Institution of Gas Engineers & Managers
Vision for a European Metrology Network for Energy Gases
Mar 2022
Publication
As Europe moves towards decarbonising its energy infrastructure new measurement needs will arise that require collaborative efforts between European National Metrology Institutes and Designated Institutes to tackle. Such measurement needs include flow metering of hydrogen or hydrogen enriched natural gas in the gas grid for billing quality assurance of hydrogen at refuelling stations and equations of state for carbon dioxide in carbon capture and storage facilities. The European metrology network for energy gases for the first time provides a platform where metrology institutes can work together to develop a harmonised strategy prioritise new challenges and share expertise and capabilities to support the European energy gas industry to meet stringent EU targets for climate change and emissions reductions
The Potential of Zero-carbon Bunker Fuels in Developing Countries
Apr 2015
Publication
To meet the climate targets set forth in the International Maritime Organization’s Initial GHG Strategy the maritime transport sector needs to abandon the use of fossil-based bunker fuels and turn toward zero-carbon alternatives which emit zero or at most very low greenhouse gas (GHG) emissions throughout their lifecycles. This report “The Potential of Zero-Carbon Bunker Fuels in Developing Countries” examines a range of zero-carbon bunker fuel options that are considered to be major contributors to shipping’s decarbonized future: biofuels hydrogen and ammonia and synthetic carbon-based fuels. The comparison shows that green ammonia and green hydrogen strike the most advantageous balance of favorable features due to their lifecycle GHG emissions broader environmental factors scalability economics and technical and safety implications. Furthermore the report finds that many countries including developing countries are very well positioned to become future suppliers of zero-carbon bunker fuels—namely ammonia and hydrogen. By embracing their potential these countries would be able to tap into an estimated $1+ trillion future fuel market while modernizing their own domestic energy and industrial infrastructure. However strategic policy interventions are needed to unlock these potentials.
Carbon-neutral Cement: The Role of Green Hydrogen
Mar 2024
Publication
Business-as-usual (BAU) cement production is associated with a linear model that contributes significantly to global warming and is dependent on volatile energy markets. A novel circular model is proposed by adding three power-to-gas system components to current production systems: a calcium-looping (CaL) CO2 capture unit; water electrolysis for hydrogen and oxygen generation; and a methanation unit for synthetic natural gas (SNG) production. The paper presents the first analysis of the combined industrial-scale operation of these components in a closed loop where the SNG fuels the cement kiln and the CaL unit while the O2 produced feeds it. The circular hybrid and BAU models are compared in three feasibility scenarios. It is concluded that the circular model outperforms the other alternatives environmentally opening a potential pathway for the cement industry to achieve near net-zero CO2 emissions reduce energy dependence and improve economic efficiency.
Delivering a Reliable Decarbonised Power System
Mar 2023
Publication
This report illustrates what a reliable resilient decarbonised electricity supply system could look like in 2035 and the steps required to achieve it. It provides new insights and new advice on how such a system can be achieved by 2035 using real weather data and hourly analysis of Great Britain’s power system (Northern Ireland is part of the all-Ireland system). It also looks at the implications for hydrogen.
Improvement of MC Method in SAE J2601 Hydrogen Refuelling Protocol Using Dual-zone Dual-Temperature Model
Sep 2023
Publication
The MC method refuelling protocol in SAE J2601 has been published by the Society of Automotive Engineers (SAE) in order to safely and quickly refuel hydrogen vehicles. For the calculation method of the pressure target to control the refuelling stop we introduced a dual-zone dual-temperature model that distinguishes the hydrogen temperature in the tank from the wall temperature to replace the dual-zone single-temperature model of the original MC method. The total amount of heat transferred by convection between hydrogen and the inner tank wall during the filling process was expressed as an equation of final hydrogen temperature final wall temperature final refuelling time tank inner surface area and the correction factor. The correction factor equations were determined by fitting simulation data from the 0D1D model where hydrogen inside the tank is lumped parameter model (0D) and the tank wall is a one-dimensional model (1D). For the correction factor of the linear equation its first-order coefficient and constant term have a linear relationship with the initial pressure of the storage tank and their R2 values obtained from the fitting are greater than 0.99. Finally we derived a new equation to calculate the final hydrogen temperature which can be combined with the 100% SOC inside the vehicle tank to determine the pressure target. The simulation results show that the final SOC obtained are all greater than 96% using the modified pressure target and the correction factor of the linear equation.
China's Hydrogen Development: A Tale of Three Cities
Mar 2023
Publication
China is the world’s largest producer and consumer of hydrogen. The country has adopted a domestic strategy that targets significant growth in hydrogen consumption and production. Given the importance of hydrogen in the low-carbon energy transition it is critical to understand China’s hydrogen policies and their implementation as well as the extent to which these contribute to the country’s low-carbon goals.<br/>Existing research has focused on understanding policies and regulations in China and their implications for the country’s hydrogen prospects. This study aims to improve our understanding of central-government initiatives and look at how China’s hydrogen policies are implemented at the local level. The paper examines the three cities of Zhangjiakou (in China’s renewable-rich Hebei province) Datong (in the country’s coal-heartland of Shanxi province) and Chengdu which is rich in hydropower and natural gas. To be sure the three cities analysed in this paper do not cover all regional plans and initiatives but they offer a useful window into local hydrogen policy implementation. They also illustrate the major challenges facing green hydrogen as it moves beyond the narrow highly subsidized field of fuel cell vehicles (FCVs). Indeed costs as well as water land availability and technology continue to be constraints.<br/>The hydrogen policies and road maps reviewed in this paper offer numerous targets—often setting quantitative goals for FCVs hydrogen refuelling stations hydrogen supply chain revenue and new hydrogen technology companies—aligning with the view that hydrogen development is currently more of an industrial policy than a decarbonisation strategy. Indeed hydrogen’s potential to decarbonise sectors such as manufacturing and chemicals is of secondary importance if mentioned at all. But as the cities analysed here view hydrogen as part of their industrial programmes economic development and climate strategies support is likely to remain significant even as the specific incentive schemes will likely evolve.<br/>Given this local hydrogen development model rising demand for hydrogen in China could ultimately increase rather than decrease CO₂ emissions from fossil fuels in the short run. At the same time even though the central government’s hydrogen targets (as laid out in its 2022 policy documents) seem relatively conservative Chinese cities’ appetite for new sources of growth and the ability to fund various business models are worth watching.
Influence of Longitudinal Wind on Hydrogen Leakage and Hydrogen Concentration Sensor Layout of Fuel Cell Vehicles
Jul 2023
Publication
Hydrogen has the physical and chemical characteristics of being flammable explosive and prone to leakage and its safety is the main issue faced by the promotion of hydrogen as an energy source. The most common scene in vehicle application is the longitudinal wind generated by driving and the original position of hydrogen concentration sensors (HCSs) did not consider the influence of longitudinal wind on the hydrogen leakage trajectory. In this paper the computational fluid dynamics (CFD) software STAR CCM 2021.1 is used to simulate the hydrogen leakage and diffusion trajectories of fuel cell vehicles (FCVs) at five different leakage locations the longitudinal wind speeds of 0 km/h 37.18 km/h and 114 km/h and it is concluded that longitudinal wind prolongs the diffusion time of hydrogen to the headspace and reduces the coverage area of hydrogen in the headspace with a decrease of 81.35%. In order to achieve a good detection effect of fuel cell vehicles within the longitudinal wind scene based on the simulated hydrogen concentration–time matrix the scene clustering method based on vector similarity evaluation was used to reduce the leakage scene set by 33%. Then the layout position of HCSs was optimized according to the proposed multi-scene full coverage response time minimization model and the response time was reduced from 5 s to 1 s.
Optimal Operation and Market Integration of a Hybrid Farm with Green Hydrogen and Energy Storage: A Stochastic Approach Considering Wind and Electricity Price Uncertainties
Mar 2024
Publication
In recent years growing interest has emerged in investigating the integration of energy storage and green hydrogen production systems with renewable energy generators. These integrated systems address uncertainties related to renewable resource availability and electricity prices mitigating profit loss caused by forecasting errors. This paper focuses on the operation of a hybrid farm (HF) combining an alkaline electrolyzer (AEL) and a battery energy storage system (BESS) with a wind turbine to form a comprehensive HF. The HF operates in both hydrogen and day-ahead electricity markets. A linear mathematical model is proposed to optimize energy management considering electrolyzer operation at partial loads and accounting for degradation costs while maintaining a straightforward formulation for power system optimization. Day-ahead market scheduling and real-time operation are formulated as a progressive mixed-integer linear program (MILP) extended to address uncertainties in wind speed and electricity prices through a two-stage stochastic optimization model. A bootstrap sampling strategy is introduced to enhance the stochastic model’s performance using the same sampled data. Results demonstrate how the strategies outperform traditional Monte Carlo and deterministic approaches in handling uncertainties increasing profits up to 4% per year. Additionally a simulation framework has been developed for validating this approach and conducting different case studies.
Risk Management of Energy Communities with Hydrogen Production and Storage Technologies
Jul 2023
Publication
The distributed integration of renewable energy sources plays a central role in the decarbonization of economies. In this regard energy communities arise as a promising entity to coordinate groups of proactive consumers (prosumers) and incentivize investment on clean technologies. However the uncertain nature of renewable energy generation residential loads and trading tariffs pose important challenges both at the operational and economic levels. We study how this management can be directly undertaken by an arbitrageur that making use of an adequate price-based demand response (real-time pricing) system serves as an intermediary with the central electricity market to coordinate different types of prosumers under risk aversion. In particular we consider a sequential futures and spot market where the aggregated shortage or excess of energy within the community can be traded. We aim to study the impact of new hydrogen production and storage technologies on community operation and risk management. These interactions are modeled as a game theoretical setting in the form of a stochastic two-stage bilevel optimization problem which is later reformulated without approximation as a single-level mixed-integer linear problem (MILP). An extensive set of numerical experiments based on real data is performed to study the operation of the energy community under different technical and economical conditions. Results indicate that the optimal involvement in futures and spot markets is highly conditioned by the community’s risk aversion and self-sufficiency levels. Moreover the external hydrogen market has a direct effect on the community’s internal price-tariff system and depending on the market conditions may worsen the utility of individual prosumers.
How Hydrogen (H2) Can Support Food Security: From Farm to Fork
Mar 2024
Publication
Molecular hydrogen (H2 ) is a low-molecular-weight non-polar and electrochemically neutral substance that acts as an effective antioxidant and cytoprotective agent with research into the effects of H2 incorporation into the food chain at various stages rapidly gaining momentum. H2 can be delivered throughout the food growth production delivery and storage systems in numerous ways including as a gas as hydrogen-rich water (HRW) or with hydrogen-donating food supplements such as calcium (Ca) or magnesium (Mg). In plants H2 can be exploited as a seedpriming agent during seed germination and planting during the latter stages of plant development and reproduction as a post-harvest treatment and as a food additive. Adding H2 during plant growth and developmental stages is noted to improve the yield and quality of plant produce through modulating antioxidant pathways and stimulating tolerance to such environmental stress factors as drought stress enhanced tolerance to herbicides (paraquat) and increased salinity and metal toxicity. The benefits of pre- and post-harvest application of H2 include reductions in natural senescence and microbial spoilage which contribute to extending the shelf-life of animal products fruits grains and vegetables. This review collates empirical findings pertaining to the use of H2 in the agri-food industry and evaluates the potential impact of this emerging technology.
Research on Power Optimization for Energy System of Hydrogen Fuel Cell Wheel-Driven Electric Tractor
Apr 2024
Publication
Hydrogen fuel cell tractors are emerging as a new power source for tractors. Currently there is no mature energy management control method available. Existing methods mostly rely on engineers’ experience to determine the output power of the fuel cell and the power battery resulting in relatively low energy utilization efficiency of the energy system. To address the aforementioned problems a power optimization method for the energy system of hydrogen fuel cell wheel-driven electric tractor was proposed. A dynamic model of tractor ploughing conditions was established based on the system dynamics theory. From this based on the equivalent hydrogen consumption theory the charging and discharging of the power battery were equivalent to the fuel consumption of the hydrogen fuel cell forming an equivalent hydrogen consumption model for the tractor. Using the state of charge (SOC) of the power battery as a constraint and with the minimum equivalent hydrogen consumption as the objective function an instantaneously optimized power allocation method based on load demand in the energy system is proposed by using a traversal algorithm. The optimization method was simulated and tested based on the MATLAB simulation platform and the results showed under ploughing conditions compared with the rule-based control strategy the proposed energy system power optimization method optimized the power output of hydrogen fuel cells and power batteries allowing the energy system to work in a high-efficiency range reducing the equivalent hydrogen consumption of the tractor by 7.79% and solving the energy system power distribution problem.
Fluid-dynamics Analyses and Economic Investigation of Offshore Hydrogen Transport via Steel and Composite Pipelines
Apr 2024
Publication
One of the challenges associated with the use of hydrogen is its storage and transportation. Hydrogen pipelines are an essential infrastructure for transporting hydrogen from offshore production sites to onshore distribution centers. This paper presents an innovative analysis of the pressure drops velocity profile and levelized cost of hydrogen (LCOH) in various hydrogen transportation scenarios examining the influence of pipeline type (steel vs. composite) diameter and outlet pressure. The role of the compressor and the pipeline individually and together was assessed for 1000 and 100 tons of hydrogen. Notably the LCOH was highly sensitive to these parameters with the compressor contribution ranging between 21.52% and 85.11% and the pipeline’s share varying from 14.89% to 78.48%. The outflow pressure and diameter of the pipeline have a significant impact on the performance: when 1000 tons of hydrogen is transported the internal pressure drop ranges from 2 to 30 bar and the flow velocity can vary between 2 and 25 m/s. For equivalent hydrogen quantities the composite pipeline exhibits the same trends but with minor variations in the specific values.
Technical Performance and Environmental Assessment of an Ionic Liquid-based CCS Process for Hydrogen Production
Apr 2023
Publication
Hydrogen (H2) production combined with carbon capture and storage (CCS) is anticipated to be an important technology contributing to reduce the carbon footprint of current fossil-based H2 production systems. This work addresses for the first time the techno-environmental assessment of a CCS process based on the ionic liquid [Bmim][Acetate] for H2 production by steam methane reforming (SMR) and the comparison to conventional amine-based systems. Two different SMR plants using MDEA or [Bmim][Acetate] for CO2 capture were rigorously modelled using Aspen Plus to compute material and energy needs and emissions. Literature and simulation results were then used to perform a life cycle impact assessment (LCIA) of these processes based on the ReCiPe model. Solvent synthesis CCS process and hydrogen production stages were considered for the cradle-to-gate analysis. Results showed that although [Bmim][Acetate] is a priori more harmful to the environment than amines (in a kg-to-kg comparison) LCIAs carried out for both CCS processes showed from 5 to 17 % lower environmental impacts values for all estimated categories when using [Bmim][Acetate] due to a 9.4 % more energy-efficient performance than MDEA which also reduced a 17.4 % the total utility cost. Indeed if a typical amine loss rate of 1.6 kg/tCO2 is assumed the values of the environmental impacts increase up to 14 % for the IL-based CCS plant but still maintaining its favorable results over MDEA. As consequence the SMR plant with the IL-based CCS system exhibited 3–20 % lower values for most of the studied impact categories. These results contribute to shed some light on evaluating the sustainability of ILs with respect to conventional solvents for CO2 capture and to guide the synthesis of new more sustainable ILs but also they would be used to compare the environmental burdens from the synthesis and process performance of other promising ILs for CO2 capture that are not environmentally assed yet.
Additive Manufacturing for Proton Exchange Membrane (PEM) Hydrogen Technologies: Merits, Challenges, and Prospects
Jul 2023
Publication
With the growing demand for green technologies hydrogen energy devices such as Proton Exchange Membrane (PEM) fuel cells and water electrolysers have received accelerated developments. However the materials and manufacturing cost of these technologies are still relatively expensive which impedes their widespread commercialization. Additive Manufacturing (AM) commonly termed 3D Printing (3DP) with its advanced capabilities could be a potential pathway to solve the fabrication challenges of PEM parts. Herein in this paper the research studies on the novel AM fabrication methods of PEM components are thoroughly reviewed and analysed. The key performance properties such as corrosion and hydrogen embrittlement resistance of the additively manufactured materials in the PEM working environment are discussed to emphasise their reliability for the PEM systems. Additionally the major challenges and required future developments of AM technologies to unlock their full potential for PEM fabrication are identified. This paper provides insights from the latest research developments on the significance of advanced manufacturing technologies in developing sustainable energy systems to address the global energy challenges and climate change effects.
Efficiency and Optimal Load Capacity of E-Fuel-Based Energy Storage Systems
Apr 2023
Publication
This work evaluates the effectiveness of chemical-based solutions for storing large amounts of renewable electricity. Four “Power-to-X-to-Power” pathways are examined comprising hydrogen methane methanol and ammonia as energy carriers. The pathways are assessed using a model scenario where they are produced with electricity from an onshore wind farm stored in suitable facilities and then reconverted to electricity to meet the energy demand of a chemical site. An energy management and storage capacity estimation tool is used to calculate the annual load coverage resulting from each pathway. All four pathways offer a significant increase in load coverage compared to a scenario without storage solution (56.19%). The hydrogen-based pathway has the highest load coverage (71.88%) and round-trip efficiency (36.93%) followed by the ammonia-based (69.62% 31.37%) methanol-based (67.85% 27.00%) and methane-based (67.64% 26.47% respectively) pathways. The substantially larger storage capacity required for gaseous energy carriers to ensure a steady supply to the consumer could be a decisive factor. The hydrogen pathway requires a storage volume up to 10.93 times larger than ammonia and 16.87 times larger than methanol. Notably ammonia and methanol whose load coverages are only 2.26 and 4.03 percentage points lower than that of hydrogen offer the possibility of implementing site-specific storage solutions avoiding potential bottlenecks due to limited pipeline and cavern capacities.
Massive Green Hydrogen Production Using Solar and Wind Energy: Comparison between Europe and the Middle East
Jul 2023
Publication
This comparative study examines the potential for green hydrogen production in Europe and the Middle East leveraging 3MWp solar and wind power plants. Experimental weather data from 2022 inform the selection of two representative cities namely Krakow Poland (Europe) and Diyala Iraq (Middle East). These cities are chosen as industrial–residential zones representing the respective regions’ characteristics. The research optimizes an alkaline water electrolyzer capacity in juxtaposition with the aforementioned power plants to maximize the green hydrogen output. Economic and environmental factors integral to green hydrogen production are assessed to identify the region offering the most advantageous conditions. The analysis reveals that the Middle East holds superior potential for green hydrogen production compared to Europe attributed to a higher prevalence of solar and wind resources coupled with reduced land and labor costs. Hydrogen production costs in Europe are found to range between USD 9.88 and USD 14.31 per kilogram in contrast to the Middle East where costs span from USD 6.54 to USD 12.66 per kilogram. Consequently the Middle East emerges as a more feasible region for green hydrogen production with the potential to curtail emissions enhance air quality and bolster energy security. The research findings highlight the advantages of the Middle East industrial–residential zone ‘Diyala’ and Europe industrial–residential zone ‘Krakow’ in terms of their potential for green hydrogen production.
Coordinated Planning and Operation of Inter Seasonal Heat Storage and P2G Devices Integrated to Urban Multi-energy System
Mar 2023
Publication
With the urbanization construction and the advancement of the carbon peaking and carbon neutrality goals urban energy systems are characterized by coupling multi-energy networks and a high proportion of renewable energy. Urban energy systems need to improve the quality of energy use as well as to achieve energy conservation and emission reduction. Inter-seasonal heat technology has satisfactory engineering application prospects in promoting renewable energy consumption and the energy supply of urban multi-energy systems. Considering inter-seasonal heat storage and electric hydrogen production a joint optimization method of planning and operation is proposed for the urban multi-energy flow system. First the operation framework of inter-seasonal heat storage and electric hydrogen production system is established which clarifies the energy flow of the urban multi-energy system. Secondly aiming at the goals of minimizing the equipment’s annual investment cost and the multi-energy system annual operation cost combined with the time series period division method a planning operation model has been established considering multi-objectives. Through case study it is shown that the proposed model can promote the renewable energy consumption and reduce the operation cost of the whole system.
THyGA - Test Report on Mitigation Solutions for Residential Natural Gas Appliances Not Designed for Hydrogen Admixture
Apr 2023
Publication
This report from the WP5 “Mitigation” provides information and test results regarding perturbations that hydrogen could cause to gas appliances when blended to natural gas especially on anatural draught for exhaust fumes or acidity for the condensates. The important topic of on-site adjustment is also studied with test results on alternative technologies and proposals of mitigation approaches.
Emerging Borophene Two-dimensional Nanmaterials for Hydrogen Storage
May 2023
Publication
The growing demand for energy and the need to reduce the carbon footprint has made green hydrogen a promising alternative to traditional fossil fuels. Green hydrogen is produced using renewable energy sources making it a sustainable and environmentally friendly energy source. Solid-state hydrogen storage aims to store hydrogen in a solid matrix offering potential advantages such as higher safety and improved energy density compared to traditional storage methods such as compressed gas or liquid hydrogen. However the development of efficient and economically viable solid-state storage materials is still a challenge and research continues in this field. Borophene is a two-dimensional material that offers potential as an intermediate hydrogen storage material due to its moderate binding energy and reversible behavior. Its unique geometry and electronic properties also allow for higher hydrogen adsorption capacity than metal-based complex hydrides surpassing the goals set by the U.S. Department of Energy. Borophene has shown great potential for hydrogen storage but it is still not practical for commercial use. In this review borophene nanomaterials chemical and physical properties are discussed related to hydrogen storage and binding energy. The importance of borophene for hydrogen storage the challenges it faces and its future prospects are also being discussed.
A Techno-economic Analysis of Cross-regional Renewable Hydrogen Supply Routes in China
Jun 2023
Publication
The cross-regional renewable hydrogen supply is significant for China to resolve the uneven distribution of renewable energy and decarbonize the transportation sector. Yet the economic comparison of various hydrogen supply routes remains obscure. This paper conducts a techno-economic analysis on six hydrogen supply routes for hydrogen refueling stations including gas-hydrogen tube-trailer gas-hydrogen pipeline liquid-hydrogen truck natural gas pipeline MeOH truck and NH3 truck. Furthermore the impacts of three critical factors are examined including electrolyzer selection transportation distance and electricity price. The results indicate that with a transport distance of 2000 km the natural gas pipeline route offers the lowest cost while the gas-hydrogen tube-trailer route is not economically feasible. The gas-hydrogen pipeline route shows outstanding cost competitiveness between 200 and 2000 km while it is greatly influenced by the utilization rate. The liquid-hydrogen truck route demonstrates great potential with the electricity price decreasing. This study may provide guidance for the development of the cross-regional renewable hydrogen supply for hydrogen refueling stations in China.
No more items...