydrogen is essential for efficient operation even in the case where this increases BOP energy inputs
Exploring the Possibility of Using Molten Carbonate Fuel Cell for the Flexible Coproduction of Hydrogen and Power
Sep 2021
Publication
Fuel cells are electrochemical devices that are conventionally used to convert the chemical energy of fuels into electricity while producing heat as a byproduct. High temperature fuel cells such as molten carbonate fuel cells and solid oxide fuel cells produce significant amounts of heat that can be used for internal reforming of fuels such as natural gas to produce gas mixtures which are rich in hydrogen while also producing electricity. This opens up the possibility of using high temperature fuel cells in systems designed for flexible coproduction of hydrogen and power at very high system efficiency. In a previous study the flowsheet software Cycle-Tempo has been used to determine the technical feasibility of a solid oxide fuel cell system for flexible coproduction of hydrogen and power by running the system at different fuel utilization factors (between 60 and 95%). Lower utilization factors correspond to higher hydrogen production while at a higher fuel utilization standard fuel cell operation is achieved. This study uses the same basis to investigate how a system with molten carbonate fuel cells performs in identical conditions also using Cycle-Tempo. A comparison is made with the results from the solid oxide fuel cell study.
Assessment of Greenhouse Gas Emissions from Hydrogen Production Processes: Turquoise Hydrogen vs. Steam Methane Reforming
Nov 2022
Publication
Hydrogen has received substantial attention because of its diverse application in the energy sector. Steam methane reforming (SMR) dominates the current hydrogen production and is the least expensive endothermic reaction to produce grey hydrogen. This technology provides the advantages of low cost and high energy efficiency; however it emits an enormous amount of CO2. Carbon capture storage (CCS) technology helps reduce these emissions by 47% to 53% producing blue hydrogen. Methane pyrolysis is an alternative to SMR that produces (ideally) CO2-free turquoise hydrogen. In practice methane pyrolysis reduces CO2 emissions by 71% compared to grey hydrogen and 46% compared to blue hydrogen. While carbon dioxide emissions decrease with CCS fugitive methane emissions (FMEs) for blue and turquoise hydrogen are higher than those for grey hydrogen because of the increased use of natural gas to power carbon capture. We undertake FMEs of 3.6% of natural gas consumption for individual processes. In this study we also explore the utilization of biogas as a feedstock and additional Boudouard reactions for efficient utilization of solid carbon from methane pyrolysis and carbon dioxide from biogas. The present study focuses on possible ways to reduce overall emissions from turquoise hydrogen to provide solutions for a sustainable low-CO2 energy source.
Additive Manufacturing for Proton Exchange Membrane (PEM) Hydrogen Technologies: Merits, Challenges, and Prospects
Jul 2023
Publication
With the growing demand for green technologies hydrogen energy devices such as Proton Exchange Membrane (PEM) fuel cells and water electrolysers have received accelerated developments. However the materials and manufacturing cost of these technologies are still relatively expensive which impedes their widespread commercialization. Additive Manufacturing (AM) commonly termed 3D Printing (3DP) with its advanced capabilities could be a potential pathway to solve the fabrication challenges of PEM parts. Herein in this paper the research studies on the novel AM fabrication methods of PEM components are thoroughly reviewed and analysed. The key performance properties such as corrosion and hydrogen embrittlement resistance of the additively manufactured materials in the PEM working environment are discussed to emphasise their reliability for the PEM systems. Additionally the major challenges and required future developments of AM technologies to unlock their full potential for PEM fabrication are identified. This paper provides insights from the latest research developments on the significance of advanced manufacturing technologies in developing sustainable energy systems to address the global energy challenges and climate change effects.
A Review of Recent Advances in Water-gas Shift Catalysis for Hydrogen Production
Aug 2020
Publication
The water-gas shift reaction (WGSR) is an intermediate reaction in hydrocarbon reforming processes considered one of the most important reactions for hydrogen production. Here water and carbon monoxide molecules react to generate hydrogen and carbon dioxide. From the thermodynamics aspect pressure does not have an impact whereas low-temperature conditions are suitable for high hydrogen selectivity because of the exothermic nature of the WGSR reaction. The performance of this reaction can be greatly enhanced in the presence of suitable catalysts. The WGSR has been widely studied due do the industrial significance resulting in a good volume of open literature on reactor design and catalyst development. A number of review articles are also available on the fundamental aspects of the reaction including thermodynamic analysis reaction condition optimization catalyst design and deactivation studies. Over the past few decades there has been an exceptional development of the catalyst characterization techniques such as near-ambient x-ray photoelectron spectroscopy (NA-XPS) and in situ transmission electron microscopy (in situ TEM) providing atomic level information in presence of gases at elevated temperatures. These tools have been crucial in providing nanoscale structural details and the dynamic changes during reaction conditions which were not available before. The present review is an attempt to gather the recent progress particularly in the past decade on the catalysts for low-temperature WGSR and their structural properties leading to new insights that can be used in the future for effective catalyst design. For the ease of reading the article is divided into subsections based on metals (noble and transition metal) oxide supports and carbon-based supports. It also aims at providing a brief overview of the reaction conditions by including a table of catalysts with synthesis methods reaction conditions and key observations for a quick reference. Based on our study of literature on noble metal catalysts atomic Pt substituted Mn3O4 shows almost full CO conversion at 260 °C itself with zero methane formation. In the case of transition metals group the inclusion of Cu in catalytic system seems to influence the CO conversion significantly and in some cases with CO conversion improvement by 65% at 280 °C. Moreover mesoporous ceria as a catalyst support shows great potential with reports of full CO conversion at a low temperature of 175 °C.
Hydrogen Environmental Benefits Depend on the Way of Production: An Overview of the Main Processes Production and Challenges by 2050
Jun 2021
Publication
Hydrogen (H2) is presented as an important alternative for clean energy and raw material in the modern world. However the environmental benefits are linked to its process of production. Herein the chemical aspects advantages/disadvantages and challenges of the main processes of H2 production from petroleum to water are described. The fossil fuel (FF)-based methods and the state-of-art strategies are outlined to produce hydrogen from water (electrolysis) wastewater and seawater. In addition a discussion based on a color code to classify the cleanliness of hydrogen production is introduced. By the end a summary of the hydrogen value chain addresses topics related to the financial aspects and perspective for 2050: green hydrogen and zero-emission carbon.
Methane Pyrolysis in a Liquid Metal Bubble Column Reactor for CO2-Free Production of Hydrogen
Oct 2023
Publication
In light of the growing interest in hydrogen as an energy carrier and reducing agent various industries including the iron and steel sector are considering the increased adoption of hydrogen. To meet the rising demand in energy-intensive industries the production of hydrogen must be significantly expanded and further developed. However current hydrogen production heavily relies on fossil-fuel-based methods resulting in a considerable environmental burden with approximately 10 tons of CO2 emissions per ton of hydrogen. To address this challenge methane pyrolysis offers a promising approach for producing clean hydrogen with reduced CO2 emissions. This process involves converting methane (CH4 ) into hydrogen and solid carbon significantly lowering the carbon footprint. This work aims to enhance and broaden the understanding of methane pyrolysis in a liquid metal bubble column reactor (LMBCR) by utilizing an expanded and improved experimental setup based on the reactor concept previously proposed by authors from Montanuniversitaet in 2022 and 2023. The focus is on investigating the process parameters’ temperature and methane input rate with regard to their impact on methane conversion. The liquid metal temperature exhibits a strong influence increasing methane conversion from 35% at 1150 ◦C to 74% at 1250 ◦C. In contrast the effect of the methane flow rate remains relatively small in the investigated range. Moreover an investigation is conducted to assess the impact of carbon layers covering the surface of the liquid metal column. Additionally a comparative analysis between the LMBCR and a blank tube reactor (BTR) is presented.
Opportunities for Flexible Electricity Loads such as Hydrogen Production from Curtailed Generation
Jun 2021
Publication
Variable low-cost low-carbon electricity that would otherwise be curtailed may provide a substantial economic opportunity for entities that can flexibly adapt their electricity consumption. We used historical hourly weather data over the contiguous U.S. to model the characteristics of least-cost electricity systems dominated by variable renewable generation that powered firm and flexible electricity demands (loads). Scenarios evaluated included variable wind and solar power battery storage and dispatchable natural gas with carbon capture and storage with electrolytic hydrogen representing a prototypical flexible load. When flexible loads were small excess generation capacity was available during most hours allowing flexible loads to operate at high capacity factors. Expanding the flexible loads allowed the least-cost systems to more fully utilize the generation capacity built to supply firm loads and thus reduced the average cost of delivered electricity. The macro-scale energy model indicated that variable renewable electricity systems optimized to supply firm loads at current costs could supply 25% or more additional flexible load with minimal capacity expansion while resulting in reduced average electricity costs (10% or less capacity expansion and 10% to 20% reduction in costs in our modeled scenarios). These results indicate that adding flexible loads to electricity systems will likely allow more full utilization of generation assets across a wide range of system architectures thus providing new energy services with infrastructure that is already needed to supply firm electricity loads.
An Insight into Carbon Nanomaterial-Based Photocatalytic Water Splitting for Green Hydrogen Production
Dec 2022
Publication
At present the energy shortage and environmental pollution are the burning global issues. For centuries fossil fuels have been used to meet worldwide energy demand. However thousands of tons of greenhouse gases are released into the atmosphere when fossil fuels are burned contributing to global warming. Therefore green energy must replace fossil fuels and hydrogen is a prime choice. Photocatalytic water splitting (PWS) under solar irradiation could address energy and environmental problems. In the past decade solar photocatalysts have been used to manufacture sustainable fuels. Scientists are working to synthesize a reliable affordable and light-efficient photocatalyst. Developing efficient photocatalysts for water redox reactions in suspension is a key to solar energy conversion. Semiconductor nanoparticles can be used as photocatalysts to accelerate redox reactions to generate chemical fuel or electricity. Carbon materials are substantial photocatalysts for total WS under solar irradiation due to their high activity high stability low cost easy production and structural diversity. Carbon-based materials such as graphene graphene oxide graphitic carbon nitride fullerenes carbon nanotubes and carbon quantum dots can be used as semiconductors photosensitizers cocatalysts and support materials. This review comprehensively explains how carbon-based composite materials function as photocatalytic semiconductors for hydrogen production the water-splitting mechanism and the chemistry of redox reactions. Also how heteroatom doping defects and surface functionalities etc. can influence the efficiency of carbon photocatalysts in H2 production. The challenges faced in the PWS process and future prospects are briefly discussed.
Review and Meta-analysis of Recent Life Cycle Assessments of Hydrogen Production
Apr 2023
Publication
The world is facing an urgent global climate challenge and hydrogen (H2) is increasingly valued as a carbon-free energy carrier that can play a prominent role in decarbonising economies. However the environmental impact of the different methods for hydrogen production are sometimes overlooked. This work provides a comprehensive overview of the environmental impacts and costs of a diverse range of methods for producing hydrogen. Ninety nine life cycle assessments (LCAs) of hydrogen production published between 2015 and 2022 are categorised by geography production method energy source goal and scope and compared by data sources and methodology. A meta-analysis of methodological choices is used to identify a subset of mutually comparable studies whose results are then compared initially by global warming potential (GWP) then low-GWP scenarios are compared by other indicators. The results show that the lowest GWP is achieved by methods that are currently more expensive (~US $4–9/kg H2) compared to the dominant methods of producing hydrogen from fossil fuels (~US $1–2/kg H2). The research finds that data are currently limited for comparing environmental indicators other than GWP such as terrestrial acidification or freshwater eutrophication. Recommendations are made for future LCAs of hydrogen production.
Economic Assessment of Clean Hydrogen Production from Fossil Fuels in the Intermountain-west Region, USA
Jan 2024
Publication
The transition from fossil fuels to carbon-neutral energy sources is necessary to reduce greenhouse gas (GHG) emissions and combat climate change. Hydrogen (H2) provides a promising path to harness fossil fuels to reduce emissions in sectors such as transportation. However regional economic analyses of various H2 production techniques are still lacking. We selected a well-known fossil fuel-exporting region the USA’s Intermountain-West (I-WEST) to analyze the carbon intensity of H2 production and demonstrate regional tradeoffs. Currently 78 % of global H2 production comes from natural gas and coal. Therefore we considered steam methane reforming (SMR) surface coal gasification (SCG) and underground coal gasification (UCG) as H2 production methods in this work. We developed the cost estimation frameworks of SMR SCG and UCG with and without carbon capture utilization and sequestration (CCUS). In addition we identified optimal sites for H2 hubs by considering the proximity to energy sources energy markets storage sites and CO2 sequestration sites. We included new production tax credits (PTCs) in the cost estimation to quantify the economic benefit of CCUS. Our results suggest that the UCG has the lowest levelized cost of H2 production due to the elimination of coal production cost. H2 production using the SMR process with 99 % carbon capture is profitable when the PTCs are considered. We also analyzed carbon utilization opportunities where CO2 conversion to formic acid is a promising profitable option. This work quantifies the potential of H2 production from fossil fuels in the I-WEST region a key parameter for designing energy transition pathways.
Recent Advances in High-Temperature Steam Electrolysis with Solid Oxide Electrolysers for Green Hydrogen Production
Apr 2023
Publication
Hydrogen is known to be the carbon-neutral alternative energy carrier with the highest energy density. Currently more than 95% of hydrogen production technologies rely on fossil fuels resulting in greenhouse gas emissions. Water electrolysis is one of the most widely used technologies for hydrogen generation. Nuclear power a renewable energy source can provide the heat needed for the process of steam electrolysis for clean hydrogen production. This review paper analyses the recent progress in hydrogen generation via high-temperature steam electrolysis through solid oxide electrolysis cells using nuclear thermal energy. Protons and oxygen-ions conducting solid oxide electrolysis processes are discussed in this paper. The scope of this review report covers a broad range including the recent advances in material development for each component (i.e. hydrogen electrode oxygen electrode electrolyte interconnect and sealant) degradation mechanisms and countermeasures to mitigate them.
Advances in Methanol Production and Utilization, with Particular Emphasis toward Hydrogen Generation via Membrane Reactor Technology
Oct 2018
Publication
Methanol is currently considered one of the most useful chemical products and is a promising building block for obtaining more complex chemical compounds such as acetic acid methyl tertiary butyl ether dimethyl ether methylamine etc. Methanol is the simplest alcohol appearing as a colorless liquid and with a distinctive smell and can be produced by converting CO2 and H2 with the further benefit of significantly reducing CO2 emissions in the atmosphere. Indeed methanol synthesis currently represents the second largest source of hydrogen consumption after ammonia production. Furthermore a wide range of literature is focused on methanol utilization as a convenient energy carrier for hydrogen production via steam and autothermal reforming partial oxidation methanol decomposition or methanol–water electrolysis reactions. Last but not least methanol supply for direct methanol fuel cells is a well-established technology for power production. The aim of this work is to propose an overview on the commonly used feedstocks (natural gas CO2 or char/biomass) and methanol production processes (from BASF—Badische Anilin und Soda Fabrik to ICI—Imperial Chemical Industries process) as well as on membrane reactor technology utilization for generating high grade hydrogen from the catalytic conversion of methanol reviewing the most updated state of the art in this field.
Carbon-negative Hydrogen Production (HyBECCS): An Exemplary Techno-economic and Environmental Assessment
Sep 2023
Publication
An exemplary techno-economic and environmental assessment of carbon-negative hydrogen (H2) production is carried out in this work. It is based on the so-called “dark photosynthesis” with carbon dioxide (CO2) capture and geological storage. As a special feature of the assessment the economic consequences due to the impact on the global climate are taken into account. The results indicate that the example project would be capable of generating negative GHG emissions under the assumptions made. The amount is estimated to be 17.72 kgCO2 to be removed from the atmosphere per kilogram of H2 produced. The levelized costs of carbon-negative hydrogen are obtained considering the economic impact of greenhouse gas emissions and removals. They are estimated to be 0.013 EUR/kWhH2. Compared to grey hydrogen from natural gas (0.12 EUR/kWhH2) and green hydrogen from electrolysis using renewable electricity (0.18 EUR/kWhH2) this shows a potential environmental-economic advantage of the considered example. Even without internalization of GHG impacts an economic advantage of the project (0.12 EUR/kWhH2) over green hydrogen (0.17 EUR/kWhH2) is indicated. Compared to other NETs the GHG removal efficiency is at the lower end of both BECCS and DACCS approaches.
Decarbonisation of Geographical Islands and the Feasibility of Green Hydrogen Production Using Excess Electricity
May 2023
Publication
Islands face limitations in producing and transporting energy due to their geographical constraints. To address this issue the ROBINSON project funded by the EU aims to create a flexible self-sufficient and environmentally friendly energy system that can be used on isolated islands. The feasibility of renewable electrification and heating system decarbonization of Eigerøy in Norway is described in this article. A mixed-integer linear programming framework was used for modelling. The optimization method is designed to be versatile and adaptable to suit individual scenarios with a flexible and modular formulation that can accommodate boundary conditions specific to each case. Onshore and offshore wind farms and utility-scale photovoltaic (PV) were considered to generate renewable electricity. Each option was found to be feasible under certain conditions. The heating system composed of a biomass gasifier a combined heat and power system with a gas boiler as backup unit was also analyzed. Parameters were identified in which the combination of all three thermal units represented the best system option. In addition the possibility of green hydrogen production based on the excess electricity from each scenario was evaluated.
Research Progress of Hydrogen Production Technology and Related Catalysts by Electrolysis of Water
Jun 2023
Publication
As a clean and renewable energy source for sustainable development hydrogen energy has gained a lot of attention from the general public and researchers. Hydrogen production by electrolysis of water is the most important approach to producing hydrogen and it is also the main way to realize carbon neutrality. In this paper the main technologies of hydrogen production by electrolysis of water are discussed in detail; their characteristics advantages and disadvantages are analyzed; and the selection criteria and design criteria of catalysts are presented. The catalysts used in various hydrogen production technologies and their characteristics are emphatically expounded aiming at optimizing the existing catalyst system and developing new high-performance high-stability and low-cost catalysts. Finally the problems and solutions in the practical design of catalysts are discussed and explored.
Climate Change Impacts on Gaseous Hydrogen (H2) Potential Produced by Photovoltaic Electrolysis for Stand-Alone or Grid Applications in Europe
Dec 2022
Publication
The EU’s hydrogen strategy consists of studying the potential for renewable hydrogen to help decarbonize the EU in a cost-effective way. Today hydrogen accounts for less than 2% of Europe’s energy consumption. It is primarily used to produce chemical products. However 96% of this hydrogen production is through natural gas leading to significant amounts of CO2 emissions. In this paper we investigated PV electrolysis H2 gas (noted H2(g)) production for mapping this resource at Europe’s scale. The Cordex/Copernicus RCPs scenarios allow for evaluating the impact of climate changes on the H2 -produced mass and the equivalent energy according to both extreme RCPs scenarios. New linear regressions are investigated to study the great dependence in H2(g) produced masses (kg·yr−1 ) and equivalent energies (MWh·yr−1 ) for European countries. Computational scenarios are investigated from a reference year (2005) to the end of the century (2100) by steps of 5 years. According to RCPs 2.6 (favorable)/8.5 (extreme) 31.7% and 77.4% of Europe’s area presents a decrease of H2(g)-produced masses between 2005 and 2100. For the unfavorable scenario (8.5) only a few regions located in the northeast of France Germany Austria Romania Bulgaria and Greece present a positive balance in H2(g) production for supplying remote houses or smart grids in electricity and heat energy.
R&D Status on Thermochemical IS Process for Hydrogen Production at JAEA
Nov 2012
Publication
Thermochemical hydrogen production process is one of the candidates of industrial fossil fuel free hydrogen production. Japan Atomic Energy Agency (JAEA) has been conducting R&D of the thermochemical water splitting iodine-sulfur (IS) process since the end of 1980s. This paper presents the recent study on the IS process in JAEA. In 2005-2009 test-fabrication of components collection of design database improvement of process components for higher thermal efficiency and proposition of composition measurement method were carried out. On the basis of them the integrity test of process components is carried out in 2010-2014 to examine their integrities in severe process environments. At present a Bunsen reactor which produces acids and incidental equipments has been already manufactured using corrosion resistant materials such as glass lining steel and fluoroplastic lining steel. Flow tests to examine the functionality and integrity of the materials are planned in 2012.
No more items...