Transmission, Distribution & Storage
A Multi-period Sustainable Hydrogen Supply Chain Model Considering Pipeline Routing and Carbon Emissions: The Case Study of Oman
Nov 2022
Publication
This paper presents a mathematical model for a multi-period hydrogen supply chain design problem considering several design features not addressed in other studies. The model is formulated as a mixed-integer program allowing the production and storage facilities to be extended over time. Pipeline and tube trailer transport modes are considered for carrying hydrogen. The model also allows finding the optimal pipeline routes and the number of transport units. The objective is to obtain an efficient supply chain design within a given time frame in a way that the demand and carbon dioxide emissions constraints are satisfied and the total cost is minimized. A computer program is developed to ease the problem-solving process. The computer program extracts the geographical information from Google Maps and solves the problem using an optimization solver. Finally the applicability of the proposed model is demonstrated in a case study from Oman.
Permeability Modeling and Estimation of Hydrogen Loss through Polymer Sealing Liners in Underground Hydrogen Storage
Apr 2022
Publication
Fluctuations in renewable energy production especially from solar and wind plants can be solved by large‐scale energy storage. One of the possibilities is storing energy in the form of hydrogen or methane–hydrogen blends. A viable alternative for storing hydrogen in salt caverns is Lined Rock Cavern (LRC) underground energy storage. One of the most significant challenges in LRC for hydrogen storage is sealing liners which need to have satisfactory sealing and mechanical properties. An experimental study of hydrogen permeability of different kinds of polymers was conducted followed by modeling of hydrogen permeability of these materials with different additives (graphite halloysite and fly ash). Fillers in polymers can have an impact on the hydrogen permeability ratio and reduce the amount of polymer required to make a sealing liner in the reservoir. Results of this study show that hydrogen permeability coefficients of polymers and estimated hydrogen leakage through these materials are similar to the results of salt rock after the salt creep process. During 60 days of hydrogen storage in a tank of 1000 m2 inner surface 1 cm thick sealing liner and gas pressure of 1.0 MPa only approx. 1 m3STP of hydrogen will diffuse from the reservoir. The study also carries out the modeling of the hydrogen permeability of materials using the Max‐ well model. The difference between experimental and model results is up to 17% compared to the differences exceeding 30% in some other studies.
Underground Bio-methanation: Concept and Potential
Feb 2020
Publication
As a major part of the energy turn around the European Union and other countries are supporting the development of renewable energy technologies to decrease nuclear and fossil energy production. Therefore efficient use of renewable energy resources is one challenge as they are influenced by environmental conditions and hence the intensity of resources such as wind or solar power fluctuates. To secure constant energy supply suitable energy storage and conversion techniques are required. An upcoming solution is the utilization and storage of hydrogen or hydrogen-rich natural gas in porous formations in the underground. In the past microbial methanation was observed as a side effect during these gas storage operations. The concept of underground bio-methanation arised which uses the microbial metabolism to convert hydrogen and carbon dioxide into methane. The concept consists of injecting gaseous hydrogen and carbon dioxide into an underground structure during energy production peaks which are subsequently partly converted into methane. The resulting methane-rich gas mixture is withdrawn during high energy demand. The concept is comparable to engineered bio-reactors which are already locally integrated into the gas infrastructure. In both technologies the conversion process of hydrogen into methane is driven by hydrogenotrophic methanogenic archaea present in the aqueous phase of the natural underground or above-ground engineered reactor. Nevertheless the porous medium in the underground provides compared to the engineered bio-reactors a larger interface between the gas and aqueous phase caused by the enormous volume in the underground porous media. The following article summarizes the potential and concept of underground methanation and the current state of the art in terms of laboratory investigations and pilot tests. A short system potential analysis shows that an underground bio-reactor with a storage capacity of 850 Mio. Sm3 could deliver methane to more than 600000 households based on a hydrogen production from renewable energies.
Evaluation of Conceptual Electrolysis-based Energy Storage Systems Using Gas Expanders
Feb 2020
Publication
In this study four energy storage systems (Power-to-Gas-to-Power) were analysed that allow electrolysis products to be fully utilized immediately after they are produced. For each option the electrolysis process was supplied with electricity from a wind farm during the off-peak demand periods. In the first two variants the produced hydrogen was directed to a natural gas pipeline while the third and fourth options assumed the use of hydrogen for synthetic natural gas production. All four variants assumed the use of a gas expander powered by high-temperature exhaust gases generated during gas combustion. In the first two options gas was supplied from a natural gas network while synthetic natural gas produced during methanation was used in the other two options. A characteristic feature of all systems was the combustion of gaseous fuels within a ballast-free oxidant atmosphere without nitrogen which is the fundamental component of air in conventional systems. The fifth variant was a reference for the systems equipped with gas expanders and assumed the use of fuel cells for power generation. To evaluate the individual variants the energy storage efficiency was defined and determined and the calculated overall efficiency ranged from 17.08 to 23.79% which may be comparable to fuel cells.
NewGasMet - Flow Metering of Renewable Gases (Biogas, Biomethane, Hydrogen, Syngas and Mixtures with Natural Gas): Effect of the Renewable Gases on the Uncertainty Budgets of Gas Meters
Sep 2022
Publication
During the study of the CEN/TC 237 standards “Gas meters” in the European Metrology Programme for Innovation and Research (EMPIR) project named NEWGASMET the impact of the renewable gases (biogas biomethane hydrogen syngas and mixtures with natural gas) on the uncertainty on the gas meter was discussed and described in several recommendation reports. This report is on the activity A2.1.15 where the objective is “Using input from A2.1.2-A2.1.8 FORCE with support from Cesame CMI NEL PTB VSL and ISSI will write a report on the effects of renewable gases on the uncertainty budgets of gas meters.”
Assessment of Operability and Inspection, Maintenance and Repair Requirements for Transmission Pipelines and Installations in Hydrogen Service
Apr 2021
Publication
This report has been prepared for Hytechnical work programme to support the technical strategy for repurposing existing transmission pipelines and installations for the transportation and distribution of hydrogen and natural gas / hydrogen blends. The aim of the Hytechnical work programme is to support the implementation of the IGEM supplements to the standards TD/1 TD/13 TD/3 and TD/4.<br/>The report covers a desk study into the requirements for the inspection maintenance operation and repair of above 7 bar natural gas pipelines and installations designed and operated in accordance with the standards existing IGEM/TD/1 and IGEM/TD/13 which are repurposed for hydrogen service.
A Comprehensive Evaluation of a Novel Integrated System Consisting of Hydrogen Boil-off Gas Reliquifying Process and Polymer Exchange Membrane Fuel Cell Using Exergoeconomic and Markov Analyses
Dec 2021
Publication
The price of constructing hydrogen generation units is very high and sometimes it is not possible to build them in the desired location so the transfer of hydrogen from the hydrogen generation system to the units that need it is justified. Since the storage of hydrogen gas needs a large volume and its transportation is very complex so if hydrogen is stored in liquid form this problem can be resolved. In transporting liquid hydrogen (LH2) over long distances owing to heat transfer to the environment the LH2 vaporizes forming boil-off gas (BOG). Herein in lieu of only reliquifying the BOG this study proposes and assesses a system employing the BOG partially as feed for a novel liquefaction process and also the remaining utilized in a proton exchange membrane fuel cell (PEMFC) to generate power. Using the cold energy of the onsite liquid oxygen utility of the LH2 cargo vessel the mixed refrigerant liquefaction cycle is further cooled down. In this regard by using 130 kg/h BOG as input 60.37 kg/h of liquid hydrogen is produced and the rest enters PEMFC with 552.7 kg/h oxygen to produce 1592 kW of power. The total thermal efficiency of the integrated system and electrical efficiency of the PEMFC is 83.18% and 68.76% respectively. Regarding the liquefaction cycle its specific power consumption (SPC) and coefficient of performance (COP) were achieved at 3.203 kWh/kgLH2 and 0.1876 respectively. The results of exergy analysis show that the exergy destruction of the whole system is 937.4 kW and also its exergy efficiency is calculated to be 58.38%. Exergoeconomic and Markov analyses have also been applied to the integrated system. Also by changing the important parameters of PEMFC its optimal performance has been extracted.
Impact of Polymers on Magnesium-Based Hydrogen Storage Systems
Jun 2022
Publication
In the present scenario much importance has been provided to hydrogen energy systems (HES) in the energy sector because of their clean and green behavior during utilization. The developments of novel techniques and materials have focused on overcoming the practical difficulties in the HES (production storage and utilization). Comparatively considerable attention needs to be provided in the hydrogen storage systems (HSS) because of physical-based storage (compressed gas cold/cryo compressed and liquid) issues such as low gravimetric/volumetric density storage conditions/parameters and safety. In material-based HSS a high amount of hydrogen can be effectively stored in materials via physical or chemical bonds. In different hydride materials Mg-based hydrides (Mg–H) showed considerable benefits such as low density hydrogen uptake and reversibility. However the inferior sorption kinetics and severe oxidation/contamination at exposure to air limit its benefits. There are numerous kinds of efforts like the inclusion of catalysts that have been made for Mg–H to alter the thermodynamic-related issues. Still those efforts do not overcome the oxidation/contamination-related issues. The developments of Mg–H encapsulated by gas-selective polymers can effectively and positively influence hydrogen sorption kinetics and prevent the Mg–H from contaminating (air and moisture). In this review the impact of different polymers (carboxymethyl cellulose polystyrene polyimide polypyrrole polyvinylpyrrolidone polyvinylidene fluoride polymethylpentene and poly(methyl methacrylate)) with Mg–H systems has been systematically reviewed. In polymer-encapsulated Mg–H the polymers act as a barrier for the reaction between Mg–H and O2/H2O selectively allowing the H2 gas and preventing the aggregation of hydride nanoparticles. Thus the H2 uptake amount and sorption kinetics improved considerably in Mg–H.
Pore-scale Study of Microbial Hydrogen Consumption and Wettability Alteration During Underground Hydrogen Storage
Feb 2023
Publication
Hydrogen can be a renewable energy carrier and is suggested to store renewable energy and mitigate carbon dioxide emissions. Subsurface storage of hydrogen in salt caverns deep saline formations and depleted oil/gas reservoirs would help to overcome imbalances between supply and demand of renewable energy. Hydrogen however is one of the most important electron donors for many subsurface microbial processes including methanogenesis sulfate reduction and acetogenesis. These processes cause hydrogen loss and changes of reservoir properties during geological hydrogen storage operations. Here we report the results of a typical halophilic sulfate-reducing bacterium growing in a microfluidic pore network saturated with hydrogen gas at 35 bar and 37°C. Test duration is 9 days. We observed a significant loss of H2 from microbial consumption after 2 days following injection into a microfluidic device. The consumption rate decreased over time as the microbial activity declined in the pore network. The consumption rate is influenced profoundly by the surface area of H2 bubbles and microbial activity. Microbial growth in the silicon pore network was observed to change the surface wettability from a water-wet to a neutral-wet state. Due to the coupling effect of H2 consumption by microbes and wettability alteration the number of disconnected H2 bubbles in the pore network increased sharply over time. These results may have significant implications for hydrogen recovery and gas injectivity. First pore-scale experimental results reveal the impacts of subsurface microbial growth on H2 in storage which are useful to estimate rapidly the risk of microbial growth during subsurface H2 storage. Second microvisual experiments provide critical observations of bubble-liquid interfacial area and reaction rate that are essential to the modeling that is needed to make long-term predictions. Third results help us to improve the selection criteria for future storage sites.
The Role of Hydrogen in the Corrosion and Cracking of Steels - A Review
Oct 2021
Publication
In many processes of steel industrial including steel manufacture storage and service hydrogen could be absorbed into metallic materials and the absorbed hydrogen seriously impaired its corrosion resistance. This paper provides a comprehensive review on the effects of hydrogen on passive film anodic dissolution pitting corrosion and stress corrosion cracking and based on the review the mechanism by which hydrogen promotes corrosion of steel and subsequently leads to cracking has been discussed. It is envisaged that hydrogen harms the stability of the passive film and as a result escalates anode’s activation of steel eventually leading to pitting and stress corrosion cracking.
Strategies for the Adoption of Hydrogen-Based Energy Storage Systems: An Exploratory Study in Australia
Aug 2022
Publication
A significant contribution to the reduction of carbon emissions will be enabled through the transition from a centralised fossil fuel system to a decentralised renewable electricity system. However due to the intermittent nature of renewable energy storage is required to provide a suitable response to dynamic loads and manage the excess generated electricity with utilisation during periods of low generation. This paper investigates the use of stationary hydrogen-based energy storage systems for microgrids and distributed energy resource systems. An exploratory study was conducted in Australia based on a mixed methodology. Ten Australian industry experts were interviewed to determine use cases for hydrogen-based energy storage systems’ requirements barriers methods and recommendations. This study suggests that the current cost of the electrolyser fuel cell and storage medium and the current low round-trip efficiency are the main elements inhibiting hydrogen-based energy storage systems. Limited industry and practical experience are barriers to the implementation of hydrogen storage systems. Government support could help scale hydrogen-based energy storage systems among early adopters and enablers. Furthermore collaboration and knowledge sharing could reduce risks allowing the involvement of more stakeholders. Competition and innovation could ultimately reduce the costs increasing the uptake of hydrogen storage systems.
Critical Parameters Controlling Wettability in Hydrogen Underground Storage - An Analytical Study
Sep 2022
Publication
Hypothesis.<br/>The large-scale implementation of hydrogen economy requires immense storage spaces to facilitate the periodic storage/production cycles. Extensive modelling of hydrogen transport in porous media is required to comprehend the hydrogen-induced complexities prior to storage to avoid energy loss. Wettability of hydrogen-brine-rock systems influence flow properties (e.g. capillary pressure and relative permeability curves) and the residual saturations which are all essential for subsurface hydrogen systems.<br/>Model.<br/>This study aims to understand which parameters critically control the contact angle for hydrogen-brine-rock systems using the surface force analysis following the DLVO theory and sensitivity analysis. Furthermore the effect of roughness is studied using the Cassie-Baxter model.<br/>Findings.<br/>Our results reveal no considerable difference between H2 and other gases such as N2. Besides the inclusion of roughness highly affects the observed apparent contact angles and even lead to water-repelling features. It was observed that contact angle does not vary significantly with variations of surface charge and density at high salinity which is representative for reservoir conditions. Based on the analysis it is speculated that the influence of roughness on contact angle becomes significant at low water saturation (i.e. high capillary pressure).
Thermodynamics, Energy Dissipation, and Figures of Merit of Energy Storage Systems—A Critical Review
Sep 2021
Publication
The path to the mitigation of global climate change and global carbon dioxide emissions avoidance leads to the large-scale substitution of fossil fuels for the generation of electricity with renewable energy sources. The transition to renewables necessitates the development of large-scale energy storage systems that will satisfy the hourly demand of the consumers. This paper offers an overview of the energy storage systems that are available to assist with the transition to renewable energy. The systems are classified as mechanical (PHS CAES flywheels springs) electromagnetic (capacitors electric and magnetic fields) electrochemical (batteries including flow batteries) hydrogen and thermal energy storage systems. Emphasis is placed on the magnitude of energy storage each system is able to achieve the thermodynamic characteristics the particular applications the systems are suitable for the pertinent figures of merit and the energy dissipation during the charging and discharging of the systems.
Energy Storage in Urban Areas: The Role of Energy Storage Facilities, a Review
Feb 2024
Publication
Positive Energy Districts can be defined as connected urban areas or energy-efficient and flexible buildings which emit zero greenhouse gases and manage surpluses of renewable energy production. Energy storage is crucial for providing flexibility and supporting renewable energy integration into the energy system. It can balance centralized and distributed energy generation while contributing to energy security. Energy storage can respond to supplement demand provide flexible generation and complement grid development. Photovoltaics and wind turbines together with solar thermal systems and biomass are widely used to generate electricity and heating respectively coupled with energy system storage facilities for electricity (i.e. batteries) or heat storage using latent or sensible heat. Energy storage technologies are crucial in modern grids and able to avoid peak charges by ensuring the reliability and efficiency of energy supply while supporting a growing transition to nondepletable power sources. This work aims to broaden the scientific and practical understanding of energy storage in urban areas in order to explore the flexibility potential in adopting feasible solutions at district scale where exploiting the space and resource-saving systems. The main objective is to present and critically discuss the available options for energy storage that can be used in urban areas to collect and distribute stored energy. The concerns regarding the installation and use of Energy Storage Systems are analyzed by referring to regulations and technical and environmental requirements as part of broader distribution systems or as separate parts. Electricity heat energy and hydrogen are the most favorable types of storage. However most of them need new regulations technological improvement and dissemination of knowledge to all people with the aim of better understanding the benefits provided.
Underground Storage of Hydrogen and Hydrogen/methane Mixtures in Porous Reservoirs: Influence of Reservoir Factors and Engineering Choices on Deliverability and Storage Operations
Jul 2023
Publication
Seasonal storage of natural gas (NG) which primarily consists of methane (CH4) has been practiced for more than a hundred years at underground gas storage (UGS) facilities that use depleted hydrocarbon reservoirs saline aquifers and salt caverns. To support a transition to a hydrogen (H2) economy similar facilities are envisioned for long-duration underground H2 storage (UHS) of either H2 or H2/CH4 mixtures. Experience with UGS can be used to guide the deployment of UHS so we identify and quantify factors (formation/fluid properties and engineering choices) that influence reservoir behavior (e.g. viscous fingering and gravity override) the required number of injection/withdrawal wells and required storage volume contrasting the differences between the storage of CH4 H2 and H2/CH4 mixtures. The most important engineering choices are found to be the H2 fraction in H2/CH4 mixtures storage depth and injection rate. Storage at greater depths (higher pressure) but with relatively lower temperature is more favorable because it maximizes volumetric energy-storage density while minimizing viscous fingering and gravity override due to buoyancy. To store an equivalent amount of energy storing H2/CH4 mixtures in UHS facilities will require more wells and greater reservoir volume than corresponding UGS facilities. We use our findings to make recommendations about further research needed to guide deployment of UHS in porous reservoirs.
Underground Hydrogen Storage: A UK Perspective
Oct 2023
Publication
Hydrogen is anticipated to play a key role in global decarbonization and within the UK’s pathway to achieving net zero targets. However as the production of hydrogen expands in line with government strategies a key concern is where this hydrogen will be stored for later use. This study assesses the different large-scale storage options in geological structures available to the UK and addresses the surrounding uncertainties moving towards establishing a hydrogen economy. Currently salt caverns look to be the most favourable option considering their proven experience in the storage of hydrogen especially high purity hydrogen natural sealing properties low cushion gas requirement and high charge and discharge rates. However their geographical availability within the UK can act as a major constraint. Additionally a substantial increase in the number of new caverns will be necessary to meet the UK’s storage demand. Salt caverns have greater applicability as a good short-term storage solution however storage in porous media such as depleted hydrocarbon reservoirs and saline aquifers can be seen as a long-term and strategic solution to meet energy demand and achieve energy security. Porous media storage solutions are estimated to have capacities which far exceed projected storage demand. Depleted fields have generally been well explored prior to hydrocarbon extraction. Although many saline aquifers are available offshore UK geological characterizations are still required to identify the right candidates for hydrogen storage. Currently the advantages of depleted gas reservoirs over saline aquifers make them the favoured option after salt caverns.
A Review on Thermal Coupling of Metal Hydride Storage Tanks with Fuel Cells and Electrolyzers
Dec 2022
Publication
Hydrogen is one of the energy carriers that has started to play a significant role in the clean energy transition. In the hydrogen ecosystem storing hydrogen safely and with high volumetric density plays a key role. In this regard metal hydride storage seems to be superior to compressed gas storage which is the most common method used today. However thermal management is a challenge that needs to be considered. Temperature changes occur during charging and discharging processes due to the reactions between metal metal hydride and hydrogen which affect the inflow or outflow of hydrogen at the desired flow rate. There are different thermal management techniques to handle this challenge in the literature. When the metal hydride storage tanks are used in integrated systems together with a fuel cell and/or an electrolyzer the thermal interactions between these components can be used for this purpose. This study gives a comprehensive review of the heat transfer during the charging and discharging of metal hydride tanks the thermal management system techniques used for metal hydride tanks and the studies on the thermal management of metal hydride tanks with material streams from the fuel cell and/or electrolyzers.
A Novel Approach for Quantifying Hydrogen Embrittlement Using Side-grooved CT Samples
Feb 2022
Publication
Aerospace parts made of high strength steels such as landing gears and helicopter transmissions are often electroplated to satisfy various engineering specifications. However plated parts are occasionnaly rejected because of hydrogen embrittlement and the industry has few means of evaluating quantitatively the actual damage caused by hydrogen. In the present article we developed a novel method to measure the stress intensity threshold for hydrogen embrittlement (Kth) in industrial plating conditions. The method consists in plating side-grooved CT samples in industrial plating baths and measuring Kth with an incremental step loading methodology. We validated the method with a benchmark case known to produce embrittlement (omitted post-plating bake) and we used the method on a test case for which the level of embrittlement was unknown (delayed bake). For the benchmark case we measured a Kth of 49.0 MPa m0.5 for non-baked samples. This value is significantly lower than the fracture toughness of the unplated material which is 63.8 MPa m0.5 . We conclude that this novel combination of geometry and test method is efficient in quantifying hydrogen embrittlement of samples plated in industrial conditions. For the test case the Kth are respectively 57.9 MPa m0.5 and 58.8 MPa m0.5 for samples baked 100 h and 4 h after plating. We conclude that delaying the post-plating bake does not cause hydrogen embrittlement in the studied conditions. Using a finite element hydrogen diffusion analysis we argue that the side grooves on CT samples increase the sensitivity to hydrogen embrittlement in comparison to smooth samples. In smooth samples a zone of plane stress at the surface of the specimen shields hydrogen from penetrating to the center of the specimen a phenomenon which is alleviated with machining side grooves.
Thermal Sprayed Protective Coatings for Bipolar Plates of Hydrogen Fuel Cells and Water Electrolysis Cells
Mar 2024
Publication
As one core component in hydrogen fuel cells and water electrolysis cells bipolar plates (BPs) perform multiple important functions such as separating the fuel and oxidant flow providing mechanical support conducting electricity and heat connecting the cell units into a stack etc. On the path toward commercialization the manufacturing costs of bipolar plates have to be substantially reduced by adopting low-cost and easy-to-process metallic materials (e.g. stainless steel aluminum or copper). However these materials are susceptible to electrochemical corrosion under harsh operating conditions resulting in long-term performance degradation. By means of advanced thermal spraying technologies protective coatings can be prepared on bipolar plates so as to inhibit oxidation and corrosion. This paper reviews several typical thermal spraying technologies including atmospheric plasma spraying (APS) vacuum plasma spraying (VPS) and high-velocity oxygen fuel (HVOF) spraying for preparing coatings of bipolar plates particularly emphasizing the effect of spraying processes on coating effectiveness. The performance of coatings relies not only on the materials as selected or designed but also on the composition and microstructure practically obtained in the spraying process. The temperature and velocity of in-flight particles have a significant impact on coating quality; therefore precise control over these factors is demanded.
Material Challenges and Hydrogen Embrittlement Assessment for Hydrogen Utilisation in Industrial Scale
Sep 2023
Publication
Hydrogen has been studied extensively as a potential enabler of the energy transition from fossil fuels to renewable sources. It promises a feasible decarbonisation route because it can act as an energy carrier a heat source or a chemical reactant in industrial processes. Hydrogen can be produced via renewable energy sources such as solar hydro or geothermic routes and is a more stable energy carrier than intermittent renewable sources. If hydrogen can be stored efficiently it could play a crucial role in decarbonising industries. For hydrogen to be successfully implemented in industrial systems its impact on infrastructure needs to be understood quantified and controlled. If hydrogen technology is to be economically feasible we need to investigate and understand the retrofitting of current industrial infrastructure. Currently there is a lack of comprehensive knowledge regarding alloys and components performance in long-term hydrogen-containing environments at industrial conditions associated with high-temperature hydrogen processing/production. This review summarises insights into the gaps in hydrogen embrittlement (HE) research that apply to high-temperature high-pressure systems in industrial processes and applications. It illustrates why it is still important to develop characterisation techniques and methods for hydrogen interaction with metals and surfaces under these conditions. The review also describes the implications of using hydrogen in large-scale industrial processes.
Underground Hydrogen Storage (UHS) in Natural Storage Sites: A Perspective of Subsurface Characterization and Monitoring
Jan 2024
Publication
With the long-standing efforts of green transition in our society underground hydrogen storage (UHS) has emerged as a viable solution to buffering seasonal fluctuations of renewable energy supplies and demands. Like operations in hydrocarbon production and geological CO2 storage a successful UHS project requires a good understanding of subsurface formations while having different operational objectives and practical challenges. Similar to the situations in hydrocarbon production and geological CO2 storage in UHS problems the information of subsurface formations at the field level cannot be obtained through direct measurements due to the resulting high costs. As such there is a need for subsurface characterization and monitoring at the field scale which uses a certain history matching algorithm to calibrate a numerical subsurface model based on available field data. Whereas subsurface characterization and monitoring have been widely used in hydrocarbon production activities for a better understanding of hydrocarbon reservoirs to the best of our knowledge at present it appears to be a relatively less touched area in UHS problems. This work aims to narrow this noticed gap and investigates the use of an ensemble-based workflow for subsurface characterization and monitoring in a 3D UHS case study. Numerical results in this case study indicate that the ensemble-based workflow works reasonably well while also identifying some particular challenges that would be relevant to real-world problems.
Recent Progress and Techno-economic Analysis of Liquid Organic Hydrogen Carriers for Australian Renewable Energy Export - A Critical Review
Jan 2024
Publication
Hydrogen as a primary carbon-free energy carrier is confronted by challenges in storage and transportation. However liquid organic hydrogen carriers (LOHCs) present a promising solution for storing and transporting hydrogen at ambient temperature and atmospheric pressure. Unlike circular energy carriers such as methanol ammonia and synthetic natural gas LOHCs do not produce by-products during hydrogen recovery. LOHCs only act as hydrogen carriers and the carriers can also be recycled for reuse. Although there are considerable advantages to LOHCs there are also some drawbacks especially relative to the energy consumption during the dehydrogenation step of the LOHC recycling. This review summarizes the recent progresses in LOHC technologies focusing on catalyst developments process and reactor designs applications and techno-economic assessments (TEA). LOHC technologies can potentially offer significant benefits to Australia especially in terms of hydrogen as an export commodity. LOHCs can help avoid capital costs associated with infrastructure such as transportation vessels while reducing hydrogen loss during transportation such as in the case of liquid hydrogen (LH2). Additionally it minimises CO2 emissions as observed in methane and methanol reforming. Thus it is essential to dedicate more efforts to explore and develop LOHC technologies in the Australian context.
Hydrogen Informed Gurson Model for Hydrogen Embrittlement Simulation
Jul 2019
Publication
Hydrogen-microvoid interactions were studied via unit cell analyses with different hydrogen concentrations. The absolute failure strain decreases with hydrogen concentration but the failure loci were found to follow the same trend dependent only on stress triaxiality in other words the effects of geometric constraint and hydrogen on failure are decoupled. Guided by the decoupling principle a hydrogen informed Gurson model is proposed. This model is the first practical hydrogen embrittlement simulation tool based on the hydrogen enhanced localized plasticity (HELP) mechanism. It introduces only one additional hydrogen related parameter into the Gurson model and is able to capture hydrogen enhanced internal necking failure of microvoids with accuracy; its parameter calibration procedure is straightforward and cost efficient for engineering purpose
An Improved State Machine-based Energy Management Strategy for Renewable Energy Microgrid with Hydrogen Storage System
Oct 2022
Publication
Renewable energy (solar and wind) sources have evolved dramatically in recent years around the globe primarily because they have the potential to generate environmentally friendly energy. However operating systems with high renewable energy penetration remain challenging due to the stochastic nature of these energy sources. To tackle these problems the authors propose a state machine-based energy management strategy combined with a hysteresis band control strategy for renewable energy hybrid microgrids that integrates hydrogen storage systems. By considering the power difference between the renewable energy source and the demand the battery’s state of charge and the hydrogen storage level the proposed energy management strategy can control the power of fuel cells electrolyzers and batteries in a microgrid and the power imported into/exported from the main grid. The results showed that the energy management strategy provides the following advantages: (1) the power supply and demand balance in the microgrid was balanced (2) the lifespans of the electrolyzer and fuel cell were extended and (3) the state of charge of the battery and the stored level of the hydrogen were appropriately ensured.
Recent Progress in Conducting Polymers for Hydrogen Storage and Fuel Cell Applications
Oct 2020
Publication
Hydrogen is a clean fuel and an abundant renewable energy resource. In recent years huge scientific attention has been invested to invent suitable materials for its safe storage. Conducting polymers has been extensively investigated as a potential hydrogen storage and fuel cell membrane due to the low cost ease of synthesis and processability to achieve the desired morphological and microstructural architecture ease of doping and composite formation chemical stability and functional properties. The review presents the recent progress in the direction of material selection modification to achieve appropriate morphology and adsorbent properties chemical and thermal stabilities. Polyaniline is the most explored material for hydrogen storage. Polypyrrole and polythiophene has also been explored to some extent. Activated carbons derived from conducting polymers have shown the highest specific surface area and significant storage. This review also covers recent advances in the field of proton conducting solid polymer electrolyte membranes in fuel cells application. This review focuses on the basic structure synthesis and working mechanisms of the polymer materials and critically discusses their relative merits.
Exploring Technological Solutions for Onboard Hydrogen Storage Systems Through a Heterogeneous Knowledge Network: From Current State to Future Research Opportunities
Jun 2022
Publication
With the imminent threat of the energy crises innovation in energy technologies is happening world-wide. The aim is to reduce our reliance on fossil fuels. Electric vehicles with fuel-cells that use hydrogen as an energy carrier are touted to be one of the most important potential replacements of the gasoline vehicle in both future transportation scenarios and emerging smart energy grids. However hydrogen storage is a major technical barrier that lies between where we are now and the mass application of hydrogen energy. Further exploration of onboard hydrogen storage systems (OHSS) is urgently needed and in this regard a comprehensive technology opportunity analysis will help. Hence with this research we drew on scientific papers and patents related to OHSS and developed a novel methodology for investigating the past present and future development trends in OHSS. Specifically we constructed a heterogeneous knowledge network using a unique multi-component structure with three core components: hydrogen carriers hydrogen storage materials and fuel cells. From this network we extracted both the developed and underdeveloped technological solutions in the field and applied a well-designed evaluation system and prediction model to score the future development potential of these technological solutions. What emerged was the most promising directions of research in the short medium and long term. The results show that our methodology can effectively identify technology opportunities in OHSS along with providing valuable decision support to researchers and enterprise managers associated with the development and application of OHSS.
CFD Thermo‑Hydraulic Evaluation of a Liquid Hydrogen Storage Tank with Different Insulation Thickness in a Small‑Scale Hydrogen Liquefier
Aug 2023
Publication
Accurate evaluation of thermo‑fluid dynamic characteristics in tanks is critically important for designing liquid hydrogen tanks for small‑scale hydrogen liquefiers to minimize heat leakage into the liquid and ullage. Due to the high costs most future liquid hydrogen storage tank designs will have to rely on predictive computational models for minimizing pressurization and heat leakage. Therefore in this study to improve the storage efficiency of a small‑scale hydrogen liquefier a three‑ dimensional CFD model that can predict the boil‑off rate and the thermo‑fluid characteristics due to heat penetration has been developed. The prediction performance and accuracy of the CFD model was validated based on comparisons between its results and previous experimental data and a good agreement was obtained. To evaluate the insulation performance of polyurethane foam with three different insulation thicknesses the pressure changes and thermo‑fluid characteristics in a partially liquid hydrogen tank subject to fixed ambient temperature and wind velocity were investigated nu‑ merically. It was confirmed that the numerical simulation results well describe not only the temporal variations in the thermal gradient due to coupling between the buoyance and convection but also the buoyancy‑driven turbulent flow characteristics inside liquid hydrogen storage tanks with differ‑ ent insulation thicknesses. In the future the numerical model developed in this study will be used for optimizing the insulation systems of storage tanks for small‑scale hydrogen liquefiers which is a cost‑effective and highly efficient approach.
An Insight into Underground Hydrogen Storage in Italy
Apr 2023
Publication
Hydrogen is a key energy carrier that could play a crucial role in the transition to a low-carbon economy. Hydrogen-related technologies are considered flexible solutions to support the large-scale implementation of intermittent energy supply from renewable sources by using renewable energy to generate green hydrogen during periods of low demand. Therefore a short-term increase in demand for hydrogen as an energy carrier and an increase in hydrogen production are expected to drive demand for large-scale storage facilities to ensure continuous availability. Owing to the large potential available storage space underground hydrogen storage offers a viable solution for the long-term storage of large amounts of energy. This study presents the results of a survey of potential underground hydrogen storage sites in Italy carried out within the H2020 EU Hystories “Hydrogen Storage In European Subsurface” project. The objective of this work was to clarify the feasibility of the implementation of large-scale storage of green hydrogen in depleted hydrocarbon fields and saline aquifers. By analysing publicly available data mainly well stratigraphy and logs we were able to identify onshore and offshore storage sites in Italy. The hydrogen storage capacity in depleted gas fields currently used for natural gas storage was estimated to be around 69.2 TWh.
Biological Hydrogen Methanation with Carbon Dioxide Utilization: Methanation Acting as Mediator in the Hydrogen Economy
May 2023
Publication
Hydrogen is one of the main energy carriers playing a prominent role in the future decarbonization of the economy. However several aspects regarding the transport and storage of this gas are challenging. The intermediary conversion of hydrogen into high-density energy molecules may be a crucial step until technological conditions are ready to attain a significant reduction in fossil fuel use in transport and the industrial sector. The process of transforming hydrogen into methane by anaerobic digestion is reviewed showing that this technology is a feasible option for facilitating hydrogen storage and transport. The manuscript focuses on the role of anaerobic digestion as a technology driver capable of fast adaptation to current energy needs. The use of thermophilic systems and reactors capable of increasing the contact between the H2 -fuel and liquid phase demonstrated outstanding capabilities attaining higher conversion rates and increasing methane productivity. Pressure is a relevant factor of the process allowing for better hydrogen solubility and setting the basis for considering feasible underground hydrogen storage concomitant with biological methanation. This feature may allow the integration of sequestered carbon dioxide as a relevant substrate.
Microfluidic Storage Capacity and Residual Trapping During Cyclic Injections: Implications for Underground Storage
Apr 2023
Publication
Long-term and large-scale H2 storage is vital for a sustainable H2 economy. Research in underground H2 storage (UHS) in porous media is emerging but the understanding of H2 reconnection and recovery mechanisms under cyclic loading is not yet adequate. This paper reports a qualitative and quantitative investigation of H2 reconnection and recovery mechanisms in repeated injection-withdrawal cycles. Here we use microfluidics to experimentally investigate up to 5 cycles of H2 injection and withdrawal under a range of injection rates at shallow reservoir storage conditions. We find that H2 storage capacities increase with increasing injection rate and range between ~10% and 60%. The residual H2 saturation is in the same range between cycles (30e40%) but its distribution in the pore space visually appears to be hysteretic. In most cases the residually trapped H2 reconnects in the subsequent injection cycle predominantly in proximity to the large pore clusters. Our results provide valuable experimental data to advance the understanding of multiple H2 injection cycles in UHS schemes.
A Techno-economic Study of the Strategy for Hydrogen Transport by Pipelines in Canada
Jan 2023
Publication
Hydrogen as a clean zero-emission energy fuel will play a critical role in energy transition and achievement of the net-zero target in 2050. Hydrogen delivery is integral to the entire value chain of a full-scale hydrogen economy. This work conducted a systematic review and analysis of various hydrogen transportation methods including truck tankers for liquid hydrogen tube trailers for gaseous hydrogen and pipelines by identifying and ranking the main properties and affecting factors associated with each method. It is found that pipelines especially the existing natural gas pipelines provide a more efficient and cheaper means to transport hydrogen over long distances. Analysis was further conducted on Canadian natural gas pipeline network which has been operating for safe effective and efficient energy transport over six decades. The established infrastructure along with the developed operating and management experiences and skillful manpower makes the existing pipelines the best option for transport of hydrogen in either blended or pure form in the country. The technical challenges in repurposing the existing natural gas pipelines for hydrogen service were discussed and further work was analyzed.
Linking Geological and Infrastructural Requirements for Large-scale Underground Hydrogen Storage in Germany
Jun 2023
Publication
Hydrogen storage might be key to the success of the hydrogen economy and hence the energy transition in Germany. One option for cost-effective storage of large quantities of hydrogen is the geological subsurface. However previous experience with underground hydrogen storage is restricted to salt caverns which are limited in size and space. In contrast pore storage facilities in aquifers -and/or depleted hydrocarbon reservoirs- could play a vital role in meeting base load needs due to their wide availability and large storage capacity but experiences are limited to past operations with hydrogen-bearing town gas. To overcome this barrier here we investigate hydrogen storage in porous storage systems in a two-step process: 1) First we investigate positive and cautionary indicators for safe operations of hydrogen storage in pore storage systems. 2) Second we estimate hydrogen storage capacities of pore storage systems in (current and decommissioned) underground natural gas storage systems and saline aquifers. Our systematic review highlights that optimal storage conditions in terms of energy content and hydrogen quality are found in sandstone reservoirs in absence of carbonate and iron bearing accessory minerals at a depth of approx. 1100 m and a temperature of at least 40°C. Porosity and permeability of the reservoir formation should be at least 20% and 5 × 10−13 m2 (~500 mD) respectively. In addition the pH of the brine should fall below 6 and the salinity should exceed 100 mg/L. Based on these estimates the total hydrogen storage capacity in underground natural gas storages is estimated to be up to 8 billion cubic meters or (0.72 Mt at STP) corresponding to 29 TWh of energy equivalent of hydrogen. Saline aquifers may offer additional storage capacities of 81.6–691.8 Mt of hydrogen which amounts to 3.2 to 27.3 PWh of energy equivalent of hydrogen the majority of which is located in the North German basin. Pore storage systems could therefore become a crucial element of the future German hydrogen infrastructure especially in regions with large industrial hydrogen (storage) demand and likely hydrogen imports via pipelines and ships.
A Review on Metal Hydride Materials for Hydrogen Storage
Jul 2023
Publication
To achieve the shift to renewable energies efficient energy storage is of the upmost importance. Hydrogen as a chemical energy storage represents a promising technology due to its high gravimetric energy density. However the most efficient form of hydrogen storage still remains an open question. Absorption-based storage of hydrogen in metal hydrides offers high volumetric energy densities as well as safety advantages. In this work technical economic and environmental aspects of different metal hydride materials are investigated. An overview of the material properties production methods as well as possibilities for enhancement of properties are presented. Furthermore impacts on material costs abundance of raw materials and dependency on imports are discussed. Advantages and disadvantages of selected materials are derived and may serve as a decision basis for material selection based on application. Further research on enhancement of material properties as well as on the system level is required for widespread application of metal hydrides.
Perspectives and Prospects of Underground Hydrogen Storage and Natural Hydrogen
Jun 2022
Publication
Hydrogen is considered the fuel of the future due to its cleaner nature compared to methane and gasoline. Therefore renewable hydrogen production technologies and long-term affordable and safe storage have recently attracted significant research interest. However natural underground hydrogen production and storage have received scant attention in the literature despite its great potential. As such the associated formation mechanisms geological locations and future applications remain relatively under-explored thereby requiring further investigation. In this review the global natural hydrogen formation along with reaction mechanisms (i.e. metamorphic processes pyritization and serpentinization reactions) as well as the suitable geological locations (i.e. ophiolites organic-rich sediments fault zones igneous rocks crystalline basements salt bearing strata and hydrocarbon-bearing basins) are discussed. Moreover the underground hydrogen storage mechanisms are detailed and compared with underground natural gas and CO2 storage. Techno-economic analyses of large-scale underground hydrogen storage are presented along with the current challenges and future directions.
A Comparative Study on Energy Efficiency of the Maritime Supply Chains for Liquefied Hydrogen, Ammonia, Methanol and Natural Gas
Jun 2023
Publication
To cope with climate change emerging fuels- hydrogen ammonia and methanol- have been proposed as promising energy carriers that will replace part of the liquefied natural gas (LNG) in future maritime scenarios. Energy efficiency is an important indicator for evaluating the system but the maritime supply system for emerging fuels has yet to be revealed. In this study the energy efficiency of the maritime supply chain of hydrogen ammonia methanol and natural gas is investigated considering processes including production storage loading transport and unloading. A sensitivity analysis of parameters such as ambient temperature storage time pipeline length and sailing time is also carried out. The results show that hydrogen (2.366%) has the highest daily boil-off gas (BOG) rate and wastes more energy than LNG (0.413%) with ammonia and methanol both being lower than LNG. The recycling of BOG is of great importance to the hydrogen supply chain. When produced from renewable energy sources methanol (98.02%) is the most energy efficient followed by ammonia with hydrogen being the least (89.10%). This assessment shows from an energy efficiency perspective that ammonia and methanol have the potential to replace LNG as the energy carrier of the future and that hydrogen requires efficient BOG handling systems to increase competitiveness. This study provides some inspirations for the design of global maritime supply systems for emerging fuels.
Assessing and Modelling Hydrogen Reactivity in Underground Hydrogen Storage: A Review and Models Simulating the Lobodice Town Gas Storage
Apr 2023
Publication
Underground Hydrogen storage (UHS) is a promising technology for safe storage of large quantities of hydrogen in daily to seasonal cycles depending on the consumption requirements. The development of UHS requires anticipating hydrogen behavior to prevent any unexpected economic or environmental impact. An open question is the hydrogen reactivity in underground porous media storages. Indeed there is no consensus on the effects or lack of geochemical reactions in UHS operations because of the strong coupling with the activity of microbes using hydrogen as electron donor during anaerobic reduction reactions. In this work we apply different geochemical models to abiotic conditions or including the catalytic effect of bacterial activity in methanogenesis acetogenesis and sulfate-reduction reactions. The models are applied to Lobodice town gas storage (Czech Republic) where a conversion of hydrogen to methane was measured during seasonal gas storage. Under abiotic conditions no reaction is simulated. When the classical thermodynamic approach for aqueous redox reactions is applied the simulated reactivity of hydrogen is too high. The proper way to simulate hydrogen reactivity must include a description of the kinetics of the aqueous redox reactions. Two models are applied to simulate the reactions of hydrogen observed at Lobodice gas storage. One modeling the microbial activity by applying energy threshold limitations and another where microbial activity follows a Monod-type rate law. After successfully calibrating the bio-geochemical models for hydrogen reactivity on existing gas storage data and constraining the conditions where microbial activity will inhibit or enhance hydrogen reactivity we now have a higher confidence in assessing the hydrogen reactivity in future UHS in aquifers or depleted reservoirs.
Research on Multi-market Strategies for Virtual Power Plants with Hydrogen Energy Storage
Oct 2023
Publication
As the main body of resource aggregation Virtual Power Plant (VPP) not only needs to participate in the external energy market but also needs to optimize the management of internal resources. Different from other energy storage hydrogen energy storage systems can participate in the hydrogen market in addition to assuming the backup supplementary function of electric energy. For the Virtual Power Plant Operator (VPPO) it needs to optimize the scheduling of internal resources and formulate bidding strategies for the electric-hydrogen market based on external market information. In this study a two-stage model is constructed considering the internal and external interaction mechanism. The first stage model optimizes the operation of renewable energy flexible load extraction storage and hydrogen energy storage system based on the complementary characteristics of internal resources; the second stage model optimizes the bidding strategy to maximize the total revenue of the electricity energy market auxiliary service market and hydrogen market. Finally a typical scenario is constructed and the rationality and effectiveness of the strategy are verified. The results show that the hybrid VPP with hydrogen storage has better economic benefits resource benefits and reliability.
Can Africa Serve Europe with Hydrogen Energy from Its Renewables?—Assessing the Economics of Shipping Hydrogen and Hydrogen Carriers to Europe from Different Parts of the Continent
Apr 2023
Publication
There exists no single optimal way for transporting hydrogen and other hydrogen carriers from one port to the other globally. Its delivery depends on several factors such as the quantity distance economics and the availability of the required infrastructure for its transportation. Europe has a strategy to invest in the production of green hydrogen in Africa to meet its needs. This study assessed the economic viability of shipping liquefied hydrogen (LH2 ) and hydrogen carriers to Germany from six African countries that have been identified as countries with great potential in the production of hydrogen. The results obtained suggest that the shipping of LH2 to Europe (Germany) will cost between 0.47 and 1.55 USD/kg H2 depending on the distance of travel for the ship. Similarly the transportation of hydrogen carriers could range from 0.19 to 0.55 USD/kg H2 for ammonia 0.25 to 0.77 USD/kg H2 for LNG 0.24 to 0.73 USD/kg H2 for methanol and 0.43 to 1.28 USD/kg H2 for liquid organic hydrogen carriers (LOHCs). Ammonia was found to be the ideal hydrogen carrier since it recorded the least transportation cost. A sensitivity analysis conducted indicates that an increase in the economic life by 5 years could averagely decrease the cost of LNG by some 13.9% NH3 by 13.2% methanol by 7.9% LOHC by 8.03% and LH2 by 12.41% under a constant distance of 6470 nautical miles. The study concludes with a suggestion that if both foreign and local participation in the development of the hydrogen market is increased in Africa the continent could supply LH2 and other hydrogen carriers to Europe at a cheaper price using clean fuel.
Recent Advances of Metal Borohydrides for Hydrogen Storage
Aug 2022
Publication
Hydrogen energy is an excellent carrier for connecting various renewable energy sources and has many advantages. However hydrogen is flammable and explosive and its density is low and easy to escape which brings inconvenience to the storage and transportation of hydrogen. Therefore hydrogen storage technology has become one of the key steps in the application of hydrogen energy. Solid-state hydrogen storage method has a very high volumetric hydrogen density compared to the traditional compressed hydrogen method. The main issue of solid-state hydrogen storage method is the development of advanced hydrogen storage materials. Metal borohydrides have very high hydrogen density and have received much attention over the past two decades. However high hydrogen sorption temperature slow kinetics and poor reversibility still severely restrict its practical applications. This paper mainly discusses the research progress and problems to be solved of metal borohydride hydrogen storage materials for solid-state hydrogen storage.
Underground Hydrogen Storage to Balance Seasonal Variations in Energy Demand: Impact of Well Configuration on Storage Performance in Deep Saline Aquifers
Mar 2023
Publication
Grid-scale underground hydrogen storage (UHS) is essential for the decarbonization of energy supply systems on the path towards a zero-emissions future. This study presents the feasibility of UHS in an actual saline aquifer with a typical dome-shaped anticline structure to balance the potential seasonal mismatches between energy supply and demand in the UK domestic heating sector. As a main requirement for UHS in saline aquifers we investigate the role of well configuration design in enhancing storage performance in the selected site via numerical simulation. The results demonstrate that the efficiency of cyclic hydrogen recovery can reach around 70% in the short term without the need for upfront cushion gas injection. Storage capacity and deliverability increase in successive storage cycles for all scenarios with the co-production of water from the aquifer having a minimal impact on the efficiency of hydrogen recovery. Storage capacity and deliverability also increase when additional wells are added to the storage site; however the distance between wells can strongly influence this effect. For optimum well spacing in a multi-well storage scenario within a dome-shaped anticline structure it is essential to attain an efficient balance between well pressure interference effects at short well distances and the gas uprising phenomenon at large distances. Overall the findings obtained and the approach described can provide effective technical guidelines pertaining to the design and optimization of hydrogen storage operations in deep saline aquifers.
Mineral Reactions in the Geological Underground Induced by H2 and CO2 Injections
Dec 2014
Publication
The R&D project H2STORE is part of the German program to reduce environmental pollution by energy production and in saving fossil natural resources. Thereby physico-chemical processes in the CO2-H2 system by organic and inorganic reactions receive increasing attention. In H2STORE siliciclastic reservoirs and their caprocks from 25 well sites in Germany and Austria are investigated by different analytical methods before and after H2/CO2 batch experiments under sample specific reservoir conditions (p T XFluid). Mineral dissolution precipitation and their impact on reservoir quality (poro-perm fluid pathways) and on the generation of methane by microbial metabolism triggered by CO2/H2 exposure are studied.
Model to Inform the Expansion of Hydrogen Distribution Infrastructure
Jul 2023
Publication
A growing hydrogen economy requires new hydrogen distribution infrastructure to link geographically distributed hubs of supply and demand. The Hydrogen Optimization with Deployment of Infrastructure (HOwDI) Model helps meet this requirement. The model is a spatially resolved optimization framework that determines location-specific hydrogen production and distribution infrastructure to cost-optimally meet a specified location-based demand. While these results are useful in understanding hydrogen infrastructure development there is uncertainty in some costs that the model uses for inputs. Thus the project team took the modeling effort a step further and developed a Monte Carlo methodology to help manage uncertainties. Seven scenarios were run using existing infrastructure and new demand in Texas exploring different policy and tax approaches. The inclusion of tax credits increased the percentage of runs that could deliver hydrogen at <$4/kg from 31% to 77% and decreased the average dispensed cost from $4.35/kg to $3.55/kg. However even with tax credits there are still some runs where unabated SMR is deployed to meet new demand as the low-carbon production options are not competitive. Every scenario except for the zero-carbon scenario (without tax credits) resulted in at least 20% of the runs meeting the $4/kg dispensed fuel cost target. This indicates that multiple pathways exist to deliver $4/kg hydrogen.
Hydrogen Quality in Used Natual Gas Pipelines: An Experimental Investigation of Contaminants According to ISO 14687:2019 Standard
Sep 2023
Publication
The transport of hydrogen in used natural gas pipelines is a strategic key element of a pan-European hydrogen infrastructure. At the same time accurate knowledge of the hydrogen quality is essential in order to be able to address a wide application range. Therefore an experimental investigation was carried out to find out which contaminants enter into the hydrogen from the used natural gas pipelines. Pipeline elements from the high pressure gas grid of Austria were exposed to hydrogen. Steel pipelines built between 1960 and 2018 which were operated with odorised and pure natural gas were examined. The hydrogen was analysed according to requirements of ISO14687: 2019 Grade D measurement standard. The results show that based on age odorization and sediments different contimenants are introduced. Odorants hydrocarbons but also sulphur compounds ammonia and halogenated hydrogen compounds were identified. Sediments are identified as the main source of impurities. However the concentrations of the introduced contaminants were low (6 nmol/mol to 10 μmol/mol). Quality monitoring with a wide range of detection options for different components (sulphur halogenated compounds hydrocarbons ammonia and atmospheric components) is crucial for real operation. The authors deduce that a Grade A hydrogen quality can be safely achieved in real operation.
Battery and Hydrogen Energy Storage Control in a Smart Energy Network with Flexible Energy Demand Using Deep Reinforcement Learning
Sep 2023
Publication
Smart energy networks provide an effective means to accommodate high penetrations of variable renewable energy sources like solar and wind which are key for the deep decarbonisation of energy production. However given the variability of the renewables as well as the energy demand it is imperative to develop effective control and energy storage schemes to manage the variable energy generation and achieve desired system economics and environmental goals. In this paper we introduce a hybrid energy storage system composed of battery and hydrogen energy storage to handle the uncertainties related to electricity prices renewable energy production and consumption. We aim to improve renewable energy utilisation and minimise energy costs and carbon emissions while ensuring energy reliability and stability within the network. To achieve this we propose a multi-agent deep deterministic policy gradient approach which is a deep reinforcement learning-based control strategy to optimise the scheduling of the hybrid energy storage system and energy demand in real time. The proposed approach is model-free and does not require explicit knowledge and rigorous mathematical models of the smart energy network environment. Simulation results based on real-world data show that (i) integration and optimised operation of the hybrid energy storage system and energy demand reduce carbon emissions by 78.69% improve cost savings by 23.5% and improve renewable energy utilisation by over 13.2% compared to other baseline models; and (ii) the proposed algorithm outperforms the state-of-the-art self-learning algorithms like the deep-Q network.
Assessing the Pressure Losses during Hydrogen Transport in the Current Natural Gas Infrastructure Using Numerical Modelling
May 2023
Publication
The UK government aims to transition its modern natural gas infrastructure towards Hydrogen by 2035. Since hydrogen is a much lighter gas than methane it is important to understand the change in parameters when transporting it. While most modern work in this topic looks at the transport of hydrogen-methane mixtures this work focuses on pure hydrogen transport. The aim of this paper is to highlight the change in gas distribution parameters when natural gas is replaced by hydrogen in the existing infrastructure. This study uses analytical models and computational models to compare the flow of hydrogen and methane in a pipe based on pressure loss. The Darcy-Weisbach and Colebrook-White equations were used for the analytical models and the k- ε model was used for the computational approach. The variables considered in the comparison were the pipe material (X52 Steel and MDPE) and pipe diameters (0.01m–1m). It was observed that hydrogen had to be transported 250–270% the velocity of methane to replicate flow for a fixed length of pipe. Furthermore it was noted that MDPE pipes has 2–31% lower pressure losses compared to X52 steel for all diameters when transporting hydrogen at a high velocity. Lastly it was noted that the analytical model and computational model were in agreement with 1–5% error in their findings.
Large-scale Underground Hydrogen Storage: Integrated Modeling of a Reservoir-wellbore System
Jan 2023
Publication
Underground Hydrogen Storage (UHS) has received significant attention over the past few years as hydrogen seems well-suited for adjusting seasonal energy gaps. We present an integrated reservoir-well model for “Viking A00 the depleted gas field in the North Sea as a potential site for UHS. Our findings show that utilizing the integrated model results in more reasonable predictions as the gas composition changes over time. Sensitivity analyses show that the lighter the cushion gas the more production can be obtained. However the purity of the produced hydrogen will be affected to some extent which can be enhanced by increasing the fill-up period and the injection rate. The results also show that even though hydrogen diffuses into the reservoir and mixes up with the native fluids (mainly methane) the impact of hydrogen diffusion is marginal. All these factors will potentially influence the project's economics.
Benchmark of J55 and X56 Steels on Cracking and Corrosion Effects Under Hydrogen Salt Cavern Boundary Conditions
Feb 2024
Publication
Salt caverns have great potential to store relevant amounts of hydrogen as part of the energy transition. However the durability and suitability of commonly used steels for piping in hydrogen salt caverns is still under research. In this work aging effects focusing on corrosion and cracking patterns of casing steel API 5CT J55 and “H2ready” pipeline steel API 5L X56 were investigated with scanning electron microscopy and energy dispersive X-ray spectroscopy after accelerated stress tests with pressure/temperature cycling under hydrogen salt cavern-like conditions. Compared to dry conditions significant more corrosion by presence of salt ions was detected. However compared to X56 only for J55 an intensification of corrosion and cracking at the surface due to hydrogen atmosphere was revealed. Pronounced surface cracks were observed for J55 over the entire samples. Overall the results strongly suggest that X56 is more resistant than J55 under the conditions of a hydrogen salt cavern.
Hydrogen Storage for a Net-zero Carbon Future
Apr 2023
Publication
If a hydrogen economy is to become a reality along with efficient and decarbonized production and adequate transportation infrastructure deployment of suitable hydrogen storage facilities will be crucial. This is because due to various technical and economic reasons there is a serious possibility of an imbalance between hydrogen supply and demand. Hydrogen storage could also be pivotal in promoting renewable energy sources and facilitating the decarbonization process by providing long duration storage options which other forms of energy storage such as batteries with capacity limitations or pumped hydro with geographical limitations cannot meet. However hydrogen is not the easiest substance to store and handle. Under ambient conditions the extremely low volumetric energy density of hydrogen does not allow for its efficient and economic storage which means it needs to be compressed liquefied or converted into other substances that are easier to handle and store. Currently there are different hydrogen storage solutions at varying levels of technology market and commercial readiness with different applications depending on the circumstances. This paper evaluates the relative merits and techno-economic features of major types of hydrogen storage options: (i) pure hydrogen storage (ii) synthetic hydrocarbons (iii) chemical hydrides (iv) liquid organic hydrogen carriers (v) metal hydrides and (vi) porous materials. The paper also discusses the main barriers to investment in hydrogen storage and highlights key features of a viable business model in particular the policy and regulatory framework needed to address the primary risks to which potential hydrogen storage investors are exposed.
A Review on the Factors of Liner Collapse in Type IV Hydrogen Storage Vessels
Sep 2023
Publication
The on-board hydrogen storage of mobile applications is a key area of global industrial transformation to hydrogen technology. The research work provides an overview about the principle of hydrogen fuel cell vehicles with a focus on the widespread on-board hydrogen storage technologies. In this work type IV composite pressure vessels in particular are reviewed. The key challenges of polymeric liners are deeply investigated and liner collapse was identified as a critical failure of type IV vessels. Different factors of liner collapse were categorized and relevant material properties - such as permeability physical characteristics and surface properties - were explained in more detail to lay the foundation for further research on high barrier durable polymeric liner materials.
Hydrogen Embrittlement Characteristics in Cold-drawn High-strength Stainless Steel Wires
Mar 2023
Publication
Hydrogen uptake and embrittlement characteristics of a cold-drawn austenitic stainless steel wire were investigated. Slow strain rate testing and fracture surface analysis were applied to determine the hydrogen embrittlement resistance providing an apparent decrease in resistance to hydrogen embrittlement for a 50% degree of cold deformation. The hydrogen content was assessed by thermal desorption and laser-induced breakdown spectroscopy establishing a correlation between the total absorbed hydrogen and the intensity of near-surface hydrogen. The sub-surface hydrogen content of the hot-rolled specimen was determined to be 791 wt.ppm.
No more items...