Publications

As the world looks to recover from the impact of coronavirus on our lives livelihoods and economies we have the chance to build back better: to invest in making the UK a global leader in green technologies.

The plan focuses on increasing ambition in the following areas:

• advancing offshore wind
• driving the growth of low carbon hydrogen
• delivering new and advanced nuclear power
• accelerating the shift to zero emission vehicles
• green public transport cycling and walking
• ‘jet zero’ and green ships
• greener buildings
• investing in carbon capture usage and storage
• protecting our natural environment
• green finance and innovation

The ten point plan will mobilise £12 billion of government investment and potentially 3 times as much from the private sector to create and support up to 250000 green jobs.

In a scenario characterized by an increasing penetration of non-dispatchable renewable energy sources and the need of fast-ramping grid-balancing power plants the EU project GRASSHOPPER aims to setup and demonstrate a highly flexible PEMFC Power Plant hydrogen fueled and scalable to MW-size designed to provide grid support.<br/>In this work different layouts proposed for the innovative MW-scale plant are simulated to optimize design and off-design operation. The simulation model details the main BoP components performances and includes a customized PEMFC model validated through dedicated experiments.<br/>The system may operate at atmospheric or mild pressurized conditions: pressurization to 0.7 barg allows significantly higher net system efficiency despite the increasing BoP consumptions. The additional energy recovery from the cathode exhaust with an expander gives higher net power and net efficiency adding up to 2%pt and reaching values between 47%LHV and 55%LHV for currents between 100% and 20% of the nominal value.

This paper has experimentally proved that hydrogen accumulates in large quantities in metal-ceramic and pocket electrodes of alkaline batteries during their operation. Hydrogen accumulates in the electrodes in an atomic form. After the release of hydrogen from the electrodes a powerful exothermic reaction of atomic hydrogen recombination with a large energy release occurs. This exothermic reaction is the cause of thermal runaway in alkaline batteries. For the KSL-15 battery the gravimetric capacity of sintered nickel matrix of the oxide-nickel electrode as hydrogen storage is 20.2 wt% and cadmium electrode is 11.5 wt%. The stored energy density in the metal-ceramic matrix of the oxide-nickel electrode of the battery KSL-15 is 44 kJ/g and in the cadmium electrode it is 25 kJ/g. The similar values for the KPL-14 battery are as follows. The gravimetric capacity of the active substance of the pocket oxide-nickel electrode as a hydrogen storage is 22 wt% and the cadmium electrode is 16.9 wt%. The density of the stored energy in the active substance oxide-nickel electrode is 48 kJ/g and in the active substance of the cadmium electrode it is 36.8 kJ/g. The obtained results of the accumulation of hydrogen energy in the electrodes by the electrochemical method are three times higher than any previously obtained results using the traditional thermochemical method.

The study focuses on the aspect of using the structure of gasars i.e. materials with directed open porosity as a potential hydrogen storage. The structure of the tested gasar is composed of a large number of thin open tubular pores running through the entire longitudinal section of the sample. This allows hydrogen to easily penetrate into the entire sample volume. The analysis of pore distribution showed that the longest diffusion path needed for full penetration of the metal structure with hydrogen is about L = 50–70 μm regardless of the external dimensions of the sample. Attempts to hydrogenate the magnesium gasar structure have shown its ability to accumulate hydrogen at a level of 1 wt%. The obtained results were compared with the best result was obtained for the ZK60 alloy after equal channel angular pressing (ECAP) and crushed to a powder form. The result obtained exceeded 4 wt% of hydrogen accumulated in the metal structure at theoretical 6.9 wt% maximum capacity. A model analysis of the theoretic absorption capacity of pure magnesium was also carried out based on the concentration of vacancies in the metal structure. The theoretical results obtained correlate well with experimental data.

Improving energy system modelling capabilities can directly affect the quality of applied studies. However some modelling trade-offs are necessary as the computational capacity and data availability are constrained. In this paper we demonstrate modelling trade-offs resulting from the modification in the resolution of four modelling capabilities namely transitional scope European electricity interconnection hourly demand-side flexibility description and infrastructure representation. We measure the cost of increasing resolution in each capability in terms of computational time and several energy system modelling indicators notably system costs emission prices and electricity import and export levels. The analyses are performed in a national-level integrated energy system model with a linear programming approach that includes the hourly electricity dispatch with European nodes. We determined that reducing the transitional scope from seven to two periods can reduce the computational time by 75% while underestimating the objective function by only 4.6%. Modelers can assume a single European Union node that dispatches electricity at an aggregated level which underestimates the objective function by 1% while halving the computational time. Furthermore the absence of shedding and storage flexibility options can increase the curtailed electricity by 25% and 8% respectively. Although neglecting flexibility options can drastically decrease the computational time it can increase the sub-optimality by 31%. We conclude that an increased resolution in modelling flexibility options can significantly improve the results. While reducing the computational time by half the lack of electricity and gas infrastructure representation can underestimate the objective function by 4% and 6% respectively.

In order to achieve gradual but timely decarbonisation of the transport sector it is essential to evaluate which types of vehicles provide a suitable environmental performance while allowing the use of hydrogen as a fuel. This work compares the environmental life-cycle performance of three different passenger cars fuelled by hydrogen: a fuel cell electric vehicle an internal combustion engine car and a hybrid electric vehicle. Besides two vehicles that use hydrogen in a mixture with natural gas or gasoline were considered. In all cases hydrogen produced by wind power electrolysis was assumed. The resultant life-cycle profiles were benchmarked against those of a compressed natural gas car and a hybrid electric vehicle fed with natural gas. Vehicle infrastructure was identified as the main source of environmental burdens. Nevertheless the three pure hydrogen vehicles were all found to be excellent decarbonisation solutions whereas vehicles that use hydrogen mixed with natural gas or gasoline represent good opportunities to encourage the use of hydrogen in the short term while reducing emissions compared to ordinary vehicles.

Feeding IC engines with hydrogen‐rich syngas as an admixture to hydrocarbon fuels can decrease pollutant emissions particularly NOx. It offers a potential technique for low‐environmen‐ tal impact hydrocarbon fuel use in automotive applications. However hydrogen‐rich reformate gas (syngas) production via fuel reforming still needs more research and optimization. In this paper we describe the effect of a plasma torch assembly design on syngas yield and composition during plasma‐assisted reforming of gasoline. Additionally erosion resistance of the cathode‐emitting ma‐ terial under the conditions of gasoline reforming was studied using hafnium metal and lanthanated tungsten alloy. The gasoline reforming was performed with a noncatalytic nonthermal low‐current plasma system in the conditions of partial oxidation in an air and steam mixture. To find the most efficient plasma torch assembly configuration in terms of hydrogen production yield four types of anode design were tested i.e. two types of the swirl ring and two cathode materials while varying the inlet air and fuel flow rates. The experimental results showed that hydrogen was the highest proportion of the produced syngas. The smooth funnel shape anode design in Ring 1 at air/fuel flow rates of 24/4 27/4.5 and 30/5 g/min respectively was more effective than the edged funnel shape. Lanthanated tungsten alloy displayed higher erosion resistance than hafnium metal.

In order to mitigate the degradation and prolong the lifetime of polymer electrolyte membrane fuel cells advanced model-based control strategies are becoming indispensable. Thereby the availability of accurate yet computationally efficient fuel cell models is of crucial importance. Associated with this is the need to efficiently parameterize a given model to a concise and cost-effective experimental data set. A challenging task due to the large number of unknown parameters and the resulting complex optimization problem. In this work a parameterization scheme based on the simultaneous estimation of multiple structured state space models obtained by analytic linearization of a candidate fuel cell stack model is proposed. These local linear models have the advantage of high computational efficiency regaining the desired flexibility required for the typically iterative task of model parameterization. Due to the analytic derivation of the local linear models the relation to the original parameters of the non-linear model is retained. Furthermore the local linear models enable a straight-forward parameter significance and identifiability analysis with respect to experimental data. The proposed method is demonstrated using experimental data from a 30 kW commercial polymer electrolyte membrane fuel cell stack.

In recent years various studies have put forward the prospect of relying on low-carbon or renewable gases such as green hydrogen (H2) or biomethane to replace the supply of natural gas. Hydrogen in particular is receiving much attention as a versatile energy carrier that could complement direct electrification in a plethora of end-uses and questions over its production and deployment play an important part in the ongoing discussions around the energy chapters of the European Commission’s Green Deal agenda.

The aim of the short study was to assess the technical feasibility emission savings and cost impacts of the addition of hydrogen to the existing gas transport network the so-called practice of “hydrogen blending” which is currently being discussed as a deployment pathway in the context of the review of the EU Gas Market Regulation (GMR) and the Trans-European Networks for Energy (TEN-E) regulation.

The document can be downloaded from their website

Northern Ireland has achieved its 2020 targets in the electricity sector ahead of time with 46.8% of its electricity demand supplied by renewable generators. When it comes to heat the progress is less impressive – 68% of domestic heating is provided by oil and only around 2500 customers use low carbon heat generators in their homes. In addition 22% of consumers live in fuel poverty. Fuel poverty support programmes still propose the replacement of old oil boilers with new models or with gas boilers where a connection to the grid is possible.<br/>Failure of the commercial RHI scheme and the knock-on effect of the closure of the domestic RHI scheme caused significant damage to the industry and to the reputation of low carbon heat technologies leaving NI consumers without any explicit supporting mechanisms for low carbon heat supply. Decreases in carbon emissions from the heat sector are mainly achieved through switching from oil to gas heating. Gas infrastructure is under development in NI and promises to reach 60% of customers by 2022.