Applications & Pathways
Prospective Assessment of Transformation Pathways Toward Low-carbon Steelmaking: Evaluating Economic and Climate Impacts in Germany
Jan 2024
Publication
Due to climate change there is an urgent need to decarbonize high-emission industries. As coal-based operations predominate in primary steelmaking the steel industry offers an exceptionally high potential for reducing greenhouse gas emissions. Alternative processes for almost fully decarbonized primary steelmaking exist but require substantial investments by steelmakers for their implementation while maintaining desired production levels during the transformation periods. In this context the energy carriers required change such that the transformation of the steelmaking processes is deeply intertwined with the transformation of the background system. For the first time we evaluate potential transformation pathways from the steelmakers’ perspective using a prospective life cycle assessment approach. We find that hydrogen may facilitate a reduction of direct emissions by around 96 % compared to conventional steelmaking in 2050. However indirect emissions remain at a high level throughout the transformation period unless the upstream stages of the value chain are transformed accordingly.
H2-powered Aviation - Design and Economics of Green LH2 Supply for Airports
Aug 2023
Publication
The economic competitiveness of hydrogen-powered aviation highly depends on the supply costs of green liquid hydrogen to enable true-zero CO2 flying. This study uses non-linear energy system optimization to analyze three main liquid hydrogen (LH2) supply pathways for five locations. Final liquid hydrogen costs at the dispenser supply costs could reach 2.04 USD/kgLH2 in a 2050 base case scenario for locations with strong renewable energy source conditions. This could lead to cost-competitive flying with hydrogen. Reflecting techno-economic uncertainties in two additional scenarios the liquid hydrogen cost span at all five airport locations ranges between 1.37–3.48 USD/kgLH2 if hydrogen import options from larger hydrogen markets are also available. Import setups are of special importance for airports with a weaker renewable energy source situation e.g. selected Central European airports. There on-site supply might not only be too expensive but space requirements for renewable energy sources could be too large for feasible implementation in densely populated regions. Furthermore main costs for liquid hydrogen are caused by renewable energy sources electrolysis systems and liquefaction plants. Seven detailed design rules are derived for optimized energy systems for these and the storage components. This and the cost results should help infrastructure planners and general industry and policy players prioritize research and development needs
Conversion of a Small-Size Passenger Car to Hydrogen Fueling: 0D/1D Simulation of EGR and Related Flow Limitations
Jan 2024
Publication
Hydrogen is seen as a prime choice for complete replacement of gasoline so as to achieve zero-emissions energy and mobility. Combining the use of this alternative fuel with a circular economy approach for giving new life to the existing fleet of passenger cars ensures further benefits in terms of cost competitiveness. Transforming spark ignition (SI) engines to H2 power requires relatively minor changes and limited added components. Within this framework the conversion of a small-size passenger car to hydrogen fueling was evaluated based on 0D/1D simulation. One of the methods to improve efficiency is to apply exhaust gas recirculation (EGR) which also lowers NOx emissions. Therefore the previous version of the quasi-dimensional model was modified to include EGR and its effects on combustion. A dedicated laminar flame speed model was implemented for the specific properties of hydrogen and a purpose-built sub-routine was implemented to correctly model the effects of residual gas at the start of combustion. Simulations were performed in several operating points representative of urban and highway driving. One of the main conclusions was that highpressure recirculation was severely limited by the minimum flow requirements of the compressor. Low-pressure EGR ensured wider applicability and significant improvement of efficiency especially during partial-load operation specific to urban use. Another benefit of recirculation was that pressure rise rates were predicted to be more contained and closer to the values expected for gasoline fueling. This was possible due to the high tolerance of H2 to the presence of residual gas.
Techno-economic Analysis of Direct Air Carbon Capture and Hydrogen Production Integrated with a Small Modular Reactor
Dec 2023
Publication
This study aims to explore the techno-economic potential of harnessing waste heat from a Small Modular Reactor (SMR) to fuel Direct Air Carbon Capture (DACC) and High Temperature Steam Electrolysis (HTSE) technologies. The proposed system’s material flows and energy demands are modelled via the ASPEN Plus v12.1 where results are utilised to provide estimates of the Levelised Cost of DACC (LCOD) and Levelised Cost of Hydrogen (LCOH). The majority of thermal energy and electrical utilities are assumed to be supplied directly by the SMR. A sensitivity analysis is then performed to investigate the effects of core operational parameters of the system. Key results indicate levelised costs of 4.66 $/kgH2 at energy demands of 34.37 kWh/kgH2 and 0.02 kWh/kgH2 thermal for HTSE hydrogen production and 124.15 $/tCO2 at energy demands of 31.67 kWh/tCO2 and 126.33 kWh/tCO2 thermal for carbon capture; parameters with most impact on levelised costs are air intake and steam feed for LCOD and LCOH respectively. Both levelised costs i.e. LCOD and LCOH would decrease with the production scale. The study implies that an integrated system of DACC and HTSE provided the best cost-benefit results however the cost-benefit analysis is heavily subjective to geography politics and grid demand.
Feasibility of Green Hydrogen-Based Synthetic Fuel as a Carbon Utilization Option: An Economic Analysis
Sep 2023
Publication
Singapore has committed to achieving net zero emissions by 2050 which requires the pursuit of multiple decarbonization pathways. CO2 utilization methods such as fuel production may provide a fast interim solution for carbon abatement. This paper evaluates the feasibility of green hydrogen-based synthetic fuel (synfuel) production as a method for utilizing captured CO2. We consider several scenarios: a baseline scenario with no changes local production of synfuel with hydrogen imports and overseas production of synfuel with CO2 exports. This paper aims to determine a CO2 price for synfuel production evaluate the economic viability of local versus overseas production and investigate the effect of different cost parameters on economic viability. Using the current literature we estimate the associated production and transport costs under each scenario. We introduce a CO2 utilization price (CUP) that estimates the price of utilizing captured CO2 to produce synfuel and an adjusted CO2 utilization price (CCUP) that takes into account the avoided emissions from crude oil-based fuel production. We find that overseas production is more economically viable compared to local production with the best case CCUP bounds giving a range of 142–148 $/tCO2 in 2050 if CO2 transport and fuel shipping costs are low. This is primarily due to the high cost of hydrogen feedstock especially the transport cost which can offset the combined costs of CO2 transport and fuel shipping. In general we find that any increase in the hydrogen feedstock cost can significantly affect the CCUP for local production. Sensitivity analysis reveals that hydrogen transport cost has a significant impact on the viability of local production and if this cost is reduced significantly local production can be cheaper than overseas production. The same is true if the economies of scale for local production is significantly better than overseas production. A significantly lower carbon capture cost can also the reduce the CCUP significantly.
A Renewable Power System for an Off-grid Sustainable Telescope Fueled by Solar Power, Batteries and Green Hydrogen
Jul 2023
Publication
A large portion of astronomy’s carbon footprint stems from fossil fuels supplying the power demand of astronomical observatories. Here we explore various isolated low-carbon power system setups for the newly planned Atacama Large Aperture Submillimeter Telescope and compare them to a business-as-usual diesel power generated system. Technologies included in the designed systems are photovoltaics concentrated solar power diesel generators batteries and hydrogen storage. We adapt the electricity system optimization model highRES to this case study and feed it with the telescope’s projected energy demand cost assumptions for the year 2030 and site-specific capacity factors. Our results show that the lowest-cost system with LCOEs of $116/MWh majorly uses photovoltaics paired with batteries and fuel cells running on imported and on-site produced green hydrogen. Some diesel generators run for backup. This solution would reduce the telescope’s power-side carbon footprint by 95% compared to the businessas-usual case.
Energy and Greenhouse Gases Life Cycle Assessment of Electric and Hydrogen Buses: A Real-world Case Study in Bolzano Italy
May 2023
Publication
The transportation sector plays an important role in the current effort towards the control of global warming. Against this backdrop electrification is currently attracting attention as the life cycle environmental performance of different powertrain technologies is critically assessed. In this study a life cycle analysis of the public transportation buses was performed. The scope of the analysis is to compare the energy and global warming performances of the different powertrain technologies in the city fleet: diesel full electric and hydrogen buses. Real world monitored data were used in the analysis for the energy consumptions of the buses and to produce hydrogen in Bolzano. Compared to the traditional diesel buses the electric vehicles showed a 43% reduction of the non-renewable primary energy demand and a 33% of the global warming potential even in the worst consequential scenario considered. The switch to hydrogen buses leads to very different environmental figures: from very positive if it contributes to a further penetration of renewable electricity to hardly any difference if hydrogen from steam-methane reforming is used to clearly negative ones (approximately doubling the impacts) if a predominantly fossil electricity mix is used in the electrolysis.
Real-Time Energy Management Strategy of Hydrogen Fuel Cell Hybrid Electric Vehicles Based on Power Following Strategy–Fuzzy Logic Control Strategy Hybrid Control
Nov 2023
Publication
Fuel cell hybrid electric vehicles have the advantages of zero emission high efficiency and fast refuelling etc. and are one of the key directions for vehicle development. The energy management problem of fuel cell hybrid electric vehicles is the key technology for power distribution. The traditional power following strategy has the advantage of a real-time operation but the power correction is usually based only on the state of charge of a lithium battery which causes the operating point of the fuel cell to be in the region of a low efficiency. To solve this problem this paper proposes a hybrid power-following-fuzzy control strategy where a fuzzy logic control strategy is used to optimise the correction module based on the power following strategy which regulates the state of charge while correcting the output power of the fuel cell towards the efficient operating point. The results of the joint simulation with Matlab + Advisor under the Globally Harmonised Light Vehicle Test Cycle Conditions show that the proposed strategy still ensures the advantages of real-time energy management and for the hydrogen fuel cell the hydrogen consumption is reduced by 13.5% and 4.1% compared with the power following strategy and the fuzzy logic control strategy and the average output power variability is reduced by 14.6% and 5.1% respectively which is important for improving the economy of the whole vehicle and prolonging the lifetime of fuel cell.
The Role of Biomass Gasification in Low-carbon Energy and Transport Systems
Mar 2021
Publication
The design of future energy systems requires the efficient use of all available renewable resources. Biomass can complement variable renewable energy sources by ensuring energy system flexibility and providing a reliable feedstock to produce renewable fuels. We identify biomass gasification suitable to utilise the limited biomass resources efficiently. In this study we inquire about its role in a 100% renewable energy system for Denmark and a net-zero energy system for Europe in the year 2050 using hourly energy system analysis. The results indicate bio-electrofuels produced from biomass gasification and electricity to enhance the utilisation of wind and electrolysis and reduce the energy system costs and fuels costs compared to CO2-electrofuels from carbon capture and utilisation. Despite the extensive biomass use overall biomass consumption would be higher without biomass gasification. The production of electromethanol shows low biomass consumption and costs while Fischer-Tropsch electrofuels may be an alternative for aviation. Syngas from biomass gasification can supplement biogas in stationary applications as power plants district heat or industry but future energy systems must meet a balance between producing transport fuels and syngas for stationary units. CO2-electrofuels are found complementary to bio-electrofuels depending on biomass availability and remaining non-fossil CO2 emitters
A Review on the Research Progress and Application of Compressed Hydrogen in the Marine Hydrogen Fuel Cell Power System
Jan 2024
Publication
The urgency to mitigate greenhouse gas emissions from maritime vessels has intensified due to the increasingly stringent directives set forth by the International Maritime Organization (IMO). These directives specifically address energy efficiency enhancements and emissions reduction within the shipping industry. In this context hydrogen is the much sought after fuel for all the global economies and its applications for transportation and propulsion in particular is crucial for cutting down carbon emissions. Nevertheless the realization of hydrogen-powered vessels is confronted by substantial technical hurdles that necessitate thorough examination. This study undertakes a comprehensive analysis encompassing diverse facets including distinct variations of hydrogen fuel cells hydrogen internal combustion engines safety protocols associated with energy storage as well as the array of policies and commercialization endeavors undertaken globally for the advancement of hydrogen-propelled ships. By amalgamating insights from these multifaceted dimensions this paper adeptly encapsulates the myriad challenges intrinsic to the evolution of hydrogen-fueled maritime vessels while concurrently casting a forward-looking gaze on their prospective trajectory.
Evaluation of the Potential for Distributed Generation of Green Hydrogen Using Metal-hydride Storage Methods
May 2023
Publication
This study presents methodology for the evaluation of appropriateness of a hydrogen generator for gas production in multiple distributed plants based on renewable energy sources. The general idea is to form hydrogen clusters integrated with storage and transportation. The paper focuses on the financial viability of the plants presenting the results of economic evaluation together with sensitivity analysis for various economic factors. The analyzed case study proves that over a wide range of parameters alkaline electrolyzers show favorable economic characteristics however a PEM-based plant is more resilient to changes in the price of electricity which is the main cost component in hydrogen generation. The study is enriched with an experimental investigation of low-pressure storage methods based on porous metal hydride tanks. The effectiveness of the tanks (β) compared to pressurized hydrogen tanks in the same volume and pressure is equal to β = 10.2. A solution is proposed whereby these can be used in a distributed hydrogen generation concept due to their safe and simple operation without additional costly equipment e.g. compressors. A method for evaluation of the avoided energy consumption as a function of the effectiveness of the tanks is developed. Avoided energy consumption resulting from implementing MH tanks equals 1.33 – 1.37 kWh per kilogram of hydrogen depending on the number of stages of a compressor. The methods proposed in this paper are universal and can be used for various green hydrogen facilities.
Deep Reinforcement Learning-Based Energy Management for Liquid Hydrogen-Fueled Hybrid Electric Ship Propulsion System
Oct 2023
Publication
This study proposed a deep reinforcement learning-based energy management strategy (DRL-EMS) that can be applied to a hybrid electric ship propulsion system (HSPS) integrating liquid hydrogen (LH2 ) fuel gas supply system (FGSS) proton-exchange membrane fuel cell (PEMFC) and lithium-ion battery systems. This study analyzed the optimized performance of the DRL-EMS and the operational strategy of the LH2 -HSPS. To train the proposed DRL-EMS a reward function was defined based on fuel consumption and degradation of power sources during operation. Fuel consumption for ship propulsion was estimated with the power for balance of plant (BOP) of the LH2 FGSS and PEMFC system. DRL-EMS demonstrated superior global and real-time optimality compared to benchmark algorithms namely dynamic programming (DP) and sequential quadratic programming (SQP)-based EMS. For various operation cases not used in training DRL-EMS resulted in 0.7% to 9.2% higher operating expenditure compared to DP-EMS. Additionally DRL-EMS was trained to operate 60% of the total operation time in the maximum efficiency range of the PEMFC system. Different hydrogen fuel costs did not affect the optimized operational strategy although the operating expenditure (OPEX) was dependent on the hydrogen fuel cost. Different capacities of the battery system did not considerably change the OPEX.
Hydrogen Consumption and Durability Assessment of Fuel Cell Vehicles in Realistic Driving
Jan 2024
Publication
This study proposes a predictive equivalent consumption minimization strategy (P-ECMS) that utilizes velocity prediction and considers various dynamic constraints to mitigate fuel cell degradation assessed using a dedicated sub-model. The objective is to reduce fuel consumption in real-world conditions without prior knowledge of the driving mission. The P-ECMS incorporates a velocity prediction layer into the Energy Management System. Comparative evaluations with a conventional adaptive-ECMS (A-ECMS) a standard ECMS with a well-tuned constant equivalence factor and a rule-based strategy (RBS) are conducted across two driving cycles and three fuel cell dynamic restrictions (|∕| ≤ 0.1 0.01 and 0.001 A∕cm2 ). The proposed strategy achieves H2 consumption reductions ranging from 1.4% to 3.0% compared to A-ECMS and fuel consumption reductions of up to 6.1% when compared to RBS. Increasing dynamic limitations lead to increased H2 consumption and durability by up to 200% for all tested strategies.
A Novel Layout for Combined Heat and Power Production for a Hospital Based on a Solid Oxide Fuel Cell
Feb 2024
Publication
This paper addresses the problem of the reduction in the huge energy demand of hospitals and health care facilities. The sharp increase in the natural gas price due to the Ukrainian–Russian war has significantly reduced economic savings achieved by combined heat and power (CHP) units especially for hospitals. In this framework this research proposes a novel system based on the integration of a reversible CHP solid oxide fuel cell (SOFC) and a photovoltaic field (PV). The PV power is mainly used for balancing the hospital load. The excess power production is exploited to produce renewable hydrogen. The SOFC operates in electrical tracking mode. The cogenerative heat produced by the SOFC is exploited to partially meet the thermal load of the hospital. The SOFC is driven by the renewable hydrogen produced by the plant. When this hydrogen is not available the SOFC is driven by natural gas. In fact the SOFC is coupled with an external reformer. The simulation model of the whole plant including the reversible SOFC PV and hospital is developed in the TRNSYS18 environment and MATLAB. The model of the hospital is calibrated by means of measured data. The proposed system achieves very interesting results with a primary energy-saving index of 33% and a payback period of 6.7 years. Therefore this energy measure results in a promising solution for reducing the environmental impact of hospital and health care facilities.
Maximisation of PV Energy Use and Performance Analysis of a Stand-alone PV-hydrogen System
Sep 2023
Publication
The development of clean hydrogen and photovoltaic (PV) systems is lagging behind the goals set in the Net Zero Emissions scenario of the International Energy Agency. For this reason efficient hydrogen production systems powered from renewable energy need to be deployed faster. This work presents an optimization procedure for a stand-alone fully PVpowered alkaline electrolysis system. The approach is based on the Particle Swarm Optimization algorithm to obtain the best configuration of the PV plant that powers the electrolyzer and its compressor. The best configuration is determined with one of three indicators: cost efficiency or wasted energy. The PV plant needs to be oversized 2.63 times with respect to the electrolyzer to obtain minimum cost while for high efficiency this number increases by 2%. Additionally the configuration that minimizes cost wasted energy or maximizes efficiency does not correspond to the configuration that maximizes the annual PV yield. Optimizing for cost results also leads to the best operation of the electrolyzer at partial loads than optimizing for efficiency or wasted energy.
Future of Hydrogen in Industry: Initial Industrial Site Surveys
Jul 2023
Publication
This is a summary report of a study which aimed to understand the safety feasibility cost and impacts for 7 industrial sites to switch from natural gas to 100% hydrogen for heating. The volunteer industrial sites:<br/>♦ are located away from industrial clusters<br/>♦ use natural gas to meet most of their energy demand<br/>♦ will likely be most impacted by decisions on the future of the natural gas grid<br/>We have published the report in order to share its findings with other industrial sites and wider industry in particular those considering hydrogen as an option for decarbonisation.<br/>Note that:<br/>♦ some work was carried out on a non-hydrogen alternative energy source but to a lesser level of detail and not to determine the optimal decarbonisation solution<br/>♦ the findings do not apply to other end user environments because of differences between these environments and the consumption of gas<br/>The study was commissioned in 2022 by the former Department for Business and Energy and undertaken by AECOM and their safety sub-contractor ESR.<br/>The evidence will inform strategic decisions in 2026 on the role of low carbon hydrogen as a replacement for natural gas heating.
Research on the Adaptability of Proton Exchange Membrane Electrolysis in Green Hydrogen-Electric Coupling System Under Multi-operating Conditions
Mar 2023
Publication
The green hydrogen–electric coupling system can consume locally generated renewable energy thereby improving energy utilization and enabling zero-carbon power supply within a certain range. This study focuses on a green hydrogen–electric coupling system that integrates photovoltaic energy storage and proton exchange membrane electrolysis (PEME). Firstly the impact of operating temperature power quality and grid auxiliary services on the characteristics of the electrolysis cell is analyzed and a voltage model and energy model for the cell are established. Secondly a multi-operating conditions adaptability experiment for PEME grid-connected operation is designed. A test platform consisting of a grid simulator simulated photovoltaic power generation system lithium battery energy storage system PEME and measurement and acquisition device is then built. Finally experiments are conducted to simulate multi-operating conditions such as temperature changes voltage fluctuations frequency offsets harmonic pollution and current adjustment speed. The energy efficiency and consumption is calculated based on the recorded data and the results are helpful to guide the operation of the system.
Renewable Marine Fuel Production for Decarbonised Maritime Shipping: Pathways, Policy Measures and Transition Dynamics
Jun 2023
Publication
This article investigates the potential of renewable and low-carbon fuel production for the maritime shipping sector using Sweden as a case in focus. Techno-economic modelling and socio-technical transition studies are combined to explore the conditions opportunities and barriers to decarbonising the maritime shipping industry. A set of scenarios have been developed considering demand assumptions and potential instruments such as carbon price energy tax and blending mandate. The study finds that there are opportunities for decarbonising the maritime shipping industry by using renewable marine fuels such as advanced biofuels (e.g. biomethanol) electrofuels (e.g. e-methanol) and hydrogen. Sweden has tremendous resource potential for bio-based and hydrogen-based renewable liquid fuel production. In the evaluated system boundary biomethanol presents the cheapest technology option while e-ammonia is the most expensive one. Green electricity plays an important role in the decarbonisation of the maritime sector. The results of the supply chain optimisation identify the location sites and technology in Sweden as well as the trade flows to bring the fuels to where the bunker facilities are potentially located. Biomethanol and hydrogen-based marine fuels are cost-effective at a carbon price beyond 100 €/tCO2 and 200 €/tCO2 respectively. Linking back to the socio-technical transition pathways the study finds that some shipping companies are in the process of transitioning towards using renewable marine fuels thereby enabling niche innovations to break through the carbon lock-in and eventually alter the socio-technical regime while other shipping companies are more resistant. Overall there is increasing pressure from (inter)national energy and climate policy-making to decarbonise the maritime shipping industry.
Evaluation of Process Simulation and Reactor Technologies of an Integrated Power-to-liquid Plant at a Cement Factory
Mar 2023
Publication
A novel carbon capture and utilization (CCU) process is described in which process-related carbon dioxide is captured from cement plant exhaust gas (10000 tons/year) and converted with green hydrogen in a Fischer Tropsch synthesis to liquid mainly paraffinic hydrocarbons (syncrude approx. 3000 tons/year) which is finally processed to polyolefins. This CCU process chain is simulated with the software package ASPEN Plus V12.1®. In a first step the influence of hydrogen production technology such as PEM and SOEC and reverse water-gas shift reactor (rWGS) technology (electrified and autothermal design) on plant specific efficiencies (Power-to-Liquid PtL carbon conversion) product volumes and investment operating and net production costs (NPC) is investigated. Furthermore process routes reducing the CO2 content in the Fischer Tropsch feed gas are elaborated implementing a CO2 separation unit or recycle streams back to the rWGS reactor. Unexpectedly CO2 capture and recycle streams back to the rWGS show no significant impact on the performance of each process scenario particularly in terms of the product quantity. However lower PtL efficiencies and higher NPC are noticeable for these cases. The techno-economic assessment reveals that the use of a SOEC and an electrified rWGS reactor offers the technologically best and economically most optimized process chain with NPC of 8.40 EUR/kgsyncrude a PtL efficiency of 54% and a carbon conversion of 85%.
A Review of the Integrated Renewable Energy Systems for Sustainable Urban Mobility
Aug 2022
Publication
Several challenges have emerged due to the increasing deterioration of urban mobility and its severe impacts on the environment and human health. Primary dependence on internal combustion engines that use petrol or diesel has led to poor air quality time losses noise traffic jams and further environmental pollution. Hence the transitions to using rail and or seaway-based public transportation cleaner fuels and electric vehicles are some of the ultimate goals of urban and national decision-makers. However battery natural gas hybrid and fuel cell vehicles require charging stations to be readily available with a sustainable energy supply within urban regions in different residential and business neighborhoods. This study aims to provide an updated and critical review of the concept and recent examples of urban mobility and transportation modes. It also highlights the adverse impacts of several air pollutants emitted from internal combustion engine vehicles. It also aims to shed light on several possible systems that integrate the electric vehicle stations with renewable energy sources. It was found that using certain components within the integrated system and connecting the charging stations with a grid can possibly provide an uninterrupted power supply to electric vehicles leading to less pollution which would encourage users to use more clean vehicles. In addition the environmental impact assessments as well as several implementation challenges are discussed. To this end the main implementation issues related to consumer incentives infrastructure and recommendations are also reported.
Fuel Cell Solution for Marine Applications
Sep 2021
Publication
With future regulations on the horizon port authorities and ship owners/operators are looking at alternative propulsion solutions to reduce emission. Fuel cell technology provides an attractive zeroemission solution to generate electric power on board using hydrogen as a fuel. Fuel cell systems are scalable from 200kW to multi-MW providing high efficiency dispatchable clean quiet power generation. Several innovative pilot projects are on the way to demonstrate the marine application of this proven technology. Electrification of propulsion systems is advancing and fuel cell technology provides the opportunity to produce on board large quantity of power with zero-emission using hydrogen as a fuel. We will present the value proposition of having a fuel cell power generator on board of an electric vessel while discussing the safety considerations with the fuel cell module and the onboard fuel storage. We will present some of our current fuel cell marine projects and review some of the product development considerations including system architecture and safety as well as hydrogen supply and on-board fuel storage.
Life Cycle Assessment of Electric Vehicles and Hydrogen Fuel Cell Vehicles Using the GREET Model—A Comparative Study
Apr 2021
Publication
Facing global warming and recent bans on the use of diesel in vehicles there is a growing need to develop vehicles powered by renewable energy sources to mitigate greenhouse gas and pollutant emissions. Among the various forms of non-fossil energy for vehicles hydrogen fuel is emerging as a promising way to combat global warming. To date most studies on vehicle carbon emissions have focused on diesel and electric vehicles (EVs). Emission assessment methodologies are usually developed for fast-moving consumer goods (FMCG) which are non-durable household goods such as packaged foods beverages and toiletries instead of vehicle products. There is an increase in the number of articles addressing the product carbon footprint (PCF) of hydrogen fuel cell vehicles in the recent years while relatively little research focuses on both vehicle PCF and fuel cycle. Zero-emission vehicles initiative has also brought the importance of investigating the emission throughout the fuel cycle of hydrogen fuel cell and its environmental impact. To address these gaps this study uses the life-cycle assessment (LCA) process of GREET (greenhouse gases regulated emissions and energy use in transportation) to compare the PCF of an EV (Tesla Model 3) and a hydrogen fuel cell car (Toyota MIRAI). According to the GREET results the fuel cycle contributes significantly to the PCF of both vehicles. The findings also reveal the need for greater transparency in the disclosure of relevant information on the PCF methodology adopted by vehicle manufacturers to enable comparison of their vehicles’ emissions. Future work will include examining the best practices of PCF reporting for vehicles powered by renewable energy sources as well as examining the carbon footprints of hydrogen production technologies based on different methodologies.
Future of Electric and Hydrogen Cars and Trucks: An Overview
Apr 2023
Publication
The negative consequences of toxic emissions from internal combustion engines energy security climate change and energy costs have led to a growing demand for clean power sources in the automotive industry. The development of eco-friendly vehicle technologies such as electric and hydrogen vehicles has increased. This article investigates whether hydrogen vehicles will replace electric vehicles in the future. The results showed that fuel-cell cars are unlikely to compete with electric cars. This is due to the advancements in electric vehicles and charging infrastructure which are becoming more cost-effective and efficient. Additionally the technical progress in battery electric vehicles (BEVs) is expected to reduce the market share of fuel-cell electric vehicles (FCEVs) in passenger vehicles. However significant investments have been made in hydrogen cars. Many ongoing investments seem to follow the sunk cost fallacy where decision-makers continue to invest in an unprofitable project due to their already invested resources. Furthermore even with megawatt charging fuel-cell trucks cost more than battery-powered electric trucks. The use cases for fuel-cell electric trucks are also much more limited as their running expenses are higher compared to electric cars. Hydrogen vehicles may be beneficial for heavy transport in remote areas. However it remains to be seen if niche markets are large enough to support fuel-cell electric truck commercialization and economies of scale. In summary we believe that hydrogen vehicles will not replace electric cars and trucks at least before 2050.
Cold Start Cycling Durability of Fuel Cell Stacks for Commercial Automotive Applications
Sep 2022
Publication
System durability is crucial for the successful commercialization of polymer electrolyte fuel cells (PEFCs) in fuel cell electric vehicles (FCEVs). Besides conventional electrochemical cycling durability during long-term operation the effect of operation in cold climates must also be considered. Ice formation during start up in sub-zero conditions may result in damage to the electrocatalyst layer and the polymer electrolyte membrane (PEM). Here we conduct accelerated cold start cycling tests on prototype fuel cell stacks intended for incorporation into commercial FCEVs. The effect of this on the stack performance is evaluated the resulting mechanical damage is investigated and degradation mechanisms are proposed. Overall only a small voltage drop is observed after the durability tests only minor damage occurs in the electrocatalyst layer and no increase in gas crossover is observed. This indicates that these prototype fuel cell stacks successfully meet the cold start durability targets for automotive applications in FCEVs.
On the Road to Sustainable Transport: Acceptance and Preferences for Renewable Fuel Production Infrastructure
Sep 2022
Publication
To abate climate change and ameliorate the air quality in urban areas innovative solutions are required to reduce CO2 and pollutant emissions from traffic. Alternative fuels made from biomass or CO2 and hydrogen can contribute to these goals by substituting fossil gasoline or diesel in combustion engines. Using a conjoint analysis approach the current study investigates preferences of laypeople (n = 303) for fuel production facilities in terms of siting location plant size raw material used in the production and raw material transport. The location was most decision-relevant followed by raw material transport whereas plant size and type of raw material played a less prominent role for the preference choice. The best-case scenario from the point of view of acceptance would be the installation of a rather small bio-hybrid fuel production plant in an industrial area (instead of an agricultural or pristine environment). No transport or transport via underground pipeline were preferred over truck/tank car or overground pipeline. The findings can be used as a basis for planning and decision-making for designing production networks for new fuel types.
Synthetic Fuels in the German Industry Sector Depending on Climate Protection Level
Aug 2021
Publication
Especially the electrification of the industry sector is highly complex and challenging mainly due to process-specific requirements. In this context there are several industrial processes where the direct and indirect use of electricity is subject to technical restrictions. In order to achieve the national climate goals the fossil energy consumption remaining after the implementation of efficiency and sufficiency measures as well as direct electrification has to be substituted through hydrogen and synthetic gaseous liquid and solid hydrocarbons. As the main research object the role of synthetic fuels in industrial transformation paths is investigated and analyzed by combining individual greenhouse gas abatement measures within the Sector Model Industry. Sector Model Industry is an energy consumption model that performs discrete deterministic energy and emission dynamic calculations with a time horizon up to 2050 at macroeconomic level. The results indicate that the use of synthetic fuels can be expected with a high level of climate protection. The industrial CO2 target in the model makes it necessary to replace CO2 -intensive fossil with renewable fuels. The model uses a total of 163 TWh of synthetic fuels in the climate protection scenario and thus achieves an 88% decrease in CO2 emissions in 2050 compared to 1990. This means that the GHG abatement achieved in industry is within the range of the targeted CO2 mitigation of the overall system in Germany of between 80 and 95% in 2050 compared to 1990. Due to technical restrictions the model mainly uses synthetic methane instead of hydrogen (134 TWh). The results show that despite high costs synthetic fuels are crucial for defossilization as a fall back option in the industrial scenario considering high climate ambition. The scenario does not include hydrogen technologies for heat supply. Accordingly the climate protection scenario uses hydrogen only in the steel industry for the direct reduction of iron (21 TWh). 8 TWh of synthetic oil substitute the same amount of fossil oil in the climate protection scenario. A further analysis conducted on the basis of the model results shows that transformation in the energy system and the use of smart ideas concepts and technologies are a basic prerequisite for enabling the holistic defossilisation of industry. The findings in the research can contribute to the cost-efficient use of synthetic fuels in industry and thus serve as a basis for political decision making. Moreover the results may have a practical relevance not only serving as a solid comparison base for the outcome of other studies but also as input data for further simulation of energy system transformation paths.
Coordinated Control of a Wind-Methanol-Fuel Cell System with Hydrogen Storage
Dec 2017
Publication
This paper presents a wind-methanol-fuel cell system with hydrogen storage. It can manage various energy flow to provide stable wind power supply produce constant methanol and reduce CO2 emissions. Firstly this study establishes the theoretical basis and formulation algorithms. And then computational experiments are developed with MATLAB/Simulink (R2016a MathWorks Natick MA USA). Real data are used to fit the developed models in the study. From the test results the developed system can generate maximum electricity whilst maintaining a stable production of methanol with the aid of a hybrid energy storage system (HESS). A sophisticated control scheme is also developed to coordinate these actions to achieve satisfactory system performance.
Thermoacoustic Combustion Stability Analysis of a Bluff Body-Stabilized Burner Fueled by Methane–Air and Hydrogen–Air Mixtures
Apr 2023
Publication
Hydrogen can play a key role in the gradual transition towards a full decarbonization of the combustion sector e.g. in power generation. Despite the advantages related to the use of this carbon-free fuel there are still several challenging technical issues that must be addressed such as the thermoacoustic instability triggered by hydrogen. Given that burners are usually designed to work with methane or other fossil fuels it is important to investigate their thermoacoustic behavior when fueled by hydrogen. In this framework the present work aims to propose a methodology which combines Computational Fluid Dynamics CFD (3D Reynolds-Averaged Navier-Stokes (RANS)) and Finite Element Method (FEM) approaches in order to investigate the fluid dynamic and the thermoacoustic behavior introduced by hydrogen in a burner (a lab-scale bluff body stabilized burner) designed to work with methane. The case of CH4 -air mixture was used for the validation against experimental results and benchmark CFD data available in the literature. Numerical results obtained from CFD simulations namely thermofluidodynamic properties and flame characteristics (i.e. time delay and heat release rate) are used to evaluate the effects of the fuel change on the Flame Response Function to the acoustic perturbation by means of a FEM approach. As results in the H2 -air mixture case the time delay decreases and heat release rate increases with respect to the CH4 -air mixture. A study on the Rayleigh index was carried out in order to analyze the influence of H2 -air mixture on thermoacoustic instability of the burner. Finally an analysis of both frequency and growth rate (GR) on the first four modes was carried out by comparing the two mixtures. In the H2 -air case the modes are prone to become more unstable with respect to the same modes of the case fueled by CH4 -air due to the change in flame topology and variation of the heat release rate and time delay fields.
Technological Pathways for Decarbonizing Petroleum Refining
Sep 2021
Publication
This paper discusses the technical specifications of how U.S. petroleum refineries can reduce facility emissions and shift to produce low-carbon fuels for hard to abate sectors by utilizing existing innovative technologies.
Fuel Cell Hybrid Model for Predicting Hydrogen Inflow through Energy Demand
Nov 2019
Publication
Hydrogen-based energy storage and generation is an increasingly used technology especially in renewable systems because they are non-polluting devices. Fuel cells are complex nonlinear systems so a good model is required to establish efficient control strategies. This paper presents a hybrid model to predict the variation of H2 flow of a hydrogen fuel cell. This model combining clusters’ techniques to get multiple Artificial Neural Networks models whose results are merged by Polynomial Regression algorithms to obtain a more accurate estimate. The model proposed in this article use the power generated by the fuel cell the hydrogen inlet flow and the desired power variation to predict the necessary variation of the hydrogen flow that allows the stack to reach the desired working point. The proposed algorithm has been tested on a real proton exchange membrane fuel cell and the results show a great precision of the model so that it can be very useful to improve the efficiency of the fuel cell system.
Performance and Weight Parameters Calculation for Hydrogen and Battery-Powered Aircraft Concepts
May 2023
Publication
This article describes the creation of a program that would be useful for calculating mathematical models in order to estimate the weight of aircraft components. Using several parameters it can calculate other parameters of civil transport aircraft powered by batteries or fuel cells. The main goals of this research were to add the missing dimensions and parameters to the aircraft database create a simple but effective program for creating mathematical models and use this program to find technological barriers to battery or hydrogen fuel-cell-powered aircraft concepts. The article introduces the reader to the problem of calculating OEW (operating empty weight) using Breguet– Leduc equations. A calculation model was created for OEW calculation. The result of this work is the verification of a mathematical model for battery-powered electric aircraft of the CS-23 (European Aviation Safety Agency Certification Specification for Normal Utility Aerobatic and Commuter Category Aeroplanes) category by comparing the program’s outputs with real aircraft. Subsequently the results of mathematical models are shown in graphs that specify the space of possible concepts of aircraft powered by batteries or fuel cells sorted by the number of passengers and the range of the aircraft delimited by two or three criteria respectively.
Alternative Sources of Energy in Transport: A Review
May 2023
Publication
Alternative sources of energy are on the rise primarily because of environmental concerns in addition to the depletion of fossil fuel reserves. Currently there are many alternatives approaches and attempts to introduce alternative energy sources in the field of transport. This article centers around the need to explore additional energy sources beyond the current ones in use. It delves into individual energy sources that can be utilized for transportation including their properties production methods and the advantages and disadvantages associated with their use across different types of drives. The article not only examines the situation in the Czech Republic but also in other nations. In addition to addressing future mobility the thesis also considers how the utilization of new energy sources may impact the environment.
Towards a Prioritization of Alternative Energy Sources for Sustainable Shipping
Apr 2023
Publication
Studies on the prospects of the use of alternative fuels in the maritime industry have rarely been assessed in the context of developing countries. This study assesses seven energy sources for shipping in the context of Bangladesh with a view to ranking their prospects based on sustainability as well as identifying the energy transition criteria. Data were collected from maritime industry experts including seafarers shipping company executives government representatives and academics. The Bayesian Best-Worst Method (BWM) was used for ranking nine criteria related to the suitability and viability of the considered alternative energy sources. Next the PROMETHEE-GAIA method is applied for priority analysis of the seven energy alternatives. The findings reveal that capital cost alternative energy price and safety are the most important factors for alternative energy transition in Bangladesh. Apart from the benchmark HFO Liquified Natural Gas (LNG) HFO-Wind and LNG-Wind hybrids are considered the most viable alternatives. The findings of the study can guide policymakers in Bangladesh in terms of promoting viable energy sources for sustainable shipping.
Environmental Life-Cycle Assessment of Eco-Friendly Alternative Ship Fuels (MGO, LNG, and Hydrogen) for 170 GT Nearshore Ferry
May 2022
Publication
With increasing concerns about environmental pollution the shipping industry has been considering various fuels as alternative power sources. This paper presents a study of the holistic environmental impacts of eco-friendly alternative ship fuels of marine gas oil (MGO) liquefied natural gas (LNG) and hydrogen across each of their life cycles from their production to the operation of the ship. The environmental impacts of the fuels were estimated by life-cycle assessment (LCA) analysis in the categories of well-to-tank tank-to-wake and well-to-wake phases. The LCA analysis was targeted for a 170 gross tonnage (GT) nearshore ferry operating in the ROK which was conceptually designed in the study to be equipped with the hydrogen fuel cell propulsion system. The environmental impact performance was presented with comparisons for the terms of global warming potential (GWP) acidification potential (AP) photochemical ozone creation potential (POCP) eutrophication potential (EP) and particulate matter (PM). The results showed that the hydrogen showed the highest GWP level during its life cycle due to the large amount of emissions in the hydrogen generation process through the steam methane reforming (SMR) method. The paper concludes with suggestions of an alternative fuel for the nearshore ferry and its production method based on the results of the study.
Greenhouse Gas Emissions Performance of Electric, Hydrogen and Fossil-Fuelled Freight Trucks with Uncertainty Estimates Using a Probabilistic Life-Cycle Assessment (pLCA)
Jan 2024
Publication
This research conducted a probabilistic life-cycle assessment (pLCA) into the greenhouse gas (GHG) emissions performance of nine combinations of truck size and powertrain technology for a recent past and a future (largely decarbonised) situation in Australia. This study finds that the relative and absolute life-cycle GHG emissions performance strongly depends on the vehicle class powertrain and year of assessment. Life-cycle emission factor distributions vary substantially in their magnitude range and shape. Diesel trucks had lower life-cycle GHG emissions in 2019 than electric trucks (battery hydrogen fuel cell) mainly due to the high carbon-emission intensity of the Australian electricity grid (mainly coal) and hydrogen production (mainly through steam–methane reforming). The picture is however very different for a more decarbonised situation where battery electric trucks in particular provide deep reductions (about 75–85%) in life-cycle GHG emissions. Fuel-cell electric (hydrogen) trucks also provide substantial reductions (about 50–70%) but not as deep as those for battery electric trucks. Moreover hydrogen trucks exhibit the largest uncertainty in emissions performance which reflects the uncertainty and general lack of information for this technology. They therefore carry an elevated risk of not achieving the expected emission reductions. Battery electric trucks show the smallest (absolute) uncertainty which suggests that these trucks are expected to deliver the deepest and most robust emission reductions. Operational emissions (on-road driving and vehicle maintenance combined) dominate life-cycle emissions for all vehicle classes. Vehicle manufacturing and upstream emissions make a relatively small contribution to life-cycle emissions from diesel trucks (
Emission Reduction and Cost-benefit Analysis of the Use of Ammonia and Green Hydrogen as Fuel for Marine Applications
Dec 2023
Publication
Increasingly stringent emission standards have led shippers and port operators to consider alternative energy sources which can reduce emissions while minimizing capital investment. It is essential to understand whether there is a certain economic investment gap for alternative energy. The present work mainly focuses on the simulation study of ships using ammonia and hydrogen fuels arriving at Guangzhou Port to investigate the emission advantages and cost-benefit analysis of ammonia and hydrogen as alternative fuels. By collecting actual data and fuel consumption emissions of ships arriving at Guangzhou Port the present study calculated the pollutant emissions and cost of ammonia and hydrogen fuels substitution. As expected it is shown that with the increase of NH3 in fuel mixed fuels will effectively reduce CO and CO2 emissions. Compared to conventional fuel the injection of NH3 increases the NOx emission. However the cost savings of ammonia fuel for CO2 SOx and PM10 reduction are higher than that for NOx. In terms of pollutants ammonia is less expensive than conventional fuels when applied to the Guangzhou Port. However the cost of fuel supply is still higher than conventional energy as ammonia has not yet formed a complete fuel supply and storage system for ships. On the other hand hydrogen is quite expensive to store and transport resulting in higher overall costs than ammonia and conventional fuels even if no pollutants are produced. At present conventional fuels still have advantage in terms of cost. With the promotion of ammonia fuel technology and application the cost of supply will be reduced. It is predicted that by 2035 ammonia will not only have emission reduction benefits but also will have a lower overall economic cost than conventional fuels. Hydrogen energy will need longer development and technological breakthroughs due to the limitation of storage conditions.
Evaluation of Hydrogen Addition on Combustion and Emission Characteristics of Dual-Fuel Diesel Engines with Different Compression Ratios
Sep 2023
Publication
In this paper a computational fluid dynamics (CFD) model was established and verified on the basis of experimental results and then the effect of hydrogenation addition on combustion and emission characteristics of a diesel–hydrogen dual-fuel engine fueled with hydrogenation addition (0% 5% and 10%) under different hydrogenation energy shares (HESs) and compression ratios (CRs) were investigated using CONVERGE3.0 software. And this work assumed that the hydrogen and air were premixed uniformly. The correctness of the simulation model was verified by experimental data. The values of HES are in the range of 0% 5% 10% and 15%. And the values of CR are in the range of 14 16 18 and 20. The results of this study showed that the addition of hydrogen to diesel fuel has a significant effect on the combustion characteristics and the emission characteristics of diesel engines. When the HES was 15% the in-cylinder pressure increased by 10.54%. The in-cylinder temperature increased by 15.11%. When the CR was 20 the in-cylinder pressure and the in-cylinder temperature increased by 66.10% and 13.09% respectively. In all cases HC CO CO2 and soot emissions decreased as the HES increased. But NOx emission increased.
Deploying Green Hydrogen to Decarbonize China's Coal Chemical Sector
Dec 2023
Publication
China’s coal chemical sector uses coal as both a fuel and feedstock and its increasing greenhouse gas (GHG) emissions are hard to abate by electrification alone. Here we explore the GHG mitigation potential and costs for onsite deployment of green H2 and O2 in China’s coal chemical sector using a lifecycle assessment and techno-economic analyses. We estimate that China’s coal chemical production resulted in GHG emissions of 1.1 gigaton CO2 equivalent (GtCO2eq) in 2020 equal to 9% of national emissions. We project GHG emissions from China’s coal chemical production in 2030 to be 1.3 GtCO2eq ~50% of which can be reduced by using solar or wind power-based electrolytic H2 and O2 to replace coal-based H2 and air separation-based O2 at a cost of 10 or 153 Chinese Yuan (CNY)/tCO2eq respectively. We suggest that provincial regions determine whether to use solar or wind power for water electrolysis based on lowest cost options which collectively reduce 53% of the 2030 baseline GHG emissions at a cost of 9 CNY/tCO2eq. Inner Mongolia Shaanxi Ningxia and Xinjiang collectively account for 52% of total GHG mitigation with net cost reductions. These regions are well suited for pilot policies to advance demonstration projects.
Industrial Development Status and Prospects of the Marine Fuel Cell: A Review
Jan 2023
Publication
In the context of the increasingly strict pollutant emission regulations and carbon emission reduction targets proposed by the International Maritime Organization the shipping industry is seeking new types of marine power plants with the advantages of high efficiency and low emissions. Among the possible alternatives the fuel cell is considered to be the most practical technology as it provides an efficient means to generate electricity with low pollutant emissions and carbon emissions. Very few comprehensive reviews focus on the maritime applications of the fuel cell. Thus news reports and literature on the maritime applications of the fuel cell in the past sixty years were collected and the industrial development status and prospects of the marine fuel cell were summarized as follows. Some countries in Europe North America and Asia have invested heavily in researching and developing the marine fuel cell and a series of research projects have achieved concrete results such as the industrialized marine fuel cell system or practical demonstration applications. At present the worldwide research of the marine fuel cell focuses more on the proton exchange membrane fuel cell (PEMFC). However the power demand of the marine fuel cell in the future will show steady growth and thus the solid oxide fuel cell (SOFC) with the advantages of higher power and fuel diversity will be the mainstream in the next research stage. Although some challenges exist the SOFC can certainly lead the upgrading and updating of the marine power system with the cooperative efforts of the whole world.
Economic Prospects of Taxis Powered by Hydrogen Fuel Cells in Palestine
Feb 2024
Publication
Recently major problems related to fuel consumption and greenhouse gas (GHG) emissions have arisen in the transportation sector. Therefore developing transportation modes powered by alternative fuels has become one of the main targets for car manufacturers and governments around the world. This study aimed to investigate the economic prospects of using hydrogen fuel cell technology in taxi fleets in Westbank. For this purpose a model that could predict the number of taxis was developed and the expected economic implications of using hydrogen fuel cell technology in taxi fleets were determined based on the expected future fuel consumption and future fuel cost. After analysis of the results it was concluded that a slight annual increase in the number of taxis in Palestine is expected in the future due to the government restrictions on issuing new taxi permits in order to get this sector organized. Furthermore using hydrogen fuel cells in taxi fleets is expected to become more and more feasible over time due to the expected future increase in oil price and the expected significant reduction in hydrogen cost as a result of the new technologies that are expected to be used in the production and handling of hydrogen.
Experimental Investigations of the Hydrogen Injectors on the Combustion Characteristics and Performance of a Hydrogen Internal Combustion Engine
Feb 2024
Publication
Hydrogen is regarded as an ideal zero-carbon fuel for an internal combustion engine. However the low mass flow rate of the hydrogen injector and the low volume heat value of the hydrogen strongly restrict the enhancement of the hydrogen engine performance. This experimental study compared the effects of single-injectors and double-injectors on the engine performance combustion pressure heat release rate and the coefficient of variation (CoVIMEP) based on a singlecylinder 0.5 L port fuel injection hydrogen engine. The results indicated that the number of hydrogen injectors significantly influences the engine performance. The maximum brake power is improved from 4.3 kW to 6.12 kW when adding the injector. The test demonstrates that the utilization of the double-injector leads to a reduction in hydrogen obstruction in the intake manifold consequently minimizing the pumping losses. The pump mean effective pressure decreased from −0.049 MPa in the single-injector condition to −0.029 MPa in the double-injector condition with the medium loads. Furthermore the double-injector exhibits excellent performance in reducing the coefficient of variation. The maximum CoVIMEP decreased from 2.18% in the single-injector configuration to 1.92% in the double-injector configuration. This result provides new insights for optimizing hydrogen engine injector design and optimizing the combustion process.
Challenges and Solutions of Hydrogen Fuel Cells in Transportation Systems: A Review and Prospects
Jun 2023
Publication
Conventional transportation systems are facing many challenges related to reducing fuel consumption noise and pollutants to satisfy rising environmental and economic criteria. These requirements have prompted many researchers and manufacturers in the transportation sector to look for cleaner more efficient and more sustainable alternatives. Powertrains based on fuel cell systems could partially or completely replace their conventional counterparts used in all modes of transport starting from small ones such as scooters to large mechanisms such as commercial airplanes. Since hydrogen fuel cells (HFCs) emit only water and heat as byproducts and have higher energy conversion efficiency in comparison with other conventional systems it has become tempting for many scholars to explore their potential for resolving the environmental and economic concerns associated with the transportation sector. This paper thoroughly reviews the principles and applications of fuel cell systems for the main transportation schemes including scooters bicycles motorcycles cars buses trains and aerial vehicles. The review showed that fuel cells would soon become the powertrain of choice for most modes of transportation. For commercial long-rage airplanes however employing fuel cells will be limited due to the replacement of the axillary power unit (APU) in the foreseeable future. Using fuel cells to propel such large airplanes would necessitate redesigning the airplane structure to accommodate the required hydrogen tanks which could take a bit more time.
Experimental Analysis of the Effects of Ship Motion on Hydrogen Dispersion in an Enclosed Area
Apr 2023
Publication
This study aims to experimentally quantify the hydrogen diffusion characteristics by ship motion. Hydrogen leakage experiments were conducted under various ship motion conditions and the corresponding hydrogen concentrations for each sensor were expressed by an equation. The experimental facility was a scale model of the hydrogen fuel storage room of a ship. An experiment was conducted by implementing the roll and pitch motions of the ship as well as motion direction using a ship simulator. In the equation describing the hydrogen concentration the minimum and maximum root mean square deviations were 0.987 and 0.707 respectively and the correlations were 0.000109 and 0.0012289. Although the results differed as per the sensor location the hydrogen concentration was affected by the motion period of the ship. The experimental results and prediction equations can be useful for sensor and vent location selection by predicting the concentration when hydrogen leaks in ships in motion.
Optimal Capacity Configuration of Wind–Solar Hydrogen Storage Microgrid Based on IDW-PSO
Aug 2023
Publication
Because the new energy is intermittent and uncertain it has an influence on the system’s output power stability. A hydrogen energy storage system is added to the system to create a wind light and hydrogen integrated energy system which increases the utilization rate of renewable energy while encouraging the consumption of renewable energy and lowering the rate of abandoning wind and light. Considering the system’s comprehensive operation cost economy power fluctuation and power shortage as the goal considering the relationship between power generation and load assigning charging and discharging commands to storage batteries and hydrogen energy storage and constructing a model for optimal capacity allocation of wind–hydrogen microgrid system. The optimal configuration model of the wind solar and hydrogen microgrid system capacity is constructed. A particle swarm optimization with dynamic adjustment of inertial weight (IDW-PSO) is proposed to solve the optimal allocation scheme of the model in order to achieve the optimal allocation of energy storage capacity in a wind–hydrogen storage microgrid. Finally a microgrid system in Beijing is taken as an example for simulation and solution and the results demonstrate that the proposed approach has the characteristics to optimize the economy and improve the capacity of renewable energy consumption realize the inhibition of the fluctuations of power reduce system power shortage and accelerate the convergence speed.
Caveats of Green Hydrogen for Decarbonisation of Heating in Buildings
Oct 2023
Publication
Hydrogen (H2) has rapidly become a topic of great attention when discussing routes to net-zero carbon emissions. About 14% of CO2 emissions globally are directly associated with domestic heating in buildings. Replacing natural gas (NG) with H2 for heating has been highlighted as a rapid alternative for mitigating these emissions. To realise this not only the production challenges but also potential obstacles in the transmission/distribution and combustion of H2 must be technically identified and discussed. This review in addition to delineating the challenges of H2 in NG grid pipelines and H2 combustion also collates the results of the state-of-the-art technologies in H2-based heating systems. We conclude that the sustainability of water and renewable electricity resources strongly depends on sizing siting service life of electrolysis plants and post-electrolysis water disposal plans. 100% H2 in pipelines requires major infrastructure upgrades including production transmission pressurereduction stations distribution and boiler rooms. H2 leakage instigates more environmental risks than economic ones. With optimised boilers burning H2 could reduce GHG emissions and obtain an appropriate heating efficiency; more data from boiler manufacturers must be provided. Overall green H2 is not the only solution to decarbonise heating in buildings and it should be pursued abreast of other heating technologies.
CO2 Emissions of Battery Electric Vehicles and Hydrogen Fuel Cell Vehicles
Jun 2023
Publication
During the last few years electric and hydrogen vehicles have become an alternative to cars that use internal combustion engines. The number of electric and hydrogen vehicles sold has increased due to support from local governments and because car manufacturers will stop the production of internal combustion engines in the near future. The emissions of these vehicles while being driven are zero but they still have an impact on the environment due to their fuel. In this article an analysis of carbon dioxide (CO2 ) emissions for two types of vehicles: battery electric vehicles (BEVs) powered by electricity and fuel cell electric vehicles (FCEVs) powered by hydrogen is presented. The analysis considers different values for the mix of power generation and hydrogen production options in comparison to other studies. The CO2 emissions were calculated and compared for the two types of vehicles. The results show that the CO2 emissions of BEVs are lower when compared to FCEVs if the hydrogen is obtained from pollutant sources and is higher if the hydrogen is obtained from nuclear power and renewable energy sources. When compared to conventional combustion engine vehicles BEVs have lower CO2 emissions while the emissions of FCEVs are dependent on the hydrogen production method.
Fuelling the Future: An In-depth Review of Recent Trends, Challenges and Opportunities of Hydrogen Fuel Cell for a Sustainable Hydrogen Economy
Sep 2023
Publication
Hydrogen has gained tremendous momentum worldwide as an energy carrier to transit to a net zero emission energy sector. It has been widely adopted as a promising large-scale renewable energy (RE) storage solution to overcome RE resources’ variability and intermittency nature. The fuel cell (FC) technology became in focus within the hydrogen energy landscape as a cost-effective pathway to utilize hydrogen for power generation. Therefore FC technologies’ research and development (R&D) expanded into many pathways such as cost reduction efficiency improvement fixed and mobile applications lifetime safety and regulations etc. Many publications and industrial reports about FC technologies and applications are available. This raised the necessity for a holistic review study to summarize the state-of-the-art range of FC stacks such as manufacturing the balance of plant types technologies applications and R&D opportunities. At the beginning the principal technologies to compare the well known types followed by the FC operating parameters are presented. Then the FC balance of the plant i.e. building components and materials with its functionality and purpose types and applications are critically reviewed with their limitations and improvement opportunities. Subsequently the electrical properties of FCs with their key features including advantages and disadvantages were investigated. Applications of FCs in different sectors are elaborated with their key characteristics current status and future R&D opportunities. Economic attributes of fuel cells with a pathway towards low cost are also presented. Finally this study identifies the research gaps and future avenues to guide researchers and the hydrogen industry.
Assessing the Potential of Decarbonization Options for Industrial Sectors
Jan 2024
Publication
Industry emits around a quarter of global greenhouse gas (GHG) emissions. This paper presents the first comprehensive review to identify the main decarbonization options for this sector and their abatement potentials. First we identify the important GHG emitting processes and establish a global average baseline for their current emissions intensity and energy use. We then quantify the energy and emissions reduction potential of the most significant abatement options as well as their technology readiness level (TRL). We find that energy-intensive industries have a range of decarbonization technologies available with medium to high TRLs and mature options also exist for decarbonizing low-temperature heat across a wide range of industrial sectors. However electrification and novel process change options to reduce emissions from high-temperature and sector-specific processes have much lower TRLs in comparison. We conclude by highlighting important barriers to the deployment of industrial decarbonization options and identifying future research development and demonstration needs.
Heat Integration of Liquid Hydrogen-Fueled Hybrid Electric Ship Propulsion System
Nov 2023
Publication
This study introduced the methodology for integrating ethylene glycol/water mixture (GW) systems which supply heat energy to the liquid hydrogen (LH2 ) fuel gas supply system (FGSS) and manage the temperature conditions of the battery system. All systems were designed and simulated based on the power demand of a 2 MW class platform supply vessel assumed as the target ship. The LH2 FGSS model is based on Aspen HYSYS V14 and the cell model that makes up the battery system is implemented based on a Thevenin model with four parameters. Through three different simulation cases the integrated GW system significantly reduced electric power consumption for the GW heater during ship operations achieving reductions of 1.38% (Case 1) 16.29% (Case 2) and 27.52% (Case 3). The energy-saving ratio showed decreases of 1.86% (Case 1) 21.01% (Case 2) and 33.80% (Case 3) in overall energy usage within the GW system. Furthermore an examination of the battery system’s thermal management in the integrated GW system demonstrated stable cell temperature control within ±3 K of the target temperature making this integration a viable solution for maintaining normal operating temperatures despite relatively higher fluctuations compared to an independent GW system.
Carbon-Free Heat Production for High-Temperature Heating Systems
Oct 2023
Publication
The article presents a new carbon-free heat production technology for district heating which consists of a combined heat and power generation fuel cell (FC CHP) with CO2 capture and a two-stage cascade high-temperature heat pump (TCHHP). The FC generates heat and electricity the latter being used to drive the compressors of the TCHHP. During the winter period the water temperature achieved can occasionally be too low so it would be heated up with hydrogen gas boilers. The hydrogen would be produced by reforming natural gas synthetic methane or biogas. The results are presented with natural gas utilization—the ratio between the obtained heat flow transferred directly to the water for district heating and the input heat flow of natural gas. In the case of a return water temperature of 60 ◦C and district heating temperature of 85 ◦C the TCHHP whose heat source is groundwater achieves plant efficiency of 270.04% in relation to the higher heating value (HHV) and 241.74% in relation to the lower heating value (LHV) of natural gas. A case with a TCHHP whose heat source is low-temperature geothermal water achieves a plant efficiency of 361.36% in relation to the HHV and 323.49% in relation to the LHV
No more items...