Poland

Currently hydrogen and electric drives used in various means of transport is a leading topic in many respects. This article discusses the most important aspects of the operation of vehicles with electric drives (passenger cars) and hydrogen drives. In both cases the official reason for using both drives is the possibility of independence from fossil fuel supplies especially oil. The desire for independence is mainly dictated by political considerations. This article discusses the acquisition of basic raw materials for the construction of lithium-ion batteries in electric cars as well as methods for obtaining hydrogen as a fuel. The widespread use of electric passenger cars requires the construction of a network of charging stations. This article shows that taking into account the entire production process of electric cars including lithium-ion batteries the argument that they are ecological cannot be used. Additionally it was indicated that there is no concept for the use of used accumulator batteries. If hydrogen drives are used in trains there is no need to build the traction network infrastructure and then continuously monitor its technical condition and perform the necessary repairs. Of course the necessary hydrogen tanks must be built but there must be similar tanks to store oil for diesel locomotives. This paper also deals with other possibilities of hydrogen application for transformational usage e.g. the use of combustion engines driven with liquid hydrogen. Unfortunately an optimistic approach to this issue does not allow for a critical view of the whole matter. In public discussion there is no room for scientific arguments and emotions to dominate.

Ensuring the energy transition in order to decrease CO2 and volatile organic compounds emissions and improve the efficiency of energy processes requires the development of advanced materials and technologies for the electrical energy sector. The article reviews superconducting materials functional nanomaterials used in the power industry mainly due to their magnetic electrical optical and dielectric properties and the thin layers of amorphous carbon nitride which properties make them an important material from the point of view of environmental protection optoelectronic photovoltaic and energy storage. The superconductivity-based technologies material processing and thermal and nonthermal plasma generation have been reviewed as technologies that can be a solution to chosen problems in the electrical energy sector and environment. The study explains directly both—the basics and application potential of low and high-temperature superconductors as well as peculiarities of the related manufacturing technologies for Roebel cables 1G and 2G HTS tapes and superconductor coil systems. Among the superconducting materials particular attention was paid to the magnesium di-boride MgB2 and its potential applications in the power industry. The benefits of the use of carbon films with amorphous structures in electronics sensing technologies solar cells FETs and memory devices were discussed. The article provides the information about most interesting from the R&D point of view groups of materials for PV applications. It summarises the advantages and disadvantages of their use regarding commercial requirements such as efficiency lifetime light absorption impact on the environment costs of production and weather dependency. Silicon processing inkjet printing vacuum deposition and evaporation technologies that allow obtaining improved and strengthened materials for solar cell manufacturing are also described. In the case of the widely developed plasma generation field waste-to-hydrogen technology including both thermal and non-thermal plasma techniques has been discussed. The review aims to draw attention to the problems faced by the modern power industry and to encourage research in this area because many of these problems can only be solved within the framework of interdisciplinary and international cooperation.

The novelty of the paper is the analysis of the possibilities of reducing the operating costs of a mine water pumping station in an abandoned coal mine. To meet the energy needs of the pumping station and reduce the carbon footprint “green” energy from a photovoltaic farm was used. Surplus green energy generated during peak production is stored in the form of green hydrogen from the water electrolysis process. Rainwater and process water are still underutilized sources for increasing water resources and reducing water stress in the European Union. The article presents the possibilities of using these waters after purification in the production of green hydrogen by electrolysis. The article also presents three variants that ensure the energy self-sufficiency of the proposed concepts of operation of the pumping station.

The energy approach for determining the durability of structural elements at high temperature creep and hydrogen activity was proposed. It has been shown that the approach significantly simplifies research compared with the known ones. Approbation of the approach was carried out on the example of determining the indicators of durability of the Bridgman sample under conditions of creep and different levels of hydrogenation of the metal. It was shown that with an increase of hydrogen concentration in the metal from 2 to 10 ppm the durability of the test sample decreased from 22 to 58%.

The recent advances on the effects of microstructural refinement and various nano-catalytic additives on the hydrogen storage properties of metal and complex hydrides obtained in the last few years in the allied laboratories at the University of Waterloo (Canada) and Military University of Technology (Warsaw Poland) are critically reviewed in this paper. The research results indicate that microstructural refinement (particle and grain size) induced by ball milling influences quite modestly the hydrogen storage properties of simple metal and complex metal hydrides. On the other hand the addition of nanometric elemental metals acting as potent catalysts and/or metal halide catalytic precursors brings about profound improvements in the hydrogen absorption/desorption kinetics for simple metal and complex metal hydrides alike. In general catalytic precursors react with the hydride matrix forming a metal salt and free nanometric or amorphous elemental metals/intermetallics which in turn act catalytically. However these catalysts change only kinetic properties i.e. the hydrogen absorption/desorption rate but they do not change thermodynamics (e.g. enthalpy change of hydrogen sorption reactions). It is shown that a complex metal hydride LiAlH4 after high energy ball milling with a nanometric Ni metal catalyst and/or MnCl2 catalytic precursor is able to desorb relatively large quantities of hydrogen at RT 40 and 80 °C. This kind of behavior is very encouraging for the future development of solid state hydrogen systems.

The influence of the addition of refractory metals (molybdenum and tantalum) on the hydrogenation properties of FeTi intermetallic phase-based alloys was investigated. The suspended droplet alloying technique was applied to fabricate FeTiTa-based and FeTiMo-based alloys. The phase composition and hydrogen storage properties of the samples were investigated. The samples modified with the refractory metals exhibited lower plateau pressures and lower hydrogen storage capacities than those of the FeTi reference sample due to solid solution formation. It was observed that the equilibrium pressures decreased with the amount of molybdenum which is in good agreement with the increase in the cell parameters of the TiFe phase. Suspended droplet alloying was found to be a practical method to fabricate alloys with refractory metal additions; however it is appropriate for screening samples with desired chemical and phase compositions rather than for manufacturing purposes.

The purpose of this work is the literature review in the field of hydrogen storage in solid sorbents. The best solid sorbents for hydrogen storage were selected with the possibility of synthesis them from coal fly ash. In addition the on-board hydrogen storage analysis was carried out. The review method consists of two parts. The first part based on research questions included types of the best sorbents for hydrogen storage the possibility to obtain them from coal fly ash and practical use in hydrogen storage system on-board. The second part was the selection of publications from The Web of Science and Elsevier Scopus databases and the analysis as well as available reports on the websites at this scope. After searching the relevant articles in the databases abstracts were analysed in terms of the questions asked. The links between references and research were checked. The search procedure was repeated several times. Finally articles with high Impact Factor index published by authors recognized on a global scale were selected for the presented review. The collected information proved that carbon materials are suited to hydrogen storage because of their high porosity large specific surface area and thermal stability. Besides solid sorbents such as zeolites metal-organic frameworks activated carbons or zeolite template carbons can be obtained from coal fly ash. Thanks to silicon aluminium and unburned carbon content fly ash is a good material for the synthesis of hydrogen sorbents. Under cryogenic conditions and high pressure it is possible to adsorb as much as 8.5 wt% of hydrogen. Although the Department of Energy (DOE) requirements for the hydrogen storage system on-board vehicles are not met the review of scientific publications shows that research in this area is developing and better parameters are being obtained.

Underground storage is a method of storing large amounts of renewable energy that can be converted into hydrogen. One of the fundamental problems associated with this process concerns determining the timing and amount of injected gas in the first filling period for the operation of an underground storage facility. Ascertaining the hydrogen flow rate is essential to ensure that the capillary and fracturing pressures are not exceeded. The value of the flow rate was assessed by modelling the injection of hydrogen into a deep aquifer. The best initial H2 injection period was found to be five months. The volume of the cushion gas and the total storage capacity expanded with the extension of the first filling period length. The working capacity grew as the depth increased reaching maximum values at depths of approximately 1200e1400 m. This depth was considered optimal for storing hydrogen in the analysed structure.

This paper presents a method for refining the forecast schedule of renewable energy sources (RES) generation by its intraday adjustment and investigates the measures for reserving RES with unstable generation in electric power systems (EPSs). Owing to the dependence of electricity generation by solar and wind power plants (PV and WPPs respectively) on natural conditions problems arise with their contribution to the process of balancing the power system. Therefore the EPS is obliged to keep a power reserve to compensate for deviations in RES from the planned generation amount. A system-wide reserve (mainly the shunting capacity of thermal and hydroelectric power plants) is used first followed by other means of power reserve: electrochemical hydrogen or biogas plants. To analyze the technical and economic efficiency of certain backup means mathematical models based on the theory of similarity and the criterion method were developed. This method is preferred because it provides the ability to compare different methods of backing up RES generation with each other assess their proportionality and determine the sensitivity of costs to the capacity of backup methods with minimal available initial information. Criterion models have been formed that allow us to build dependencies of the costs of backup means for unstable RES generation on the capacity of the backup means. It is shown that according to the results of the analysis of various methods and means of RES backup hydrogen technologies are relatively the most effective. The results of the analysis in relative units can be clarified if the current and near-term price indicators are known.

National Implementation Plans (NIP) in regard hydrogenation motor transport are in place in European Union (EU) countries e.g.Germany France or Belgium Denmark Netherlands. Motor transport hydrogenization plans exist in the Japan and USA. In Poland the methodology deployment Hydrogen Refuelling Stations (HRS) developed in Motor Transport Institute is of multi-stage character are as follows: Stage I: Method allowing to identify regions in which HRS should be located. Stage II: Method allowing to identify urban centres in which should be located the said stations. Stage III: Method for determining the area of the station location. The presentation of the aforesaid NIPS and based on that and the mentioned methodology the conditions for hydrogenization of motor transport in Poland is the purpose of this article which constitutes its novelty. The scope of the article concerns the hydrogenization of motor transport in the abovementioned countries. With the above criteria the order the construction in Poland of a HRS in the order of their creation along the TEN-T corridors is as follows: 1 - Poznan 2 - Warsaw 3 - Bialystok 4 - Szczecin 5 - the Lodz region 6 - the Tri-City region 7 - Wrocław 8 - the Katowice region 9 – Krakow. The concluding discussion sets out the status of deployment HRS and FCEVs in the analysed countries.