Applications & Pathways
The Effect of Explosions on the Protective Wall of a Containerized Hydrogen Fuel Cell System
Jun 2023
Publication
With the development of hydrogen energy containerized hydrogen fuel cell systems are being used in distributed energy-supply systems. Hydrogen pipelines and electronic equipment of fuel cell containers can trigger hydrogen-explosion accidents. In the present study Computational Fluid Dynamics (CFD) software was used to calculate the affected areas of hydrogen fuel cell container-explosion accidents with and without protective walls. The protective effects were studied for protective walls at various distances and heights. The results show that strategically placing protective walls can effectively block the propagation of shock waves and flames. However the protective wall has a limited effect on the reduction of overpressure and temperature behind the wall when the protective wall is insufficiently high. Reflected explosion shock waves and flames will cause damage to the area inside the wall when the protective wall is too close to the container. In this study a protective wall that is 5 m away from the container and 3 m high can effectively protect the area behind the wall and prevent damage to the container due to the reflection of shock waves and flame. This paper presents a suitable protective wall setting scheme for hydrogen fuel cell containers.
Development of a Fuel Cell-based System for Refrigerated Transport
Nov 2012
Publication
Benchmark refrigerated systems in the road transportation sector are powered by diesel having operation costs of up to 6000 €/y. This paper presents the development of an alternative refrigeration system based on fuel cells with higher efficiency reduced costs and independent of diesel price fluctuations. Energy load profiles have been analyzed and the fuel cell stack and auxiliaries are being modeled in order to dimension and design a balance of plant and control algorithms that ensure a safe and easy utilization. Additionally a prototype shall be tested under different load profiles to validate the control strategies and to characterize the performance of the system.
Sustainable Fuel Production Using In-situ Hydrogen Supply via Aqueous Phase Reforming: A Techno-economic and Life-cycle Greenhouse Gas Emissions Assessment
Jul 2023
Publication
Sustainable aviation fuel (SAF) production is one of the strategies to guarantee an environmental-friendly development of the aviation sector. This work evaluates the technical economic and environmental feasibility of obtaining SAFs by hydrogenation of vegetable oils thanks to in-situ hydrogen production via aqueous phase reforming (APR) of glycerol by-product. The novel implementation of APR would avoid the environmental burden of conventional fossil-derived hydrogen production as well as intermittency and storage issues related to the use of RES-based (renewable energy sources) electrolysers. The conceptual design of a conventional and advanced (APR-aided) biorefinery was performed considering a standard plant capacity equal to 180 ktonne/y of palm oil. For the advanced scenario the feed underwent hydrolysis into glycerol and fatty acids; hence the former was subjected to APR to provide hydrogen which was further used in the hydrotreatment reactor where the fatty acids were deoxygenated. The techno-economic results showed that APR implementation led to a slight increase of the fixed capital investment by 6.6% compared to the conventional one while direct manufacturing costs decreased by 22%. In order to get a 10% internal rate of return the minimum fuel selling price was found equal to 1.84 $/kg which is 17% lower than the one derived from conventional configurations (2.20 $/kg). The life-cycle GHG emission assessment showed that the carbon footprint of the advanced scenario was equal to ca. 12 g CO2/MJSAF i.e. 54% lower than the conventional one (considering an energy-based allocation). The sensitivity analysis pointed out that the cost of the feedstock SAF yield and the chosen plant size are keys parameters for the marketability of this biorefinery while the energy price has a negligible impact; moreover the source of hydrogen has significant consequences on the environmental footprint of the plant. Finally possible uncertainties for both scenarios were undertaken via Monte Carlo simulations.
Research on the Technical Scheme of Multi-stack Common Rail Fuel Cell Engine Based on the Demand of Commercial Vehicle
Feb 2024
Publication
At present most fuel cell engines are single-stack systems and high-power single-stack systems have bottlenecks in meeting the power requirements of heavy-duty trucks mainly because the increase in the single active area and the excessive number of cells will lead to poor distribution uniformity of water gas and heat in the stack which will cause local attenuation and reduce the performance of the stack. This paper introduces the design concept of internal combustion engine takes three-stack fuel cell engine as an example designs multi-stack fuel cell system scheme and serialized high-voltage scheme. Through Intelligent control technology of independent hydrogen injection based on multi-stack coupling the hydrogen injection inflow of each stack is controlled online according to the real-time anode pressure to achieve accurate fuel injection of a single stack and ensure the consistency between multiple stacks. proves the performance advantage of multi-stack fuel cell engine through theoretical designintelligent control and test verification and focuses on analyzing the key technical problems that may exist in multi-stack consistency. The research results provide a reference for the design of multi-stack fuel cell engines and have important reference value for the powertrain design of long-distance heavy-duty and high-power fuel cell trucks.
The Economic Impact and Carbon Footprint Dependence of Energy Management Strategies in Hydrogen-Based Microgrids
Sep 2023
Publication
This paper presents an economic impact analysis and carbon footprint study of a hydrogenbased microgrid. The economic impact is evaluated with respect to investment costs operation and maintenance (O&M) costs as well as savings taking into account two different energy management strategies (EMSs): a hydrogen-based priority strategy and a battery-based priority strategy. The research was carried out in a real microgrid located at the University of Huelva in southwestern Spain. The results (which can be extrapolated to microgrids with a similar architecture) show that although both strategies have the same initial investment costs (EUR 52339.78) at the end of the microgrid lifespan the hydrogen-based strategy requires higher replacement costs (EUR 74177.4 vs. 17537.88) and operation and maintenance costs (EUR 35254.03 vs. 34877.08) however it provides better annual savings (EUR 36753.05 vs. 36282.58) and a lower carbon footprint (98.15% vs. 95.73% CO2 savings) than the battery-based strategy. Furthermore in a scenario where CO2 emission prices are increasing the hydrogen-based strategy will bring even higher annual cost savings in the coming years.
Electrochemical Devices to Power a Sustainable Energy Transition—An Overview of Green Hydrogen Contribution
Mar 2024
Publication
This work discusses the current scenario and future growth of electrochemical energy devices such as water electrolyzers and fuel cells. It is based on the pivotal role that hydrogen can play as an energy carrier to replace fossil fuels. Moreover it is envisaged that the scaled-up and broader deployment of the technologies can hold the potential to address the challenges associated with intermittent renewable energy generation. From a sustainability perspective this synergy between hydrogen and electricity from renewable sources is particularly attractive: electrolyzers convert the excess energy from renewables into green hydrogen and fuel cells use this hydrogen to convert it back into electricity when it is needed. Although this transition endorses the ambitious goal to supply greener energy for all it also entails increased demand for the materials that are essential for developing such cleaner energy technologies. Herein several economic and environmental issues are highlighted besides a critical overview regarding each technology. The aim is to raise awareness and provide the reader (a non-specialist in the field) with useful resources regarding the challenges that need to be overcome so that a green hydrogen energy transition and a better life can be fully achieved.
Decarbonising the Refinery Sector: A Socio-technical Analysis of Advanced Biofuels, Green Hydrogen and Carbon Capture and Storage Developments in Sweden
Nov 2021
Publication
The oil refinery industry is one of the major energy users and responsible for a large proportion of greenhouse gas (GHG) emissions. This sector is facing multiple sustainability-related transformation pressures forcing the industry to adapt to changing market conditions. The transition to a low-carbon economy will require oil refineries to adopt decarbonisation technologies like advanced biofuels green hydrogen and carbon capture and storage (CCS). However the development and implementation of these technologies is not a straightforward process and may be inhibited by lock-in and path dependency. This paper draws on expert interviews and combines the Technological Innovation Systems (TIS) and Multi-level Perspective (MLP) frameworks to examining the niche level development of three emerging technologies in the context of deep decarbonisation of refinery. This research finds that the development of the three decarbonisation technologies shares some of the challenges and opportunities and exhibits technology interdependency to some extent. Among the three TISs advanced biofuel is the most mature in terms of knowledge base actor-network legislation framework and market function. Green hydrogen and CCS encounter stronger momentum than before and can benefit from possible synergies across various sectors. However the analysis also reveals the lack of market formation mainly due to the lack of policy instruments for niche markets. Here policy recommendations for accelerating deep decarbonisation of the oil refinery industry are discussed. Finally we contribute to the sustainability transitions literature by exploring the dynamics of emerging TISs for industrial decarbonisation.
Advances in Hydrogen-Powered Trains: A Brief Report
Sep 2023
Publication
The majority of rail vehicles worldwide use diesel as a primary fuel source. Diesel engine carbon emissions harm the environment and human health. Although railway electrification can reduce emissions it is not always the most economical option especially on routes with low vehicle demand. As a result interest in hydrogen-powered trains as a way to reduce greenhouse gas (GHG) emissions has steadily grown in recent years. In this paper we discuss advancements made in hydrogen-powered freight and commuter trains as well as the technology used in some aspects of hydrogen-powered vehicles. It was observed that hydrogen-powered trains are already in use in Europe and Asia unlike most developing countries in Africa. Commuter trains have received most of the research and development (R&D) attention but interest in hydrogen-powered freight trains has recently picked up momentum. Despite the availability and use of gray and blue hydrogen green hydrogen is still the preferred fuel for decarbonizing the rail transport sector.
The Heat Transfer Potential of Compressor Vanes on a Hydrogen Fueled Turbofan Engine
Sep 2023
Publication
Hydrogen is a promising fuel for future aviation due to its CO2-free combustion. In addition its excellent cooling properties as it is heated from cryogenic conditions to the appropriate combustion temperatures provides a multitude of opportunities. This paper investigates the heat transfer potential of stator surfaces in a modern high-speed low-pressure compressor by incorporating cooling channels within the stator vane surfaces where hydrogen is allowed to flow and cool the engine core air. Computational Fluid Dynamics simulations were carried out to assess the aerothermal performance of this cooled compressor and were compared to heat transfer correlations. A core air temperature drop of 9.5 K was observed for this cooling channel design while being relatively insensitive to the thermal conductivity of the vane and cooling channel wall thickness. The thermal resistance was dominated by the air-side convective heat transfer and more surface area on the air-side would therefore be required in order to increase overall heat flow. While good agreement with established heat transfer correlations was found for both turbulent and transitional flow the correlation for the transitional case yielded decent accuracy only as long as the flow remains attached and while transition was dominated by the bypass mode. A system level analysis indicated a limited but favorable impact at engine performance level amounting to a specific fuel consumption improvement of up to 0.8% in cruise and an estimated reduction of 3.6% in cruise NOx. The results clearly show that although it is possible to achieve high heat transfer rate per unit area in compressor vanes the impact on cycle performance is constrained by the limited available wetted area in the low-pressure compressor.
Carbon Footprint of Hydrogen-powered Inland Shipping: Impacts and Hotspots
Aug 2023
Publication
The shipping sector is facing increasing pressure to implement clean fuels and drivetrains. Especially hydrogen fuel cell drivetrains seem attractive. Although several studies have been conducted to assess the carbon footprint of hydrogen and its application in ships their results remain hard to interpret and compare. Namely it is necessary to include a variety of drivetrain solutions and different studies are based on various assumptions and are expressed in other units. This paper addresses this problem by offering a three-step meta-review of life cycle assessment studies. First a literature review was conducted. Second results from the literature were harmonized to make the different analyses comparable serving cross-examination. The entire life cycle of both the fuels and drivetrains were included. The results showed that the dominant impact was fuel use and related fuel production. And finally life-cycle hot spots have been identified by looking at the effect of specific configurations in more detail. Hydrogen production by electrolysis powered by wind has the most negligible impact. For this ultra-low carbon pathway the modes of hydrogen transport and the use of specific materials and components become relevant.
Proposal of Zero-Emission Tug in South Korea Using Fuel Cell/Energy Storage System: Economic and Environmental Long-Term Impacts
Mar 2023
Publication
This study presents the results of economic and environmental analysis for two types of zero-emission ships (ZESs) that are receiving more attention to meet strengthened environmental regulations. One of the two types of ZES is the ZES using only the energy storage system (All-ESS) and the other is the ZES with fuel cell and ESS hybrid system (FC–ESS). The target ship is a tug operating in South Korea and the main parameters are based on the specific circumstances of South Korea. The optimal capacity of the ESS for each proposed system is determined using an optimization tool. The total cost for a ship’s lifetime is calculated using economic analysis. The greenhouse gas (GHG) emission for the fuel’s lifecycle (well-to-wake) is calculated using environmental analysis. The results reveal that the proposed ZESs are 1.7–3.4 times more expensive than the conventional marine gas oil (MGO)-fueled ship; however it could be reduced by 1.3–2.4 times if the carbon price is considered. The proposed ZESs have 58.7–74.3% lower lifecycle GHG emissions than the one from the conventional ship. The results also highlight that the electricity- or hydrogen-based ZESs should reduce GHG emissions from the upstream phase (well-to-tank) to realize genuine ZESs.
Techno-economic Feasibility of Distributed Waste-to-hydrogen Systems to Support Green Transport in Glasgow
Mar 2022
Publication
Distributed waste-to-hydrogen (WtH) systems are a potential solution to tackle the dual challenges of sustainable waste management and zero emission transport. Here we propose a concept of distributed WtH systems based on gasification and fermentation to support hydrogen fuel cell buses in Glasgow. A variety of WtH scenarios were configured based on biomass waste feedstock hydrogen production reactors and upstream and downstream system components. A cost-benefit analysis (CBA) was conducted to compare the economic feasibility of the different WtH systems with that of the conventional steam methane reforming-based method. This required the curation of a database that included inter alia direct cost data on construction maintenance operations infrastructure and storage along with indirect cost data comprising environmental impacts and externalities cost of pollution carbon taxes and subsidies. The levelized cost of hydrogen (LCoH) was calculated to be 2.22 GB P/kg for municipal solid waste gasification and 2.02 GB P/kg for waste wood gasification. The LCoHs for dark fermentation and combined dark and photo fermentation systems were calculated to be 2.15 GB P/kg and 2.29 GB P/kg. Sensitivity analysis was conducted to identify the most significant influential factors of distributed WtH systems. It was indicated that hydrogen production rates and CAPEX had the largest impact for the biochemical and thermochemical technologies respectively. Limitations including high capital expenditure will require cost reduction through technical advancements and carbon tax on conventional hydrogen production methods to improve the outlook for WtH development.
Internal Combustion Engines and Carbon-Neutral Fuels: A Perspective on Emission Neutrality in the European Union
Mar 2024
Publication
Nowadays there is an intense debate in the European Union (EU) regarding the limits to achieve the European Green Deal to make Europe the first climate-neutral continent in the world. In this context there are also different opinions about the role that thermal engines should play. Furhermore there is no clear proposal regarding the possibilities of the use of green hydrogen in the transport decarbonization process even though it should be a key element. Thus there are still no precise guidelines regarding the role of green hydrogen with it being exclusively used as a raw material to produce E-fuels. This review aims to evaluate the possibilities of applying the different alternative technologies available to successfully complete the process already underway to achieve Climate Neutrality by about 2050 depending on the maturity of the technologies currently available and those anticipated to be available in the coming decades.
Analysis of a Distributed Green Hydrogen Infrastructure Designed to Support the Sustainable Mobility of a Heavy-duty Fleet
Aug 2023
Publication
Clean hydrogen is a key pillar for the net zero economy which can be deployed by consistent utilization on heavy-duty transport. This study investigates a distributed green hydrogen infrastructure (DHI) for heavy-duty transportation consisting of on-site hydrogen production storage compression and refueling systems in Italy. Two options for energy supply are analyzed: grid connection using green energy via Power Purchasing Agreements (PPAs) and direct connection to the photovoltaic field respectively. Radiation data are representative of the three main Italian areas namely South (Catania) Center (Roma) and North (Milano). The sensitivity analysis varies the PPA value between 50 V/MWh and 200 V/MWh and the water electrolysis capacity factor between 20% and 100%. The study finds that the LCOH ranges from 7.4 V/kgH2 to 67.8 V/kgH2 for the first option and 5.5 V/kgH2 to 27.5 V/kgH2 for the second option with Southern Italy having the lowest LCOH due to higher solar irradiation. The research shows that a DHI can offer economic and technical benefits for heavy-duty mobility. However the performance is highly influenced by external conditions such as hydrogen demand and electricity prices. This study provides valuable insights into designing and operating a DHI for heavy-duty mobility promoting a carbon-free society.
Fuel Cell-based Hybrid Electric Vehicles: An Integrated Review of Current Status, Key Challenges, Recommended Policies, and Future Prospects
Aug 2023
Publication
Battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) whose exhaust pipes emit nothing are examples of zero-emission automobiles. FCEVs should be considered an additional technology that will help battery-powered vehicles to reach the aspirational goal of zero-emissions electric mobility particularly in situations where the customers demand for longer driving ranges and where using batteries would be insufficient due to bulky battery trays and time-consuming recharging. This study stipulates a current evaluation of the status of development and challenges related to (i) research gap to promote fuel-cell based HEVs (ii) key barriers of fuel-cell based HEVs (iii) advancement of electric mobility and their power drive (iv) electrochemistry of fuel cell technology for FCEVs (v) power transformation topologies communication protocols and advanced charging methods (vi) recommendations and future prospects of fuel-cell HEVs and (vii) current research trends of EVs and FCEVs. This article discusses key challenges with fuel cell electric mobility such as low fuel cell performance cold starts problems with hydrogen storage cost-reduction safety concerns and traction systems. The operating characteristics and applications of several fuel-cell technologies are investigated for FCEVs and FCHEVs. An overview of the fuel cell is provided which serves as the primary source of energy for FCHEVs along with comparisons and its electrochemistry. The study of power transformation topologies communication protocols and enhanced charging techniques for FCHEVs has been studied analytically. Recent technology advancements and the prospects for FCHEVs are discussed in order to influence the future vehicle market and to attain the aim of zero emissions.
Alternative Gaseous Fuels for Marine Vessels towards Zero-Carbon Emissions
Nov 2023
Publication
The maritime industry is recognized as a major pollution source to the environment. The use of low- or zero-carbon marine alternative fuel is a promising measure to reduce emissions of greenhouse gases and toxic pollutants leading to net-zero carbon emissions by 2050. Hydrogen (H2 ) fuel cells particularly proton exchange membrane fuel cell (PEMFC) and ammonia (NH3 ) are screened out to be the feasible marine gaseous alternative fuels. Green hydrogen can reduce the highest carbon emission which might amount to 100% among those 5 types of hydrogen. The main hurdles to the development of H2 as a marine alternative fuel include its robust and energy-consuming cryogenic storage system highly explosive characteristics economic transportation issues etc. It is anticipated that fossil fuel used for 35% of vehicles such as marine vessels automobiles or airplanes will be replaced with hydrogen fuel in Europe by 2040. Combustible NH3 can be either burned directly or blended with H2 or CH4 to form fuel mixtures. In addition ammonia is an excellent H2 carrier to facilitate its production storage transportation and usage. The replacement of promising alternative fuels can move the marine industry toward decarbonization emissions by 2050.
An Exploration of Safety Measures in Hydrogen Refueling Stations: Delving into Hydrogen Equipment and Technical Performance
Feb 2024
Publication
The present paper offers a thorough examination of the safety measures enforced at hydrogen filling stations emphasizing their crucial significance in the wider endeavor to advocate for hydrogen as a sustainable and reliable substitute for conventional fuels. The analysis reveals a wide range of crucial safety aspects in hydrogen refueling stations including regulated hydrogen dispensing leak detection accurate hydrogen flow measurement emergency shutdown systems fire-suppression mechanisms hydrogen distribution and pressure management and appropriate hydrogen storage and cooling for secure refueling operations. The paper therefore explores several aspects including the sophisticated architecture of hydrogen dispensers reliable leak-detection systems emergency shut-off mechanisms and the implementation of fire-suppression tactics. Furthermore it emphasizes that the safety and effectiveness of hydrogen filling stations are closely connected to the accuracy in the creation and upkeep of hydrogen dispensers. It highlights the need for materials and systems that can endure severe circumstances of elevated pressure and temperature while maintaining safety. The use of sophisticated leak-detection technology is crucial for rapidly detecting and reducing possible threats therefore improving the overall safety of these facilities. Moreover the research elucidates the complexities of emergency shut-off systems and fire-suppression tactics. These components are crucial not just for promptly managing hazards but also for maintaining the station’s structural soundness in unanticipated circumstances. In addition the study provides observations about recent technical progress in the industry. These advances effectively tackle current safety obstacles and provide the foundation for future breakthroughs in hydrogen fueling infrastructure. The integration of cutting-edge technology and materials together with the development of upgraded safety measures suggests a positive trajectory towards improved efficiency dependability and safety in hydrogen refueling stations.
Study on the Application of a Multi-Energy Complementary Distributed Energy System Integrating Waste Heat and Surplus Electricity for Hydrogen Production
Feb 2024
Publication
To improve the recovery of waste heat and avoid the problem of abandoning wind and solar energy a multi-energy complementary distributed energy system (MECDES) is proposed integrating waste heat and surplus electricity for hydrogen storage. The system comprises a combined cooling heating and power (CCHP) system with a gas engine (GE) solar and wind power generation and miniaturized natural gas hydrogen production equipment (MNGHPE). In this novel system the GE’s waste heat is recycled as water vapor for hydrogen production in the waste heat boiler while surplus electricity from renewable sources powers the MNGHPE. A mathematical model was developed to simulate hydrogen production in three building types: offices hotels and hospitals. Simulation results demonstrate the system’s ability to store waste heat and surplus electricity as hydrogen thereby providing economic benefit energy savings and carbon reduction. Compared with traditional energy supply methods the integrated system achieves maximum energy savings and carbon emission reduction in office buildings with an annual primary energy reduction rate of 49.42–85.10% and an annual carbon emission reduction rate of 34.88–47.00%. The hydrogen production’s profit rate is approximately 70%. If the produced hydrogen is supplied to building through a hydrogen fuel cell the primary energy reduction rate is further decreased by 2.86–3.04% and the carbon emission reduction rate is further decreased by 12.67–14.26%. This research solves the problem of waste heat and surplus energy in MECDESs by the method of hydrogen storage and system integration. The economic benefits energy savings and carbon reduction effects of different building types and different energy allocation scenarios were compared as well as the profitability of hydrogen production and the factors affecting it. This has a positive technical guidance role for the practical application of MECDESs.
Performance Evaluation of Renewable Energy Systems: Photovoltaic, Wind Turbine, Battery Bank, and Hydrogen Storage
Sep 2023
Publication
The analysis aims to determine the most efficient and cost-effective way of providing power to a remote site. The two primary sources of power being considered are photovoltaics and small wind turbines while the two potential storage media are a battery bank and a hydrogen storage fuel cell system. Subsequently the hydrogen is stored within a reservoir and employed as required by the fuel cell. This strategy offers a solution for retaining surplus power generated during peak production phases subsequently utilizing it during periods when the renewable power sources are generating less power. To evaluate the performance of the hydrogen storage system the analysis included a sensitivity analysis of the wind speed and the cost of the hydrogen subsystem. In this analysis the capital and replacement costs of the electrolyzer and hydrogen storage tank were linked to the fuel cell capital cost. As the fuel cell cost decreases the cost of the electrolyzer and hydrogen tank also decreases. The optimal system type graph showed that the hydrogen subsystem must significantly decrease in price to become competitive with the battery bank.
Hydrogen Fuel Cell as an Electric Generator: A Case Study for a General Cargo Ship
Feb 2024
Publication
In this study real voyage data and ship specifications of a general cargo ship are employed and it is assumed that diesel generators are replaced with hydrogen proton exchange membrane fuel cells. The effect of the replacement on CO2 NOX SOX and PM emissions and the CII value is calculated. Emission calculations show that there is a significant reduction in emissions when hydrogen fuel cells are used instead of diesel generators on the case ship. By using hydrogen fuel cells there is a 37.4% reduction in CO2 emissions 32.5% in NOX emissions 37.3% in SOX emissions and 37.4% in PM emissions. If hydrogen fuel cells are not used instead of diesel generators the ship will receive an A rating between 2023 and 2026 a B rating in 2027 a C rating in 2028–2029 and an E rating in 2030. On the other hand if hydrogen fuel cells are used the ship will always remain at an A rating between 2023 and 2030. The capital expenditure (CAPEX) and operational expenditure (OPEX) of the fuel cell system are USD 1305720 and USD 2470320 respectively for a 15-year lifetime and the hydrogen fuel expenses are competitive at USD 260981 while marine diesel oil (MDO) fuel expenses are USD 206435.
Decarbonizing Combustion with Hydrogen Blended Fuels: An Exploratory Study of Impact of Hydrogen on Hydrocarbon Autoignition
Jan 2024
Publication
Blending hydrogen to existing fuel mix represents a major opportunity for decarbonisation. One important consideration for this application is the chemical interaction between hydrogen and hydrocarbon fuels arising from their different combustion chemistries and varying considerably with combustion processes. This paper conducted an exploratory study of hydrogen’s impact on autoignition in several combustion processes where hydrogen is used as a blending component or the main fuel. Case studies are presented for spark ignition engines (H2/natural gas) compression ignition engines (H2/diesel) moderate or intense low-oxygen dilution (MILD) combustors (H2/natural gas) and rotational detonation engines (H2/natural gas). Autoignition reactivity as a function of the hydrogen blending level is investigated numerically using the ignition delay iso-contours and state-of-the-art kinetic models at time scales representative of each application. The results revealed drastically different impact of hydrogen blending on autoignition due to different reaction temperature pressure and time scale involved in these applications leaving hydrocarbon interacting with hydrogen at different ignition branches where the negative pressure/temperature dependency of oxidation kinetics could take place. The resulted non-linear and at times non-monotonic behaviours indicate a rich topic for combustion chemistry and also demonstrates ignition delay iso-contour as a useful tool to scope autoignition reactivity for a wide range of applications.
Low-carbon Economy Dispatching of Integrated Energy System with P2G-HGT Coupling Wind Power Absorption Based on Stepped Carbon Emission Trading
Aug 2023
Publication
To improve the renewable energy consumption capacity of integrated energy system (IES) and reduce the carbon emission level of the system a low-carbon economic dispatch model of IES with coupled power-to-gas (P2G) and hydrogen-doped gas units (HGT) under the stepped carbon trading mechanism is proposed. On the premise of wind power output uncertainty the operating characteristics of the coupled electricity-to-gas equipment in the system are used to improve the wind abandonment problem of IES and increase its renewable energy consumption capacity; HGT is introduced to replace the traditional combustion engine for energy supply and on the basis of refined P2G a part of the volume fraction of hydrogen obtained from the production is extracted and mixed with methane to form a gas mixture for HGT combustion so as to improve the low-carbon economy of the system. The ladder type carbon trading mechanism is introduced into IES to guide the system to control carbon emission behavior and reduce the carbon emission level of IES. Based on this an optimal dispatching strategy is constructed with the economic goal of minimizing the sum of system operation cost wind abandonment cost carbon trading cost and energy purchase cost. After linearization of the established model and comparison analysis by setting different scenarios the wind power utilization rate of the proposed model is increased by 24.5% and the wind abandonment cost and CO2 emission are reduced by 86.3% and 10.5% respectively compared with the traditional IES system which achieves the improvement of renewable energy consumption level and low carbon economy.
Energy Efficiency Analysis of a Fuel Cell Bus Model Using Real Scenarios Generated by Data Collection
Feb 2024
Publication
Modernizing public transportation is crucial given the ongoing call for sustainable mobility. Growing concerns about climate change and the increasingly stringent emissions standards have compelled public transport operators to embrace alternative propulsion vehicles on a broader scale. For the past years the Battery Electric Buses (BEBs) have been the vehicle of choice for public transportation. However an emerging contender in this sector is the Fuel Cell Electric Bus (FCEB). This paper aims to evaluate the way one such vehicle would perform in terms of energy efficiency while being exploited in an urban scenario generated from collected data.
Hydrogen Station Prognostics and Health Monitoring Model
Aug 2023
Publication
Hydrogen fuel has shown promise as a clean alternative fuel aiding in the reduction of fossil fuel dependence within the transportation sector. However hydrogen refueling stations and infrastructure remains a barrier and are a prerequisite for consumer adoption of low-cost and low-emission fuel cell electric vehicles (FCEVs). The costs for FCEV fueling include both station capital costs and operation and maintenance (O&M) costs. Contributing to these O&M costs unscheduled maintenance is presently more costly and more frequent than for similar gasoline fueling infrastructure and is asserted to be a limiting factor in achieving FCEV customer acceptance and cost parity. Unscheduled maintenance leads to longer station downtime therefore causing an increase in missed fueling opportunities which forces customers to seek refueling at other operable stations that may be significantly farther away. This research proposes a framework for a hydrogen station prognostics health monitoring (H2S PHM) model that can minimize unexpected downtime by predicting the remaining useful life for primary hydrogen station components within the major station subsystems. The H2S PHM model is a data-driven statistical model based on O&M data collected from 34 retail hydrogen stations located in the U.S. The primary subcomponents studied are the dispenser compressor and chiller. The remaining useful life calculations are used to decide whether or not maintenance should be completed based on the prediction and expected future station use. This paper presents the background method and results for the H2S PHM model as for a means for improving station availability and customer confidence in FCEVs and hydrogen infrastructure
Explaining Varying Speeds of Low-carbon Reorientation in the United Kingdom's Steel, Petrochemical, and Oil Refining Industries: A Multi-dimensional Comparative Analysis and Outlook
Feb 2024
Publication
Accelerated decarbonisation of steelmaking oil refining and petrochemical industries is essential for climate change mitigation. Drawing on three longitudinal case studies of these industries in the UK this synthesis article makes a comparative analysis of their varying low-carbon reorientation speeds. The paper uses the triple embeddedness framework to analyse five factors (policy support international competition financial health technical feasibility corporate strategy and mindset) that explain why UK oil refineries have in recent years been comparatively the fastest in their low-carbon reorientation and UK steelmakers the slowest. We find that policy support has been more beneficial for refining and petrochemicals than for steel although recent government deals with steelmakers addressed this imbalance. International competition has been high for steel and petrochemicals and comparatively lower for refining (meaning that decarbonisation costs are less detrimental for international competitiveness). Financial performance has comparatively been worst for steel and best for oil refining which shapes the economic feasibility of low-carbon options. Hydrogen and carbon-capture-and-storage are technologically feasible for refining and petrochemicals while Electric Arc Furnaces are technically feasible for steelmakers but face wider feasibility problems (with scrap steel supply electricity grids and electricity prices) which is why we question the recent government deals. Corporate strategy and perceptions changed in oil refining with firms seeing economic opportunities in decarbonisation while steelmakers and petrochemical firms still mostly see decarbonisation as a burden and threat. The paper ends with comparative conclusions a discussion of political considerations and future outlooks for the three UK industries policy and research.
Hydrogen-Powered Vehicles: Comparing the Powertrain Efficiency and Sustainability of Fuel Cell versus Internal Combustion Engine Cars
Feb 2024
Publication
Due to the large quantities of carbon emissions generated by the transportation sector cleaner automotive technologies are needed aiming at a green energy transition. In this scenario hydrogen is pointed out as a promising fuel that can be employed as the fuel of either a fuel cell or an internal combustion engine vehicle. Therefore in this work we propose the design and modeling of a fuel cell versus an internal combustion engine passenger car for a driving cycle. The simulation was carried out using the quasistatic simulation toolbox tool in Simulink considering the main powertrain components for each vehicle. Furthermore a brief analysis of the carbon emissions associated with the hydrogen production method is addressed to assess the clean potential of hydrogen-powered vehicles compared to conventional fossil fuel-fueled cars. The resulting analysis has shown that the hydrogen fuel cell vehicle is almost twice as efficient compared to internal combustion engines resulting in a lower fuel consumption of 1.05 kg-H2/100 km in the WLTP driving cycle for the fuel cell vehicle while the combustion vehicle consumed about 1.79 kg-H2/100 km. Regarding using different hydrogen colors to fuel the vehicle hydrogen-powered vehicles fueled with blue and grey hydrogen presented higher carbon emissions compared to petrol-powered vehicles reaching up to 2–3 times higher in the case of grey hydrogen. Thus green hydrogen is needed as fuel to keep carbon emissions lower than conventional petrol-powered vehicles.
A Review of Electrolyzer-based Systems Providing Grid Ancillary Service: Current Status, Market, Challenges and Future Directions
Feb 2024
Publication
Concerns related to climate change have shifted global attention towards advanced sustainable and decarbonized energy systems. While renewable resources such as wind and solar energy offer environmentally friendly alternatives their inherent variability and intermittency present significant challenges to grid stability and reliability. The integration of renewable energy sources requires innovative solutions to effectively balance supply and demand in the electricity grid. This review explores the critical role of electrolyzer systems in addressing these challenges by providing ancillary services to modern electricity grids. Electrolyzers traditionally used only for hydrogen production have now emerged as versatile tools capable of responding quickly to grid load variations. They can consume electricity during excess periods or when integrated with fuel cells generate electricity during peak demand contributing to grid stability. Therefore electrolyzer systems can fulfill the dual function of producing hydrogen for the end-user and offering grid balancing services ensuring greater economic feasibility. This review paper aims to provide a comprehensive view of the electrolyzer systems’ role in the provision of ancillary services including frequency control voltage control congestion management and black start. The technical aspects market projects challenges and future prospects of using electrolyzers to provide ancillary services in modern energy systems are explored.
Two-stage Optimization of Hydrogen and Storage Coordination for a Multi-region Flexible Intermodal Multi-energy Port System
Jan 2024
Publication
To address the issue of imbalanced electricity and hydrogen supply and demand in the flexible multi-energy port area system a multi-regional operational optimization and energy storage capacity allocation strategy considering the working status of flexible multi-status switches is proposed. Firstly based on the characteristics of the port area system models for system operating costs generation equipment energy storage devices flexible multi-status switches and others are established. Secondly the system is subjected to a first-stage optimization where different regions are optimized individually. The working periods of flexible multi-status switches are determined based on the results of this first-stage optimization targeting the minimization of the overall daily operating costs while ensuring 100% integration of renewable energy in periods with electricity supply-demand imbalances. Subsequently additional constraints are imposed based on the results of the first-stage optimization to optimize the entire system obtaining power allocation during system operation as well as power and capacity requirements for energy storage devices and flexible multi-status switches. Finally the proposed approach is validated through simulation examples demonstrating its advantages in terms of economic efficiency reduced power and capacity requirements for energy storage devices and carbon reduction.
Hydrogen Combustion: Features and Barriers to Its Exploitation in the Energy Transition
Oct 2023
Publication
The aim of this article is to review hydrogen combustion applications within the energy transition framework. Hydrogen blends are also included from the well-known hydrogen enriched natural gas (HENG) to the hydrogen and ammonia blends whose chemical kinetics is still not clearly defined. Hydrogen and hydrogen blends combustion characteristics will be firstly summarized in terms of standard properties like the laminar flame speed and the adiabatic flame temperature but also evidencing the critical role of hydrogen preferential diffusion in burning rate enhancement and the drastic reduction in radiative emission with respect to natural gas flames. Then combustion applications in both thermo-electric power generation (based on internal combustion engines i.e. gas turbines and piston engines) and hard-to-abate industry (requiring high-temperature kilns and furnaces) sectors will be considered highlighting the main issues due to hydrogen addition related to safety pollutant emissions and potentially negative effects on industrial products (e.g. glass cement and ceramic).
Experimental Investigation on Knock Characteristics from Pre-Chamber Gas Engine Fueled by Hydrogen
Feb 2024
Publication
Hydrogen-fueled engines require large values of the excess air ratio in order to achieve high thermal efficiency. A low value of this coefficient promotes knocking combustion. This paper analyzes the conditions for the occurrence of knocking combustion in an engine with a turbulent jet ignition (TJI) system with a passive pre-chamber. A single-cylinder engine equipped with a TJI system was running with an air-to-fuel equivalence ratio λ in the range of 1.25–2.00 and the center of combustion (CoC) was regulated in the range of 2–14 deg aTDC (top dead center). Such process conditions made it possible to fully analyze the ascension of knock combustion until its disappearance with the increase in lambda and CoC. Measures of knock in the form of maximum amplitude pressure oscillation (MAPO) and integral modulus of pressure oscillation (IMPO) were used. The absolute values of these indices were pointed out which can provide the basis for the definition of knock combustion. Based on our own work the MAPO index > 1 bar was defined determining the occurrence of knocking (without indicating its quality). In addition taking into account MAPO it was concluded that IMPO > 0.13 bar·deg is the quantity responsible for knocking combustion.
Decarbonization with Induced Technical Change: Exploring the Niche Potential of Hydrogen in Heavy Transportation
Jan 2024
Publication
Fuel cells and electric batteries are competing technologies for the energy transition in heavy transportation. We explore the conditions for the survival of a unique technology in the long term. Learning by doing suggests focusing on a single technology while differentiation and decreasing return to scale (cost convexity) favor diversification. Exogenous technical change also plays a role. The interaction between these factors is analyzed in a general model. It is proved that in absence of convexity and exogenous technical change only one technology is used for the whole transition. We then apply this framework to analyze the competition between fuel-cell electric buses (FCEBs) and battery electric buses (BEB) in the European bus sector. There are both learning by doing and exogenous technical change. The model is calibrated and solved. It is shown that the existence of a niche for FCEBs critically depends on the speed at which cost reductions are achieved. The speed depends both on the size of the niche and the rate of learning by doing for FCEBs. Public policies to decentralize the socially optimal trajectory in terms of taxes (carbon) and subsidies (learning by doing) are derived.
Hazard Footprint of Alternative Fuel Storage Concepts for Hydrogen-powered Urban Buses
Nov 2023
Publication
Hydrogen mobility is a powerful strategy to fight climate change promoting the decarbonization of the transportation sector. However the higher flammability of hydrogen in comparison with traditional fuels raises issues concerning the safety of hydrogen-powered vehicles in particular when urban mobility in crowded areas is concerned. In the present study a comparative analysis of alternative hydrogen storage concepts for buses is carried out. A specific inherent safety assessment methodology providing a hazard footprint of alternative hydrogen storage technologies was developed. The approach provides a set of ex-ante safety performance indicators and integrates a sensitivity analysis performed by a Monte Carlo method. Integral models for consequence analysis and a set of baseline frequencies are used to provide a preliminary identification of the worstcase credible fire and explosion scenarios and to rank the inherent safety of alternative concepts. Cryocompressed storage in the supercritical phase resulted as the more hazardous storage concept while cryogenic storage in the liquid phase at ambient pressure scored the highest safety performance. The results obtained support risk-informed decision-making in the shift towards the promotion of sustainable mobility in urban areas.
Process Path for Reducing Carbon Emissions from Steel Industry—Combined Electrification and Hydrogen Reduction
Jan 2024
Publication
This review focuses on the energy structure of iron and steel production and a feasible development path for carbon reduction. The process path and feasible development direction of carbon emission reduction in the iron and steel industry have been analyzed from the perspective of the carbon–electricity–hydrogen ternary relationship. Frontier technologies such as “hydrogen replacing carbon” are being developed worldwide. Combining the high efficiency of microwave electric-thermal conversion with the high efficiency and pollution-free advantages of hydrogen-reducing agents may drive future developments. In this review a process path for “microwave + hydrogen” synergistic metallurgy is proposed. The reduction of magnetite powder by H2 (CO) in a microwave field versus in a conventional field is compared. The driving effect of the microwave field is found to be significant and the synergistic reduction effect of microwaves with H2 is far greater than that of CO.
Low Platinum Fuel Cell as Enabler for the Hydrogen Fuel Cell Vehicle
Feb 2024
Publication
In this work the design and modeling of a fuel cell vehicle using low-loading platinum catalysts were investigated. Data from single fuel cells with low Pt-loading cathode catalysts were scaled up to fuel cell stacks and systems implemented in a vehicle and then compared to a commercial fuel cell vehicle. The low-loading Pt systems have shown lower efficiency at high loads compared to the commercial systems suggesting less stable materials. However the analysis showed that the vehicle comprising low-loading Pt catalysts achieves similar or higher efficiency compared to the commercial fuel cell vehicle when being scaled up for the same number of cells. When the systems were scaled up for the same maximum power as the commercial fuel cell vehicle all the low-loading Pt fuel cell systems showed higher efficiencies. In this case more cells are needed but still the amount of Pt is significantly reduced compared to the commercial one. The high-efficiency results can be associated with the vehicle’s power range operation that meets the region where the low-loading Pt fuel cells have high performance. The results suggested a positive direction towards the reduction of Pt in commercial fuel cell vehicles supporting a cost-competitive clean energy transition based on hydrogen.
Energy Management of Hydrogen Hybrid Electric Vehicles - A Potential Analysis
Jan 2024
Publication
The hydrogen combustion engine (H2 ICE) is known to be able to burn H2 producing no CO2 emissions and extremely low engine-out NOeo emissions. In this work the potential to reduce the NOeo emissions through the implementation of electric hybridization of an H2 ICE-equipped passenger car (H2 -HEV) combined with a dedicated energy management system (EMS) is discussed. Achieving a low H2 consumption and low NOeo emissions are conflicting objectives the trade-off of which depends on the EMS and can be represented as a Pareto front. The dynamic programming algorithm is used to calculate the Pareto-optimal EMS calibrations for various driving missions. Through the utilization of a dedicated energy management calibration H2 -HEVs exhibit the potential to decrease the NOeo x emissions by more than 90% while decreasing the H2 consumption by over 16% compared to a comparable non-hybridized H2 -vehicle. The present paper represents the initial potential analysis suggesting that H2 -HEVs are a viable option towards a CO2 -free mobility with extremely low NOeo emissions.
Regional Supply Chains for Decarbonising Steel: Energy Efficiency and Green Premium Mitigation
Jan 2022
Publication
Decarbonised steel enabled by green hydrogen-based iron ore reduction and renewable electricity-based steel making will disrupt the traditional supply chain. Focusing on the energetic and techno-economic assessment of potential green supply chains this study investigates the direct reduced iron-electric arc furnace production route enabled by renewable energy and deployed in regional settings. The hypothesis that co-locating manufacturing processes with renewable energy resources would offer highest energy efficiency and cost reduction is tested through an Australia-Japan case study. The binational partnership is structured to meet Japanese steel demand (for domestic use and regional exports) and source both energy and iron ore from the Pilbara region of Western Australia. A total of 12 unique supply chains differentiated by spatial configuration timeline and energy carrier were simulated which validated the hypothesis: direct energy and ore exports to remote steel producers (i.e. Japan-based production) as opposed to co-locating iron and steel production with abundant ore and renewable energy resources (i.e. Australia-based production) increased energy consumption and the levelised cost of steel by 45% and 32% respectively when averaged across 2030 and 2050. Two decades of technological development and economies of scale realisation would be crucial; 2030 supply chains were on average 12% more energy-intense and 23% more expensive than 2050 equivalents. On energy vectors liquefied hydrogen was more efficient than ammonia for export-dominant supply chains due to the pairing of its process flexibility and the intermittent solar energy profile as well as the avoidance of the need for ammonia cracking prior to direct reduction. To mitigate the green premium a carbon tax in the range of A$66–192/t CO2 would be required in 2030 and A$0–70/t CO2 in 2050; the diminished carbon tax requirement in the latter is achievable only by wholly Australia-based production. Further the modelled system scale was immense; producing 40 Mtpa of decarbonised steel will require 74–129% of Australia’s current electricity output and A$137–328 billion in capital investment for solar power production and shipping vessel infrastructure. These results call for strategic planning of regional resource pairing to drive energy and cost efficiencies which accelerate the global decarbonisation of steel.
Assessing Techno-economic Feasibility of Cogeneration and Power to Hydrogen Plants: A Novel Dynamic Simulation Model
Aug 2023
Publication
Green hydrogen technologies are crucial for decarbonization purposes while cogeneration offers efficient heat and power generation. Integrating green hydrogen and cogeneration brings numerous benefits optimizing energy utilization reducing emissions and supporting the transition to a sustainable future. While there are numerous studies examining the integration of combined heat and power with Power to Gas certain aspects still requires a more detailed analysis especially for internal combustion engines fuelled by natural gas due to their widespread adoption as one of the primary technologies in use. Therefore this paper presents a comprehensive numerical 0-D dynamic simulation model implemented within the TRNSYS environment considering internal combustion engines fuelled by natural gas. Specifically the study focuses on capturing CO2 from exhaust gases and producing green hydrogen from electrolysis. Based on these considerations two configurations are proposed: the first involves the methanation reaction while the second entails the production of a hydromethane mixture. The aim is to evaluate the technical and economic feasibility of these configurations and compare their performance within the Power to Gas framework. Self-sufficiency from the national electricity grid has been almost achieved for the two configurations considering an industrial case. The production of hydromethane allows smaller photovoltaic plant (81 kWp) compared to the production of synthetic methane (670 kWp) where a high quantity of hydrogen is required especially if all the carbon dioxide captured is used in the methanation process. Encouraging economic results with payback times below ten years have been obtained with the use of hydromethane. Moreover hydromethane shows potential residential applications with small required photovoltaic sizes.
Effects of Hydrogen, Methane, and Their Blends on Rapid-Filling Process of High-Pressure Composite Tank
Feb 2024
Publication
Alternative fuels such as hydrogen compressed natural gas and liquefied natural gas are considered as feasible energy carriers. Selected positive factors from the EU climate and energy policy on achieving climate neutrality by 2050 highlighted the need for the gradual expansion of the infrastructure for alternative fuel. In this research continuity equations and the first and second laws of thermodynamics were used to develop a theoretical model to explore the impact of hydrogen and natural gas on both the filling process and the ultimate in-cylinder conditions of a type IV composite cylinder (20 MPa for CNG 35 MPa and 70 MPa for hydrogen). A composite tank was considered an adiabatic system. Within this study based on the GERG-2008 equation of state a thermodynamic model was developed to compare and determine the influence of (i) hydrogen and (ii) natural gas on the selected thermodynamic parameters during the fast-filling process. The obtained results show that the cylinder-filling time depending on the cylinder capacity is approximately 36–37% shorter for pure hydrogen compared to pure methane and the maximum energy stored in the storage tank for pure hydrogen is approximately 28% lower compared to methane whereas the total entropy generation for pure hydrogen is approximately 52% higher compared to pure methane.
Alternative Power Options for Improvement of the Environmental Friendliness of Fishing Trawlers
Dec 2022
Publication
The fishing sector is faced with emission problems arising from the extensive use of diesel engines as prime movers. Energy efficiency environmental performance and minimization of operative costs through the reduction of fuel consumption are key research topics across the whole maritime sector. Ship emissions can be determined at different levels of complexity and accuracy i.e. by analyzing ship technical data and assuming its operative profile or by direct measurements of key parameters. This paper deals with the analysis of the environmental footprint of a fishing trawler operating in the Adriatic Sea including three phases of the Life-Cycle Assessment (manufacturing Well-to-Pump (WTP) and Pump-to-Wake (PTW)). Based on the data on fuel consumption the viability of replacing the conventional diesel-powered system with alternative options is analyzed. The results showed that fuels such as LNG and B20 represent the easiest solution that would result in a reduction of harmful gases and have a positive impact on overall costs. Although electrification and hydrogen represent one of the cleanest forms of energy due to their high price and complex application in an obsolete fleet they do not present an optimal solution for the time being. The paper showed that the use of alternative fuels would have a positive effect on the reduction of harmful emissions but further work is needed to find an environmentally acceptable and economically profitable pathway for redesigning the ship power system of fishing trawlers.
Literature Review on Life Cycle Assessment of Transportation Alternative Fuels
Aug 2023
Publication
Environmental concerns such as global warming and human health damage are intensifying and the transportation sector significantly contributes to carbon and harmful emissions. This review examines the life cycle assessment (LCA) of alternative fuels (AF) evaluating current research on fuel types LCA framework development life cycle inventory (LCI) and impact selection. The objectives of this paper are: (1) to compare various AF LCA frameworks and develop a comprehensive framework for the transportation sector; (2) to identify emission hotspots of different AFs through simulations and real-world cases; (3) to review AF LCA research; (4) to extract valuable information for potential future research directions. The analysis reveals that all stages except for hydrogen use have an environmental impact. LCA boundaries and LCIs vary considerably depending on the raw materials production processes and products involved leading to different emission hotspots. Due to knowledge or data limitations some stages remain uncalculated in the current study emphasizing the need for further refinement of the AF LCI. Future research should also explore the various impacts of widespread adoption of alternative fuels in transportation encompassing social economic and environmental aspects. Lastly the review provides structured recommendations for future research directions.
Comparison of Battery Electric Vehicles and Fuel Cell Vehicles
Sep 2023
Publication
In the current context of the ban on fossil fuel vehicles (diesel and petrol) adopted by several European cities the question arises of the development of the infrastructure for the distribution of alternative energies namely hydrogen (for fuel cell electric vehicles) and electricity (for battery electric vehicles). First we compare the main advantages/constraints of the two alternative propulsion modes for the user. The main advantages of hydrogen vehicles are autonomy and fast recharging. The main advantages of battery-powered vehicles are the lower price and the wide availability of the electricity grid. We then review the existing studies on the deployment of new hydrogen distribution networks and compare the deployment costs of hydrogen and electricity distribution networks. Finally we conclude with some personal conclusions on the benefits of developing both modes and ideas for future studies on the subject.
Profitability of Hydrogen-Based Microgrids: A Novel Economic Analysis in Terms of Electricity Price and Equipment Costs
Oct 2023
Publication
The current need to reduce carbon emissions makes hydrogen use essential for selfconsumption in microgrids. To make a profitability analysis of a microgrid the influence of equipment costs and the electricity price must be known. This paper studies the cost-effective electricity price (EUR/kWh) for a microgrid located at ‘’La Rábida Campus” (University of Huelva south of Spain) for two different energy-management systems (EMSs): hydrogen-priority strategy and batterypriority strategy. The profitability analysis is based on one hand on the hydrogen-systems’ cost reduction (%) and on the other hand considering renewable energy sources (RESs) and energy storage systems (ESSs) on cost reduction (%). Due to technological advances microgrid-element costs are expected to decrease over time; therefore future profitable electricity prices will be even lower. Results show a cost-effective electricity price ranging from 0.61 EUR/kWh to 0.16 EUR/kWh for hydrogen-priority EMSs and from 0.4 EUR/kWh to 0.17 EUR/kWh for battery-priority EMSs (0 and 100% hydrogen-system cost reduction respectively). These figures still decrease sharply if RES and ESS cost reductions are considered. In the current scenario of uncertainty in electricity prices the microgrid studied may become economically competitive in the near future
Model-based Economic Analysis of Off-grid Wind/Hydrogen Systems
Sep 2023
Publication
Hydrogen has emerged in the context of large-scale renewable uptake and deep decarbonization. However the high cost of splitting water into hydrogen using renewable energy hinders the development of green hydrogen. Here we provide a cost analysis of hydrogen from off-grid wind. It is found that the current cost evaluation can be improved by examining the operational details of electrolysis. Instead of using low-resolution wind-speed data and linear electrolysis models we generate 5-min resolution wind data and utilize detailed electrolysis models that can describe the safe working range startup time and efficiency variation. Economic assessments are performed over 112 locations in seven countries to demonstrate the influence of operational models. It is shown that over-simplified models lead to less reliable results and the relative error can be 63.65% at most. Further studies have shown the global picture of producing green hydrogen. Based on the improved model we find that the levelized cost of hydrogen ranges from 1.66$/kg to 13.61$/kg. The wind-based hydrogen is cost-competitive in areas with abundant resources and lower investment cost such as China and Denmark. However it is still costly in most of the studied cases. An optimal sizing strategy or involving a battery as electricity storage can further reduce the hydrogen cost the effectiveness of which is location-specific. The sizing strategies of electrolyzers differ by country and rely on the specific wind resource. In contrast the sizing of batteries presents similar trends. Smaller batteries are preferred in almost all the investigated cases.
Power Balance Control and Dimensioning of a Hybrid Off-grid Energy system for a Nordic Climate Townhouse
Mar 2023
Publication
This paper investigates conversion of a Nordic oil-heated townhouse into carbon-neutral by different energy efficiency (EE) improvements and an off-grid system including solar photovoltaics (PV) wind power and battery and hydrogen energy storage systems (BESS and HESS). A heat-pump-based heating system including waste heat recovery (WHR) from the HESS and an off-grid electrical system are dimensioned for the building by applying models developed in MATLAB and Microsoft Excel to study the life cycle costs (LCC). The work uses a measured electrical load profile and the heat generation of the new heating system and the power generation are simulated by commercial software. It is shown that the EE improvements and WHR from the HESS have a positive effect on the dimensioning of the off-grid system and the LCC can be reduced by up to €2 million. With the EE improvements and WHR the component dimensioning can be reduced by 22%–41% and 13%–51% on average respectively. WHR can cover up to 57% of the building's annual heat demand and full-power dimensioning of the heat pump is not reasonable when WHR is applied. Wind power was found to be very relevant in the Nordic conditions reducing the LCC by 32%.
Data-driven Scheme for Optimal Day-ahead Operation of a Wind/hydrogen System Under Multiple Uncertainties
Nov 2022
Publication
Hydrogen is believed as a promising energy carrier that contributes to deep decarbonization especially for the sectors hard to be directly electrified. A grid-connected wind/hydrogen system is a typical configuration for hydrogen production. For such a system a critical barrier lies in the poor cost-competitiveness of the produced hydrogen. Researchers have found that flexible operation of a wind/hydrogen system is possible thanks to the excellent dynamic properties of electrolysis. This finding implies the system owner can strategically participate in day-ahead power markets to reduce the hydrogen production cost. However the uncertainties from imperfect prediction of the fluctuating market price and wind power reduce the effectiveness of the offering strategy in the market. In this paper we proposed a decision-making framework which is based on data-driven robust chance constrained programming (DRCCP). This framework also includes multi-layer perception neural network (MLPNN) for wind power and spot electricity price prediction. Such a DRCCP-based decision framework (DDF) is then applied to make the day-ahead decision for a wind/hydrogen system. It can effectively handle the uncertainties manage the risks and reduce the operation cost. The results show that for the daily operation in the selected 30 days offering strategy based on the framework reduces the overall operation cost by 24.36% compared to the strategy based on imperfect prediction. Besides we elaborate the parameter selections of the DRCCP to reveal the best parameter combination to obtain better optimization performance. The efficacy of the DRCCP method is also highlighted by the comparison with the chance-constrained programming method.
Green Energy Hubs for the Military That Can Also Support he Civilian Mobility Sector with Green Hydrogen
May 2023
Publication
To support the energy transition in the area of defence we developed a tool and conducted a feasibility study to transform a military site from being a conventional energy consumer to becoming an energy-positive hub (or prosumer). Coupling a green energy source (e.g. photovoltaic wind) with fuel cells and hydrogen storage satisfied the dynamic energy consumption and dynamic hydrogen demand for both the civilian and military mobility sectors. To make the military sector independent of its civilian counterpart a military site was connected to a renewable energy hub. This made it possible to develop a stand-alone green-energy system transform the military site into a positive energy hub and achieve autonomous energy operation for several days or weeks. An environmental and economic assessment was conducted to determine the carbon footprint and the economic viability. The combined installed capacity of the solar power plant and the wind turbine was 2.5 times the combined peak consumption with about 19% of the total electricity and 7% of the hydrogen produced still available to external consumers.
Review of Sampling and Analysis of Particulate Matter in Hydrogen Fuel
Sep 2023
Publication
This review presents state-of-the-art for representative sampling of hydrogen from hydrogen refueling stations. Documented sampling strategies are presented as well as examples of commercially available equipment for sampling at the hydrogen refueling nozzle. Filter media used for sampling is listed and the performance of some of the filters evaluated. It was found that the filtration efficiency of 0.2 and 5 mm filters were not significantly different when exposed to 200 and 300 nm particles. Several procedures for gravimetric analysis are presented and some of the challenges are identified to be filter degradation pinhole formation and conditioning of the filter prior to measurement. Lack of standardization of procedures was identified as a limitation for result comparison. Finally the review summarizes results including particulate concentration in hydrogen fuel quality data published. It was found that less than 10% of the samples were in violation with the tolerance limit.
Efficient Combustion of Low Calorific Industrial Gases: Opportunities and Challenges
Dec 2022
Publication
It is becoming increasingly important to develop effective combustion technologies for low calorific industrial gases (LCIG) because of the rising energy demand and environmental issues caused by the extensive use of fossil fuels. In this review the prospect of these opportunity fuels in China is discussed. Then the recent fundamental and engineering studies of LCIG combustion are summarized. Specifically the differences between LCIG and traditional fuels in the composition and fundamental combustion characteristics are described. The state-of-the-art combustion strategies for burning LCIG are reviewed including porous media combustion flameless combustion oxy-fuel combustion and dual-fuel combustion. The technical challenges and further development needs for efficient LCIG combustion are also discussed.
Operational Optimization of Regional Integrated Energy Systems with Heat Pumps and Hydrogen Renewable Energy under Integrated Demand Response
Jan 2024
Publication
A regional integrated energy system (RIES) synergizing multiple energy forms is pivotal for enhancing renewable energy use and mitigating the greenhouse effect. Considering that the equipment of the current regional comprehensive energy system is relatively simple there is a coupling relationship linking power generation refrigeration and heating in the cogeneration system which is complex and cannot directly meet various load demands. This article proposes a RIES optimization model for bottom-source heat pumps and hydrogen storage systems in the context of comprehensive demand response. First P2G electric hydrogen production technology was introduced into RIES to give full play to the high efficiency advantages of hydrogen energy storage system and the adjustable thermoelectric ratio of the HFC was considered. The HFC could adjust its own thermoelectric ratio according to the system load and unit output. Second through the groundsource heat pump’s cleaning efficiency function further separation and cooling could be achieved. The heat and electrical output of RIES improved the operating efficiency of the system. Thirdly a comprehensive demand response model for heating cooling and electricity was established to enable users to reasonably adjust their own energy use strategies to promote the rational distribution of energy in the system. The model integrates power-to-gas (P2G) technology leveraging the tunable thermoelectric ratio of a hydrogen fuel cell (HFC) to optimize the generation of electricity and heat while maximizing the efficiency of the hydrogen storage system. Empirical analysis substantiated the proposed RIES model’s effectiveness and economic benefits when integrating ground-source HP and electric hydrogen production with IDR. Compared with the original model the daily operating cost of the proposed model was reduced by RMB 1884.16.
Experimental Activities on a Hydrogen-Fueled Spark-Ignition Engine for Light-Duty Applications
Nov 2023
Publication
The increase in the overall global temperature and its subsequent impact on extreme weather events are the most critical consequences of human activity. In this scenario transportation plays a significant role in greenhouse gas (GHG) emissions which are the main drivers of climate change. The decline of non-renewable energy sources coupled with the aim of reducing GHG emissions from fossil fuels has forced a shift towards a net-zero emissions economy. As an example of this transition the European Union has set 2050 as the target for achieving carbon neutrality. Hydrogen (H2 ) is gaining increasing relevance as one of the most promising carbon-free energy vectors. If produced from renewable sources it facilitates the integration of various alternative energy sources for achieving a carbon-neutral economy. Recently interest in its application to the transportation sector has grown including different power plant concepts such as fuel cells or internal combustion engines. Despite exhibiting significant drawbacks such as low density combustion instabilities and incompatibilities with certain materials hydrogen is destined to become one of the future fuels. In this publication experimental activities are reported that were conducted on a sparkignition engine fueled with hydrogen at different operating points. The primary objective of this research is to gain a better understanding of the thermodynamic processes that control combustion and their effects on engine performance and pollutant emissions. The results show the emission levels performance and combustion characteristics under different conditions of dilution load and injection strategy and timing.
No more items...