Safety
CFD Validation Against Large Scale Liquified Helium Release
Sep 2019
Publication
The ADREA-HF CFD code is validated against a large scale liquefied helium release experiment on flat ground performed by INERIS in the past. The predicted release and dispersion behavior is evaluated against the experimental using temperature time histories at sensors deployed at various distances and heights downstream the source. For the selected sensors the temperature predictions are generally in good agreement with the experimental with a tendency to under-predict temperature as the source is approached.
Risk Reduction Potential of Accident Prevention and Mitigation Features
Sep 2011
Publication
Quantitative Risk Assessment (QRA) can help to establish a set of design and operational requirements in hydrogen codes and standards that will ensure safe operation of hydrogen facilities. By analyzing a complete set of possible accidents in a QRA the risk drivers for these facilities can be identified. Accident prevention and mitigation features can then be analyzed to determine which are the most effective in addressing these risk drivers and thus reduce the risk from possible accidents. Accident prevention features/methods such as proper material selection and preventative maintenance are included in the design and operation of facilities. Accident mitigation features are included to reduce or terminate the potential consequences from unintended releases of hydrogen. Mitigation features can be either passive or active in nature. Passive features do not require any component to function in order to prevent or mitigate a hydrogen release. Examples of passive mitigation features include the use of separation distances barriers and flow limiting orifices. Active mitigation features initiate when specific conditions occur during an accident in order to terminate an accident or reduce its consequences. Examples of active mitigation features include detection and isolation systems fire suppression systems and purging systems. A concept being pursued by the National Fire Protection Association (NFPA) hydrogen standard development is to take credit for prevention and mitigation features as a means to reduce separation distances at hydrogen facilities. By utilizing other mitigation features the risk from accidents can be decreased and risk-informed separation distances can be reduced. This paper presents some preliminary QRA results where the risk reduction potential for several active and passive mitigation features was evaluated. These measures include automatic leak detection and isolation systems the use of flow limiting orifices and the use of barriers. Reducing the number of risk-significant components in a system was also evaluated as an accident prevention method. In addition the potential reduction in separation distances if such measures were incorporated at a facility was also determined.
The Effect of Tube Internal Geometry on the Propensity to Spontaneous Ignition in Pressurized Hydrogen Release
Sep 2013
Publication
Spontaneous ignition of compressed hydrogen release through a length of tube with different internal geometries is numerically investigated using our previously developed model. Four types of internal geometries are considered: local contraction local enlargement abrupt contraction and abrupt enlargement. The presence of internal geometries was found to significantly increase the propensity to spontaneous ignition. Shock reflections from the surfaces of the internal geometries and the subsequent shock interactions further increase the temperature of the combustible mixture at the contact region. The presence of the internal geometry stimulates turbulence enhanced mixing between the shock-heated air and the escaping hydrogen resulting in the formation of more flammable mixture. It was also found that forward-facing vertical planes are more likely to cause spontaneous ignition by producing the highest heating to the flammable mixture than backward-facing vertical planes.
Large Eddy Simulations of Asymmetric Turbulent Hydrogen Jets Issuing from Realistic Pipe Geometries
Sep 2017
Publication
In the current study a Large Eddy Simulation strategy is applied to model the dispersion of compressible turbulent hydrogen jets issuing from realistic pipe geometries. The work is novel as it explores the effect of jet densities and Reynolds numbers on vertical buoyant jets as they emerge from the outer wall of a pipe through a round orifice perpendicular to the mean flow within the pipe. An efficient Godunov solver is used and coupled with Adaptive Mesh Refinement to provide high resolution solutions only in areas of interest. The numerical results are validated against physical experiments of air and helium which allows a degree of confidence in analysing the data obtained for hydrogen releases. The results show that the jets investigated are always asymmetric. Thus significant discrepancies exist when applying conventional round jet assumptions to determine statistical properties associated with gas leaks from pipelines.
Ia-HySafe Standard Benchmark Exercise Sbep-V21- Hydrogen Release and Accumulation within a Non-Ventilated Ambient Pressure Garage at Low Release Rates
Sep 2011
Publication
The successful Computational Fluid Dynamics (CFD) benchmarking activity originally started within the EC-funded Network of Excellence HySafe (2004-2009) continues within the research topics of the recently established “International Association of Hydrogen Safety” (IA-HySafe). The present contribution reports the results of the standard benchmark problem SBEP-V21. Focus is given to hydrogen dispersion and accumulation within a non-ventilated ambient pressure garage both during the release and post-release periods but for very low release rates as compared to earlier work (SBEP-V3). The current experiments were performed by CEA at the GARAGE facility under highly controlled conditions. Helium was vertically released from the centre of the 5.76 m (length) x 2.96 m (width) x 2.42 m (height) facility 22 cm from the floor from a 29.7 mm diameter opening at a volumetric rate of 18 L/min (0.027 g/s equivalent hydrogen release rate compared to 1 g/s for SBEP-V3) and for a period of 3740 seconds. Helium concentrations were measured with 57 catharometric sensors at various locations for a period up to 1.1 days. The simulations were performed using a variety of CFD codes and turbulence models. The paper compares the results predicted by the participating partners and attempts to identify the reasons for any observed disagreements.
HIAD – Hydrogen Incident and Accident Database
Sep 2011
Publication
The Hydrogen Incident and Accident Database (HIAD) is being developed as a repository of systematic data describing in detail hydrogen-related undesired events (incidents or accidents). It is an open web-based information system serving various purposes such as a data source for lessons learnt risk communication and partly risk assessment. The paper describes the features of the three HIAD modules – the Data Entry Module (DEM) the Data Retrieval Module (DRM) and the Data Analysis Module (DAM) – and the potential impact the database may have on hydrogen safety. The importance of data quality assurance process is also addressed.
Radiation from Hydrogen Jet Fires Investigated by Time-resolved Spectroscopy
Sep 2013
Publication
Jet fires develop on release of hydrogen from pressurized storage depending on orifice pressures and volumes. Risks arise from flame contact dispersion of hot gases and heat radiation. The latter varies strongly in time at short scales down to milliseconds caused by turbulent air entrainment and fluctuations. These jets emit bands of OH in the UV and water in the NIR and IR spectral range. These spectra enable the temperature measurement and the estimation of the air number of the measuring spot which can be used to estimate the total radiation at least from the bright combustion zones. Compared to video and IR camera frames the radiation enables to estimate species and temperatures distributions and total emissions. Impurities generate continuum radiation and the emission of CO2 in the IR indicates air entrainment which can be compared to CHEMKIN II calculation of the reaction with air.
Experimental Investigation of Flame and Pressure Dynamics after Spontaneous Ignition in Tube Geometry
Sep 2013
Publication
Spontaneous ignition processes due to high pressure hydrogen releases into air are known phenomena. The sudden expansion of pressurized hydrogen into a pipe filled with ambient air can lead to a spontaneous ignition with a jet fire. This paper presents results of an experimental investigation of the visible flame propagation and pressure measurements in 4 mm extension tubes of up to 1 m length attached to a bulk vessel by a rupture disc. Transparent glass tubes for visual observation and shock wave pressure sensors are used in this study. The effect of the extension tube length on the development of a stable jet fire after a spontaneous ignition is discussed.
Materials Aspects Associated with the Addition of up to 20 mol% Hydrogen into an Existing Natural Gas Distribution Network
Sep 2019
Publication
The introduction of hydrogen into the UK natural gas main has been reviewed in terms of how materials within the gas distribution network may be affected by contact with up to 80% Natural Gas : 20 mol% hydrogen blend at up to 2 barg. A range of metallic polymeric and elastomeric materials in the gas distribution network (GDN) were assessed via a combination of literature review and targeted practical test programmes.
The work considered:
The work considered:
- The effect of hydrogen on metallic materials identified in the network
- The effect of hydrogen on polymeric materials identified in the network
- The effect of hydrogen exposure on polyethylene pipeline techniques (squeeze off and collar electrofusion)
Regulations, Codes, and Standards (RCS) For Large Scale Hydrogen Systems
Sep 2017
Publication
Hydrogen has potential applications that require larger-scale storage use and handling systems than currently are employed in emerging-market fuel cell applications. These potential applications include hydrogen generation and storage systems that would support electrical grid systems. There has been extensive work evaluating regulations codes and standards (RCS) for the emerging fuel cell market such as the infrastructure required to support fuel cell electric vehicles. However there has not been a similar RCS evaluation and development process for these larger systems. This paper presents an evaluation of the existing RCS in the United States for large-scale systems and identifies potential RCS gaps. This analysis considers large-scale hydrogen technologies that are currently being employed in limited use but may be more widely used as large-scale applications expand. The paper also identifies areas of potential safety research that would need to be conducted to fill the RCS gaps. U.S. codes define bulk hydrogen storage systems but do not define large-scale systems. This paper evaluates potential applications to define a large-scale hydrogen system relative to the systems employed in emerging technologies such as hydrogen fuelling stations. These large-scale systems would likely be of similar size to or larger than industrial hydrogen systems.
Hydrogen Bubble Dispersion and Surface Bursting Behaviour
Sep 2013
Publication
In many processes where hydrogen may be released from below a liquid surface there has been concern regarding how such releases might ultimately disperse in an ullage space. Knowledge of the extent and persistence of any flammable volume formed is needed for hazardous area classification as well as for validation of explosion modelling or experiments. Following an initial release of hydrogen the overall process can be subdivided into three stages (i) rise and possible break-up of a bubble in the liquid (ii) formation and bursting of a thin gas-liquid-gas interface at the liquid surface and (iii) dispersion of the released gas. An apparatus based on a large glass sided water tank has been constructed which employs two synchronised high-speed imaging systems to record the behaviour of hydrogen bubble release and dispersion. A high-speed digital video system records the rising of the bubbles and the formation and bursting of the gas-liquid-gas interface at the liquid surface. An additional schlieren system is used to visualise the hydrogen release as bubbles burst at the liquid surface. The bubble burst mechanism can clearly be described from the results obtained. Following the nucleation of a hole surface tension causes the liquid film to peel back rapidly forming a ring/torus of liquid around the enlarging hole. This process lasts only a few milliseconds. Although some hydrogen can be seen to be expelled from the bubble much seems to remain in place as the film peels away. To assess the extent of the flammable plume following a bubble burst the apparatus was modified to include an electric-arc igniter. In order to identify plumes coincident in space with the igniter a schlieren system was built capable of recording simultaneously in two orthogonal directions. This confirmed that clouds undetected by the schlerien imaging could not be ignited with the electric arc igniter.
Experimental Investigation of Nonideality and Nonadiabatic Effects Under High Pressure Releases
Sep 2013
Publication
Due to the nonideality of a high pressure hydrogen release the possibility of a two-phase flow and its effect on the dynamics of the discharge process was experimentally investigated. A small-scale facility was designed and constructed to simulate the transient blow-down of a cryogenic fluid through a small break. Gaseous and liquid nitrogen were planned to were used as a surrogate for GH2 and LH2. The results will complement the quasi-stationary safety regulation tests and will provide time-dependent data for verification of the theoretical models. Different orifice sizes (0.5 1 2 4 mm) and initial N2 pressures (30 – 200 bar) were used in the tests. The measured time-dependent data for vessel discharge pressure thrust discharge mass flow rate and gas temperatures were compared against a theoretical model for high pressure nitrogen release. This verification for nitrogen also assures the equation of state for hydrogen which is based on the same methodology.
Thermal Loading Cases of Hydrogen High Pressure Storage Cylinders
Sep 2007
Publication
Composite cylinders with metal liner are used for the storage of compressed hydrogen in automotive application. These hybrid pressure cylinders are designed for a nominal working pressure of up to 70 MPa. They also have to withstand a temperature range between -40°C and +85°C according GRPE draft [1] and for short periods up to a maximum temperature of 140°C during filling (fast filling) [2]. In order to exploit the material properties efficiently with a high degree of lightweight optimization and a high level of safety on the same time a better understanding of the structural behavior of hybrid designs is necessary. Work on this topic has been carried out in the frame of a work package on safety aspects and regulation (Subproject SAR) of the European IP StorHy (www.storhy.net). The temperature influence on the composite layers is distinctive due to there typical polymer material behavior. The stiffness of the composite layer is a function of temperature which influences global strains and stress levels (residual stresses) in operation. In order to do an accurate fatigue assessment of composite hybrid cylinders a realistic modeling of a representative temperature load is needed. For this climate data has been evaluated which were collected in Europe over a period of 30 years [3]. Assuming that the temperature follows a Gaussian (normal) distribution within the assessed period of 30 years it is possible to generate a frequency distribution for different temperature classes for the cold extreme and the hot extreme. Combining these distributions leads to the overall temperature range distribution (frequency over temperature classes). The climatic temperature influence the filling temperature and the pressure load have to be considered in combination with the operation profile of the storage cylinder to derive a complete load vector for an accurate assessment of the lifetime and safety level.
Combustion Modeling in Large Scale Volumes
Sep 2013
Publication
This paper is devoted to a benchmarking exercise of the EUROPLEXUS code against several large scale deflagration and detonation experimental data sets in order to improve its hydrogen combustion modeling capabilities in industrial settings. The code employs an algorithm for the propagation of reactive interfaces RDEM which includes a combustion wave as an integrable part of the Reactive Riemann problem propagating with a fundamental flame speed (being a function of initial mixture properties as well as gas dynamics parameters). An improvement of the combustion model is searched in a direction of transient interaction of flames with regions of elevated vorticity/shear in obstacle-laden channels and vented enclosures.
Experiments with Release and Ignition of Hydrogen Gas in a 3m Long Channel
Sep 2007
Publication
This paper presents results from laboratory experiments with hydrogen dispersions and explosions in a 3 m long channel. Our objective is to get a better understanding of the phenomena and to develop tools that can analyse hydrogen dispersions and explosions. A total of 5 test series were performed with flow rates of hydrogen from 1.8 dm³/min to 75 dm³/min. The propagation of the combustible hydrogen-air cloud in the channel was observed from high-speed video recordings. The hydrogen-air cloud in the channel behaves as a gravity current and the flow appears to be well described by Froude scaling with a length scale corresponding to the height of a layer of 100 % hydrogen. The Froude numbers observed in the experiments are in good agreement with the theory of "light-fluid intrusion" for gravity currents found in the literature. Numerical simulations with the Flacs code correlate well with the experimental results. The flame propagation indicated that approximately half the height of the channel was filled with combustible mixture. We believe that this Froude scaling can be useful as a tool to analyse the consequences of hydrogen release in buildings channels and tunnels.
Effectiveness of a Blower in Reducing the Hazard of Hydrogen Leaking from a Hydrogen-fueled Vehicle
Sep 2013
Publication
To handle a hydrogen fuel cell vehicle (HFCV) safely after its involvement in an accident it is necessary to provide appropriate emergency response information to the first responder. In the present study a forced wind of 10 m/s or faster with and without a duct was applied to a vehicle leaking hydrogen gas at a rate of 2000 NL/min. Then hydrogen concentrations were measured around the vehicle and an ignition test was conducted to evaluate the effectiveness of forced winds and the safety of emergency response under forced wind conditions. The results: 1) Forced winds of 10 m/s or faster caused the hydrogen concentrations in the vicinity of the vehicle to decline to less than the lower flammability limit and the hydrogen gas in the various sections of the vehicles were so diluted that even if ignition occurred the blast-wave pressure was moderate. 2) When the first responder had located the hydrogen leakage point in the vehicle it was possible to lower the hydrogen concentrations around the vehicle by aiming the wind duct towards the leakage point and blowing winds at 10 m/s from the duct exit.
Gas Detection of Hydrogen/Natural Gas Blends in the Gas Industry
Sep 2019
Publication
A key element in the safe operation of a modern gas distribution system is gas detection. The addition of hydrogen to natural gas will alter the characteristics of the fuel and therefore its impact on gas detection must be considered. It is important that gas detectors remain sufficiently sensitive to the presence of hydrogen and natural gas mixtures and that they do not lead to false readings. This paper presents analyses of work performed as part of the Office for Gas and Energy Markets (OFGEM) funded HyDeploy project on the response of various natural gas industry detectors to blended mixtures up to 20 volume percent (vol%) of hydrogen in natural gas. The scope of the detectors under test included survey instruments and personal monitors that are used in the gas industry. Four blend ratios were analysed (0 10 15 and 20 vol% hydrogen in natural gas). The laboratory testing undertaken investigated the following:
- Flammable response to blends in the ppm range (0-0.2 vol%);
- Flammable response to blends in the lower explosion limit range (0.2-5 vol%);
- Flammable response to blends in the volume percent range (5-100 vol%);
- Oxygen response to blends in the volume percent range (0-25 vol%); and
- Carbon monoxide response to blends in the ppm range (0-1000 ppm).
The Correlation Method to Analyze the Gas Mixing Process On The Basis Of BOS Method
Sep 2011
Publication
Structures formed during gas mixing following an injection of a gas into atmosphere are analyzed using optic methods based on the detection of density non-uniformities. Methods for determination of fractal parameters for a random distribution of these non-uniformities are described and information revealed on the gas mixing structure is analyzed. The BOS (background oriented schlieren) technique is utilized to obtain the optical image of the forming structures which afterward is processed using the correlation procedure allowing to extract the quantitative information on the mixing. Additionally a possibility to link the characteristics of the injected gas source and the system fractal parameters was demonstrated. The method can be used in the development of the non-contact methods for the evaluation of the gaseous system parameters based on the optical diagnostics and potentially for the obtaining more detailed information of the gaseous turbulence.
Ignition of Hydrogen-air Mixtures by Moving Heated Particles
Oct 2015
Publication
Studying thermal ignition mechanisms is a key step for evaluating many ignition hazards. In the present work two-dimensional simulations with detailed chemistry are used to study the reaction pathways of the transient flow and ignition of a stoichiometric hydrogen-air mixture by moving hot spheres. For temperatures above the ignition threshold ignition takes place after a short time between the front stagnation point and separation location depending upon the sphere's surface temperature. Closer to the threshold the volume of gas adjacent to the separation region ignites homogeneously after a longer time. These results demonstrate the importance of boundary layer development and flow separation in the ignition process.
Fast Turbulent Deflagration and DDT of Hydrogen-Air Mixtures in Small Obstructed Channel
Sep 2007
Publication
An experimental study of flame propagation acceleration and transition to detonation in hydrogen-air mixture in 2 m long rectangular cross section channel filled with obstacles located at the bottom wall was performed. The initial conditions of the hydrogen-air mixture were 0.1 MPa and 293 K. Three different cases of obstacle height (blockage ratio 0.25 0.5 and 0.75) and four cases of obstacle density were studied with the channel height equal to 0.08 m. The channel width was 0.11 m in all experiments. The propagation of flame and pressure waves was monitored by four pressure transducers and four in house ion probes. The pairs of transducers and probes were placed at various locations along the channel in order to get information about the progress of the phenomena along the channel. To examine the influence of mixture composition on flame propagation and DDT the experiments were performed for the compositions of 20% 25% and 29.6% of H2 in air by volume. As a result of the experiments the deflagration and detonation regimes and velocities of flame propagation in the obstructed channel were determined.
No more items...