Publications

This report provides you with the information you need if you have plans to interact with or connect to our gas networks. Our vision is to set the standards that all of our customers love and others aspire to. This means that our long-term plans are shaped by our customers and stakeholders. This annual publication is an important opportunity to share our latest long-term plan and our strategic thinking and seek feedback so we can continue to adapt our activities going forward. We want to make it as easy and efficient as possible for you to interact with us.

​Cadent Long Term Development Plan 2019​​​

The iron and steel industry accounts for one third of global industrial CO2 emissions putting pressure on the industry to shift towards more sustainable modes of production. However for an industry characterised by path dependency and technological lock-ins sustainability transitions are not straightforward. In this study we aim to explore the potential pathways for sustainability transitions in the iron and steel industry. To do so we have conducted a case study in Sweden where there are policy and industry commitments towards fossil-free steel production. Our theoretical points of departure are the technological innovation system (TIS) approach and the multi-level perspective (MLP) and our paper presents the dynamics behind an emerging case of transition towards a hydrogen-based future. The paper has two major contributions to the literature on sustainability transitions. First it attempts to borrow some concepts from the MLP and integrate them with the TIS approach. Second it empirically presents an in-depth case study of the iron and steel industry e an understudied context in the field of sustainability transitions. By doing so it sheds some light on the dynamics between an emerging TIS and potential transition pathways of a regime.

Hydrogen is increasingly being viewed as a significant fuel for future industrial processes as it offers pathways to zero emission. The UK sees hydrogen as one of a handful of low-carbon solutions for transition to net zero. Currently most hydrogen production is from steam reforming of natural gas or coal gasification both of which involve the release of carbon dioxide. Hydrogen production from mini decentralised grids via a thermochemical process coupled with electricity production could offer favourable economics for small modular reactors (SMRs) whereby demand or grid management as a solution would include redirecting the power for hydrogen production when electricity demand is low. It also offers a clean-energy alternative to the aforementioned means. SMRs could offer favourable economics due to their flexible power system as part of the dual-output function. This study objective is to investigate the critical performance parameters associated with the nuclear power plant (NPP) the cycle working fluids and control-system design for switching between electricity and hydrogen demand to support delivery as part of a mini grid system for a reactor power delivering up to approximately 600 MWth power. The novelty of the work is in the holistic parametric analysis undertaken using a novel in-house tool which analyses the NPP using different working fluids with a control function bolt-on at the offtake for hydrogen production. The results indicate that the flow conditions at the offtake can be maintained. The choice of working fluids affects the pressure component. However the recuperator and heat-exchanger effectiveness are considered as efficiency-limiting factors for hydrogen production and electricity generation. As such the benefit of high-technology heat exchangers cannot be underestimated. This is also true when deciding on the thermochemical process to bolt onto the plant. The temperature of the gas at the end of the pipeline should also be considered to ensure that the minimum temperature-requirement status for hydrogen production is me

On this weeks episode the team are talking all things hydrogen with Sebastian-Justus Schmidt Chairman of Enapter and Thomas Chrometzka Head of Strategy at Enapter. On the show we discuss Enapter’s Anion Exchange Membrane (AEM) electrolyser and why Enapter believe that their modular electrolyser approach will revolutionise the cost of green hydrogen. We also discuss the wide array of use cases and sectors that Enapter are already working with to provide their solution as well as their view on where the current barriers exist for the hydrogen market. All this and more on the show!

The podcast can be found on their website

Commercialization of proton exchange membrane fuel cells can only materials provided its performance is closely related to existing technologies useful in commercial application. Other critical parameters like the utilization of cheaper materials should be taken into account during the manufacturing of the cell. A key component in the cell that has direct correlation to the cell perfor‐ mance is the flow plate. The weight coupled with cost of the cell revolves around the flow plate used in the manufacturing of the cell. This study explores materials ideal for the manufacturing of fuel cells in order to improve the overall cell performance. The investigation highlights the critical impact of varying materials used in the manufacturing of flow plates for PEM fuel cells. Stainless steel (SS) aluminium (Al) and copper (Cu) were the materials considered. The flow plate designs considered were serpentine and open pore cellular foam channel. Machine learning using python for the validation of the results with Linear regression Ridge regression and Polynomial regression algorithm was carried out. The performance of both flow field channels was compared using dif‐ ferent bipolar plate materials. The results show that metal foam flow channels overall performance was better than serpentine flow channels with all the various bipolar plate material used and Al material outperformed Cu and SS material. There is a direct correlation in terms of the outcome of the study and literature based on the data generated experimentally. It can however be concluded that molecules of hydrogen are stable on aluminium plates compared to copper and stainless steel

This study introduces a machine learning approach to predict the effect of alloying elements and test conditions on the hydrogen environment embrittlement (HEE) index of austenitic steels for the first time. The correlation between input features and the HEE index was analyzed with Pearson's correlation coefficient (PCC) and Maximum Information Coefficient (MIC) algorithms. The correlation analysis results identified Ni and Mo as dominant features influencing the HEE index of austenitic steels. Based on the analysis results the performance of the four representative machine learning models as a function of the number of top-ranked features was evaluated: random forest (RF) linear regression (LR) Bayesian ridge (BR) and support vector machine (SVM). Regardless of the type and the number of top-ranking features the RF model had the highest accuracy among various models. The machine learning-based approach is expected to be useful in designing new steels having mechanical properties required for hydrogen applications.

We spend a lot of time on the show talking about the interesting use cases and potential applications of hydrogen technologies as a means to decarbonize high-emissions sectors and that is the point! However moving hydrogen around the world (e.g. to remote areas without the capacity to produce it locally) presents a number of complexities and challenges that are unique to hydrogen itself or for which there are no traditionally established technologies to do so. On this episode the EAH team has a fascinating chat with Dr. Daniel Teichmann CEO and founder of Hydrogenious to learn more about liquid organic hydrogen carriers (LOHCs) and how they can help companies overcome some of the major hurdles that moving hydrogen around the globe presents.

The podcast can be found on their website

Type IV hydrogen storage tanks play an important role in hydrogen fuel cell vehicles (HFCVs) due to their superiority of lightweight good corrosion and fatigue resistance. It is planned to be used between -40℃ and 85℃ at which the polymer liner may have a degradation of mechanical properties and buckling collapse. This demand a good performance of liner materials in that temperature range. In this article the temperature effect on mechanical properties of polyamide 6 (PA6) liner material including specimens with weld seam was investigated via the stress-strain curve (S-S curve) macroscopic and microscopic morphology. Considering that the mechanical properties will change after the liner molding process this test takes samples directly from the liner. Results show that the tensile strength and tensile modulus increased by 2.46 times and 10.6 times respectively with the decrease of temperature especially in the range from 50℃ to -90℃. For the elongation at break and work of fracture they do not monotonously increase with the temperature up. Both of them reduce when the temperature rises from 20°C to 50°C especially for the work of fracture decreasing by 63%. The weld seam weakens the mechanical properties and the elongation at break and work of fracture are more obvious which are greater than 40% at each temperature. In addition the SEM images indicate that the morphology of fracture surface at -90°C is different from that at other temperatures which is a sufficient evidence of toughness reducing in low temperature.

Introducing CO2 electrochemical conversion technology to the iron-making blast furnace not only reduces CO2 emissions but also produces H2 as a byproduct that can be used as an auxiliary reductant to further decrease carbon consumption and emissions. With adequate H2 supply to the blast furnace the injection of H2 is limited because of the disadvantageous thermodynamic characteristics of the H2 reduction reaction in the blast furnace. This paper presents thermodynamic analysis of H2 behaviour at different stages with the thermal requirement consideration of an iron-making blast furnace. The effect of injecting CO2 lean top gas and CO2 conversion products H2–CO gas through the raceway and/or shaft tuyeres are investigated under different operating conditions. H2 utilisation efficiency and corresponding injection volume are studied by considering different reduction stages. The relationship between H2 injection and coke rate is established. Injecting 7.9–10.9 m3/tHM of H2 saved 1 kg/tHM coke rate depending on injection position. Compared with the traditional blast furnace injecting 80 m3/tHM of H2 with a medium oxygen enrichment rate (9%) and integrating CO2 capture and conversion reduces CO2 emissions from 534 to 278 m3/tHM. However increasing the hydrogen injection amount causes this iron-making process to consume more energy than a traditional blast furnace does.

The independent cross-party report highlights a ‘sensible middle ground’ in the renewables debate and calls for more effort in building cross-party consensus. It finds that the UK has only just begun to harness low carbon renewable resources bigger than North Sea oil and gas and argues that the Government could do more to narrow the scope of debate about the technology mix beyond 2020. It argues that it should work with industry and academia first to establish ‘low regrets’ levels of technology deployment and second to ensure that policies are in place to incentivise investments such as supply chain investment needed to deliver these low regrets actions.

This approach would help provide the longer term clarity that could secure supply chain investments giving the UK a head-start in the global race. The report finds that these investments could be missed delayed or more expensive if there is insufficient confidence about long term demand for key technologies such as offshore wind. Work by Government to help incentivise these investments would increase the likelihood that technology cost reductions are achieved and help mitigate against high costs if new nuclear or carbon capture and storage development fail or are delayed.

On affordability the report finds that there are ‘hidden’ benefits that the UK could see from investing more in renewables through electricity bills between now and 2020. These include: avoiding bill increases driven by fossil fuels; making electricity bills more predictable; and providing an economic boost. The extra money paid to support renewables and other low carbon generation such as nuclear power could be more than offset by energy efficiency savings although Government needs to do more to show how these savings will arise.

On sustainability the report tackles myths about the carbon emitted in manufacturing renewable technologies or in backing up varying technologies such as wind solar wave and tidal. It finds that even when considering these factors renewables are still amongst the most low carbon options. The report also looks at the sustainability of electricity from biomass. Bioenergy overall could provide up to ten per cent of energy and reduce the cost of cutting carbon by £44 billion per year in 2050. The Government’s new biomass policies are a pragmatic response to concerns about the sustainability of biomass power which balances protecting the environment building public confidence and enabling the sector to grow.

On security of supply the inquiry argues that debate should focus on the whole electricity system and that individual technologies should be considered in the context of how they add to or reduce system risks. Considered like this renewables reduce some risks such as fuel supply risks which caused concern last winter and add to others such as system balancing risks. System balancing risks from varying renewables (wind solar wave and tidal technologies) are manageable using a number of existing and developing technologies.

The independent report chaired by former Energy Minister Charles Hendry MP and Shadow Energy Minister Baroness Worthington was compiled between May and September 2013 and was sponsored by Siemens and DONG Energy. It is part of a year-long independent and cross party inquiry into the UK power sector the Future Electricity Series sponsored by the Institution of Gas Engineers and Managers.

Link to Launch Video

This study has developed traceable standards for evaluating impurities in hydrogen fuel according to ISO 14687. Impurities in raw H2 including sub mmol/mol levels of CO CO2 and CH4 were analyzed using multiple detectors while avoiding contamination. The gravimetric standards prepared included mixtures of the following nominal concentrations: 1 2 3e5 8e11 17e23 and 47e65 mmol/mol for CO2 CH4 and CO O2 N2 Ar and He respectively. The expanded uncertainty ranges were 0.8% for Ar N2 and He 1% for CH4 and CO and 2% for CO2 and O2. These standards were stable while that for CO varied by only 0.5% during a time span of three years. The prepared standards are useful for evaluating the compliance of H2 fuel in service stations with ISO 14687 quality requirements.

This study investigates the production of green hydrogen for use in oil refining as specified in the draft of European union delegated act published in May 2022. The European union plans to set strict requirements of additionality and reporting regarding the criteria of renewable electricity used in hydrogen production. Alkaline electrolyzer proton exchange membrane electrolyzer and solid oxide electrolyzer are evaluated in various scenarios supplied by wind power: power purchase agreement-based scenarios and wind power investment-based scenarios. In power purchase agreement-based scenarios baseload and pay as produced power purchase agreements (with and without electricity storage) are assessed. According to results the use of 600 MW compressed air energy storage could reduce the dependency on the grid by 7% but increase the cost of green hydrogen significantly. Investment-based scenarios produce green hydrogen with a lower operation cost but higher break-even price compared to power purchase agreement-based scenarios. The cheapest green hydrogen can be achieved by alkaline electrolyzer with baseload power purchase agreement. Direct ownership of wind power is outside the operation of oil refining industry thus power purchase agreements contracting is more likely to realize.

This paper discloses the architecture and related performance of an environment control system designed to be integrated within a complex multi-functional thermal and energy management system that manages the heat loads and generation of electric power in a hypersonic vehicle by benefitting from the presence of cryogenic liquid hydrogen onboard. A bleed-less architecture implementing an open-loop cycle with a boot-strap sub-freezing air cycle machine is suggested. Hydrogen boil-off reveals to be a viable cold source for the heat exchangers of the system as well as for the convective insulation layer designed around the cabin walls. Including a 2 mm boil-off convective layer into the cabin cross-section proves to be far more effective than a more traditional air convective layer of approximately 60 mm. The application to STRATOFLY MR3 a Mach 8 waverider cruiser using liquid hydrogen as propellant confirmed that presence of cryogenic tanks provides up to a 70% reduction in heat fluxes entering the cabin generated outside of it but inside the vehicle by the propulsive system and other onboard systems. The effectiveness of the architecture was confirmed for all Mach numbers (from 0.3 to 8) and all flight altitudes (from sea level to 35 km).

Recently smart energy hubs with hydrogen conversion and storage have received increased attention in the Netherlands. The hydrogen is to be used for vehicle filling stations industrial processes and heating. The scientific problem addressed in this paper is the proper sizing of capacities for renewable energy generation hydrogen conversion and storage in relation to a feasible business case for the energy hub while achieving security of supply. Scenario analysis is often used during the early stages of the energy planning process and for this an easy-to-use analysis model is required. This paper investigates available modelling approaches and develops an algorithmic modelling method which is worked out in Microsoft Excel and offers ease of use for scenario analysis purposes. The model is applied to case study which leads to important insights such as the expected price of hydrogen and the proper sizing of electrolyser and hydrogen storage for that case. The model is made available open-source. Future work is proposed in the direction of application of the model for other project cases and comparison of results with other available modelling tools.

This paper deals with two main issues regarding the specific energy consumption in an electrolyzer (i.e. the Faraday efficiency and the converter topology). The first aspect is addressed using a multistack configuration of proton exchange membrane (PEM) electrolyzers supplied by a wind turbine conversion system (WTCS). This approach is based on the modeling of the wind turbine and the electrolyzers. The WTCS and the electrolyzers are interfaced through a stacked interleaved DC–DC buck converter (SIBC) due to its benefits for this application in terms of the output current ripple and reliability. This converter is controlled so that it can offer dynamic behavior that is faster than the wind turbine avoiding overvoltage during transients which could damage the PEM electrolyzers. The SIBC is designed to be connected in array configuration (i.e. parallel architecture) so that each converter operates at its maximum efficiency. To assess the performance of the power management strategy experimental tests were carried out. The reported results demonstrate the correct behavior of the system during transient operation.

An adaptive response renewable energy plant (AREP) that provides grid balancing services and XeV station fuelling services (where “X” is any type) using renewable energy located in urban centres is described. The AREP has its own primary renewable energy sources and adapts operation in the short term to changing levels of excess or deficient energy on LV and MV electricity grids. The AREP adaptively responds by (1) storing excess energy in batteries for the short term and in hydrogen tanks after energy conversion by electrolysers for the long term; (2) returning power to the grid from either the AREP’s own primary (electron-based) energy sources or batteries and/or from hydrogen via conversion in fuel cells; (3) providing electricity for fast charging BeVs and PHeVs and hydrogen for FCeVs; and (4) exporting excess stored energy as hydrogen to domestic markets. The AREP also adapts over the long term by predictive planning of charging capacity such that the type and capacity of renewable energy equipment is optimised for future operations. A key advantage of this AREP configuration is a flexible “plug and play” capability with modular extension of energy assets. If the AREP footprint is constrained interaction with neighbouring AREPs as a mini-VPP-AREP network can assist in balancing short-term operating requirements. The benefits of this grid balancing and XeV renewable energy filling station or AREP are environmental social and economic through efficient functionality of appropriately sized components. AREPs provide a net zero emissions electricity solution to an existing network with short and long-term storage options as well as a net zero emissions fuel alternative to the transport sector while leveraging existing infrastructure with minimal upfront CAPEX. AREPs can give the flexibility a grid needs to enable high levels of renewable installations while developing green hydrogen production.

Fuel cell electric vehicles are generally considered to have broad development prospects due to their high efficiency and zero emissions. The governments of the United States Japan the European Union and China are taking action to promote the development of the industry. In 2020 China launched a fuel cell electric vehicle demonstration project and there will be 30∼50 thousand FCEVs included in this project by the end of 2025. How to standardize the consistency of data and develop a unified and accurate evaluation method is an important topic. The difficulty is how to keep balance among scientificity neutrality and feasibility in the evaluation method. In order to evaluate the performance of vehicles in demonstration operation projects China has issued the "Fuel Cell Electric Vehicle Test Specifications" which is an important guide for the future development of fuel cell electric vehicles in China. This paper compares the test methods for critical parameters in this specifications with those used in the United States and Japan. It explains China’s technical considerations in detail including fuel cell system rated power the volume power density of the fuel cell stack fuel cell system specific power fuel cell system sub-zero cold start and fuel cell electric vehicle range contributed by hydrogen. For the volume power density of the fuel cell stack as an example both the US Department of Energy and Japan’s New Energy and Industrial Technology Development Organization have proposed technical goals. However the lack of specific and detailed test methods has confused the industry. We propose a new test method using bipolar plate measurement based on scientificity feasibility and neutrality This is the first time to define the measuring method of the volume and specific power density of the fuel cell stack. For sub-zero cold start we put forward a feasible scheme for sub-zero cold start at the system level. For range contributed by hydrogen we propose a new test method that can distinguish the contributing of electric and hydrogen energy. Furthermore a hydrogen-to-electric conversion formula is proposed to calculate the equivalent hydrogen consumption which makes it possible to compare the energy consumption between plug-in and non-plug-in vehicles. At the same time this approach is significant in helping fuel cell-related enterprises to understand the formulation of China’s “Fuel Cell Electric Vehicle Test Specifications”. It should also be helpful for guiding product design and predicting fuel cell electric vehicle policy direction in China.

The production of blue hydrogen through sorption-enhanced processes has emerged as a suitable option to reduce greenhouse gas emissions. Sorption-enhanced steam–methane reforming (SESMR) is a process intensification of highly endothermic steam–methane reforming (SMR) ensured by in situ carbon capture through a solid sorbent making hydrogen production efficient and more environmentally sustainable. In this study a comprehensive energy model of SESMR was developed to carry out a detailed energy characterization of the process with the aim of filling a current knowledge gap in the literature. The model was applied to a bench-scale multicycle SESMR/sorbent regeneration test to provide an energy insight into the process. Besides the experimental advantages of higher hydrogen concentration (90 mol% dry basis 70 mol% wet basis) and performance of CO2 capture the developed energy model demonstrated that SESMR allows for substantially complete energy self-sufficiency through the process. In comparison to SMR with the same process conditions (650 ◦C 1 atm) performed in the same experimental rig SESMR improved the energy efficiency by about 10% further reducing energy needs.

Hydrogen mobility is one option for reducing local emissions avoiding greenhouse gas (GHG) emissions and moving away from a mainly oil-based transport system towards a diversification of energy sources. As hydrogen production can be based on a broad variety of technologies already existing or under development a comprehensive assessment of the different supply chains is necessary regarding not only costs but also diverse environmental impacts. Therefore in this paper a broad variety of hydrogen production technologies using different energy sources renewable and fossil are exemplarily assessed with the help of a Life Cycle Assessment and a cost assessment for Germany. As environmental impacts along with the impact category Climate change five more advanced impact categories are assessed. The results show that from an environmental point of view PEM and alkaline electrolysis are characterized by the lowest results in five out of six impact categories. Supply chains using fossil fuels in contrast have the lowest supply costs; this is true e.g. for steam methane reforming. Solar powered hydrogen production shows low impacts during hydrogen production but high impacts for transport and distribution to Germany. There is no single supply chain that is the most promising for every aspect assessed here. Either costs have to be lowered further or supply chains with selected environmental impacts have to be modified.

DNV has carried out an investigation into potential uses for smart gas meter data as part of Phase 1 of the Modernising Energy Data Applications competition as funded by UK Research & Innovation. In particular a series of calculations have been carried out to investigate the possibility of differentiating accidental gas leaks from normal appliance use in domestic properties. This is primarily with the aim of preventing explosions but the detection of leaks also has environmental and financial benefits.

Three gases have been considered in this study:

• A representative UK natural gas composition.
• A blend of 80% natural gas and 20% hydrogen.
• Pure hydrogen.

An established method was used to calculate the gas outflow rate from leaks into buildings downstream of the meter regulator. These gas leak rates were compared with the gas use by typical domestic appliances and these leaks were considered in the context of the smart gas meter data that is currently available in 30-minute periods. A representative set of gas accumulation calculations was performed. It was found that the following three general cases apply to all three gases:

• Small holes of up to 1 mm rarely reach flammable gas/air concentrations for any gas except under the most unfavourable conditions such as small volumes combined with low ventilation rates. These releases would likely be detected within 6 to 12 hours.
• Medium holes between 1 mm and 6 mm give outflow rates equivalent to a moderate to high level of gas use by appliances. The ability to detect these leaks is highly dependent on the hole size the time at which the leak begins and the normal gas use profile in the building. The larger leaks in this category would be detected within 30 to 60 minutes while the smaller leaks could take several hours to be clearly differentiated from appliance use. This is quick enough to prevent some explosions.
• Large holes of over 6 mm give leak rates greater than any gas use by appliances. These releases rapidly reach a flammable gas/air mixture in most cases but would typically be detected within the first 30-minute meter output period. Again some explosions could be prevented in this timescale.

An event tree has been used to quantify the approximate success rate of detecting and preventing explosion events. Using the currently available 30-minute smart meter data and functionality it is estimated that around 7% of explosions could be prevented with a slight variation depending on the gas type in use. Additional functionality could be included in the meter to improve this performance. Typically one of the risk mitigation measures in isolation increases the explosion prevention rate to around 15%. If multiple improvements are made then the detection rate is predicted to increase to around 30%.

An examination of detailed historical incident information suggests that the explosions that lead to fatalities or significant damage to houses are typically of the type that would be more likely to be detected and prevented. It is estimated that between 25% and 75% of the more severe explosions could be prevented depending on which potential improvements are implemented.

Based on the conservative estimates of explosion prevention a cost benefit analysis suggests that it is justifiable to spend between around £1 and £10 per meter installed to implement the proposed technology. This is based purely on lives saved and does not take account of other benefits.

The pursuit of future energy systems that can meet electricity demands while supporting the attainment of societal environment goals including mitigating climate change and reducing pollution in the air has led to questions regarding the viability of continued use of natural gas. Natural gas use particularly for electricity generation has increased in recent years due to enhanced resource availability from non-traditional reserves and pressure to reduce greenhouse gasses (GHG) from higher-emitting sources including coal generation. While lower than coal emissions current natural gas power generation strategies primarily utilize combustion with higher emissions of GHG and criteria pollutants than other low-carbon generation options including renewable resources. Furthermore emissions from life cycle stages of natural gas production and distribution can have additional detrimental GHG and air quality (AQ) impacts. On the other hand natural gas power generation can play an important role in supporting renewable resource integration by (1) providing essential load balancing services and (2) supporting the use of gaseous renewable fuels through the existing infrastructure of the natural gas system. Additionally advanced technologies and strategies including fuel cells and combined cooling heating and power (CCHP) systems can facilitate natural gas generation with low emissions and high efficiencies. Thus the role of natural gas generation in the context of GHG mitigation and AQ improvement is complex and multi-faceted requiring consideration of more than simple quantification of total or net emissions. If appropriately constructed and managed natural gas generation could support and advance sustainable and renewable energy. In this paper a review of the literature regarding emissions from natural gas with a focus on power generation is conducted and discussed in the context of GHG and AQ impacts. In addition a pathway forward is proposed for natural gas generation and infrastructure to maximize environmental benefits and support renewable resources in the attainment of emission reductions.

Renewable hydrogen is considered key in the transition towards a carbon-neutral future. This is due to its spatio-temporal storage and sector coupling potential which has seen it referred to as energy vector. However many unresolved issues remain regarding hydrogen's large-scale deployment e.g. least-cost production optimal facility siting and overall implications on power and energy systems. Expansion planning provides an option to study these issues in the holistic context of energy systems. To this end this article presents a comprehensive review on state-of-the-art expansion planning models that consider integrated power natural gas and hydrogen systems. We cluster the existing literature in terms of modelling themes and scope study the applied systematic modelling characteristics and conduct an in-depth analysis of the technical model features regarding hydrogen technologies and natural gas infrastructure. Finally we identify and discuss research gaps in the existing literature.

To efficiently convert and utilize intermittent solar energy a novel solar-driven ethanol steam reforming (ESR) system integrated with a membrane reactor is proposed. It has the potential to convert low-grade solar thermal energy into high energy level chemical energy. Driven by chemical potential hydrogen permeation membranes (HPM) can separate the generated hydrogen and shift the ESR equilibrium forward to increase conversion and thermodynamic efficiency. The thermodynamic and environmental performances are analyzed via numerical simulation under a reaction temperature range of 100–400 ◦C with permeate pressures of 0.01–0.75 bar. The highest theoretical conversion rate is 98.3% at 100 ◦C and 0.01 bar while the highest first-law efficiency solar-to-fuel efficiency and exergy efficiency are 82.3% 45.3% and 70.4% at 215 ◦C and 0.20 bar. The standard coal saving rate (SCSR) and carbon dioxide reduction rate (CDRR) are maximums of 101 g·m−2 ·h −1 and 247 g·m−2 ·h −1 at 200 ◦C and 0.20 bar with a hydrogen generation rate of 22.4 mol·m−2 ·h −1 . This study illustrates the feasibility of solar-driven ESR integrated with a membrane reactor and distinguishes a novel approach for distributed hydrogen generation and solar energy utilization and upgradation.

Green hydrogen production is essential to meeting the conference of the parties’ (COP) decarbonization goals; however this method of producing hydrogen is not as cost-effective as hydrogen production from fossil fuels. This study analyses an off-grid photovoltaic energy system designed to feed a proton-exchange membrane water electrolyzer for hydrogen production to evaluate the optimal electrolyzer size. The system has been analyzed in Baghdad the capital of Iraq using experimental meteorological data. The 12 kWp photovoltaic array is positioned at the optimal annual tilt angle for the selected site. The temperature effect on photovoltaic modules is taken into consideration. Several electrolyzers with capacities in the range of 2–14 kW were investigated to assess the efficiency and effectiveness of the system. The simulation process was conducted using MATLAB and considering the project life span from 2021 to 2035. The results indicate that various potentially cost-competitive alternatives exist for systems with market combinations resembling renewable hydrogen wholesale. It has been found that the annual energy generated by the analyzed photovoltaic system is 18892 kWh at 4313 operating hours and the obtained hydrogen production cost ranges from USD 5.39/kg to USD 3.23/kg. The optimal electrolyzer capacity matches a 12 kWp PV system equal to 8 kW producing 37.5 kg/year/kWp of hydrogen for USD 3.23/kg.

Hydrogen production using renewable power is becoming an essential pillar for future sustainable energy sector development worldwide. The Sultanate of Oman is presently integrating renewable power generations with a large share of solar photovoltaic (PV) systems. The possibility of using the solar potential of the Sultanate can increase energy security and contribute to the development of the sustainable energy sector not only for the country but also for the international community. This study presents the hydrogen production potential using solar resources available in the Sultanate. About 15 locations throughout the Sultanate are considered to assess the hydrogen production opportunity using a solar PV system. A rank of merit order of the locations for producing hydrogen is identified. It reveals that Thumrait and Marmul are the most suitable locations whereas Sur is the least qualified. This study also assesses the economic feasibility of hydrogen production which shows that the levelized cost of hydrogen (LCOH) in the most suitable site Thumrait is 6.31 USD/kg. The LCOH in the least convenient location Sur is 7.32 USD/kg. Finally a sensitivity analysis is performed to reveal the most significant influential factor affecting the future’s green hydrogen production cost. The findings indicate that green hydrogen production using solar power in the Sultanate is promising and the LCOH is consistent with other studies worldwide.