Applications & Pathways
Acorn: Developing Full-chain Industrial Carbon Capture and Storage in a Resource- and Infrastructure-rich Hydrocarbon Province
Jun 2019
Publication
Juan Alcalde,
Niklas Heinemann,
Leslie Mabon,
Richard H. Worden,
Heleen de Coninck,
Hazel Robertson,
Marko Maver,
Saeed Ghanbari,
Floris Swennenhuis,
Indira Mann,
Tiana Walker,
Sam Gomersal,
Clare E. Bond,
Michael J. Allen,
Stuart Haszeldine,
Alan James,
Eric J. Mackay,
Peter A. Brownsort,
Daniel R. Faulkner and
Steve Murphy
Research to date has identified cost and lack of support from stakeholders as two key barriers to the development of a carbon dioxide capture and storage (CCS) industry that is capable of effectively mitigating climate change. This paper responds to these challenges through systematic evaluation of the research and development process for the Acorn CCS project a project designed to develop a scalable full-chain CCS project on the north-east coast of the UK. Through assessment of Acorn's publicly-available outputs we identify strategies which may help to enhance the viability of early-stage CCS projects. Initial capital costs can be minimised by infrastructure re-use particularly pipelines and by re-use of data describing the subsurface acquired during oil and gas exploration activity. Also development of the project in separate stages of activity (e.g. different phases of infrastructure re-use and investment into new infrastructure) enables cost reduction for future build-out phases. Additionally engagement of regional-level policy makers may help to build stakeholder support by situating CCS within regional decarbonisation narratives. We argue that these insights may be translated to general objectives for any CCS project sharing similar characteristics such as legacy infrastructure industrial clusters and an involved stakeholder-base that is engaged with the fossil fuel industry.
Fuel Cell Electric Vehicle as a Power Plant and SOFC as a Natural Gas Reformer: An Exergy Analysis of Different System Designs
Apr 2016
Publication
Delft University of Technology under its ‘‘Green Village” programme has an initiative to build a power plant (car parking lot) based on the fuel cells used in vehicles for motive power. It is a trigeneration system capable of producing electricity heat and hydrogen. It comprises three main zones: a hydrogen production zone a parking zone and a pump station zone. This study focuses mainly on the hydrogen production zone which assesses four different system designs in two different operation modes of the facility: Car as Power Plant (CaPP) mode corresponding to the open period of the facility which uses fuel cell electric vehicles (FCEVs) as energy and water producers while parked; and Pump mode corresponding to the closed period which compresses the hydrogen and pumps to the vehicle’s fuel tank. These system designs differ by the reforming technology: the existing catalytic reformer (CR) and a solid oxide fuel cell operating as reformer (SOFCR); and the option of integrating a carbon capture and storage (CCS). Results reveal that the SOFCR unit significantly reduces the exergy destruction resulting in an improvement of efficiency over 20% in SOFCR-based system designs compared to CR-based system designs in both operation modes. It also mitigates the reduction in system efficiency by integration of a CCS unit achieving a value of 2% whereas in CR-based systems is 7–8%. The SOFCR-based system running in Pump mode achieves a trigeneration efficiency of 60%.
Environmental Sustainability of Renewable Hydrogen in Comparison with Conventional Cooking Fuels
Jun 2018
Publication
Hydrogen could be used as a ‘cleaner’ cooking fuel particularly in communities that rely on biomass and fossil fuels to reduce local pollution and related health effects. However hydrogen must be produced using sustainable feedstocks and energy sources to ensure that local impacts are not reduced at the expense of other impacts generated elsewhere in the life cycle. To this end this paper evaluates life cycle environmental impacts of renewable hydrogen produced in a proton-exchange membrane electrolyser using solar energy. The aim of the study is to find out if hydrogen produced in this system and used as a cooking fuel is environmentally sustainable in comparison with conventional cooking fuels typically used in developing countries such as liquefied petroleum gas (LPG) charcoal and firewood. The results suggest that hydrogen would reduce the climate change impact by 2.5–14 times to 0.04 kg CO2 eq./MJ compared to firewood (0.10 kg CO2 eq./MJ) and LPG (0.57 kg CO2 eq./MJ). Some other impacts would also be lower by 6%–35 times including depletion of fossil fuels summer smog and health effects from emissions of particulates both locally and across the rest of the life cycle. However some other impacts would increase by 6%–6.7 times such as depletion of metals and freshwater and marine ecotoxicity. These are mainly due to the solar photovoltaic panels used to generate power for the electrolyser. In terms of the local impacts the study suggests that hydrogen would reduce local pollution and related health impacts by 8%–35 times. However LPG is still environmentally a better option than hydrogen for most of the impacts both at the point of use and on a life cycle basis.
Acoustic and Psychoacoustic Levels from an Internal Combustion Engine Fueled by Hydrogen vs. Gasoline
Feb 2022
Publication
Whereas noise generated by road traffic is an important factor in urban pollution little attention has been paid to this issue in the field of hydrogen-fueled vehicles. The objective of this study is to analyze the influence of the type of fuel (gasoline or hydrogen) on the sound levels produced by a vehicle with an internal combustion engine. A Volkswagen Polo 1.4 vehicle adapted for its bi-fuel hydrogen-gasoline operation has been used. Tests were carried out with the vehicle when stationary to eliminate rolling and aerodynamic noise. Acoustics and psychoacoustics levels were measured both inside and outside the vehicle. A slight increase in the noise level has only been found outside when using hydrogen as fuel compared to gasoline. The increase is statistically significant can be quantified between 1.1 and 1.7 dBA and is mainly due to an intensification of the 500 Hz band. Loudness is also higher outside the vehicle (between 2 and 4 sones) when the fuel is hydrogen. Differences in sharpness and roughness values are lower than the just-noticeable difference (JND) values of the parameters. Higher noise levels produced by hydrogen can be attributed to its higher reactivity compared to gasoline.
Numerical Evaluation of the Effect of Fuel Blending with CO2 and H2 on the Very Early Corona‐Discharge Behavior in Spark Ignited Engines
Feb 2022
Publication
Reducing green‐house gases emission from light‐duty vehicles is compulsory in order to slow down the climate change. The application of High Frequency Ignition systems based on the Corona discharge effect has shown the potential to extend the dilution limit of engine operating conditions promoting lower temperatures and faster combustion events thus higher thermal and indicating efficiency. Furthermore predicting the behavior of Corona ignition devices against new sustainable fuel blends including renewable hydrogen and biogas is crucial in order to deal with the short‐intermediate term fleet electric transition. The numerical evaluation of Corona‐induced discharge radius and radical species under those conditions can be helpful in order to capture local effects that could be reached only with complex and expensive optical investigations. Using an ex‐ tended version of the Corona one‐dimensional code previously published by the present authors the simulation of pure methane and different methane–hydrogen blends and biogas–hydrogen blends mixed with air was performed. Each mixture was simulated both for 10% recirculated exhaust gas dilution and for its corresponding dilute upper limit which was estimated by means of chemical kinetics simulations integrated with a custom misfire detection criterion.
Models of Delivery of Sustainable Public Transportation Services in Metropolitan Areas–Comparison of Conventional, Battery Powered and Hydrogen Fuel-Cell Drives
Nov 2021
Publication
The development of public transport systems is related to the implementation of modern and low-carbon vehicles. Over the last several years there has been a clear progress in this field. The number of electric buses has increased and the first solutions in the area of hydrogen fuel cells have been implemented. Unfortunately the implementation of these technologies is connected with significant financial expenditure. The goal of the article is the analysis of effectiveness of financial investment consisting in the purchase of 30 new public transport buses (together with the necessary infrastructure–charging stations). The analysis has been performed using the NPV method for the period of 10 years. Discount rate was determined on 4% as recommended by the European Commission for this type of project. It is based on the case study of the investment project carried out by Metropolis GZM in Poland. The article determines and compares the efficiency ratios for three investment options-purchase of diesel-powered battery-powered and hydrogen fuel-cell electric vehicles. The results of the analysis indicate that the currently high costs of vehicle purchase and charging infrastructure are a significant barrier for the implementation of battery-powered and hydrogen fuel-cell buses. In order to meet the transport policy goals related to the exchange of traditional bus stock to more eco-friendly vehicles it is necessary to involve public funds for the purpose of financing the investment activities.
Hydrogen from Natural Gas – The Key to Deep Decarbonisation
Jul 2019
Publication
This Discussion Paper was commissioned by Zukunft ERDGAS to contribute to the debate concerning the deep decarbonisation of the European energy sector required to meet the Paris Agreement targets. Previous discussion papers have put forward decarbonisation pathways that rely heavily on ‘All-Electric’ solutions. These depend predominantly on renewable electricity to deliver decarbonisation of all sectors. This paper offers an alternative to an ‘All-Electric’ solution by building an alternative pathway that allows the inclusion of gas based technologies alongside the ‘All-Electric’ pathway technologies. The new pathway demonstrates that hydrogen from natural gas can be an essential complement to renewable electricity. The pathway also considers the benefits of utilising methane pyrolysis technology in Europe to produce zero carbon hydrogen.
Read the full report at this link
Read the full report at this link
Hydrogen for Transport
Oct 2019
Publication
The Australian transport sector is under increasing pressure to reduce carbon emissions whilst also managing a fuel supply chain that relies heavily on foreign import partners.
Transport in Australia equates to a significant proportion (approximately 18%) of the country’s total greenhouse gas emissions. Due to ongoing population growth these emissions have been steadily rising with the increase of cars on our roads and freight trucks in transit. Coupled with this the transport fuel supply chain is highly reliant on overseas partners – Australia currently imports 90% of its liquid fuel. These two challenges present an interesting dichotomy for the industry incentivising research and development into new technologies that can address one or both of these issues.
Hydrogen is one technology that has the potential to provide a reduction in greenhouse gas emissions as well as a more reliable domestic fuel supply. Hydrogen fuel cell electric vehicles (FCEVs) are an emerging zero-emission alternative for the transport sector which offer a variety of benefits.
Available from the Energy Ministers Website link here
Transport in Australia equates to a significant proportion (approximately 18%) of the country’s total greenhouse gas emissions. Due to ongoing population growth these emissions have been steadily rising with the increase of cars on our roads and freight trucks in transit. Coupled with this the transport fuel supply chain is highly reliant on overseas partners – Australia currently imports 90% of its liquid fuel. These two challenges present an interesting dichotomy for the industry incentivising research and development into new technologies that can address one or both of these issues.
Hydrogen is one technology that has the potential to provide a reduction in greenhouse gas emissions as well as a more reliable domestic fuel supply. Hydrogen fuel cell electric vehicles (FCEVs) are an emerging zero-emission alternative for the transport sector which offer a variety of benefits.
Available from the Energy Ministers Website link here
Australian and Global Hydrogen Demand Growth Scenario Analysis
Nov 2019
Publication
Deloitte was commissioned by the National Hydrogen Taskforce established by the COAG Energy Council to undertake an Australian and Global Growth Scenario Analysis. Deloitte analysed the current global hydrogen industry its development and growth potential and how Australia can position itself to best capitalise on the newly forming industry.
To conceptualise the possibilities for Australia Deloitte created scenarios to model the realm of possibilities for Australia out to 2050 focusing on identifying the scope and distribution of economic and environmental costs and benefits from Australian hydrogen industry development. This work will aid in analysing the opportunities and challenges to hydrogen industry development in Australia and the actions needed to overcome barriers to industry growth manage risks and best drive industry development.
The full report is available on the Deloitte website at this link
To conceptualise the possibilities for Australia Deloitte created scenarios to model the realm of possibilities for Australia out to 2050 focusing on identifying the scope and distribution of economic and environmental costs and benefits from Australian hydrogen industry development. This work will aid in analysing the opportunities and challenges to hydrogen industry development in Australia and the actions needed to overcome barriers to industry growth manage risks and best drive industry development.
The full report is available on the Deloitte website at this link
Hydrogen: Untapped Energy?
Jan 2012
Publication
Hydrogen has potential applications across our future energy systems due particularly to its relatively high energy weight ratio and because it is emission-free at the point of use. Hydrogen is also abundant and versatile in the sense that it could be produced from a variety of primary energy sources and chemical substances including water and used to deliver power in a variety of applications including fuel cell combined heat and power technologies. As a chemical feedstock hydrogen has been used for several decades and such expertise could be fed back into the relatively new areas of utilising hydrogen to meet growing energy demands.<br/>The UK interest in hydrogen is also growing with various industrial academic and governmental organisations investigating how hydrogen could be part of a diverse portfolio of options for a low carbon future. While hydrogen as an alternative fuel is yet to command mass-appeal in the UK energy market IGEM believes hydrogen is capable of allowing us to use the wide range of primary energy sources at our disposal in a much greener and sustainable way.<br/>IGEM also sees hydrogen playing a small but key role in the gas industry whereby excess renewable energy is used to generate hydrogen which is then injected into the gas grid for widespread distribution and consumption. Various studies suggest admixtures containing up to 10 – 50%v/v hydrogen could be safely administered into the existing natural gas infrastructure. However IGEM understands that this would currently not be permissible under the Gas Safety (Management) Regulations (GS(M)R) for gas conveyance here in the UK. Also proper assessments of the risks associated with adding hydrogen to natural gas streams will need to be performed so that such systems can be managed effectively.<br/>IGEM has also identified a need for standards that cover the safety requirements of hydrogen technologies particularly those pertaining to installations in commercial or domestic environments. IGEM also recommend that the technical measures used to determine separation distances for hydrogen installations particularly refuelling stations are re-assessed through a systematic identification and control of potential sources of ignition.<br/>Hydrogen has the potential to be a significant fuel of the future and part of a diverse portfolio of energy options capable of meeting growing energy needs. This report therefore seeks to demonstrate how hydrogen could be a potential option for energy storage and power generation in a diverse energy system. It also aims to inform the readers on the current state of hydrogen here in the UK and abroad. This report has been assembled for IGEM members interested bodies and the general public.
Hydrogen Fuel Cell Road Vehicles and Their Infrastructure: An Option Towards an Environmentally Friendly Energy Transition
Nov 2020
Publication
The latest pre-production vehicles on the market show that the major technical challenges posed by integrating a fuel cell system (FCS) within a vehicle—compactness safety autonomy reliability cold starting—have been met. Regarding the ongoing maturity of fuel cell systems dedicated to road transport the present article examines the advances still needed to move from a functional but niche product to a mainstream consumer product. It seeks to address difficulties not covered by more traditional innovation approaches. At least in long-distance heavy-duty vehicles fuel cell vehicles (FCVs) are going to play a key role in the path to zero-emissions in one or two decades. Hence the present study also addresses the structuring elements of the complete chain: the latter includes the production storage and distribution of hydrogen. Green hydrogen appears to be one of the potential uses of renewable energies. The greener the electricity is the greater the advantage for hydrogen since it permits to economically store large energy quantities on seasonal rhythms. Moreover natural hydrogen might also become an economic reality pushing the fuel cell vehicle to be a competitive and environmentally friendly alternative to the battery electric vehicle. Based on its own functional benefits for on board systems hydrogen in combination with the fuel cell will achieve a large-scale use of hydrogen in road transport as soon as renewable energies become more widespread. Its market will expand from large driving range and heavy load vehicles
Expectations, Attitudes, and Preferences Regarding Support and Purchase of Eco-friendly Fuel Vehicles
Apr 2019
Publication
This study analyses public expectations attitudes and preferences to support and purchase eco-friendly fuel vehicles. The study used a telephone survey of a sample of residents in Greater Stavanger Norway. Two cluster analyses were conducted to group the individuals based on expectations and attitudes toward eco-friendly fuel vehicles. In addition two multivariate analyses were performed to explore the determinants of support and willingness to purchase eco-friendly fuel vehicles. The study found three components of expectation to support eco-friendly fuel vehicles namely cost comfort and safety. The analysis further found four components to explain attitudes to support eco-friendly fuel vehicles: personal norm pro-technology awareness of priority and environmental degradation. Multivariate analyses confirmed that age gender and the number of cars in the household are likely to influence public preferences to support and purchase eco-friendly fuel vehicles. The results reveal that individuals tend to support the eco-friendly vehicles when the technologies meet their expectations towards cost and safety but the cost expectation is the significant factor that results in the decision to purchase the eco-friendly vehicles. The study also found that the pro-technology attitude has influenced the propensity to support and purchase the eco-friendly fuel vehicles.
Gaseous Fueling of an Adapted Commercial Automotive Spark-ignition Engine: Simplified Thermodynamic Modeling and Experimental Study Running on Hydrogen, Methane, Carbon Monoxide and their Mixtures
Dec 2022
Publication
In the present work methane carbon monoxide hydrogen and the binary mixtures 20 % CH4–80 % H2 80 % CH4–20 % H2 25 % CO–75 % H2 (by volume) were considered as fuels of a naturally aspirated port-fuel injection four-cylinder Volkswagen 1.4 L spark-ignition (SI) engine. The interest in these fuels lies in the fact that they can be obtained from renewable resources such as the fermentation or gasification of residual biomasses as well as the electrolysis of water with electricity of renewable origin in the case of hydrogen. In addition they can be used upon relatively easy modifications of the engines including the retrofitting of existing internal combustion engines. It has been found that the engine gives similar performance regardless the gaseous fuel nature if the air–fuel equivalence ratio (λ) is the same. Maximum brake torque and mean effective pressure values within 45–89 N⋅m and 4.0–8.0 bar respectively have been obtained at values of λ between 1 and 2 at full load engine speed of 2000 rpm and optimum spark-advance. In contrast the nature of the gaseous fuel had great influence upon the range of λ values at which a fuel (either pure or blend) could be used. Methane and methane-rich mixtures with hydrogen or carbon monoxide allowed operating the engine at close to stoichiometric conditions (i.e. 1 < λ < 1.5) yielding the highest brake torque and mean effective pressure values. On the contrary hydrogen and hydrogen-rich mixtures with methane or carbon monoxide could be employed only in the very fuel-lean region (i.e. 1.5 < λ < 2). The behavior of carbon monoxide was intermediate between that of methane and hydrogen. The present study extends and complements previous works in which the aforementioned fuels were compared only under stoichiometric conditions in air (λ = 1). In addition a simple zero-dimensional thermodynamic combustion model has been developed that allows describing qualitatively the trends set by the several fuels. Although the model is useful to understand the influence of the fuels properties on the engine performance its predictive capability is limited by the simplifications made.
Electricity-based Plastics and their Potential Demand for Electricity and Carbon Dioxide
Apr 2020
Publication
In a future fossil-free circular economy the petroleum-based plastics industry must be converted to non-fossil feedstock. A known alternative is bio-based plastics but a relatively unexplored option is deriving the key plastic building blocks hydrogen and carbon from electricity through electrolytic processes combined with carbon capture and utilization technology. In this paper the future demand for electricity and carbon dioxide is calculated under the assumption that all plastic production is electricity-based in the EU by 2050. The two most important input chemicals are ethylene and propylene and the key finding of this paper is that the electricity demand to produce these are estimated to 20 MWh/ton ethylene and 38 MWh/ton propylene and that they both could require about 3 tons of carbon dioxide/ton product. With constant production levels this implies an annual demand of about 800 TWh of electricity and 90 Mton of carbon dioxide by 2050 in the EU. If scaled to the total production of plastics including all input hydrocarbons in the EU the annual demand is estimated to 1600 TWh of electricity and 180 Mton of carbon dioxide. This suggests that a complete shift to electricity-based plastics is possible from a resource and technology point of view but production costs may be 2 to 3 times higher than today. However the long time frame of this paper creates uncertainties regarding the results and how technical economic and social development may influence them. The conclusion of this paper is that electricity-based plastics integrated with bio-based production can be an important option in 2050 since biomass resources are scarce but electricity from renewable sources is abundant.
A Battery-Free Sustainable Powertrain Solution for Hydrogen Fuel Cell City Transit Bus Application
Apr 2022
Publication
The paper presents a sustainable electric powertrain for a transit city bus featuring an electrochemical battery-free power unit consisting of a hydrogen fuel cell stack and a kinetic energy storage system based on high-speed flywheels. A rare-earth free high-efficiency motor technology is adopted to pursue a more sustainable vehicle architecture by limiting the use of critical raw materials. A suitable dynamic energetic model of the full vehicle powertrain has been developed to investigate the feasibility of the traction system and the related energy management control strategy. The model includes losses characterisation as a function of the load of the main components of the powertrain by using experimental tests and literature data. The performance of the proposed solution is evaluated by simulating a vehicle mission on an urban path in real traffic conditions. Considerations about the effectiveness of the traction system are discussed.
Economic Analysis of a High-pressure Urban Pipeline Concept (HyLine) for Delivering Hydrogen to Retail Fueling Stations
Nov 2019
Publication
Reducing the cost of delivering hydrogen to fuelling stations and dispensing it into fuel cell electric vehicles (FCEVs) is one critical element of efforts to increase the cost-competitiveness of FCEVs. Today hydrogen is primarily delivered to stations by trucks. Pipeline delivery is much rarer: one urban U.S. station has been supplied with 800-psi hydrogen from an industrial hydrogen pipeline since 2011 and a German station on the edge of an industrial park has been supplied with 13000-psi hydrogen from a pipeline since 2006. This article compares the economics of existing U.S. hydrogen delivery methods with the economics of a high-pressure scalable intra-city pipeline system referred to here as the “HyLine” system. In the HyLine system hydrogen would be produced at urban industrial or commercial sites compressed to 15000 psi stored at centralized facilities delivered via high-pressure pipeline to retail stations and dispensed directly into FCEVs. Our analysis of retail fuelling station economics in Los Angeles suggests that as FCEV demand for hydrogen in an area becomes sufficiently dense pipeline hydrogen delivery gains an economic advantage over truck delivery. The HyLine approach would also enable cheaper dispensed hydrogen compared with lower-pressure pipeline delivery owing to economies of scale associated with integrated compression and storage. In the largest-scale fuelling scenario analyzed (a network of 24 stations with capacities of 1500 kg/d each and hydrogen produced via steam methane reforming) HyLine could potentially achieve a profited hydrogen cost of $5.3/kg which is approximately equivalent to a gasoline cost of $2.7/gal (assuming FCEVs offer twice the fuel economy of internal combustion engine vehicles and vehicle cost is competitive). It is important to note that significant effort would be required to develop technical knowledge codes and standards that would enable a HyLine system to be viable. However our preliminary analysis suggests that the HyLine approach merits further consideration based on its potential economic advantages. These advantages could also include the value of minimizing retail space used by hydrogen compression and storage sited at fuelling stations which is not reflected in our analysis.
Transport Pathway to Hydrogen webinar
Mar 2021
Publication
Webinar to accompany the launch of the Cadent Future Role of Gas in Transport report which can be found here
On-Board Liquid Hydrogen Cold Energy Utilization System for a Heavy-Duty Fuel Cell Hybrid Truck
Aug 2021
Publication
In this paper a kind of on-board liquid hydrogen (LH2 ) cold energy utilization system for a heavy-duty fuel cell hybrid truck is proposed. Through this system the cold energy of LH2 is used for cooling the inlet air of a compressor and the coolant of the accessories cooling system sequentially to reduce the parasitic power including the air compressor water pump and radiator fan power. To estimate the cold energy utilization ratio and parasitic power saving capabilities of this system a model based on AMESim software was established and simulated under different ambient temperatures and fuel cell stack loads. The simulation results show that cold energy utilization ratio can keep at a high level except under extremely low ambient temperature and light load. Compared to the original LH2 system without cold energy utilization the total parasitic power consumption can be saved by up to 15% (namely 1.8 kW).
Gas Goes Green: A System for All Seasons
Oct 2021
Publication
‘A System For All Seasons’ analyses Britain’s electricity generation and consumption trends concluding that the country’s wind and solar farms will have enough spare electricity generated in spring and summer when demand is lower to produce green hydrogen to the equivalent capacity of 25 Hinkley Point C nuclear power plants.
The hydrogen stored would provide the same amount of energy needed for every person in the UK to charge a Tesla Model S electric vehicle more than 21 times in the autumn and winter months when energy demand is highest creating a clean energy buffer that avoids having to manage limited energy supplies on the international markets.
Crucially the research finds that the UK has enough capacity to store the hydrogen in a combination of salt caverns and disused oil and gas fields in the North Sea as well other locations to meet this demand.
The research also finds that using renewable hydrogen will help reduce the total number of wind farms needed in 2050 by more than 75% because it will ensure electricity generated by Britain’s wind farms is used as efficiently as possible by avoiding surplus electricity going to waste.
‘A System For All Seasons’ finds that:
The hydrogen stored would provide the same amount of energy needed for every person in the UK to charge a Tesla Model S electric vehicle more than 21 times in the autumn and winter months when energy demand is highest creating a clean energy buffer that avoids having to manage limited energy supplies on the international markets.
Crucially the research finds that the UK has enough capacity to store the hydrogen in a combination of salt caverns and disused oil and gas fields in the North Sea as well other locations to meet this demand.
The research also finds that using renewable hydrogen will help reduce the total number of wind farms needed in 2050 by more than 75% because it will ensure electricity generated by Britain’s wind farms is used as efficiently as possible by avoiding surplus electricity going to waste.
‘A System For All Seasons’ finds that:
- Britain’s wind and solar farms could generate between 60-80GW of renewable hydrogen - the equivalent capacity of 25 Hinkley Point C nuclear power plants - from spare renewable electricity generated in the spring and summer months between May and October each year.
- Running the energy system this way will reduce the need for the total electricity generating capacity of UK wind farms from 500-600GW by 2050 down to 140-190GW – a reduction of up to 76%.
- It would mean Great Britain would be using spare renewable electricity that would otherwise go to waste to produce green hydrogen. Under the alternative scenario additional wind farms would need to be built to accommodate for autumn and wind energy demand peaks but be left unused during other times of the year.
- With 140-190GW of wind generation capacity 115 to 140TWh of green hydrogen would be stored – enough energy for every person in the UK to charge a Tesla Model S more than 21 times.
- The potential storage volume from Britain’s salt fields ranges from >1TWh up to 30TWh. For disused oil and gas fields the potential storage volume for individual sites ranges from ~1TWh up to 330TWh.
Microbial Fuel Cells: Technologically Advanced Devices and Approach for Sustainable/renewable Energy Development
Dec 2021
Publication
There is a huge quantity of energy needs/demands for multiple developmental and domestic activities in the modern era. And in this context consumption of more non-renewable energy is reported and created many problems or issues (availability of fossil fuel stocks in the future period causes a huge quantity of toxic gases or particles or climatic change effects) at the global level. And only sustainable or renewable fuel development can provide alternate fuel and we report from various biological agents processes including microbial biofuel cell applications for future energy needs only. These will not cause any interference in natural resources or services. Microbial biofuel cells utilize the living cell to produce bioelectricity via bioelectrochemical system. It can drive electricity or other energy generation currents via lived cell interaction. Microbial fuel cells (MFCs) and enzymatic biofuel cells with their advancement in design can improve sustainable bio-energy production by proving an efficient conversion system compared to chemical fuels into electric power. Different types of MFCs operation are reported in wastewater treatment with biogas biohydrogen and other biofuel/energy generation. Later biogas can convert into electric power. Hybrid microbial biofuel cell utility with photochemical reaction is found for electricity generation. Recent research and development in microbial biofuel design and its application will emphasize bioenergy for the future.
The Role of Hydrogen in Achieving Net Zero: Parliamentary Inquiry
Mar 2021
Publication
A key component of the Government's recently announced ‘Ten Point Plan for a Green Industrial Revolution’ is 'Driving the Growth of Low Carbon Hydrogen'. The plan outlined a range of measures to support the development and adoption of hydrogen including a £240 million 'Net Zero Hydrogen Fund'. Noting this and the further £81 million allocated for hydrogen heating trials in the 2020 Spending Review the House of Commons Science and Technology Committee is today launching a new inquiry into the role of hydrogen in achieving Net Zero.
Following recommendations from the Committee on Climate Change that the Government develop a strategy for hydrogen use and should aim for largescale hydrogen trials to begin in the early 2020s the Committee seeks to ensure that the Government's intended plan will be suitable and effective. The Committee will also assess the infrastructure required for hydrogen as a Net Zero fuel and examine progress made so far internationally to determine the viability of hydrogen as a significant contributor to achieving Net Zero.
All documents are in the Supplements tab above.
Following recommendations from the Committee on Climate Change that the Government develop a strategy for hydrogen use and should aim for largescale hydrogen trials to begin in the early 2020s the Committee seeks to ensure that the Government's intended plan will be suitable and effective. The Committee will also assess the infrastructure required for hydrogen as a Net Zero fuel and examine progress made so far internationally to determine the viability of hydrogen as a significant contributor to achieving Net Zero.
All documents are in the Supplements tab above.
Assessing Uncertainties of Well-To-Tank Greenhouse Gas Emissions from Hydrogen Supply Chains
Jun 2017
Publication
Hydrogen is a promising energy carrier in the clean energy systems currently being developed. However its effectiveness in mitigating greenhouse gas (GHG) emissions requires conducting a lifecycle analysis of the process by which hydrogen is produced and supplied. This study focuses on the hydrogen for the transport sector in particular renewable hydrogen that is produced from wind- or solar PV-powered electrolysis. A life cycle inventory analysis is conducted to evaluate the Well-to-Tank (WtT) GHG emissions from various renewable hydrogen supply chains. The stages of the supply chains include hydrogen being produced overseas converted into a transportable hydrogen carrier (liquid hydrogen or methylcyclohexane) imported to Japan by sea distributed to hydrogen filling stations restored from the hydrogen carrier to hydrogen and filled into fuel cell vehicles. For comparison an analysis is also carried out with hydrogen produced by steam reforming of natural gas. Foreground data related to the hydrogen supply chains are collected by literature surveys and the Japanese life cycle inventory database is used as the background data. The analysis results indicate that some of renewable hydrogen supply chains using liquid hydrogen exhibited significantly lower WtT GHG emissions than those of a supply chain of hydrogen produced by reforming of natural gas. A significant piece of the work is to consider the impacts of variations in the energy and material inputs by performing a probabilistic uncertainty analysis. This suggests that the production of renewable hydrogen its liquefaction the dehydrogenation of methylcyclohexane and the compression of hydrogen at the filling station are the GHG-intensive stages in the target supply chains.
Synergistic Hybrid Marine Renewable Energy Harvest System
Mar 2024
Publication
This paper proposes a novel hybrid marine renewable energy-harvesting system to increase energy production reduce levelized costs of energy and promote renewable marine energy. Firstly various marine renewable energy resources and state-of-art technologies for energy exploitation and storage were reviewed. The site selection criteria for each energy-harvesting approach were identified and a scoring matrix for site selection was proposed to screen suitable locations for the hybrid system. The Triton Knoll wind farm was used to demonstrate the effectiveness of the scoring matrix. An integrated energy system was designed and FE modeling was performed to assess the effects of additional energy devices on the structural stability of the main wind turbine structure. It has been proven that the additional energy structures have a negligible influence on foundation/structure deflection.
Thermodynamic Analysis of a Regenerative Brayton Cycle Using H2, CH4 and H2/CH4 Blends as Fuel
Feb 2022
Publication
Considering a simple regenerative Brayton cycle the impact of using different fuel blends containing a variable volumetric percentage of hydrogen in methane was analysed. Due to the potential of hydrogen combustion in gas turbines to reduce the overall CO2 emissions and the dependency on natural gas further research is needed to understand the impact on the overall thermodynamic cycle. For that purpose a qualitative thermodynamic analysis was carried out to assess the exergetic and energetic efficiencies of the cycle as well as the irreversibilities associated to a subsystem. A single step reaction was considered in the hypothesis of complete combustion of a generic H2/CH4 mixture where the volumetric H2 percentage was represented by fH2 which was varied from 0 to 1 defining the amount of hydrogen in the fuel mixture. Energy and entropy balances were solved through the Engineering Equation Solver (EES) code. Results showed that global exergetic and energetic efficiencies increased by 5% and 2% respectively varying fH2 from 0 to 1. Higher hydrogen percentages resulted in lower exergy destruction in the chamber despite the higher air-excess levels. It was also observed that higher values of fH2 led to lower fuel mass flow rates in the chamber showing that hydrogen can still be competitive even though its cost per unit mass is twice that of natural gas.
Integral Sliding Mode Control for Maximum Power Point Tracking in DFIG Based Floating Offshore Wind Turbine and Power to Gas
Jun 2021
Publication
This paper proposes a current decoupling controller for a Doubly-fed Induction Generator (DFIG) based on floating offshore wind turbine and power to gas. The proposed controller realizes Maximum Power Point Tracking (MPPT) through integral sliding mode compensation. By using the internal model control strategy an open-loop controller is designed to ensure that the system has good dynamic performance. Furthermore using the integral Sliding Mode Control (SMC) strategy a compensator is designed to eliminate the parameter perturbation and external disturbance of the open-loop control. The parameters of the designed controller are designed through Grey Wolf Optimization (GWO). Simulation results show that the proposed control strategy has better response speed and smaller steady-state error than the traditional control strategy. This research is expected to be applied to the field of hydrogen production by floating offshore wind power.
Hydrogen Refuelling Reference Station Lot Size Analysis for Urban Sites
Mar 2020
Publication
Hydrogen Fuelling Infrastructure Research and Station Technology (H2FIRST) is a project initiated by the DOE in 2015 and executed by Sandia National Laboratories and the National Renewable Energy Laboratory to address R&D barriers to the deployment of hydrogen fuelling infrastructure. One key barrier to the deployment of fuelling stations is the land area they require (i.e. ""footprint""). Space is particularly a constraint in dense urban areas where hydrogen demand is high but space for fuelling stations is limited. This work presents current fire code requirements that inform station footprint then identifies and quantifies opportunities to reduce footprint without altering the safety profile of fuelling stations. Opportunities analyzed include potential new methods of hydrogen delivery as well as alternative placements of station technologies (i.e. rooftop/underground fuel storage). As interest in heavy-duty fuelling stations and other markets for hydrogen grows this study can inform techniques to reduce the footprint of heavy-duty stations as well.
This work characterizes generic designs for stations with a capacity of 600 kg/day hydrogen dispensed and 4 dispenser hoses. Three base case designs (delivered gas delivered liquid and on-site electrolysis production) have been modified in 5 different ways to study the impacts of recently released fire code changes colocation with gasoline refuelling alternate delivery assumptions underground storage of hydrogen and rooftop storage of hydrogen resulting in a total of 32 different station designs. The footprints of the base case stations range from 13000 to 21000 ft2.
A significant focus of this study is the NFPA 2 requirements especially the prescribed setback distances for bulk gaseous or liquid hydrogen storage. While the prescribed distances are large in some cases these setback distances are found to have a nuanced impact on station lot size; considerations of the delivery truck path traffic flow parking and convenience store location are also important. Station designs that utilize underground and rooftop storage can reduce footprint but may not be practical or economical. For example burying hydrogen storage tanks underground can reduce footprint but the cost savings they enable depend on the cost of burial and the cost land. Siting and economic analysis of station lot sizes illustrate the benefit of smaller station footprints in the flexibility and cost savings they can provide. This study can be used as a reference that provides examples of the key design differences that fuelling stations can incorporate the approximate sizes of generic station lots and considerations that might be unique to particular designs.
This work characterizes generic designs for stations with a capacity of 600 kg/day hydrogen dispensed and 4 dispenser hoses. Three base case designs (delivered gas delivered liquid and on-site electrolysis production) have been modified in 5 different ways to study the impacts of recently released fire code changes colocation with gasoline refuelling alternate delivery assumptions underground storage of hydrogen and rooftop storage of hydrogen resulting in a total of 32 different station designs. The footprints of the base case stations range from 13000 to 21000 ft2.
A significant focus of this study is the NFPA 2 requirements especially the prescribed setback distances for bulk gaseous or liquid hydrogen storage. While the prescribed distances are large in some cases these setback distances are found to have a nuanced impact on station lot size; considerations of the delivery truck path traffic flow parking and convenience store location are also important. Station designs that utilize underground and rooftop storage can reduce footprint but may not be practical or economical. For example burying hydrogen storage tanks underground can reduce footprint but the cost savings they enable depend on the cost of burial and the cost land. Siting and economic analysis of station lot sizes illustrate the benefit of smaller station footprints in the flexibility and cost savings they can provide. This study can be used as a reference that provides examples of the key design differences that fuelling stations can incorporate the approximate sizes of generic station lots and considerations that might be unique to particular designs.
Hydrogen Powered Aviation: A Fact-based Study of Hydrogen Technology, Economics, and Climate Impact by 2050
Jul 2020
Publication
This report assesses the potential of hydrogen (H2) propulsion to reduce aviation’s climate impact. To reduce climate impact the industry will have to introduce further levers such as radically new technology significantly scale sustainable aviation fuels (SAF) such as synthetic fuel (synfuel) temporarily rely on offsets in large quantities or rely on a combination thereof. H2 propulsion is one such technology and this report assesses its potential in aviation. Developed with input from leading companies and research institutes it projects the technological development of H2 combustion and fuel cell-powered propulsion evaluates their technical and economic feasibility compares them to synfuel and considers implications on aircraft design airport infrastructure and fuel supply chains.
Recyclable Metal Fuels for Clean and Compact Zero-carbon Power
Jun 2018
Publication
Metal fuels as recyclable carriers of clean energy are promising alternatives to fossil fuels in a future low-carbon economy. Fossil fuels are a convenient and widely-available source of stored solar energy that have enabled our modern society; however fossil-fuel production cannot perpetually keep up with increasing energy demand while carbon dioxide emissions from fossil-fuel combustion cause climate change. Low-carbon energy carriers with high energy density are needed to replace the multiple indispensable roles of fossil fuels including for electrical and thermal power generation for powering transportation fleets and for global energy trade. Metals have high energy densities and metals are therefore fuels within many batteries energetic materials and propellants. Metal fuels can be burned with air or reacted with water to release their chemical energy at a range of power-generation scales. The metal-oxide combustion products are solids that can be captured and then be recycled using zero-carbon electrolysis processes powered by clean energy enabling metals to be used as recyclable zero-carbon solar fuels or electrofuels. A key technological barrier to the increased use of metal fuels is the current lack of clean and efficient combustor/reactor/engine technologies to convert the chemical energy in metal fuels into motive or electrical power (energy). This paper overviews the concept of low-carbon metal fuels and summarizes the current state of our knowledge regarding the reaction of metal fuels with water to produce hot hydrogen on demand and the combustion of metal fuels with air in laminar and turbulent flames. Many important questions regarding metal-fuel combustion processes remain unanswered as do questions concerning the energy-cycle efficiency and life-cycle environmental impacts and economics of metals as recyclable fuels. Metal fuels can be an important technology option within a future low-carbon society and deserve focused attention to address these open questions.
Trace Level Analysis of Reactive ISO 14687 Impurities in Hydrogen Fuel Using Laser-based Spectroscopic Detection Methods
Oct 2020
Publication
Hydrogen fuelled vehicles can play a key role in the decarbonisation of transport and reducing emissions. To ensure the durability of fuel cells a specification has been developed (ISO 14687) setting upper limits to the amount fraction of a series of impurities. Demonstrating conformity with this standard requires demonstrating by measurement that the actual levels of the impurities are below the thresholds. Currently the industry is unable to do so for measurement standards and sensitive dedicated analytical methods are lacking. In this work we report on the development of such measurement standards and methods for four reactive components: formaldehyde formic acid hydrogen chloride and hydrogen fluoride. The primary measurement standard is based on permeation and the analytical methods on highly sensitive and selective laser-based spectroscopic techniques. Relative expanded uncertainties at the ISO 14687 threshold level in hydrogen of 4% (formaldehyde) 8% (formic acid) 5% (hydrogen chloride) and 8% (hydrogen fluoride) have been achieved.
Multi-Objective Optimization of a Hydrogen Hub for the Decarbonization of a Port Industrial Area
Feb 2022
Publication
Green hydrogen is addressed as a promising solution to decarbonize industrial and mobility sectors. In this context ports could play a key role not only as hydrogen users but also as suppliers for industrial plants with which they have strong commercial ties. The implementation of hydrogen technologies in ports has started to be addressed as a strategy for renewable energy transition but still requires a detailed evaluation of the involved costs which cannot be separated from the correct design and operation of the plant. Hence this study proposes the design and operation optimization of a hydrogen production and storage system in a typical Italian port. Multi-objective optimization is performed to determine the optimal levelized cost of hydrogen in environmental and techno-economic terms. A Polymer Electrolyte Membrane (PEM) electrolyzer powered by a grid-integrated photovoltaic (PV) plant a compression station and two-pressure level storage systems are chosen to provide hydrogen to a hydrogen refueling station for a 20-car fleet and satisfy the demand of the hydrogen batch annealing in a steel plant. The results report that a 341 kWP PV plant 89 kW electrolyzer and 17 kg hydrogen storage could provide hydrogen at 7.80 €/kgH2 potentially avoiding about 153 tCO2eq/year (120 tCO2eq/year only for the steel plant).
Problems of Hydrogen Doping in the Methane Fermentation Process and of Energetic Use of the Gas Mixture
Jul 2021
Publication
This article discusses the technology for doping hydrogen into the fermenter to increase methane production and the amount of energy in the mixture. Hydrogen doping is anticipated to enable more carbon to be applied to produce methane. Hydrogen is proposed to be produced by using excess electricity from for example off-peak electricity hours at night. The possibilities of using a mixture of hydrogen and biogas for combustion in boilers and internal combustion engines have been determined. It has been proven that the volumetric addition of hydrogen reduces the heat of combustion of the mixture. Problems arising from hydrogen doping during the methane fermentation process have been identified.
Opportunities and Barriers of Hydrogen–Electric Hybrid Powertrain Vans: A Systematic Literature Review
Oct 2020
Publication
The environmental impact of the road transport sector together with urban freight transport growth has a notable repercussions in global warming health and economy. The need to reduce emissions caused by fossil fuel dependence and to foster the use of renewable energy sources has driven the development of zero-emissions powertrains. These clean transportation technologies are not only necessary to move people but to transport the increasing demand for goods and services that is currently taking place in the larger cities. Full electric battery-powered vans seem to be the best-placed solution to the problem. However despite the progress in driving range and recharge options those and other market barriers remain unsolved and the current market share of battery electric vehicles (BEVs) is not significant. Based on the development of hydrogen fuel cell stacks this work explains an emerging powertrain architecture concept for N1 class type vans that combines a battery-electric configuration with a fuel cell stack powered by hydrogen that works as a range extender (FC-EREV). A literature review is conducted with the aim to shed light on the possibilities of this hybrid light-duty commercial van for metropolitan delivery tasks providing insights into the key factors and issues for sizing the powertrain components and fuel management strategies to meet metropolitan freight fleet needs.
Comparison of Conventional vs. Modular Hydrogen Refuelling Stations and On-Site Production vs. Delivery
Mar 2017
Publication
To meet the needs of public and private stakeholders involved in the development construction and operation of hydrogen fuelling stations needed to support the widespread roll-out of hydrogen fuel cell electric vehicles this work presents publicly available station templates and analyses. These ‘Reference Stations’ help reduce the cost and speed the deployment of hydrogen stations by providing a common baseline with which to start a design enable quick assessment of potential sites for a hydrogen station identify contributors to poor economics and suggest areas of research. This work presents layouts bills of materials piping and instrumentation diagrams and detailed analyses of five new station designs. In the near term delivered hydrogen results in a lower cost of hydrogen compared to on-site production via steam methane reforming or electrolysis although the on-site production methods have other advantages. Modular station concepts including on-site production can reduce lot sizes from conventional assemble-on-site stations.
Sequential Combustion in Steam Methane Reformers for Hydrogen and Power Production With CCUS in Decarbonized Industrial Clusters
Aug 2020
Publication
In future energy supply systems hydrogen and electricity may be generated in decarbonized industrial clusters using a common infrastructure for natural gas supply electricity grid and transport and geological storage of CO2. The novel contribution of this article consists of using sequential combustion in a steam methane reforming (SMR) hydrogen plant to allow for capital and operating cost reduction by using a single post-combustion carbon capture system for both the hydrogen process and the combined cycle gas turbine (CCGT) power plant plus appropriate integration for this new equipment combination. The concept would be widely applied to any post-combustion CO2 capture process. A newly developed rigorous gPROMs model of two hydrogen production technologies covering a wide range of hydrogen production capacities thermodynamically integrated with commercially available gas turbine engines quantifies the step change in thermal efficiency and hydrogen production efficiency. It includes a generic post-combustion capture technology – a conventional 30%wt MEA process - to quantify the reduction in size of CO2 absorber columns the most capital intensive part of solvent-based capture systems. For a conventional SMR located downstream of an H-class gas turbine engine followed by a three-pressure level HRSG and a capture plant with two absorbers the integrated system produces ca. 696400 Nm3/h of H2 with a net power output of 651 MWe at a net thermal efficiency of 38.9%LHV. This corresponds to 34 MWe of additional power increasing efficiency by 4.9% points and makes one absorber redundant compared to the equivalent non-integrated system producing the same volume of H2. For a dedicated gas heated reformer (GHR) located downstream of an aeroderivative gas turbine engine followed by a two-pressure level HRSG and a capture plant with one absorber the integrated system produces ca. 80750 Nm3/h of H2 with a net power output of 73 MWe and a net thermal efficiency of 54.7%LHV. This corresponds to 13 MWe of additional power output increasing efficiency by 13.5% points and also makes one absorber redundant. The article also presents new insights for the design and operation of reformers integrated with gas turbines and with CO2 capture.
The World’s Energy Agenda & Its Evolution: Issues Monitor 2019
Feb 2019
Publication
In an era where the energy landscape is in constant transition energy leaders must pay attention to many different signals of change and distinguish key issues from the noise. The Issues Monitor identifies shifting patterns of connected issues which are shaping energy transitions.<br/>This report takes a focused look at the issues facing the energy transition in Europe using data collected by surveying over 40 leaders and shapers representing the European Transmission and Distributors Operators. This Issues Monitor outlines clear Action Priorities and Critical Uncertainties for different stakeholder groups mapping them out intuitively to promote a shared understanding of the issues. These maps also help identifiy regional variations understand differing areas of concern as well as follow the evolution of specific technology trends.<br/>Produced in partnership with ENTSO-E and E.DSO.
Hybrid Power-heat Microgrid Solution Using Hydrogen as an Energy Vector for Residential Houses in Spain. A Case Study
May 2022
Publication
In order to favor a transition to a renewable energy economy it is necessary to study the possible permeation of renewable energy sources not only in the electric grid or industrial scale but also in the small householding scale. One of the most interesting technologies available for this purpose is solar energy since it is a mature technology that can be easily installed in every rooftop. Thus a techno-economic assessment was carried out to evaluate the installation of a solar-based power-heat hybrid microgrid considering the use of hydrogen as an energy vector in a typical residential house in Spain. Lead-acid batteries plus the photovoltaic and solar thermal energy installation are complemented with a hydrogen system composed of an electrolyzer two metal hydride bottles and a fuel cell. A simulation tool has been generated using experimental models developed and validated with real equipment for each one of the electric microgrid component. Three operating modes were tested making use of this tool to better manage the energy consumed/produced and optimize the economic output of the facility. The results show that setting up a hydrogen-based microgrid in a residential house is unviable today mainly due to the high cost of hydrogen generation and consumption equipment. If only solar energy is considered the microgrid inversion (12.500 €) is recovered in ten years. On the other hand selling the electricity output has almost no repercussions considering current electrical rates in Spain. Finally while using an optimization algorithm to manage energy use battery life-spam and economic benefit slightly increase. However this profit may not be enough to justify the use of a more complex control system. The results of this research will help users renewable energy companies investigators and policymakers to better understand the different factors influencing the spread of renewable smart grids in households and propose solutions to address these.
Heat in Buildings Strategy: Achieving Net Zero Emissions in Scotland's Buildings
Oct 2021
Publication
Sets out our vision for the future of heat in buildings and the actions we are taking in the buildings sector to deliver our climate change commitments maximise economic opportunities and ensure a just transition including helping address fuel poverty.
The Future Role of Gas in Transport
Mar 2021
Publication
This is a Network Innovation Allowance funded project overseen by a steering group comprising the UK and Ireland gas network operators (Cadent Gas Networks Ireland National Grid Northern Gas Networks SGN Wales and West). The project follows on from previous studies that modelled the role of green gases in decarbonising the GB economy. The role of this study is to understand the transition from the GB economy today to a decarbonised economy in 2050 focusing on how the transition is achieved and the competing and complementary nature of different low and zero emission fuels and technologies over time.
While the project covers the whole economy it focuses on transport especially trucks as an early adopter of green gases and as a key enabler of the transition. The study and resulting report are aimed at the gas industry and government and tries to build a green gas decarbonisation narrative supported by a wide range of stakeholders in order clarify the path ahead and thereby focus future efforts on delivering decarbonisation through green gases as quickly as possible.
The objectives of the study are:
Green gases
This report discusses the future role of ‘green gases’ which are biomethane and hydrogen produced from low- and zero-carbon sources each produced via two main methods:
Biomethane from Anaerobic Digestion (AD): A mature technology for turning biological material into a non-fossil form of natural gas (methane). AD plants produce biogas which must then be upgraded to biomethane.
Biomethane from Bio-Substitute Natural Gas (Bio-SNG): This technology is at an earlier stage of development than AD but has the potential to unlock other feedstocks for biomethane production such as waste wood and residual household waste.
Blue Hydrogen: Hydrogen from reformation of natural gas which produces hydrogen and carbon monoxide. 90-95% of the carbon is captured and stored making this a low-carbon form of hydrogen.
Green Hydrogen: Water is split into hydrogen and oxygen via electrolysis using electricity generated by renewables. No carbon emissions are produced so this is zero-carbon hydrogen."
While the project covers the whole economy it focuses on transport especially trucks as an early adopter of green gases and as a key enabler of the transition. The study and resulting report are aimed at the gas industry and government and tries to build a green gas decarbonisation narrative supported by a wide range of stakeholders in order clarify the path ahead and thereby focus future efforts on delivering decarbonisation through green gases as quickly as possible.
The objectives of the study are:
- Analyse the complete supply chain production distribution and use of electricity biomethane bio-SNG and hydrogen to understand the role of each fuel and the timeline for scaling up of their use.
- Develop a narrative based on these findings to show how the use of these fuels scales up over time and how they compete and complement one another.
Green gases
This report discusses the future role of ‘green gases’ which are biomethane and hydrogen produced from low- and zero-carbon sources each produced via two main methods:
Biomethane from Anaerobic Digestion (AD): A mature technology for turning biological material into a non-fossil form of natural gas (methane). AD plants produce biogas which must then be upgraded to biomethane.
Biomethane from Bio-Substitute Natural Gas (Bio-SNG): This technology is at an earlier stage of development than AD but has the potential to unlock other feedstocks for biomethane production such as waste wood and residual household waste.
Blue Hydrogen: Hydrogen from reformation of natural gas which produces hydrogen and carbon monoxide. 90-95% of the carbon is captured and stored making this a low-carbon form of hydrogen.
Green Hydrogen: Water is split into hydrogen and oxygen via electrolysis using electricity generated by renewables. No carbon emissions are produced so this is zero-carbon hydrogen."
A Host-guest Approach to Fabricate Metallic Cobalt Nanoparticles Embedded in Silk-derived N-doped Carbon Fibers for Efficient Hydrogen Evolution
Feb 2017
Publication
Hydrogen evolution reaction (HER) plays a key role in generating clean and renewable energy. As the most effective HER electrocatalysts Pt group catalysts suffer from severe problems such as high price and scarcity. It is highly desirable to design and synthesize sustainable HER electrocatalysts to replace the Pt group catalysts. Due to their low cost high abundance and high activities cobalt-incorporated N-doped nanocarbon hybrids are promising candidate electrocatalysts for HER. In this report we demonstrated a robust and eco-friendly host-guest approach to fabricate metallic cobalt nanoparticles embedded in N-doped carbon fibers derived from natural silk fibers. Benefiting from the one-dimensional nanostructure the well-dispersed metallic cobalt nanoparticles and the N-doped thin graphitized carbon layer coating the best Co-based electrocatalyst manifests low overpotential (61 mV@10 mA/cm2) HER activity that is comparable with commercial 20% Pt/C and good stability in acid. Our findings provide a novel and unique route to explore high-performance noble-metal-free HER electrocatalysts.
Expected Impacts on Greenhouse Gas and Air Pollutant Emissions Due to a Possible Transition Towards a Hydrogen Economy in German Road Transport
Nov 2020
Publication
Transitioning German road transport partially to hydrogen energy is among the possibilities being discussed to help meet national climate targets. This study investigates impacts of a hypothetical complete transition from conventionally-fuelled to hydrogen-powered German transport through representative scenarios. Our results show that German emissions change between −179 and +95 MtCO2eq annually depending on the scenario with renewable-powered electrolysis leading to the greatest emissions reduction while electrolysis using the fossil-intense current electricity mix leads to the greatest increase. German energy emissions of regulated pollutants decrease significantly indicating the potential for simultaneous air quality improvements. Vehicular hydrogen demand is 1000 PJ annually requiring 446–525 TWh for electrolysis hydrogen transport and storage which could be supplied by future German renewable generation supporting the potential for CO2-free hydrogen traffic and increased energy security. Thus hydrogen-powered transport could contribute significantly to climate and air quality goals warranting further research and political discussion about this possibility.
Methanol as a Carrier of Hydrogen and Carbon in Fossil-free Production of Direct Reduced Iron
Jul 2020
Publication
Steelmaking is responsible for around 7% of the global emissions of carbon dioxide and new steelmaking processes are necessary to reach international climate targets. As a response to this steelmaking processes based on the direct reduction of iron ore by hydrogen produced via water electrolysis powered by renewable electricity have been suggested. Here we present a novel variant of hydrogen-based steelmaking incorporating methanol as a hydrogen and carbon carrier together with high-temperature co-electrolysis of water and carbon dioxide and biomass oxy-fuel combustion. The energy and mass balances of the process are analyzed. It is found that this methanol-based direct reduction process may potentially offer a number of process-related advantages over a process based on pure hydrogen featuring several process integration options. Notably the electricity and total energy use of the steelmaking process could be reduced by up to 25% and 8% compared to a reference pure hydrogen process respectively. The amount of high-temperature (> 200 °C) heat that must be supplied to the process could also be reduced by up to approximately 34% although the demand for medium-temperature heat is substantially increased. Furthermore the suggested process could allow for the production of high-quality direct reduced iron with appropriate carburization to alleviate downstream processing in an electric arc furnace which is not the case for a process based on pure hydrogen.
Market Segmentation of Domestic and Commercial Natural Gas Appliances
Jan 2021
Publication
The main goal of the project is to enable the wide adoption of H2NG (hydrogen in natural gas) blends by closing knowledge gaps regarding technical impacts on residential and commercial gas appliances. The project consortium will identify and recommend appropriate codes and standards that should be adapted to answer the needs and develop a strategy for addressing the challenges for new and existing appliances.<br/>This deliverable on market segmentation is part of work package 2 and provides a quantitative segmentation of the gas appliance market in terms of appliance population numbers. It therefore prepares the project partners to perform the subsequent selection of the most representative product types to be tested in the laboratories of the THyGA partners.<br/>The classification is developed to categorise appliances installed in the field based on available statistics calculation methods and estimations. As a result appliance populations are provided for each technology segment that draw a representative picture of the installed end-use appliances within the European Union in 2020.
Hydrogen Scooter Testing and Verification Program
Nov 2012
Publication
Taiwan stands out globally in the manufacture of scooters. If fuel cell technology could be applied to the scooter Taiwan could gain an advantage in the trend for commercial applications for fct. In 2011 The Bureau of Standards Metrology and Inspection proposed this project “the Demonstration of Hydrogen Fuel Cell Scooters.” Thirty rental fuel cell scooters are to run a long distance. Evaluation during everyday use of the cells performance will be made and reported by the riders. All the evaluations will be put into consideration of future adjustments. The project is to map out a practice route in Taipei and set up a control center to follow progress. The data gathered from the practice project will help examine the performance of fuel cell scooters contributing to the creation of legal drafts and future standards. The Taiwan fuel cell industry chain is complete and the industry possesses the ability to produce key components. Thus it is a potential market in Taiwan. A review of fuel cell development conditions in Taiwan shows that the fuel cell scooters is a niche industry owing to the strength of this technology.
Amorphous Iron-nickel Phosphide Nanocone Arrays as Efficient Bifunctional Electrodes for Overall Water Splitting
May 2020
Publication
The synthesis of low-cost and highly active electrodes for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is very important for water splitting. In this work the novel amorphous iron-nickel phosphide (FeP-Ni) nanocone arrays as efficient bifunctional electrodes for overall water splitting have been in-situ assembled on conductive three-dimensional (3D) Ni foam via a facile and mild liquid deposition process. It is found that the FeP-Ni electrode demonstrates highly efficient electrocatalytic performance toward overall water splitting. In 1 M KOH electrolyte the optimal FeP-Ni electrode drives a current density of 10 mA/cm2 at an overpotential of 218 mV for the OER and 120 mV for the HER and can attain such current density for 25 h without performance regression. Moreover a two-electrode electrolyzer comprising the FeP-Ni electrodes can afford 10 mA/cm2 electrolysis current at a low cell voltage of 1.62 V and maintain long-term stability as well as superior to that of the coupled RuO2/NF‖Pt/C/NF cell. Detailed characterizations confirm that the excellent electrocatalytic performances for water splitting are attributed to the unique 3D morphology of nanocone arrays which could expose more surface active sites facilitate electrolyte diffusion benefit charge transfer and also favourable bubble detachment behaviour. Our work presents a facile and cost-effective pathway to design and develop active self-supported electrodes with novel 3D morphology for water electrolysis.
Optimized EMS and a Comparative Study of Hybrid Hydrogen Fuel Cell/Battery Vehicles
Jan 2022
Publication
This paper presents a new Fuel Cell Fuel Consumption Minimization Strategy (FCFCMS) for Hybrid Electric Vehicles (HEVs) powered by a fuel cell and an energy storage system in order to minimize as much as possible the consumption of hydrogen while maintaining the State Of Charge (SOC) of the battery. Compared to existing Energy Management Strategies (EMSs) (such as the well-known State Machine Strategy (SMC) Fuzzy Logic Control (FLC) Frequency Decoupling and FLC (FDFLC) and the Equivalent Consumption Minimization Strategy (ECMS)) the proposed strategy increases the overall vehicle energy efficiency and therefore minimizes the total hydrogen consumption while respecting the constraints of each energy and power element. A model of a hybrid vehicle has been built using the TruckMaker/MATLAB software. Using the Urban Dynamometer Driving Schedule (UDDS) which includes several stops and accelerations the performance of the proposed strategy has been compared with these different approaches (SMC FLC FDFLC and ECMS) through several simulations.
The Renewable Energy Transition in Africa: Powering Access, Resilience and Prosperity
Mar 2021
Publication
A renewables-based energy transition promises to deliver vast socio-economic benefits to countries across Africa improving energy access creating jobs and boosting energy security. To realise these benefits African countries have an opportunity to leapfrog fossil fuel technologies to a more sustainable climate-friendly power strategy aligned with the Paris Agreement and low-carbon growth.<br/><br/>The Renewable Energy Transition in Africa jointly prepared by Germany's KfW Development Bank Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) and the International Renewable Energy Agency (IRENA) on behalf of the German Federal Ministry for Economic Cooperation and Development (BMZ) explores how African countries can achieve universal energy access within the 2030 Agenda timeframe and identifies four areas of action:<br/><br/>Promote access to energy;<br/>De-risk and promoting private sector investments;<br/>Strengthen and modernise the grid;<br/>Support systemic innovation.<br/>The study also explores the transformational potential of the electricity sector in five Africa countries: Ghana Ivory Coast Morocco Rwanda and South Africa. Specifically developed by IRENA country case studies show the real-life applicability of power sector transformation and demonstrates how countries can:<br/><br/>Take advantage of the abundancy and competitiveness of renewables;<br/>Align ambitious renewable targets in energy and climate plans;<br/>Continue supporting the development of regional markets;<br/>Leverage renewables and distributed energy resources to achieve universal energy access;<br/>Develop tailored power sector transformation plans based on a systemic innovation approach;<br/>Build on policy frameworks for just and inclusive transitions.
Using the Jet Stream for Sustainable Airship and Balloon Transportation of Cargo and Hydrogen
Jul 2019
Publication
The maritime shipping sector is a major contributor to CO2 emissions and this figure is expected to rise in coming decades. With the intent of reducing emissions from this sector this research proposes the utilization of the jet stream to transport a combination of cargo and hydrogen using airships or balloons at altitudes of 10–20 km. The jet streams flow in the mid-latitudes predominantly in a west–east direction reaching an average wind speed of 165 km/h. Using this combination of high wind speeds and reliable direction hydrogen-filled airships or balloons could carry hydrogen with a lower fuel requirement and shorter travel time compared to conventional shipping. Jet streams at different altitudes in the atmosphere were used to identify the most appropriate circular routes for global airship travel. Round-the-world trips would take 16 days in the Northern Hemisphere and 14 in the Southern Hemisphere. Hydrogen transport via the jet stream due to its lower energy consumption and shorter cargo delivery time access to cities far from the coast could be a competitive alternative to maritime shipping and liquefied hydrogen tankers in the development of a sustainable future hydrogen economy.
Techno-economic calculations of small-scale hydrogen supply systems for zero emission transport in Norway
Jun 2019
Publication
In Norway where nearly 100% of the power is hydroelectric it is natural to consider water electrolysis as the main production method of hydrogen for zero-emission transport. In a start-up market with low demand for hydrogen one may find that small-scale WE-based hydrogen production is more cost-efficient than large-scale production because of the potential to reach a high number of operating hours at rated capacity and high overall system utilization rate. Two case studies addressing the levelized costs of hydrogen in local supply systems have been evaluated in the present work: (1) Hydrogen production at a small-scale hydroelectric power plant (with and without on-site refuelling) and (2) Small hydrogen refuelling station for trucks (with and without on-site hydrogen production). The techno-economic calculations of the two case studies show that the levelized hydrogen refuelling cost at the small-scale hydroelectric power plant (with a local station) will be 141 NOK/kg while a fleet of 5 fuel cell trucks will be able to refuel hydrogen at a cost of 58 NOK/kg at a station with on-site production or 71 NOK/kg at a station based on delivered hydrogen. The study shows that there is a relatively good business case for local water electrolysis and supply of hydrogen to captive fleets of trucks in Norway particularly if the size of the fleet is sufficiently large to justify the installation of a relatively large water electrolyzer system (economies of scale). The ideal concept would be a large fleet of heavy-duty vehicles (with a high total hydrogen demand) and a refuelling station with nearly 100% utilization of the installed hydrogen production capacity.
Value Added of the Hydrogen and Fuel Cell Sector in Europe
Mar 2019
Publication
Fuel cells and hydrogen (FCH) could bring significant environmental benefits across the energy system if deployed widely: low carbon and highly efficient energy conversions with zero air quality emissions. The socio-economic benefits to Europe could also be substantial through employment in development manufacturing installation and service sectors and through technology export. Major corporations are stressing the economic and environmental value of FCH technologies and the importance of including them in both transport and stationary energy systems globally while national governments and independent agencies are supporting their role in the energy systems transition.
Recognising the potential economic and industrial benefits from a strong FCH supply chain in Europe and the opportunities for initiatives to support new energy supply chains the FCH 2 JU commissioned a study to evaluate for the first time the value added that the fuel cell and hydrogen sector can bring to Europe by 2030.
The outputs of the study are divided into three reports:
The Value Chain study complements the Hydrogen Roadmap for Europe recently published by the FCH 2 JU. This lays out a pathway for the large-scale deployment of hydrogen and fuel cells to 2050 in order to achieve a 2-degree climate scenario. This study also quantified socio-economic and environmental benefits but with important differences in scope between the two studies. The Hydrogen Roadmap for Europe looked at the wider picture quantifying the scale of FCH roll-out needed to meet the 2-degree scenario objectives. It assessed the socio-economic impacts of a sector of that scale looking top-down at the entire FCH value chain. The Value Chain study presented here is a narrower and more detailed bottom-up assessment of the value-added in manufacturing activities and the immediate ecosystem of suppliers that this is likely to create.
Recognising the potential economic and industrial benefits from a strong FCH supply chain in Europe and the opportunities for initiatives to support new energy supply chains the FCH 2 JU commissioned a study to evaluate for the first time the value added that the fuel cell and hydrogen sector can bring to Europe by 2030.
The outputs of the study are divided into three reports:
- A ‘Summary’ report that provides a synthetic overview of the study conclusions;
- a ‘Findings’ report that presents the approach and findings of the study;
- and an ‘Evidence’ report that provides the detailed background information and analysis that supports the findings and recommendations.
The Value Chain study complements the Hydrogen Roadmap for Europe recently published by the FCH 2 JU. This lays out a pathway for the large-scale deployment of hydrogen and fuel cells to 2050 in order to achieve a 2-degree climate scenario. This study also quantified socio-economic and environmental benefits but with important differences in scope between the two studies. The Hydrogen Roadmap for Europe looked at the wider picture quantifying the scale of FCH roll-out needed to meet the 2-degree scenario objectives. It assessed the socio-economic impacts of a sector of that scale looking top-down at the entire FCH value chain. The Value Chain study presented here is a narrower and more detailed bottom-up assessment of the value-added in manufacturing activities and the immediate ecosystem of suppliers that this is likely to create.
The Influence of Hydrogen Desorption on Micromechanical Properties and Tribological Behavior of Iron and Carbon Steels
Dec 2018
Publication
The influence of the previous electrolytic hydrogenation on the micromechanical properties and tribological behavior of the surface layers of iron and carbon steels has been studied. The concentrations of diffusion-moving and residual hydrogen in steels are determined depending on the carbon content. It is shown that the amount of sorbed hydrogen is determined by the density of dislocations and the relative volume of cementite. After desorption of diffusion-moving hydrogen the microhardness increases and materials plasticity decreases. The change of these characteristics decreases with the increase of carbon content in the steels. Internal stresses increase and redistribute under hydrogen desorption. Fragmentation of ferrite and perlite occurs as a result of electrolytic hydrogenation. Ferrite is characterized by the structure fragmentation and change of the crystallographic orientation of planes. The perlite structure shows the crushing of cementite plates and their destruction. The influence of hydrogen desorption on the microhardness of structural components of ferrite-perlite steels is shown. Large scattering of microhardness is found in perlite due to different diffusion rates of hydrogen because of the unequally oriented cementite plates. It was found that the tendency of materials to blister formation is reduced with the increase of carbon content. The influence of hydrogen on the tribological behaviour of steels under dry and boundary friction has been studied. It is shown that hydrogen desorption intensifies the materials wear. After hydrogen desorption tribological behaviour is determined by the adhesion interaction between the contacting pairs.
No more items...