Safety
Overview of the DOE Hydrogen Safety, Codes and Standards Program Part 1- Regulations, Codes and Standards (RCS) for Hydrogen Technologies - An Historical Overview
Oct 2015
Publication
RCS for hydrogen technologies were first developed approximately sixty years ago when hydrogen was being sold as an industrial commodity. The advent of new hydrogen technologies such as Fuel Cell Electric Vehicles (FCEVs) created a need for new RCS. These RCS have been developed with extensive support from the US DOE. These new hydrogen technologies are approaching commercial deployment and this process will produce information on RCS field performance that will create more robust RCS.
Experimental Study of Explosion Wave Propagation in Hydrogen-Air Mixtures of Variable Compositions
Sep 2009
Publication
Results are given of experimental study of propagation of explosion waves in hydrogen-air mixtures of different compositions under conditions of cumulation. The investigations are performed in a setup consisting of two parts namely the upper part in the form of a metal cone and the lower part in the form of a rubber envelope hermetically attached to the cone. The upper and lower parts of the experimental setup are separated by a thin rubber film and may be filled with hydrogen-air mixtures of different compositions.
CFD Based Simulation of Hydrogen Release Through Elliptical Orifices
Sep 2013
Publication
Computational Fluid Dynamics (CFD) is applied to investigate the near exit jet behavior of high pressure hydrogen release into quiescent ambient air through different types of orifices. The size and geometry of the release hole can affect the possibility of auto-ignition. Therefore the effect of release geometry on the behavior and development of hydrogen jet issuing from non-axisymmetric (elliptical) and expanding orifices is investigated and compared with their equivalent circular orifices. A three-dimensional in-house code is developed using the MPI library for parallel computing to simulate the flow based on an inviscid approximation. Convection dominates viscous effects in strongly underexpanded supersonic jets in the vicinity of release exit justifying the use of the Euler equations. The transport (advection) equation is applied to calculate the concentration of hydrogen-air mixture. The Abel-Nobel equation of state is used because high pressure hydrogen flow deviates from the ideal gas assumption. This work effort is conducted to fulfill two objectives. First two types of circular and elliptic orifices with the same cross sectional area are simulated and the flow behavior of each case is studied and compared during the initial stage of release. Second the comparative study between expanding circular exit and its fixed counterpart is carried out. This evaluation is conducted for different sizes of nozzle with different aspect ratios.
The Possibility of an Accidental Scenario for Marine Transportation of Fuel Cell Vehicle-Hydrogen Releases from TPRD by Radiant Heat From Lower Deck
Oct 2015
Publication
In case fires break out on the lower deck of a car carrier ship or a ferry the fuel cell vehicles (FCVs) parked on the upper deck may be exposed to radiant heat from the lower deck. Assuming that the thermal pressure relief device (TPRD) of an FCV hydrogen cylinder is activated by the radiant heat without the presence of flames hydrogen gas will be released by TPRD to form combustible air-fuel mixtures in the vicinity. To investigate the possibility of this accident scenario the present study investigated the relationship between radiant heat and TPRD activation time and evaluated the possibility of radiant heat causing hydrogen releases by TPRD activation under the condition of deck temperature reaching the spontaneous ignition level of the tires and other automotive parts. It was found: a) the tires as well as polypropylene and other plastic parts underwent spontaneous ignition before TPRD was activated by radiant heat and b) when finally TPRD was activated the hydrogen releases were rapidly burned by the flames of the tires and plastic parts on fire. Consequently it was concluded that the explosion of air-fuel mixtures assumed in the accident scenario does not occur in the real world.
Data for the Evaluation of Hydrogen Risks Onboard Vehicles: Outcomes from the French Project Drive
Sep 2011
Publication
From 2006 to 2009 INERIS alongside with CEA PSA PEUGEOT CITROËN and IRPHE were involved in a project called DRIVE. Its objective was to provide data on the whole reaction chain leading to a hydrogen hazard onboard a vehicle. Out of the three types of leakage identified by the consortium (permeation chronic and accidental) the chronic leakage taking place within the engine was judged to be more problematic since it can feature a high probability of occurrence and a significant release flow rate (up to 100 NL/min). Ignition tests carried out within a real and dummy engine compartment showed that pressure effects due to an explosion will be relatively modest provided that the averaged hydrogen concentration in this area is limited to 10% vol/vol which would correspond to a maximum release flow of 10 NL/min. This maximum concentration could be used as a threshold value for detection or as a target while designing the vehicle. Jet fire experiments were also conducted in the frame of the DRIVE project. It was found that pressure-relief devices (PRDs) might be unsuited to protect humans from the explosion of a tank caused by a bonfire. Other solutions are proposed in this paper.
Accidental Hydrogen Release in Gc-laboratory: A Case Study
Oct 2015
Publication
A 50-litre standard hydrogen gas cylinder was temporarily placed in a laboratory to supply hydrogen gas to a flame ionization detector (FID) for use in gas chromatography (GC). On 20 January 2015 the safety relief valve on the pressure regulator failed and released about 0.34 kg of hydrogen into the laboratory. The gas cloud did not ignite so there was no injury or damage. The results of a full investigation with a complete course of action and reconstruction are presented that verify the cause of the leakage and estimate the gas concentration of the dispersion and gas cloud. A preliminary simulation of the likely explosion is provided. If the gas cloud had ignited the explosion would most likely have caused significant structural damage to doors windows and possibly the walls.
Ignition Experiments of Hydrogen Mixtures by Different Methods and Description of the DRDC Test Facilities
Sep 2009
Publication
The paper will present results of hydrogen/oxygen mixtures ignited by using electric sparks electrostatic discharges a heating element and a flame. Measurements of the lower flammability limit (LFL) was done for each ignition method. The hydrogen mixtures of different concentrations were ignited at the bottom of a combustion chamber leading to an upward propagation of the resulting flame. At some level of concentration the combustion was partial due to the limited upward propagation. The complete combustion of the whole mixture was observed at concentration limits higher than the known LFL of 4% vol. for hydrogen in air. The paper will describe the test facilities and the resulting ignition probabilities for different ignition methods.
Syngas Explosion Reactivity in Steam Methane Reforming Process
Sep 2013
Publication
During the synthesis of hydrogen by methane steam reforming mixtures composed of H2 CH4 CO and CO2 are produced in the process. In this work the explosion reactivity of these mixtures on the basis of detonation cell size and laminar flame speed is calculated using a reactant assimilation simplification and a kinetic approach. The detonation cells width are calculated using the Cell_CH Kurchatov institute method and the laminar flame velocities are calculated with Chemkin Premix using different detailed chemical kinetic mechanisms. These calculations are used to define if these mixtures could be considered having a medium or a high reactivity for risk assessment in case of leak in the hydrogen plants.
Hydrogen Storage – Industrial Prospectives
Sep 2011
Publication
The topic of this paper is to give an historical and technical overview of hydrogen storage vessels and to detail the specific issues and constraints of hydrogen energy uses. Hydrogen as an industrial gas is stored either as a compressed or as a refrigerated liquefied gas. Since the beginning of the last century hydrogen is stored in seamless steel cylinders. At the end of the 60 s tubes also made of seamless steels were used; specific attention was paid to hydrogen embrittlement in the 70 s. Aluminum cylinders were also used for hydrogen storage since the end of the 60 s but their cost was higher compared to steel cylinders and smaller water capacity. To further increase the service pressure of hydrogen tanks or to slightly decrease the weight metallic cylinders can be hoop-wrapped. Then with specific developments for space or military applications fully-wrapped tanks started to be developed in the 80 s. Because of their low weight they started to be used in for portable applications: for vehicles (on-board storages of natural gas) for leisure applications (paint-ball) etc… These fully-wrapped composite tanks named types III and IV are now developed for hydrogen energy storage; the requested pressure is very high (from 700 to 850 bar) leads to specific issues which are discussed. Each technology is described in term of materials manufacturing technologies and approval tests. The specific issues due to very high pressure are depicted. Hydrogen can also be stored in liquid form (refrigerated liquefied gases). The first cryogenic vessels were used in the 60s. In the following the main characteristics of this type of storage will be indicated.
Hypothetical Accident Scenario Modelling for Condensed Hydrogen Storage Materials
Sep 2011
Publication
Hydrogen is seen as an ideal energy carrier for stationary and mobile applications. However the use of high energy density condensed hydrogen storage materials such as NH3BH3 comes with risks associated with their high reactivity with water exposure and their decomposition products reactivity in air. To predict their behaviour under these circumstances idealized finite element models of hypothetical accident scenarios have been developed. Empirical thermodynamic calculations based on precise thermal gravimetric analysis (TGA) and calorimetric experiments have been performed in order to quantify the energy and hydrogen release rates and to quantify the reaction products resulting from water and air exposure.
Numerical Modelling of Hazards of Hydrogen Storage
Sep 2017
Publication
For the general public to use hydrogen as a vehicle fuel they must be able to handle hydrogen with the same degree of confidence as conventional liquid and gaseous fuels. The hazards associated with jet releases from accidental leaks in a vehicle-refuelling environment must be considered if hydrogen is stored and used as a high-pressure gas since a jet release can result in a fire or explosion. This paper describes the work done by us in modelling some of the consequences of accidental releases of hydrogen implemented in our Fire Explosion Release Dispersion (FRED) software. The new dispersion model is validated against experimental data available in the open literature. The model predictions of hydrogen gas concentration as a function of distance are in good agreement with experiments. In addition FRED has been used to model the consequence of the bursting of a vessel containing compressed hydrogen. The results obtained from FRED i.e. overpressure as a function of distance match well in comparison to experiments. Overall it is concluded that FRED can model the consequences of an accidental release of hydrogen and the blast waves generated from bursting of vessel containing compressed hydrogen
Development of a Hydrogen and Fuel Cell Vehicle Emergency Response National Template
Sep 2013
Publication
The California Fuel Cell Partnership (CaFCP) is currently working with key stakeholders like the US Department of Energy (DOE) and National Fire Protection Association (NFPA) to develop a national template for educating and training first responders about hydrogen fuel cell-powered vehicles (FCV) and hydrogen fuelling infrastructure. Currently there are several existing programs that either have some related FCV/hydrogen material or have plans to incorporate this in the future. To create a robust national emergency responder (ER) program the strongest elements from these existing programs are considered for incorporation into the template. Working with the key stakeholders the national template will be evaluated on a regular basis to ensure accurate and up to date information and resources and effective teaching techniques for the emergency response community. This paper describes the evaluation process discusses elements of the template and reports on the steps and progress to implementation; all in the effort to effectively support the emergency response community as hydrogen infrastructure develops and FCVs are leased or sold.
Validation of CFD Models for Hydrogen Fast Filling Simulations
Sep 2011
Publication
High injection pressures are used during the re-fuelling process of vehicle tanks with compressed hydrogen and consequently high temperatures are generated in the tank potentially jeopardizing the system safety. Computational Fluid Dynamics (CFD) tools can help in predicting the temperature rise within vehicle tanks providing complete and detailed 3D information on flow features and temperature distribution. In this framework CFD simulations of hydrogen fast filling at different working conditions are performed and the accuracy of the numerical models is assessed against experimental data for a type 4 tank up to 70 MPa. Sensitivity analyses on the main modelling parameters are carried out in compliance with general CFD Best Practice Guidelines.
Discussion of Lessons Learned from a Hydrogen Release
Sep 2013
Publication
Just in line with any emerging alternative transportation fuel incidents involving hydrogen used as transportation fuel are learning opportunities for this new and growing industry. This paper includes discussion of many topics in hydrogen safety surrounding the installation operation and maintenance of commercial hydrogen stations or compression storage and dispensing systems.
Ignited Releases of Liquid Hydrogen: Safety Considerations of Thermal and Overpressure Effects
Sep 2013
Publication
If the ‘Hydrogen Economy’ is to progress more hydrogen fuelling stations are required. In the short term and in the absence of a hydrogen distribution network these fuelling stations will have to be supplied by liquid hydrogen (LH2) road tankers. Such a development will increase the number of tanker offloading operations significantly and these may need to be performed in close proximity to the general public. LH2 was first investigated experimentally as large-scale spills of LH2 at a rate of 60 litres per minute. Measurements were made on un-ignited releases which included the concentration of hydrogen in air thermal gradients in the concrete substrate liquid pool formation and temperatures within the pool. Computational modelling on the un-ignited spills was also performed. The experimental work on ignited releases of LH2 detailed in this paper is a continuation of the work performed by Royle and Willoughby. The experimental findings presented are split into three phenomena; jet-fires in high and low wind conditions ‘burn-back’ of ignited clouds and secondary explosions post ‘burn-back’. The aim of this work was to determine the hazards and severity of a realistic ignited spill of LH2 focussing on; flammability limits of an LH2 vapour cloud flame speeds through an LH2 vapour cloud and subsequent radiative heat levels after ignition. An attempt was made to estimate the magnitude of an explosion that occurred during one of the releases. The results of these experiments will inform the wider hydrogen community and contribute to the development of more robust modelling tools. The resulting data were used to propose safety distances for LH2 offloading facilities which will help to update and develop guidance for codes and standards.
Experimental Determination of Minimum Ignition Current (MIC) for Hydrogen & Methane Mixtures for the Determination of the Explosion Group Corresponding to IEC 60079-20-1
Sep 2017
Publication
Power to gas could get an important issue in future permitting the valorisation of green electric excess energy by producing hydrogen mixing it with natural gas (NG) and use the NG grid as temporary storage. NG grid stakeholders expect that blends up to 20% seem to be a realistic scenario. The knowledge of the explosion group for these hydrogen/NG (H2NG) mixtures is a necessary information for the choice of equipment and protective systems intended for the use in potentially explosive atmospheres of these mixtures. Therefore we determined experimentally the minimum ignition current (MIC) the MIC ratios referenced on MIC of pure methane corresponding to IEC 60079-20-1 standard. The results are compared to those obtained by maximum experimental safe gap (MESG) the second standardized method. The tested gas mixtures started from 2 vol.% volume admixture in methane rising in 2% steps up to 20 vol.% of hydrogen. The interpretation of these results could conduct to consider methane/hydrogen mixtures containing more than 14 vol.% of hydrogen as Group IIB gases.
Interaction of Hydrogen Jets with Hot Surfaces
Sep 2017
Publication
The formation of hydrogen jets from pressurized sources and its ignition when hitting hot devices has been studied by many projects. The transient jets evolve with high turbulence depending on the configuration of the nozzle and especially the pressure in the hydrogen reservoir. In addition the length of the jets and the flames generated by ignition at a hot surface varies. Parameters to be varied were initial pressure of the source (2.5 10 20 and 40 MPa) distance between the nozzle and the hot surface (3 5 and 7 m) and temperature of the hot surface (between 400 and 1000 K). The interaction of the hydrogen jets is visualized by high-speed cinematography techniques which allow analysing the jet characteristics. By combination of various methods of image processing the visibility of the phenomena on the videos taken at 15 000 fps was improved. In addition high-speed NIR spectroscopy was used to obtain temperature profiles of the expanding deflagrations. The jets ignite already above 450 K for conditions mainly from the tubular source at 40 MPa. In addition the propagation of the flame front depends on all three varied parameters: temperature of the hot surface pressure in the reservoir and distance between nozzle and hot surface. In most cases also upstream propagation occurs. A high turbulence seems to lead to the strong deflagrations. At high temperatures of the ignition sources the interaction leads to fast deflagration and speeds up- and downstream of the jet. The deflagration velocity is close to velocity of sound and emission of pressure waves occurs.
Applying Risk Management Strategies Prudently
Sep 2011
Publication
During the current global financial crisis the term “Risk Management” is often heard. Just as the causes for the financial problems are elusive so is a complete definition of what Risk Management means. The answer is highly dependent upon your perceptions of “risk” and your appetite for assuming risks. The proposed paper will explore these issues with some brief case studies as they apply to hydrogen industrial applications hydrogen refuelling stations and fuel cell technologies for distributed generation.
Specifically the paper will identify the various risk exposures from the perspective of the project developers original equipment suppliers end users project funding sources and traditional insurance providers. What makes this evaluation intriguing is that it is a mixed bag of output capacities Combine Heat & Power (CHP) potential and technology maturity. Therefore the application considerations must be part of any overall Risk Management program.
Specifically the paper will identify the various risk exposures from the perspective of the project developers original equipment suppliers end users project funding sources and traditional insurance providers. What makes this evaluation intriguing is that it is a mixed bag of output capacities Combine Heat & Power (CHP) potential and technology maturity. Therefore the application considerations must be part of any overall Risk Management program.
Ignition and Heat Radiation of Cryogenic Hydrogen Jets
Sep 2011
Publication
In the present work release and ignition experiments with horizontal cryogenic hydrogen jets at temperatures of 35–65 K and pressures from 0.7 to 3.5 MPa were performed in the ICESAFE facility at KIT. This facility is specially designed for experiments under steady-state sonic release conditions with constant temperature and pressure in the hydrogen reservoir. In distribution experiments the temperature velocity turbulence and concentration distribution of hydrogen with different circular nozzle diameters and reservoir conditions was investigated for releases into stagnant ambient air. Subsequent combustion experiments of hydrogen jets included investigations on the stability of the flame and its propagation behaviour as function of the ignition position. Furthermore combustion pressures and heat radiation from the sonic jet flame during the combustion process were measured. Safety distances were evaluated and an extrapolation model to other jet conditions was proposed. The results of this work provide novel data on cryogenic sonic hydrogen jets and give information on the hazard potential arising from leaks in liquid hydrogen reservoirs.
Modelling and Simulation of Lean Hydrogen-air Deflagrations
Sep 2013
Publication
The paper describes CFD modelling of lean hydrogen mixture deflagrations. Large eddy simulation (LES) premixed combustion model developed at the University of Ulster to account phenomena related to large-scale deflagrations was adjusted specifically for lean hydrogen-air flames. Experiments by Kumar (2006) on lean hydrogen-air mixture deflagrations in a 120 m3 vessel at initially quiescent conditions were simulated. 10% by volume hydrogen-air mixture was chosen for simulation to provide stable downward flame propagation; experiments with the smallest vent area 0.55 m2 were used as having the least apparent flame instabilities affecting the pressure dynamics. Deflagrations with igniter located centrally near vent and at far from the vent wall were simulated. Analysis of simulation results and experimental pressure dynamics demonstrated that flame instabilities developing after vent opening made the significant contribution to maximum overpressure in the considered experiments. Potential causes of flame instabilities are discussed and their comparative role for different igniter locations is demonstrated.
Regulations and Research on RC&S for Hydrogen Storage Relevant To Transport and Vehicle Issues with Special Focus on Composite Containments
Sep 2011
Publication
Developers interested in high pressure storage of hydrogen for mobile use increasingly rely on composite cylinders for onboard storage or transport of dangerous goods. Thus composite materials and systems deserve special consideration. History gives interesting background information important to the understanding of the current situation as to regulations codes and standards.<br/>Based on this review origins of different regulations for the storage of hydrogen as dangerous good and as propellant for vehicles will be examined. Both categories started out using steel and sometimes aluminium as cylinder material. With composite materials becoming more common a new problem emerged: vital input for regulations on composite pressure systems was initially derived from decades of experience with steel cylinders. As a result both regulatory fields suffer somewhat from this common basis. Only recent developments regarding requirements for composite cylinders have begun to go more and more separate ways. Thus these differences lead to some shortcomings in regulation with respect to composite storage systems.<br/>In principle in spite of separate development these deficits are in both applications very much the same: there are uncertainties in the prediction of safe service life in retesting procedures of composite cylinders and in their intervals. Hence different aspects of uncertainties and relevant approaches to solutions will be explained.
Experimental Investigation on Helium Jet Release and Distribution in a Vented Cylindrical Enclosure – Effect of Wall Temperature Conditions
Oct 2015
Publication
Hydrogen generated during core meltdown accidents in nuclear reactors can cause serious threat to the structural integrity of the containment and safe operation of nuclear power plants. The study of hydrogen release and mixing within the containments is an important area of safety research as hydrogen released during such accidents in nuclear power plants can lead to hydrogen explosions and catastrophic consequences. A small scale experimental setup called the AERB-IIT Madras Hydrogen Mixing Studies (AIHMS) facility is setup at IIT Madras to study the distribution of hydrogen subsequent to release as a jet followed by its response to various wall thermal conditions. The present paper gives details of the design fabrication and instrumentation of the AIHMS facility and a comparison of features of the facility with respect to other facilities existing for hydrogen mitigation studies. Then it gives details of the experiments conducted and the results of the preliminary experiments on concentration build-up as a result of injection of gases (air and helium) and effect of thermally induced natural convection on gas mixing performed in this experimental facility.
Hydrogen Detection- Visualisation of Hydrogen Using Non Invasive Optical Schlieren Technique BOS
Sep 2005
Publication
The detection of hydrogen after its accidental release is not only important for research purposes but will be much more important under safety aspects for future applications when hydrogen should be a standard energy resource. At Fraunhofer ICT two principally different approaches were made: first the new optical background-oriented schlieren method (BOS) is used for the visualization of hydrogen distribution and mixing processes at a rate of up to 1000 frames per second. The results from experiments with small scale injection of hydrogen/air–mixtures into air flows and free jets of hydrogen and hydrogen/air–mixtures emerging from 1” hoses simulating exhaust pipes will be discussed and interpreted with support from selected high speed videos. Finally mixing zones and safety distances can be determined by this powerful method.
Numerical Investigation on the Self-ignition Behavior of High Pressure Hydrogen Released from the Tube
Sep 2017
Publication
This paper shows the numerical investigation on the self-ignition behavior of high pressure hydrogen released from the tube. The present study aims to clarify the effect of parameters on the behavior and duration of self-ignition outside the tube using two-dimensional axisymmetric numerical simulation with detailed chemistry. The parameters in this study are release pressure tube diameter and tube length. The strength of the spherical shock wave to keep chemical reaction and expansion are important factors for self ignited hydrogen jet to be sustained outside the tube. The trend of strength of spherical shock wave is enhanced by higher release pressure and larger tube diameter. The chemical reaction weakens due to expansion and the degree of expansion becomes larger as the spherical shock wave propagates. The characteristic time for the chemical reaction becomes shorter in higher release pressure larger tube diameter and longer tube diameter cases from the induction time under constant volume assumption. The self ignited hydrogen jet released from the tube is sustained up to the distance where the characteristic time for chemical reaction is shorter than the characteristic time for the flow to expand and higher release pressure larger tube diameter and longer tube length expand the distance where the tip flame can propagate downstream. For the seed flame which is the key for jet fire the larger amount of the ignited volume when the shock wave reaches the tube exit contributes to the formation and stability of the seed flame. The amount of the ignited volume tends to be larger in the longer tube length higher release pressure and larger tube diameter cases.
Design of Catalytic Recombiners for Safe Removal of Hydrogen from Flammable Gas Mixtures
Sep 2007
Publication
Several today’s and future applications in energy technology bear the risk of the formation of flammable hydrogen/air mixtures either due to the direct use of hydrogen or due to hydrogen appearing as a by-product. If there’s the possibility of hydrogen being released accidentally into closed areas countermeasures have to be implemented in order to mitigate the threat of an explosion. In the field of nuclear safety passive auto-catalytic recombiners (PAR) are well-known devices for reducing the risk of a hydrogen detonation in a nuclear power plant in the course of a severe accident. Hydrogen and oxygen react on catalyst materials like platinum or palladium already far below conventional flammability limits. The most important concern with regard to the utilization of hydrogen recombiners is the adequate removal of the reaction heat. Already low hydrogen concentrations may increase the system temperature beyond the self-ignition limit of hydrogen/air mixtures and may lead to an unintended ignition on hot parts of the PAR.<br/>Starting from the nuclear application since several years IEF-6 and LRST perform joint research in the field of passive auto-catalytic recombiners including experimental studies modelling and development of new design concepts. Recently approaches on specifically designed catalysts and on passive cooling devices have been successfully tested. In a design study both approaches are combined in order to provide means for efficient and safe removal of hydrogen. The paper summarizes results achieved so far and possible designs for future applications.
Introduction to Hydrogen Safety Engineering
Sep 2011
Publication
The viability and public acceptance of the hydrogen and fuel cell (HFC) systems and infrastructure depends on their robust safety engineering design education and training of the workforce regulators and other stakeholders in the state-of-the-art in the field. This can be provided only through building up and maturity of the hydrogen safety engineering (HSE) profession. HSE is defined as an application of scientific and engineering principles to the protection of life property and environment from adverse effects of incidents/accidents involving hydrogen. This paper describes a design framework and overviews a structure and contents of technical sub-systems for carrying out HSE. The approach is similar to British standard BS7974 for application of fire safety engineering to the design of buildings and expanded to reflect on specific for hydrogen safety related phenomena including but not limited to high pressure under-expanded leaks and dispersion spontaneous ignition of sudden hydrogen releases to air deflagrations and detonations etc. The HSE process includes three main steps. Firstly a qualitative design review is undertaken by a team that can incorporate owner hydrogen safety engineer architect representatives of authorities having jurisdiction e.g. fire services and other stakeholders. The team defines accident scenarios suggests trial safety designs and formulates acceptance criteria. Secondly a quantitative safety analysis of selected scenarios and trial designs is carried out by qualified hydrogen safety engineer(s) using the state-of-the-art knowledge in hydrogen safety science and engineering and validated models and tools. Finally the performance of a HFC system and/or infrastructure under the trial safety designs is assessed against predefined by the team acceptance criteria. This performance-based methodology offers the flexibility to assess trial safety designs using separately or simultaneously three approaches: deterministic comparative or combined probabilistic/deterministic.
Advancing the Hydrogen Safety Knowledge Base
Sep 2013
Publication
The International Energy Agency's Hydrogen Implementing Agreement (IEA HIA) was established in 1977 to pursue collaborative hydrogen research and development and information exchange among its member countries. Information and knowledge dissemination is a key aspect of the work within IEA HIA tasks and case studies technical reports and presentations/publications often result from the collaborative efforts. The work conducted in hydrogen safety under Task 31 and its predecessor Task 19 can positively impact the objectives of national programs even in cases for which a specific task report is not published. The interactions within Task 31 illustrate how technology information and knowledge exchange among participating hydrogen safety experts serve the objectives intended by the IEA HIA.
RBD-fast Based Sensitivity and Uncertainty Analysis on a Computational Hydrogen Recombiner Test Case
Sep 2017
Publication
Deflagration-to-Detonation Transition Ratio (DDTR) is an important parameter in measuring the hazard of hydrogen detonation at given thermodynamic conditions. It’s among the major tasks to evaluate DDTR in the study of hydrogen safety in a nuclear containment. With CFD tools detailed distribution of thermodynamic parameters at each instant can be simulated with considerable reliability. Then DDTR can be estimated using related CFD output. Forstochastic or epistemic reasons uncertainty always exists in input parameters during computations. This lack of accuracy can finally be reflected in the uncertainty of computation results e.g. DDTR in our consideration. The analysis of the influence of the input uncertainty is therefore a key step to understand the model’s response on the output and possibly to improve the accuracy. The increase of computational power makes it possible to perform statistics-based sensitivity and uncertainty (SU) analysis on CFD simulations. This paper aims at presenting some ideas on the procedure in safety analysis on hydrogen in nuclear containment. A hydrogen recombiner case is constructed and simulated with CFD method. DDTR at each instant is computed using a semi-empirical method. RBD-FAST based SU analysis is performed on the result.
Structural Health Monitoring Techniques for Damages Detection in Hydrogen Pressure Vessels
Sep 2013
Publication
Damages due to mechanical impacts on the structural integrity of pressure vessels in composite material to store compressed hydrogen can lead to disastrous failures if they are not detected and fixed on time. A wide variety of damage modes in composites such as delamination and fiber breakage introduced by impact is difficult to be detected by conventional methods. Structural Health Monitoring (SHM) provides a system with the ability to detect and interpret adverse changes in a structure like a pressure vessel. Different types of methods will be proposed for damage detection based on comparing signals to baseline recorded from the undamaged structure. Guided wave based diagnosis method is one of the most effective used techniques due to its sensitivity to small defects. The paper pretend to identify the more adequate inspection methods to classify by smart rules based in artificial intelligence the effect of an impact on the structural integrity of the pressure vessel thus improving the level of safety.
Fundamental Combustion Properties of Oxygen Enriched Hydrogen-air Mixtures Relevant to Safety Analysis Experimental and Simulation Study
Oct 2015
Publication
In order to face the coming shortage of fossil energies a number of alternative methods of energy production are being considered. One promising approach consists in using hydrogen in replacement of the conventional fossil fuels or as an additive to these fuels. In addition to conventional hydro-electric and fission-based nuclear plants electric energy could be obtained in the future using nuclear fusion as investigated within the framework of the ITER project International Thermonuclear Experimental Reactor. However the operation of ITER may rise safety problems including the formation of a flammable dust/hydrogen/air atmosphere. A first step towards the accurate assessment of accidental explosion in ITER consists in better characterizing the risk of explosion in gaseous hydrogen-containing mixtures. In the present study laminar burning speeds ignition delay-times behind reflected shock wave and detonation cell sizes were measured over wide ranges of composition and equivalence ratios. The performances of five detailed reaction models were evaluated with respect to the present data.
Effects of Oxidants on Hydrogen Spontaneous Ignition: Experiments and Modelling
Sep 2017
Publication
Experiments were performed on the influence of oxidants (air pure oxygen O2 and pure nitrous oxide N2O at atmospheric pressure) in the straight expansion tube after the burst disk on the hydrogen spontaneous ignition. The lowest pressure at which the spontaneous ignition is observed has been researched for a 4 mm diameter tube with a length of 10 cm for the two oxidant gases. The ignition phenomenon is observed with a high speed camera and the external overpressures are measured. Numerical simulations have also been conducted with the high resolution CFD approach detailed chemistry formerly developed by Wen and co-workers. Comparison is made between the predictions and the experimental data.
Experimental Study of the Concentration Build-Up Regimes in an Enclosure Without Ventilation
Sep 2011
Publication
We present an experimental investigation of the different concentration build-up regimes encountered during a release of helium/air mixture in an empty enclosure without ventilation. The release is a vertical jet issuing from a nozzle located near the floor. The nozzle diameter the flow rate and the composition of the injected mixture have been varied such that the injection Richardson number ranges from 6 × 10−6 to 190. The volume Richardson number which gives the ability of the release to mix the enclosure content ranges from 2 × 10−3 to 2 × 104. This wide range allowed reaching three distinct regimes: stratified stratified with a homogeneous upper layer and homogenous.
The Hydrogen Safety Program of the US Department of Energy
Sep 2005
Publication
Demonstrated safety in the production distribution and use of hydrogen will be critical to successful implementation of a hydrogen infrastructure. Recognizing the importance of this issue the U.S. Department of Energy has established the Hydrogen Safety Program to ensure safe operations of its hydrogen research and development program as well as to identify and address needs for new knowledge and technologies in the future hydrogen economy. Activities in the Safety Program range across the entire safety spectrum including: R&D devoted to investigation of hydrogen behaviour physical characteristics materials compatibility and risk analysis; inspection and investigation into the safety procedures and practices of all hydrogen projects supported by DOE funds; development of critical technologies for safe hydrogen systems such as sensors and design techniques; and safety training and education for emergency responders code inspectors and the general public. Throughout its activities the Safety Program encourages the open sharing of information to enable widespread benefit from any lessons learned or new information developed.
This paper provides detailed descriptions of the various activities of the DOE Hydrogen Safety Program and includes some example impacts already achieved from its implementation.
This paper provides detailed descriptions of the various activities of the DOE Hydrogen Safety Program and includes some example impacts already achieved from its implementation.
Safety of Hydrogen and Natural Gas Mixtures by Pipelines- ANR French Project Hydromel
Sep 2011
Publication
In order to gain a better understanding of hazards linked with Hydrogen/Natural gas mixtures transport by pipeline the National Institute of Industrial Environment and Risks (INERIS) alongside with the Atomic Energy Commission (CEA) the industrial companies Air Liquide and GDF SUEZ and the French Research Institutes ICARE and PPRIME (CNRS) have been involved in a project called HYDROMEL. This project was partially funded by the French National Research Agency (ANR) in the framework of its PAN-H program aimed at promoting the R&D activities related to the hydrogen deployment. Firstly the project partners investigated how a NG/H2 mixture may influence the modelling of a hazard scenario i.e. how the addition of a quantity of hydrogen in natural gas can increase the potential of danger. Therefore it was necessary to build an experimental database of physics properties for mixtures. Secondly effect distances in accidental scenarios that could happen on pipelines have been calculated with existing models adapted to the mixtures. This part was preceded by a benchmark exercise between all partners models and experimental results found in the literature. Finally the consortium wrote a good practice guideline for modelling the effects related to the release of natural gas /hydrogen mixture?. The selected models and their comparison with data collected in the literature as well as the experimental results of this project and the main conclusions of the guidelines are presented in this paper.
Influence of Initial Pressure in Hydrogen/Air flame Acceleration During Severe Accident in Nuclear Power Plant
Sep 2017
Publication
Flame acceleration (FA) and explosion of hydrogen/air mixtures remain key issues for severe accident management in nuclear power plants. Empirical criteria were developed in the early 2000s by Dorofeev and colleagues providing effective tools to discern possible FA or DDT (Deflagration-to-Detonation Transition) scenarios. A large experimental database composed mainly of middle-scale experiments in obstacle-laden ducts at atmospheric pressure condition has been used to validate these criteria. However during a severe accident the high release rate of steam and non-condensable gases into the containment can result in pressure increase up to 5 bar abs. In the present work the influence of the unburnt gas initial pressure on flame propagation mechanisms was experimentally investigated. Premixed hydrogen/air mixtures with hydrogen concentration close to 11% and 15% were considered. From the literature we know that these flames are supposed to accelerate up to Chapman-Jouguet deflagration velocity in long obstacle-laden tubes at initial atmospheric conditions. Varying the pressure in the fresh gas in the range 0.6–4 bar no effects on the flame acceleration phase were observed. However as the initial pressure was increased we observed a decrease in the flame velocity close to the end of the tube. The pressure increase due to the combustion reaction was found to be proportional to the initial pressure according to adiabatic isochoric complete combustion.
Estimation of Final Hydrogen Temperature From Refueling Parameters
Oct 2015
Publication
Compressed hydrogen storage is currently widely used in fuel cell vehicles due to its simplicity in tank structure and refuelling process. For safety reason the final gas temperature in the hydrogen tank during vehicle refuelling must be maintained under a certain limit e.g. 85 °C. Many experiments have been performed to find the relations between the final gas temperature in the hydrogen tank and refueling conditions. The analytical solution of the hydrogen temperature in the tank can be obtained from the simplified thermodynamic model of a compressed hydrogen storage tank and it serves as function formula to fit experimental temperatures. From the analytical solution the final hydrogen temperature can be expressed as a weighted average form of initial temperature inflow temperature and ambient temperature inspired by the rule of mixtures. The weighted factors are related to other refuelling parameters such as initial mass initial pressure refuelling time refuelling mass rate average pressure ramp rate (APRR) final mass final pressure etc. The function formula coming from the analytical solution of the thermodynamic model is more meaningful physically and more efficient mathematically in fitting experimental temperatures. The simple uniform formula inspired by the concept of the rule of mixture and its weighted factors obtained from the analytical solution of lumped parameter thermodynamics model is representatively used to fit the experimental and simulated results in publication. Estimation of final hydrogen temperature from refuelling parameters based on the rule of mixtures is simple and practical for controlling the maximum temperature and for ensuring hydrogen safety during fast filling process.
Effect of Plastic Deformation at Room Temperature on Hydrogen Diffusion of Hot-rolled S30408
Sep 2017
Publication
The influence of plastic deformation on hydrogen diffusion is of critical significance for hydrogen embrittlement (HE) studies. In this work thermal desorption spectroscope (TDS) slow strain rate test (SSRT) feritscope transmission electron microscope (TEM) and TDS model are used to establish the relationship between plastic deformation and hydrogen diffusion aiming at unambiguously elucidating the effect of pre-existing traps on hydrogen diffusion of hot-rolled S30408. An effective way is developed to deduce hydrogen apparent diffusivity in this paper. Results indicate apparent diffusivities decrease firstly and then increase with increasing plastic strain at room temperature. Hydrogen diffusion changing with plastic deformation is a complicated process involving multiple factors. It is suggested to be divided into two processes controlled by dislocations and strain-induced martensite respectively and the transformation strain is about 20% demonstrated by experiments.
Hydrogen Safety Training for Laboratory Researchers and Technical Personnel
Sep 2011
Publication
We have developed a web-based hydrogen safety class and are developing a hands-on hydrogen safety class. The 4-h web-based class is directed to laboratory researchers who need basic hydrogen safety information (free online access at http://www.h2labsafety.org/) and it addresses hydrogen fundamentals: properties pressure and cryogenic safety emergency response and codes and standards. Technical operators in charge of building and testing experimental hydrogen equipment will also soon benefit from a more comprehensive 3-day hands-on safety class that will present detailed information for installation testing and operation of hydrogen pressurized systems. The hands-on class includes a full day of classroom instruction followed by two days of laboratory work where students assemble test and operate a pressure system based on a schematic and component description.
Experimental Study of Ignited Unsteady Hydrogen Releases from a High Pressure Reservoir
Sep 2011
Publication
In order to simulate an accidental hydrogen release from the high pressure pipe system of a hydrogen facility a systematic study on the nature of transient hydrogen jets into air and their combustion behavior was performed at the KIT hydrogen test site HYKA. Horizontal unsteady hydrogen jets from a reservoir of 0.37 dm3 with initial pressures of up to 200 bar have been investigated. The hydrogen jets released via round nozzles 3 4 and 10 mm were ignited with different ignition times and positions. The experiments provide new experimental data on pressure loads and heat releases resulting from the deflagration of hydrogen–air clouds formed by unsteady turbulent hydrogen jets released into a free environment. It is shown that the maximum pressure loads occur for ignition in a narrow position and time window. The possible hazard potential arising from an ignited free transient hydrogen jet is described.
Risk Mitigation Strategies for Hydrogen Storage Materials
Sep 2011
Publication
Hydrogen is seen as an ideal energy carrier for stationary and mobile applications. However the use of high energy density materials such as hydrides comes with the drawback of risks associated to their high reactivity towards air and water exposure. We have developed novel strategies to mitigate these risks. These strategies were evaluated using standard UN tests and isothermal calorimetric measurements. Cycling experiments were conducted to assess the impact of the mitigants on the modified materials derived from 8LiH•3Mg(NH2)2 system. In some cases our results show an improvement in kinetics when compared to the unmodified material. Effective mitigants were also discovered for aluminium hydride (alane) and lithium borohydride completely inhibiting ignition.
Estimation of Uncertainty in Risk Assessment of Hydrogen Applications
Sep 2011
Publication
Hydrogen technologies such as hydrogen fuelled vehicles and refuelling stations are being tested in practice in a number of projects (e.g. HyFleet-Cute and Whistler project) giving valuable information on the reliability and maintenance requirements. In order to establish refuelling stations the permitting authorities request qualitative and quantitative risk assessments to show the safety and acceptability in terms of failure frequencies and respective consequences. For new technologies not all statistical data can be established or are available in good quality causing assumptions and extrapolations to be made. Therefore the risk assessment results contain varying degrees of uncertainty as some components are well established while others are not. The paper describes a methodology to evaluate the degree of uncertainty in data for hydrogen applications based on the bias concept of the total probability and the NUSAP concept to quantify uncertainties of new not fully qualified hydrogen technologies and implications to risk management.
Development of Standards for Evaluating Materials Compatibility with High-pressure Gaseous Hydrogen
Sep 2013
Publication
The Hydrogen Safety Codes and Standards program element of the US Department of Energy's Fuel Cell Technologies Office provides coordination and technical data for the development of domestic and international codes and standards related to hydrogen technologies. The materials compatibility program task at Sandia National Laboratories (Livermore CA) is focused on developing the technical basis for qualifying materials for hydrogen service i.e. accommodating hydrogen embrittlement. This presentation summarizes code development activities for qualifying materials for hydrogen service with emphasis on the scientific basis for the testing methodologies including fracture mechanics based measurements (fracture threshold and fatigue crack growth) total fatigue life measurements and full- scale pressure vessel testing.
New China National Standard on Safety of Hydrogen Systems- Keys for Understanding and Use
Sep 2011
Publication
Development of regulations codes and standards on hydrogen safety is a primary ingredient in overcoming barriers to widespread use of hydrogen energy. Key points of the new China National Standard Essential safety requirements for hydrogen systems metal hydrogen compatibility and risk control of flammability and explosion are discussed. Features of the new standard such as safety requirements for slush hydrogen systems and solid state hydrogen storage systems and introductions for hydrogen production by renewable energy are analyzed in this paper.
Flame Acceleration and Transition from Deflagration to Detonation in Hydrogen Explosions
Sep 2011
Publication
Computational Fluid Dynamics solvers are developed for explosion modelling and hazards analysis in Hydrogen air mixtures. The work is presented in two parts. These include firstly a numerical approach to simulate flame acceleration and deflagration to detonation transition (DDT) in hydrogen–air mixture and the second part presents comparisons between two approaches to detonation modelling. The detonation models are coded and the predictions in identical scenarios are compared. The DDT model which is presented here solves fully compressible multidimensional transient reactive Navier–Stokes equations with a chemical reaction mechanism for different stages of flame propagation and acceleration from a laminar flame to a highly turbulent flame and subsequent transition from deflagration to detonation. The model has been used to simulate flame acceleration (FA) and DDT in a 2-D symmetric rectangular channel with 0.04 m height and 1 m length which is filled with obstacles. Comparison has been made between the predictions using a 21-step detailed chemistry as well as a single step reaction mechanism. The effect of initial temperature on the run-up distances to DDT has also been investigated. Comparative study has also been carried out for two detonation solvers. one detonation solver is developed based on the solution of the reactive Euler equations while the other solver has a simpler approach based on Chapman–Jouguet model and the programmed CJ burn method. Comparison has shown that the relatively simple CJ burn approach is unable to capture some very important features of detonation when there are obstacles present in the cloud.
Validation of Cryo-Compressed Hydrogen Storage (CCH2) – A Probabilistic Approach
Sep 2011
Publication
Due to its promising potential to overcome the challenge of thermal endurance of liquid hydrogen storage systems cryo-compressed hydrogen storage (CcH2) is regarded as a verypromising physical storage solution in particular for use in larger passenger vehicles with high energy and long range requirements. A probabilistic approach for validation of safe operation of CcH2 storage systems under automotive requirements and experimental results on life-cycle testing is presented. The operational regime of BMW's CcH2 storage covers pressures of up to 35 MPa and temperatures from +65 C down to -240 C applying high loads on composite and metallic materials of the cryogenic pressure vesselcompared to ambient carbon fiber reinforced pressure vessels. Thus the proof of fatigue strength under combined pressure and deep temperature cyclic loads remains a challenging exercise. Furthermore it will be shown that the typical automotive safety and life-cycle requirements can be fulfilled by the CcH2 vehicle storage system and moreover that the CcH2 storage system can even feature safety advantages over a CGH2 storage system mainly due to the advantageous thermodynamic properties of cryogenic hydrogen the lower storage pressure and due to the intrinsic protection against intrusion through the double-shell design.
Hydrogen Fuel-Cell Forklift Vehicle Releases In Enclosed Spaces
Sep 2011
Publication
Sandia National Laboratories has worked with stakeholders and original equipment manufacturers (OEMs) to develop scientific data that can be used to create risk-informed hydrogen codes and standards for the safe operation of indoor hydrogen fuel-cell forklifts. An important issue is the possibility of an accident inside a warehouse or other enclosed space where a release of hydrogen from the high-pressure gaseous storage tank could occur. For such scenarios computational fluid dynamics (CFD) simulations have been used to model the release and dispersion of gaseous hydrogen from the vehicle and to study the behavior of the ignitable hydrogen cloud inside the warehouse or enclosure. The overpressure arising as a result of ignition and subsequent deflagration of the hydrogen cloud within the warehouse has been studied for different ignition delay times and ignition locations. Both ventilated and unventilated warehouses have been considered in the analysis. Experiments have been performed in a scaled warehouse test facility and compared with simulations to validate the results of the computational analysis.
IPHE Regulations Codes and Standards Working Group-type IV COPV Round Robin Testing
Oct 2015
Publication
This manuscript presents the results of a multi-lateral international activity intended to understand how to execute a cycle stress test as specified in a chosen standard (GTR SAE ISO EIHP …). The purpose of this work was to establish a harmonized test method protocol to ensure that the same results would be achieved regardless of the testing facility. It was found that accurate temperature measurement of the working fluid is necessary to ensure the test conditions remain within the tolerances specified. Continuous operation is possible with adequate cooling of the working fluid but this becomes more demanding if the cycle frequency increases. Recommendations for future test system design and operation are presented.
Flame Propagation Near the Limiting Conditions in a Thin Layer Geometry
Sep 2019
Publication
A series of experiments on hydrogen flame propagation in a thin layer geometry is presented. Premixed hydrogen-air compositions in the range from 6 to 15%(vol.) H2 are tested. Semi-open vertical combustion chamber consists of two transparent Plexiglas side walls with main dimensions of 90x20 cm with a gap from 1 to 10 mm in between. Test mixtures are ignited at the open end of the chamber so that the flame propagates towards the closed end. Ignition position changes from top to bottom in order to take into account an effect of gravity on flame propagation regimes. High-speed shadow imaging is used to visualize and record the combustion process. Thermal-diffusion and Darrieus-Landau instabilities are governing the general flame behaviour. Heat losses to side walls and viscous friction in a thin layer may fully suppress the flame propagation with local or global extinction. The sensitivity to heat losses can be characterized using a Peclet number as a ratio of layer thickness to laminar flame thickness. Approaching to critical Peclet number Pec = 42 the planar or wrinkled flame surface degradants to one-or two-heads "finger" flame propagating straight (for two-heads flame) or chaotic (for one-head "finger" flame). Such a "fingering" of the flame is found for the first time for gaseous systems and very similar to that reported for smouldering or filtering combustion of solid materials and also under micro-gravity conditions. The distance between "fingers" may depend on deficit of limiting component. The processes investigated can be very important from academic and practical points of view with respect to safety of hydrogen fuel cells.
CFD Simulations of the Effect of Ventilation on Hydrogen Release Behavior and Combustion in an Underground Mining Environment
Sep 2013
Publication
CFD simulations investigating the effect of ventilation airflow on hydrogen release behaviour in an underground mining tunnel were performed using FLACS hydrogen. Both dispersion and combustion scenarios of a hydrogen release coming from a severed distribution pipeline were investigated. Effects on the hydrogen dispersion such as ventilation strength and the mechanism of air flow supply (a pull or push fan) and mine opening surface roughness surface cavities and obstructions were explored. Results showing the effect of changing the position of the leak adding a cavity on the ceiling of the tunnel and changing the roughness of the walls are given. Overpressure sensitivity to the ignition delay was also considered. From the results for the varied ventilation regimes and spatial scenarios it is difficult to identify the optimal ventilation strategy giving the safest conditions for hydrogen distribution and refuelling in an underground mine.
Self-acceleration of a Spherically Expanding Hydrogen-air Flame at Elevated Pressure
Sep 2019
Publication
Self-acceleration of a spherically expanding hydrogen-air flame was experimentally investigated in a closed dual-chamber apparatus with the quartz windows enabled to a flame diameter with up to 240 mm. The flame radius and flame speed in lean hydrogen-air mixtures at elevated pressure were evaluated using a high speed Schlieren photography. The experimental results from hydrogen-air explosion at elevated pressure validated the prediction model for self-similar propagation. The flame radius and its speed calculated by the prediction models agree well with the experimental results of hydrogen-air explosions at elevated pressure. Furthermore the acceleration exponent α is evaluated by plotting the flame radius with time. The results show the α value increase with the dimensionless flame radius r/rcl. It is indicated that the self-acceleration and the transition regime to self-similar propagation exist in the spherically expanding hydrogen-air flame.
No more items...