Germany
Challenges of Industrial-Scale Testing Infrastructure for Green Hydrogen Technologies
Apr 2023
Publication
Green hydrogen is set to become the energy carrier of the future provided that production technologies such as electrolysis and solar water splitting can be scaled to global dimensions. Testing these hydrogen technologies on the MW scale requires the development of dedicated new test facilities for which there is no precedent. This perspective highlights the challenges to be met on the path to implementing a test facility for large-scale water electrolysis photoelectrochemical and photocatalytic water splitting and aims to serve as a much-needed blueprint for future test facilities based on the authors’ own experience in establishing the Hydrogen Lab Leuna. Key aspects to be considered are the electricity and utility requirements of the devices under testing the analysis of the produced H2 and O2 and the safety regulations for handling large quantities of H2 . Choosing the right location is crucial not only for meeting these device requirements but also for improving financial viability through supplying affordable electricity and providing a remunerated H2 sink to offset the testing costs. Due to their lower TRL and requirement for a light source large-scale photocatalysis and photoelectrochemistry testing are less developed and the requirements are currently less predictable.
Just Energy Transition: Learning from the Past for a More Just and Sustainable Hydrogen Transition in West Africa
Dec 2022
Publication
The rising demand for energy and the aim of moving away from fossil fuels and to low-carbon power have led many countries to move to alternative sources including solar energy wind geothermal energy biomass and hydrogen. Hydrogen is often considered a “missing link” in guaranteeing the energy transition providing storage and covering the volatility and intermittency of renewable energy generation. However due to potential injustice with regard to the distribution of risks benefits and costs (i.e. in regard to competing for land use) the large-scale deployment of hydrogen is a contested policy issue. This paper draws from a historical analysis of past energy projects to contribute to a more informed policy-making process toward a more just transition to the hydrogen economy. We perform a systematic literature review to identify relevant conflict factors that can influence the outcome of hydrogen energy transition projects in selected Economic Community of West African States countries namely Nigeria and Mali. To better address potential challenges policymakers must not only facilitate technology development access and market structures for hydrogen energy policies but also focus on energy access to affected communities. Further research should monitor hydrogen implementation with a special focus on societal impacts in producing countries.
Towards a Low-Carbon Society via Hydrogen and Carbon Capture and Storage: Social Acceptance from a Stakeholder Perspective
Apr 2020
Publication
Transformation concepts towards a low-carbon society often require new technology and infrastructure that evoke protests in the population. Therefore it is crucial to understand positions and conflicts in society to achieve social acceptance. This paper analyses these positions using the example of implementing hydrogen and carbon capture and storage infrastructure to decarbonise the German energy system. The empirical basis of the study are explorative stakeholder interviews which were conducted with experts from politics economics civil society and science and analysed within a discursive and attitudinal framework using qualitative content analysis. These stakeholder positions are assumed to represent dominant social perceptions and reflect chances and risks for acceptance. The results indicate different positions while pursuing the common goal of addressing climate change. The general conflict concerns strategies towards a low-carbon society especially the speed of phasing-out fossil energies. Regarding the combination of hydrogen and carbon capture and storage as instrument in the context of the energy transition the stakeholder interviews indicate controversial as well as consensual perceptions. The assessments range from rejection to deeming it absolutely necessary. Controversial argumentations refer to security of supply competitiveness and environmental protection. In contrast consensus can be reached by balancing ecological and economic arguments e.g. by linking hydrogen technologies with renewable and fossil energy sources or by limiting the use of carbon capture and storage only to certain applications (industry bioenergy). In further decisions this balancing of arguments combined with openness of technology transparency of information and citizen participation need to be considered to achieve broad acceptance.
Multi-Objective Optimization-Based Health-Conscious Predictive Energy Management Strategy for Fuel Cell Hybrid Electric Vehicles
Feb 2022
Publication
The Energy Management Strategy (EMS) in Fuel Cell Hybrid Electric Vehicles (FCHEVs) is the key part to enhance optimal power distribution. Indeed the most recent works are focusing on optimizing hydrogen consumption without taking into consideration the degradation of embedded energy sources. In order to overcome this lack of knowledge this paper describes a new health-conscious EMS algorithm based on Model Predictive Control (MPC) which aims to minimize the battery degradation to extend its lifetime. In this proposed algorithm the health-conscious EMS is normalized in order to address its multi-objective optimization. Then weighting factors are assigned in the objective function to minimize the selected criteria. Compared to most EMSs based on optimization techniques this proposed approach does not require any information about the speed profile which allows it to be used for real-time control of FCHEV. The achieved simulation results show that the proposed approach reduces the economic cost up to 50% for some speed profile keeping the battery pack in a safe range and significantly reducing energy sources degradation. The proposed health-conscious EMS has been validated experimentally and its online operation ability clearly highlighted on a PEMFC delivery postal vehicle.
Synergistic Value in Vertically Integrated Power-to-Gas Energy Systems
Oct 2019
Publication
In vertically integrated energy systems integration frequently entails operational gains that must be traded off against the requisite cost of capacity investments. In the context of the model analyzed in this study the operational gains are subject to inherent volatility in both the price and the output of the intermediate product transferred within the vertically integrated structure. Our model framework provides necessary and sufficient conditions for the value (NPV) of an integrated system to exceed the sum of two optimized subsystems on their own. We then calibrate the model in Germany and Texas for systems that combine wind energy with Power-to-Gas (PtG) facilities that produce hydrogen. Depending on the prices for hydrogen in different market segments we find that a synergistic investment value emerges in some settings. In the context of Texas for instance neither electricity generation from wind power nor hydrogen production from PtG is profitable on its own in the current market environment. Yet provided both subsystems are sized optimally in relative terms the attendant operational gains from vertical integration more than compensate for the stand-alone losses of the two subsystems.
Knowledge and Technology Transfer via Publications, Patents, Standards: Exploring the Hydrogen Technological Innovation System
Nov 2022
Publication
Clean technologies play a crucial role in reducing greenhouse gas emissions and protecting the climate. Hydrogen is a promising energy carrier and fuel that can be used in many applications. We explore the global hydrogen technological innovation system (TIS) by analyzing the three knowledge and technology transfer channels of publications patents and standards. Since the adoption of hydrogen technologies requires trust in their safety this study specifically also focuses on hydrogen safety. Our results show that general and hydrogen safety research has increased significantly while patenting experienced stagnation. An analysis of the non-patent literature in safety patents shows little recognition of scientific publications. Similarly publications are under-represented in the analyzed 75 international hydrogen and fuel cell standards. This limited transfer of knowledge from published research to standards points to the necessity for greater involvement of researchers in standardization. We further derive implications for the hydrogen TIS and recommendations for a better and more impactful alignment of the three transfer channels.
Artificial Intelligence/Machine Learning in Energy Management Systems, Control, and Optimization of Hydrogen Fuel Cell Vehicles
Mar 2023
Publication
Environmental emissions global warming and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand there has been significant progress in artificial intelligence machine learning and designing data-driven intelligent controllers. These techniques have found much attention within the community and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction control energy management and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve classify and compare and future trends and directions for sustainability are discussed.
How to Reduce the Greenhouse Gas Emissions and Air Pollution Caused by Light and Heavy Duty Vehicles with Battery-electric, Fuel Cell-electric and Catenary Trucks
Mar 2021
Publication
The reduction of greenhouse gas emissions is one of the greatest global challenges through 2050. Besides greenhouse gas emissions air pollution such as nitrogen oxide and particulate matter emissions has gained increasing attention in agglomerated areas with transport vehicles being one of the main sources thereof. Alternative fuels that fulfill the greenhouse gas reduction goals also offer the possibility of solving the challenge of rising urban pollution. This work focuses on the electric drive option for heavy and light duty vehicle freight transport. In this study fuel cell-electric vehicles battery-electric vehicles and overhead catenary line trucks were investigated taking a closer look at their potential to reduce greenhouse gas emissions and air pollution and also considering the investment and operating costs of the required infrastructure. This work was conducted using a bottom-up transport model for the federal state of North Rhine-Westphalia in Germany. Two scenarios for reducing these emissions were analyzed at a spatial level. In the first of these selected federal highways with the highest traffic volume were equipped with overhead catenary lines for the operation of diesel-hybrid overhead trucks on them. For the second spatial scenario the representative urban area of the city of Cologne was investigated in terms of air pollution shifting articulated trucks to diesel-hybrid overhead trucks and rigid trucks trailer trucks and light duty vehicles to battery-electric or fuel cell-electric drives. For the economic analysis the building up of a hydrogen infrastructure in the cases of articulated trucks and all heavy duty vehicles were also taken into account. The results showed that diesel-hybrid overhead trucks are only a cost-efficient solution for highways with high traffic volume whereas battery overhead trucks have a high uncertainty in terms of costs and technical feasibility. In general the broad range of costs for battery overhead trucks makes them competitive with fuel cell-electric trucks. Articulated trucks have the highest potential to be operated as overhead trucks. However the results indicated that air pollution is only partially reduced by switching conventional articulated trucks to electric drive models. The overall results show that a comprehensive approach such as fuel cell-electric drives for all trucks would most likely be more beneficial.
Efficiency and Optimal Load Capacity of E-Fuel-Based Energy Storage Systems
Apr 2023
Publication
This work evaluates the effectiveness of chemical-based solutions for storing large amounts of renewable electricity. Four “Power-to-X-to-Power” pathways are examined comprising hydrogen methane methanol and ammonia as energy carriers. The pathways are assessed using a model scenario where they are produced with electricity from an onshore wind farm stored in suitable facilities and then reconverted to electricity to meet the energy demand of a chemical site. An energy management and storage capacity estimation tool is used to calculate the annual load coverage resulting from each pathway. All four pathways offer a significant increase in load coverage compared to a scenario without storage solution (56.19%). The hydrogen-based pathway has the highest load coverage (71.88%) and round-trip efficiency (36.93%) followed by the ammonia-based (69.62% 31.37%) methanol-based (67.85% 27.00%) and methane-based (67.64% 26.47% respectively) pathways. The substantially larger storage capacity required for gaseous energy carriers to ensure a steady supply to the consumer could be a decisive factor. The hydrogen pathway requires a storage volume up to 10.93 times larger than ammonia and 16.87 times larger than methanol. Notably ammonia and methanol whose load coverages are only 2.26 and 4.03 percentage points lower than that of hydrogen offer the possibility of implementing site-specific storage solutions avoiding potential bottlenecks due to limited pipeline and cavern capacities.
Towards Climate-neutral Aviation: Assessment of Maintenance Requirements for Airborne Hydrogen Storage and Distribution Systems
Apr 2023
Publication
Airlines are faced with the challenge of reducing their environmental footprint in an effort to push for climate-neutral initiatives that comply with international regulations. In the past the aviation industry has followed the approach of incremental improvement of fuel efficiency while simultaneously experiencing significant growth in annual air traffic. With the increase in air traffic negating any reduction in Greenhouse Gas (GHG) emissions more disruptive technologies such as hydrogen-based onboard power generation are required to reduce the environmental impact of airline operations. However despite initial euphoria and first conceptual studies for hydrogen-powered aircraft several decades ago there still has been no mass adoption to this day. Besides the challenges of a suitable ground infrastructure this can partly be attributed to uncertainties with the associated maintenance requirements and the expected operating costs to demonstrate the economic viability of this technology. With this study we address this knowledge gap by estimating changes towards scheduled maintenance activities for an airborne hydrogen storage and distribution system. In particular we develop a detailed system design for a hydrogen-powered fuel-cell-based auxiliary power generation and perform a comparative analysis with an Airbus A320 legacy system. That analysis allows us to (a) identify changes for the expected maintenance effort to enhance subsequent techno-economic assessments (b) identify implications of specific design assumptions with corresponding maintenance activities while ensuring regulatory compliance and (c) describe the impact on the resulting task execution. The thoroughly examined interactions between system design and subsequent maintenance requirements of this study can support practitioners in the development of prospective hydrogen-powered aircraft. In particular it allows the inclusion of maintenance implications in early design stages of corresponding system architectures. Furthermore since the presented methodology is transferable to different design solutions it provides a blueprint for alternative operating concepts such as the complete substitution of kerosene by hydrogen to power the main engines.
How to Make Climate-neutral Aviation Fly
Jul 2023
Publication
The European aviation sector must substantially reduce climate impacts to reach net-zero goals. This reduction however must not be limited to flight CO2 emissions since such a narrow focus leaves up to 80% of climate impacts unaccounted for. Based on rigorous life-cycle assessment and a time-dependent quantification of non-CO2 climate impacts here we show that from a technological standpoint using electricity-based synthetic jet fuels and compensating climate impacts via direct air carbon capture and storage (DACCS) can enable climate-neutral aviation. However with a continuous increase in air traffic synthetic jet fuel produced with electricity from renewables would exert excessive pressure on economic and natural resources. Alternatively compensating climate impacts of fossil jet fuel via DACCS would require massive CO2 storage volumes and prolong dependence on fossil fuels. Here we demonstrate that a European climate-neutral aviation will fly if air traffic is reduced to limit the scale of the climate impacts to mitigate.
Techno-economic Assessment of Long-distance Supply Chains of Energy Carriers: Comparing Hydrogen and Iron for Carbon-free Electricity Generation
Mar 2023
Publication
The effective usage of renewable energy sources requires ways of storage and delivery to balance energy demand and availability divergences. Carbon-free chemical energy carriers are proposed solutions converting clean electricity into stable media for storage long-distance energy trade and on-demand electricity generation. Among them hydrogen (H2) is noteworthy being the subject of significant investment and research. Metal fuels such as iron (Fe) represent another promising solution for a clean energy supply but establishing an interconnected ecosystem still requires considerable research and development. This work proposes a model to assess the supply chain characteristics of hydrogen and iron as clean carbon-free energy carriers and then examines case studies of possible trade routes between the potential energy exporters Morocco Saudi Arabia and Australia and the energy importers Germany and Japan. The work comprises the assessment of economic (levelized cost of electricity - LCOE) energetic (thermodynamic efficiency) and environmental (CO2 emissions) aspects which are quantified by the comprehensive model accounting for the most critical processes in the supply chain. The assessment is complemented by sensitivity and uncertainty analyses to identify the main drivers for energy costs. Iron is shown to be lower-cost and more efficient to transport in longer routes and for long-term storage but potentially more expensive and less efficient than H2 to produce and convert. Uncertainties related to the supply chain specifications and the sensitivity to the used variables indicate that the path to viable energy carriers fundamentally depends on efficient synthesis conversion storage and transport. A break-even analysis demonstrated that clean energy carriers could be competitive with conventional energy carriers at low renewable energy prices while carbon taxes might be needed to level the playing field. Thereby green iron shows potential to become an important energy carrier for long-distance trade in a globalized clean energy market.
What is Stored, Why, and How? Mental Models, Knowledge, and Public Acceptance of Hydrogen Storage
Nov 2016
Publication
Although electricity storage plays a decisive role for the German “Energiewende” and it has become evident that the successful diffusion of technologies is not only a question of technical feasibility but also of social acceptance research on electricity storage technologies from a social science point of view is still scarce. This study therefore empirically explores laypersons’ mindsets and knowledge related to storage technologies focusing on hydrogen. While the results indicate overall supportive attitudes and trust in hydrogen storage some misconceptions a lack of information as well as concerns were identified which should be addressed in future communication concepts.
Investigation of Different Load Characteristics, Component Dimensioning, and System Scaling for the Optimized Design of a Hybrid Hydrogen-Based PV Energy System
Jul 2023
Publication
The realization of a carbon-neutral civilization which has been set as a goal for the coming decades goes directly hand-in-hand with the need for an energy system based on renewable energies (REs). Due to the strong weather-related daily and seasonal fluctuations in supply of REs suitable energy storage devices must be included for such energy systems. For this purpose an energy system model featuring hybrid energy storage consisting of a hydrogen unit (for long-term storage) and a lithium-ion storage device (for short-term storage) was developed. With a proper design such a system can ensure a year-round energy supply by using electricity generated by photovoltaics (PVs). In the energy system that was investigated hydrogen (H2) was produced by using an electrolyser (ELY) with a PV surplus during the summer months and then stored in an H2 tank. During the winter due to the lack of PV power the H2 is converted back into electricity and heat by a fuel cell (FC). While the components of such a system are expensive a resource- and cost-efficient layout is important. For this purpose a Matlab/Simulink model that enabled an energy balance analysis and a component lifetime forecast was developed. With this model the results of extensive parameter studies allowed an optimized system layout to be created for specific applications. The parameter studies covered different focal points. Several ELY and FC layouts different load characteristics different system scales different weather conditions and different load levels—especially in winter with variations in heating demand—were investigated.
Hydrogen as Energy Carrier: Techno-economic Assessment of Decentralized Hydrogen Production in Germany
Jun 2021
Publication
Political and scientific discussions on changing German energy supply mix and challenges of such energy transition are already well established. At the supply level energy storage seems to be the biggest challenge ahead for such transition. Hydrogen could be one of the solutions for future energy transition if it is produced using renewable energy resources. In order to analyze the future role of hydrogen its economic performance analysis is inevitable. This has been done in this research for a case study site in Cologne. The potential of hydrogen production with the use of solar electricity powered electrolyzers (alkaline and proton exchange membrane (PEM)) has been analyzed. Both grid connected and off grid modes of solar hydrogen production are considered. Economic performance results are presented for six scenarios. Hydrogen produced with the grid connected solar photovoltaics system coupled with alkaline electrolyzers was found the cheapest with the levelized cost of hydrogen (LCOH) at 6.23 V/kg. These costs are comparable with the current hydrogen price at commercial refueling station in Cologne. On the other hand the LCOH of off grid systems with both alkaline and PEM electrolyzers is expensive as expected the most expensive LCOH among six scenarios reached to 57.61 V/kg.
Ammonia Decomposition in the Process Chain for a Renewable Hydrogen Supply
Jun 2022
Publication
This review article deals with the challenge to identify catalyst materials from literature studies for the ammonia decomposition reaction with potential for application in large-scale industrial processes. On the one hand the requirements on the catalyst are quite demanding. Of central importance are the conditions for the primary reaction that have to be met by the catalyst. Likewise the catalytic performance i.e. an ideally quantitative conversion and a high lifetime are critical as well as the consideration of requirements on the product properties in terms of pressure or by-products for potential follow-up processes in this case synthesis gas applications. On the other hand the evaluation of the multitude of literature studies poses difficulties due to significant varieties in catalytic testing protocols.
Green Hydrogen from Anion Exchange Membrane Water Electrolysis: A Review of Recent Developments in Critical Materials and Operating Conditions
Mar 2020
Publication
Hydrogen production using water electrolysers equipped with an anion exchange membrane (AEM) a pure water feed and cheap components such as platinum group metal-free catalysts and stainless steel bipolar plates (BPP) can challenge proton exchange membrane (PEM) electrolysis systems as the state of the art. For this to happen the performance of the AEM electrolyzer must match the compact design stability H2 purity and high current densities of PEM systems. Current research aims at bringing AEM water electrolysis technology to an advanced level in terms of electrolysis cell performance. Such technological advances must be accompanied by demonstration of the cost advantages of AEM systems. The current state of the art in AEM water electrolysis is defined by sporadic reports in the academic literature mostly dealing with catalyst or membrane development. The development of this technology requires a future roadmap for systematic development and commercialization of AEM systems and components. This will include basic and applied research technology development & integration and testing at a laboratory scale of small demonstration units (AEM electrolyzer shortstacks) that can be used to validate the technology (from TRL 2–3 currently to TRL 4–5). This review paper gathers together recent important research in critical materials development (catalysts membranes and MEAs) and operating conditions (electrolyte composition cell temperature performance achievements). The aim of this review is to identify the current level of materials development and where improvements are required in order to demonstrate the feasibility of the technology. Once the challenges of materials development are overcome AEM water electrolysis can drive the future use of hydrogen as an energy storage vector on a large scale (GW) especially in developing countries.
Hydrogen Technology Towards the Solution of Environment-Friendly New Energy Vehicles
Aug 2021
Publication
The popularity of climate neutral new energy vehicles for reduced emissions and improved air quality has been raising great attention for many years. World-wide a strong commitment continues to drive the demand for zero-emission through alternative energy sources and propulsion systems. Despite the fact that 71.27% of hydrogen is produced from natural gas green hydrogen is a promising clean way to contribute to and maintain a climate neutral ecosystem. Thereby reaching CO2 targets for 2030 and beyond requires cross-sectoral changes. However the strong motivation of governments for climate neutrality is challenging many sectors. One of them is the transport sector as it is challenged to find viable all-in solutions that satisfy social economic and sustainable requirements. Currently the use of new energy vehicles operating on green sustainable hydrogen technologies such as batteries or fuel cells has been the focus for reducing the mobility induced emissions. In Europe 50% of the total emissions result from mobility. The following article reviews the background ongoing challenges and potentials of new energy vehicles towards the development of an environmentally friendly hydrogen economy. A change management process mindset has been adapted to discuss the key scientific and commercial challenges for a successful transition.
Derivation and Validation of a Reference Data-based Real Gas Model for Hydrogen
Mar 2023
Publication
Hydrogen plays an important role for the decarbonization of the energy sector. In its gaseous form it is stored at pressures of up to 1000 bar at which real gas effects become relevant. To capture these effects in numerical simulations accurate real gas models are required. In this work new correlation equations for relevant hydrogen properties are developed based on the Reference Fluid Thermodynamic and Transport Properties Database (REFPROP). Within the regarded temperature (150e400 K) and pressure (0.1e1000 bar) range this approach yields a substantially improved accuracy compared to other databased correlations. Furthermore the developed equations are validated in a numerical simulation of a critical flow Venturi nozzle. The results are in much better accordance with experimental data compared to a cubic equation of state model. In addition the simulation is even slightly faster.
Review and Harmonization of the Life-Cycle Global Warming Impact of PV-Powered Hydrogen Production by Electrolysis
Sep 2021
Publication
This work presents a review of life-cycle assessment (LCA) studies of hydrogen electrolysis using power from photovoltaic (PV) systems. The paper discusses the assumptions strengths and weaknesses of 13 LCA studies and identifies the causes of the environmental impact. Differences in assumptions of system boundaries system sizes evaluation methods and functional units make it challenging to directly compare the Global Warming Potential (GWP) resulting from different studies. To simplify this process 13 selected LCA studies on PV-powered hydrogen production have been harmonized following a consistent framework described by this paper. The harmonized GWP values vary from 0.7 to 6.6 kg CO2-eq/kg H2 which can be considered a wide range. The maximum absolute difference between the original and harmonized GWP results of a study is 1.5 kg CO2-eq/kg H2. Yet even the highest GWP of this study is over four times lower than the GWP of grid-powered electrolysis in Germany. Due to the lack of transparency of most LCAs included in this review full identification of the sources of discrepancies (methods applied assumed production conditions) is not possible. Overall it can be concluded that the environmental impact of the electrolytic hydrogen production process is mainly caused by the GWP of the electricity supply. For future environmental impact studies on hydrogen production systems it is highly recommended to 1) divide the whole system into well-defined subsystems using compression as the final stage of the LCA and 2) to provide energy inputs/GWP results for the different subsystems.
Hybrid Energy System Model in Matlab/Simulink Based on Solar Energy, Lithium‐Ion Battery and Hydrogen
Mar 2022
Publication
In this work a model of an energy system based on photovoltaics as the main energy source and a hybrid energy storage consisting of a short‐term lithium‐ion battery and hydrogen as the long‐term storage facility is presented. The electrical and the heat energy circuits and resulting flows have been modelled. Therefore the waste heat produced by the electrolyser and the fuel cell have been considered and a heat pump was considered to cover the residual heat demand. The model is designed for the analysis of a whole year energy flow by using a time series of loads weather and heat profile as input. This paper provides the main set of equations to derive the component properties and describes the implementation into MATLAB/Simulink. The novel model was created for an energy flow simulation over one year. The results of the simulation have been verified by comparing them with well‐established simulation results from HOMER Energy. It turns out that the novel model is well suited for the analysis of the dynamic system behaviour. Moreover different characteristics to achieve an energy balance an ideal dimensioning for the particular use case and further research possibilities of hydrogen use in the residential sector are covered by the novel model.
Review of Power-to-X Demonstration Projects in Europe
Sep 2020
Publication
At the heart of most Power-to-X (PtX) concepts is the utilization of renewable electricity to produce hydrogen through the electrolysis of water. This hydrogen can be used directly as a final energy carrier or it can be converted into for example methane synthesis gas liquid fuels electricity or chemicals. Technical demonstration and systems integration are of major importance for integrating PtX into energy systems. As of June 2020 a total of 220 PtX research and demonstration projects in Europe have either been realized completed or are currently being planned. The central aim of this review is to identify and assess relevant projects in terms of their year of commissioning location electricity and carbon dioxide sources applied technologies for electrolysis capacity type of hydrogen post-processing and the targeted field of application. The latter aspect has changed over the years. At first the targeted field of application was fuel production for example for hydrogen buses combined heat and power generation and subsequent injection into the natural gas grid. Today alongside fuel production industrial applications are also important. Synthetic gaseous fuels are the focus of fuel production while liquid fuel production is severely under-represented. Solid oxide electrolyzer cells (SOECs) represent a very small proportion of projects compared to polymer electrolyte membranes (PEMs) and alkaline electrolyzers. This is also reflected by the difference in installed capacities. While alkaline electrolyzers are installed with capacities between 50 and 5000 kW (2019/20) and PEM electrolyzers between 100 and 6000 kW SOECs have a capacity of 150 kW. France and Germany are undertaking the biggest efforts to develop PtX technologies compared to other European countries. On the whole however activities have progressed at a considerably faster rate than had been predicted just a couple of years ago.
Hydrogenization of Underground Storage of Natural Gas
Aug 2015
Publication
The intermittent production of the renewable energy imposes the necessity to temporarily store it. Large amounts of exceeding electricity can be stored in geological strata in the form of hydrogen. The conversion of hydrogen to electricity and vice versa can be performed in electrolyzers and fuel elements by chemical methods. The nowadays technical solution accepted by the European industry consists of injecting small concentrations of hydrogen in the existing storages of natural gas. The progressive development of this technology will finally lead to the creation of underground storages of pure hydrogen. Due to the low viscosity and low density of hydrogen it is expected that the problem of an unstable displacement including viscous fingering and gravity overriding will be more pronounced. Additionally the injection of hydrogen in geological strata could encounter chemical reactivity induced by various species of microorganisms that consume hydrogen for their metabolism. One of the products of such reactions is methane produced from Sabatier reaction between H2 and CO2. Other hydrogenotrophic reactions could be caused by acetogenic archaea sulfate-reducing bacteria and iron-reducing bacteria. In the present paper a mathematical model is presented which is capable to reflect the coupled hydrodynamic and bio-chemical processes in UHS. The model has been numerically implemented by using the open source code DuMuX developed by the University of Stuttgart. The obtained bio-chemical version of DuMuX was used to model the evolution of a hypothetical underground storage of hydrogen. We have revealed that the behavior of an underground hydrogen storage is different than that of a natural gas storage. Both the hydrodynamic and the bio-chemical effects contribute to the different characteristics.
Nested Decomposition Approach for Dispatch Optimization of Large-Scale, Integrated Electricity, Methane and Hydrogen Infrastructures
Apr 2022
Publication
Energy system integration enables raising operational synergies by coupling the energy infrastructures for electricity methane and hydrogen. However this coupling reinforces the infrastructure interdependencies increasing the need for integrated modeling of these infrastructures. To analyze the cost-efficient sustainable and secure dispatch of applied large-scale energy infrastructures an extensive and non-linear optimization problem needs to be solved. This paper introduces a nested decomposition approach with three stages. The method enables an integrated and full-year consideration of large-scale multi-energy systems in hourly resolution taking into account physical laws of power flows in electricity and gas transmission systems as boundary conditions. For this purpose a zooming technique successively reduces the temporal scope while first increasing the spatial and last the technical resolution. A use case proves the applicability of the presented approach to large-scale energy systems. To this end the model is applied to an integrated European energy system model with a detailed focus on Germany in a challenging transport situation. The use case demonstrates the temporal regional and cross-sectoral interdependencies in the dispatch of integrated energy infrastructures and thus the benefits of the introduced approach.
Hydrogen Blowdown Release Experiments at Different Temperatures in the Discha-facility
Sep 2021
Publication
In this work experiments on horizontal hydrogen jet releases from a 2.815 dm³ volume tank to the ambience are described. For the main experimental series tank valve and release line were cooled down to a temperature of approx. 80 K in a bath of liquid nitrogen. As a reference similar experiments were also performed with the uncooled tank at ambient temperature. The releases were carried out through four nozzles with different circular orifice diameters from 0.5 to 4 mm and started from initial tank pressures from 0.5 to 20 MPa (rel.). During the releases pressures and temperatures inside the vessel as well as inside the release line were measured. Outside the nozzle further temperature and hydrogen concentration measurements were performed along and besides the jet axis. The electrostatic field builtup in the jet was monitored using two field meters in different distances from the release nozzle and optical observation via photo and video-cameras was performed for the visualization of the H2-jet via the BOS-method. The experiments were performed in the frame of the EU-funded project PRESHLY in which several tests of this program were selected for a comparative computational study the results of which will also be presented at this conference. So on the one hand the paper gives a comprehensive description of the facility on the other hands it also describes the experimental procedure and the main findings.
Shock Tube Experiments on Flame Propagation Regimes and Critical Conditions for Flame Acceleration and Detonation Transition for Hydrogen-air Mixtures at Cryogenic Temperatures
Sep 2021
Publication
A series of more than 100 experiments with hydrogen-air mixtures at cryogenic temperatures have been performed in a shock tube in the frame of the PRESLHY project. A wide range of hydrogen concentrations from 8 to 60%H2 in the shock tube of the length of 5 m and 50 mm id was tested at cryogenic temperatures from 80 to 130K at ambient pressure. Flame propagation regimes were investigated for all hydrogen compositions in the shock tube at three different blockage ratios (BR) 0 0.3 and 0.6 as a function of initial temperature. Pressure sensors and InGaAs-photodiodes have been applied to monitor the flame and shock propagation velocity of the process. The experiments at ambient pressure and temperature were conducted as the reference data for cryogenic experiments. A critical expansion ratio for an effective flame acceleration to the speed of sound was experimentally found at cryogenic temperatures. The detonability criterion for smooth and obstructed channels was used to evaluate the detonation cell sizes at cryogenic temperatures as well. The main peculiarities of cryogenic combustion with respect to the safety assessment were that the maximum combustion pressure was several times higher compared to ambient temperature and the run-up-distance to detonation was several times shorter independent of lower chemical reactivity at cryogenic conditions.
Water Electrolysis: From Textbook Knowledge to the Latest Scientific Strategies and Industrial Developments
May 2022
Publication
Replacing fossil fuels with energy sources and carriers that are sustainable environmentally benign and affordable is amongst the most pressing challenges for future socio-economic development. To that goal hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting if driven by green electricity would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first principles calculations and machine learning. In addition a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the ‘junctions’ between the field’s physical chemists materials scientists and engineers as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.
Power-to-Gas: Electrolysis and Methanation Status Review
Jun 2019
Publication
This review gives a worldwide overview on Power-to-Gas projects producing hydrogen or renewable substitute natural gas focusing projects in central Europe. It deepens and completes the content of previous reviews by including hitherto unreviewed projects and by combining project names with details such as plant location. It is based on data from 153 completed recent and planned projects since 1988 which were evaluated with regards to plant allocation installed power development plant size shares and amounts of hydrogen or substitute natural gas producing examinations and product utilization phases. Cost development for electrolysis and carbon dioxide methanation was analyzed and a projection until 2030 is given with an outlook to 2050.<br/>The results show substantial cost reductions for electrolysis as well as for methanation during the recent years and a further price decline to less than 500 euro per kilowatt electric power input for both technologies until 2050 is estimated if cost projection follows the current trend. Most of the projects examined are located in Germany Denmark the United States of America and Canada. Following an exponential global trend to increase installed power today's Power-to-Gas applications are operated at about 39 megawatt. Hydrogen and substitute natural gas were investigated on equal terms concerning the number of projects.
Investigation of an Intensified Thermo-Chemical Experimental Set-Up for Hydrogen Production from Biomass: Gasification Process Performance—Part I
Jun 2021
Publication
Biomass gasification for energy purposes has several advantages such as the mitigation of global warming and national energy independency. In the present work the data from an innovative and intensified steam/oxygen biomass gasification process integrating a gas filtration step directly inside the reactor are presented. The produced gas at the outlet of the 1 MWth gasification pilot plant was analysed in terms of its main gaseous products (hydrogen carbon monoxide carbon dioxide and methane) and contaminants. Experimental test sets were carried out at 0.25–0.28 Equivalence Ratio (ER) 0.4–0.5 Steam/Biomass (S/B) and 780–850 °C gasification temperature. Almond shells were selected as biomass feedstock and supplied to the reactor at approximately 120 and 150 kgdry/h. Based on the collected data the in-vessel filtration system showed a dust removal efficiency higher than 99%-wt. A gas yield of 1.2 Nm3dry/kgdaf and a producer gas with a dry composition of 27–33%v H2 23–29%v CO 31–36%v CO2 9–11%v CH4 and light hydrocarbons lower than 1%v were also observed. Correspondingly a Low Heating Value (LHV) of 10.3–10.9 MJ/Nm3dry and a cold gas efficiency (CGE) up to 75% were estimated. Overall the collected data allowed for the assessment of the preliminary performances of the intensified gasification process and provided the data to validate a simulative model developed through Aspen Plus software.
A Policy Review of Green Hydrogen Economy in Southern Africa
Nov 2021
Publication
Renewable energy and clean energy have been on the global agenda for energy transition for quite a long time but recently gained strong momentum especially with the anticipated depletion of fossil fuels alongside increasing environmental degradation from their exploitation and the changing climate caused by their excessive carbon emissions. Despite this Africa’s pursuit to transition to a green economy using renewable energy resources still faces constraints that hamper further development and commercialization. These may include socio-economic technical political financial and institutional policy framework barriers. Although hydrogen demand is still low in Southern Africa the region can meet the global demands for green hydrogen as a major supplier because of its enormous renewable energy resource-base. This article reviews existing renewable energy resources and hydrogen energy policies in the Southern African Development Community (SADC). The significance of this review is that it explores how clean energy technologies that utilize renewable energy resources address the United Nations sustainable development goals (UN SDGs) and identifies the hydrogen energy policy gaps. This review further presents policy options and recommends approaches to enhance hydrogen energy production and ramp the energy transition from a fossil fuel-based economy to a hydrogen energy-based economy in Southern Africa. Concisely the transition can be achieved if the existing hydrogen energy policy framework gap is narrowed by formulating policies that are specific to hydrogen development in each country with the associated economic benefits of hydrogen energy clearly outlined.
Cost Benefits of Optimizing Hydrogen Storage and Methanation Capacities for Power-to-Gas Plants in Dynamic Operation
Oct 2019
Publication
Power-to-Gas technologies offer a promising approach for converting renewable electricity into a molecular form (fuel) to serve the energy demands of non-electric energy applications in all end-use sectors. The technologies have been broadly developed and are at the edge of a mass roll-out. The barriers that Power-to-Gas faces are no longer technical but are foremost regulatory and economic. This study focuses on a Power-to-Gas pathway where electricity is first converted in a water electrolyzer into hydrogen which is then synthetized with carbon dioxide to produce synthetic natural gas. A key aspect of this pathway is that an intermittent electricity supply could be used which could reduce the amount of electricity curtailment from renewable energy generation. Interim storages would then be necessary to decouple the synthesized part from hydrogen production to enable (I) longer continuous operation cycles for the methanation reactor and (II) increased annual full-load hours leading to an overall reduction in gas production costs. This work optimizes a Power-to-Gas plant configuration with respect to the cost benefits using a Monte Carlo-based simulation tool. The results indicate potential cost reductions of up to 17% in synthetic natural gas production by implementing well-balanced components and interim storages. This study also evaluates three different power sources which differ greatly in their optimal system configuration. Results from time-resolved simulations and sensitivity analyses for different plant designs and electricity sources are discussed with respect to technical and economic implications so as to facilitate a plant design process for decision makers.
Numerical Simulations of Suppression Effect of Water Mist on Hydrogen Deflagration in Confined Spaces
Sep 2021
Publication
Hydrogen safety issues attract focuses increasingly as more and more hydrogen powered vehicles are going to be operated in traffic infrastructures of different kinds like tunnels. Due to the confinement feature of traffic tunnels hydrogen deflagration may pose a risk when a hydrogen leak event occurs in a tunnel e.g. failure of the hydrogen storage system caused by a car accident in a tunnel. A water injection system can be designed in tunnels as a mitigation measure to suppress the pressure and thermal loads of hydrogen combustion in accident scenarios. The COM3D is a fully verified three-dimensional finite-difference turbulent flow combustion code which models gas mixing hydrogen combustion and detonation in nuclear containment with mitigation device or other confined facilities like vacuum vessel of fusion and semi-confined hydrogen facilities in industry such as traffic tunnels hydrogen refueling station etc. Therefore by supporting of the European HyTunnel-CS project the COM3D is applied to simulate numerically the hydrogen deflagration accident in a tunnel model being suppressed by water mist injection. The suppression effect of water mist and the suppression mechanism is elaborated and discussed in the study.
Steel Manufacturing Clusters in a Hydrogen Economy – Simulation of Changes in Location and Vertical Integration of Steel Production in Northwestern Europe
Feb 2022
Publication
With the move to a hydrogen-based primary steel production envisioned for the near future in Europe existing regional industrial clusters loose major assets. Such a restructuring of industries may result in a new geographical distribution of the steel industry and also to another quality of vertical integration at sites. Both implications could turn out as drivers or barriers to invest in new technologies and are thus important in respect to vertical integration of sites and to regional policy. This paper describes an approach to model production stock invest for the steel industries in North-Western Europe. Current spatial structures are reproduced with capacity technical and energy efficiency data on the level of single facilities like blast furnaces. With the model developed both investments in specific technologies and at specific production sites can be modelled. The model is used to simulate different possible future scenarios. The case with a clear move to hydrogen-based production is compared to a reference scenario without technological shift. The scenarios show that existing trends like movement of production to the coast may be accelerated by the new technology but that sites in the hinterland can also adapt to a hydrogen economy. Possible effects of business cycles or a circular economy on regional value chains are explored with a Monte-Carlo analysis.
Economic Optima for Buffers in Direct Reduction Steelmaking Under Increasing Shares of Renewable Hydrogen
Oct 2021
Publication
While current climate targets demand substantial reductions in greenhouse gas (GHG) emissions the potentials to further reduce carbon dioxide emissions in traditional primary steel-making are limited. One possible solution that is receiving increasing attention is the direct reduction (DR) technology operated either with renewable hydrogen (H2) from electrolysis or with conventional natural gas (NG). DR technology makes it possible to decouple steel and hydrogen production by temporarily using overcapacities to produce and store intermediary products during periods of low renewable electricity prices or by switching between H2 and NG. This paper aims to explore the impact of this decoupling on overall costs and the corresponding dimensioning of production and storage capacities. An optimization model is developed to determine the least-cost operation based on perfect-foresight. This model can determine the minimum costs for optimal production and storage capacities under various assumptions considering fluctuating H2 and NG prices and increasing H2 shares. The model is applied to a case study for Germany and covers the current situation the medium term until 2030 and the long term until 2050. Under the assumptions made the role of using direct reduced iron (DRI) storage as a buffer seems less relevant. DRI mainly serves as long-term storage for several weeks similar to usual balancing storage capacities. Storing H2 on the contrary is used for short-term fluctuations and could balance H2 demand in the hourly range until 2050. From an economic perspective DRI production using NG tends to be cheaper than using H2 in the short term and potential savings from the flexible operation with storages are small at first. However in the long term until 2050 NG and H2 could achieve similar total costs if buffers are used. Otherwise temporarily occurring electricity price spikes imply substantial increases in total costs if high shares of H2 need to be achieved.
Investigation on Cooling Effect of Water Sprays on Tunnel Fires of Hydrogen
Sep 2021
Publication
As one of the most promising renewable green energies hydrogen power is a popularly accepted option to drive automobiles. Commercial application of fuel cell vehicles has been started since 2015. More and more hydrogen safety concerns have been considered for years. Tunnels are an important part of traffic infrastructure with a mostly confined feature. Hydrogen leak followed possibly by a hydrogen fire is a potential accident scenario which can be triggered trivially by a car accident while hydrogen powered vehicles operate in a tunnel. Water spray is recommended traditionally as a mitigation measure against tunnel fires. The interaction between water spray and hydrogen fire is studied in a way of numerical simulations. By using the computer program of Fire Dynamics Simulator (FDS) tunnel fires of released hydrogen in different scales are simulated coupled with water droplet injections featured in different droplet sizes or varying mass flow rates. The cooling effect of spray on hot gases of hydrogen fires is apparently observed in the simulations. However in some circumstance the turbulence intensified by the water injection can prompt hydrogen combustion which is a negative side-effect of the spray.
Towards the Efficient and Time-accurate Simulations of Early Stages of Industrial Explosions
Sep 2021
Publication
Combustion during a nuclear reactor accident can result in pressure loads that are potentially fatal for the structural integrity of the reactor containment or its safety equipment. Enabling efficient modelling of such safety-critical scenarios is the goal of ongoing work. In this paper attention is given to capturing early phases of flame propagation. Transient simulations that are not prohibitively expensive for use at industrial scale are required given that a typical flame propagation study takes a large number of simulation time steps to complete. An improved numerical method used in this work is based on explicit time integration by means of Strong Stability Preserving (SSP) Runge-Kutta schemes. These allow an increased time step size for a given level of accuracy—reducing the overall computational effort. Furthermore a wide range of flow conditions is encountered in analysis of accelerating flames: from incompressible to potentially supersonic. In contrast numerical schemes for spatial discretization would often prove lacking in either stability or accuracy outside the intended flow regime—with density-based schemes being traditionally designed and applied to compressible (Ma>0.3) flows. In the present work a formulation of an all-speed density-based numerical flux scheme is used for simulation of slow flames starting from ignition. Validation was carried out using experiments with spherical lean hydrogen flames at laboratory scale. Turbulence conditions in the experiments correspond to those that can arise in a nuclear reactor containment during an accident. Results show that the new numerical method has the potential to predict flame speed and pressure rise at a reduced computational effort.
Development of Hydrogen Storage Tank Systems Based on Complex Metal Hydrides
Sep 2015
Publication
This review describes recent research in the development of tank systems based on complex metal hydrides for thermolysis and hydrolysis. Commercial applications using complex metal hydrides are limited especially for thermolysis-based systems where so far only demonstration projects have been performed. Hydrolysis-based systems find their way in space naval military and defense applications due to their compatibility with proton exchange membrane (PEM) fuel cells. Tank design modeling and development for thermolysis and hydrolysis systems as well as commercial applications of hydrolysis systems are described in more detail in this review. For thermolysis mostly sodium aluminum hydride containing tanks were developed and only a few examples with nitrides ammonia borane and alane. For hydrolysis sodium borohydride was the preferred material whereas ammonia borane found less popularity. Recycling of the sodium borohydride spent fuel remains an important part for their commercial viability.
Flexible Electricity Use for Heating in Markets with Renewable Energy
Mar 2020
Publication
Using electricity for heating can contribute to decarbonization and provide flexibility to integrate variable renewable energy. We analyze the case of electric storage heaters in German 2030 scenarios with an open-source electricity sector model. We find that flexible electric heaters generally increase the use of generation technologies with low variable costs which are not necessarily renewables. Yet making customary night-time storage heaters temporally more flexible offers only moderate benefits because renewable availability during daytime is limited in the heating season. Respective investment costs accordingly have to be very low in order to realize total system cost benefits. As storage heaters feature only short-term heat storage they also cannot reconcile the seasonal mismatch of heat demand in winter and high renewable availability in summer. Future research should evaluate the benefits of longer-term heat storage.
A Review of the MSCA ITN ECOSTORE—Novel Complex Metal Hydrides for Efficient and Compact Storage of Renewable Energy as Hydrogen and Electricity
Mar 2020
Publication
Hydrogen as an energy carrier is very versatile in energy storage applications. Developments in novel sustainable technologies towards a CO2-free society are needed and the exploration of all-solid-state batteries (ASSBs) as well as solid-state hydrogen storage applications based on metal hydrides can provide solutions for such technologies. However there are still many technical challenges for both hydrogen storage material and ASSBs related to designing low-cost materials with low-environmental impact. The current materials considered for all-solid-state batteries should have high conductivities for Na+ Mg2+ and Ca2+ while Al3+-based compounds are often marginalised due to the lack of suitable electrode and electrolyte materials. In hydrogen storage materials the sluggish kinetic behaviour of solid-state hydride materials is one of the key constraints that limit their practical uses. Therefore it is necessary to overcome the kinetic issues of hydride materials before discussing and considering them on the system level. This review summarizes the achievements of the Marie Skłodowska-Curie Actions (MSCA) innovative training network (ITN) ECOSTORE the aim of which was the investigation of different aspects of (complex) metal hydride materials. Advances in battery and hydrogen storage materials for the efficient and compact storage of renewable energy production are discussed.
Decentral Production of Green Hydrogen for Energy Systems: An Economically and Environmentally Viable Solution for Surplus Self-Generated Energy in Manufacturing Companies?
Feb 2023
Publication
Power-to-X processes where renewable energy is converted into storable liquids or gases are considered to be one of the key approaches for decarbonizing energy systems and compensating for the volatility involved in generating electricity from renewable sources. In this context the production of “green” hydrogen and hydrogen-based derivatives is being discussed and tested as a possible solution for the energy-intensive industry sector in particular. Given the sharp ongoing increases in electricity and gas prices and the need for sustainable energy supplies in production systems non-energy-intensive companies should also be taken into account when considering possible utilization paths for hydrogen. This work focuses on the following three utilization paths: “hydrogen as an energy storage system that can be reconverted into electricity” “hydrogen mobility” for company vehicles and “direct hydrogen use”. These three paths are developed modeled simulated and subsequently evaluated in terms of economic and environmental viability. Different photovoltaic system configurations are set up for the tests with nominal power ratings ranging from 300 kWp to 1000 kWp. Each system is assigned an electrolyzer with a power output ranging between 200 kW and 700 kW and a fuel cell with a power output ranging between 5 kW and 75 kW. There are also additional variations in relation to the battery storage systems within these basic configurations. Furthermore a reference variant without battery storage and hydrogen technologies is simulated for each photovoltaic system size. This means that there are ultimately 16 variants to be simulated for each utilization path. The results show that these utilization paths already constitute a reasonable alternative to fossil fuels in terms of costs in variants with a suitable energy system design. For the “hydrogen as an energy storage system” path electricity production costs of between 43 and 79 ct/kWh can be achieved with the 750 kWp photovoltaic system. The “hydrogen mobility” is associated with costs of 12 to 15 ct/km while the “direct hydrogen use” path resulted in costs of 8.2 €/kg. Environmental benefits are achieved in all three paths by replacing the German electricity mix with renewable energy sources produced on site or by substituting hydrogen for fossil fuels. The results confirm that using hydrogen as a storage medium in manufacturing companies could be economically and environmentally viable. These results also form the basis for further studies e.g. on detailed operating strategies for hydrogen technologies in scenarios involving a combination of multiple utilization paths. The work also presents the simulation-based method developed in this project which can be transferred to comparable applications in further studies.
Technical Reliability of Shipboard Technologies for the Application of Alternative Fuels
Jul 2022
Publication
Background: Naval trafc is highly dependent on depleting fossil resources and causes signifcant greenhouse gas emissions. At the same time marine transportation is a major backbone of world trade. Thus alternative fuel concepts are highly needed. Diferent fuels such as ammonia methanol liquefed natural gas and hydrogen have been proposed. For some of them frst prototype vessels have been in operation. However practical experience is still limited. Most studies so far focus on aspects such as efciency and economics. However particularly in marine applications reliability of propulsion systems is of utmost importance because failures on essential ship components at sea pose a huge safety risk. If the respective components lose their functionality repair can be much more challenging due to large distances to dockyards and the complicated transport of spare parts to the ship. Consequently evaluation of reliability should be a core element of system analysis for new marine fuels. Results: In this study reliability was studied for four potential fuels. The analysis involved several steps: estimation of overall failure rates identifcation of most vulnerable components and assessment of criticality by including severity of fault events. On the level of overall failure rate ammonia is shown to be very promising. Extending the view over a pure failure rate-based evaluation shows that other approaches such as LOHC or methanol can be competitive in terms of reliability and risk. As diferent scenarios require diferent weightings of the diferent reliability criteria the conclusion on the best technology can difer. Relevant aspects for this decision can be the availability of technical staf high-sea or coastal operation the presence of non-naval personnel onboard and other factors. Conclusions: The analysis allowed to compare diferent alternative marine fuel concepts regarding reliability. However the analysis is not limited to assessment of overall failure rates but can also help to identify critical elements that deserve attention to avoid fault events. As a last step severity of the individual failure modes was included. For the example of ammonia it is shown that the decomposition unit and the fuel cell should be subject to measures for increasing safety and reducing failure rates.
A Novel Framework for Development and Optimisation of Future Electricity Scenarios with High Penetration of Renewables and Storage
May 2019
Publication
Although electricity supply is still dominated by fossil fuels it is expected that renewable sources will have a much larger contribution in the future due to the need to mitigate climate change. Therefore this paper presents a new framework for developing Future Electricity Scenarios (FuturES) with high penetration of renewables. A multi-period linear programming model has been created for power-system expansion planning. This has been coupled with an economic dispatch model PowerGAMA to evaluate the technical and economic feasibility of the developed scenarios while matching supply and demand. Application of FuturES is demonstrated through the case of Chile which has ambitious plans to supply electricity using only renewable sources. Four cost-optimal scenarios have been developed for the year 2050 using FuturES: two Business as usual (BAU) and two Renewable electricity (RE) scenarios. The BAU scenarios are unconstrained in terms of the technology type and can include all 11 options considered. The RE scenarios aim to have only renewables in the mix including storage. The results show that both BAU scenarios have a levelised cost of electricity (LCOE) lower than or equal to today’s costs ($72.7–77.3 vs $77.6/MWh) and include 81–90% of renewables. The RE scenarios are slightly more expensive than today’s costs ($81–87/MWh). The cumulative investment for the BAU scenarios is $123-$145 bn compared to $147-$157 bn for the RE. The annual investment across the scenarios is estimated at $4.0 ± 0.4 bn. Both RE scenarios show sufficient flexibility in matching supply and demand despite solar photovoltaics and wind power contributing around half of the total supply. Therefore the FuturES framework is a powerful tool for aiding the design of cost-efficient power systems with high penetration of renewables.
Are Sustainable Aviation Fuels a Viable Option for Decarbonizing Air Transport in Europe? An Environmental and Economic Sustainability Assessment
Jan 2022
Publication
The use of drop-in capable alternative fuels in aircraft can support the European aviation sector to achieve its goals for sustainable development. They can be a transitional solution in the short and medium term as their use does not require any structural changes to the aircraft powertrain. However the production of alternative fuels is often energy-intensive and some feedstocks are associated with harmful effects on the environment. In addition alternative fuels are often more expensive to produce than fossil kerosene which can make their use unattractive. Therefore this paper analyzes the environmental and economic impacts of four types of alternative fuels compared to fossil kerosene in a well-to-wake perspective. The fuels investigated are sustainable aviation fuels produced by power-to-liquid and biomass-to-liquid pathways. Life cycle assessment and life cycle costing are used as environmental and economic assessment methods. The results of this well-towake analysis reveal that the use of sustainable aviation fuels can reduce the environmental impacts of aircraft operations. However an electricity mix based on renewable energies is needed to achieve significant reductions. In addition from an economic perspective the use of fossil kerosene ranks best among the alternatives. A scenario analysis confirms this result and shows that the production of sustainable aviation fuels using an electricity mix based solely on renewable energy can lead to significant reductions in environmental impact but economic competitiveness remains problematic.
Economic Evaluation of Low-carbon Steelmaking via Coupling of Electrolysis and Direct Reduction
Oct 2021
Publication
The transition from fossil-based primary steel production to a low-emission alternative has gained increasing attention in recent years. Various schemes including Carbon Capture and Utilization (CCU) and Carbon Direct Avoidance (CDA) via hydrogen-based as well as electrochemical routes have been proposed. With multiple technical analyses being available and technical feasibility being proven by first pilot plants pathways towards commercial market entry are of increasing interest. While multiple publications on the economic feasibility of CCU are available data on CDA approaches is scarce. In this work an economic model for the quantification of production cost as well as CO2 emission mitigation cost is presented. The approach is characterized by a seamless integration with a flowsheet-based process model of a direct reduction-based crude steel production plant detailed in a previous work and allows for the investigation of multiple economic aspects. Firstly the gradual transition from the natural gas-based state-of-the-art direct reduction towards a fossil-free hydrogen-based reduction is analyzed. Furthermore a comparison between the more mature technology of low-temperature electrolysis and a potentially more efficient solid oxide electrolysis (SOEL) is given highlighting the potential of SOEL technology. The conducted forecast to 2050 shows that SOEL-based CDA offers lower production cost when technological maturity is reached. Based on the results of the economic assessment possible legislative support mechanisms are studied showing that legislative actions are necessary to allow for market entry as well as for sustainable and economically feasible operation of fossil-free direct reduction plants.
Hydrogen Supply Chain Scenarios for the Decarbonisation of a German Multi-modal Energy System
Sep 2021
Publication
Analysing hydrogen supply chains is of utmost importance to adequately understand future energy systems with a high degree of sector coupling. Here a multi-modal energy system model is set up as linear programme incorporating electricity natural gas as well as hydrogen transportation options for Germany in 2050. Further different hydrogen import routes and optimised inland electrolysis are included. In a sensitivity analysis hydrogen demands are varied to cover uncertainties and to provide scenarios for future requirements of a hydrogen supply and transportation infrastructure. 80% of the overall hydrogen demand of 150 TWh/a emerge in Northern Germany due to optimised electrolyser locations and imports which subsequently need to be transported southwards. Therefore a central hydrogen pipeline connection from Schleswig-Holstein to the region of Darmstadt evolves already for moderate demands and appears to be a no-regret investment. Furthermore a natural gas pipeline reassignment potential of 46% is identified.
Aluminium Redox Cycle in Comparison to Pressurized Hydrogen for the Energy Supply of Multi-family Houses
Nov 2022
Publication
Power-to-X technologies that convert renewable electricity to chemically stored energy in “X” may provide a gaseous liquid or solid fuel that can be used in winter to provide both heat and electricity and thus replace fossil fuels that are currently used in many countries with cold winters. This contribution compares two options for power-to-X technologies for providing heat and electricity supply of buildings with high solar photovoltaic coverage at times of low solar availability. The option “compressed hydrogen” is based on water electrolysis that produces hydrogen on-site. This hydrogen is subsequently compressed and stored at high pressure (350 bar) for use in winter by a fuel cell. The option “aluminium redox-cycle” includes an inert electrode high temperature electrolysis process that is carried out at industrial scale. Produced aluminium is subseqeuntly transported to the site of use and converted to hydrogen and heat – and finally to electricity and heat - by aluminium-water reaction in combination with a fuel cell. Results of cost and LCA analysis show that the overall energetic efficiency of the compressed hydrogen process is slightly higher than for the aluminium redox cycle. However the aluminium redox-cycles needs far less on-site storage volume and is likely to become available at lower investment cost for the end user. Total annual cost of ownership and global warming potential of the two options are quite similar.
Green Hydrogen Production and Use in Low- and Middle-income Countries: A Least-cost Geospatial Modelling Approach Applied to Kenya
May 2023
Publication
With the rising threat of climate change green hydrogen is increasingly seen as the high-capacity energy storage and transport medium of the future. This creates an opportunity for low- and middle-income countries to leverage their high renewable energy potential to produce use and export low-cost green hydrogen creating environmental and economic development benefits. While identifying ideal locations for green hydrogen production is critical for countries when defining their green hydrogen strategies there has been a paucity of adequate geospatial planning approaches suitable to low- and middle-income countries. It is essential for these countries to identify green hydrogen production sites which match demand to expected use cases such that their strategies are economically sustainable. This paper therefore develops a novel geospatial cost modelling method to optimize the location of green hydrogen production across different use cases with a focus on suitability to low- and middle-income countries. This method is applied in Kenya to investigate the potential hydrogen supply chain for three use cases: ammonia-based fertilizer freight transport and export. We find hydrogen production costs of e3.7–9.9/kgH2 are currently achievable across Kenya depending on the production location chosen. The cheapest production locations are identified to the south and south-east of Lake Turkana. We show that ammonia produced in Kenya can be cost-competitive given the current energy crisis and that Kenya could export hydrogen to Rotterdam with costs of e7/kgH2 undercutting current market prices regardless of the carrier medium. With expected techno-economic improvements hydrogen production costs across Kenya could drop to e1.8–3.0/kgH2 by 2030.
Solar Hydrogen Fuel Generation from Wastewater—Beyond Photoelectrochemical Water Splitting: A Perspective
Oct 2022
Publication
Green hydrogen—a carbon-free renewable fuel—has the capability to decarbonise a variety of sectors. The generation of green hydrogen is currently restricted to water electrolysers. The use of freshwater resources and critical raw materials however limits their use. Alternative water splitting methods for green hydrogen generation via photocatalysis and photoelectrocatalysis (PEC) have been explored in the past few decades; however their commercial potential still remains unexploited due to the high hydrogen generation costs. Novel PEC-based simultaneous generation of green hydrogen and wastewater treatment/high-value product production is therefore seen as an alternative to conventional water splitting. Interestingly the organic/inorganic pollutants in wastewater and biomass favourably act as electron donors and facilitate the dual-functional process of recovering green hydrogen while oxidising the organic matter. The generation of green hydrogen through the dual-functional PEC process opens up opportunities for a “circular economy”. It further enables the end-of-life commodities to be reused recycled and resourced for a better life-cycle design while being economically viable for commercialisation. This review brings together and critically analyses the recent trends towards simultaneous wastewater treatment/biomass reforming while generating hydrogen gas by employing the PEC technology. We have briefly discussed the technical challenges associated with the tandem PEC process new avenues techno-economic feasibility and future directions towards achieving net neutrality.
Measurement and Modeling on Hydrogen Jet and Combustion from a Pressurize Vessel
Sep 2021
Publication
Hydrogen safety is an important topic for hydrogen energy application. Unintended hydrogen releases and combustions are potential accident scenarios which are of great interest for developing and updating the safety codes and standards. In this paper hydrogen releases and delayed ignitions were studied.
Overview of First Outcomes of PNR Project HYTUNNEL-CS
Sep 2021
Publication
Dmitry Makarov,
Donatella Cirrone,
Volodymyr V. Shentsov,
Sergii Kashkarov,
Vladimir V. Molkov,
Z. Xu,
Mike Kuznetsov,
Alexandros G. Venetsanos,
Stella G. Giannissi,
Ilias C. Tolias,
Knut Vaagsaether,
André Vagner Gaathaug,
Mark R. Pursell,
W. M. Rattigan,
Frank Markert,
Luisa Giuliani,
L.S. Sørensen,
A. Bernad,
Mercedes Sanz Millán,
U. Kummer,
C. Brauner,
Paola Russo,
J. van den Berg,
F. de Jong,
Tom Van Esbroeck,
M. Van De Veire,
D. Bouix,
Gilles Bernard-Michel,
Sergey Kudriakov,
Etienne Studer,
Domenico Ferrero,
Joachim Grüne and
G. Stern
The paper presents the first outcomes of the experimental numerical and theoretical studies performed in the funded by Fuel Cell and Hydrogen Joint Undertaking (FCH2 JU) project HyTunnel-CS. The project aims to conduct pre-normative research (PNR) to close relevant knowledge gaps and technological bottlenecks in the provision of safety of hydrogen vehicles in underground transportation systems. Pre normative research performed in the project will ultimately result in three main outputs: harmonised recommendations on response to hydrogen accidents recommendations for inherently safer use of hydrogen vehicles in underground traffic systems and recommendations for RCS. The overall concept behind this project is to use inter-disciplinary and inter-sectoral prenormative research by bringing together theoretical modelling and experimental studies to maximise the impact. The originality of the overall project concept is the consideration of hydrogen vehicle and underground traffic structure as a single system with integrated safety approach. The project strives to develop and offer safety strategies reducing or completely excluding hydrogen-specific risks to drivers passengers public and first responders in case of hydrogen vehicle accidents within the currently available infrastructure.
Import Options for Chemical Energy Carriers from Renewable Sources to Germany
Feb 2024
Publication
Import and export of fossil energy carriers are cornerstones of energy systems world-wide. If energy systems are to become climate neutral and sustainable fossil carriers need to be substituted with carbon neutral alternatives or electrified if possible. We investigate synthetic chemical energy carriers hydrogen methane methanol ammonia and Fischer-Tropsch fuels produced using electricity from Renewable Energy Source (RES) as fossil substitutes. RES potentials are obtained from GIS-analysis and hourly resolved time-series are derived using reanalysis weather data. We model the sourcing of feedstock chemicals synthesis and transport along nine different Energy Supply Chains to Germany and compare import options for seven locations around the world against each other and with domestically sourced alternatives on the basis of their respective cost per unit of hydrogen and energy delivered. We find that for each type of chemical energy carrier there is an import option with lower costs compared to domestic production in Germany. No single exporting country or energy carrier has a unique cost advantage since for each energy carrier and country there are cost-competitive alternatives. This allows exporter and infrastructure decisions to be made based on other criteria than energy and cost. The lowest cost means for importing of energy and hydrogen are by hydrogen pipeline from Denmark Spain and Western Asia and Northern Africa starting at 36 EUR/MWhLHV to 42 EUR/MWhLHV or 1.0 EUR/kgH2 to 1.3 EUR/kgH2 (in 2050 assuming 5% p.a. capital cost). For complex energy carriers derived from hydrogen like methane ammonia methanol or Fischer-Tropsch fuels imports from Argentina by ship to Germany are lower cost than closer exporters in the European Union or Western Asia and Northern Africa. For meeting hydrogen demand direct hydrogen imports are more attractive than indirect routes using methane methanol or ammonia imports and subsequent decomposition to hydrogen because of high capital investment costs and energetic losses of the indirect routes. We make our model and data available under open licenses for adaptation and reuse.
AMHYCO Project - Towards Advanced Accident Guidelines for Hydrogen Safety in Nuclear Power Plants
Sep 2021
Publication
Severe accidents in nuclear power plants are potentially dangerous to both humans and the environment. To prevent and/or mitigate the consequences of these accidents it is paramount to have adequate accident management measures in place. During a severe accident combustible gases — especially hydrogen and carbon monoxide — can be released in significant amounts leading to a potential explosion risk in the nuclear containment building. These gases need to be managed to avoid threatening the containment integrity which can result in the releases of radioactive material into the environment. The main objective of the AMHYCO project is to propose innovative enhancements in the way combustible gases are managed in case of a severe accident in currently operating reactors. For this purpose the AMHYCO project pursues three specific activities including experimental investigations of relevant phenomena related to hydrogen / carbon monoxide combustion and mitigation with PARs (Passive Autocatalytic Recombiners) improvement of the predictive capabilities of analysis tools used for explosion hazard evaluation inside the reactor containment as well as enhancement of the Severe Accident Management Guidelines (SAMGs) with respect to combustible gases risk management based on theoretical and experimental results. Officially launched on 1 October 2020 AMHYCO is an EU-funded Horizon 2020 project that will last 4 years from 2020 to 2024. This international project consists of 12 organizations (six from European countries and one from Canada) and is led by the Universidad Politécnica de Madrid (UPM). AMHYCO will benefit from the worldwide experts in combustion science accident management and nuclear safety in its Advisory Board. The paper will give an overview of the work program and planned outcome of the project.
Hydrogen-powered Aviation and its Reliance on Green Hydrogen Infrastructure - Review and Research Gaps
Oct 2021
Publication
Aircraft powered by green hydrogen (H2) are a lever for the aviation sector to reduce the climate impact. Previous research already focused on evaluations of H2 aircraft technology but analyses on infrastructure related cost factors are rarely undertaken. Therefore this paper aims to provide a holistic overview of previous efforts and introduces an approach to assess the importance of a H2 infrastructure for aviation. A short and a medium-range aircraft are modelled and modified for H2 propulsion. Based on these a detailed cost analysis is used to compare both aircraft and infrastructure related direct operating costs (DOC). Overall it is shown that the economy of H2 aviation highly depends on the availability of low-cost green liquid hydrogen (LH2) supply infrastructure. While total DOC might even slightly decrease in a best LH2 cost case total DOC could also increase between 10 and 70% (short-range) and 15e102% (medium-range) due to LH2 costs alone.
Synergies between Renewable Energy and Flexibility Investments: A Case of a Medium-Sized Industry
Nov 2021
Publication
Climate and energy policies are tools used to steer the development of a sustainable economy supplied by equally sustainable energy systems. End-users should plan their investments accounting for future policies such as incentives for system-oriented consumption emission prices and hydrogen economy to ensure long-term competitiveness. In this work the utilization of variable renewable energy and flexibility potentials in a case study of an an aggregate industry is investigated. An energy concept considering PV and battery expansion flexible production fuel cell electric trucks (FCEV) and hydrogen production is proposed and analysed under expected techno-economic conditions and policies of 2030 using an energy system optimization model. Under this concept total costs and emissions are reduced by 14% and 70% respectively compared to the business-as-usual system. The main benefit of PV investment is the lowered electricity procurement. Flexibility from schedule manufacturing and hydrogen production increases not only the self-consumption of PV generation from 51% to 80% but also the optimal PV capacity by 41%. Despite the expected cost reduction and efficiency improvement FCEV is still not competitive to diesel trucks due to higher investment and fuel prices i.e. its adoption increases the costs by 8%. However this is resolved when hydrogen can be produced from own surplus electricity generation. Our findings reveal synergistic effects between different potentials and the importance of enabling local business models e.g. regional hydrogen production and storage services. The SWOT analysis of the proposed concept shows that the pursuit of sustainability via new technologies entails new opportunities and risks. Lastly end-users and policymakers are advised to plan their investments and supports towards integration of multiple application consumption sectors and infrastructure.
Industrial Decarbonization Pathways: The Example of the German Glass Industry
Nov 2022
Publication
Mitigating anthropogenic climate change and achieving the Paris climate goals is one of the greatest challenges of the twenty-first century. To meet the Paris climate goals sector-specific transformation pathways need to be defined. The different transformation pathways are used to hypothetically quantify whether a defined climate target is achievable or not. For this reason a bottom-up model was developed to assess the extent of selected industrial decarbonization options compared to conventionally used technologies from an emissions perspective. Thereby the bottom-up model is used to analyze the German container and flat glass industries as an example. The results show that no transformation pathway can be compatible with the 1.5 °C based strict carbon dioxide budget target. Even the best case scenario exceeds the 1.5 °C based target by approximately +200%. The 2 °C based loose carbon dioxide budget target is only achievable via fuel switching the complete phase-out from natural gas to renewable energy carriers. Furthermore the results of hydrogen for flat glass production demonstrate that missing investments in renewable energy carriers may lead to the non-compliance with actually achievable 2 °C based carbon dioxide budget targets. In conclusion the phase-out from natural gas to renewable energies should be executed at the end of the life of any existing furnace and process emissions should be avoided in the long term to contribute to 1.5 °C based strict carbon dioxide budget target.
Conceptual Study and Development of an Autonomously Operating, Sailing Renewable Energy Conversion System
Jun 2022
Publication
With little time left for humanity to reduce climate change to a tolerable level a highly scalable and rapidly deployable solution is needed that can be implemented by any country. Offshore wind energy in international waters is an underused resource and could even be harnessed by landlocked countries. In this paper the use of sailing wind turbines operating autonomously in high seas to harvest energy is proposed. The electrical energy that is generated by the wind turbine is converted to a renewable fuel and stored onboard. Later the fuel will be transferred to shore or to other destinations of use. The presented idea is explored at the system level where the basic subsystems necessary are identified and defined such as energy conversion and storage as well as propulsion subsystems. Moreover various operating possibilities are investigated including a comparison of different sailing strategies and fuels for storage. Existing ideas are also briefly addressed and an example concept is suggested as well. In this paper the proposed sailing renewable energy conversion system is explored at a higher level of abstraction. Following up on this conceptual study more detailed investigations are necessary to determine whether the development of such a sailing renewable energy conversion system is viable from an engineering economic and environmental point of view.
Life Cycle Assessments on Battery Electric Vehicles and Electrolytic Hydrogen: The Need for Calculation Rules and Better Databases on Electricity
May 2021
Publication
LCAs of electric cars and electrolytic hydrogen production are governed by the consumption of electricity. Therefore LCA benchmarking is prone to choices on electricity data. There are four issues: (1) leading Life Cycle Impact (LCI) databases suffer from inconvenient uncertainties and inaccuracies (2) electricity mix in countries is rapidly changing year after year (3) the electricity mix is strongly fluctuating on an hourly and daily basis which requires time-based allocation approaches and (4) how to deal with nuclear power in benchmarking. This analysis shows that: (a) the differences of the GHG emissions of the country production mix in leading databases are rather high (30%) (b) in LCA a distinction must be made between bundled and unbundled registered electricity certificates (RECs) and guarantees of origin (GOs); the residual mix should not be applied in LCA because of its huge inaccuracy (c) time-based allocation rules for renewables are required to cope with periods of overproduction (d) benchmarking of electricity is highly affected by the choice of midpoints and/or endpoint systems and (e) there is an urgent need for a new LCI database based on measured emission data continuously kept up-to-date transparent and open access.
Technical Evaluation of the Flexibility of Water Electrolysis Systems to Increase Energy Flexibility: A Review
Jan 2023
Publication
The goal of achieving water electrolysis on a gigawatt scale faces numerous challenges regarding technological feasibility and market application. Here the flexibility of operation scenarios such as load changes and capacity of electrolysis plays a key role. This raises the question of how flexible electrolysis systems currently are and what possibilities there are to increase flexibility. In order to be able to answer this question in the following a systematic literature research was carried out with the aim to show the current technical possibilities to adapt load and capacity of electrolysis technologies and to determine limits. The result of the systematic literature research is an overview matrix of the electrolysis types AEL PEMEL HTEL and AEMEL already applied in the market. Technical data on the operation of the respective electrolysis stacks as well as details and materials for the respective stack structure (cathode anode electrolyte) were summarized. The flexibility of the individual technologies is addressed by expressing it in values such as load flexibility and startup-times. The overview matrix contains values from various sour1ces in order to make electrolysis comparable at the stack level and to be able to make statements about flexibility. The result of the overview article shows the still open need for research and development to make electrolysis more flexible.
Carbon Footprint Assessment of Hydrogen and Steel
Dec 2022
Publication
Hydrogen has the potential to decarbonize a variety of energy-intensive sectors including steel production. Using the life cycle assessment (LCA) methodology the state of the art is given for current hydrogen production with a focus on the hydrogen carbon footprint. Beside the state of the art the outlook on different European scenarios up to the year 2040 is presented. A case study of the transformation of steel production from coal-based towards hydrogen- and electricity-based metallurgy is presented. Direct reduction plants with integrated electric arc furnaces enable steel production which is almost exclusively based on hydrogen and electricity or rather on electricity alone if hydrogen stems from electrolysis. Thus an integrated steel site has a demand of 4.9 kWh of electric energy per kilogram of steel. The carbon footprint of steel considering a European sustainable development scenario concerning the electricity mix is 0.75 kg CO2eq/kg steel in 2040. From a novel perspective a break-even analysis is given comparing the use of natural gas and hydrogen using different electricity mixes. The results concerning hydrogen production presented in this paper can also be transferred to application fields other than steel.
Building the Green Hydrogen Market - Current State and Outlook on Green Hydrogen Demand and Electrolyzer Manufacturing
Jul 2022
Publication
Over the past two years requirements to meet climate targets have been intensified. In addition to the tightening of the climate targets and the demand for net-zero achievement by as early as 2045 there have been discussions on implementing and realizing these goals. Hydrogen has emerged as a promising climate-neutral energy carrier. Thus over the last 1.5 years more than 25 countries have published hydrogen roadmaps. Furthermore various studies by different authorities have been released to support the development of a hydrogen economy. This paper examines published studies and hydrogen country roadmaps as part of a meta-analysis. Furthermore a market analysis of electrolyzer manufacturers is conducted. The prospected demand for green hydrogen from various studies is compared to electrolyzer manufacturing capacities and selected green hydrogen projects to identify potential market ramp-up scenarios and to evaluate if green hydrogen demand forecasts can be filled.
The Role of Renewable Energies, Storage and Sector-Coupling Technologies in the German Energy Sector under Different CO2 Emission Restrictions
Aug 2022
Publication
This study aimed to simulate the sector-coupled energy system of Germany in 2030 with the restriction on CO2 emission levels and to observe how the system evolves with decreasing emissions. Moreover the study presented an analysis of the interconnection between electricity heat and hydrogen and how technologies providing flexibility will react when restricting CO2 emissions levels. This investigation has not yet been carried out with the technologies under consideration in this study. It shows how the energy system behaves under different set boundaries of CO2 emissions and how the costs and technologies change with different emission levels. The study results show that the installed capacities of renewable technologies constantly increase with higher limitations on emissions. However their usage rates decreases with low CO2 emission levels in response to higher curtailed energy. The sector-coupled technologies behave differently in this regard. Heat pumps show similar behaviour while the electrolysers usage rate increases with more renewable energy penetration. The system flexibility is not primarily driven by the hydrogen sector but in low CO2 emission level scenarios the flexibility shifts towards the heating sector and electrical batteries.
Renewable Methanol Synthesis
Oct 2019
Publication
Renewable methanol production is an emerging technology that bridges the gap in the shift from fossil fuel to renewable energy. Two thirds of the global emission of CO2 stems from humanity’s increasing energy need from fossil fuels. Renewable energy mainly from solar and wind energy suffers from supply intermittency which current grid infrastructures cannot accommodate. Excess renewable energy can be harnessed to power the electrolysis of water to produce hydrogen which can be used in the catalytic hydrogenation of waste CO2 to produce renewable methanol. This review considers methanol production in the current context regionally for Europe which is dominated by Germany and globally by China. Appropriate carbon-based feedstock for renewable methanol production is considered as well as state-of-the-art renewable hydrogen production technologies. The economics of renewable methanol production necessitates the consideration of regionally relevant methanol derivatives. The thermodynamics kinetics catalytic reaction mechanism operating conditions and reactor design are reviewed in the context of renewable methanol production to reveal the most up to date understanding.
Risks and Opportunities Associated with Decarbonising Rotterdam’s Industrial Cluster
Jun 2019
Publication
The Port of Rotterdam is an important industrial cluster comprising mainly oil refining chemical production and power generation. In 2016 the port’s industry accounted for 19% of the Netherlands’ total CO2 emissions. The Port of Rotterdam Authority is aware that the cluster is heavily exposed to future decarbonisation policies as most of its activities focus on trading handling converting and using fossil fuels. Based on a study for the Port Authority using a mixture of qualitative and quantitative methods our article explores three pathways whereby the port’s industry can maintain its strong position while significantly reducing its CO2 emissions and related risks by 2050. The pathways differ in terms of the EU’s assumed climate change mitigation ambitions and the key technological choices made by the cluster’s companies. The focus of the paper is on identifying key risks associated with each scenario and ways in which these could be mitigated.
Strategic Policy Targets and the Contribution of Hydrogen in a 100% Renewable European Power System
Jul 2021
Publication
The goal of the European energy policy is to achieve climate neutrality. The long-term energy strategies of various European countries include additional targets such as the diversification of energy sources maintenance of security of supply and reduction of import dependency. When optimizing energy systems these strategic policy targets are often only considered in a rudimentary manner and thus the understanding of the corresponding interdependencies is lacking. Moreover hydrogen is considered as a key component of a fully decarbonized energy system but its role in the power sector remains unclear due to the low round-trip efficiencies. This study reveals how fully decarbonized European power systems can benefit from hydrogen in terms of overall system costs and the achievement of strategic policy targets. We analyzed a broad spectrum of scenarios using an energy system optimization model and varied model constraints that reflect strategic policy targets. Our results are threefold. First compared to power systems without hydrogen systems using hydrogen realize savings of 14–16% in terms of the total system costs. Second the implementation of a hydrogen infrastructure reduces the number of infeasible scenarios when structural policy targets are considered within the power system. Third the role of hydrogen is highly diverse at a national level. Particularly in countries with low renewable energy potential hydrogen plays a crucial role. Here high levels of self-sufficiency and security of supply are achieved by deploying hydrogen-based power generation of up to 46% of their annual electricity demand realized via imports of green hydrogen.
A Holistic Consideration of Megawatt Electrolysis as a Key Component of Sector Coupling
May 2022
Publication
In the future hydrogen (H2) will play a significant role in the sustainable supply of energy and raw materials to various sectors. Therefore the electrolysis of water required for industrial‐ scale H2 production represents a key component in the generation of renewable electricity. Within the scope of fundamental research work on cell components for polymer electrolyte membrane (PEM) electrolyzers and application‐oriented living labs an MW electrolysis system was used to further improve industrial‐scale electrolysis technology in terms of its basic structure and systems‐ related integration. The planning of this work as well as the analytical and technical approaches taken along with the essential results of research and development are presented herein. The focus of this study is the test facility for a megawatt PEM electrolysis stack with the presentation of the design processing and assembly of the main components of the facility and stack.
Demand Side Management Based Power-to-Heat and Power-to-Gas Optimization Strategies for PV and Wind Self-Consumption in a Residential Building Cluster
Oct 2021
Publication
The volatility of renewable energy sources (RES) poses a growing problem for operation of electricity grids. In contrary the necessary decarbonisation of sectors such as heat supply and transport requires a rapid expansion of RES. Load management in the context of power-to-heat systems can help to simultaneously couple the electricity and heat sectors and stabilise the electricity grid thus enabling a higher share of RES. In addition power-to-hydrogen offers the possibility of long-term energy storage options. Within this work we present a novel optimization approach for heat pump operation with the aim to counteract the volatility and enable a higher usage of RES. For this purpose a detailed simulation model of buildings and their energy supply systems is created calibrated and validated based on a plus energy settlement. Subsequently the potential of optimized operation is determined with regard to PV and small wind turbine self-consumption. In addition the potential of seasonal hydrogen storage is examined. The results show that on a daily basis a 33% reduction of electricity demand from grid is possible. However the average optimization potential is reduced significantly by prediction inaccuracy. The addition of a hydrogen system for seasonal energy storage basically eliminates the carbon dioxide emissions of the cluster. However this comes at high carbon dioxide prevention costs of 1.76 e kg−1 .
Challenges in the Decarbonization of the Energy Sector
Jun 2020
Publication
In order to limit the effects of climate change the carbon dioxide emissions associated with the energy sector need to be reduced. Significant reductions can be achieved by using appropriate technologies and policies. In the context of recent discussions about climate change and energy transition this article critically reviews some technologies policies and frequently discussed solutions. The options for carbon emission reductions are grouped into (1) generation of secondary energy carriers (2) end-use energy sectors and (3) sector interdependencies. The challenges on the way to a decarbonized energy sector are identified with respect to environmental sustainability security of energy supply economic stability and social aspects. A global carbon tax is the most promising instrument to accelerate the process of decarbonization. Nevertheless this process will be very challenging for humanity due to high capital requirements the competition among energy sectors for decarbonization options inconsistent environmental policies and public acceptance of changes in energy use.
Analyzing the Necessity of Hydrogen Imports for Net-zero Emission Scenarios in Japan
Jun 2021
Publication
With Japan’s current plans to reach a fully decarbonized society by 2050 and establish a hydrogen society substantial changes to its energy system need to be made. Due to the limited land availability in Japan significant amounts of hydrogen are planned to be imported to reach both targets. In this paper a novel stochastic version of the open-source multi-sectoral Global Energy System Model in conjunction with a power system dispatch model is used to analyze the impacts of both availability and price of hydrogen imports on the transformation of the Japanese energy system considering a net-zero emission target. This analysis highlights that hydrogen poses a valuable resource in specific sectors of the energy system. Therefore importing hydrogen can indeed positively impact energy system developments although up to 19mt of hydrogen will be imported in the case with the cheapest available hydrogen. In contrast without any hydrogen imports power demand nearly doubles in 2050 compared to 2019 due to extensive electrification in non-electricity sectors. However hydrogen imports are not necessarily required to reach net-zero emissions. In all cases however large-scale investments into renewable energy sources need to be made.
Mg-based Materials for Hydrogen Storage
Aug 2021
Publication
Over the last decade’s magnesium and magnesium based compounds have been intensively investigated as potential hydrogen storage as well as thermal energy storage materials due to their abundance and availability as well as their extraordinary high gravimetric and volumetric storage densities. This review work provides a broad overview of the most appealing systems and of their hydrogenation/dehydrogenation properties. Special emphasis is placed on reviewing the efforts made by the scientific community in improving the material’s thermodynamic and kinetic properties while maintaining a high hydrogen storage capacity.
Multiscale Modelling of Hydrogen Transport and Segregation in Polycrystalline Steels
Jun 2018
Publication
A key issue in understanding and effectively managing hydrogen embrittlement in complex alloys is identifying and exploiting the critical role of the various defects involved. A chemo-mechanical model for hydrogen diffusion is developed taking into account stress gradients in the material as well as microstructural trapping sites such as grain boundaries and dislocations. In particular the energetic parameters used in this coupled approach are determined from ab initio calculations. Complementary experimental investigations that are presented show that a numerical approach capable of massive scale-bridging up to the macroscale is required. Due to the wide range of length scales accounted for we apply homogenisation schemes for the hydrogen concentration to reach simulation dimensions comparable to metallurgical process scales. Via a representative volume element approach an ab initio based scale bridging description of dislocation-induced hydrogen aggregation is easily accessible. When we extend the representative volume approach to also include an analytical approximation for the ab initio based description of grain boundaries we find conceptual limitations that hinder a quantitative comparison to experimental data in the current stage. Based on this understanding the development of improved strategies for further efficient scale bridging approaches is foreseen.
Recent Progress and New Perspectives on Metal Amide and Imide Systems for Solid-State Hydrogen Storage
Apr 2018
Publication
Hydrogen storage in the solid state represents one of the most attractive and challenging ways to supply hydrogen to a proton exchange membrane (PEM) fuel cell. Although in the last 15 years a large variety of material systems have been identified as possible candidates for storing hydrogen further efforts have to be made in the development of systems which meet the strict targets of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) and U.S. Department of Energy (DOE). Recent projections indicate that a system possessing: (i) an ideal enthalpy in the range of 20–50 kJ/mol H2 to use the heat produced by PEM fuel cell for providing the energy necessary for desorption; (ii) a gravimetric hydrogen density of 5 wt. % H2 and (iii) fast sorption kinetics below 110 ◦C is strongly recommended. Among the known hydrogen storage materials amide and imide-based mixtures represent the most promising class of compounds for on-board applications; however some barriers still have to be overcome before considering this class of material mature for real applications. In this review the most relevant progresses made in the recent years as well as the kinetic and thermodynamic properties experimentally measured for the most promising systems are reported and properly discussed.
Cold Hydrogen Blowdown Release: An Inter-comparison Study
Sep 2021
Publication
Hydrogen dispersion in stagnant environment resulting from blowdown of a vessel storing the gas at cryogenic temperature is simulated using different CFD codes and modelling strategies. The simulations are based on the DISCHA experiments that were carried out by Karlsruhe Institute of Technology (KIT) and Pro-Science (PS). The selected test for the current study involves hydrogen release from a 2.815 dm3 volume tank with an initial pressure of 200 barg and temperature 80 K. During the release the hydrogen pressure in the tank gradually decreased. A total of about 139 gr hydrogen is released through a 4 mm diameter. The temperature time series and the temperature decay rate of the minimum value predicted by the different codes are compared with each other and with the experimentally measured ones. Recommendations for future experimental setup and for modeling approaches for similar releases are provided based on the present analysis. The work is carried out within the EU-funded project PRESLHY.
Renewable Power-to-Gas: A Technological and Economic Review
Aug 2015
Publication
The Power-to-Gas (PtG) process chain could play a significant role in the future energy system. Renewable electric energy can be transformed into storable methane via electrolysis and subsequent methanation. This article compares the available electrolysis and methanation technologies with respect to the stringent requirements of the PtG chain such as low CAPEX high efficiency and high flexibility. Three water electrolysis technologies are considered: alkaline electrolysis PEM electrolysis and solid oxide electrolysis. Alkaline electrolysis is currently the cheapest technology; however in the future PEM electrolysis could be better suited for the PtG process chain. Solid oxide electrolysis could also be an option in future especially if heat sources are available. Several different reactor concepts can be used for the methanation reaction. For catalytic methanation typically fixed-bed reactors are used; however novel reactor concepts such as three-phase methanation and micro reactors are currently under development. Another approach is the biochemical conversion. The bioprocess takes place in aqueous solutions and close to ambient temperatures. Finally the whole process chain is discussed. Critical aspects of the PtG process are the availability of CO2 sources the dynamic behaviour of the individual process steps and especially the economics as well as the efficiency.
Hydrogen and Hydrogen-derived Fuels through Methane Decomposition of Natural Gas – GHG Emissions and Costs
May 2020
Publication
Hydrogen can be produced from the decomposition of methane (also called pyrolysis). Many studies assume that this process emits few greenhouse gas (GHG) because the reaction from methane to hydrogen yields only solid carbon and no CO2. This paper assesses the life-cycle GHG emissions and the levelized costs for hydrogen provision from methane decomposition in three configurations (plasma molten metal and thermal gas). The results of these configurations are then compared to electrolysis and steam methane reforming (SMR) with and without CO2capture and storage (CCS). Under the global natural gas supply chain conditions hydrogen from methane decomposition still causes significant GHG emissions between 43 and 97 g CO2-eq./MJ. The bandwidth is predominately determined by the energy source providing the process heat i.e. the lowest emissions are caused by the plasma system using renewable electricity. This configuration shows lower GHG emissions compared to the “classical” SMR (99 g CO2-eq./MJ) but similar emissions to the SMR with CCS (46 g CO2-eq./MJ). However only electrolysis powered with renewable electricity leads to very low GHG emissions (3 g CO2-eq./MJ). Overall the natural gas supply is a decisive factor in determining GHG emissions. A natural gas supply with below-global average GHG emissions can lead to lower GHG emissions of all methane decomposition configurations compared to SMR. Methane decomposition systems (1.6 to 2.2 €/kg H2) produce hydrogen at costs substantially higher compared to SMR (1.0 to 1.2 €/kg) but lower than electrolyser (2.5 to 3.0 €/kg). SMR with CCS has the lowest CO2abatement costs (24 €/t CO2-eq. other > 141 €/t CO2-eq.). Finally fuels derived from different hydrogen supply options are assessed. Substantially lower GHG emissions compared to the fossil reference (natural gas and diesel/gasoline) are only possible if hydrogen from electrolysis powered by renewable energy is used (>90% less). The other hydrogen pathways cause only slightly lower or even higher GHG emissions.
On the Climate Impacts of Blue Hydrogen Production
Nov 2021
Publication
Natural gas based hydrogen production with carbon capture and storage is referred to as blue hydrogen. If substantial amounts of CO2 from natural gas reforming are captured and permanently stored such hydrogen could be a low-carbon energy carrier. However recent research raises questions about the effective climate impacts of blue hydrogen from a life cycle perspective. Our analysis sheds light on the relevant issues and provides a balanced perspective on the impacts on climate change associated with blue hydrogen. We show that such impacts may indeed vary over large ranges and depend on only a few key parameters: the methane emission rate of the natural gas supply chain the CO2 removal rate at the hydrogen production plant and the global warming metric applied. State-of-the-art reforming with high CO2 capture rates combined with natural gas supply featuring low methane emissions does indeed allow for substantial reduction of greenhouse gas emissions compared to both conventional natural gas reforming and direct combustion of natural gas. Under such conditions blue hydrogen is compatible with low-carbon economies and exhibits climate change impacts at the upper end of the range of those caused by hydrogen production from renewable-based electricity. However neither current blue nor green hydrogen production pathways render fully “net-zero” hydrogen without additional CO2 removal.
Decarbonizing the German Industrial Thermal Energy Use with Solar, Hydrogen, and Other Options - Recommendations for the World
Nov 2022
Publication
This paper is based on a position paper of the German Industry Association Concentrated Solar Power e.V. to the German government and discusses options on how to decarbonize the heat demand of the domestic industry. Among other option concentration solar collectors are a suitable option in Germany which has not been expected by many experts. The paper derives requirements that are needed to ensure a quick and sustainable way to decarbonize industrial heat demand. They are considered to also be relevant for many other countries that follow the same ambition to become climate neutral in the next decades. They major statements are: A mix of different renewable energy technologies in conjunction with efficiency measures is needed to ensure a secure climate-friendly and cost-efficient heat supply for the industry; The different technology options for the provision of heat from renewable sources through electrification and through hydrogen can and must be combined and integrated with each other. In this context concentrating solar thermal represents an important part of the hybrid supply portfolio of a decarbonized industry This requires: The definition of an expansion target for process heat and the flanking measures; Ensuring the equivalence of renewable heat renewable electricity and green hydrogen - also as hybrid solutions; The promotion of concentrating solar thermal reference projects as an impetus for market ramp-up in Germany; The launch of an information campaign for heat consumers and the establishment of a pool of consultants.
Quantification of Hydrogen in Nanostructured Hydrogenated Passivating Contacts for Silicon Photovoltaics Combining SIMS-APT-TEM: A Multiscale Correlative Approach
Mar 2021
Publication
Multiscale characterization of the hydrogenation process of silicon solar cell contacts based on c-Si/SiOx/nc-SiCx(p) has been performed by combining dynamic secondary ion mass-spectrometry (D-SIMS) atom probe tomography (APT) and transmission electron microscopy (TEM). These contacts are formed by high-temperature firing which triggers the crystallization of SiCx followed by a hydrogenation process to passivate remaining interfacial defects. Due to the difficulty of characterizing hydrogen at the nm-scale the exact hydrogenation mechanisms have remained elusive. Using a correlative TEM-SIMS-APT analysis we are able to locate hydrogen trap sites and quantify the hydrogen content. Deuterium (D) a heavier isotope of hydrogen is used to distinguish hydrogen introduced during hydrogenation from its background signal. D-SIMS is used due to its high sensitivity to get an accurate deuterium-to-hydrogen ratio which is then used to correct deuterium profiles extracted from APT reconstructions. This new methodology to quantify the concentration of trapped hydrogen in nm-scale structures sheds new insights on hydrogen distribution in technologically important photovoltaic materials.
Hydrogen Supply Chains for Mobility—Environmental and Economic Assessment
May 2018
Publication
Hydrogen mobility is one option for reducing local emissions avoiding greenhouse gas (GHG) emissions and moving away from a mainly oil-based transport system towards a diversification of energy sources. As hydrogen production can be based on a broad variety of technologies already existing or under development a comprehensive assessment of the different supply chains is necessary regarding not only costs but also diverse environmental impacts. Therefore in this paper a broad variety of hydrogen production technologies using different energy sources renewable and fossil are exemplarily assessed with the help of a Life Cycle Assessment and a cost assessment for Germany. As environmental impacts along with the impact category Climate change five more advanced impact categories are assessed. The results show that from an environmental point of view PEM and alkaline electrolysis are characterized by the lowest results in five out of six impact categories. Supply chains using fossil fuels in contrast have the lowest supply costs; this is true e.g. for steam methane reforming. Solar powered hydrogen production shows low impacts during hydrogen production but high impacts for transport and distribution to Germany. There is no single supply chain that is the most promising for every aspect assessed here. Either costs have to be lowered further or supply chains with selected environmental impacts have to be modified.
Power-to-Gas and Power-to-X—The History and Results of Developing a New Storage Concept
Oct 2021
Publication
Germany’s energy transition known as ‘Energiewende’ was always very progressive. However it came technically to a halt at the question of large-scale seasonal energy storage for wind and solar which was not available. At the end of the 2000s we combined our knowledge of both electrical and process engineering imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2 -methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term ‘sector coupling’ or ‘sectoral integration’. We first implemented demo sites presented our work in research industry and ministries and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid Power-to-Chemicals and other ways to ‘convert’ electricity into molecules and climate-neutral feedstocks and named it ‘Power-to-X’ at the beginning of the 2010s.
Response Time Measurement of Hydrogen Sensors
Sep 2017
Publication
The efficiency of gas sensor application for facilitating the safe use of hydrogen depends considerably on the sensor response to a change in hydrogen concentration. Therefore the response time has been measured for five different-type commercially available hydrogen sensors. Experiments showed that all these sensors surpass the ISO 26142 standard; for the response times t90 values of 2 s to 16 s were estimated. Results can be fitted with an exponential or sigmoidal function. It can be demonstrated that the results on transient behaviour depend on both the operating parameters of sensors and investigation methods as well as on the experimental conditions: gas change rate and concentration jump.
In Situ Neutron Radiography Investigations of Hydrogen Related Processes in Zirconium Alloys
Jun 2021
Publication
In situ neutron radiography experiments can provide information about diffusive processes and the kinetics of chemical reactions. The paper discusses requirements for such investigations. As examples of the zirconium alloy Zircaloy-4 the hydrogen diffusion the hydrogen uptake during high-temperature oxidation in steam and the reaction in nitrogen/steam and air/steam atmospheres results of in situ neutron radiography investigations are reviewed and their benefit is discussed.
Experimental Investigation on the Burning Behavior of Homogenous H2-CO-Air Mixtures in an Obstructed Semi-confined Channel
Sep 2021
Publication
In the current work the combustion behavior of hydrogen-carbon monoxide-air mixtures in semiconfined geometries is investigated in a large horizontal channel facility (dimensions 9 m x 3 m x 0.6 m (L x W x H)) as a part of a joint German nuclear safety project. In the channel with evenly distributed obstacles (blockage ratio 50%) and an open to air ground face homogeneous H2-CO-air mixtures are ignited at one end. The combustion behavior of the mixture is analyzed using the signals of pressure sensors modified thermocouples and ionization probes for flame front detection that are distributed along the channel ceiling. In the experiments various fuel concentrations (cH2 + cCO = 14 to 22 Vol%) with different H2:CO ratios (75:25 50:50 and 25:75) are used and the transition regions for a significant flame acceleration to sonic speed (FA) as well as to a detonation (DDT) are investigated. The conditions for the onset of these transitions are compared with earlier experiments performed in the same facility with H2-air mixtures. The results of this work will help to allow a more realistic estimation of the pressure loads generated by the combustion of H2-CO-air mixtures in obstructed semi-confined geometries.
Monte-Carlo-Analysis of Minimum Burst Requirements for Composite Cylinders for Hydrogen Service
Sep 2021
Publication
For achieving Net Zero-aims hydrogen is an indispensable component probably the main component. For the usage of hydrogen a wide acceptance is necessary which requires trust in hydrogen based on absence of major incidents resulting from a high safety level. Burst tests stand for a type of testing that is used in every test standard and regulation as one of the key issues for ensuring safety in use. The central role of burst and proof test is grown to historical reasons for steam engines and steel vessels but - with respect for composite pressure vessels (CPVs) - not due an extraordinary depth of outcomes. Its importance results from the relatively simple test process with relatively low costs and gets its importance by running of the different test variations in parallel. In relevant test und production standards (as e. g. ECE R134) the burst test is used in at least 4 different meanings. There is the burst test on a) new CPVs and some others b) for determining the residual strength subsequent to various simulations of ageing effects. Both are performed during the approval process on a pre-series. Then there is c) the batch testing during the CPVs production and finally d) the 100% proof testing which means to stop the burst test at a certain pressure level. These different aspects of burst tests are analysed and compared with respect to its importance for the resulting safety of the populations of CPVs in service based on experienced test results and Monte-Carlo simulations. As main criterial for this the expected failure rate in a probabilistic meaning is used. This finally ends up with recommendations for relevant RC&S especially with respect to GTR 13."
Complex Hydrides for Hydrogen Storage – New Perspectives
Apr 2014
Publication
Since the 1970s hydrogen has been considered as a possible energy carrier for the storage of renewable energy. The main focus has been on addressing the ultimate challenge: developing an environmentally friendly successor for gasoline. This very ambitious goal has not yet been fully reached as discussed in this review but a range of new lightweight hydrogen-containing materials has been discovered with fascinating properties. State-of-the-art and future perspectives for hydrogen-containing solids will be discussed with a focus on metal borohydrides which reveal significant structural flexibility and may have a range of new interesting properties combined with very high hydrogen densities.
Hydrogeochemical Modeling to Identify Potential Risks of Underground Hydrogen Storage in Depleted Gas Fields
Nov 2018
Publication
Underground hydrogen storage is a potential way to balance seasonal fluctuations in energy production from renewable energies. The risks of hydrogen storage in depleted gas fields include the conversion of hydrogen to CH4(g) and H2S(g) due to microbial activity gas–water–rock interactions in the reservoir and cap rock which are connected with porosity changes and the loss of aqueous hydrogen by diffusion through the cap rock brine. These risks lead to loss of hydrogen and thus to a loss of energy. A hydrogeochemical modeling approach is developed to analyze these risks and to understand the basic hydrogeochemical mechanisms of hydrogen storage over storage times at the reservoir scale. The one-dimensional diffusive mass transport model is based on equilibrium reactions for gas–water–rock interactions and kinetic reactions for sulfate reduction and methanogenesis. The modeling code is PHREEQC (pH-REdox-EQuilibrium written in the C programming language). The parameters that influence the hydrogen loss are identified. Crucial parameters are the amount of available electron acceptors the storage time and the kinetic rate constants. Hydrogen storage causes a slight decrease in porosity of the reservoir rock. Loss of aqueous hydrogen by diffusion is minimal. A wide range of conditions for optimized hydrogen storage in depleted gas fields is identified.
Seasonal Storage and Alternative Carriers: A Flexible Hydrogen Supply Chain Model
May 2017
Publication
A viable hydrogen infrastructure is one of the main challenges for fuel cells in mobile applications. Several studies have investigated the most cost-efficient hydrogen supply chain structure with a focus on hydrogen transportation. However supply chain models based on hydrogen produced by electrolysis require additional seasonal hydrogen storage capacity to close the gap between fluctuation in renewable generation from surplus electricity and fuelling station demand. To address this issue we developed a model that draws on and extends approaches in the literature with respect to long-term storage. Thus we analyse Liquid Organic Hydrogen Carriers (LOHC) and show their potential impact on future hydrogen mobility. We demonstrate that LOHC-based pathways are highly promising especially for smaller-scale hydrogen demand and if storage in salt caverns remains uncompetitive but emit more greenhouse gases (GHG) than other gaseous or hydrogen ones. Liquid hydrogen as a seasonal storage medium offers no advantage compared to LOHC or cavern storage since lower electricity prices for flexible operation cannot balance the investment costs of liquefaction plants. A well-to-wheel analysis indicates that all investigated pathways have less than 30% GHG-emissions compared to conventional fossil fuel pathways within a European framework.
Production Costs for Synthetic Methane in 2030 and 2050 of an Optimized Power-to-Gas Plant with Intermediate Hydrogen Storage
Aug 2019
Publication
The publication gives an overview of the production costs of synthetic methane in a Power-to-Gas process. The production costs depend in particularly on the electricity price and the full load hours of the plant sub-systems electrolysis and methanation. The full-load hours of electrolysis are given by the electricity supply concept. In order to increase the full-load hours of methanation the size of the intermediate hydrogen storage tank and the size of the methanation are optimised on the basis of the availability of hydrogen. The calculation of the production costs for synthetic methane are done with economics for 2030 and 2050 and the expenditures are calculated for one year of operation. The sources of volume of purchased electricity are the short-term market long-term contracts direct-coupled renewable energy sources or seasonal use of surpluses. Gas sales are either traded on the short-term market or guaranteed by long-term contracts. The calculations show that an intermediate storage tank for hydrogen adjustment of the methanation size and operating electrolysis and methanation separately increase the workload of the sub-system methanation. The gas production costs can be significantly reduced. With the future expected development of capital expenditures operational expenditure electricity prices gas costs and efficiencies an economic production of synthetic natural gas for the years 2030 especially for 2050 is feasible. The results show that Power-to-Gas is an option for long-term large-scale seasonal storage of renewable energy. Especially the cases with high operating hours for the sub-system methanation and low electricity prices show gas production costs below the expected market prices for synthetic gas and biogas.
Risk-adjusted Preferences of Utility Companies and Institutional Investors for Battery Storage and Green Hydrogen Investment
Feb 2022
Publication
Achieving climate-neutrality requires considerable investment in energy storage systems (ESS) to integrate variable renewable energy sources into the grid. However investments into ESS are often unprofitable in particular for grid-scale battery storage and green hydrogen technologies prompting many actors to call for policy intervention. This study investigates investor-specific risk-return preferences for ESS investment and derives policy recommendations. Insights are drawn from 1605 experimental investment-related decisions obtained from 42 high-level institutional investors and utility representatives. Results reveal that both investor groups view revenue stacking as key to making ESS investment viable. While the expected return on investment is the most important project characteristic risk-return preferences for other features diverge between groups. Institutional investors appear more open to exploring new technological ventures (20% of utility respondents would not consider making investments into solar photovoltaic-hydrogen) whereas utilities seem to prefer greenfield projects (23% of surveyed institutional investors rejected such projects). Interestingly both groups show strong aversion towards energy market price risk. Institutional investors require a premium of 6.87 percentage points and utilities 5.54 percentage points for moving from a position of fully hedged against market price risk to a scenario where only 20% of revenue is fixed underlining the need for policy support.
Optimal Supply Chains and Power Sector Benefits of Green Hydrogen
Jul 2021
Publication
Green hydrogen can help to decarbonize parts of the transportation sector but its power sector interactions are not well understood so far. It may contribute to integrating variable renewable energy sources if production is sufficiently flexible in time. Using an open-source co-optimization model of the power sector and four options for supplying hydrogen at German filling stations we find a trade-of between energy efficiency and temporal flexibility. For lower shares of renewables and hydrogen more energy-efficient and less flexible small-scale on-site electrolysis is optimal. For higher shares of renewables and/or hydrogen more flexible but less energy-efficient large-scale hydrogen supply chains gain importance as they allow to temporally disentangle hydrogen production from demand via storage. Liquid hydrogen emerges as particularly beneficial followed by liquid organic hydrogen carriers and gaseous hydrogen. Large-scale hydrogen supply chains can deliver substantial power sector benefits mainly through reduced renewable curtailment. Energy modelers and system planners should consider the distinct flexibility characteristics of hydrogen supply chains in more detail when assessing the role of green hydrogen in future energy transition scenarios. We also propose two alternative cost and emission metrics which could be useful in future analyses.
Deployment of Fuel Cell Vehicles and Hydrogen Refueling Station Infrastructure: A Global Overview and Perspectives
Jul 2022
Publication
Hydrogen fuel cell vehicles can complement other electric vehicle technologies as a zeroemission technology and contribute to global efforts to achieve the emission reduction targets. This article spotlights the current deployment status of fuel cells in road transport. For this purpose data collection was performed by the Advanced Fuel Cells Technology Collaboration Programme. Moreover the available incentives for purchasing a fuel cell vehicle in different countries were reviewed and future perspectives summarized. Based on the collected information the development trends in the last five years were analyzed and possible further trends that could see the realization of the defined goals derived. The number of registered vehicles was estimated to be 51437 units with South Korea leading the market with 90% of the vehicles being concentrated in four countries. A total of 729 hydrogen refueling stations were in operation with Japan having the highest number of these. The analysis results clearly indicate a very positive development trend for fuel cell vehicles and hydrogen refueling stations in 2021 with the highest number of new vehicles and stations in a single year paralleling the year’s overall economic recovery. Yet a more ambitious ramp-up in the coming years is required to achieve the set targets.
Analysis and Design of Fuel Cell Systems for Aviation
Feb 2018
Publication
In this paper the design of fuel cells for the main energy supply of passenger transportation aircraft is discussed. Using a physical model of a fuel cell general design considerations are derived. Considering different possible design objectives the trade-off between power density and efficiency is discussed. A universal cost–benefit curve is derived to aid the design process. A weight factor wP is introduced which allows incorporating technical (e.g. system mass and efficiency) as well as non-technical design objectives (e.g. operating cost emission goals social acceptance or technology affinity political factors). The optimal fuel cell design is not determined by the characteristics of the fuel cell alone but also by the characteristics of the other system components. The fuel cell needs to be designed in the context of the whole energy system. This is demonstrated by combining the fuel cell model with simple and detailed design models of a liquid hydrogen tank. The presented methodology and models allows assessing the potential of fuel cell systems for mass reduction of future passenger aircraft.
Cost-effective Technology Choice in a Decarbonized and Diversified Long-haul Truck Transportation Sector: A U.S. Case Study
Dec 2021
Publication
Achieving net-zero emissions by 2050 will require accelerated efforts that include decarbonizing long-haul truck transportation. In this difficult-to-decarbonize low-margin industry economic transparency on technology options is vital for decision makers seeking to eliminate emissions. Battery electric (BET) and hydrogen fuel cell electric trucks (FCET) can represent emission-free alternatives to diesel-powered trucks (DT). Previous studies focus on cost competitiveness in weight-constrained transportation even though logistics research shows that significant shares of transportation are constrained by volume and analyze cost only for selected technologies hence impeding a differentiated market segmentation of future emission-free trucks. In this study the perspective of a rational investor is taken and it is shown that under current conditions in the U.S. BETs outperform FCETs in various long-haul use cases despite charging times and cargo deficits and will further increase their technological competitiveness to DTs. While future energy and fueling prices are decisive for BET competitiveness the analysis reveals that autonomous driving may change the picture in favor of FCETs.
Electrofuels from Excess Renewable Electricity at High Variable Renewable Shares: Cost, Greenhouse Gas Abatement, Carbon Use and Competition
Nov 2020
Publication
Increasing shares of variable renewable electricity (VRE) generation are necessary for achieving high renewable shares in all energy sectors. This results in increased excess renewable electricity (ERE) at times when supply exceeds demand. ERE can be utilized as a low-emission energy source for sector coupling through hydrogen production via electrolysis which can be used directly or combined with a carbon source to produce electrofuels. Such fuels are crucial for the transport sector where renewable alternatives are scarce. However while ERE increases with raising VRE shares carbon emissions decrease and may become a limited resource with several usage options including carbon storage (CCS). Here we perform a model based analysis for the German case until 2050 with a general analysis for regions with a high VRE reliance. Results indicate that ERE-based electrofuels could achieve a greenhouse gas (GHG) abatement of 74 MtCO2eq yearly (46% of current German transport emissions) by displacing fossil fuels at high fuel-cell electric vehicle (FCEV) shares at a cost of 250–320 V per tCO2eq. The capital expenditure of electrolysers was found not to be crucial for the cost despite low capacity factors due to variable ERE patterns. Carbon will likely become a limiting factor when aiming for stringent climate targets and renewable electricity-based hydrocarbon electrofuels replacing fossil fuels achieve up to 70% more GHG abatement than CCS. Given (1) an unsaturated demand for renewable hydrocarbon fuels (2) a saturated renewable hydrogen demand and (3) unused ERE capacities which would otherwise be curtailed we find that carbon is better used for renewable fuel production than being stored in terms of overall GHG abatement.
Underground Hydrogen Storage: Application of Geochemical Modelling in a Case Study in the Molasse Basin, Upper Austria
Feb 2019
Publication
Hydrogen storage in depleted gas fields is a promising option for the large-scale storage of excess renewable energy. In the framework of the hydrogen storage assessment for the “Underground Sun Storage” project we conduct a multi-step geochemical modelling approach to study fluid–rock interactions by means of equilibrium and kinetic batch simulations. With the equilibrium approach we estimate the long-term consequences of hydrogen storage whereas kinetic models are used to investigate the interactions between hydrogen and the formation on the time scales of typical storage cycles. The kinetic approach suggests that reactions of hydrogen with minerals become only relevant over timescales much longer than the considered storage cycles. The final kinetic model considers both mineral reactions and hydrogen dissolution to be kinetically controlled. Interactions among hydrogen and aqueous-phase components seem to be dominant within the storage-relevant time span. Additionally sensitivity analyses of hydrogen dissolution kinetics which we consider to be the controlling parameter of the overall reaction system were performed. Reliable data on the kinetic rates of mineral dissolution and precipitation reactions specifically in the presence of hydrogen are scarce and often not representative of the studied conditions. These uncertainties in the kinetic rates for minerals such as pyrite and pyrrhotite were investigated and are discussed in the present work. The proposed geochemical workflow provides valuable insight into controlling mechanisms and risk evaluation of hydrogen storage projects and may serve as a guideline for future investigations.
Protocol for Heavy-duty Hydrogen Refueling: A Modelling Benchmark
Sep 2021
Publication
For the successful deployment of the Heavy Duty (HD) hydrogen vehicles an associated infrastructure in particular hydrogen refueling stations (HRS) should be reliable compliant with regulations and optimized to reduce the related costs. FCH JU project PRHYDE aims to develop a sophisticated protocol dedicated to HD applications. The target of the project is to develop protocol and recommendations for an efficient refueling of 350 500 and 700 bar HD tanks of types III and IV. This protocol is based on modeling results as well as experimental data. Different partners of the PRHYDE European project are closely working together on this target. However modeling approaches and corresponding tools must first be compared and validated to ensure the high level of reliability for the modeling results. The current paper presents the benchmark performed in the frame of the project by Air Liquide Engie Wenger Engineering and NREL. The different models used were compared and calibrated to the configurations proposed by the PRHYDE project. In addition several scenarios were investigated to explore different cases with high ambient temperatures.
Planning, Optimisation and Evaluation of Small Power-to-Gas-to-Power Systems: Case Study of a German Dairy
May 2022
Publication
In the course of the energy transition distributed hybrid energy systems such as the combination of photovoltaic (PV) and battery storages is increasingly being used for economic and ecological reasons. However renewable electricity generation is highly volatile and storage capacity is usually limited. Nowadays a new storage component is emerging: the power-to-gas-to-power (PtGtP) technology which is able to store electricity in the form of hydrogen even over longer periods of time. Although this technology is technically well understood and developed there are hardly any evaluations and feasibility studies of its widespread integration into current distributed energy systems under realistic legal and economic market conditions. In order to be able to give such an assessment we develop a methodology and model that optimises the sizing and operation of a PtGtP system as part of a hybrid energy system under current German market conditions. The evaluation is based on a multi-criteria approach optimising for both costs and CO2 emissions. For this purpose a brute-force-based optimal design approach is used to determine optimal system sizes combined with the energy system simulation tool oemof.solph. In order to gain further insights into this technology and its future prospects a sensitivity analysis is carried out. The methodology is used to examine the case study of a German dairy and shows that PtGtP is not yet profitable but promising.
Potential for Hydrogen and Power-to-Liquid in a Low-carbon EU Energy System Using Cost Optimization
Oct 2018
Publication
Hydrogen represents a versatile energy carrier with net zero end use emissions. Power-to-Liquid (PtL) includes the combination of hydrogen with CO2 to produce liquid fuels and satisfy mostly transport demand. This study assesses the role of these pathways across scenarios that achieve 80–95% CO2 reduction by 2050 (vs. 1990) using the JRC-EU-TIMES model. The gaps in the literature covered in this study include a broader spatial coverage (EU28+) and hydrogen use in all sectors (beyond transport). The large uncertainty in the possible evolution of the energy system has been tackled with an extensive sensitivity analysis. 15 parameters were varied to produce more than 50 scenarios. Results indicate that parameters with the largest influence are the CO2 target the availability of CO2 underground storage and the biomass potential.
Hydrogen demand increases from 7 mtpa today to 20–120 mtpa (2.4–14.4 EJ/yr) mainly used for PtL (up to 70 mtpa) transport (up to 40 mtpa) and industry (25 mtpa). Only when CO2 storage was not possible due to a political ban or social acceptance issues was electrolysis the main hydrogen production route (90% share) and CO2 use for PtL became attractive. Otherwise hydrogen was produced through gas reforming with CO2 capture and the preferred CO2 sink was underground. Hydrogen and PtL contribute to energy security and independence allowing to reduce energy related import cost from 420 bln€/yr today to 350 or 50 bln€/yr for 95% CO2 reduction with and without CO2 storage. Development of electrolyzers fuel cells and fuel synthesis should continue to ensure these technologies are ready when needed. Results from this study should be complemented with studies with higher spatial and temporal resolution. Scenarios with global trading of hydrogen and potential import to the EU were not included.
Hydrogen demand increases from 7 mtpa today to 20–120 mtpa (2.4–14.4 EJ/yr) mainly used for PtL (up to 70 mtpa) transport (up to 40 mtpa) and industry (25 mtpa). Only when CO2 storage was not possible due to a political ban or social acceptance issues was electrolysis the main hydrogen production route (90% share) and CO2 use for PtL became attractive. Otherwise hydrogen was produced through gas reforming with CO2 capture and the preferred CO2 sink was underground. Hydrogen and PtL contribute to energy security and independence allowing to reduce energy related import cost from 420 bln€/yr today to 350 or 50 bln€/yr for 95% CO2 reduction with and without CO2 storage. Development of electrolyzers fuel cells and fuel synthesis should continue to ensure these technologies are ready when needed. Results from this study should be complemented with studies with higher spatial and temporal resolution. Scenarios with global trading of hydrogen and potential import to the EU were not included.
Methanol Synthesis Using Captured CO2 as Raw Material: Techno-economic and Environmental Assessment
Aug 2015
Publication
The purpose of this paper is to assess via techno-economic and environmental metrics the production of methanol (MeOH) using H2 and captured CO2 as raw materials. It evaluates the potential of this type of carbon capture and utilisation (CCU) plant on (i) the net reduction of CO2 emissions and (ii) the cost of production in comparison with the conventional synthesis process of MeOH Europe. Process flow modelling is used to estimate the operational performance and the total purchased equipment cost; the flowsheet is implemented in CHEMCAD and the obtained mass and energy flows are utilised as input to calculate the selected key performance indicators (KPIs). CO2 -based metrics are used to assess the environmental impact. The evaluated MeOH plant produces 440 ktMeOH/yr and its configuration is the result of a heat integration process. Its specific capital cost is lower than for conventional plants. However raw materials prices i.e. H2 and captured CO2 do not allow such a project to be financially viable. In order to make the CCU plant financially attractive the price of MeOH should increase in a factor of almost 2 or H2 costs should decrease almost 2.5 times or CO2 should have a value of around 222 €/t under the assumptions of this work. The MeOH CCU-plant studied can utilise about 21.5% of the CO2 emissions of a pulverised coal (PC) power plant that produces 550MWnet of electricity. The net CO2 emissions savings represent 8% of the emissions of the PC plant (mainly due to the avoidance of consuming fossil fuels as in the conventional MeOH synthesis process). The results demonstrate that there is a net but small potential for CO2 emissions reduction; assuming that such CCU plants are constructed in Europe to meet the MeOH demand growth and the quantities that are currently imported the net CO2 emissions reduction could be of 2.71 MtCO2/yr.
Life Cycle Assessment of Hydrogen from Proton Exchange Membrane Water Electrolysis in Future Energy Systems
Jan 2019
Publication
This study discusses the potential of H2 production by proton exchange membrane water electrolysis as an effective option to reduce greenhouse gas emissions in the hydrogen sector. To address this topic a life cycle assessment is conducted to compare proton exchange membrane water electrolysis versus the reference process - steam methane reforming. As a relevant result we show that hydrogen production via proton exchange membrane water electrolysis is a promising technology to reduce CO2 emissions of the hydrogen sector by up to 75% if the electrolysis system runs exclusively on electricity generated from renewable energy sources. In a future (2050) base-load operation mode emissions are comparable to the reference system.
The results for the global warming potential show a strong reduction of greenhouse gas emissions by 2050. The thoroughly and in-depth modelled components of the electrolyser have negligible influence on impact categories; thus emissions are mainly determined by the electricity mix. With 2017 electricity mix of Germany the global warming potential corresponds to 29.5 kg CO2 eq. for each kg of produced hydrogen. Referring to the electricity mix we received from an energy model emissions can be reduced to 11.5 kg CO2 eq. in base-load operation by the year 2050. Using only the 3000 h of excess power from renewables in a year will allow for the reduction of the global warming potential to 3.3 kg CO2 eq. From this result we see that an environmentally friendly electricity mix is crucial for reducing the global warming impact of electrolytic hydrogen.
The results for the global warming potential show a strong reduction of greenhouse gas emissions by 2050. The thoroughly and in-depth modelled components of the electrolyser have negligible influence on impact categories; thus emissions are mainly determined by the electricity mix. With 2017 electricity mix of Germany the global warming potential corresponds to 29.5 kg CO2 eq. for each kg of produced hydrogen. Referring to the electricity mix we received from an energy model emissions can be reduced to 11.5 kg CO2 eq. in base-load operation by the year 2050. Using only the 3000 h of excess power from renewables in a year will allow for the reduction of the global warming potential to 3.3 kg CO2 eq. From this result we see that an environmentally friendly electricity mix is crucial for reducing the global warming impact of electrolytic hydrogen.
Artificial Intelligence-Based Machine Learning toward the Solution of Climate-Friendly Hydrogen Fuel Cell Electric Vehicles
Jul 2022
Publication
The rapid conversion of conventional powertrain technologies to climate-neutral new energy vehicles requires the ramping of electrification. The popularity of fuel cell electric vehicles with improved fuel economy has raised great attention for many years. Their use of green hydrogen is proposed to be a promising clean way to fill the energy gap and maintain a zero-emission ecosystem. Their complex architecture is influenced by complex multiphysics interactions driving patterns and environmental conditions that put a multitude of power requirements and boundary conditions around the vehicle subsystems including the fuel cell system the electric motor battery and the vehicle itself. Understanding its optimal fuel economy requires a systematic assessment of these interactions. Artificial intelligence-based machine learning methods have been emerging technologies showing great potential for accelerated data analysis and aid in a thorough understanding of complex systems. The present study investigates the fuel economy peaks during an NEDC in fuel cell electric vehicles. An innovative approach combining traditional multiphysics analyses design of experiments and machine learning is an effective blend for accelerated data supply and analysis that accurately predicts the fuel consumption peaks in fuel cell electric vehicles. The trained and validated models show very accurate results with less than 1% error.
No more items...