United Kingdom
Thermal Management System Architecture for Hydrogen-Powered Propulsion Technologies: Practices, Thematic Clusters, System Architectures, Future Challenges, and Opportunities
Jan 2022
Publication
The thermal management system architectures proposed for hydrogen-powered propulsion technologies are critically reviewed and assessed. The objectives of this paper are to determine the system-level shortcomings and to recognise the remaining challenges and research questions that need to be sorted out in order to enable this disruptive technology to be utilised by propulsion system manufacturers. Initially a scientometrics based co-word analysis is conducted to identify the milestones for the literature review as well as to illustrate the connections between relevant ideas by considering the patterns of co-occurrence of words. Then a historical review of the proposed embodiments and concepts dating back to 1995 is followed. Next feasible thermal management system architectures are classified into three distinct classes and its components are discussed. These architectures are further extended and adapted for the application of hydrogen-powered fuel cells in aviation. This climaxes with the assessment of the available evidence to verify the reasons why no hydrogen-powered propulsion thermal management system architecture has yet been approved for commercial production. Finally the remaining research challenges are identified through a systematic examination of the critical areas in thermal management systems for application to hydrogen-powered air vehicles’ engine cooling. The proposed solutions are discussed from weight cost complexity and impact points of view by a system-level assessment of the critical areas in the field.
Building Efficiency- Reducing Energy Demand in the Commercial Sector
Dec 2013
Publication
The report was formally launched on 2nd December in Parliament at a panel debate chaired by Lord Whitty and Oliver Colvile and featured representatives from Government and Industry. The report outlines the case for investment by businesses in the energy efficiency of their buildings and operations and highlights how this could help neutralise the threat to profitability posed by increasing energy bills energy price volatility and an increasing reliance on electricity in the commercial sector. The report highlights that business in the UK have the opportunity to not only reduce energy bills but increase their competitiveness and improve worker productivity through better designed buildings.
Optimising Air Quality Co-benefits in a Hydrogen Economy: A Case for Hydrogen-specific Standards for NOx Emissions
Jun 2021
Publication
A global transition to hydrogen fuel offers major opportunities to decarbonise a range of different energyintensive sectors from large-scale electricity generation through to heating in homes. Hydrogen can be deployed as an energy source in two distinct ways in electrochemical fuel cells and via combustion. Combustion seems likely to be a major pathway given that it requires only incremental technological change. The use of hydrogen is not however without side-effects and the widely claimed benefit that only water is released as a by-product is only accurate when it is used in fuel cells. The burning of hydrogen can lead to the thermal formation of nitrogen oxides (NOx – the sum of NO + NO2) via a mechanism that also applies to the combustion of fossil fuels. NO2 is a key air pollutant that is harmful in its own right and is a precursor to other pollutants of concern such as fine particulate matter and ozone. Minimising NOx as a by-product from hydrogen boilers and engines is possible through control of combustion conditions but this can lead to reduced power output and performance. After-treatment and removal of NOx is possible but this increases cost and complexity in appliances. Combustion applications therefore require optimisation and potentially lower hydrogen-specific emissions standards if the greatest air quality benefits are to derive from a growth in hydrogen use
Hydrogen vs. Batteries: Comparative Safety Assessments for a High-Speed Passenger Ferry
Mar 2022
Publication
Batteries and hydrogen constitute two of the most promising solutions for decarbonising international shipping. This paper presents the comparison between a battery and a proton-exchange membrane hydrogen fuel cell version of a high-speed catamaran ferry with a main focus on safety. The systems required for each version are properly sized and fitted according to the applicable rules and their impact on the overall design is discussed. Hazards for both designs were identified; frequency and consequence indexes for them were input qualitatively following Novel Technology Qualification and SOLAS Alternative Designs and Arrangements while certain risk control options were proposed in order to reduce the risks of the most concerned accidental events. The highest ranked risks were analysed by quantitative risk assessments in PyroSim software. The gas dispersion analysis performed for the hydrogen version indicated that it is crucial for the leakage in the fuel cell room to be stopped within 1 s after being detected to prevent the formation of explosive masses under full pipe rupture of 33 mm diameter even with 120 air changes per hour. For the battery version the smoke/fire simulation in the battery room indicated that the firefighting system could achieve a 30% reduction in fire duration with firedoors closed and ventilation shut compared to the scenario without a firefighting system.
Ammonia: Zero-carbon Fertiliser, Fuel and Energy Storage
Feb 2020
Publication
This briefing considers the opportunities and challenges associated with the manufacture and future use of zero-carbon ammonia which is referred to in this report as green ammonia. The production of green ammonia has the capability to impact the transition towards zero-carbon through the decarbonisation of its current major use in fertiliser production. Perhaps as significantly it has the following potential uses: • As a medium to store and transport chemical energy with the energy being released either by directly reacting with air or by the full or partial decomposition of ammonia to release hydrogen. • As a transport fuel by direct combustion in an engine or through chemical reaction with oxygen in the air in a fuel cell to produce electricity to power a motor. • To store thermal energy through the absorption of water and through phase changes between material states (for example liquid to gas).
SGN Project Report - Flame Visibility Risk Assessment
Feb 2021
Publication
This report contains information on the relative risks of natural gas and hydrogen fires particularly regarding their visibility. The fires considered are those that could occur on the H100 Fife trial network. The H100 Fife project will connect a number of residential houses to 100% hydrogen gas supply. The project includes hydrogen production storage and a new distribution network. From a review of large and small-scale tests and incidents it is concluded that hydrogen flames are likely to be clearly visible for releases above 2 bar particularly for larger release rates. At lower pressures hydrogen flame visibility will be affected by ambient lighting background colour and release orientation although this is also the case for natural gas. Potential safety implications from lack of flame visibility are that SGN workers other utility workers or members of the public could inadvertently come into contact with an ignited release. However some releases would be detected through noise thrown soil or interaction with objects. From a workshop and review of risk reduction measures and analysis of historical interference damage incidents it is concluded that flames with the potential for reduced visibility are adequately controlled. This is due to the likelihood of such scenarios occurring being low and that the consequences of coming into contact with such a flame are unlikely to be severe. These conclusions are supported by cost-benefit analysis that shows that no additional risk mitigation measures are justified for the H100 project. It is recommended that the cost-benefit analysis is revisited before applying the approach to a network wider than the H100 project. It was observed that the addition of odorant at relevant concentrations did not have an effect on the visibility of hydrogen flames.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
Regional Insights into Low-carbon Hydrogen Scale Up: World Energy Insights Working Paper
May 2022
Publication
Following the release of the “Hydrogen on the Horizon” series in July and September 2021 the World Energy Council in collaboration with EPRI and PwC led a series of regional deep dives to understand regional differences within low-carbon hydrogen development. These regional deep dives aimed to uncover regional perspectives and differing dynamics for low-carbon hydrogen uptake.<br/>Although each region presents its own distinctive challenges and opportunities the deep dives revealed that the “regional paths” provide new insights into the global scaling up of low-carbon hydrogen in the coming years. In addition each region holds its own unique potential in achieving the Sustainable Development Goals.<br/>Key Takeaways:<br/>1. Our new regional insights indicate that low-carbon hydrogen can play a significant role by 2040 across the world by supporting countries’ efforts towards achieving Paris Agreement goals whilst contributing to the diversity and security of their energy portfolios. This would require significant global trade flows of hydrogen and hydrogen-based fuels.<br/>2. The momentum for hydrogen-based fuels is continuing to grow worldwide but differences are seen between regions – based on differing market activities and opportunities.<br/>3. Today moving from “whether” to “how” to develop low-carbon hydrogen highlights significant uncertainties which need to be addressed if hydrogen is to reach its full potential.<br/>Can the challenges in various supply chain options be overcome?<br/>Can hydrogen play a role in tackling climate change in the short term?<br/>Can bankable projects emerge and the gap between engineers and financers be bridged? Can the stability of supply of the main low-carbon hydrogen production sources be guaranteed?<br/>4. Enabling low-carbon hydrogen at scale would notably require greater coordination and cooperation amongst stakeholders worldwide to better mobilise public and private finance and to shift the focus to end-users and people through the following actions:<br/>Moving from production cost to end-use price<br/>Developing Guarantees of Origin schemes with sustainability requirements<br/>Developing a global monitoring and reporting tool on low-carbon hydrogen projects<br/>Better consideration of social impacts alongside economic opportunities
HyDeploy2: Materials Summary and Interpretation
May 2021
Publication
During the exemption application process the original report was evaluated as part of a regulatory review and responses to questions submitted for further consideration. These have been addressed in this revised version (revision 1) in the form of an addendum. The addendum includes the question raised its number and the response to it. The area of the main body of the report to which each question and response refers is indicated by square brackets and the addendum number e.g. [A1].<br/>Through analysis of the literature and results of the practical testing the susceptibility of materials present in the Winlaton trial site to hydrogen degradation has been assessed with consideration of the Winlaton operating conditions (up to 20% H2 at total blend pressures of 20 mbar – 2 bar). The aim of this report has been to determine whether there are any components which have been identified at the Winlaton trial site which could have a significantly increased risk of failure due to their exposure to hydrogen during the one year trial. Where possible direct supporting data has been used to make assessments on the likelihood of failure; in other cases the assessment was aided by collaborative expert opinion in the fields of mechanical engineering materials science and the domestic gas industry.<br/>Click on the supplements tab to view the other documents from this report
Direct Evidence for Solid-like Hydrogen in a Nanoporous Carbon Hydrogen Storage Material at Supercritical Temperatures
Jul 2015
Publication
Here we report direct physical evidence that confinement of molecular hydrogen (H2) in an optimized nanoporous carbon results in accumulation of hydrogen with characteristics commensurate with solid H2 at temperatures up to 67 K above the liquid vapor critical temperature of bulk H2. This extreme densification is attributed to confinement of H2 molecules in the optimally sized micropores and occurs at pressures as low as 0.02 MPa. The quantities of contained solid-like H2 increased with pressure and were directly evaluated using in situ inelastic neutron scattering and confirmed by analysis of gas sorption isotherms. The demonstration of the existence of solid-like H2 challenges the existing assumption that supercritical hydrogen confined in nanopores has an upper limit of liquid H2 density. Thus this insight offers opportunities for the development of more accurate models for the evaluation and design of nanoporous materials for high capacity adsorptive hydrogen storage.
A Zero Carbon Route to the Supply of High-temperature Heat Through the Integration of Solid Oxide Electrolysis Cells and H2–O2 Combustion
Aug 2022
Publication
Previously suggested options to achieve carbon neutrality involve the use of fossil fuels with carbon capture or exploiting biomass as sources of energy. Industrial high-temperature heating could possibly exploit electrical heating or combustion using hydrogen. However it is difficult to replace all the current coal or natural gas furnaces with these options for chemical industry. In this work a method that integrates solid oxide electrolysis cells (SOEC) and H2–O2 combustion is proposed and the related parameters are modelled to analyze their impacts. There is no waste heat and waste emissions in the proposed option and all substances are recycled. Unlike previous research the heat required for SOEC operation is generated from H2 combustion. The best working condition is under thermoneutral voltage and the highest electricity-to-thermal efficiency that can be achieved is 86.88% under a current density of 12000 A/m2 and operating temperature of 750 ◦C. Ohmic overpotential has the greatest effect on electricity consumption and the anode activation overpotential is the second most important option. Increasing combustion product temperature cannot significantly improve thermal efficiency but can raise the available maximum thermal energy.
Techno-economic Assessment of Offshore Wind-to-hydrogen Scenarios: A UK Case Study
Jan 2023
Publication
The installed capacity electricity generation from wind and the curtailment of wind power in the UK between 2011 and 2021 showed that penetration levels of wind energy and the amount of energy that is curtailed in future would continue to rise whereas the curtailed energy could be utilised to produce green hydrogen. In this study data were collected technologies were chosen systems were designed and simulation models were developed to determine technical requirements and levelised costs of hydrogen produced and transported through different pathways. The analysis of capital and operating costs of the main components used for onshore and offshore green hydrogen production using offshore wind including alternative strategies for hydrogen storage and transport and hydrogen carriers showed that a significant reduction in cost could be achieved by 2030 enabling the production of green hydrogen from offshore wind at a competitive cost compared to grey and blue hydrogen. Among all scenarios investigated in this study compressed hydrogen produced offshore is the most cost-effective scenario for projects starting in 2025 although the economic feasibility of this scenario is strongly affected by the storage period and the distance to the shore of the offshore wind farm. Alternative scenarios for hydrogen storage and transport such as liquefied hydrogen and methylcyclohexane could become more cost-effective for projects starting in 2050 when the levelised cost of hydrogen could reach values of about £2 per kilogram of hydrogen or lower.
Methodologies for Representing the Road Transport Sector in Energy System Models
Dec 2013
Publication
Energy system models are often used to assess the potential role of hydrogen and electric powertrains for reducing transport CO2 emissions in the future. In this paper we review how different energy system models have represented both vehicles and fuel infrastructure in the past and we provide guidelines for their representation in the future. In particular we identify three key modelling decisions: the degree of car market segmentation the imposition of market share constraints and the use of lumpy investments to represent infrastructure. We examine each of these decisions in a case study using the UK MARKAL model. While disaggregating the car market principally affects only the transition rate to the optimum mix of technologies market share constraints can greatly change the optimum mix so should be chosen carefully. In contrast modelling infrastructure using lumpy investments has little impact on the model results. We identify the development of new methodologies to represent the impact of behavioural change on transport demand as a key challenge for improving energy system models in the future.
IGEM/TD/1 Edition 6 Supplement 2 - High Pressure Hydrogen Pipelines
Nov 2021
Publication
This Supplement gives additional requirements and qualifications for the transmission of Hydrogen including Natural Gas/Hydrogen blended mixtures (subsequently referred to as NG/H blends) and for the repurposing of Natural Gas (NG) pipelines to Hydrogen service. For the purposes of this document any NG/H blend above 10% MOL is considered to be an equivalence to 100% hydrogen. For blends below 10% MOL there is no evidence to confirm that blends containing up to 10 mol.% hydrogen do not cause material degradation but it is considered that the risk is low.
This Supplement covers the design construction inspection testing operation and maintenance of steel pipelines and certain associated installations in Hydrogen service and the repurposing of NG pipelines to Hydrogen service at maximum operating pressure (MOP) exceeding 7 bar and not exceeding 137.9 bar.
This standard can be purchased here
This Supplement covers the design construction inspection testing operation and maintenance of steel pipelines and certain associated installations in Hydrogen service and the repurposing of NG pipelines to Hydrogen service at maximum operating pressure (MOP) exceeding 7 bar and not exceeding 137.9 bar.
This standard can be purchased here
Future Electricity Series Part 3 - Power from Nuclear
Mar 2014
Publication
This independent cross-party report highlights the key role that political consensus can play in helping to reduce the costs of nuclear power in the UK as well as other low carbon technologies. This political consensus has never been more important than in this ‘defining decade’ for the power sector. The report highlights that an immediate challenge facing the UK’s new build programme is agreeing with the European Commission a regime for supporting new nuclear power. Changing the proposed support package would not be an impossible task if made necessary but maintaining broad political consensus and considering the implications of delay are also important. The State Aid process is an important opportunity for scrutiny with the report demonstrating that shareholders for Hinkley Point C could see bigger returns (19-21%) than those typically expected for PFI projects (12-15%). However it is too early to conclude on the value for money of the Hinkley Point C agreement. Both the negotiation process and the resulting investment contract are important but there has been little transparency over either so far and the negotiations were not competitive. The inquiry calls for more urgency and better coordination in seizing the opportunity to reuse the UK’s plutonium stockpile.
The UK’s stockpile of separated plutonium presents opportunities to tackle a number of national strategic priorities including implementing long term solutions for nuclear waste developing new technologies that could redefine the sector laying the ground for new nuclear power and pursuing nuclear non-proliferation. Government has identified three ‘credible solutions’ for reuse and the report recommends that it now sets clearer criteria against which to assess options and identifies budgetary requirements to help expediate the process. The report also argues that Government should do more on new nuclear technologies that could redefine the sector – such as considering smaller reactors nuclear for industrial heat or hydrogen production and closed or thorium fuel cycles. The Government’s initial response to a review of nuclear R&D a year ago by the then Chief Scientific Advisor Sir John Beddington has been welcome and it needs to build on this. In particular the UK should capitalise upon its existing expertise and past experience to focus efforts where there is most strategic value. Nulcear waste. Having failed to date the Government must urgently revisit plans for finding a site to store nuclear waste underground for thousands of years. Implementing this is a crucial part of demonstrating that nuclear waste is a manageable challenge. Despite being rejected by Cumbria County Council the continuing strong support amongst communities in West Cumbria for hosting a site is a promising sign.
On affordability the report finds that it is not yet clear which electricity generation technologies will be cheapest in the 2020s and beyond. Coal and gas could get more expensive if fossil fuel and carbon prices rise whilst low carbon technologies could get cheaper as technology costs fall with more deployment. This is the main reason for adopting an ‘all of the above’ strategy including nuclear power until costs become clearer and there is broad consensus behind this general approach.
On security of supply the inquiry says that deployment of nuclear power is likely to be influenced more by the economics of system balancing rather than technical system balancing challenges which can be met with greater deployment of existing balancing tools. The cost of maintaining system security is likely to mean that the UK maintains at least some baseload capacity such as nuclear power to limit system costs.
On sustainability the report finds that the environmental impacts of nuclear power are comparable to some generation technologies and favourable to others although the long lived nature of some radioactive nuclear waste and the dual use potential of nuclear technology for civil and military applications create unique sustainability challenges which the UK is a world leader in managing.
It is the final report of the Future Electricity Series an independent and cross party inquiry into the UK power sector sponsored by the Institution of Gas Engineers and Managers
The UK’s stockpile of separated plutonium presents opportunities to tackle a number of national strategic priorities including implementing long term solutions for nuclear waste developing new technologies that could redefine the sector laying the ground for new nuclear power and pursuing nuclear non-proliferation. Government has identified three ‘credible solutions’ for reuse and the report recommends that it now sets clearer criteria against which to assess options and identifies budgetary requirements to help expediate the process. The report also argues that Government should do more on new nuclear technologies that could redefine the sector – such as considering smaller reactors nuclear for industrial heat or hydrogen production and closed or thorium fuel cycles. The Government’s initial response to a review of nuclear R&D a year ago by the then Chief Scientific Advisor Sir John Beddington has been welcome and it needs to build on this. In particular the UK should capitalise upon its existing expertise and past experience to focus efforts where there is most strategic value. Nulcear waste. Having failed to date the Government must urgently revisit plans for finding a site to store nuclear waste underground for thousands of years. Implementing this is a crucial part of demonstrating that nuclear waste is a manageable challenge. Despite being rejected by Cumbria County Council the continuing strong support amongst communities in West Cumbria for hosting a site is a promising sign.
On affordability the report finds that it is not yet clear which electricity generation technologies will be cheapest in the 2020s and beyond. Coal and gas could get more expensive if fossil fuel and carbon prices rise whilst low carbon technologies could get cheaper as technology costs fall with more deployment. This is the main reason for adopting an ‘all of the above’ strategy including nuclear power until costs become clearer and there is broad consensus behind this general approach.
On security of supply the inquiry says that deployment of nuclear power is likely to be influenced more by the economics of system balancing rather than technical system balancing challenges which can be met with greater deployment of existing balancing tools. The cost of maintaining system security is likely to mean that the UK maintains at least some baseload capacity such as nuclear power to limit system costs.
On sustainability the report finds that the environmental impacts of nuclear power are comparable to some generation technologies and favourable to others although the long lived nature of some radioactive nuclear waste and the dual use potential of nuclear technology for civil and military applications create unique sustainability challenges which the UK is a world leader in managing.
It is the final report of the Future Electricity Series an independent and cross party inquiry into the UK power sector sponsored by the Institution of Gas Engineers and Managers
A Review on Ports' Readiness to Facilitate International Hydrogen Trade
Jan 2023
Publication
The existing literature on the hydrogen supply chains has knowledge gaps. Most studies focus on hydrogen production storage transport and utilisation but neglect ports which are nexuses in the supply chains. To fill the gap this paper focuses on ports' readiness for the upcoming hydrogen international trade. Potential hydrogen exporting and importing ports are screened. Ports' readiness for hydrogen export and import are reviewed from perspectives of infrastructure risk management public acceptance regulations and standards and education and training. The main findings are: (1) liquid hydrogen ammonia methanol and LOHCs are suitable forms for hydrogen international trade; (2) twenty ports are identified that could be first movers; among them twelve are exporting ports and eight are importing ports; (3) ports’ readiness for hydrogen international trade is still in its infancy and the infrastructure construction or renovation risk management measures establishment of regulations and standards education and training all require further efforts.
Moving Toward the Low-carbon Hydrogen Economy: Experiences and Key Learnings from National Case Studies
Sep 2022
Publication
The urgency to achieve net-zero carbon dioxide (CO2) emissions by 2050 as first presented by the IPCC special report on 1.5°C Global Warming has spurred renewed interest in hydrogen to complement electrification for widespread decarbonization of the economy. We present reflections on estimates of future hydrogen demand optimization of infrastructure for hydrogen production transport and storage development of viable business cases and environmental impact evaluations using life cycle assessments. We highlight challenges and opportunities that are common across studies of the business cases for hydrogen in Germany the UK the Netherlands Switzerland and Norway. The use of hydrogen in the industrial sector is an important driver and could incentivise large-scale hydrogen value chains. In the long-term hydrogen becomes important also for the transport sector. Hydrogen production from natural gas with capture and permanent storage of the produced CO2 (CCS) enables large-scale hydrogen production in the intermediate future and is complementary to hydrogen from renewable power. Furthermore timely establishment of hydrogen and CO2 infrastructures serves as an anchor to support the deployment of carbon dioxide removal technologies such as direct air carbon capture and storage (DACCS) and biohydrogen production with CCS. Significant public support is needed to ensure coordinated planning governance and the establishment of supportive regulatory frameworks which foster the growth of hydrogen markets.
HyDeploy2: Summary of Procedures for the Trial Network
Jun 2021
Publication
The assessment of appropriate operational procedures to govern the injection of a hydrogen/natural gas blend into Northern Gas Networks’ (NGN) Winlaton gas distribution network was a key requirement of the HyDeploy2 project. To perform this assessment the review was broken down into two areas procedures upstream of the emergency control valve (owned by NGN) and procedures downstream of the Emergency Control Valve (procedures which would be performed by Gas Safe registered individuals). Assessment of the upstream procedures was led by NGN (own and carry out all upstream procedures on NGN’s gas network) and assessment of the downstream procedures was led by Blue Flame Associates (an industry expert on downstream gas procedures).<br/>Methodologies were adopted to be able to highlight procedures that could potentially be used on the Winlaton trial network during the hydrogen blended gas injection period and if they were impacted by the changing of the gas within the network from natural gas to hydrogen blended gas. This method determined that for downstream gas procedures a total of 56 gas procedures required expert review resulting in 80 technical questions to be assessed and for the upstream gas procedures a total of 80 gas procedures required expert review resulting in 266 technical questions to be assessed.<br/>The operational procedures assessment has led to a determination as to whether a change is or is not required for relevant operational procedures where a basis of concern existed with respect to the injection of hydrogen blended gas. Any requirements to modify an existing procedure has been given in this report referencing the source as to where the detailed analysis for the change/no change recommendation has been given.<br/>The assessment took into account the associated experimental and research carried out as part of the HyDeploy and HyDeploy2 projects such as the assessment of gas characteristics materials impact appliance survey of assets on the Winlaton network and impact of hydrogen blended gas on gas detection equipment references to these studies have been given accordingly to associated impacted operational procedures.<br/>The conclusion of the assessment is that for upstream gas procedures there are some operational procedures that are unchanged some that require an increase in the frequency as to how often they are performed and some procedures which require a technical modification. For downstream domestic gas procedures all procedures applicable to a domestic gas installation were deemed to not be detrimentally affected by the introduction of a 20 mol% hydrogen blend.<br/>For upstream gas procedures an appropriate training package will be built off the back of the results presented in this report and disseminated accordingly to all relevant Operatives that will be responsible for the safety operation and maintenance of the Winlaton network during the hydrogen blend injection period. For downstream gas procedures the Gas Safe community have been fully engaged and informed about the trial.<br/>Click on the supplements tab to view the other documents from this report
Comparative Sustainability Study of Energy Storage Technologies Using Data Envelopment Analysis
Mar 2022
Publication
The transition to energy systems with a high share of renewable energy depends on the availability of technologies that can connect the physical distances or bridge the time differences between the energy supply and demand points. This study focuses on energy storage technologies due to their expected role in liberating the energy sector from fossil fuels and facilitating the penetration of intermittent renewable sources. The performance of 27 energy storage alternatives is compared considering sustainability aspects by means of data envelopment analysis. To this end storage alternatives are first classified into two clusters: fast-response and long-term. The levelized cost of energy energy and water consumption global warming potential and employment are common indicators considered for both clusters while energy density is used only for fast-response technologies where it plays a key role in technology selection. Flywheel reveals the highest efficiency between all the fast-response technologies while green ammonia powered with solar energy ranks first for long-term energy storage. An uncertainty analysis is incorporated to discuss the reliability of the results. Overall results obtained and guidelines provided can be helpful for both decision-making and research and development purposes. For the former we identify the most appealing energy storage options to be promoted while for the latter we report quantitative improvement targets that would make inefficient technologies competitive if attained. This contribution paves the way for more comprehensive studies in the context of energy storage by presenting a powerful framework for comparing options according to multiple sustainability indicators.
A Multi-period Sustainable Hydrogen Supply Chain Model Considering Pipeline Routing and Carbon Emissions: The Case Study of Oman
Nov 2022
Publication
This paper presents a mathematical model for a multi-period hydrogen supply chain design problem considering several design features not addressed in other studies. The model is formulated as a mixed-integer program allowing the production and storage facilities to be extended over time. Pipeline and tube trailer transport modes are considered for carrying hydrogen. The model also allows finding the optimal pipeline routes and the number of transport units. The objective is to obtain an efficient supply chain design within a given time frame in a way that the demand and carbon dioxide emissions constraints are satisfied and the total cost is minimized. A computer program is developed to ease the problem-solving process. The computer program extracts the geographical information from Google Maps and solves the problem using an optimization solver. Finally the applicability of the proposed model is demonstrated in a case study from Oman.
Fuel Cell Development for New Energy Vehicles (NEVs) and Clean Air in China
Apr 2018
Publication
This paper reviews the background to New Energy Vehicles (NEV) policies in China and the key scientific and market challenges that need to be addressed to accelerate fuel cells (FCs) in the rapidly developing NEV market. The global significance of the Chinese market key players core FC technologies and future research priorities are discussed.
Technology Roadmaps for Transition Management: The Case of Hydrogen Energy
Oct 2011
Publication
Technology roadmaps are increasingly used by governments to inform and promote technological transitions such as a transition to a hydrogen energy system. This paper develops a framework for understanding how current roadmapping practice relates to emerging theories of the governance of systems innovation. In applying this framework to a case study of hydrogen roadmaps the paper finds that roadmapping for transitions needs to place greater emphasis on ensuring good quality and transparent analytic and participatory procedures. To be most useful roadmaps should be embedded within institutional structures that enable the incorporation of learning and re-evaluation but in practice most transition roadmaps are one-off exercises
Techno-Economic Analysis of Hydrogen Storage Technologies for Railway Engineering: A Review
Sep 2022
Publication
According to the specific requirements of railway engineering a techno-economic comparison for onboard hydrogen storage technologies is conducted to discuss their feasibility and potentials for hydrogen-powered hybrid trains. Physical storage methods including compressed hydrogen (CH2 ) liquid hydrogen (LH2 ) and cryo-compressed hydrogen (CcH2 ) and material-based (chemical) storage methods such as ammonia liquid organic hydrogen carriages (LOHCs) and metal hydrides are carefully discussed in terms of their operational conditions energy capacity and economic costs. CH2 technology is the most mature now but its storage density cannot reach the final target which is the same problem for intermetallic compounds. In contrast LH2 CcH2 and complex hydrides are attractive for their high storage density. Nevertheless the harsh working conditions of complex hydrides hinder their vehicular application. Ammonia has advantages in energy capacity utilisation efficiency and cost especially being directly utilised by fuel cells. LOHCs are now considered as a potential candidate for hydrogen transport. Simplifying the dehydrogenation process is the important prerequisite for its vehicular employment. Recently increasing novel hydrogen-powered trains based on different hydrogen storage routes are being tested and optimised across the world. It can be forecasted that hydrogen energy will be a significant booster to railway decarbonisation.
Optimising Fuel Supply Chains within Planetary Boundaries: A Case Study of Hydrogen for Road Transport in the UK
Jul 2020
Publication
The world-wide sustainability implications of transport technologies remain unclear because their assessment often relies on metrics that are hard to interpret from a global perspective. To contribute to filling this gap here we apply the concept of planetary boundaries (PBs) i.e. a set of biophysical limits critical for operating the planet safely to address the optimal design of sustainable fuel supply chains (SCs) focusing on hydrogen for vehicle use. By incorporating PBs into a mixed-integer linear programming model (MILP) we identify SC configurations that satisfy a given transport demand while minimising the PBs transgression level i.e. while reducing the risk of surpassing the ecological capacity of the Earth. On applying this methodology to the UK we find that the current fossil-based sector is unsustainable as it transgresses the energy imbalance CO2 concentration and ocean acidification PBs heavily i.e. five to 55-fold depending on the downscale principle. The move to hydrogen would help to reduce current transgression levels substantially i.e. reductions of 9–86% depending on the case. However it would be insufficient to operate entirely within all the PBs concurrently. The minimum impact SCs would produce hydrogen via water electrolysis powered by wind and nuclear energy and store it in compressed form followed by distribution via rail which would require as much as 37 TWh of electricity per year. Our work unfolds new avenues for the incorporation of PBs in the assessment and optimisation of energy systems to arrive at sustainable solutions that are entirely consistent with the carrying capacity of the planet.
Estimates of the Decarbonization Potential of Alternative Fuels for Shipping as a Function of Vessel Type, Cargo, and Voyage
Oct 2022
Publication
Fuel transition can decarbonize shipping and help meet IMO 2050 goals. In this paper HFO with CCS LNG with CCS bio-methanol biodiesel hydrogen ammonia and electricity were studied using empirical ship design models from a fleet-level perspective and at the Tank-ToWake level to assist operators technology developers and policy makers. The cargo attainment rate CAR (i.e. cargo that must be displaced due to the low-C propulsion system) the ES (i.e. TTW energy needed per ton*n.m.) the CS (economic cost per ton*n.m.) and the carbon intensity index CII (gCO2 per ton*n.m.) were calculated so that the potential of the various alternatives can be compared quantitatively as a function of different criteria. The sensitivity of CAR towards ship type fuel type cargo type and voyage distance were investigated. All ship types had similar CAR estimates which implies that considerations concerning fuel transition apply equally to all ships (cargo containership tankers). Cargo type was the most sensitive factor that made a ship either weight or volume critical indirectly impacting on the CAR of different fuels; for example a hydrogen ship is weight-critical and has 2.3% higher CAR than the reference HFO ship at 20000 nm. Voyage distance and fuel type could result in up to 48.51% and 11.75% of CAR reduction. In addition to CAR the ES CS and CII for a typical mission were calculated and it was found that HFO and LNG with CCS gave about 20% higher ES and CS than HFO and biodiesel had twice the cost while ammonia methanol and hydrogen had 3–4 times the CS of HFO and electricity about 20 times suggesting that decarbonisation of the world’s fleet will come at a large cost. As an example of including all factors in an effort to create a normalized scoring system an equal weight was allocated to each index (CAR ES CS and CII). Biodiesel achieved the highest score (80%) and was identified as the alternative with the highest potential for a deep-seagoing containership followed by ammonia hydrogen bio-methanol and CCS. Electricity has the lowest normalized score of 33%. A total of 100% CAR is achievable by all alternative fuels but with compromises in voyage distance or with refuelling. For example a battery containership carrying an equal amount of cargo as an HFO-fuelled containership can only complete 13% of the voyage distance or needs refuelling seven times to complete 10000 n.m. The results can guide decarbonization strategies at the fleet level and can help optimise emissions as a function of specific missions.
Assessment of Operability and Inspection, Maintenance and Repair Requirements for Transmission Pipelines and Installations in Hydrogen Service
Apr 2021
Publication
This report has been prepared for Hytechnical work programme to support the technical strategy for repurposing existing transmission pipelines and installations for the transportation and distribution of hydrogen and natural gas / hydrogen blends. The aim of the Hytechnical work programme is to support the implementation of the IGEM supplements to the standards TD/1 TD/13 TD/3 and TD/4.<br/>The report covers a desk study into the requirements for the inspection maintenance operation and repair of above 7 bar natural gas pipelines and installations designed and operated in accordance with the standards existing IGEM/TD/1 and IGEM/TD/13 which are repurposed for hydrogen service.
Experimental Parameters of Ignited Congestion Experiments of Liquid Hydrogen in the PRESLHY Project
Sep 2021
Publication
Liquid hydrogen (LH2) has the potential to form part of the UK energy strategy in the future and therefore could see widespread use due to the relatively high energy density when compared to other renewable energy sources. To study the feasibility of this the European Fuel Cells and Hydrogen Joint Undertaking (FCH JU) funded project PRESLHY undertook pre-normative research for the safe use of cryogenic LH2 in non-industrial settings. Several key scenarios were identified as knowledge gaps and both theoretical and experimental studies were conducted to provide insight into these scenarios. This included experiments studying the effect of congestion on an ignited hydrogen plume that develops from a release of LH2; this paper describes the objectives experimental setup and a summary of the results from these activities. Characterisation of the LH2 release hydrogen concentration and temperatures measurements within the resulting gas cloud was undertaken along with pressure measurements both within the cloud and further afield. Various release conditions and congestion levels were studied. Results showed that at high levels of congestion increased overpressures occurred with the higher flow rates studied including one high order event. Data generated from these experiments is being taken forward to generate and validate theoretical models ultimately to contribute to the development of regulations codes and standards (RCS) for LH2."
Review of IGEM/SR/25 for Use with Hydrogen
Jan 2021
Publication
This report presents the findings of the initial gap analysis and technical review of IGEM/SR/25 undertaken as a collaborative effort between HSE and DNV GL. The review is intended to help understand the steps which would be involved in updating the standard to include data appropriate for installations using H2 or an H2/NG blend. Furthermore the report highlights where additional research and updated data applicable to H2 installations is needed to enable development of an H2-specific supplement to the standard.<br/>A review of alternative approaches for area classification is presented. This review is aimed at determining whether existing standards or guidance provide methodologies which could be used as an alternative to IGEM/SR/25 for area classification of systems using either H2 or H2/NG blends. The review covers IGEM/SR/25 IGE/SR/23 EI15 BCGA guidance BS EN 60079:10:1 (including Quadvent) NFPA 497 API RP 505 and EIGA Doc. 121/14. Some of these are general like the British Standard BS EN 60079-10-1:2015 while others are industry specific like IGEM/SR/25 and EI15.<br/>Consideration is given to the methodology that each area classification approach presents for establishing the zone and zone size with particular focus on how factors such as ventilation and gas buoyancy are accounted for in the methods. The findings of the review indicate that none of the alternative approaches evaluated in the study provide an approach that is suitable for the gas industry for the area classification of gas network installations involving H2 or an H2/NG blend.
Gas Goes Green: Britain's Hydrogen Blending Delivery Plan
Jan 2022
Publication
Britain’s Hydrogen Blending Delivery Plan which sets out how all five of Britain’s gas grid companies will meet the Government’s target for Britain’s network of gas pipes to be ready to deliver 20% hydrogen to homes and businesses from 2023 as a replacement for natural gas.
HydroGenerally - Episode 3: Lift Off for Hydrogen in Aviation
Apr 2022
Publication
In this third episode Steffan Eldred and Hannah Abson from Innovate UK KTN are exploring the scale of the opportunity that hydrogen and aviation present alongside their special guest Katy Milne Head of Industrial Strategy at FlyZero.
The podcast can be found on their website
The podcast can be found on their website
Assessment of Hydrogen Flame Length Full Bore Pipeline Rupture
Sep 2021
Publication
The study aims at the development of a safety engineering methodology for the assessment of flame length after full-bore rupture of hydrogen pipeline. The methodology is validated using experimental data on hydrogen jet flame from full-bore pipeline rupture by Acton et al. (2010). The experimental pressure dynamics in the hydrogen pipeline system is simulated using previously developed adiabatic and “isothermal” blowdown models. The hydrogen release area is taken as equal similar to the experiment to doubled pipeline cross-section as hydrogen was coming out from both sides of the ruptured pipe. The agreement with the experimental pressure decay in the piping system was achieved using discharge coefficient CD=0.26 and CD=0.21 for adiabatic and “isothermal” blowdown model respectively that indicates significant friction and minor pressure losses. The hydrogen flame length was calculated using the dimensionless correlation by Molkov and Saffers (2013). The correlation relies on the density of hydrogen in the choked flow at the pipe exit. The maximum experimental flame length between 92 m and 111 m was recorded at 6 s after the pipe rupture under the ground. The calculated by the dimensionless correlation flame length is 110 m and 120 m for the “isothermal” and adiabatic blowdown model respectively. This is an acceptable accuracy for such a large-scale experiment. It is concluded that the methodology can be applied as an engineering tool to assess flame length resulting from ruptured hydrogen pipelines.
Techno-economic Viability of Islanded Green Ammonia as a Carbon-free Energy Vector and as a Substitute for Conventional Production
Jul 2020
Publication
Decarbonising ammonia production is an environmental imperative given that it independently accounts for 1.8% of global carbon dioxide emissions and supports the feeding of over 48% of the global population. The recent decline of production costs and its potential as an energy vector warrant investigation of whether green ammonia production is commercially competitive. Considering 534 locations in 70 countries and designing and operating the islanded production process to minimise the levelised cost of ammonia (LCOA) at each we show the range of achievable LCOA the cost of process flexibility the components of LCOA and therein the scope of LCOA reduction achievable at present and in 2030. These results are benchmarked against ammonia spot prices cost per GJ of refined fuels and the LCOE of alternative energy storage methods. Currently a LCOA of $473 t1 is achievable at the best locations the required process flexibility increases the achievable LCOA by 56%; the electrolyser CAPEX and operation are the most significant costs. By 2030 $310 t1 is predicted to be achievable with multiple locations below $350 t1 . At $25.4 GJ11 ) that do not have the benefit of being carbon-free.
Next Steps for the Gas Grid- Future Gas Series Part 1
Sep 2014
Publication
Policy Connect Carbon Connect and sector and Parliamentary experts have collaborated to present options for the gas grid to play a useful role in the UK’s transition to a low carbon energy system through the widespread use of low carbon gas. The report calls on Government to support the transition to a more flexible gas grid that uses various forms of gas including low carbon gases such as hydrogen and biomethane.
A Techno-economic Analysis of Ammonia-fuelled Powertrain Systems for Rail Freight
Apr 2023
Publication
All diesel-only trains in the UK will be removed from services by 2040. High volumetric density rapid refuelling ability and sophisticated experience in infrastructure and logistics make ammonia a perfect hydrogen carrying fuel for rail freight which urgently requires an economically viable solution. This study conducted a novel techno-economic study of ammonia-fuelled fuel cell powertrains to be compared with current diesel engine-based system and emerging direct hydrogen-fuelled fuel cell system. The results demonstrate that hydrogen-fuelled Proton Exchange Membrane Fuel Cells (PEMFCs) and ammonia-fuelled PEMFCs (using an ammonia cracker) are more cost-effective in terms of Levelized Cost of Electricity. The ammonia fuel storage requires 61.5-75 % less space compared to the hydrogen storage. Although the ammonia-fuelled Solid Oxide Fuel Cells (SOFCs) powertrain has the highest electricity generation efficiency (56%) the overall cost requires a major reduction by 70% before it could be considered as an economically viable solution.
Effect of TPRD Diameter and Direction of Release on Hydrogen Dispersion in Underground Parking
Sep 2021
Publication
Unignited hydrogen release in underground parking could be considered inherently safer if the safety strategy to avoid the formation of the flammable hydrogen-air mixture under a ceiling is followed. This strategy excludes destructive deflagrative combustion and associated pressure and thermal effects in the case of ignition. This paper aims at understanding the effects of the thermally activated pressure relieve device (TPRD) diameter and direction of release on the build-up of hydrogen flammable concentration under the ceiling in the presence of mechanical ventilation required for underground parking. The study employs the similarity law for hydrogen jet concentration decay in a free under-expanded jet to find the lower limit of TPRD diameter that excludes the formation of a flammable mixture under the ceiling during upward release. This approach is conservative and does not include the effect of mechanical ventilation providing flow velocity around a few meters per second which is significantly below velocities in hydrogen momentum-dominated under-expanded jets. Hydrogen releases downwards under a vehicle at different angles and with different air velocities due to mechanical ventilation were investigated using computational fluid dynamics (CFD). The joint effect of TPRD diameter release direction and mechanical ventilation is studied. TPRD diameters for the release of hydrogen upwards and downwards preventing the creation of flammable hydrogen-air mixture under the parking ceiling are defined for different ceiling heights and locations of TPRD above the floor. Recommendations to the design of TPRD devices to underpin the safe introduction of hydrogen fuelled vehicles in currently existing underground parking and infrastructure are formulated."
Techno Environmental Assessment of Flettner Rotor as Assistance Propulsion System for LH2 Tanker Ship Fuelled by Hydrogen
Nov 2022
Publication
This study presents a novel design and development of a 280000 m3 liquefied hydrogen tanker ship by implementing a set of 6 Flettner rotors as an assistance propulsion system in conjunction with a combined-cycle gas turbine fuelled by hydrogen as a prime mover. The study includes assessment of the technical and environmental aspects of the developed design. Furthermore an established method was applied to simulate the LH2 tanker in different voyages and conditions to investigate the benefits of harnessing wind energy to assist combined-cycle gas turbine in terms of performance and emission reduction based on engine behaviour for different voyages under loaded and unloaded normal as well as 6 % degraded engine and varying ambient conditions. The results indicate that implementing a set of 6 Flettner rotors for the LH2 tanker ship has the potential to positively impact the performance and lead to environmental benefits. A maximum contribution power of around 1.8 MW was achieved in the winter season owing to high wind speed and favourable wind direction. This power could save approximately 3.6 % of the combined-cycle gas turbine total output power (50 MW) and cause a 3.5 % reduction in NOx emissions.
Ammonia, Methane and Hydrogen for Gas Turbines
Aug 2015
Publication
Ammonia has been identified as a sustainable fuel for transport and power applications. Similar to hydrogen ammonia is a synthetic product that can be obtained either from fossil fuels biomass or other renewable sources. Since the 1960’s considerable research has taken place to develop systems capable of burning the material in gas turbines. However it is not until recently that interest in ammonia has regained some momentum in the energy agenda as it is a carbon free carrier and offers an energy density higher than compressed hydrogen. . Therefore this work examines combustion stability and emissions from gaseous ammonia blended with methane or hydrogen in gas turbines. Experiments were carried out in a High Pressure Combustion Rig under atmospheric conditions employing a bespoke generic swirl burner. OH* Chemiluminescense was used for all trials to determine reactivity of the radical. Emissions were measured and correlated to equilibrium calculations using GASEQ. Results show that efficient combustion can be achieved with high power but at very narrow equivalence ratios using both hydrogen and methane blends. Moreover low concentrations of OH radicals are observed at high hydrogen content probably as a consequence of the high NH2 production.
Critical Parameters Controlling Wettability in Hydrogen Underground Storage - An Analytical Study
Sep 2022
Publication
Hypothesis.<br/>The large-scale implementation of hydrogen economy requires immense storage spaces to facilitate the periodic storage/production cycles. Extensive modelling of hydrogen transport in porous media is required to comprehend the hydrogen-induced complexities prior to storage to avoid energy loss. Wettability of hydrogen-brine-rock systems influence flow properties (e.g. capillary pressure and relative permeability curves) and the residual saturations which are all essential for subsurface hydrogen systems.<br/>Model.<br/>This study aims to understand which parameters critically control the contact angle for hydrogen-brine-rock systems using the surface force analysis following the DLVO theory and sensitivity analysis. Furthermore the effect of roughness is studied using the Cassie-Baxter model.<br/>Findings.<br/>Our results reveal no considerable difference between H2 and other gases such as N2. Besides the inclusion of roughness highly affects the observed apparent contact angles and even lead to water-repelling features. It was observed that contact angle does not vary significantly with variations of surface charge and density at high salinity which is representative for reservoir conditions. Based on the analysis it is speculated that the influence of roughness on contact angle becomes significant at low water saturation (i.e. high capillary pressure).
Future Energy Scenarios 2021
Jul 2022
Publication
Our Future Energy Scenarios (FES) draw on hundreds of experts’ views to model four credible energy pathways for Britain over coming decades. Matthew Wright our head of strategy and regulation outlines what the 2021 outlook means for consumers society and the energy system itself.<br/>This year’s Future Energy Scenarios insight reveals a glimpse of a Britain that is powered with net zero carbon emissions.<br/>Our analysis shows that our country can achieve its legally-binding carbon reduction targets: in three out of four scenarios in the analysis the country reaches net zero carbon emissions by 2050 with Leading the Way – our most ambitious scenario – achieving it in 2047 and becoming net negative by 2050.
Environmental-economic Sustainability of Hydrogen and Ammonia Fuels for Short Sea Shipping Operations
Jan 2024
Publication
Alternative fuels of low or zero carbon content can decarbonise the shipping operations. This study aims at assessing the lifetime environmental-economic sustainability of ammonia and hydrogen as alternatives to diesel fuel for short sea shipping cargo vessels. A model is employed to calculate key performance indicators representing the lifetime financial sustainability and environmental footprint of the case ship using a realistic operating profile and considering several scenarios with different diesel substitution rates. Scenarios meeting the carbon emissions reduction targets set by the International Maritime Organisation (IMO) for 2030 are identified whereas policy measures for their implementation including the emissions taxation are discussed. The derived results demonstrate that the future implementation of carbon emissions taxation in the ranges of 136–965 €/t for hydrogen and 356–2647 €/t for ammonia can support these fuels financial sustainability in shipping. This study provides insights for adopting zero-carbon fuels and as such impacts the de-risking of shipping decarbonisation.
The Socio-technical Dynamics of Net-zero Industrial Megaprojects: Outside-in and Inside-out Analyses of the Humber Industrial Cluster
Feb 2023
Publication
Although energy-intensive industries are often seen as ‘hard-to-decarbonise’ net-zero megaprojects for industrial clusters promise to improve the technical and economic feasibility of hydrogen fuel switching and carbon capture and storage (CCS). Mobilising insights from the megaproject literature this paper analyses the dynamics of an ambitious first-of-kind net-zero megaproject in the Humber industrial cluster in the United Kingdom which includes CCS and hydrogen infrastructure systems industrial fuel switching CO2 capture green and blue hydrogen production and hydrogen storage. To analyse the dynamics of this emerging megaproject the article uses a socio-technical system lens to focus on developments in technology actors and institutions. Synthesising multiple megaproject literature insights the paper develops a comprehensive framework that addresses both aggregate (‘outside-in’) developments and the endogenous (‘inside-out’) experiences and activities regarding three specific challenges: technical system integration actor coordination and institutional alignment. Drawing on an original dataset involving expert interviews (N = 46) site visits (N = 7) and document analysis the ‘outside-in’ analysis finds that the Humber megaproject has progressed rapidly from outline visions to specific technical designs enacted by new coalitions and driven by strengthening policy targets and financial support schemes. The complementary ‘inside-out’ analysis however also finds 12 alignment challenges that can delay or derail materialisation of the plans. While policies are essential aggregate drivers institutional misalignments presently also prevent project-actors from finalising design and investment decisions. Our analysis also finds important tensions between the project's high-pace delivery focus (to meet government targets) and allowing sufficient time for pilot projects learning-by-doing and design iterations.
Numerical Modelling of a Heavy-duty Diesel-hydrogen Dual-fuel Engine with Late High Pressure Hydrogen Direct Injection and Diesel Pilot
Sep 2023
Publication
Direct gaseous fuel injection in internal combustion engines is a potential strategy for improving in-cylinder combustion processes and performance while reducing emissions and increasing hydrogen energy share (HES). Through use of numerical modelling the current study explores combustion in a compression ignition engine utilising a late compression/early power stroke direct gaseous hydrogen injection ignited by a diesel pilot at up to 99% HES. The combustion process of hydrogen in this type of engine is mapped out and compared to that of the same engine using methane direct injection. Four distinct phases of combustion are found which differ from that of pure diesel operation. Interaction of the injected gas jet with the chamber walls is found to have a considerable impact on performance and emission characteristics and is a factor which needs to be explored in greater detail in future studies. Considerable performance increase and carbon-based emission reductions are identified at up to 99% HES at high load but low load performance greatly deteriorated when 95% HES was exceeded due to a much reduced diesel pilot struggling to ignite the main hydrogen injection.
Development of Hydrogen Area Classification Data for Use in Village Trials
May 2023
Publication
The natural gas industry proposes carrying out trials on limited parts of the gas network using hydrogen as an alternative to natural gas as a fuel. Ahead of these trials it is important to establish whether the zones of negligible extent that are typically applied to natural gas systems could still be considered zones of negligible extent for hydrogen. The standard IGEM/UP/16 is commonly used by the natural gas industry to carry out area classification for low pressure gas systems for example as found in boiler houses. However IGEM/UP/16 is not applicable to hydrogen. Therefore IGEM commissioned HSE’s Science Division to develop some data that could be used to feed into an area classification assessment for the village trials.<br/>This report identifies two main elements of IGEM/UP/16 which may not apply to hydrogen and suggests values for hydrogen-specific alternatives. These are the ventilation rate requirements to allow a zone to be deemed of negligible extent and the definition of a confined space.
Future Energy Scenarios 2018
Jul 2018
Publication
Welcome to our Future Energy Scenarios. These scenarios which stimulate debate and help inform the decisions that will shape our energy future have never been more important – especially when you consider the extent to which the energy landscape is being transformed.
Underground Hydrogen Storage: A UK Perspective
Oct 2023
Publication
Hydrogen is anticipated to play a key role in global decarbonization and within the UK’s pathway to achieving net zero targets. However as the production of hydrogen expands in line with government strategies a key concern is where this hydrogen will be stored for later use. This study assesses the different large-scale storage options in geological structures available to the UK and addresses the surrounding uncertainties moving towards establishing a hydrogen economy. Currently salt caverns look to be the most favourable option considering their proven experience in the storage of hydrogen especially high purity hydrogen natural sealing properties low cushion gas requirement and high charge and discharge rates. However their geographical availability within the UK can act as a major constraint. Additionally a substantial increase in the number of new caverns will be necessary to meet the UK’s storage demand. Salt caverns have greater applicability as a good short-term storage solution however storage in porous media such as depleted hydrocarbon reservoirs and saline aquifers can be seen as a long-term and strategic solution to meet energy demand and achieve energy security. Porous media storage solutions are estimated to have capacities which far exceed projected storage demand. Depleted fields have generally been well explored prior to hydrocarbon extraction. Although many saline aquifers are available offshore UK geological characterizations are still required to identify the right candidates for hydrogen storage. Currently the advantages of depleted gas reservoirs over saline aquifers make them the favoured option after salt caverns.
Price Promises, Trust Deficits and Energy Justice: Public Perceptions of Hydrogen Homes
Oct 2023
Publication
In an era characterised by political instability economic uncertainty and mounting environmental pressures hydrogen fuel is being positioned as a critical piece of the global energy security and clean energy agenda. The policy push is noteworthy in the United Kingdom where the government is targeting industrial decarbonisation via hydrogen while exploring a potential role for hydrogen-fuelled home appliances. Despite the imperative to secure social acceptance for accelerating the diffusion of low-carbon energy technologies public perceptions of hydrogen homes remain largely underexplored by the researcher community. In response this analysis draws on extensive focus group data to understand the multi-dimensional nature of social acceptance in the context of the domestic hydrogen transition. Through an integrated mixed-methods multigroup analysis the study demonstrates that socio-political and market acceptance are strongly interlinked owing to a trust deficit in the government and energy industry coupled to underlying dissatisfaction with energy markets. At the community level hydrogen homes are perceived as a potentially positive mechanism for industrial regeneration and local economic development. Households consider short-term disruptive impacts to be tolerable provided temporary disconnection from the gas grid does not exceed three days. However to strengthen social acceptance clearer communication is needed regarding the spatial dynamics and equity implications of the transition. The analysis concludes that existing trust deficits will need to be overcome which entails fulfilling not only a ‘price promise’ on the cost of hydrogen appliances but also enacting a ‘price pledge’ on energy bills. These deliverables are fundamental to securing social acceptance for hydrogen homes.
Divergent Consumer Preferences and Visions for Cooking and Heating Technologies in the United Kingdom: Make Our Homes Clean, Safe, Warm and Smart!
Aug 2023
Publication
Decarbonising the global housing stock is imperative for reaching climate change targets. In the United Kingdom hydrogen is currently being tested as a replacement fuel for natural gas which could be used to supply low-carbon energy to parts of the country. Transitioning the residential sector towards a net-zero future will call for an inclusive understanding of consumer preferences for emerging technologies. In response this paper explores consumer attitudes towards domestic cooking and heating technologies and energy appliances of the future which could include a role for hydrogen hobs and boilers in UK homes. To access qualitative evidence on this topic we conducted ten online focus groups (N = 58) with members of the UK public between February and April 2022. The study finds that existing gas users wish to preserve the best features of gas cooking such as speed responsiveness and controllability but also desire the potential safety and aesthetic benefits of electric systems principally induction hobs. Meanwhile future heating systems should ensure thermal comfort ease of use energy efficiency and smart performance while providing space savings and noise reduction alongside demonstrable green benefits. Mixed-methods multigroup analysis suggests divergence between support levels for hydrogen homes which implies a degree of consumer heterogeneity. Foremost we find that domestic hydrogen acceptance is positively associated with interest and engagement with renewable energy and fuel poverty pressures. We conclude that internalising the perspectives of consumers is critical to enabling constructive socio-technical imaginaries for low-carbon domestic energy futures.
Energy System Changes in 1.5 °C, Well Below 2 °C and 2 °C Scenarios
Dec 2018
Publication
Meeting the Paris Agreement's goal to limit global warming to well below 2 °C and pursuing efforts towards 1.5 °C is likely to require more rapid and fundamental energy system changes than the previously-agreed 2 °C target. Here we assess over 200 integrated assessment model scenarios which achieve 2 °C and well-below 2 °C targets drawn from the IPCC's fifth assessment report database combined with a set of 1.5 °C scenarios produced in recent years. We specifically assess differences in a range of near-term indicators describing CO2 emissions reductions pathways changes in primary energy and final energy across the economy's major sectors in addition to more detailed metrics around the use of carbon capture and storage (CCS) negative emissions low-carbon electricity and hydrogen.
Cryogenic Hydrogen Jet and Flame for Clean Energy Applications: Progress and Challenges
May 2023
Publication
Industries across the world are making the transition to net-zero carbon emissions as government policies and strategies are proposed to mitigate the impact of climate change on the planet. As a result the use of hydrogen as an energy source is becoming an increasingly popular field of research particularly in the aviation sector where an alternative green renewable fuel to the traditional hydrocarbon fuels such as kerosene is essential. Hydrogen can be stored in multiple ways including compressed gaseous hydrogen cryo-compressed hydrogen and cryogenic liquid hydrogen. The infrastructure and storage of hydrogen will play a pivotal role in the realisation of large-scale conversion from traditional fuels with safety being a key consideration. This paper provides a review on previous work undertaken to study the characterisation of both unignited and ignited hydrogen jets which are fundamental phenomena for the utilisation of hydrogen. This includes work that focuses on the near-field flow structure dispersion in the far-field ignition and flame characteristics with multi-physics. The safety considerations are also included. The theoretical models and computational fluid dynamics (CFD) multiphase and reactive flow approaches are discussed. Then an overview of previous experimental work is provided before focusing the review on the existing computational results with comparison to experiments. Upon completion of this review it is highlighted that the complex near-field physics and flow phenomena are areas lacking in research. The near-field flow properties and characteristics are of significant importance with respect to the ignition and combustion of hydrogen.
Life Cycle Assessment of an Autonomous Underwater Vehicle that Employs Hydrogen Fuel Cell
Aug 2023
Publication
In recent years there has been a significant increase in the adoption of autonomous vehicles for marine and submarine missions. The advancement of emerging imaging navigation and communication technologies has greatly expanded the range of operational capabilities and opportunities available. The ENDURUNS project is a European research endeavor focused on identifying strategies for achieving minimal environmental impact. To measure these facts this article evaluates the product impacts employing the Life Cycle Assessment methodology for the first time following the ISO 14040 standard. In this analysis the quantitative values of Damage and Environmental Impact using the Eco-Indicator 99 methodology in SimaPro software are presented. The results report that the main contributors in environmental impact terms have been placed during the manufacturing phase. Thus one of the challenges is accomplished avoiding the use phase emissions that are the focus to reduce nowadays in the marine industry.
Synergistic Integration of Hydrogen Energy Economy with UK’s Sustainable Development Goals: A Holistic Approach to Enhancing Safety and Risk Mitigation
Oct 2023
Publication
Hydrogen is gaining prominence as a sustainable energy source in the UK aligning with the country’s commitment to advancing sustainable development across diverse sectors. However a rigorous examination of the interplay between the hydrogen economy and the Sustainable Development Goals (SDGs) is imperative. This study addresses this imperative by comprehensively assessing the risks associated with hydrogen production storage transportation and utilization. The overarching aim is to establish a robust framework that ensures the secure deployment and operation of hydrogen-based technologies within the UK’s sustainable development trajectory. Considering the unique characteristics of the UK’s energy landscape infrastructure and policy framework this paper presents practical and viable recommendations to facilitate the safe and effective integration of hydrogen energy into the UK’s SDGs. To facilitate sophisticated decision making it proposes using an advanced Decision-Making Trial and Evaluation Laboratory (DEMATEL) tool incorporating regret theory and a 2-tuple spherical linguistic environment. This tool enables a nuanced decision-making process yielding actionable insights. The analysis reveals that Incident Reporting and Learning Robust Regulatory Framework Safety Standards and Codes are pivotal safety factors. At the same time Clean Energy Access Climate Action and Industry Innovation and Infrastructure are identified as the most influential SDGs. This information provides valuable guidance for policymakers industry stakeholders and regulators. It empowers them to make well-informed strategic decisions and prioritize actions that bolster safety and sustainable development as the UK transitions towards a hydrogen-based energy system. Moreover the findings underscore the varying degrees of prominence among different SDGs. Notably SDG 13 (Climate Action) exhibits relatively lower overall distinction at 0.0066 and a Relation value of 0.0512 albeit with a substantial impact. In contrast SDG 7 (Clean Energy Access) and SDG 9 (Industry Innovation and Infrastructure) demonstrate moderate prominence levels (0.0559 and 0.0498 respectively) each with its unique influence emphasizing their critical roles in the UK’s pursuit of a sustainable hydrogen-based energy future.
No more items...