Applications & Pathways
Life Cycle Cost Analysis of an Autonomous Underwater Vehicle that Employs Hydrogen Fuel Cell
Feb 2024
Publication
The use of autonomous vehicles for marine and submarine work has risen considerably in the last decade. Developing new monitoring systems navigation and communications technologies allows a wide range of operational possibilities. Autonomous Underwater Vehicles (AUVs) are being used in offshore missions and applications with some innovative purposes by using sustainable and green energy sources. This paper considers an AUV that uses a hydrogen fuel cell achieving zero emissions. This paper analyses the life cycle cost of the UAV and compares it with a UAV powered by conventional energy. The EN 60300-3-3 guidelines have been employed to develop the cost models. The output results show estimations for the net present value under different scenarios and financial strategies. The study has been completed with the discount rate sensibility analysis in terms of financial viability.
Ammonia as Hydrogen Carrier for Transportation; Investigation of the Ammonia Exhaust Gas Fuel Reforming
Jun 2013
Publication
In this paper we show for the first time the feasibility of ammonia exhaust gas reforming as a strategy for hydrogen production used in transportation. The application of the reforming process and the impact of the product on diesel combustion and emissions were evaluated. The research was started with an initial study of ammonia autothermal reforming (NH3 e ATR) that combined selective oxidation of ammonia (into nitrogen and water) and ammonia thermal decomposition over a ruthenium catalyst using air as the oxygen source. The air was later replaced by real diesel engine exhaust gas to provide the oxygen needed for the exothermic reactions to raise the temperature and promote the NH3 decomposition. The main parameters varied in the reforming experiments are O2/NH3 ratios NH3 concentration in feed gas and gas e hourly e space e velocity (GHSV). The O2/NH3 ratio and NH3 concentration were the key factors that dominated both the hydrogen production and the reforming process efficiencies: by applying an O2/NH3 ratio ranged from 0.04 to 0.175 2.5e3.2 l/min of gaseous H2 production was achieved using a fixed NH3 feed flow of 3 l/min. The reforming reactor products at different concentrations (H2 and unconverted NH3) were then added into a diesel engine intake. The addition of considerably small amount of carbon e free reformate i.e. represented by 5% of primary diesel replacement reduced quite effectively the engine carbon emissions including CO2 CO and total hydrocarbons.
Jet Zero Strategy: Delivering Net Zero Aviation by 2050
Jul 2022
Publication
The Jet Zero strategy sets out how we will achieve net zero aviation by 2050.<br/>It focuses on the rapid development of technologies in a way that maintains the benefits of air travel whilst maximising the opportunities that decarbonisation can bring to the UK.<br/>The Jet Zero strategy includes a 5-year delivery plan setting out the actions that will need to be taken in the coming years to support the delivery of net zero aviation by 2050. We will be monitoring progress and reviewing and updating our strategy every 5 years.<br/>The strategy is informed by over 1500 responses to the Jet Zero consultation and the Jet Zero further technical consultation to which we have issued a summary of responses and government response.<br/>The Jet Zero investment flightpath is part of a series of roadmaps to be published over the course of 2022 for each sector of the Prime Minister’s Ten point plan for a green industrial revolution.<br/>It showcases the UK’s leading role in the development and commercialisation of new low and zero emission aviation technologies. It also highlights investment opportunities across systems efficiencies sustainable aviation fuels and zero emission aircraft.
Green Hydrogen Value Chain: Modelling of a PV Power Plant Integrated with H2 Production for Industry Application
Mar 2024
Publication
Based on the Sustainable Development Goals outlined in the 2030 agenda of the United Nations affordable and clean energy is one of the most relevant goals to achieve the decarbonization targets and break down the global climate change effects. The use of renewable energy sources namely solar energy is gaining attention and market share due to reductions in investment costs. Nevertheless it is important to overcome the energy storage problems mostly in industrial applications. The integration of photovoltaic power plants with hydrogen production and its storage for further conversion to usable electricity are an interesting option from both the technical and economic points of view. The main objective of this study is to analyse the potential for green hydrogen production and storage through PV production based on technical data and operational considerations. We also present a conceptual model and the configuration of a PV power plant integrated with hydrogen production for industry supply. The proposed power plant configuration identifies different pathways to improve energy use: supply an industrial facility supply the hydrogen production and storage unit sell the energy surplus to the electrical grid and provide energy to a backup battery. One of the greatest challenges for the proposed model is the component sizing and water electrolysis process for hydrogen production due to the operational requirements and the technology costs.
The Interaction between Short- and Long-Term Energy Storage in an nZEB Office Building
Mar 2024
Publication
The establishment of near-autonomous micro-grids in commercial or public building complexes is gaining increasing popularity. Short-term storage capacity is provided by means of large battery installations or more often by the employees’ increasing use of electric vehicle batteries which are allowed to operate in bi-directional charging mode. In addition to the above short-term storage means a long-term storage medium is considered essential to the optimal operation of the building’s micro-grid. The most promising long-term energy storage carrier is hydrogen which is produced by standard electrolyzer units by exploiting the surplus electricity produced by photovoltaic installation due to the seasonal or weekly variation in a building’s electricity consumption. To this end a novel concept is studied in this paper. The details of the proposed concept are described in the context of a nearly Zero Energy Building (nZEB) and the associated micro-grid. The hydrogen produced is stored in a high-pressure tank to be used occasionally as fuel in an advanced technology hydrogen spark ignition engine which moves a synchronous generator. A size optimization study is carried out to determine the genset’s rating the electrolyzer units’ capacity and the tilt angle of the rooftop’s photovoltaic panels which minimize the building’s interaction with the external grid. The hydrogen-fueled genset engine is optimally sized to 40 kW (0.18 kW/kWp PV). The optimal tilt angle of the rooftop PV panels is 39◦ . The maximum capacity of the electrolyzer units is optimized to 72 kW (0.33 kWmax/kWp PV). The resulting system is tacitly assumed to integrate to an external hydrogen network to make up for the expected mismatches between hydrogen production and consumption. The significance of technology in addressing the current challenges in the field of energy storage and micro-grid optimization is discussed with an emphasis on its potential benefits. Moreover areas for further research are highlighted aiming to further advance sustainable energy solutions.
Evaluating Fuel Cell vs. Battery Electric Trucks: Economic Perspectives in Alignment with China’s Carbon Neutrality Target
Mar 2024
Publication
The electrification of heavy-duty trucks stands as a critical and challenging cornerstone in the low-carbon transition of the transportation sector. This paper employs the total cost of ownership (TCO) as the economic evaluation metric framed within the context of China’s ambitious goals for heavy truck electrification by 2035. A detailed TCO model is developed encompassing not only the vehicles but also their related energy replenishing infrastructures. This comprehensive approach enables a sophisticated examination of the economic feasibility for different deployment contexts of both fuel cell and battery electric heavy-duty trucks emphasizing renewable energy utilization. This study demonstrates that in the context where both fuel cell components and hydrogen energy are costly fuel cell trucks (FCTs) exhibit a significantly higher TCO compared to battery electric trucks (BETs). Specifically for a 16 ton truck with a 500 km range the TCO for the FCT is 0.034 USD/tkm representing a 122% increase over its BET counterpart. In the case of a 49 ton truck designed for a 1000 km range the TCO for the FCT is 0.024 USD/tkm marking a 36% premium compared to the BET model. The technological roadmap suggests a narrowing cost disparity between FCTs and BETs by 2035. For the aforementioned 16 ton truck model the projected TCO for the FCT is expected to be 0.016 USD/tkm which is 58% above the BET and for the 49 ton variant it is anticipated at 0.012 USD per ton-kilometer narrowing the difference to just 4.5% relative to BET. Further analysis within this study on the influences of renewable energy pricing and operational range on FCT and BET costs highlights a pivotal finding: for the 49 ton truck achieving TCO parity between FCTs and BETs is feasible when renewable energy electricity prices fall to 0.022 USD/kWh or when the operational range extends to 1890 km. This underscores the critical role of energy costs and efficiency in bridging the cost gap between FCTs and BETs.
Comparative Life Cycle Assessment of Battery and Fuel Cell Electric Cars, Trucks, and Buses
Mar 2024
Publication
Addressing the pressing challenge of global warming reducing greenhouse gas emissions in the transportation sector is a critical imperative. Battery and fuel cell electric vehicles have emerged as promising solutions for curbing emissions in this sector. In this study we conducted a comprehensive life cycle assessment (LCA) for typical passenger vehicles heavy-duty trucks and city buses using either proton-exchange membrane fuel cells or Li-ion batteries with different cell chemistries. To ensure accuracy we supplemented existing studies with data from the literature particularly for the recycling phase as database limitations were encountered. Our results highlight that fuel cell and battery systems exhibit large emissions in the production phase. Recycling can significantly offset some of these emissions but a comparison of the technologies examined revealed considerable differences. Overall battery electric vehicles consistently outperform fuel cell electric vehicles regarding absolute greenhouse gas emissions. Hence we recommend prioritizing battery electric over fuel cell vehicles. However deploying fuel cell electric vehicles could become attractive in a hydrogen economy scenario where other factors e. g. the conversion and storage of surplus renewable electricity via electrolysis become important.
Jet Zero Strategy: One Year On
Jul 2023
Publication
This report sets out progress against our strategic framework for decarbonising aviation as well as the latest aviation emissions data and updated Jet Zero analysis.<br/>Among the significant milestones achieved since the Jet Zero strategy launch are the:<br/>- agreement at the International Civil Aviation Organization for a long-term aspirational goal for aviation of net zero 2050 carbon dioxide (CO2) emissions for international aviation<br/>- publication of the 2040 zero emissions airport target call for evidence<br/>significant progress on sustainable aviation fuels (SAF) including:<br/>- publishing the second SAF mandate consultation<br/>- launching a second round of the Advanced Fuels Fund<br/>- publishing the Philip New report and the government response on how to develop a UK SAF industry<br/>- publication of the government response to the UK ETS consultation setting out a range of commitments that will enhance the effectiveness of the UK Emissions Trading Scheme (ETS) for aviation<br/>- launch of the expressions of interest for 2 DfT- funded research projects into aviation’s non-CO2 impacts<br/>The report also acknowledges that big challenges remain and we need to continue to work across the aviation sector and with experts across the economy to ensure we continue to make progress on our path to decarbonise aviation.
Low Carbon Economic Dispatch of Integrated Energy Systems Considering Utilization of Hydrogen and Oxygen Energy
Mar 2024
Publication
Power-to-gas (P2G) facilities use surplus electricity to convert to natural gas in integrated energy systems (IES) increasing the capacity of wind power to be consumed. However the capacity limitation of P2G and the antipeaking characteristic of wind power make the wind abandonment problem still exist. Meanwhile the oxygen generated by P2G electrolysis is not fully utilized. Therefore this study proposes a low-carbon economic dispatch model considering the utilization of hydrogen and oxygen energy. First the two-stage reaction model of P2G is established and the energy utilization paths of hydrogen blending and oxygen-rich deep peaking are proposed. Specifically hydrogen energy is blended into the gas grid to supply gas-fired units and oxygen assists oxygenrich units into deep peaking. Subsequently the stochastic optimization is used to deal with the uncertainty of the system and the objective function and constraints of the IES are given to establish a low-carbon dispatch model under the energy utilization model. Finally the effectiveness of the proposed method is verified based on the modified IEEE 39-node electric network 20-node gas network and 6-node heat network models.
Performance and Emission Optimisation of an Ammonia/ Hydrogen Fuelled Linear Joule Engine Generator
Mar 2024
Publication
This paper presents a Linear Joule Engine Generator (LJEG) powered by ammonia and hydrogen co-combustion to tackle decarbonisation in the electrification of transport propulsion systems. A dynamic model of the LJEG which integrates mechanics thermodynamics and electromagnetics sub-models as well as detailed combustion chemistry analysis for emissions is presented. The dynamic model is integrated and validated and the LJEG performance is optimised for improved performance and reduced emissions. At optimal conditions the engine could generate 1.96 kWe at a thermal efficiency of 34.3% and an electrical efficiency of 91%. It is found that the electromagnetic force of the linear alternator and heat addition from the external combustor and engine valve timing have the most significant influences on performance whereas the piston stroke has a lesser impact. The impacts of hydrogen ratio oxygen concentration inlet pressure and equivalence ratio of ammonia-air on nitric oxide (NO) formation and reduction are revealed using a detailed chemical kinetic analysis. Results indicated that rich combustion and elevated pressure are beneficial for NO reduction. The rate of production analysis indicates that the equivalence ratio significantly changes the relative contribution among the critical NO formation and reduction reaction pathways.
Carbon-neutral Cement: The Role of Green Hydrogen
Mar 2024
Publication
Business-as-usual (BAU) cement production is associated with a linear model that contributes significantly to global warming and is dependent on volatile energy markets. A novel circular model is proposed by adding three power-to-gas system components to current production systems: a calcium-looping (CaL) CO2 capture unit; water electrolysis for hydrogen and oxygen generation; and a methanation unit for synthetic natural gas (SNG) production. The paper presents the first analysis of the combined industrial-scale operation of these components in a closed loop where the SNG fuels the cement kiln and the CaL unit while the O2 produced feeds it. The circular hybrid and BAU models are compared in three feasibility scenarios. It is concluded that the circular model outperforms the other alternatives environmentally opening a potential pathway for the cement industry to achieve near net-zero CO2 emissions reduce energy dependence and improve economic efficiency.
Optimal Design of a Hydrogen-powered Fuel Cell System for Aircraft Applications
Mar 2024
Publication
Recently hydrogen and fuel cells have gained interest as an emerging technology to mitigate the effects of climate change caused by the aviation sector. The aim of this work is to evaluate the applicability of this technology to an existing regional aircraft in order to assess its electrification with the aim of reducing greenhouse gas emissions and achieving sustainability goals. The design of a proton-exchange membrane fuel cell system (PEMFC) with the inclusion of liquid hydrogen storage is carried out. Specifically a general mathematical model is developed which involves multiple scales ranging from individual cells to aircraft scale. First the fuel cell electrochemical model is developed and validated against published polarization curves. Then different sizing approaches are used to compute the overall weight of the hydrogen-based propulsion system in order to optimize the system and minimize its weight. Crucially this work underscores that the feasibility of hydrogenbased fuel cell systems relies not only on hydrogen storage but especially on the electrochemical cell performance which influences the size of the balance of plant and especially its thermal management section. In particular the strategic significance of working with fuel cells at partial loads is demonstrated. This entails achieving an optimal balance between the stacks oversizing and the weights of both hydrogen storage and balance of plant thereby minimizing the overall weight of the system. It is thus shown that an integrated approach is imperative to guide progress towards efficient and implementable hydrogen technology in regional aviation. Furthermore a high-performance PEMFC is analyzed resulting in an overall weight reduction up to nearly 10% compared to the baseline case study. In this way it is demonstrated as technological advancements in PEMFCs can offer further prospects for improving system efficiency.
A Hydrogen-fuelled Compressed Air Energy Storage System for Flexibility Reinforcement and Variable Renewable Energy Integration in Grids with High Generation Curtailment
Mar 2024
Publication
Globally the increasing share of renewables prominently driven by intermittent sources such as solar and wind power poses significant challenges to the reliability of current electrical infrastructures leading to the adoption of extreme measures such as generation curtailment to preserve grid security. Within this framework it is essential to develop energy storage systems that contribute to reinforce the flexibility and security of power grids while simultaneously reducing the share of generation curtailment. Therefore this study investigates the performance of an integrated photovoltaic-hydrogen fuelled-compressed air energy storage system whose configuration is specifically conceived to enable the connection of additional intermittent sources in already saturated grids. The yearly and seasonal performance of the integrated energy storage system specifically designed to supply flexibility services are evaluated for a scenario represented by a real grid with high-variable renewables penetration and frequent dispatchability issues. Results show that the integrated system with performanceoptimized components and a new energy management strategy minimizes photovoltaic energy curtailment otherwise around 50% to as low as 4% per year achieving system efficiencies of up to 62% and reinforces the grid by supplying inertial power for up to 20% of nighttime hours. In conclusion the integrated plant operating with zero emissions on-site hydrogen production and optimized for non-dispatchable photovoltaic energy utilization proves to be effective in integrating new variable renewable sources and reinforcing saturated grids particularly during spring and summer.
Effects of Fuel Cell Size and Dynamic Limitations on the Durability and Efficiency of Fuel Cell Hybrid Electric Vehicles under Driving Conditions
Mar 2024
Publication
In order to enhance the durability of fuel cell systems in fuel cell hybrid electric vehicles (FCHEVs) researchers have been dedicated to studying the degradation monitoring models of fuel cells under driving conditions. To predict the actual degradation factors and lifespan of fuel cell systems a semi-empirical and semi-physical degradation model suitable for automotive was proposed and developed. This degradation model is based on reference degradation rates obtained from experiments under known conditions which are then adjusted using coefficients based on the electrochemical model. By integrating the degradation model into the vehicle simulation model of FCHEVs the impact of different fuel cell sizes and dynamic limitations on the efficiency and durability of FCHEVs was analyzed. The results indicate that increasing the fuel cell stack power improves durability while reducing hydrogen consumption but this effect plateaus after a certain point. Increasing the dynamic limitations of the fuel cell leads to higher hydrogen consumption but also improves durability. When considering only the rated power of the fuel cell a comparison between 160 kW and 100 kW resulted in a 6% reduction in hydrogen consumption and a 10% increase in durability. However when considering dynamic limitation factors comparing the maximum and minimum limitations of a 160 kW fuel cell hydrogen consumption increased by 10% while durability increased by 83%.
A Power Dispatch Allocation Strategy to Produce Green Hydrogen in a Grid-integrated Offshore Hybrid Energy System
Mar 2024
Publication
A dedicated grid-tied offshore hybrid energy system for hydrogen production is a promising solution to unlock the full benefit of offshore wind and solar energy and realize decarbonization and sustainable energy security targets in electricity and other sectors. Current knowledge of these offshore hybrid systems is limited particularly in the integration component control and allocation aspects. Therefore a grid-integrated analytical model with a power dispatch allocation strategy between the grid and electrolyzer for the co-production of hydrogen from the offshore hybrid energy system is developed in this paper. While producing hydrogen the proposed offshore hybrid energy system supplies a percentage of its capacity to the onshore grid facility and the amount of the electricity is quantified based on the electricity market price and available total offshore generation. The detailed controls of each component are discussed. A case study considers a hypothetical hybrid offshore energy system of 10 MW situated in a potential offshore off the NSW of Australia based on realistic metrological data. A grid-scale proton-exchange membrane electrolyzer stack is used and a model predictive power controller is implemented on the distributed hydrogen generation scheme. The model is helpful for the assessment or optimization of both the economics and feasibility of the dedicated offshore hybrid energy farm for hydrogen production systems.
Investigation of Pre-cooling Strategies for Heavy-duty Hydrogen Refuelling
Mar 2024
Publication
Green hydrogen presents a promising solution for transitioning from fossil fuels to a clean energy future particularly with the application of fuel cell electric vehicles (FCEVs). However the hydrogen refuelling process for FCEVs requires extensive pre-cooling to achieve fast filling times. This study presents experiments and simulations of a hydrogen refuelling station equipped with an adaptable cold-fill unit aiming to maximize fuelling efficiencies. For this purpose we developed and experimentally validated simulation models for a hydrogen tank and an aluminium block heat exchanger. Different pre-cooling parameters affect the final tank temperatures during the parallel filling of three 350 L type IV tanks. The results indicate significant potential for optimizing the required cooling energy with achievable savings of over 50 % depending on the pre-cooling strategy. The optimized pre-cooling strategies and energy savings aid in advancing the refuelling process for FCEVs effectively contributing to the transition to clean energy.
Multi-port Coordination: Unlocking Flexibility and Hydrogen Opportunities in Green Energy Networks
Mar 2024
Publication
Seaports are responsible for consuming a large amount of energy and producing a sizeable amount of environmental emissions. However optimal coordination and cooperation present an opportunity to transform this challenge into an opportunity by enabling flexibility in their generation and load units. This paper introduces a coordination framework for exploiting flexibility across multiple ports. The proposed method fosters cooperation between ports in achieving lower environmental emissions while leveraging flexibility to increase their revenue. This platform allows ports to participate in providing flexibility for the energy grid through the introduction of a green port-to-grid concept while optimising their cooperation. Furthermore the proximity to offshore wind farms is considered an opportunity for the ports to investigate their role in harnessing green hydrogen. The proposed method explores the hydrogen storage capability of ports as an opportunity for increasing the techno-economic benefits particularly through coupling them with offshore wind farms. Compared to existing literature the proposed method enjoys a comprehensive logistics-electric model for the ports a novel coordination framework for multi-port flexibility and the potentials of hydrogen storage for the ports. These unique features position this paper a valuable reference for research and industry by demonstrating realistic cooperation among ports in the energy network. The simulation results confirm the effectiveness of the proposed port flexibility coordination from both environmental and economic perspectives.
Cost and Thermodynamic Analysis of Wind-Hydrogen Production via Multi-energy Systems
Mar 2024
Publication
With rising temperatures extreme weather events and environmental challenges there is a strong push towards decarbonization and an emphasis on renewable energy with wind energy emerging as a key player. The concept of multi-energy systems offers an innovative approach to decarbonization with the potential to produce hydrogen as one of the output streams creating another avenue for clean energy production. Hydrogen has significant potential for decarbonizing multiple sectors across buildings transport and industries. This paper explores the integration of wind energy and hydrogen production particularly in areas where clean energy solutions are crucial such as impoverished villages in Africa. It models three systems: distinct configurations of micro-multi-energy systems that generate electricity space cooling hot water and hydrogen using the thermodynamics and cost approach. System 1 combines a wind turbine a hydrogen-producing electrolyzer and a heat pump for cooling and hot water. System 2 integrates this with a biomass-fired reheat-regenerative power cycle to balance out the intermittency of wind power. System 3 incorporates hydrogen production a solid oxide fuel cell for continuous electricity production an absorption cooling system for refrigeration and a heat exchanger for hot water production. These systems are modeled with Engineering Equation Solver and analyzed based on energy and exergy efficiencies and on economic metrics like levelized cost of electricity (LCOE) cooling (LCOC) refrigeration (LCOR) and hydrogen (LCOH) under steady-state conditions. A sensitivity analysis of various parameters is presented to assess the change in performance. Systems were optimized using a multiobjective method with maximizing exergy efficiency and minimizing total product unit cost used as objective functions. The results show that System 1 achieves 79.78 % energy efficiency and 53.94 % exergy efficiency. System 2 achieves efficiencies of 55.26 % and 27.05 % respectively while System 3 attains 78.73 % and 58.51 % respectively. The levelized costs for micro-multi-energy System 1 are LCOE = 0.04993 $/kWh LCOC = 0.004722 $/kWh and LCOH = 0.03328 $/kWh. For System 2 these values are 0.03653 $/kWh 0.003743 $/kWh and 0.03328 $/kWh. In the case of System 3 they are 0.03736 $/kWh 0.004726 $/kWh and 0.03335 $/kWh and LCOR = 0.03309 $/kWh. The results show that the systems modeled here have competitive performance with existing multi-energy systems powered by other renewables. Integrating these systems will further the sustainable and net zero energy system transition especially in rural communities.
On the Way to Utilizing Green Hydrogen as an Energy Carrier—A Case of Northern Sweden
Mar 2024
Publication
Low or even zero carbon dioxide emissions will be an essential requirement for energy supplies in the near future. Besides transport and electricity generation industry is another large carbon emitter. Hydrogen produced by renewable energy provides a flexible way of utilizing that energy. Hydrogen as an energy carrier could be stored in a large capacity compared to electricity. In Sweden hydrogen will be used to replace coal for steel production. This paper discusses how the need for electricity to produce hydrogen will affect the electricity supply and power flow in the Swedish power grid and whether it will result in increased emissions in other regions. Data of the Swedish system will be used to study the feasibility of implementing the hydrogen system from the power system viewpoint and discuss the electricity price and emission issues caused by the hydrogen production in different scenarios. This paper concludes that the Swedish power grid is feasible for accommodating the additional electricity capacity requirement of producing green hydrogen for the steel industry. The obtained results could be references for decision makers investors and power system operators.
Assessing the Performance of Fuel Cell Electric Vehicles Using Synthetic Hydrogen Fuel
Mar 2024
Publication
The deployment of hydrogen fuel cell electric vehicles (FCEVs) is critical to achieve zero emissions. A key parameter influencing FCEV performance and durability is hydrogen fuel quality. The real impact of contaminants on FCEV performance is not well understood and requires reliable measurements from real-life events (e.g. hydrogen fuel in poor-performing FCEVs) and controlled studies on the impact of synthetic hydrogen fuel on FCEV performance. This paper presents a novel methodology to flow traceable hydrogen synthetic fuel directly into the FCEV tank. Four different synthetic fuels containing N2 (90–200 µmol/mol) CO (0.14–5 µmol/mol) and H2S (4–11 nmol/mol) were supplied to an FCEV and subsequently sampled and analyzed. The synthetic fuels containing known contaminants powered the FCEV and provided real-life performance testing of the fuel cell system. The results showed for the first time that synthetic hydrogen fuel can be used in FCEVs without the requirement of a large infrastructure. In addition this study carried out a traceable H2 contamination impact study with an FCEV. The impact of CO and H2S at ISO 14687:2019 threshold levels on FCEV performance showed that small exceedances of the threshold levels had a significant impact even for short exposures. The methodology proposed can be deployed to evaluate the composition of any hydrogen fuel.
No more items...