Publications
Methanol Steam Reforming for Hydrogen Generation Via Conventional and Membrane Reactors: A Review
Sep 2013
Publication
Variable renewable energy (VRE) is expected to play a major role in the decarbonization of the electricity sector. However decarbonization via VRE requires a fleet of flexible dispatchable plants with low CO2 emissions to supply clean power during times with limited wind and sunlight. These plants will need to operate at reduced capacity factors with frequent ramps in electricity output posing techno-economic challenges. This study therefore presents an economic assessment of a new near-zero emission power plant designed for this purpose. The gas switching reforming combined cycle (GSR-CC) plant can produce electricity during times of low VRE output and hydrogen during times of high VRE output. This product flexibility allows the plant to operate continuously even when high VRE output makes electricity production uneconomical. Although the CO2 avoidance cost of the GSR-CC plant (€61/ton) was similar to the benchmark post-combustion CO2 capture plant under baseload operation GSR-CC clearly outperformed the benchmark in a more realistic scenario where continued VRE expansion forces power plants into mid-load operation (45% capacity factor). In this scenario GSR-CC promises a 5 %-point higher annualized investment return than the post-combustion benchmark. GSR-CC therefore appears to be a promising concept for a future scenario with high VRE market share and CO2 prices provided that a large market for clean hydrogen is established.
2020 It's Time To Get Real
Mar 2020
Publication
Gi Editor Sharon Baker-Hallam sits down with Chris Stark CEO of the Committee on Climate Change to talk about this year’s Sir Denis Rooke Memorial Lecture the economic opportunities to be found in going green and why 2020 is a critical year in the ongoing battle against rising global temperatures
Seasonal and Multi-Seasonal Energy Storage by Power-to-Methane Technology
Jun 2021
Publication
The time-range of applicability of various energy-storage technologies are limited by self-discharge and other inevitable losses. While batteries and hydrogen are useful for storage in a time-span ranging from hours to several days or even weeks for seasonal or multi-seasonal storage only some traditional and quite costly methods can be used (like pumped-storage plants Compressed Air Energy Storage or energy tower). In this paper we aim to show that while the efficiency of energy recovery of Power-to-Methane technology is lower than for several other methods due to the low self-discharge and negligible standby losses it can be a suitable and cost-effective solution for seasonal and multi-seasonal energy storage.
Effects of Quantum Confinement of Hydrogen in Nanocavities – Experimental INS Results and New Insights
Jun 2020
Publication
Current developments of non-relativistic quantum mechanics appear to predict and reveal counter-intuitive dynamical effects of hydrogen in nanostructured materials that are of considerable importance for basic research as well as for technological applications. In this review the experimental focus is on H2O and H molecules in carbon nanotubes and other nanocavities that have been experimentally investigated using the well-established technique of incoherent inelastic neutron scattering (INS). For instance the momentum and energy transfers as obtained from the commonly used standard data analysis techniques from a
(I) H2 molecule in a C-nanotube resulting in a roto-translational motion along the nanotube axis seems to (1) either violate the standard conservation laws or (2) to attribute to the H molecule undergoing translation the effective mass a.m.u. (atomic mass units) instead of the expected 2 a.m.u. A similar striking anomalous effect has been found in the neutron-H scattering from the
(II) H2O molecules in nano-channels of some solid materials in which O-H stretching vibrations along the channel axis are created.
The results of this scattering process seem to once again either violate the standard conservation laws or to attribute to the effective mass of the struck H2 molecule as a.m.u. instead of the expected value of 1 a.m.u. We show that these counterintuitive observations from the INS studies have no conventional interpretation within the standard non-relativistic scattering theory. However they can be qualitatively interpreted “from first principles” within the framework of modern theories of
(III) time-symmetric quantum dynamics as provided by the weak values (WV) and two-state- vector formalism (TSVF)
and/or
(IV) quantum correlations especially quantum discord (QD) and quantum thermodynamics (QTD).
The theoretical analysis provides an intuitive understanding of the experimental results gives strong evidence that the nano-structured cavities do represent quantum systems which participate significantly in the dynamics of the neutron-H scattering and surprisingly shows that new physical information can be derived from the experimental data. This latter point may also have far-reaching consequences for technology and material sciences (e.g. fuel cells H storage materials etc.). Moreover novel insights into the short-lived quantum dynamics and/or quantum information theory can be gained.
(I) H2 molecule in a C-nanotube resulting in a roto-translational motion along the nanotube axis seems to (1) either violate the standard conservation laws or (2) to attribute to the H molecule undergoing translation the effective mass a.m.u. (atomic mass units) instead of the expected 2 a.m.u. A similar striking anomalous effect has been found in the neutron-H scattering from the
(II) H2O molecules in nano-channels of some solid materials in which O-H stretching vibrations along the channel axis are created.
The results of this scattering process seem to once again either violate the standard conservation laws or to attribute to the effective mass of the struck H2 molecule as a.m.u. instead of the expected value of 1 a.m.u. We show that these counterintuitive observations from the INS studies have no conventional interpretation within the standard non-relativistic scattering theory. However they can be qualitatively interpreted “from first principles” within the framework of modern theories of
(III) time-symmetric quantum dynamics as provided by the weak values (WV) and two-state- vector formalism (TSVF)
and/or
(IV) quantum correlations especially quantum discord (QD) and quantum thermodynamics (QTD).
The theoretical analysis provides an intuitive understanding of the experimental results gives strong evidence that the nano-structured cavities do represent quantum systems which participate significantly in the dynamics of the neutron-H scattering and surprisingly shows that new physical information can be derived from the experimental data. This latter point may also have far-reaching consequences for technology and material sciences (e.g. fuel cells H storage materials etc.). Moreover novel insights into the short-lived quantum dynamics and/or quantum information theory can be gained.
Molecular Dynamics Studies of Hydrogen Effect on Intergranular Fracture in α-Iron
Nov 2020
Publication
In the current study the effect of hydrogen atoms on the intergranular failure of α-iron is examined by a molecular dynamics (MD) simulation. The effect of hydrogen embrittlement on the grain boundary (GB) is investigated by diffusing hydrogen atoms into the grain boundaries using a bicrystal body-centered cubic (BCC) model and then deforming the model with a uniaxial tension. The Debye Waller factors are applied to illustrate the volume change of GBs and the simulation results suggest that the trapped hydrogen atoms in GBs can therefore increase the excess volume of GBs thus enhancing intergranular failure. When a constant displacement loading is applied to the bicrystal model the increased strain energy can barely be released via dislocation emission when H is present. The hydrogen pinning effect occurs in the current dislocation slip system <111>{112}. The hydrogen atoms facilitate cracking via a decrease of the free surface energy and enhance the phase transition via an increase in the local pressure. Hence the failure mechanism is prone to intergranular failure so as to release excessive pressure and energy near GBs. This study provides a mechanistic framework of intergranular failure and a theoretical model is then developed to predict the intergranular cracking rate
Baseload Electricity and Hydrogen Supply Based on Hybrid PV-wind Power Plants
Sep 2019
Publication
The reliable supplies of electricity and hydrogen required for 100% renewable energy systems have been found to be achievable by utilisation of a mix of different resources and storage technologies. In this paper more demanding parameter conditions than hitherto considered are used in measurement of the reliability of variable renewable energy resources. The defined conditions require that supply of baseload electricity (BLEL) and baseload hydrogen (BLH2) occurs solely using cost-optimised configurations of variable photovoltaic solar power onshore wind energy and balancing technologies. The global scenario modelling is based on hourly weather data in a 0.45° × 0.45° spatial resolution. Simulations are conducted for Onsite and Coastal Scenarios from 2020 to 2050 in 10-year time-steps. The results show that for 7% weighted average cost of capital Onsite BLEL can be generated at less than 119 54 41 and 33 €/MWhel in 2020 2030 2040 and 2050 respectively across the best sites with a maximum 20000 TWh annual cumulative generation potential. Up to 20000 TWhH2HHV Onsite BLH2 can be produced at less than 66 48 40 and 35 €/MWhH2HHV in 2020 2030 2040 and 2050 respectively. A partially flexible electricity demand at 8000 FLh could significantly reduce the costs of electricity supply in the studied scenario. Along with battery storage power-to-hydrogen-to-power is found to have a major role in supply of BLEL beyond 2030 as both a daily and seasonal balancing solution. Batteries are not expected to have a significant role in the provision of electricity to water electrolysers.
Black TiO2 for Solar Hydrogen Conversion
Feb 2017
Publication
Titanium dioxide (TiO2 ) has been widely investigated for photocatalytic H2 evolution and photoelectrochemical (PEC) water splitting since 1972. However its wide bandgap (3.0–3.2 eV) limits the optical absorption of TiO2 for sufficient utilization of solar energy. Blackening TiO2 has been proposed as an effective strategy to enhance its solar absorption and thus the photocatalytic and PEC activities and aroused widespread research interest. In this article we reviewed the recent progress of black TiO2 for photocatalytic H2 evolution and PEC water splitting along with detailed introduction to its unique structural features optical property charge carrier transfer property and related theoretical calculations. As summarized in this review article black TiO2 could be a promising candidate for photoelectrocatalytic hydrogen generation via water splitting and continuous efforts are deserved for improving its solar hydrogen efficiency.
Research on the Concept of Hydrogen Supply Chains and Power Grids Powered by Renewable Energy Sources: A Scoping Review with the Use of Text Mining
Jan 2022
Publication
The key direction of political actions in the field of sustainable development of the energy sector and economy is the process of energy transformation (decarbonization) and increasing the share of renewable energy sources (RES) in the supply of primary energy. Regardless of the indisputable advantages RES are referred to as unstable energy sources. A possible solution might be the development of the concept of hydrogen supply chains especially the so-called green hydrogen obtained in the process of electrolysis from electricity produced from RES. The aim of the research undertaken in the article is to identify the scope of research carried out in the area of hydrogen supply chains and to link this research with the issues of the operation of electricity distribution networks powered by RES. As a result of the scoping review and the application of the text-mining method using the IRaMuTeQ tool which includes the analysis of the content of 12 review articles presenting the current research achievements in this field over the last three years (2016–2020) it was established that the issues related to hydrogen supply chains including green hydrogen are still not significantly associated with the problem of the operation of power grids. The results of the conducted research allow formulating recommendations for further research areas.
Integrated Electricity, Hydrogen and Methane System Modelling Framework: Application to the Dutch Infrastructure Outlook 2050
Mar 2021
Publication
The future energy system is widely expected to show increasing levels of integration across differing energy carriers. Electricity hydrogen methane and heat systems may become increasingly interdependent due to coupling through conversion and hybrid energy technologies. Market parties network operators policy makers and regulators require tools to capture implications of possible techno-economic and institutional developments in one system for the operation of others. In this article we provide an integrated electricity hydrogen and methane systems modelling framework focusing on interdependencies between them. The proposed integrated electricity and (renewable) gas system model is a market equilibrium model with hourly price and volume interactions considering ramp rates of conventional units variability of intermittent renewables conversion transport as well as storage of electricity hydrogen and methane. The integrated model is formulated as a linear program under the assumption of perfect competition. As proof-of-concept the model has been applied to a test case consisting of 34 electricity nodes 19 hydrogen nodes and 22 methane nodes reflecting the regional governance scenario in the Dutch Infrastructure Outlook 2050 study. The case study also includes different sensitivity analyses with regard to variable renewable capacity energy demand and biomass prices to illustrate model response to perturbations of its main drivers. This article demonstrates that the interweaving of electricity hydrogen and methane systems can provide the required flexibility in the future energy system.
The Path to Carbon Neutrality in China: A Paradigm Shift in Fossil Resource Utilization
Jan 2022
Publication
The Paris Agreement has set the goal of carbon neutrality to cope with global climate change. China has pledged to achieve carbon neutrality by 2060 which will strategically change everything in our society. As the main source of carbon emissions the consumption of fossil energy is the most profoundly affected by carbon neutrality. This work presents an analysis of how China can achieve its goal of carbon neutrality based on its status of fossil energy utilization. The significance of transforming fossils from energy to resource utilization in the future is addressed while the development direction and key technologies are discussed.
Evaluation of Corrosion, Mechanical Properties and Hydrogen Embrittlement of Casing Pipe Steels with Different Microstructure
Dec 2021
Publication
In the research the corrosion and mechanical properties as well as susceptibility to hydrogen embrittlement of two casing pipe steels were investigated in order to assess their serviceability in corrosive and hydrogenating environments under operation in oil and gas wells. Two carbon steels with different microstructures were tested: the medium carbon steel (MCS) with bainitic microstructure and the medium-high carbon steel (MHCS) with ferrite–pearlite microstructure. The results showed that the corrosion resistance of the MHCS in CO2-containing acid chloride solution simulating formation water was significantly lower than that of the MCS which was associated with microstructure features. The higher strength MCS with the dispersed microstructure was less susceptible to hydrogen embrittlement under preliminary electrolytic hydrogenation than the lower strength MHCS with the coarse-grained microstructure. To estimate the embrittlement of steels the method of the FEM load simulation of the specimens with cracks was used. The constitutive relations of the true stress–strain of the tested steels were defined. The stress and strain dependences in the crack tip were calculated. It was found that the MHCS was characterized by the lower plasticity on the stage of the neck formation of the specimen and the lower fracture toughness than the other one. The obtained results demonstrating the limitations of the usage of casing pipes made of the MHCS with the coarse-grained ferrite/pearlite microstructure in corrosive and hydrogenating environments were discussed.
Power-to-gas for Injection into the Gas Grid: What Can We Learn from Real-life Projects, Economic Assessments and Systems Modelling
Sep 2018
Publication
Power-to-gas is a key area of interest for decarbonisation and increasing flexibility in energy systems as it has the potential both to absorb renewable electricity at times of excess supply and to provide backup energy at times of excess demand. By integrating power-to-gas with the natural gas grid it is possible to exploit the inherent linepack flexibility of the grid and shift some electricity variability onto the gas grid. Furthermore provided the gas injected into the gas grid is low-carbon such as hydrogen from renewable power-to-gas then overall greenhouse gas emissions from the gas grid can be reduced.<br/>This work presents the first review of power-to-gas to consider real-life projects economic assessments and systems modelling studies and to compare them based on scope assumptions and outcomes. The review focuses on power-to-gas for injection into the gas grid as this application has specific economic technical and modelling opportunities and challenges.<br/>The review identified significant interest in and potential for power-to-gas in combination with the gas grid however there are still challenges to overcome to find profitable business cases and manage local and system-wide technical issues. Whilst significant modelling of power-to-gas has been undertaken more is needed to fully understand the impacts of power-to-gas and gas grid injection on the operational behaviour of the gas grid taking into account dynamic and spatial effects.
Business Energy and Industrial Strategy Committee Inquiry into Decarbonising Heat in Homes
Dec 2020
Publication
The Hydrogen Taskforce welcomes the opportunity to submit evidence to the Business Energy and Industrial Strategy Committee’s inquiry into decarbonising heat in homes. It is the Taskforce’s view that:
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
- Decarbonising heat is one of the biggest challenges that the UK faces in meeting Net Zero and several solutions will be required;
- Hydrogen can play a valuable role in reducing the cost of decarbonising heat. Its high energy density enables it to be stored cost effectively at scale providing system resilience;
- Hydrogen heating can be implemented at minimal disruption to the consumer;
- The UK holds world-class advantages in hydrogen production distribution and application; and
- Other economies are moving ahead in the development of this sector and the UK must respond.
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
A Production and Delivery Model of Hydrogen from Solar Thermal Energy in the United Arab Emirates
May 2022
Publication
Hydrogen production from surplus solar electricity as energy storage for export purposes can push towards large-scale application of solar energy in the United Arab Emirates and the Middle East region; this region’s properties of high solar irradiance and vast empty lands provide a good fit for solar technologies such as concentrated solar power and photovoltaics. However a thorough comparison between the two solar technologies as well as investigating the infrastructure of the United Arab Emirates for a well-to-ship hydrogen pathway is yet to be fully carried out. Therefore in this study we aim to provide a full model for solar hydrogen production and delivery by evaluating the potential of concentrated solar power and photovoltaics in the UAE then comparing two different pathways for hydrogen delivery based on the location of hydrogen production sites. A Solid Oxide Cell Electrolyzer (SOEC) is used for technical comparison while the shortest routes for hydrogen transport were analyzed using Geographical Information System (GIS). The results show that CSP technology coupled with SOEC is the most favorable pathway for large-scale hydrogen from solar energy production in the UAE for export purposes. Although PV has a slightly higher electricity potential compared to CSP around 42 GWh/km2 to 41.1 GWh/km2 respectively CSP show the highest productions rates of over 6 megatons of hydrogen when the electrolyzer is placed at the same site as the CSP plant while PV generates 5.15 megatons when hydrogen is produced at the same site with PV plants; meanwhile hydrogen from PV and CSP shows similar levels of 4.8 and 4.6 megatons of hydrogen respectively when electrolyzers are placed at port sites. Even considering the constraints in the UAE’s infrastructure and suggesting new shorter electrical transmission lines that could save up to 0.1 megatons of hydrogen in the second pathway production at the same site with CSP is still the most advantageous scenario.
Prospects of Enhancing the Understanding of Material-hydrogen Interaction by Novel In-situ and In-operando Methods
Jan 2022
Publication
A main scientific and technical challenge facing the implementation of new and sustainable energy sources is the development and improvement of materials and components. In order to provide commercial viability of these applications an intensive research in material-hydrogen (H) interaction is required. This work provides an overview of recently developed in-situ and in-operando H-charging methods and their applicability to investigate mechanical properties H-absorption characteristics and H embrittlement (HE) susceptibility of a wide range of materials employed in H-related technologies such as subsea oil and gas applications nuclear fusion and fuel cells.
Influence of Pressure, Temperature and Organic Surface Concentration on Hydrogen Wettability of Caprock; Implications for Hydrogen Geo-storage
Sep 2021
Publication
Hydrogen (H2) as a cleaner fuel has been suggested as a viable method of achieving the decarbonization objectives and meeting increasing global energy demand. However successful implementation of a full-scale hydrogen economy requires large-scale hydrogen storage (as hydrogen is highly compressible). A potential solution to this challenge is injecting hydrogen into geologic formations from where it can be withdrawn again at later stages for utilization purposes. The geostorage capacity of a porous formation is a function of its wetting characteristics which strongly influence residual saturations fluid flow rate of injection rate of withdrawal and containment security. However literature severely lacks information on hydrogen wettability in realistic geological and caprock formations which contain organic matter (due to the prevailing reducing atmosphere). We therefore measured advancing (θa) and receding (θr) contact angles of mica substrates at various representative thermo-physical conditions (pressures 0.1-25 MPa temperatures 308–343 K and stearic acid concentrations of 10−9 - 10−2 mol/L). The mica exhibited an increasing tendency to become weakly water-wet at higher temperatures lower pressures and very low stearic acid concentration. However it turned intermediate-wet at higher pressures lower temperatures and increasing stearic acid concentrations. The study suggests that the structural H2 trapping capacities in geological formations and sealing potentials of caprock highly depend on the specific thermo-physical condition. Thus this novel data provides a significant advancement in literature and will aid in the implementation of hydrogen geo-storage at an industrial scale.
Power-to-Gas: Electrolysis and Methanation Status Review
Jun 2019
Publication
This review gives a worldwide overview on Power-to-Gas projects producing hydrogen or renewable substitute natural gas focusing projects in central Europe. It deepens and completes the content of previous reviews by including hitherto unreviewed projects and by combining project names with details such as plant location. It is based on data from 153 completed recent and planned projects since 1988 which were evaluated with regards to plant allocation installed power development plant size shares and amounts of hydrogen or substitute natural gas producing examinations and product utilization phases. Cost development for electrolysis and carbon dioxide methanation was analyzed and a projection until 2030 is given with an outlook to 2050.<br/>The results show substantial cost reductions for electrolysis as well as for methanation during the recent years and a further price decline to less than 500 euro per kilowatt electric power input for both technologies until 2050 is estimated if cost projection follows the current trend. Most of the projects examined are located in Germany Denmark the United States of America and Canada. Following an exponential global trend to increase installed power today's Power-to-Gas applications are operated at about 39 megawatt. Hydrogen and substitute natural gas were investigated on equal terms concerning the number of projects.
Achievements of European Projects on Membrane Reactor for Hydrogen Production
May 2017
Publication
Membrane reactors for hydrogen production can increase both the hydrogen production efficiency at small scale and the electric efficiency in micro-cogeneration systems when coupled with Polymeric Electrolyte Membrane fuel cells. This paper discusses the achievements of three European projects (FERRET FluidCELL BIONICO) which investigate the application of the membrane reactor concept to hydrogen production and micro-cogeneration systems using both natural gas and biofuels (biogas and bio-ethanol) as feedstock. The membranes used to selectively separate hydrogen from the other reaction products (CH4 CO2 H2O etc.) are of asymmetric type with a thin layer of Pd alloy (<5 μm) and supported on a ceramic porous material to increase their mechanical stability. In FERRET the flexibility of the membrane reactor under diverse natural gas quality is validated. The reactor is integrated in a micro-CHP system and achieves a net electric efficiency of about 42% (8% points higher than the reference case). In FluidCELL the use of bio-ethanol as feedstock for micro-cogeneration Polymeric Electrolyte Membrane based system is investigated in off-grid applications and a net electric efficiency around 40% is obtained (6% higher than the reference case). Finally BIONICO investigates the hydrogen production from biogas. While BIONICO has just started FERRET and FluidCELL are in their third year and the two prototypes are close to be tested confirming the potentiality of membrane reactor technology at small scale.
The Role of the Substrate on the Mechanical and Thermal Stability of Pd Thin Films During Hydrogen (De)sorption
Nov 2020
Publication
In this work we studied the mechanical and thermal stability of ~100 nm Pd thin films magnetron sputter deposited on a bare oxidized Si(100) wafer a sputtered Titanium (Ti) intermediate layer and a spin-coated Polyimide (PI) intermediate layer. The dependence of the film stability on the film morphology and the film-substrate interaction was investigated. It was shown that a columnar morphology with elongated voids at part of the grain boundaries is resistant to embrittlement induced by the hydride formation (α↔β phase transitions). For compact film morphology depending on the rigidity of the intermediate layer and the adherence to the substrate complete transformation (Pd-PI-SiO2/Si) or partly suppression (Pd-Ti-SiO2/Si) of the α to β-phase was observed. In the case of Pd without intermediate layer (Pd-SiO2/Si) buckling delamination occurred. The damage and deformation mechanisms could be understood by the analysis of the stresses and dislocation (defects) behavior near grain boundaries and the film-substrate interface. From diffraction line-broadening combined with microscopy analysis we showed that in Pd thin films stresses relax at critical stress values via different relaxation pathways depending on film-microstructure and film-substrate interaction. On the basis of the in-situ hydriding experiments it was concluded that a Pd film on a flexible PI intermediate layer exhibits free-standing film-like behavior besides being strongly clamped on a stiff SiO2/Si substrate.
Establishing a Regional Hydrogen Economy: Accelerating the Carbon Transition in South Yorkshire, UK
May 2019
Publication
The establishment of a strong hydrogen economy nationally and locally is a very real opportunity and one that is rapidly becoming within reach.<br/>This report presents a vision for the role that hydrogen could play specifically in South Yorkshire (UK) to help meet carbon reduction targets and contribute to the health and economic prosperity of the region.<br/>It also highlights five themes as levers of growth and explores potential actions and collaborations as well as a list of ambitions for future hydrogen projects. Hydrogen can be used in transport industry and heating. Synergies need exploring for example the by-product of oxygen from hydrogen production can be used by industry. Aggregating opportunities is important in developing a hydrogen economy.<br/>The report concludes with a call to action to build momentum for the South Yorkshire hydrogen economy and accelerate the drive to net zero emissions particularly in the most challenging sectors.<br/>This South Yorkshire specific report supports our global thought piece Establishing a Hydrogen Economy: The future of energy 2035
No more items...