Publications

Utilizing biological processes for hydrogen production via gasification is a promising alternative method to coal gasification. The present study proposes a dynamic simulation model that uses a one-dimensional heat-transfer analysis method to simulate a biohydrogen production system. The proposed model is based on an existing experimental design setup. It is used to simulate a biohydrogen production system driven by the waste heat from an integrated gasification combined cycle (IGCC) power plant equipped with carbon capture and storage technologies. The data from the simulated results are compared with the experimental measurement data to validate the developed model’s reliability. The results show good agreement between the experimental data and the developed model. The relative root-mean-square error for the heat storage feed-mixing and bioreactor tanks is 1.26% 3.59% and 1.78% respectively. After the developed model’s reliability is confirmed it is used to simulate and optimize the biohydrogen production system inside the IGCC power plant. The bioreactor tank’s time constant can be improved when reducing the operating volume of the feed-mixing tank by the scale factors of 0.75 and 0.50 leading to a 15.76% and 31.54% faster time constant respectively when compared with the existing design.

Decarbonising the global housing stock is imperative for reaching climate change targets. In the United Kingdom hydrogen is currently being tested as a replacement fuel for natural gas which could be used to supply low-carbon energy to parts of the country. Transitioning the residential sector towards a net-zero future will call for an inclusive understanding of consumer preferences for emerging technologies. In response this paper explores consumer attitudes towards domestic cooking and heating technologies and energy appliances of the future which could include a role for hydrogen hobs and boilers in UK homes. To access qualitative evidence on this topic we conducted ten online focus groups (N = 58) with members of the UK public between February and April 2022. The study finds that existing gas users wish to preserve the best features of gas cooking such as speed responsiveness and controllability but also desire the potential safety and aesthetic benefits of electric systems principally induction hobs. Meanwhile future heating systems should ensure thermal comfort ease of use energy efficiency and smart performance while providing space savings and noise reduction alongside demonstrable green benefits. Mixed-methods multigroup analysis suggests divergence between support levels for hydrogen homes which implies a degree of consumer heterogeneity. Foremost we find that domestic hydrogen acceptance is positively associated with interest and engagement with renewable energy and fuel poverty pressures. We conclude that internalising the perspectives of consumers is critical to enabling constructive socio-technical imaginaries for low-carbon domestic energy futures.

A huge amount of organic waste is generated annually around the globe. The main sources of solid and liquid organic waste are municipalities and canning and food industries. Most of it is disposed of in an environmentally unfriendly way since none of the modern recycling technologies can cope with such immense volumes of waste. Microbiological and biotechnological approaches are extremely promising for solving this environmental problem. Moreover organic waste can serve as the substrate to obtain alternative energy such as biohydrogen (H2 ) and biomethane (CH4 ). This work aimed to design and test new technology for the degradation of food waste coupled with biohydrogen and biomethane production as well as liquid organic leachate purification. The effective treatment of waste was achieved due to the application of the specific granular microbial preparation. Microbiological and physicochemical methods were used to measure the fermentation parameters. As a result a four-module direct flow installation efficiently couples spatial succession of anaerobic and aerobic bacteria with other micro- and macroorganisms to simultaneously recycle organic waste remediate the resulting leachate and generate biogas.

This paper presents a review of system design and analysis control strategy optimization and heat and mass integration of integrated solid oxide fuel cell (SOFC) and reciprocating internal combustion engine (ICE) system. Facing the future power-fuel-power path both SOFC and ICE can adapt to a variety of fuels which is one evidence that ICE is amenable to integration with SOFC while SOFC is more efficient cleaner and quieter than ICE. Different system topologies are classified whose dynamic performances are also analyzed. In addition the heat and mass integration of system is discussed. Moreover the combustion modes of ICE which can be applied to steady combustion high efficiency and low emissions are analyzed and compared. Meanwhile the potential and methods of system waste heat recovery are discussed. The exergy analysis energy density and techno-economy are discussed. Finally the results are discussed in the last section with the final conclusion that SOFC-ICE systems are very suitable for long-distance transportation such as maritime and aviation which can also solve problems of the carbon and pollutant emissions with the background of engine cannot be replaced in maritime while the system can adapt a variety of alternative fuels.

To cope with climate change emerging fuels- hydrogen ammonia and methanol- have been proposed as promising energy carriers that will replace part of the liquefied natural gas (LNG) in future maritime scenarios. Energy efficiency is an important indicator for evaluating the system but the maritime supply system for emerging fuels has yet to be revealed. In this study the energy efficiency of the maritime supply chain of hydrogen ammonia methanol and natural gas is investigated considering processes including production storage loading transport and unloading. A sensitivity analysis of parameters such as ambient temperature storage time pipeline length and sailing time is also carried out. The results show that hydrogen (2.366%) has the highest daily boil-off gas (BOG) rate and wastes more energy than LNG (0.413%) with ammonia and methanol both being lower than LNG. The recycling of BOG is of great importance to the hydrogen supply chain. When produced from renewable energy sources methanol (98.02%) is the most energy efficient followed by ammonia with hydrogen being the least (89.10%). This assessment shows from an energy efficiency perspective that ammonia and methanol have the potential to replace LNG as the energy carrier of the future and that hydrogen requires efficient BOG handling systems to increase competitiveness. This study provides some inspirations for the design of global maritime supply systems for emerging fuels.

Green hydrogen is expected to be traded globally in future greenhouse gas neutral energy systems. However there is still a lack of temporally- and spatially-explicit cost-potentials for green hydrogen considering the full process chain which are necessary for creating effective global strategies. Therefore this study provides such detailed cost-potentialcurves for 28 selected countries worldwide until 2050 using an optimizing energy systems approach based on open-field photovoltaics (PV) and onshore wind. The results reveal huge hydrogen potentials (>1500 PWhLHV/a) and 79 PWhLHV/a at costs below 2.30 EUR/kg in 2050 dominated by solar-rich countries in Africa and the Middle East. Decentralized PVbased hydrogen production even in wind-rich countries is always preferred. Supplying sustainable water for hydrogen production is needed while having minor impact on hydrogen cost. Additional costs for imports from democratic regions are only total 7% higher. Hence such regions could boost the geostrategic security of supply for greenhouse gas neutral energy systems.

Green energy is at the forefront of current policy research and engineering but some of the potential fuels require either a lot of deeper research or a lot of infrastructure before they can be implemented. In the case of hydrogen both are true. This report aims to analyse the potential of hydrogen as a future fuel source by performing a life-cycle assessment. Through this the well-to-tank phase of fuel production and the usage phase of the system have been analysed. Models have also been created for traditional fuel systems to best compare results. The results show that hydrogen has great potential to convert marine transport to operating off green fuels when powered through low-carbon energy sources which could reduce a huge percentage of the international community’s greenhouse gas emissions. Hydrogen produced through wind powered alkaline electrolysis produced emission data 5.25 g of CO2 equivalent per MJ compared to the 210 g per MJ produced by a medium efficiency diesel equivalent system a result 40 times larger. However with current infrastructure in most countries not utilising a great amount of green energy production the effects of hydrogen usage could be more dangerous than current fuel sources owing to the incredible energy requirements of hydrogen production with even grid (UK) powered electrolysis producing an emission level of 284 g per MJ which is an increase against standard diesel systems. From this the research concludes that without global infrastructure change hydrogen will remain as a potential fuel rather than a common one.

Climate change and the pressure to decarbonize as well as energy security concerns have drawn the attention of policymakers and the industry to hydrogen energy. To advance the hydrogen economy at a global scale research and innovation progress is of significant importance among others. However previous studies have provided only limited quantitative evidence of the effects of research and innovation on the formation of a global hydrogen market. Instead they postulate rather than empirically support this relationship. Therefore this study analyzes the effects of research and innovation measured by scientific publications patents and standards on bilateral hydrogen trade flows for 32 countries between 1995 and 2019 in a gravity model of trade using regression analyses and Poisson Pseudo Maximum Likelihood (PPML) estimation. The main results of the PPML estimation show that research and innovation progress is indeed associated with increased trade especially with patenting and (international) standardization enhancing hydrogen export volumes. As policy implications we derive that increased public R&D funding can help increase the competitiveness of hydrogen energy and boost market growth along with infrastructure support and harmonized standards and regulations.

To reach the decarbonisation goals a zero CO2 emissions large ship propulsion system is proposed in this work. The ship selected is a large ferry propelled by an internal combustion engine fuelled by an ammonia-hydrogen blend. The only fuel loaded in the vessel will be ammonia. The hydrogen required for the combustion in the engine will be produced onboard employing ammonia decomposition. The heat required for this decomposition section will be supplied by using the hot flue gases of the combustion engine. To address the issues regarding NOx emissions a selective catalytic reduction (SCR) reactor was designed. The main operating variables for all the equipment were computed for engine load values of 25% 50% 75% and 100%. Considering the lowest SCR removal rate (91% at an engine load of 100%) the NOx emissions of the vessel were less than 0.5 g/kWh lower than the IMO requirements. An energy analysis of the system proposed to transform ammonia into energy for shipping was conducted. The global energy and exergy efficiencies were 42.4% and 48.1%. In addition an economic analysis of the system was performed. The total capital cost (CAPEX) for the system can be estimated at 8.66 M€ (784 €/kW) while the operating cost (OPEX) ranges between 210 €/MWh (engine load 100%) and 243 €/MWh (engine load of 25%). Finally a sensitivity analysis for the price of ammonia was performed resulting in the feasibility of reducing the operating cost to below 150 €/MWh in the near horizon.

This article analyzes the processes of compressing hydrogen in the gaseous state an aspect considered important due to its contribution to the greater diffusion of hydrogen in both the civil and industrial sectors. This article begins by providing a concise overview and comparison of diverse hydrogen-storage methodologies laying the groundwork with an in-depth analysis of hydrogen’s thermophysical properties. It scrutinizes plausible configurations for hydrogen compression aiming to strike a delicate balance between energy consumption derived from the fuel itself and the requisite number of compression stages. Notably to render hydrogen storage competitive in terms of volume pressures of at least 350 bar are deemed essential albeit at an energy cost amounting to approximately 10% of the fuel’s calorific value. Multi-stage compression emerges as a crucial strategy not solely for energy efficiency but also to curtail temperature rises with an upper limit set at 200 ◦C. This nuanced approach is underlined by the exploration of compression levels commonly cited in the literature particularly 350 bar and 700 bar. The study advocates for a three-stage compression system as a pragmatic compromise capable of achieving high-pressure solutions while keeping compression work below 10 MJ/kg a threshold indicative of sustainable energy utilization.