United Kingdom

Currently the technology associated with charging stations for electric vehicles (EV) needs to be studied and improved to further encourage its implementation. This paper presents a new energy management system (EMS) based on a Biogeography-Based Optimization (BBO) algorithm for a hybrid EV charging station with a configuration that integrates Z-source converters (ZSC) into medium voltage direct current (MVDC) grids. The EMS uses the evolutionary BBO algorithm to optimize a fitness function defining the equivalent hydrogen consumption/generation. The charging station consists of a photovoltaic (PV) system a local grid connection two fast charging units and two energy storage systems (ESS) a battery energy storage (BES) and a complete hydrogen system with fuel cell (FC) electrolyzer (LZ) and hydrogen tank. Through the use of the BBO algorithm the EMS manages the energy flow among the components to keep the power balance in the system reducing the equivalent hydrogen consumption and optimizing the equivalent hydrogen generation. The EMS and the configuration of the charging station based on ZSCs are the main contributions of the paper. The behaviour of the EMS is demonstrated with three EV connected to the charging station under different conditions of sun irradiance. In addition the proposed EMS is compared with a simpler EMS for the optimal management of ESS in hybrid configurations. The simulation results show that the proposed EMS achieves a notable improvement in the equivalent hydrogen consumption/generation with respect to the simpler EMS. Thanks to the proposed configuration the output voltage of the components can be upgraded to MVDC while reducing the number of power converters compared with other configurations without ZSC.

The European Commission have just stated that hydrogen would play a major role in the economic recovery of post-COVID-19 EU countries. Hydrogen is recognised as one of the key players in a fossil fuel-free world in decades to come. However commercially practiced pathways to hydrogen production todays are associated with a considerable amount of carbon emissions. The Paris Climate Change Agreement has set out plans for an international commitment to reduce carbon emissions within the forthcoming decades. A sustainable hydrogen future would only be achievable if hydrogen production is “designed” to capture such emissions. Today nearly 98% of global hydrogen production relies on the utilisation of fossil fuels. Among these steam methane reforming (SMR) boasts the biggest share of nearly 3 50% of the global generation. SMR processes correspond to a significant amount of carbon emissions at various points throughout the process. Despite the dark side of the SMR processes they are projected to play a major role in hydrogen production by the first half of this century. This that a sustainable yet clean short/medium-term hydrogen production is only possible by devising a plan to efficiently capture this co-produced carbon as stated in the latest International Energy Agency (IEA) reports. Here we have carried out an in-depth technical review of the processes employed in sorption-enhanced steam methane reforming (SE-SMR) an emerging technology in low-carbon SMR for combined carbon capture and hydrogen production. This paper aims to provide an in-depth review on two key challenging elements of SE-SMR i.e. the advancements in catalysts/adsorbents preparation and current approaches in process synthesis and optimisation including the employment of artificial intelligence in SE-SMR processes. To the best of the authors‟ knowledge there is a clear gap in the literature where the above areas have been scrutinised in a systematic and coherent fashion. The gap is even more pronounced in the application of AI in SE-SMR technologies. As a result this work aims to fill this gap within the scientific literature.

Automotive proton-exchange membrane fuel cells (PEMFCs) have finally reached a state of technological readiness where several major automotive companies are commercially leasing and selling fuel cell electric vehicles including Toyota Honda and Hyundai. These now claim vehicle speed and acceleration refueling time driving range and durability that rival conventional internal combustion engines and in most cases outperform battery electric vehicles. The residual challenges and areas of improvement which remain for PEMFCs are performance at high current density durability and cost. These are expected to be resolved over the coming decade while hydrogen infrastructure needs to become widely available. Here we briefly discuss the status of automotive PEMFCs misconceptions about the barriers that platinum usage creates and the remaining hurdles for the technology to become broadly accepted and implemented.

The performance of four Coriolis flow meters designed for use in hydrogen refuelling stations was evaluated with air and nitrogen by three members of the MetroHyVe JRP consortium; NEL METAS and CESAME EXADEBIT.<br/>A wide range of conditions were tested overall with gas flow rates ranging from (0.05–2) kg/min and pressures ranging from (20–86) bar. The majority of tests were conducted at nominal pressures of either 20 bar or 40 bar in order to match the density of hydrogen at 350 bar and 20 °C or 700 bar and −40 °C. For the conditions tested pressure did not have a noticeable influence on meter performance.<br/>When the flow meters were operated at ambient temperatures and within the manufacturer's recommended flow rate ranges errors were generally within ±1%. Errors within ±0.5% were achievable for the medium to high flow rates.<br/>The influence of temperature on meter performance was also studied with testing under both stable and transient conditions and temperatures as low as −40 °C.<br/>When the tested flow meters were allowed sufficient time to reach thermal equilibrium with the incoming gas temperature effects were limited. The magnitude and spread of errors increased but errors within ±2% were achievable at moderate to high flow rates. Conversely errors as high as 15% were observed in tests where logging began before temperatures stabilised and there was a large difference in temperature between the flow meter and the incoming gas.<br/>One of the flow meters tested with nitrogen was later installed in a hydrogen refuelling station and tested against the METAS Hydrogen Field Test Standard (HFTS). Under these conditions errors ranged from 0.47% to 0.91%. Testing with nitrogen at the same flow rates yielded errors of −0.61% to −0.82%.

Decarbonisation should be very much on the radar of new LNG projects currently taking FID commissioning around 2024-25 and planning to operate up to 2050. The LNG community needs to replace an `advocacy’ message – based on the generality of emissions from combustion of natural gas being lower than from other fossil fuels – with certified data on carbon and methane emissions from specific elements of the value chain for individual projects. As carbon reduction targets tighten over the coming decade LNG cargoes which do not have value chain emissions certified by accredited authorities or which fail to meet defined emission levels run the risk of progressively being deemed to have a lower commercial value and eventually being excluded from jurisdictions with the strictest standards. There will be no place in this process for confidentiality; nothing less than complete transparency of data and methodologies will be acceptable.<br/>In relation to affordability prospects for new projects look much better than they did three years ago. Cost estimates for most new projects suggest that they will be able to deliver profitably to most established and anticipated import markets at or below the wholesale prices prevailing in those markets over the past decade although affordability in south Asian countries may be challenging. But new projects need to factor in costs related to future decarbonisation requirements in both exporting and importing countries. To the extent that LNG suppliers can meet standards through relatively low-cost offsets – forest projects low-cost biogas and biomethane – this may not greatly impact their commercial viability. However any requirement to transform methane into hydrogen with CCS in either the exporting or importing country would substantially impact project economics and the affordability of LNG relative to other energy choices.

The Hy4Heat Safety Assessment has focused on assessing the safe use of hydrogen gas in certain types of domestic properties and buildings. The summary reports (the Precis and the Safety Assessment Conclusions Report) bring together all the findings of the work and should be looked to for context by all readers. The technical reports should be read in conjunction with the summary reports. While the summary reports are made as accessible as possible for general readers the technical reports may be most accessible for readers with a degree of technical subject matter understanding. All of the safety assessment reports have now been reviewed by the HSE<br/>Annex prepared to support Site Specific Safety Cases for hydrogen gas community demonstrations based on work undertaken by the Hy4Heat programme. It covers a collection of recommended risk reduction measures for application downstream of the Emergency Control Valve (ECV)

Low-cost high-performance coatings for hydrogen production via electrolytic water-splitting are of great importance for de-carbonising energy. In this study the Raney2.0 coating was analysed using various electrochemical techniques to assess its absolute performance and it was confirmed to have an extremely low overpotential for hydrogen evolution of just 28 mV at 10 mA/cm². It was also confirmed to be an acceptable catalyst for oxygen evolution making it the highest performing simple bifunctional electrocatalyst known. The coating exhibits an extremely high capacitance of up to 1.7 F/cm² as well as being able to store 0.61 J/cm² in the form of temporary hydride deposits. A new technique is presented that performs a best-fit of a transient simulation of an equivalent circuit containing a constant phase element to cyclic voltammetry measurements. From this the roughness factor of the coating was calculated to be approximately 40000 which is the highest figure ever reported for this type of material. The coating is therefore an extremely useful improved bifunctional coating for the continued roll-out of alkaline electrolysis for large-scale renewable energy capture via hydrogen production.

The engineering correlations for assessment of hazard distance defined by a size of fireball after either liquid hydrogen spill combustion or high-pressure hydrogen tank rupture in a fire in the open atmosphere (both for stand-alone and under-vehicle tanks) are presented. The term “fireball size” is used for the maximum horizontal size of a fireball that is different from the term “fireball diameter” applied to spherical or semi-spherical shape fireballs. There are different reasons for a fireball to deviate from a spherical shape e.g. in case of tank rupture under a vehicle the non-instantaneous opening of tank walls etc. Two conservative correlations are built using theoretical analysis numerical simulations and experimental data available in the literature. The theoretical model for hydrogen fireball size assumes complete isobaric combustion of hydrogen in air and presumes its hemispherical shape as observed in the experiments and the simulations for tank rupturing at the ground level. The dependence of the fireball size on hydrogen mass and fireball’s diameter-to-height ratio is discussed. The correlation for liquid hydrogen release fireball is based on the experiments by Zabetakis (1964). The correlations can be applied as engineering tools to access hazard distances for scenarios of liquid or gaseous hydrogen storage tank rupture in a fire in the open atmosphere

Interest in hydrogen as one route to the decarbonisation of energy systems has risen rapidly over the past few years with the publication of a number of hydrogen strategies from countries across the global energy economy. The momentum in Europe has increased sharply this month with the publication of an EU strategy to incorporate hydrogen into its plans for a net zero emission future. This Comment reviews the key elements of this strategy and provides an initial commentary on the main goals. We highlight the challenges that will be faced in meeting hydrogen production targets in particular via the “green hydrogen” route and analyse the plans for expanding the consumption of hydrogen in Europe. We also assess the infrastructure questions that will need to be answered if and when hydrogen takes on a greater role in the region and note the extensive state support that will be needed in the early years of the implementation of the strategy. Despite this though we applaud the ambition laid out by the EU and look forward to the provision of more detailed plans over the coming months and years.

Link to document on OIES website

The Oxford Institute for Energy Studies held a Workshop on “The Future of Gas Networks” to examine decarbonisation plans and the impact of the potential growth in the use of renewable and decarbonised gases in Europe. Participants included representatives from nine European gas network companies (both transmission and distribution) technical experts in decarbonisation regulators government officials and academics. This document summarises the seven key issues for debate arising from the Workshop discussions:

• The major gas networks recognise the need to prepare for and facilitate decarbonisation.
• The route to decarbonisation can take many forms though hydrogen is likely to feature in most networks. In larger countries solutions are likely to be regional rather than national.
• There are a number of pilot projects and targets/aspirations for 2050 – there is less clarity on how the targets will be achieved or on who will lead.
• Regulation is a key issue. In most countries existing regulatory objectives may need changing in order to align with government decarbonisation aspirations and the achievement of targets.
• There is a lack of consensus on whether and how market models might need to adapt.
• Detailed stakeholder analysis – and in particular customer attitudes – will be required.
• There are a range of important technical issues including standardisation data quality and transparency verification and certification to be considered.

Link to document on Oxford Institute for Energy Studies website