- Home
- A-Z Publications
- Publications
Publications
Techno-Economic Analysis of Cement Decarbonization Techniques: Oxygen Enrichment vs. Hydrogen Fuel
Feb 2024
Publication
The Paris Agreement aims to limit global warming and one of the most polluting sectors is heavy industry where cement production is a significant contributor. This work briefly explores some alternatives recycling reducing clinker content waste heat recovery and carbon capture discussing their advantages and drawbacks. Then it examines the economic viability and benefits of increasing oxygen concentration in the primary burning air from 21 to 27 vol.% which could improve clinker production by 7% and the production of hydrogen through PEM electrolysis to make up 5% of the fuel thermal fraction considering both in a cement plant producing 3000 tons of clinker per day. This analysis used reference values from Secil an international company for cement and building materials to determine the required scale of the oxygen and hydrogen production respectively and calculate the CAPEX of each approach. It is concluded that oxygen enrichment can provide substantial fuel savings for a relatively low cost despite a possible significant increase in NOx emissions. However hydrogen production at this scale is not currently economically viable.
Multi-Physics Digital Model of an Aluminum 2219 Liquid Hydrogen Aircraft Tank
Feb 2024
Publication
Future liquid hydrogen-powered aircraft requires the design and optimization of a large number of systems and subsystems with cryogenic tanks being one of the largest and most critical. Considering previous space applications these tanks are usually stiffened by internal members such as stringers frames and stiffeners resulting in a complex geometry that leads to an eventual reduction in weight. Cryogenic tanks experience a variety of mechanical and thermal loading conditions and are usually constructed out of several different materials. The complexity of the geometry and the loads highlights the necessity for a computational tool in order to conduct analysis. In this direction the present work describes the development of a multi-physics finite element digital simulation conducting heat transfer and structural analysis in a fully parametric manner in order to be able to support the investigation of different design concepts materials geometries etc. The capabilities of the developed model are demonstrated by the design process of an independent-type aluminum 2219 cryogenic tank for commuter aircraft applications. The designed tank indicates a potential maximum take-off weight reduction of about 8% for the commuter category and demonstrates that aluminum alloys are serious candidate materials for future aircraft.
Integration of Renewable-Energy-Based Green Hydrogen into the Energy Future
Sep 2023
Publication
There is a growing interest in green hydrogen with researchers institutions and countries focusing on its development efficiency improvement and cost reduction. This paper explores the concept of green hydrogen and its production process using renewable energy sources in several leading countries including Australia the European Union India Canada China Russia the United States South Korea South Africa Japan and other nations in North Africa. These regions possess significant potential for “green” hydrogen production supporting the transition from fossil fuels to clean energy and promoting environmental sustainability through the electrolysis process a common method of production. The paper also examines the benefits of green hydrogen as a future alternative to fossil fuels highlighting its superior environmental properties with zero net greenhouse gas emissions. Moreover it explores the potential advantages of green hydrogen utilization across various industrial commercial and transportation sectors. The research suggests that green hydrogen can be the fuel of the future when applied correctly in suitable applications with improvements in production and storage techniques as well as enhanced efficiency across multiple domains. Optimization strategies can be employed to maximize efficiency minimize costs and reduce environmental impact in the design and operation of green hydrogen production systems. International cooperation and collaborative efforts are crucial for the development of this technology and the realization of its full benefits.
Green Hydrogen Integration in Aluminium Recycling: Techno-economic Analysis Towards Sustainability Transition in the Expanding Aluminium Market
Feb 2024
Publication
The use of aluminum-based products is widespread and growing particularly in industries such as automotive food packaging and construction. Obtaining aluminum is expensive and energy-intensive making the recycling of existing products essential for economic and environmental viability. This work explores the potential of using green hydrogen as a replacement for natural gas in the smelting and refining furnaces in aluminum recycling facilities. The adoption of green hydrogen has the potential to curtail approximately 4.54 Ktons/year of CO2 emissions rendering it a sustainable and economically advantageous solution. The work evaluates the economic viability of a case study through assessing the Net Present Value (NPV) and the Internal Rate of Return (IRR). Furthermore it is employed single- and multi-parameter sensitivity analyses to obtain insight on the most relevant conditions to achieve economic viability. Results demonstrate that integrating on-site green hydrogen generation yields a favorable NPV of €57370 an IRR of 9.83% and a 19.63-year payback period. The primary factors influencing NPV are the initial electricity consumption stack and the H2 price.
Upcycling of Plastic Wastes for Hydrogen Production: Advances and Perspectives
Feb 2024
Publication
The abundant plastic wastes become an imperative global issue and how to handle these organic wastes gains growing scientific and industrial interest. Recently converting plastic wastes into hydrogen fuel has been investigated and the “waste-to-value” practice accelerates the circular economy. To accelerate the development of plastic-to-hydrogen conversion in this review recent advances in plastic-to-hydrogen conversion via thermochemical photocatalytic and electrocatalytic routes are analyzed. All of the thermo- photo- and electrochemical processes can transform different plastic wastes into hydrogen and the hydrogen production efficiency depends heavily on the selected techniques operating parameters and applied catalysts. The application of rational-designed catalysts can promote the selective production of hydrogen from plastic feedstocks. Further studies on process optimization cost-effective catalyst design and mechanism investigation are needed.
An Experimental Investigation of Hydrogen Production through Biomass Electrolysis
Jan 2024
Publication
This work investigated hydrogen production from biomass feedstocks (i.e. glucose starch lignin and cellulose) using a 100 mL h-type proton exchange membrane electrolysis cell. Biomass electrolysis is a promising process for hydrogen production although low in technology readiness level but with a series of recognised advantages: (i) lower-temperature conditions (compared to thermochemical processes) (ii) minimal energy consumption and low-cost post-production (iii) potential to synthesise high-volume H2 and (iv) smaller carbon footprint compared to thermochemical processes. A Lewis acid (FeCl3 ) was employed as a charge carrier and redox medium to aid in the depolymerisation/oxidation of biomass components. A comprehensive analysis was conducted measuring the H2 and CO2 emission volume and performing electrochemical analysis (i.e. linear sweep voltammetry and chronoamperometry) to better understand the process. For the first time the influence of temperature on current density and H2 evolution was studied at temperatures ranging from ambient temperature (i.e. 19 ◦C) to 80 ◦C. The highest H2 volume was 12.1 mL which was produced by FeCl3 -mediated electrolysis of glucose at ambient temperature which was up to two times higher than starch lignin and cellulose at 1.20 V. Of the substrates examined glucose also showed a maximum power-to-H2 -yield ratio of 30.99 kWh/kg. The results showed that hydrogen can be produced from biomass feedstock at ambient temperature when a Lewis acid (FeCl3 ) is employed and with a higher yield rate and a lower electricity consumption compared to water electrolysis.
A Comparative Analysis of Different Hydrogen Production Methods and Their Environmental Impact
Nov 2023
Publication
This study emphasises the growing relevance of hydrogen as a green energy source in meeting the growing need for sustainable energy solutions. It foregrounds the importance of assessing the environmental consequences of hydrogen-generating processes for their long-term viability. The article compares several hydrogen production processes in terms of scalability costeffectiveness and technical improvements. It also investigates the environmental effects of each approach considering crucial elements such as greenhouse gas emissions water use land needs and waste creation. Different industrial techniques have distinct environmental consequences. While steam methane reforming is cost-effective and has a high production capacity it is coupled with large carbon emissions. Electrolysis a technology that uses renewable resources is appealing but requires a lot of energy. Thermochemical and biomass gasification processes show promise for long-term hydrogen generation but further technological advancement is required. The research investigates techniques for improving the environmental friendliness of hydrogen generation through the use of renewable energy sources. Its ultimate purpose is to offer readers a thorough awareness of the environmental effects of various hydrogen generation strategies allowing them to make educated judgements about ecologically friendly ways. It can ease the transition to a cleaner hydrogen-powered economy by considering both technological feasibility and environmental issues enabling a more ecologically conscious and climate-friendly energy landscape.
CFD Modeling and Experimental Validation of an Alkaline Water Electrolysis Cell for Hydrogen Production
Dec 2020
Publication
Although alkaline water electrolysis (AWE) is the most widespread technology for hydrogen production by electrolysis its electrochemical and fluid dynamic optimization has rarely been addressed simultaneously using Computational Fluid Dynamics (CFD) simulation. In this regard a two-dimensional (2D) CFD model of an AWE cell has been developed using COMSOL® software and then experimentally validated. The model involves transport equations for both liquid and gas phases as well as equations for the electric current conservation. This multiphysics approach allows the model to simultaneously analyze the fluid dynamic and electrochemical phenomena involved in an electrolysis cell. The electrical response was evaluated in terms of polarization curve (voltage vs. current density) at different operating conditions: temperature electrolyte conductivity and electrode-diaphragm distance. For all cases the model fits very well with the experimental data with an error of less than 1% for the polarization curves. Moreover the model successfully simulates the changes on gas profiles along the cell according to current density electrolyte flow rate and electrode-diaphragm distance. The combination of electrochemical and fluid dynamics studies provides comprehensive information and makes the model a promising tool for electrolysis cell design.
On the Future Relevance of Green Hydrogen in Europe
Jan 2024
Publication
Hydrogen is among the energy carriers which are most often considered for bringing about a sustainable energy system. Yet so far hydrogen has not delivered as an energy carrier. The core objective of this paper is to provide a comprehensive analysis of the state-of-the-art and the future prospects of green hydrogen in the European energy system from economic energetic and CO2 emissions point-of-view. The analysis shows that there are some increasing opportunities for hydrogen use in industry and in the transport sector when electrification is not possible or is too expensive as well as a storage in the European electricity system. However a hydrogen-based energy system will remain a vision at least over the next decades. The major reason for this is the unfavorable economics mostly due to high investment costs in the whole supply chain. In addition the overall efficiencies in the hydrogen chains are moderate in general. The full environmental benignity of hydrogen as an energy carrier is only provided when renewable energy sources are used for hydrogen production. However in Europe the potentials for green hydrogen are very limited due to the insufficient expansion of renewable electricity generation. For this reason many European countries are considering options for green hydrogen import. The future of hydrogen is highly dependent on the supporting policy framework. To reduce the risk in the investment in hydrogen infrastructure as well as to justify the promotion of green hydrogen it is very important that Europe works out a very clear and realistic long-term implementation strategy.
Integration of Microgrids in Chemical Industries with Hydrogen as a Byproduct: Styrene Production Case Study
Feb 2024
Publication
The chemical industry serves as a global economic backbone and it is an intensive consumer of conventional energy. Due to the depletion of fossil fuels and the emission of greenhouse gases it is necessary to analyze energy supply solutions based on renewable energy sources in this industrial sector. Unlike other sectors such as residential or service industries which have been thoroughly analyzed by the scientific community the use of renewable energies in the chemical industry remains comparatively less examined by the scientific community. This article studies the use of an energy supply system based on photovoltaic technology or a PEM fuel cell for a styrene production industry analyzing the integration of energy storage systems such as batteries as well as different uses for the surplus hydrogen produced by the facility. The most interesting conclusions of the article are: (1) the renewable microgrid considered is viable both technically and economically with a discounted payback period between 5.4 and 6.5 years using batteries as an energy storage system; and (2) the use of hydrogen as energy storage system for a styrene industry is not yet a viable option from an economic point of view.
Modelling Flexibility Requirements in Deep Decarbonisation Scenarios: The Role of Conventional Flexibility and Sector Coupling Options in the European 2050 Energy System
Feb 2024
Publication
Russia’s invasion of Ukraine has reaffirmed the importance of scaling up renewable energy to decarbonise Europe’s economy while rapidly reducing its exposure to foreign fossil fuel suppliers. Therefore the question of sources of flexibility to support a fully decarbonised European energy system is becoming even more critical in light of a renewable-dominated energy system. We developed and used a Pan-European energy system model to systematically assess and quantify sources of flexibility to meet deep decarbonisation targets. The electricity supply sector and electricity-based end-use technologies are crucial in achieving deep decarbonisation. Other low-carbon energy sources like biomethane hydrogen synthetic e-fuels and bioenergy with carbon capture and storage will also play a role. To support a fully decarbonised European energy system by 2050 both temporal and spatial flexibility will be needed. Spatial flexibility achieved through investments in national electricity networks and cross-border interconnections is crucial to support the aggressive roll-out of variable renewable energy sources. Cross-border trade in electricity is expected to increase and in deep decarbonisation scenarios the electricity transmission capacity will be larger than that of natural gas. Hydrogen storage and green hydrogen production will play a key role in providing traditional inter-seasonal flexibility and intraday flexibility will be provided by a combination of electrical energy storage hydrogen-based storage solutions (e.g. liquid H2 and pressurised storage) and hybrid heat pumps. Hydrogen networks and storage will become more critical as we move towards the highest decarbonisation scenario. Still the need for natural gas networks and storage will decrease substantially.
Assessment of Wind Energy Potential for the Production of Renewable Hydrogen in Sindh Province of Pakistan
Apr 2019
Publication
In this study we developed a new hybrid mathematical model that combines wind-speed range with the log law to derive the wind energy potential for wind-generated hydrogen production in Pakistan. In addition we electrolyzed wind-generated power in order to assess the generation capacity of wind-generated renewable hydrogen. The advantage of the Weibull model is that it more accurately reflects power generation potential (i.e. the capacity factor). When applied to selected sites we have found commercially viable hydrogen production capacity in all locations. All sites considered had the potential to produce an excess amount of wind-generated renewable hydrogen. If the total national capacity of wind-generated was used Pakistan could conceivably produce 51917000.39 kg per day of renewable hydrogen. Based on our results we suggest that cars and other forms of transport could be fueled with hydrogen to conserve oil and gas resources which can reduce the energy shortfall and contribute to the fight against climate change and global warming. Also hydrogen could be used to supplement urban energy needs (e.g. for Sindh province Pakistan) again reducing energy shortage effects and supporting green city programs.
Market-based Asset Valuation of Hydrogen Geological Storage
Jul 2023
Publication
Because of hydrogen's low energy density hydrogen storage is a critical component of the hydrogen economy particularly when large-scale and flexible hydrogen utilization is required. There is a sense of urgency to develop hydrogen geological storage projects to support large-scale yet flexible hydrogen utilization. This study aims to answer questions not yet resolved in the research literature discussing the valuation of hydrogen geological storage options for commercial development. This study establishes a net present value (NPV) evaluation framework for geological hydrogen storage that integrates the updated techno-economic analysis and market-based operations. The capital asset pricing model (CAPM) and the related finance theories are applied to determine the risk-adjusted discount rate in building the NPV evaluation framework. The NPV framework has been applied to two geological hydrogen storage projects a single-turn storage serving downstream transportation seasonal demand versus a multiturn storage as part of an integrated renewables-based hydrogen energy system providing peak electric load. From the NPV framework both projects have positive NPVs $46 560 632 and $12 457 546 respectively and International Rate of Return (IRR) values which are higher than the costs of capital. The NPV framework is also applied to the sensitivity analysis and shows that the hydrogen price spread between withdrawal and injection prices site development and well costs are the top three factors that impact both NPV and IRR the most for both projects. The established NPV framework can be used for project risk management by discovering the key cost drivers for the storage assets.
Optimal Parameter Determination of Membrane Bioreactor to Boost Biohydrogen Production-Based Integration of ANFIS Modeling and Honey Badger Algorithm
Jan 2023
Publication
Hydrogen is a new promising energy source. Three operating parameters including inlet gas flow rate pH and impeller speed mainly determine the biohydrogen production from membrane bioreactor. The work aims to boost biohydrogen production by determining the optimal values of the control parameters. The proposed methodology contains two parts: modeling and parameter estimation. A robust ANIFS model to simulate a membrane bioreactor has been constructed for the modeling stage. Compared with RMS thanks to ANFIS the RMSE decreased from 2.89 using ANOVA to 0.0183 using ANFIS. Capturing the proper correlation between the inputs and output of the membrane bioreactor process system encourages the constructed ANFIS model to predict the output performance exactly. Then the optimal operating parameters were identified using the honey badger algorithm. During the optimization process inlet gas flow rate pH and impeller speed are used as decision variables whereas the biohydrogen production is the objective function required to be maximum. The integration between ANFIS and HBA boosted the hydrogen production yield from 23.8 L to 25.52 L increasing by 7.22%.
Hydrogen, A Less Disruptive Pathway for Domestic Heat? Exploratory Findings from Public Perception Research
Aug 2023
Publication
The disruption associated with heat decarbonisation has been identified as a key opportunity for hydrogen technologies in temperate countries and regions where established distribution infrastructure and familiarity with natural gas boilers predominate. A key element of such claims is the empirically untested belief that citizens will prefer to minimise disruption and perceive hydrogen to be less disruptive than the network upgrades and retrofit measures needed to support electric and other low carbon heating technologies. This article reports on exploratory deliberative research with residents of Cardiff Wales which examined public perceptions of heating disruptions. Our findings suggest that concerns over public responses to disruption may be overstated particularly as they relate to construction and road excavation for network upgrade. Disruptions arising from permanent changes to building fabric may be more problematic for heat pump retrofit however these may be greatly overshadowed by anxieties over the cost implications of moving to hydrogen fuel. Furthermore the biographical patterning of citizen preferences raises significant questions for hydrogen roll-out strategies relying on regionalised network conversion. We conclude by arguing that far from a non-disruptive alternative to electrification hydrogen risks being seen as posing substantial disruptions to precarious household finances and lifestyles.
Comparing Alternative Pathways for the Future Role of the Gas Grid in a Low-carbon Heating System
Aug 2023
Publication
This paper uses a whole-system approach to examine different strategies related to the future role of the gas grid in a low-carbon heat system. A novel model of integrated gas electricity and heat systems HEGIT is used to investigate four key sets of scenarios for the future of the gas grid using the UK as a case study: (a) complete electrification of heating; (b) conversion of the existing gas grid to deliver hydrogen; (c) a hybrid heat pump system; and (d) a greener gas grid. Our results indicate that although the infrastructure requirements the fuel or resource mix and the breakdown of costs vary significantly over the complete electrification to complete conversion of the gas grid to hydrogen spectrum the total system transition cost is relatively similar. This reduces the significance of total system cost as a guiding factor in policy decisions on the future of the gas grid. Furthermore we show that determining the roles of low-carbon gases and electrification for decarbonising heating is better guided by the trade-offs between short- and long-term energy security risks in the system as well as trade-offs between consumer investment in fuel switching and infrastructure requirements for decarbonising heating. Our analysis of these trade-offs indicates that although electrification of heating using heat pumps is not the cheapest option to decarbonise heat it has clear co-benefits as it reduces fuel security risks and dependency on carbon capture and storage infrastructure. Combining different strategies such as grid integration of heat pumps with increased thermal storage capacity and installing hybrid heat pumps with gas boilers on the consumer side are demonstrated to effectively moderate the infrastructure requirements consumer costs and reliability risks of widespread electrification. Further reducing demand on the electricity grid can be accomplished by complementary options at the system level such as partial carbon offsetting using negative emission technologies and partially converting the gas grid to hydrogen.
A Short Review on Ni Based Catalysts and Related Engineering Issues for Methane Steam Reforming
Mar 2020
Publication
Hydrogen is an important raw material in chemical industries and the steam reforming of light hydrocarbons (such as methane) is the most used process for its production. In this process the use of a catalyst is mandatory and if compared to precious metal-based catalysts Ni-based catalysts assure an acceptable high activity and a lower cost. The aim of a distributed hydrogen production for example through an on-site type hydrogen station is only reachable if a novel reforming system is developed with some unique properties that are not present in the large-scale reforming system. These properties include among the others (i) daily startup and shutdown (DSS) operation ability (ii) rapid response to load fluctuation (iii) compactness of device and (iv) excellent thermal exchange. In this sense the catalyst has an important role. There is vast amount of information in the literature regarding the performance of catalysts in methane steam reforming. In this short review an overview on the most recent advances in Ni based catalysts for methane steam reforming is given also regarding the use of innovative structured catalysts.
Comprehensive Review of Geomechanics of Underground Hydrogen Storage in Depleted Reservoirs and Salt Caverns
Sep 2023
Publication
Hydrogen is a promising energy carrier for a low-carbon future energy system as it can be stored on a megaton scale (equivalent to TWh of energy) in subsurface reservoirs. However safe and efficient underground hydrogen storage requires a thorough understanding of the geomechanics of the host rock under fluid pressure fluctuations. In this context we summarize the current state of knowledge regarding geomechanics relevant to carbon dioxide and natural gas storage in salt caverns and depleted reservoirs. We further elaborate on how this knowledge can be applied to underground hydrogen storage. The primary focus lies on the mechanical response of rocks under cyclic hydrogen injection and production fault reactivation the impact of hydrogen on rock properties and other associated risks and challenges. In addition we discuss wellbore integrity from the perspective of underground hydrogen storage. The paper provides insights into the history of energy storage laboratory scale experiments and analytical and simulation studies at the field scale. We also emphasize the current knowledge gaps and the necessity to enhance our understanding of the geomechanical aspects of hydrogen storage. This involves developing predictive models coupled with laboratory scale and field-scale testing along with benchmarking methodologies.
Energy Use and Greenhouse Gas Emissions of Traction Alternatives for Regional Railways
Feb 2024
Publication
This paper presents a method for estimating Well-to-Wheel (WTW) energy use and greenhouse gas (GHG) emissions attributed to the advanced railway propulsion systems implemented in conjunction with different energy carriers and their production pathways. The analysis encompasses diesel-electric multiple unit vehicles converted to their hybrid-electric plug-in hybrid-electric fuel cell hybrid-electric or battery-electric counterparts combined with biodiesel or hydrotreated vegetable oil (HVO) as the first and second generation biofuels liquefied natural gas (LNG) hydrogen and/or electricity. The method is demonstrated using non-electrified regional railway network with heterogeneous vehicle fleet in the Netherlands as a case. Battery-electric system utilizing green electricity is identified as the only configuration leading to emission-free transport while offering the highest energy use reduction by 65–71% compared to the current diesel-powered hybrid-electric system. When using grey electricity based on the EU2030 production mix these savings are reduced to about 27–39% in WTW energy use and around 68–73% in WTW GHG emissions. Significant reductions in overall energy use and emissions are obtained for the plug-in hybrid-electric concept when combining diesel LNG or waste cooking oil-based HVO with electricity. The remaining configurations that reduce energy use and GHG emissions are hybrid-electric systems running on LNG or HVO from waste cooking oil. The latter led to approximately 88% lower WTW emissions than the baseline for each vehicle type. When produced from natural gas or EU2030-mix-based electrolysis hydrogen negatively affected both aspects irrespective of the prime mover technology. However when produced via green electricity it offers a GHG reduction of approximately 90% for hybrid-electric and fuel cell hybrid-electric configurations with a further reduction of up to 92–93% if combined with green electricity in plug-in hybrid-electric systems. The results indicate that HVO from waste cooking oil could be an effective and instantly implementable transition solution towards carbon–neutral regional trains allowing for a smooth transition and development of supporting infrastructure required for more energy-efficient and environment-friendly technologies.
3E Analysis of a Virtual Hydrogen Valley Supported by Railway-based H2 Delivery for Multi-transportation Service
Nov 2023
Publication
In Southern Italy near the Mediterranean Sea mobility services like cars bicycles scooters and materialhandling forklifts are frequently required in addition to multimodal local transportation services such as trains ferry boats and airplanes. This research proposes an innovative concept of hydrogen valley virtually simulated in Matlab/Simulink environment located in Calabria. As a novelty hydrogen is produced centrally and delivered via fuel cell hybrid trains to seven hydrogen refueling stations serving various mobility hubs. The centralized production facility operates with a nominal capacity of about 4 tons/day producing hydrogen via PEM electrolysis and storing hydrogen at 200 bar with a hydrogen compressor. As the size of vehicle fleets and the cost of acquiring renewable energy through power purchase agreements vary the hydrogen valley is examined from both a technical and an economic perspective analyzing: the values of the levelized cost of hydrogen the energy consumption and the energy efficiency of the energy systems. Specifically the levelized cost of hydrogen reached competitive values close to 5 €/kg of hydrogen under the most optimistic scenarios with fleet conversions of more than 60 % and a power purchase agreement price lower than 150 €/MWh. Then the benefits of hydrogen rail transport in terms of emissions reduction and health from an economic standpoint are compared to conventional diesel trains and fully electric trains saving respectively 3.2 ktons/year and 0.4 ktons/year of carbon dioxide equivalent emissions and corresponding economic benefits of respectively 51 and 0.548 million euros.
Palladium-alloy Membrane Reactors for Fuel Reforming and Hydrogen Production: Hydrogen Production Modelling
Jul 2023
Publication
Endeavors have recently been concentrated on minimizing the dependency on fossil fuels in order to mitigate the ever-increasing problem of greenhouse gas (GHG) emissions. Hydrogen energy is regarded as an alternative to fossil fuels due to its cleaner emission attributes. Reforming of hydrocarbon fuels is amongst the most popular and widely used methods for hydrogen production. Hydrogen produced from reforming processes requires additional processes to separate from the reformed gases. In some cases further purification of hydrogen has to be carried out to use the hydrogen in power generation applications. Metallic membranes especially palladium (Pd)-based ones have demonstrated sustainable hydrogen separation potential with around 99.99% hydrogen purity. Comprehensive and critical research investigations must be performed to optimize membrane-assisted reforming as well as to maximize the production of hydrogen. The computational fluid dynamic (CFD) can be an excellent tool to analyze and visualize the flow/reaction/permeation mechanisms at a lower cost in contrast with the experiments. In order to provide the necessary background knowledge on membrane reactor modeling this study reviews summarizes and analyses the kinetics of different fuel reforming processes equations to determine hydrogen permeation and lastly various geometry and operating condition adopted in the literature associated with membrane-reactor modeling works. It is indicated that hydrogen permeation through Pd-membranes depends highly on the difference in hydrogen pressure. It is found that hydrogen permeation can be improved by employing different pressure configuration introducing sweep flow on the permeate side of the membrane reducing retentate side flow rate and increasing the temperature.
Exploring Decentralized Ammonia Synthesis for Hydrogen Storage and Transport: A Comprehensive CFD Investigation with Experimental Validation and Parametric Study
Sep 2023
Publication
Hydrogen energy plays a vital role in the transition towards a carbon-neutral society but faces challenges in storage and transport as well as in production due to fluctuations in renewable electricity generation. Ammonia (NH3 ) as a carbon-neutral hydrogen carrier offers a promising solution to the energy storage and transport problem. To realize its potential and support the development of a hydrogen economy exploring NH3 synthesis in a decentralized form that integrates with distributed hydrogen production systems is highly needed. In this study a computational fluid dynamics (CFD) model for the Ruthenium (Ru) catalysts-based Haber– Bosch reactor is developed. First a state-of-the-art kinetic model comprehensively describing the complex catalytic reaction is assessed for its sensitivity and applicability to temperature pressure and conversion. Then the kinetic model is integrated into the CFD model and its accuracy is verified through comparison with experimental data obtained from different Ru-based catalysts and operation conditions. Detailed CFD results for a given case are presented offering a visual understanding of thermal gradients and species distributions inside the reactor. Finally a CFD-based parametric study is performed to reveal the impacts of key operation parameters and optimize the NH3 synthesis reactor. The results show that the NH3 production rate is predominantly influenced by temperature with a two-fold difference observed for every 30 ◦C variation while pressure primarily affects the equilibrium. Additionally the affecting mechanism of space velocity is thoroughly discussed and the best value for efficient NH3 synthesis is found to be 180000 h−1. In conclusion the CFD model and simulation results provide valuable insights for the design and control of decentralized NH3 synthesis reactor and operation contributing to the advancement of sustainable energy technologies.
Optimal Siting and Sizing of Hydrogen Production Modules in Distribution Networks with Photovoltaic Uncertainties
Nov 2023
Publication
Hydrogen production modules (HPMs) play a crucial role in harnessing abundant photovoltaic power by producing and supplying hydrogen to factories resulting in significant operational cost reductions and efficient utilization of the photovoltaic panel output. However the output of photovoltaic power is stochastic which will affect the revenue of investing in an HPM. This paper presents a comprehensive analysis of HPMs starting with the modeling of their operational process and investigating their influence on distribution system operations. Building upon these discussions a deterministic optimization model is established to address the corresponding challenges. Furthermore a two-stage stochastic planning model is proposed to determine optimal locations and sizes of HPMs in distribution systems accounting for uncertainties. The objective of the twostage stochastic planning model is to minimize the distribution system’s operational costs plus the investment costs of the HPM subject to power flow constraints. To tackle the stochastic nature of photovoltaic power a data-driven algorithm is introduced to cluster historical data into representative scenarios effectively reducing the planning model’s scale. To ensure an efficient solution a Benders’ decomposition-based algorithm is proposed which is an iterative method with a fast convergence speed. The proposed model and algorithms are validated using a widely utilized IEEE 33-bus system through numerical experiments demonstrating the optimality of the HPM plan generated by the algorithm. The proposed model and algorithms offer an effective approach for decision-makers in managing uncertainties and optimizing HPM deployment paving the way for sustainable and efficient energy solutions in distribution systems. Sensitivity analysis verifies the optimality of the HPM’s siting and sizing obtained by the proposed algorithm which also reveals immense economic and environmental benefits.
Roles of Bioenergy and Green Hydrogen in Large Scale Energy Storage for Carbon Neutrality
Aug 2023
Publication
A new technical route to incorporate excess electricity (via green hydrogen generation by electrolysis) into a biorefinery to produce modern bioenergy (advanced biofuels) is proposed as a promising alternative. This new route involves storing hydrogen for mobile and stationary applications and can be a three-bird-one-stone solution for the storage of excess electrical energy storage of green hydrogen and high-value utilization of biomass.
A Systems-Level Study of Ammonia and Hydrogen for Maritime Transport
Aug 2023
Publication
An energy systems comparison of grid-electricity derived liquid hydrogen (LH2) and liquid ammonia (LNH3) is conducted to assess their relative potential in a low-carbon future. Under various voyage weather conditions their performance is analysed for use in cargo transport energy vectors for low-carbon electricity transport and fuel supply. The analysis relies on literature projections for technological development and grid decarbonisation towards 2050. Various voyages are investigated from regions such as North America (NA) Europe (E) and Latin America (LA) to regions projected to have a higher electricity and fuel grid carbon intensity (CI) (i.e. Asia Pacific Africa the Middle-East and the CIS). In terms of reducing the CI of electricity and fuel at the destination port use of LH2 is predicted to be favourable relative to LNH3 whereas LNH3 is favourable for low-carbon transport of cargo. As targeted by the International Maritime Organisation journeys of LNH3 cargo ships originating in NA E and LA achieve a reduction in volumetric energy efficiency design index (kg-CO2/m3 -km) of at least 70% relative to 2008 levels. The same targets can be met globally if LH2 is supplied to high CI regions for production of LNH3 for cargo transport. A future shipping system thus benefits from the use of both LH2 and LNH3 for different functions. However there are additional challenges associated with the use of LH2. Relative to LNH3 1.6 to 1.7 times the number of LH2 ships are required to deliver the same energy. Even when reliquefaction is employed their success is reliant on the avoidance of rough sea states (i.e. Beaufort Numbers >= 6) where fuel depletion rates during a voyage are impractical.
Linking Cost Decline and Demand Surge in the Hydrogen Market: A Case Study in China
Jun 2023
Publication
Hydrogen is crucial in achieving global energy transition and carbon neutrality goals. Existing market estimates typically presume linear or exponential growth but fail to consider how market demand responds to the declining cost of underlying technologies. To address this this study utilizes a learning curve model to project the cost of electrolyzers and its subsequent impact on hydrogen market aligning with a premise that the market demand is proportional to the cost of hydrogen. In a case study of China’s hydrogen market projecting from 2020 to 2060 we observed substantial differences in market evolution compared to exponential growth scenarios. Contrary to exponential growth scenarios China’s hydrogen market experiences faster growth during the 2020–2040 period rather than later. Such differences underscore the necessity for proactive strategic planning in emerging technology markets particularly for those experiencing rapid cost decline such as hydrogen. The framework can also be extended to other markets by using local data providing valuable insights to investors policymakers and developers engaged in the hydrogen market.
Optimal Design and Sizing of Hybrid Photovoltaic/Fuel Cell Electrical Power System
Aug 2023
Publication
Renewable energy solutions play a crucial role in addressing the growing energy demands while mitigating environmental concerns. This study examines the techno-economic viability and sensitivity of utilizing solar photovoltaic/polymer electrolyte membrane (PEM) fuel cells (FCs) to meet specific power demands in NEOM Saudi Arabia. The novelty of this study lies in its innovative approach to analyzing and optimizing PV/PEMFC systems aiming to highlight their economic feasibility and promote sustainable development in the region. The analysis focuses on determining the optimal size of the PV/PEMFC system based on two critical criteria: minimum cost of energy (COE) and minimum net present cost (NPC). The study considers PEMFCs with power ratings of 30 kW 40 kW and 50 kW along with four PV panel options: Jinko Solar Powerwave Tindo Karra and Trina Solar. The outcomes show that the 30 kW PEMFC and the 201 kW Trina Solar TSM-430NEG9R.28 are the most favorable choices for the case study. Under these optimal conditions the study reveals the lowest values for NPC at USD 703194 and COE at USD 0.498 per kilowatt-hour. The levelized cost of hydrogen falls within the range of USD 15.9 to 23.4 per kilogram. Furthermore replacing the 30 kW Trina solar panel with a 50 kW Tindo PV module results in a cost reduction of 32%. The findings emphasize the criticality of choosing optimal system configurations to attain favorable economic outcomes thereby facilitating the adoption and utilization of renewable energy sources in the region. In conclusion this study stands out for its pioneering and thorough analysis and optimization of PV/PEMFC systems providing valuable insights for sustainable energy planning in NEOM Saudi Arabia.
Safety Risk and Strategy Analysis of On-Board Hydrogen System of Hydrogen Fuel Cell Vehicles in China
Nov 2023
Publication
Hydrogen fuel cell vehicles (HFCVs) represent an important breakthrough in the hydrogen energy industry. The safe utilization of hydrogen is critical for the sustainable and healthy development of hydrogen fuel cell vehicles. In this study risk factors and preventive measures are proposed for on-board hydrogen systems during the process of transportation storage and use of fuel cell vehicles. The relevant hydrogen safety standards in China are also analyzed and suggestions involving four safety strategies and three safety standards are proposed.
HyDeploy2 - Gas Network Innovation Competition: Cadent 5th Project Progress Report
Jan 2024
Publication
The HyDeploy2 project seeks to address a key issue for UK energy customers: how to reduce the carbon they emit in heating their homes. The UK has a world class gas grid delivering heat conveniently and safely to more than 83% of homes. Emissions can be reduced by lowering the carbon content of gas through blending with hydrogen. This delivers carbon savings without customers requiring disruptive and expensive changes in their homes. It also provides the platform for deeper carbon savings by enabling wider adoption of hydrogen across the energy system.
Effects of Surface Modification on a Proton Exchange Membrane for Improvements in Green Hydrogen Production
Oct 2023
Publication
Proton Exchange Membrane (PEM) electrolysis an advanced technique for producing hydrogen with efficiency and environmental friendliness signifies the forefront of progress in this domain. Compared to alkaline cells these electrolytic cells offer numerous advantages such as lower operating temperatures enhanced hydrogen production efficiency and eliminating the need for an aqueous solution. However PEM electrolysis still faces limitations due to the high cost of materials used for the membrane and catalysts resulting in elevated expenses for implementing large-scale systems. The pivotal factor in improving PEM electrolysis lies in the Platinum catalyst present on the membrane surface. Enhancing catalytic efficiency through various methods and advancements holds immense significance for the progress of this technology. This study investigates the use of patterned membranes to improve the performance of PEM electrolytic cells toward green hydrogen production. By increasing the Platinum loading across the membrane surface and enhancing catalytic performance these patterned membranes overcome challenges faced by conventionally fabricated counterparts. The findings of this research indicate that membranes with modified surfaces not only exhibit higher current draw but also achieve elevated rates of hydrogen production.
Hydrogen-Powered Aircraft at Airports: A Review of the Infrastructure Requirements and Planning Challenges
Nov 2023
Publication
Hydrogen-fueled aircraft are a promising innovation for a sustainable future in aviation. While hydrogen aircraft design has been widely studied research on airport requirements for new infrastructure associated with hydrogen-fueled aircraft and its integration with existing facilities is scarce. This study analyzes the current body of knowledge and identifies the planning challenges which need to be overcome to enable the operation of hydrogen flights at airports. An investigation of the preparation of seven major international airports for hydrogen-powered flights finds that although there is commitment airports are not currently prepared for hydrogen-based flights. Major adjustments are required across airport sites covering land use plans airside development utility infrastructure development and safety security and training. Developments are also required across the wider aviation industry including equipment updates such as for refueling and ground support and supportive policy and regulations for hydrogen-powered aircraft. The next 5–10 years is identified from the review as a critical time period for airports given that the first commercial hydrogen-powered flight is likely to depart in 2026 and that the next generation of short-range hydrogen-powered aircraft is predicted to enter service between 2030 and 2035.
Review of Next Generation Hydrogen Production from Offshore Wind Using Water Electrolysis
Dec 2023
Publication
Hydrogen produced using renewable energy from offshore wind provides a versatile method of energy storage and power-to-gas concepts. However few dedicated floating offshore electrolyser facilities currently exist and therefore conditions of the offshore environment on hydrogen production cost and efficiency remain uncertain. Therefore this review focuses on the conversion of electrical energy to hydrogen using water electrolysis located in offshore areas. The challenges associated with the remote locations fluctuating power and harsh conditions are highlighted and recommendations for future electrolysis system designs are suggested. The latest research in polymer electrolyte membrane alkaline and membraneless electrolysis are evaluated in order to understand their capital costs efficiency and current research status for achieving scaled manufacturing to the GW scale required in the next three decades. Operating fundamentals that govern the performance of each device are investigated and future recommendations of research specifically for the integration of water electrolysers with offshore wind turbines is presented.
The Potential of Hydrogen-battery Storage Systems for a Sustainable Renewable-based Electrification of Remote Islands in Norway
Oct 2023
Publication
Remote locations and off-grid regions still rely mainly on diesel generators despite the high operating costs and greenhouse gas emissions. The exploitation of local renewable energy sources (RES) in combination with energy storage technologies can be a promising solution for the sustainable electrification of these areas. The aim of this work is to investigate the potential for decarbonizing remote islands in Norway by installing RES-based energy systems with hydrogen-battery storage. A national scale assessment is presented: first Norwegian islands are characterized and classified according to geographical location number of inhabitants key services and current electrification system. Then 138 suitable installation sites are pinpointed through a multiple-step sorting procedure and finally 10 reference islands are identified as representative case studies. A site-specific methodology is applied to estimate the electrical load profiles of all the selected reference islands. An optimization framework is then developed to determine the optimal system configuration that minimizes the levelized cost of electricity (LCOE) while ensuring a reliable 100% renewable power supply. The LCOE of the RES-based energy systems range from 0.21 to 0.63 €/kWh and a clear linear correlation with the wind farm capacity factor is observed (R2 equal to 0.87). Hydrogen is found to be crucial to prevent the oversizing of the RES generators and batteries and ensure long-term storage capacity. The techno-economic feasibility of alternative electrification strategies is also investigated: the use of diesel generators is not economically viable (0.87–1.04 €/kWh) while the profitability of submarine cable connections is highly dependent on the cable length and the annual electricity consumption (0.14–1.47 €/kWh). Overall the cost-effectiveness of RES-based energy systems for off-grid locations in Northern Europe can be easily assessed using the correlations derived in this analysis.
H2 URESONIC: Design of a Solar-Hydrogen University Renewable Energy System for a New and Innovative Campus
Feb 2024
Publication
The necessity to move to sustainable energy solutions has inspired an investigation of innovative technologies for satisfying educational institutions’ sustainable energy needs. The possibility of a solar-hydrogen storage system and its integration into university energy management is investigated in this article. The study opens by providing context noting the growing relevance of renewable energy in universities as well as the necessity for effective energy storage systems. The goal is to delve into solar-hydrogen technology outlining its components operating mechanism and benefits over typical storage systems. The chapter on Integration Design examines current university energy infrastructure identifies problems and provides ways for integrating solar-hydrogen systems seamlessly. This integration relies heavily on technological and economic considerations such as a cost-benefit analysis and scalability studies. Case studies include real-world examples performance measurements and significant insights learned from successful implementations. The chapter Future Prospects investigates new trends in solar-hydrogen technology as well as the impact of government legislation providing a forward-looking viewpoint for colleges considering adoption. The report concludes with a summary of significant findings emphasizing the benefits of solar-hydrogen integration and making recommendations for future implementations. The limitation of this research is that it only focuses on design and simulation as a phase of preliminary study.
Development of Liquid Organic Hydrogen Carriers for Hydrogen Storage and Transport
Jan 2024
Publication
The storage and transfer of energy require a safe technology to mitigate the global environmental issues resulting from the massive application of fossil fuels. Fuel cells have used hydrogen as a clean and efficient energy source. Nevertheless the storage and transport of hydrogen have presented longstanding problems. Recently liquid organic hydrogen carriers (LOHCs) have emerged as a solution to these issues. The hydrogen storage technique in LOHCs is more attractive than those of conventional energy storage systems like liquefaction compression at high pressure and methods of adsorption and absorption. The release and acceptance of hydrogen should be reversible by LOHC molecules following favourable reaction kinetics. LOHCs comprise liquid and semi-liquid organic compounds that are hydrogenated to store hydrogen. These hydrogenated molecules are stored and transported and finally dehydrogenated to release the required hydrogen for supplying energy. Hydrogenation and dehydrogenation are conducted catalytically for multiple cycles. This review elaborates on the characteristics of different LOHC molecules based on their efficacy as energy generators. Additionally different catalysts used for both hydrogenation and dehydrogenation are discussed.
Experimental Evaluation of Dynamic Operating Concepts for Alkaline Water Electrolyzers Powered by Renewable Energy
Dec 2021
Publication
Synthetic current density profiles with wind and photovoltaic power characteristics were calculated by autoregressive-moving-average (ARMA) models for the experimental evaluation of dynamic operating concepts for alkaline water electrolyzers powered by renewable energy. The selected operating concepts included switching between mixed and split electrolyte cycles and adapting the liquid electrolyte volume flow rate depending on the current density. All experiments were carried out at a pressure of 7 bar a temperature of 60 °C and with an aqueous potassium hydroxide solution with 32 wt.% KOH as the electrolyte. The dynamic operating concepts were compared to stationary experiments with mixed electrolyte cycles and the experimental evaluation showed that the selected operating concepts were able to reduce the gas impurity compared to the reference operating conditions without a noticeable increase of the cell potential. Therefore the overall system efficiency and process safety could be enhanced by this approach.
Literature Review of Hydrogen Energy Systems and Renewable Energy Sources
Nov 2023
Publication
The role of hydrogen as a clean energy source is a promising but also a contentious issue. The global energy production is currently characterized by an unprecedented shift to renewable energy sources (RES) and their technologies. However the local and environmental benefits of such RES-based technologies show a wide variety of technological maturity with a common mismatch to local RES stocks and actual utilization levels of RES exploitation. In this literature review the collected documents taken from the Scopus database using relevant keywords have been organized in homogeneous clusters and are accompanied by the registration of the relevant studies in the form of one figure and one table. In the second part of this review selected representations of typical hydrogen energy system (HES) installations in realistic in-field applications have been developed. Finally the main concerns challenges and future prospects of HES against a multi-parametric level of contributing determinants have been critically approached and creatively discussed. In addition key aspects and considerations of the HES-RES convergence are concluded.
Hydrogen Storage Capacity of Salt Caverns and Deep Aquifers Versus Demand for Hydrogen Storage: A Case Study of Poland
Nov 2023
Publication
Geological structures in deep aquifers and salt caverns can play an important role in large-scale hydrogen storage. However more work needs to be done to address the hydrogen storage demand for zero-emission energy systems. Thus the aim of the article is to present the demand for hydrogen storage expressed in the number of salt caverns in bedded rock salt deposits and salt domes or the number of structures in deep aquifers. The analysis considers minimum and maximum hydrogen demand cases depending on future energy system configurations in 2050. The method used included the estimation of the storage capacity of salt caverns in bedded rock salt deposits and salt domes and selected structures in deep aquifers. An estimation showed a large hydrogen storage potential of geological structures. In the case of analyzed bedded rock salt deposits and salt domes the average storage capacity per cavern is 0.05–0.09 TWhH2 and 0.06–0.20 TWhH2 respectively. Hydrogen storage capacity in analyzed deep aquifers ranges from 0.016 to 4.46 TWhH2. These values indicate that in the case of the upper bound for storage demand there is a need for the 62 to 514 caverns depending on considered bedded rock salt deposits and salt domes or the 9 largest analyzed structures in deep aquifers. The results obtained are relevant to the discussion on the global hydrogen economy and the methodology can be used for similar considerations in other countries.
Performance Analysis of a Diabatic Compressed Air Energy Storage System Fueled with Green Hydrogen
Oct 2023
Publication
The integration of an increasing share of Renewable Energy Sources (RES) requires the availability of suitable energy storage systems to improve the grid flexibility and Compressed Air Energy Storage (CAES) systems could be a promising option. In this study a CO2 -free Diabatic CAES system is proposed and analyzed. The plant configuration is derived from a down-scaled version of the McIntosh Diabatic CAES plant where the natural gas is replaced with green hydrogen produced on site by a Proton Exchange Membrane electrolyzer powered by a photovoltaic power plant. In this study the components of the hydrogen production system are sized to maximize the self-consumption share of PV energy generation and the effect of the design parameters on the H2 -CAES plant performance are analyzed on a yearly basis. Moreover a comparison between the use of natural gas and hydrogen in terms of energy consumption and CO2 emissions is discussed. The results show that the proposed hydrogen fueled CAES can effectively match the generation profile and the yearly production of the natural gas fueled plant by using all the PV energy production while producing zero CO2 emissions.
Multiperiod Modeling and Optimization of Hydrogen-Based Dense Energy Carrier Supply Chains
Feb 2024
Publication
The production of hydrogen-based dense energy carriers (DECs) has been proposed as a combined solution for the storage and dispatch of power generated through intermittent renewables. Frameworks that model and optimize the production storage and dispatch of generated energy are important for data-driven decision making in the energy systems space. The proposed multiperiod framework considers the evolution of technology costs under different levels of promotion through research and targeted policies using the year 2021 as a baseline. Furthermore carbon credits are included as proposed by the 45Q tax amendment for the capture sequestration and utilization of carbon. The implementation of the mixed-integer linear programming (MILP) framework is illustrated through computational case studies to meet set hydrogen demands. The trade-offs between different technology pathways and contributions to system expenditure are elucidated and promising configurations and technology niches are identified. It is found that while carbon credits can subsidize carbon capture utilization and sequestration (CCUS) pathways substantial reductions in the cost of novel processes are needed to compete with extant technology pathways. Further research and policy push can reduce the levelized cost of hydrogen (LCOH) by upwards of 2 USD/kg.
The Roadmap for a Green Hydrogen Economy in Trinidad & Tobago
Nov 2022
Publication
This publication presents the results of a pre-feasibility study to introduce a green hydrogen (GH2) market in Trinidad and Tobago (T&T). The study analyzed the potential supply and competitiveness of producing GH2 in T&T and the actions needed to build a foundation for producing green ammonia and methanol. The study updated previous estimates of renewable energy generation potential in the country. The study also highlighted Trinidad and Tobago's comparative advantage to produce GH2 with its ability to capitalize on existing infrastructure its know-how and capabilities and its long-standing trade relations. Lastly the study identifies demonstration projects and created a roadmap for developing a low carbon hydrogen economy in Trinidad and Tobago.
Renewable Hydrogen Requirements and Impacts for Network Balancing: A Queensland Cae Study
Dec 2023
Publication
Hydrogen is the gas of the moment: an abundant element that can be created using renewable energy transported in gaseous or liquid form and offering the ability to provide energy with only water vapour as an emission. Hydrogen can also be used in a fuel blend in electricity generation gas turbines providing a low carbon option for providing the peak electricity to cover high demand and firming.<br/>While the electricity grid is itself transforming to decarbonising hard-to-abate industries such as cement and bauxite refineries are slower to reduce emissions constrained by their high temperature process requirements. Hydrogen offers a solution allowing onsite production process heat with waste heat recovery supporting blended gas turbine generation for onsite electricity supply.<br/>This article builds on decarbonisation pathway simulation results from an ANEM model of the electricity grid identifying the amount of peak demand energy required from gas turbines. The research then examines the quantity flow rate storage requirements and emissions reduction if this peak generation were supplied by open cycle hydrogen capable gas turbines.
Techno-economic Analysis of the Effect of a Novel Price-based Control System on the Hydrogen Production of an Offshore 1.5 GW Wind-hydrogen System
Feb 2024
Publication
The cost of green hydrogen production is very dependent on the price of electricity. A control system that can schedule hydrogen production based on forecast wind speed and electricity price should therefore be advantageous for large-scale wind-hydrogen systems. This work presents a novel price-based control system integrated in a techno-economic analysis of hydrogen production from offshore wind. A polynomial regression model that predicts wind power production from wind speed input was developed and tested with real-world datasets from a 2.3 MW floating offshore wind turbine. This was combined with a mathematical model of a PEM electrolyzer and used to simulate hydrogen production. A novel price-based control system was developed to decide when the system should produce hydrogen and when it should sell electricity to the grid. The model and control system can be used in real-world wind-hydrogen systems and require only the forecast wind speed electricity price and selling price of hydrogen as inputs. 11 test scenarios based on 10 years of real-world wind speed and electricity price data are proposed and used to evaluate the effect the price-based control system has on the levelized cost of hydrogen (LCOH). Both current and future (2050) costs and technologies are used and the results show that the novel control system lowered the LCOH in all scenarios by 10–46%. The lowest LCOH achieved with current technology and costs was 6.04 $/kg H2. Using the most optimistic forecasts for technology improvements and cost reductions in 2050 the model estimated a LCOH of 0.96 $/kg H2 for a grid-connected offshore wind farm and onshore hydrogen production 0.82 $/kg H2 using grid electricity (onshore) and 4.96 $/kg H2 with an offgrid offshore wind-hydrogen system. When the electricity price from the period 2013–2022 was used on the 2050 scenarios the resulting LCOH was approximately twice as high.
Hazard Identification of Hydrogen-Based Alternative Fuels Onboard Ships
Dec 2023
Publication
It is essential to use alternative fuels if we are to reach the emission reduction targets set by the IMO. Hydrogen carriers are classified as zero-emission while having a higher energy density (including packing factor) than pure hydrogen. They are often considered as safe alternative fuels. The exact definition of what safety entails is often lacking both for hydrogen carriers as well as for ship safety. The aim of this study is to review the safety of hydrogen carriers from two perspectives investigating potential connections between the chemical and maritime approaches to safety. This enables a reasoned consideration between safety aspects and other design drivers in ship design and operation. The hydrogen carriers AB NaBH4 KBH4 and two LOHCs (NEC and DBT) are taken into consideration together with a couple reference fuels (ammonia methanol and MDO). After the evaluation of chemical properties related to safety and the scope of the current IMO safety framework it can be concluded that safety remains a vague and non-explicit concept from both perspectives. Therefore further research is required to prove the safe application of hydrogen carriers onboard ships.
OIES Podcast - Key Energy Themes for 2024
Jan 2024
Publication
In this latest OIES podcast James Henderson talks to Bill Farren-Price the new Head of the Gas Programme about some of Key Themes identified by OIES research fellows for 2024. After a review of the outcomes from 2023 we look at the oil and gas markets and discuss a common theme around the contrast between the fundamental tightness in both markets compared with the relative softness of prices. We then move onto a number of energy transition issues starting with some of the key actions from COP28 that need to be implemented in 2024 and following with a review of the outlook for carbon markets hydrogen developments and offshore wind. We also consider the impact of emerging competition between regions over green industrial policy. Finally we consider some of the key geopolitical drivers for 2024 with the influence of China being the most critical. However in an election year for so many countries it will be critical to follow the key policy announcements of the main candidates and of most critically the outcome of the US election in November.
The podcast can be found on their website
The podcast can be found on their website
Recent Developments in Materials for Physical Hydrogen Storage: A Review
Jan 2024
Publication
The depletion of reliable energy sources and the environmental and climatic repercussions of polluting energy sources have become global challenges. Hence many countries have adopted various renewable energy sources including hydrogen. Hydrogen is a future energy carrier in the global energy system and has the potential to produce zero carbon emissions. For the non-fossil energy sources hydrogen and electricity are considered the dominant energy carriers for providing end-user services because they can satisfy most of the consumer requirements. Hence the development of both hydrogen production and storage is necessary to meet the standards of a “hydrogen economy”. The physical and chemical absorption of hydrogen in solid storage materials is a promising hydrogen storage method because of the high storage and transportation performance. In this paper physical hydrogen storage materials such as hollow spheres carbon-based materials zeolites and metal– organic frameworks are reviewed. We summarize and discuss the properties hydrogen storage densities at different temperatures and pressures and the fabrication and modification methods of these materials. The challenges associated with these physical hydrogen storage materials are also discussed.
An Overview of Hydrogen’s Application for Energy Purposes in Lithuania
Nov 2023
Publication
Hydrogen has emerged as a promising climate-neutral energy carrier able to facilitate the processes of the European Union (EU) energy transition. Green hydrogen production through the electrolysis process has gained increasing interest recently for application in various sectors of the economy. As a result of the increasing renewable energy developments in the EU hydrogen is seen as one of the most promising solutions for energy storage challenges; therefore the leading countries in the energy sector are heavily investing in research of the technical obstacles for hydrogen applications and assessment of the current hydrogen market which in turn leads to the acceleration of the upscaling of hydrogen production. The main objective of this article was to provide a comprehensive overview of various green hydrogen production transportation and industrial application technologies and challenges in Europe with a separate analysis of the situation in Lithuania. Various water electrolysis technologies and their production costs are investigated along with recent developments in storage and transportation solutions. In addition the performances and limitations of electrochemical processes are presented and analysed research trends in the field are discussed and possible solutions for performance and cost improvements are overviewed. This paper proposes a discussion of perspectives in terms of future applications and research directions.
Hydrogen-rich Fuel Combustion Characteristics of a Counter Dual-swirl Combustor at Fixed Power
Nov 2021
Publication
In order to reduce the emission of carbon dioxide gas turbine power station will expect to use more clean fuels in the future especially those like hydrogen. Hydrogen-rich fuel(syngas) combustion characteristics of the novel counter dual-swirl gas turbine combustor under fixed calorific value input were studied by experiment and numerical simulation. PIV and temperature rake were used respectively to obtain the velocity and temperature distribution in the combustion chamber. The turbulence model of Reynolds stress and the kinetic model of detailed chemical syngas combustion were used simultaneously in the computational simulations. Based on the obtained results it was found that there is a reasonable agreement between the numerical results and the experimental data. The analysis shows that the flow field and temperature field of the combustor were almost unaffected by the change of hydrogen content and shows a nearly identical distribution structure under all conditions with hydrogen content below 90%; but when the H2 content reaches 90% the above characteristic plots were significantly changed. As the H2 content in the fuel increases on the center line of the combustor the jet velocity of the fuel decreased the temperature of the gas flow increased the recovery coefficient of total pressure decreased and the temperature distribution at the combustor outlet became more uniform. In addition it is also found that the syngas turbine with the same output power consumed less fuel than the gas turbine with hydrocarbon fuel. This paper provides reference for the study of hydrogen-rich syngas turbine and the application of hydrogen-rich fuel in combustor of energy system.
The Race Between Hydrogen and Heat Pumps for Space and Water Heating: A Model-based Scenario Analysis
Nov 2023
Publication
This paper analyses different levels and means of the electrification of space and hot water heating using an explorative modelling approach. The analysis provides guidance to the ongoing discussion on favourable pathways for heating buildings and the role of secondary energy carriers such as hydrogen or synthetic fuels. In total 12 different scenarios were modelled with decarbonisation pathways until 2050 which cover all 27 member states of the European Union. Two highly detailed optimisation models were combined to cover the building stock and the upstream energy supply sector. The analysis shows that decarbonisation pathways for space and water heating based on large shares of heat pumps have at least 11% lower system costs in 2050 than pathways with large shares of hydrogen or synthetic fuels. This translates into system cost savings of around €70 bn. Heat pumps are cost-efficient in decentralised systems and in centralised district heating systems. Hence heat pumps should be the favoured option to achieve a cost-optimal solution for heating buildings. Accordingly the paper makes a novel and significant contribution to understanding suitable and cost-efficient decarbonisation pathways for space and hot water heating via electrification. The results of the paper can provide robust guidance for policymakers.
Current and Future Role of Natural Gas Supply Chains in the Transition to a Low-Carbon Hydrogen Economy: A Comprehensive Review on Integrated Natural Gas Supply Chain Optimisation Models
Nov 2023
Publication
Natural gas is the most growing fossil fuel due to its environmental advantages. For the economical transportation of natural gas to distant markets physical (i.e. liquefaction and compression) or chemical (i.e. direct and indirect) monetisation options must be considered to reduce volume and meet the demand of different markets. Planning natural gas supply chains is a complex problem in today’s turbulent markets especially considering the uncertainties associated with final market demand and competition with emerging renewable and hydrogen energies. This review study evaluates the latest research on mathematical programming (i.e. MILP and MINLP) as a decisionmaking tool for designing and planning natural gas supply chains under different planning horizons. The first part of this study assesses the status of existing natural gas infrastructures by addressing readily available natural monetisation options quantitative tools for selecting monetisation options and single-state and multistate natural gas supply chain optimisation models. The second part investigates hydrogen as a potential energy carrier for integration with natural gas supply chains carbon capture utilisation and storage technologies. This integration is foreseen to decarbonise systems diversify the product portfolio and fill the gap between current supply chains and the future market need of cleaner energy commodities. Since natural gas markets are turbulent and hydrogen energy has the potential to replace fossil fuels in the future addressing stochastic conditions and demand uncertainty is vital to hedge against risks through designing a responsive supply chain in the project’s early design stages. Hence hydrogen supply chain optimisation studies and the latest works on hydrogen–natural gas supply chain optimisation were reviewed under deterministic and stochastic conditions. Only quantitative mathematical models for supply chain optimisation including linear and nonlinear programming models were considered in this study to evaluate the effectiveness of each proposed approach.
No more items...