Applications & Pathways
Influence of Air Distribution on Combustion Characteristics of a Micro Gas Turbine Fuelled by Hydrogen-doped Methane
Nov 2021
Publication
Adding hydrogen to the fuel can change the combustion characteristics and greatly improve the pollutants emission for the gas turbine. The numerical method was adopted to study the combustion process in a counter-flow combustor of a 100 kW micro gas turbine using methane doped by hydrogen and various distribution schemes of air flow. The combustion characteristics and pollutant emissions were explored to ascertain the influence of air distribution based on solving the validated models. It was shown that as the amount of premixed air increased in the swirling gas the range of the recirculation region became larger and the range of the high-temperature zone in the combustion chamber gradually enlarged. When the amount of premixed air was 30% the outlet temperature distribution of the combustor was excellent and the average temperature was 1172 K. Moreover the concentration of NOX gradually increased and reached a maximum value of 23.46 ppm (@15% O2) as the premixed air increased in the range of the ratio less than 40%. It was reduced to 0.717 ppm (@15% O2) when the amount of premixed air increased to 50%. These findings may support the running of the micro gas turbine using the hybrid fuel of hydrogen and methane.
Techno-economic Assessment of a Hydrogen-based Islanded Microgrid in North-east
Feb 2023
Publication
Currently renewable energy-based generators are considered worldwide to achieve net zero targets. However the stochastic nature of renewable energy systems leads to regulation and control challenges for power system operators especially in remote and regional grids with smaller footprints. A hybrid system (i.e. solar wind biomass energy storage) could minimise this issue. Nevertheless the hybrid system is not possible to develop in many islands due to the limited land area geographical conditions and others. Hydrogen as a carrier of clean energy can be used in locations where the installation of extensive or medium-scale renewable energy facilities is not permissible due to population density geographical constraints government policies and regulatory issues. This paper presents a techno-economic assessment of designing a green hydrogen-based microgrid for a remote island in North-east Australia. This research work determines the optimal sizing of microgrid components using green hydrogen technology. Due to the abovementioned constraints the green hydrogen production system and the microgrid proposed in this paper are located on two separate islands. The paper demonstrates three cost-effective scenarios for green hydrogen production transportation and electricity generation. This work has been done using Hybrid Optimisation Model for Multiple Energy Resources or HOMER Pro simulation platform. Simulation results show that the Levelized Cost of Energy using hydrogen technology can vary from AU$0.37/kWh to AU$1.08/kWh depending on the scenarios and the variation of key parameters. This offers the potential to provide lower-cost electricity to the remote community. Furthermore the CO2 emission could be reduced by 1760777 kg/year if the renewable energy system meets 100% of the electricity demand. Additionally the sensitivity analysis in this paper shows that the size of solar PV and wind used for green hydrogen production can further be reduced by 50%. The sensitivity analysis shows that the system could experience AU$0.03/kWh lower levelized cost if the undersea cable is used to transfer the generated electricity between islands instead of hydrogen transportation. However it would require environmental approval and policy changes as the islands are located in the Great Barrier Reef.
A Numerical Investigation on De-NOx Technology and Abnormal Combustion Control for a Hydrogen Engine with EGR System
Sep 2020
Publication
The combustion emissions of the hydrogen-fueled engines are very clean but the problems of abnormal combustion and high NOx emissions limit their applications. Nowadays hydrogen engines use exhaust gas recirculation (EGR) technology to control the intensity of premixed combustion and reduce the NOx emissions. This study aims at improving the abnormal combustion and decreasing the NOx emissions of the hydrogen engine by applying a three-dimensional (3D) computational fluid dynamics (CFD) model of a single-cylinder hydrogen-fueled engine equipped with an EGR system. The results indicated that peak in-cylinder pressure continuously increased with the increase of the ignition advance angle and was closer to the top dead center (TDC). In addition the mixture was burned violently near the theoretical air–fuel ratio and the combustion duration was shortened. Moreover the NOx emissions the average pressure and the in-cylinder temperature decreased as the EGR ratio increased. Furthermore increasing the EGR ratio led to an increase in the combustion duration and a decrease in the peak heat release rate. EGR system could delay the spontaneous combustion reaction of the end-gas and reduce the probability of knocking. The pressure rise rate was controlled and the in-cylinder hot spots were reduced by the EGR system which could suppress the occurrence of the pre-ignition in the hydrogen engine.
Methodologies for Representing the Road Transport Sector in Energy System Models
Dec 2013
Publication
Energy system models are often used to assess the potential role of hydrogen and electric powertrains for reducing transport CO2 emissions in the future. In this paper we review how different energy system models have represented both vehicles and fuel infrastructure in the past and we provide guidelines for their representation in the future. In particular we identify three key modelling decisions: the degree of car market segmentation the imposition of market share constraints and the use of lumpy investments to represent infrastructure. We examine each of these decisions in a case study using the UK MARKAL model. While disaggregating the car market principally affects only the transition rate to the optimum mix of technologies market share constraints can greatly change the optimum mix so should be chosen carefully. In contrast modelling infrastructure using lumpy investments has little impact on the model results. We identify the development of new methodologies to represent the impact of behavioural change on transport demand as a key challenge for improving energy system models in the future.
Operation of a Solid Oxide Fuel Cell Based Power System with Ammonia as a Fuel: Experimental Test and System Design
Nov 2020
Publication
Ammonia has strong potentialities as sustainable fuel for energy applications. NH3 is carbon free and can be synthetized from renewable energy sources (RES). In Solid Oxide Fuel Cells NH3 reacts electrochemically thereby avoiding the production of typical combustion pollutants such as NOx. In this study an ammonia-fueled solid oxide fuel cells (SOFC) system design is proposed and a thermodynamic model is developed to evaluate its performance. A SOFC short stack was operated with NH3 in a wide range of conditions. Experimental results are implemented in the thermodynamic model. Electrical efficiency of 52.1% based on ammonia Lower Heating Value is calculated at a net power density of 0.36 W cmFC −2 . The operating conditions of the after burner and of the ammonia decomposition reactor are studied by varying the values of specific parameters. The levelized cost of energy of 0.221 $ kWh−1 was evaluated as introduced by the International Energy Agency for a system that operates at nominal conditions and at a reference power output of 100 kW. This supports the feasibility of ammonia-fueled SOFC systems with reference to the carbon free energy market specifically considering the potential development of green ammonia production.
Spatially-resolved Analysis of the Challenges and Opportunities of Power-to-Gas (PtG) in Baden-Württemberg until 2040
Mar 2017
Publication
The increasing penetration of renewable energies will make new storage technologies indispensable in the future. Power-to-Gas (PtG) is one long-term storage technology that exploits the existing gas infrastructure. However this technology faces technical economic environmental challenges and questions. This contribution presents the final results of a large research project which attempted to address and provide answers to some of these questions for Baden-Württemberg (south west Germany). Three energy scenarios out to 2040 were defined one oriented towards the Integrated Energy and Climate Protection Concept of the Federal State Government and two alternatives. Timely-resolved load profiles for gas and electricity for 2015 2020 2030 and 2040 have been generated at the level of individual municipalities. The profiles include residential and industrial electrical load gas required for heating (conventional and current-controlled CHP) as well as gas and electricity demand for mobility. The installation of rooftop PV-plants and wind power plants is projected based on bottom up cost-potential analyses which account for some social acceptance barriers. Residential load profiles are derived for each municipality. In times with negative residual load the PtG technology could be used to convert electricity into hydrogen or methane. The detailed analysis of four structurally-different model regions delivered quite different results. While in large cities no negative residual load is likely due to the continuously high demand and strong networks rural areas with high potentials for renewables could encounter several thousand hours of negative residual load. A cost-effective operation of PtG would only be possible under favorable conditions including high full load hours a strong reduction in costs and a technical improvement of efficiency. Whilst these conditions are not expected to appear in the short to mid-term but may occur in the long term in energy systems with very high shares of renewable energy sources
Sizing and Performance Analysis of Hydrogen- and Battery-Based Powertrains, Integrated into a Passenger Train for a Regional Track, Located in Calabria (Italy)
Aug 2022
Publication
In order to decarbonize the rail industry the development of innovative locomotives with the ability to use multiple energy sources constituting hybrid powertrains plays a central role in transitioning from conventional diesel trains. In this paper four configurations based on suitable combinations of fuel cells and/or batteries are designed to replace or supplement a diesel/overhead line powertrain on a real passenger train (the Hitachi Blues) tested on an existing regional track the Catanzaro Lido–Reggio Calabria line (Italy) managed by Trenitalia SpA. (Italy). The configurations (namely battery–electrified line full-battery fuel cell–battery–electrified line and fuel cell–battery) are first sized with the intention of completing a round trip then integrated on board with diesel engine replacement in mind and finally occupy a portion of the passenger area within two locomotives. The achieved performance is thoroughly examined in terms of fuel cell efficiency (greater than 47%) hydrogen consumption (less than 72 kg) braking energy recovery (approximately 300 kWh) and battery interval SOC.
Sizing of a Fuel Cell–battery Backup System for a University Building Based on the Probability of the Power Outages Length
Jul 2022
Publication
Hydrogen is a bright energy vector that could be crucial to decarbonise and combat climate change. This energy evolution involves several sectors including power backup systems to supply priority facility loads during power outages. As buildings now integrate complex automation domotics and security systems energy backup systems cause interest. A hydrogen-based backup system could supply loads in a multi-day blackout; however the backup system should be sized appropriately to ensure the survival of essential loads and low cost. In this sense this work proposes a sizing of fuel cell (FC) backup systems for low voltage (LV) buildings using the history of power outages. Historical data allows fitting a probability function to determine the appropriate survival of loads. The proposed sizing is applied to a university building with a photovoltaic generation system as a case study. Results show that the sizing of an FC–battery backup system for the installation is 7.6% cheaper than a battery-only system under a usual 330-minutes outage scenario. And 59.3% cheaper in the case of an unusual 48-hours outage scenario. It ensures a 99% probability of supplying essential load during power outages. It evidences the pertinence of an FC backup system to attend to outages of long-duration and the integration of batteries to support the abrupt load variations. This research is highlighted by using historical data from actual outages to define the survival of essential loads with total service probability. It also makes it possible to determine adequate survival for non-priority loads. The proposed sizing is generalisable and scalable for other buildings and allows quantifying the reliability of the backup system tending to the resilience of electrical systems.
Pathways for Low-Carbon Transition of the Steel Industry—A Swedish Case Study
Jul 2020
Publication
The concept of techno-economic pathways is used to investigate the potential implementation of CO2 abatement measures over time towards zero-emission steelmaking in Sweden. The following mitigation measures are investigated and combined in three pathways: top gas recycling blast furnace (TGRBF); carbon capture and storage (CCS); substitution of pulverized coal injection (PCI) with biomass; hydrogen direct reduction of iron ore (H-DR); and electric arc furnace (EAF) where fossil fuels are replaced with biomass. The results show that CCS in combination with biomass substitution in the blast furnace and a replacement primary steel production plant with EAF with biomass (Pathway 1) yield CO2 emission reductions of 83% in 2045 compared to CO2 emissions with current steel process configurations. Electrification of the primary steel production in terms of H-DR/EAF process (Pathway 2) could result in almost fossil-free steel production and Sweden could achieve a 10% reduction in total CO2 emissions. Finally (Pathway 3) we show that increased production of hot briquetted iron pellets (HBI) could lead to decarbonization of the steel industry outside Sweden assuming that the exported HBI will be converted via EAF and the receiving country has a decarbonized power sector.
Fostering Macroeconomic Research on Hydrogen-Powered Aviation: A Systematic Literature Review on General Equilibrium Models
Feb 2023
Publication
Hydrogen is a promising fuel to decarbonize aviation but macroeconomic studies are currently missing. Computable general equilibrium (CGE) models are suitable to conduct macroeconomic analyses and are frequently employed in hydrogen and aviation research. The main objective of this paper is to investigate existing CGE studies related to (a) hydrogen and (b) aviation to derive a macroeconomic research agenda for hydrogen-powered aviation. Therefore the well-established method of systematic literature review is conducted. First we provide an overview of 18 hydrogen-related and 27 aviation-related CGE studies and analyze the literature with respect to appropriate categories. Second we highlight key insights and identify research gaps for both the hydrogen and aviation-related CGE literature. Our findings comprise inter alia hydrogen’s current lack of cost competitiveness and the macroeconomic relevance of air transportation. Research gaps include among others a stronger focus on sustainable hydrogen and a more holistic perspective on the air transportation system. Third we derive implications for macroeconomic research on hydrogen-powered aviation including (I) the consideration of existing modeling approaches (II) the utilization of interdisciplinary data and scenarios (III) geographical suitability (IV) the application of diverse policy tools and (V) a holistic perspective. Our work contributes a meaningful foundation for macroeconomic studies on hydrogen-powered aviation. Moreover we recommend policymakers to address the macroeconomic perspectives of hydrogen use in air transportation.
Everything About Hydrogen Podcast: The Other Hydrogen Vehicle?
Oct 2019
Publication
For this episode we speak to Amanda Lyne the Managing Director of ULEMCo and the Chair of the UK Hydrogen and Fuel Cell Association (UKHFCA). Below are a few links to some of the content discussed on the show and some further background reading.
The podcast can be found on their website
The podcast can be found on their website
Effect of H2 on Blast Furnace Ironmaking: A Review
Nov 2022
Publication
Under the background of “carbon peaking” and “carbon neutralization” the green transformation of iron and steel enterprises is imminent. The hydrogen-rich smelting technology of blast furnaces is very important for reducing energy consumption and CO2 emission in ironmaking systems and it is one of the important directions of green and low-carbon development of iron and steel enterprises. In this paper the research status of the thermal state reduction mechanism of iron-bearing burden coke degradation behavior and formation of the cohesive zone in various areas of blast furnace after hydrogen-rich smelting is summarized which can make a more clear and comprehensive understanding for the effect of H2 on blast furnace ironmaking. Meanwhile based on the current research situation it is proposed that the following aspects should be further studied in the hydrogen-rich smelting of blast furnaces: (1) the utilization rate of hydrogen and degree of substitution for direct reduction (2) combustion behavior of fuel in raceway (3) control of gas flow distribution in the blast furnace (4) operation optimization of the blast furnace.
Sector Coupling and Business Models Towards Sustainability: The Case of the Hydrogen Vehicle Industry
Mar 2022
Publication
The concept of sector coupling has been gaining increased momentum in political discourses during 18 the past few years but it has only recently received the attention of international academics. The 19 private sector is particularly relevant to foster sector coupling through entrepreneurial action – 20 specifically innovative business models for more sustainable technologies are needed to promote a 21 transition towards more sustainability. So far however the literature on business models from a 22 sector coupling perspective is scarce yet strongly emerging. To address the identified research gaps 23 and enhance the current knowledge on the emerging hydrogen vehicle industry and sector coupling 24 this study adopts a qualitative and exploratory research approach and builds on information gained 25 in 103 semi-structured interviews to discuss emerging business models in Germany. In particular 33 26 business cases have been analyzed. Anchoring business model theory to the concept of sector 27 coupling this study identifies 12 business model archetypes in the emerging hydrogen vehicle 28 industry and its value chain. It can be shown that while the market is still emerging and the market 29 players are not defined and are evolving companies are currently engaged in finding their position 30 along the value chain fostering vertical integration and promoting cooperation between the 31 different sectors. While this study is relevant for both the academia and the industry it is particularly 2 32 interesting for policy makers shaping the future of sustainable development specifically considering 33 integrated energy systems.
Improving the Economics of Fossil-free Steelmaking via Co-production of Methanol
Mar 2022
Publication
Steelmaking is responsible for 7% of the global net emissions of carbon dioxide and heavily reducing emissions from currently dominating steelmaking processes is difficult and costly. Recently new steelmaking processes based on the reduction of iron ore with hydrogen (H2) produced via water electrolysis have been suggested. If the electricity input to such processes is fossil-free near-zero carbon dioxide emissions steelmaking is achievable. However the high electricity demand of electrolysis is a significant implementation barrier. A H2 storage may alleviate this via allowing a larger share of H2 to be produced at low electricity prices. However accurately forecasting the dynamics of electricity markets is challenging. This increases the risk of investment in a H2 storage. Here we evaluate a novel methanol-based H2 storage concept for a H2-based steelmaking process that also allows for the coproduction of methanol. During electricity price peaks the methanol can be reformed to produce H2 for the steelmaking process. During prolonged periods of low electricity prices excess methanol can be produced and sold off thus improving the prospects of storage profitability. We use historical electricity prices and a process model to evaluate methanol-fossil-free steel co-production schemes. Methanol coproduction has the potential to improve the economics of H2 supply to a fossil-free steelmaking process by up to an average of 0.40 €/kg H2 across considered scenarios equivalent to a reduction in H2 production electricity costs of 25.0%
Analysis of Performance, Emissions, and Lubrication in a Spark-ignition Engine Fueled with Hydrogen Gas Mixtures
Oct 2022
Publication
Hydrogen is one of the main alternative fuels with the greatest potential to replace fossil fuels due to its renewable and environmentally friendly nature. Due to this the present investigation aims to evaluate the combustion characteristics performance parameters emissions and variations in the characteristics of the lubricating oil. The investigation was conducted in a spark-ignition engine fueled by gasoline and hydrogen gas. Four engine load conditions (25% 50% 75% and 100%) and three hydrogen gas mass concentration conditions (3% 6% and 9%) were defined for the study. The investigation results allowed to demonstrate that the injection of hydrogen gas in the gasoline engine causes an increase of 3.2% and 4.0% in the maximum values of combustion pressure and heat release rates. Additionally hydrogen causes a 2.9% increase in engine BTE. Hydrogen's more efficient combustion process allowed for reducing CO HC and smoke opacity emissions. However hydrogen gas causes an additional increase of 14.5% and 30.4% in reducing the kinematic viscosity and the total base number of the lubricating oil. In addition there was evidence of an increase in the concentration of wear debris such as Fe and Cu which implies higher rates of wear in the engine's internal components.
Progress of Performance, Emission, and Technical Measures of Hydrogen Fuel Internal-Combustion Engines
Oct 2022
Publication
To achieve the goals of low carbon emission and carbon neutrality some urgent challenges include the development and utilization of low-carbon or zero-carbon internal combustion engine fuels. Hydrogen as a clean efficient and sustainable fuel has the potential to meet the abovementioned challenges. Thereby hydrogen internal combustion engines have been attracting attention because of their zero carbon emissions high thermal efficiency high reliability and low cost. In this paper the opportunities and challenges faced by hydrogen internal-combustion engines were analyzed. The progress of hydrogen internal-combustion engines on the mixture formation combustion mode emission reduction knock formation mechanism and knock suppression measures were summarized. Moreover possible technical measures for hydrogen internal-combustion engines to achieve higher efficiency and lower emissions were suggested.
Contribution of Potential Clean Trucks in Carbon Peak Pathway of Road Freight Based on Scenario Analysis: A Case Study of China
Oct 2022
Publication
Reducing the carbon emissions from trucks is critical to achieving the carbon peak of road freight. Based on the prediction of truck population and well-to-wheel (WTW) emission analysis of traditional diesel trucks and potential clean trucks including natural gas battery-electric plug-in hybrid electric and hydrogen fuel cell the paper analyzed the total greenhouse gas (GHG) emissions of China's road freight under four scenarios including baseline policy facilitation (PF) technology breakthrough (TB) and PF-TB. The truck population from 2021 to 2035 is predicted based on regression analysis by selecting the data from 2002 to 2020 of the main variables such as the GDP scale road freight turnover road freight volume and the number of trucks. The study forecasts the truck population of different segments such as mini-duty trucks (MiDT) light-duty trucks (LDT) medium-duty trucks (MDT) and heavy-duty trucks (HDT). Relevant WTW emissions data are collected and adopted based on the popular truck in China's market PHEVs have better emission intensity especially in the HDT field which reduces by 51% compared with ICEVs. Results show that the scenario of TB and PF-TB can reach the carbon peak with 0.13% and 1.5% total GHG emissions reduction per year. In contrast the baseline and PF scenario fail the carbon peak due to only focusing on the number of clean trucks while lacking the restrictions on the GHG emission factors of energy and ignoring the improvement of trucks' energy efficiency and the total emissions increased by 29.76% and 16.69% respectively compared with 2020. As the insights adopting clean trucks has an important but limited effect which should coordinate with the transition to low carbon energy and the melioration of clean trucks to reach the carbon peak of road freight in China.
Transient Modeling and Performance Analysis of Hydrogen-Fueled Aero Engines
Jan 2023
Publication
With the combustor burning hydrogen as well as the strongly coupled fuel and cooling system the configuration of a hydrogen-fueled aero engine is more complex than that of a conventional aero engine. The performance and especially the dynamic behavior of a hydrogen-fueled aero engine need to be fully understood for engine system design and optimization. In this paper both the transient modeling and performance analysis of hydrogen-fueled engines are presented. Firstly the models specific to the hydrogen-fueled engine components and systems including the hydrogen-fueled combustor the steam injection system a simplified model for a quick NOx emission assessment and the heat exchangers are developed and then integrated to a conventional engine models. The simulations with both Simulink and Speedgoat-based hardware in the loop system are carried out. Secondly the performance analysis is performed for a typical turbofan engine configuration CF6 and for the two hydrogen-fueled engine configurations ENABLEH2 and HySIITE which are currently under research and development by the European Union and Pratt & Whitney respectively. At last the simulation results demonstrate that the developed transient models can effectively reflect the characteristics of hydrogen burning heat exchanging and NOx emission for hydrogen-fueled engines. In most cases the hydrogen-fueled engines show lower specific fuel consumption lower turbine entry temperature and less NOx emissions compared with conventional engines. For example at max thrust state the advanced hydrogen-fueled engine can reduce the parameters mentioned above by about 68.5% 3.7% and 12.7% respectively (a mean value of two configurations).
Air Mass Flow and Pressure Optimisation of a PEM Fuel Cell Range Extender System
Aug 2022
Publication
In order to eliminate the local CO2 emissions from vehicles and to combat the associated climate change the classic internal combustion engine can be replaced by an electric motor. The two most advantageous variants for the necessary electrical energy storage in the vehicle are currently the purely electrochemical storage in batteries and the chemical storage in hydrogen with subsequent conversion into electrical energy by means of a fuel cell stack. The two variants can also be combined in a battery electric vehicle with a fuel cell range extender so that the vehicle can be refuelled either purely electrically or using hydrogen. The air compressor a key component of a PEM fuel cell system can be operated at different air excess and pressure ratios which influence the stack as well as the system efficiency. To asses the steady state behaviour of a PEM fuel cell range extender system a system test bench utilising a commercially available 30 kW stack (96 cells 409 cm2 cell area) was developed. The influences of the operating parameters (air excess ratio 1.3 to 1.7 stack temperature 20 °C–60 °C air compressor pressure ratio up to 1.67 load point 122 mA/cm2 to 978 mA/cm2) on the fuel cell stack voltage level (constant ambient relative humidity of 45%) and the corresponding system efficiency were measured by utilising current voltage mass flow temperature and pressure sensors. A fuel cell stack model was presented which correlates closely with the experimental data (0.861% relative error). The air supply components were modelled utilising a surface fit. Subsequently the system efficiency of the validated model was optimised by varying the air mass flow and air pressure. It is shown that higher air pressures and lower air excess ratios increase the system efficiency at high loads. The maximum achieved system efficiency is 55.21% at the lowest continuous load point and 43.74% at the highest continuous load point. Future work can utilise the test bench or the validated model for component design studies to further improve the system efficiency.
Hybrid Renewable Hydrogen Energy Solution for Application in Remote Mines
Dec 2020
Publication
Mining operations in remote locations rely heavily on diesel fuel for the electricity haulage and heating demands. Such significant diesel dependency imposes large carbon footprints to these mines. Consequently mining companies are looking for better energy strategies to lower their carbon footprints. Renewable energies can relieve this over-reliance on fossil fuels. Yet in spite of their many advantages renewable systems deployment on a large scale has been very limited mainly due to the high battery storage system. Using hydrogen for energy storage purposes due to its relatively cheaper technology can facilitate the application of renewable energies in the mining industry. Such cost-prohibitive issues prevent achieving 100% penetration rate of renewables in mining applications. This paper offers a novel integrated renewable–multi-storage (wind turbine/battery/fuel cell/thermal storage) solution with six different configurations to secure 100% off-grid mining power supply as a stand-alone system. A detailed comparison between the proposed configurations is presented with recommendations for implementation. A parametric study is also performed identifying the effect of different parameters (i.e. wind speed battery market price and fuel cell market price) on economics of the system. The result of the present study reveals that standalone renewable energy deployment in mine settings is technically and economically feasible with the current market prices depending on the average wind speed at the mine location.
No more items...