Transmission, Distribution & Storage

The NEWGASMET project has the overall objective to increase knowledge about the accuracy and durability of commercially available gas meters after exposure to renewable gases. This should lead to the improvement of existing meter designs and flow calibration standards. One of the recently released results is a proposal for a set of test gases to represent the range of non-conventional gases in the scope of the revision of the gas meter standards. In details these were proposed to be used in the CEN/TC237 standards and the OIML-R137:2014. During the project meetings concerns have been raised regarding the applicability of such test gases to EMC tests for static meters. Today such tests are performed in air but there is a clear agreement that the behaviour of the meter during EMC tests can be influenced by the renewable gas type. At least this agreement exists for the ultrasonic measurement technology while further discussion might be needed for the mass flow. However it is not simply possible to redesign the current EMC tests by replacing air with the defined gas mixtures as this would be quite impractical especially considering the explosive nature of the test gases.

In this podcast David Ledesma talks with Rahmat Poudineh Senior Research Fellow and Aliaksei Patonia Research Fellow on issues and options with respect to long distance transportation of the hydrogen.

Hydrogen currently is mainly a local or regional commodity. If hydrogen is to become a truly global-traded commodity it needs to be transported over long transoceanic distances in an economical way. However unlike natural gas shipping compressed or liquefied hydrogen over long distances is very inefficient and expensive. At the same time hydrogen can be converted into multiple carriers with a higher energy density and higher transport capacity such as liquid ammonia toluene/methylcyclohexane (MCH) or methanol. These chemicals have their own advantages and drawbacks and their techno-economic characteristics in terms of boil-off gas and thermodynamic and conversion losses play a key role in the efficiency of transoceanic transportation of the hydrogen.

On the other hand apart from techno-economic features there are other factors to consider for long distance transportation of the hydrogen via its careers. Here such issues as safety public acceptance as well as legal and regulatory constraints may come into play. Another factor is the availability of the industries and infrastructures already developed around any of possible hydrogen carriers as well as their potential industrial applicability beyond hydrogen. Finally technological progress in other decarbonization applications and most importantly full commercialization of CCUS solutions is likely to dramatically change the approach towards long distance hydrogen transportation.

The podcast can be found on their website. 

Replacement of fossil fuels with clean hydrogen has been recognized as the most feasible approach of implementing CO2-free hydrogen economy globally. However large-scale storage of hydrogen is a critical component of hydrogen economy value chain because hydrogen is the lightest molecule and has moderately low volumetric energy content. To achieve successful storage of buoyant hydrogen at the subsurface and convenient withdrawal during the period of critical energy demand the integrity of the underground storage rock and overlying seal (caprock) must be assured. Presently there is paucity of information on hydrogen wettability of shale and the interfacial properties of H2/brine system. In this research contact angles of shale/H2/brine system and hydrogen/brine interfacial tension (IFT) were measured using Krüss drop shape analyzer (DSA 100) at 50 ◦C and varying pressure (14.7–1000 psi). A modified form of sessile drop approach was used for the contact angles measurement whereas the H2- brine IFT was measured through the pendant drop method. H2-brine IFT values decreased slightly with increasing pressure ranging between 63.68◦ at 14.7 psia and 51.29◦ at 1000 psia. The Eagle-ford shale with moderate total organic carbon (TOC) of 3.83% attained fully hydrogen-wet (contact angle of 99.9◦ ) and intermediate-wet condition (contact angle of 89.7◦ ) at 14.7 psi and 200 psi respectively. Likewise the Wolf-camp shale with low TOC (0.30%) attained weakly water-wet conditions with contact angles of 58.8◦ and 62.9◦ at 14.7 psi and 200 psi respectively. The maximum height of hydrogen that can be securely trapped by the Wolf-camp shale was approximately 325 meters whereas the value was merely 100 meters for the Eagle-ford shale. Results of this study will aid in assessment of hydrogen storage capacity of organic-rich shale (adsorption trapping) as well as evaluation of the sealing potentials of low TOC shale (caprock) during underground hydrogen storage.

Although electricity storage plays a decisive role for the German “Energiewende” and it has become evident that the successful diffusion of technologies is not only a question of technical feasibility but also of social acceptance research on electricity storage technologies from a social science point of view is still scarce. This study therefore empirically explores laypersons’ mindsets and knowledge related to storage technologies focusing on hydrogen. While the results indicate overall supportive attitudes and trust in hydrogen storage some misconceptions a lack of information as well as concerns were identified which should be addressed in future communication concepts.

Hydrogen uptake and embrittlement characteristics of a cold-drawn austenitic stainless steel wire were investigated. Slow strain rate testing and fracture surface analysis were applied to determine the hydrogen embrittlement resistance providing an apparent decrease in resistance to hydrogen embrittlement for a 50% degree of cold deformation. The hydrogen content was assessed by thermal desorption and laser-induced breakdown spectroscopy establishing a correlation between the total absorbed hydrogen and the intensity of near-surface hydrogen. The sub-surface hydrogen content of the hot-rolled specimen was determined to be 791 wt.ppm.

The share of electrical energy from renewable sources has increased considerably in recent years in an attempt to reduce greenhouse gas emissions. To mitigate the uncertainties of these sources and to balance energy production with consumption an energy storage system (ESS) based on water electrolysis to produce hydrogen is studied. It can be applied to AC microgrids where several renewable energy sources and several loads may be connected which is the focus of the study. When excess electricity production is converted into hydrogen via water electrolysis low DC voltages and high currents are applied which needs specific power converters. The use of a three-phase buck-type current source converter in a single conversion stage allows for an adjustable DC voltage to be obtained at the terminals of the electrolyzer from a three-phase AC microgrid. The voltage control is preferred to the current control in order to improve the durability of the system. The classical control of the buck-type rectifier is generally done using two loops that correspond only to the control of its output variables. The lack of control of the input variables may generate oscillations of the grid current. Our contribution in this article is to propose a new control for the buck-type rectifier that controls both the input and output variables of the converter to avoid these grid current oscillations without the use of active damping methods. The suggested control method is based on an approach using the flatness properties of differential systems: it ensures the large-signal stability of the converter. The proposed control shows better results than the classical control especially in oscillation mitigation and dynamic performances with respect to the rejection of disturbances caused by a load step.

Underground hydrogen storage (UHS) has attracted increasing attention as a promising technology for the largescale storage of renewable energy resources and the decarbonization of energy systems. This study aimed to identify critical parameters influencing UHS performance particularly the role of hydrogen conversion via in situ methanation and hydrogen recovery during production cycles. The main focus is the Lehen field in Upper Austria where a pilot hydrogen storage project was conducted under the leadership of RAG Austria AG. A layered reservoir model was developed on the basis of well-log data to simulate the field trials that occurred in 2016. A sensitivity analysis was performed with the one-parameter-at-a-time (OPAAT) method and the response surface methodology (RSM) to evaluate the impacts of different parameters on hydrogen methanation and hydrogen recovery. The RSM results indicate the activation energy as the most influential factor on methanation that accounts for ~20000 moles variation in generated methane significantly higher than the 6000 moles variance observed in OPAAT. However initial CO2 content contributes up to 15000 moles of methane gener ation as per RSM whereas OPAAT results in a larger impact of up to 32000 moles. These discrepancies demonstrate the limitations of isolated parameter analyses like OPAAT which may not accurately capture the complex interactions between factors influencing the methanation process. This research provides valuable in sights for optimizing UHS performance by emphasizing the influence of reservoir parameters on storage effi ciency. In addition a robust workflow for conducting comprehensive sensitivity analyses of UHS systems is established. By understanding these key factors the potential and predictability of large-scale UHS systems can be significantly improved.

Energy storage is essential to address the intermittent issues of renewable energy systems thereby enhancing system stability and reliability. This paper presents the design and operation optimisation of hydrogen/battery/ hybrid energy storage systems considering component degradation and energy cost volatility. The study ex amines a real-world case study which is a grid-connected warehouse located in a tropical climate zone with a photovoltaic solar system. An accurate and robust Multi-Objective Modified Firefly Algorithm (MOMFA) is proposed for the optimal design and operation of the energy storage systems of the case study. To further demonstrate the robustness and versatility of the optimisation method another synthetic case is tested for a location in a temperate climate zone that has a high seasonal mismatch. The modelling results show that the system in the tropical zone always provides a superior return when compared to a similar system in the temperate zone due to abundant solar resources. When comparing battery-only and hydrogen-only systems battery systems perform better than hydrogen systems in many situations with a higher self-sufficient ratio and net present value. However if there is high seasonal variation and a high requirement for using renewable energy (the penetration of renewable energy is >80 %) using hydrogen for energy storage is more beneficial. Furthermore the hybrid system (i.e. combining battery and hydrogen) outperforms battery-only and hydrogenonly systems. This is attributed to the complementary combination of hydrogen which can be used as a longterm energy storage option and battery which is utilised as a short-term option. This study also shows that storing hydrogen in a long-term strategy can lower component degradation enhance efficiency and increase the total economic performance of hydrogen and hybrid storage systems. The developed optimisation method and findings of this study can support the implementation of energy storage systems for renewable energy.

Underground Hydrogen Storage (UHS) as an emerging large-scale energy storage technology has shown great promise to ensure energy security with minimized carbon emission. A set of comprehensive UHS site evaluation criteria based on important factors that affect UHS performances is needed for its potential commercialization. This study focuses on the UHS site evaluation of gas mixing. The economic implications of gas mixing between injected hydrogen gas and the residual or cushion gas in a porous storage reservoir is an emerging problem for Underground Hydrogen Storage (UHS). It is already clear that reservoir scale heterogeneity such as formation structure (e.g. formation dip angle) and facies heterogeneity of the sedimentary rock may considerably affect the reservoir-scale mechanical dispersion-induced gas mixing during UHS in high permeability braided-fluvial systems (a common depleted reservoir type for UHS). Following this finding the current study uses the processmimicking modeling software to build synthetic meandering-fluvial reservoir models. Channel dimensions and the presence of abandoned channel facies are set as testing parameters resulting in 4 simulation cases with 200 realizations. Numerical flow simulations are performed on these models to investigate and compare the effects of reservoir and metre-scale heterogeneity on UHS gas mixing. Through simulation channel dimensions (reservoir-scale heterogeneity) are found to affect the uncertainty of produced gas composition due to mixing (represented by the P10-P90 difference of hydrogen fraction in a produced stream) by up to 42%. The presence of abandoned channel facies (metre-scale heterogeneity) depending on their architectural relationship with meander belts could also influence the gas mixing process to a comparable extent (up to 40%). Moreover we show that there is no clear statistical correlation between gas mixing and typical reservoir characterization parameters such as original gas in place (OGIP) average reservoir permeability and the Dykstra-Parsons coefficient. Instead the average time of travel of all reservoir cells calculated from flow diagnostics shows a negative correlation with the level of gas mixing. These results reveal the importance of 3D reservoir architecture analysis (integration of multiple levels of heterogeneity) to UHS site evaluation on gas mixing in depleted gas reservoirs. This study herein provides valuable insights into UHS site evaluation regarding gas mixing.

This paper focuses on the critical role of long-duration energy storage (LDES) technologies in facilitating renewable energy integration and achieving carbon neutrality. It presents a systematic review of four primary categories: mechanical energy storage chemical energy storage electrochemical energy storage and thermal energy storage. The study begins by analyzing the technical advantages and geographical constraints of pumped hydro energy storage (PHES) and compressed air energy storage (CAES) in high-capacity applications. It then explores the potential of hydrogen and synthetic fuels for long-duration clean energy storage. The section on electrochemical energy storage highlights the high energy density and flexible scalability of lithium-ion batteries and redox flow batteries. Finally the paper evaluates innovative advancements in large-scale thermal energy storage technologies including sensible heat storage latent heat storage and thermochemical heat storage. By comparing the performance metrics application scenarios and development prospects of various energy storage technologies this work provides theoretical support and practical insights for maximizing renewable energy utilization and driving the sustainable transformation of global energy systems.

Transmission pipelines are the safest and most economical solution for long-distance hydrogen delivery. However safety and reliability issues such as hydrogen’s impact on material properties including fracture toughness and fatigue crack growth could restrict pipeline development. This impact may also increase the risk of several pipeline failure causes including excavation damage corrosion earth movement material failures and other hydrogen damage mechanisms. While many quantitative risk assessment (QRA) studies exist for natural gas pipelines limited work focuses on hydrogen pipelines; the influence of hydrogen must be considered. This work presents a systematic causal model for hydrogen pipeline failures that incorporates multiple failure causes quantifying hydrogen influence on pipeline failures and analyzing how changes in hydrogen effects or operating conditions impact multiple failure causes. According to the results (1) hydrogen has a relatively minor impact on corrosion-related failure; (2) hydrogen greatly affects crack damage (the failure probability can increase by over 1000 times); (3) excavation damage is nearly independent of hydrogen’s effects; (4) earth movement damage shows increased susceptibility (the failure probability can increase by over 10 times). The hydrogen effects change the relative susceptibility of pipelines to these failure causes therefore to implement tailored safety measures under varying operating conditions.

The widespread use of hydrogen as an energy source relies on efficient large-scale storage techniques. Underground Hydrogen Storage (UHS) is a promising solution to balance the gap between renewable energy production and constant energy demand. UHS employs geological structures like salt caverns depleted reservoirs or aquifers for hydrogen storage enabling long-term and scalable storage capacity. Therefore robust and reliable predictive tools are essential to assess the risks associated with geological hydrogen storage. This paper presents a novel reactive transport model called “Underground Gas Flow simulAtions with Coupled bio-geochemical reacTions” or “UGFACT” designed for various gas injection processes accounting for geochemical and microbial reactions. The flow module and geochemical reactions in the UGFACT model were verified against two commercial reservoir simulators E300 and CMG-GEM showing excellent agreement in fluid flow variables and geochemical behaviour. A major step forward of this model is to integrate flow dynamics geochemical reactions and microbial activity. UGFACT was used to conduct a simple storage cycle in a 1D geometry across three different reservoirs each with different mineralogies and water compositions: Bentheimer sandstone Berea sandstone and Grey Berea sandstone under three microbial conditions (“No Reaction” “Moderate Rate” “High Rate”). The findings suggest that Bentheimer sandstone and Berea sandstone sites may experience severe effects from ongoing microbial and geochemical reactions whereas Grey Berea sandstone shows no significant H2 loss. Additionally the model predicts that under the high-rate microbial conditions the hydrogen consumption rate can reach to as much as 11 mmol of H2 per kilogram of water per day (mmol / kg⋅day) driven by methanogenesis and acetogenesis.

Long-duration energy storage is the key challenge facing renewable energy transition in the future of well over 50% and up to 75% of primary energy supply with intermittent solar and wind electricity while up to 25% would come from biomass which requires traditional type storage. To this end chemical energy storage at grid scale in the form of fuel appears to be the ideal option for wind and solar power. Renewable hydrogen is a much-considered fuel along with ammonia. However these fuels are not only difficult to transport over long distances but they would also require totally new and prohibitively expensive infrastructure. On the other hand the existing natural gas pipeline infrastructure in developed economies can not only transmit a mixture of methane with up to 20% hydrogen without modification but it also has more than adequate long-duration storage capacity. This is confirmed by analyzing the energy economies of the USA and Germany both possessing well-developed natural gas transmission and storage systems. It is envisioned that renewable methane will be produced via well-established biological and/or chemical processes reacting green hydrogen with carbon dioxide the latter to be separated ideally from biogas generated via the biological conversion of biomass to biomethane. At the point of utilization of the methane to generate power and a variety of chemicals the released carbon dioxide would be also sequestered. An essentially net zero carbon energy system would be then become operational. The current conversion efficiency of power to hydrogen/methane to power on the order of 40% would limit the penetration of wind and solar power. Conversion efficiencies of over 75% can be attained with the on-going commercialization of solid oxide electrolysis and fuel cells for up to 75% penetration of intermittent renewable power. The proposed hydrogen/methane system would then be widely adopted because it is practical affordable and sustainable.

Liquid hydrogen has the potential to significantly reduce in-flight carbon emissions in the aviation industry. Among the most promising aircraft configurations for future hydrogen-powered aviation are the blended wing body and the pure flying wing configurations. However their tapered and flattened airframe designs pose a challenge in accommodating liquid hydrogen storage tanks. This paper presents a design guide to tapered conformable pressure tanks for liquid hydrogen storage. The proposed tank configurations feature a multi-bubble layout and are subject to low internal differential pressure. The objective is to provide tank designers with simple geometric rules and practical guidelines to simplify the design process of tapered multi-bubble pressure tanks. Various tank configurations are discussed starting with a simple tapered two-bubble tank and advancing to more complex tapered configurations with a multi-segment and multi-bubble layout. A comprehensive design methodology is established providing tank designers with a step-by-step design procedure and highlighting the practical guidelines in each step of the design process.

Though being attractive on railway decarbonisation for regional lines excessive cost caused by immature hydrogen supply chain is one of the significant hurdles for promoting hydrogen traction to rolling stocks. Therefore we conduct bespoke research on the UK’s hydrogen supply chain for railway concentrating on hydrogen transportation. Firstly a map for the planned hydrogen production plants and potential hydrogen lines is developed with the location capacity and usage. A spatially explicit model for the hydrogen supply chain is then introduced which optimises the existing grid-based methodology on accuracy and applicability. Compressed hydrogen at three pressures and liquid hydrogen are considered as the mediums incorporating by road and rail transport. Furthermore three scenarios for hydrogen rail penetration are simulated respectively to discuss the levelised cost and the most suitable national transport network. The results show that the developed model with mix-integer linear programming (MILP) can well design the UK’s hydrogen distribution for railway traction. Moreover the hydrogen transport medium and vehicle should adjust to suit for different era where the penetration of hydrogen traction varies. The levelised cost of hydrogen (LCOH) decreases from 6.13 £/kg to 5.13 £/kg on average from the conservative scenario to the radical scenario. Applying different transport combinations according to the specific situation can satisfy the demand while reducing cost for multi-supplier and multitargeting hydrogen transport.

Hydrogen plays a vital role in decarbonizing the mobility sector. With the number of hydrogen vehicles expected to drastically increase a network of refuelling stations needs to be built to keep up with the hydrogen demand. However further research and development on hydrogen refuelling infrastructure storage and standardization is required to overcome technical and economic barriers. Simulation tools can reduce time and costs during the design phase but existing models do not fully support calculations of complete and arbitrary system layouts. Therefore a flexible simulation toolbox for rapid investigations of hydrogen refuelling and extraction processes as well as development of refuelling infrastructure vehicle tank systems and refuelling protocols for non-standardized applications was developed. Our model library H2VPATT comprises of typical components found in refuelling infrastructure. The key component is the hydrogen tank model. The simulation model was successfully validated with measurement data from refuelling tests of a 320 l type III tank.

The depletion of reliable energy sources and the environmental and climatic repercussions of polluting energy sources have become global challenges. Hence many countries have adopted various renewable energy sources including hydrogen. Hydrogen is a future energy carrier in the global energy system and has the potential to produce zero carbon emissions. For the non-fossil energy sources hydrogen and electricity are considered the dominant energy carriers for providing end-user services because they can satisfy most of the consumer requirements. Hence the development of both hydrogen production and storage is necessary to meet the standards of a “hydrogen economy”. The physical and chemical absorption of hydrogen in solid storage materials is a promising hydrogen storage method because of the high storage and transportation performance. In this paper physical hydrogen storage materials such as hollow spheres carbon-based materials zeolites and metal– organic frameworks are reviewed. We summarize and discuss the properties hydrogen storage densities at different temperatures and pressures and the fabrication and modification methods of these materials. The challenges associated with these physical hydrogen storage materials are also discussed.

Considerable progress has been made recently in the use of nanoporous materials for hydrogen storage. In this article the current status of the field and future challenges are discussed ranging from important open fundamental questions such as the density and volume of the adsorbed phase and its relationship to overall storage capacity to the development of new functional materials and complete storage system design. With regard to fundamentals the use of neutron scattering to study adsorbed H2 suitable adsorption isotherm equations and the accurate computational modelling and simulation of H2 adsorption are discussed. The new materials covered include flexible metal–organic frameworks core–shell materials and porous organic cage compounds. The article concludes with a discussion of the experimental investigation of real adsorptive hydrogen storage tanks the improvement in the thermal conductivity of storage beds and new storage system concepts and designs.

In the transition towards a more sustainable energy system hydrogen is seen as the key low-emission energy source. However the limited H2 volumetric density hinders its transportation. To overcome this issue liquid organic hydrogen carriers (LOHCs) molecules that can be hydrogenated and upon arrival dehydrogenated for H2 release have been proposed as hydrogen transport media. Considering toluene and dibenzyltoluene as representative carriers this work offers a systematic methodology for the analysis and the comparison of LOHCs in view of identifying cost-drivers of the overall value-chain. A detailed Aspen Plus process simulation is provided for hydrogenation and dehydrogenation sections. Simulation results are used as input data for the economic assessment. The process economics reveals that dehydrogenation is the most impactful cost-item together with the carrier initial loading the latter related to the LOHC transport distance. The choice of the most suitable molecule as H2 carrier ultimately is a trade-off between its hydrogenation enthalpy and cost.

As an important energy source to achieve carbon neutrality green hydrogen has always faced the problems of high use cost and unsatisfactory environmental benefits due to its remote production areas. Therefore a liquid-gaseous cascade green hydrogen delivery scheme is proposed in this article. In this scheme green hydrogen is liquefied into high-density and low-pressure liquid hydrogen to enable the transport of large quantities of green hydrogen over long distances. After longdistance transport the liquid hydrogen is stored and then gasified at transfer stations and converted into high-pressure hydrogen for distribution to the nearby hydrogen facilities in cities. In addition this study conducted a detailed model evaluation of the scheme around the actual case of hydrogen energy demand in Chengdu City in China and compared it with conventional hydrogen delivery methods. The results show that the unit hydrogen cost of the liquid-gaseous cascade green hydrogen delivery scheme is only 51.58 CNY/kgH2 and the dynamic payback periods of long- and short-distance transportation stages are 13.61 years and 7.02 years respectively. In terms of carbon emissions this scheme only generates indirect carbon emissions of 2.98 kgCO2/kgH2 without using utility electricity. In sum both the economic and carbon emission analyses demonstrate the advantages of the liquidgaseous cascade green hydrogen delivery scheme. With further reductions in electricity prices and liquefication costs this scheme has the potential to provide an economically/environmentally superior solution for future large-scale green hydrogen applications.

Seasonal underground hydrogen storage (UHS) in porous media provides an as yet untested method for storing surplus renewable energy and balancing our energy demands. This study investigates the technical suitability for UHS in depleted hydrocarbon fields and one deep aquifer site in Taranaki Basin Aotearoa New Zealand. Prospective sites are assessed using a decision tree approach providing a “fast-track” method for identifying potential sites and a decision matrix approach for ranking optimal sites. Based on expert elicitation the most important factors to consider are storage capacity reservoir depth and parameters that affect hydrogen injectivity/withdrawal and containment. Results from both approaches suggest that Paleogene reservoirs from gas (or gas cap) fields provide the best option for demonstrating UHS in Aotearoa New Zealand and that the country’s projected 2050 hydrogen storage demand could be exceeded by developing one or two high ranking sites. Lower priority is assigned to heterolithic and typically finer grained labile and clay-rich Miocene oil reservoirs and to deep aquifers that have no proven hydrocarbon containment.

In this podcast David Ledesma talks to Aliaksei Patonia and Veronika Lenivova about Hydrogen pipelines and high-voltage direct current (HVDC) transmission lines and how Hydrogen pipelines offer the advantage of transporting larger energy volumes but existing projects are dwarfed by the vast networks of HVDC transmission lines. The podcast discusses how advocates for hydrogen pipelines see potential in expanding these networks capitalizing on hydrogen’s physical similarities to natural gas and the potential for cost savings. However hydrogen’s unique characteristics such as its small molecular size and compression requirements present construction challenges. On the other hand HVDC lines while less voluminous excel in efficiently transmitting green electrons over long distances. They already form an extensive global network and their efficiency makes them suitable for various applications. Yet intermittent renewable energy sources pose challenges for both hydrogen and electricity systems necessitating solutions like storage and blending.

The podcast can be found on their website.

Underground Hydrogen Storage (UHS) provides a large-scale and safe solution to balance the fluctuations in energy production from renewable sources and energy consumption but requires a proper and detailed characterization of the candidate reservoirs. The scope of this study was to estimate the hydrogen diffusion coefficient for real caprock samples from two natural gas storage reservoirs that are candidates for underground hydrogen storage. A significant number of adsorption/desorption tests were carried out using a Dynamic Gravimetric Vapor/Gas Sorption System. A total of 15 samples were tested at the reservoir temperature of 45 °C and using both hydrogen and methane. For each sample two tests were performed with the same gas. Each test included four partial pressure steps of sorption alternated with desorption. After applying overshooting and buoyancy corrections the data were then interpreted using the early time approximation of the solution to the diffusion equation. Each interpretable partial pressure step provided a value of the diffusion coefficient. In total more than 90 estimations of the diffusion coefficient out of 120 partial pressure steps were available allowing a thorough comparison between the diffusion of hydrogen and methane: hydrogen in the range of 1 × 10−10 m2 /s to 6 × 10−8 m2 /s and methane in the range of 9 × 10−10 m2 /s to 2 × 10−8 m2 /s. The diffusion coefficients measured on wet samples are 2 times lower compared to those measured on dry samples. Hysteresis in hydrogen adsorption/desorption was also observed.

This review presents a state-of-the-art of geochemical geomechanical and hydrodynamic modelling studies in the Underground Hydrogen Storage (UHS) domain. Geochemical modelling assessed the reactivity of hydrogen and res pective fluctuations in hydrogen losses using kinetic reaction rates rock mineralogy brine salinity and the integration of hydrogen redox reactions. Existing geomechanics studies offer an array of coupled hydromechanical models suggesting a decline in rock failure during the withdrawal phase in aquifers compared to injection phase. Hydrodynamic modelling evaluations indicate the critical importance of relative permeability hysteresis in determining the UHS performance. Solubility and diffusion of hydrogen gas appear to have minimal impact on UHS. Injection and production rates cushion gas deployment and reservoir heterogeneity however significantly affect the UHS performance stressing the need for thorough modelling and experimental studies. Most of the current UHS modelling efforts focus on assessing the hydrodynamic aspects which are crucial for understanding the viability and safety of UHS. In contrast the lesser-explored geochemical and geomechanical considerations point to potential research gaps. A variety of modelling software tools such as CMG Eclipse COMSOL and PHREEQC evaluated those UHS underlying effects along with a few recent applications of datadriven-based Machine Learning (ML) techniques for enhanced accuracy. This review identified several unresolved challenges in UHS modelling: pronounced lack of expansive datasets leading to a gap between model predictions and their practical reliability; need robust methodologies capable of capturing natural subsurface heterogeneity while upscaling from precise laboratory data to field-scale conditions; demanding intensive computational resources and novel strategies to enhance simulation efficiency; and a gap in addressing geological uncertainties in subsurface environments suggesting that methodologies from oil reservoir simulations could be adapted for UHS. This comprehensive review offers a critical synthesis of the prevailing approaches challenges and research gaps in the domain of UHS thus providing a valuable reference document for further modelling efforts facilitating the informed advancements in this critical domain towards the realization of sustainable energy solutions.

Hydrogen as a primary carbon-free energy carrier is confronted by challenges in storage and transportation. However liquid organic hydrogen carriers (LOHCs) present a promising solution for storing and transporting hydrogen at ambient temperature and atmospheric pressure. Unlike circular energy carriers such as methanol ammonia and synthetic natural gas LOHCs do not produce by-products during hydrogen recovery. LOHCs only act as hydrogen carriers and the carriers can also be recycled for reuse. Although there are considerable advantages to LOHCs there are also some drawbacks especially relative to the energy consumption during the dehydrogenation step of the LOHC recycling. This review summarizes the recent progresses in LOHC technologies focusing on catalyst developments process and reactor designs applications and techno-economic assessments (TEA). LOHC technologies can potentially offer significant benefits to Australia especially in terms of hydrogen as an export commodity. LOHCs can help avoid capital costs associated with infrastructure such as transportation vessels while reducing hydrogen loss during transportation such as in the case of liquid hydrogen (LH2). Additionally it minimises CO2 emissions as observed in methane and methanol reforming. Thus it is essential to dedicate more efforts to explore and develop LOHC technologies in the Australian context.