Publications

The climate emergency is one of the biggest challenges humanity must face in the 21st century. The global energy transition faces many challenges when it comes to ensuring a sustainable reliable and affordable energy supply. A likely outcome is decarbonizing the existing gas infrastructure. This will inevitably lead to greater penetration of hydrogen. While the introduction of hydrogen into natural gas  transmission and distribution networks creates challenges there is nothing new or inherently impossible about the concept. Indeed more than 4000 kilometers of hydrogen pipelines are currently in operation. These pipelines however were (almost) all built and operated exclusively in accordance with specific hydrogen codes which tend to be much more restrictive than their natural gas equivalents. This means that the conversion of natural gas pipelines which have often been in service for decades and have accumulated damage and been subject to cracking threats (e.g. fatigue or stress corrosion cracking (SCC)) throughout their lifetime can be challenging. This paper will investigate the impact of transporting hydrogen on the crack management of existing natural gas pipelines from an overall integrity perspective. Different cracking threats will be described including recent industry experience of those which are generic to all steel pipelines but exacerbated by hydrogen and those which are hydrogen specific. The application of a Hydrogen Framework to identify characterise and manage credible cracking threats to pipelines in order to help enable the safe economic and successful introduction of hydrogen into the natural gas network will be discussed.

The hydrogen storage tank is a key parameter of the hydrogen storage system in hydrogen fuel cell vehicles (HFCVs) as its safety determines the commercialization of HFCVs. Compared with other types the type IV hydrogen storage tank which consists of a polymer liner has the advantages of low cost lightweight and low storage energy consumption but meanwhile higher hydrogen permeability. A detailed review of the existing research on hydrogen permeability of the liner material of type IV hydrogen storage tanks can improve the understanding of the hydrogen permeation mechanism and provide references for following-up researchers and research on the safety of HFCVs. The process of hydrogen permeation and test methods are firstly discussed in detail. This paper then analyzes the factors that affect the process of hydrogen permeation and the barrier mechanism of the liner material and summarizes the prediction models of gas permeation. In addition to the above analysis and comments future research on the permeability of the liner material of the type IV hydrogen storage tank is prospected.

Steam methane reforming with CO2 capture (blue hydrogen) and water electrolysis based on renewable electricity (green hydrogen) are commonly assumed to be the main supply options in a future hydrogen economy. However another promising method is emerging in the form of natural gas pyrolysis (turquoise hydrogen) with pure carbon as a valuable by-product. To better understand the potential of turquoise hydrogen this study presents a techno-economic assessment of a molten salt pyrolysis process. Results show that moderate reactor pressures around 12 bar are optimal and that reactor size must be limited by accepting reactor performance well below the thermodynamic equilibrium. Despite this challenge stemming from slow reaction rates the simplicity of the molten salt pyrolysis process delivers high efficiencies and promising economics. In the long-term carbon could be produced for 200–300 €/ton granting access to high-volume markets in the metallurgical and chemical process industries. Such a scenario makes turquoise hydrogen a promising alternative to blue hydrogen in regions with public resistance to CO2 transport and storage. In the medium-term expensive first-of-a-kind plants could produce carbon around 400 €/ton if hydrogen prices are set by conventional blue hydrogen production. Pure carbon at this cost level can access smaller high-value markets such as carbon anodes and graphite ensuring profitable operation even for first movers. In conclusion the economic potential of molten salt pyrolysis is high and further demonstration and scale-up efforts are strongly recommended.

Green Print -  Future Heat for Everyone draws together technical consumer and economic considerations to create a pioneering plan to transition 22 million UK homes to low carbon heat by 2050.<br/>Our Green Print underlines the scale of the challenge ahead acknowledging that a mosaic of low carbon heating solutions will be required to meet the needs of individual communities and setting out 12 key steps that can be taken now in order to get us there<br/>The Climate Change Committee (CCC) estimates an investment spend of £250bn to upgrade insulation and heating in homes as well as provide the infrastructure to deliver the energy.<br/>This is a task of unprecedented scale the equivalent of retro-fitting 67000 homes every month from now until 2050. In this Report Cadent takes the industry lead in addressing the challenge.

At the present stage of electric power industry development special attention is being paid to the development and research of new efficient energy sources. The use of hydrogen fuel cells is promising for remote autonomous power supply systems. The authors of the paper have developed the structure and determined the optimal composition of a hybrid generation system based on hydrogen fuel cells and battery storage and have conducted studies of its operating modes and for remote consumers’ power supply efficiency. A simulation of the electromagnetic processes was carried out to check the operability of the proposed hybrid generation system structure. The simulation results confirmed the operability of the structure under consideration the calculation of its parameters reliability and the high quality of the output voltage. The electricity cost of a hybrid generation system was estimated according to the LCOE (levelized cost of energy) indicator its value being 1.17 USD/kWh. The factors influencing the electricity cost of a hydrogen generation system have been determined and ways for reducing its cost identified.

A general rise in environmental and anthropogenically induced greenhouse gas emissions has resulted from worldwide population growth and a growing appetite for clean energy industrial outputs and consumer utilization. Furthermore well-established advanced and emerging countries are seeking fossil fuel and petroleum resources to support their aviation electric utilities industrial sectors and consumer processing essentials. There is an increasing tendency to overcome these challenging concerns and achieve the Paris Agreement’s priorities as emerging technological advances in clean energy technologies progress. Hydrogen is expected to be implemented in various production applications as a fundamental fuel in future energy carrier materials development and manufacturing processes. This paper summarizes recent developments and hydrogen technologies in fuel refining hydrocarbon processing materials manufacturing pharmaceuticals aircraft construction electronics and other hydrogen applications. It also highlights the existing industrialization scenario and describes prospective innovations including theoretical scientific advancements green raw materials production potential exploration and renewable resource integration. Moreover this article further discusses some socioeconomic implications of hydrogen as a green resource.

There is an increasing body of evidence that leakage of hydrogen to the atmosphere will have an indirect warming effect on the climate and so should be minimised.<br/>This study investigates and quantifies the current understanding of potential hydrogen emissions in the different sectors across a future hydrogen value-chain. It shows that there are some key areas in production distribution and end-use where there could potentially be significant leaks of hydrogen to the atmosphere. In some of these areas there are clear mitigation options while with others the options are less clear due to uncertainty in either data or future technology development.<br/>The report recommends further research and development to reduce the main leak pathways and additional evidence gathering in key areas where there is currently inadequate data to make accurate predictions.<br/>The study was commissioned by BEIS and conducted by the Frazer-Nash consultancy.

The aim of this study was to evaluate the motorization market of electric vehicles powered by hydrogen cells in Poland. European conditions of such technology were indicated as well as original proposals on amendments to the law to increase the development pace of electromobility based on hydrogen cells. There were also presented economic aspects of this economic phenomenon. Moreover survey research was conducted to examine the preferences of hydrogen and electric vehicle users in 5 primary Polish cities. In this way the level of social acceptance for the technological revolution based on hydrogen cells and taking place in the motorization sector was determined.

The anticipated upscaling of hydrogen energy applications will involve the storage and transport of hydrogen at cryogenic conditions. Understanding the potential hazard arising from leaks in high-pressure cryogenic storage is needed to improve hydrogen safety. The manuscript reports a series of numerical simulations with detailed chemistry for the transient evolution of ignited high-pressure cryogenic hydrogen jets. The study aims to gain insight of the ignition processes flame structures and dynamics associated with the transient flame evolution. Numerical simulations were firstly conducted for an unignited jet released under the same cryogenic temperature of 80 K and pressure of 200 bar as the considered ignited jets. The predicted hydrogen concentrations were found to be in good agreement with the experimental measurements. The results informed the subsequent simulations of the ignited jets involving four different ignition locations. The predicted time series snapshots of temperature hydrogen mass fraction and the flame index are analyzed to study the transient evolution and structure of the flame. The results show that a diffusion combustion layer is developed along the outer boundary of the jet and a side diffusion flame is formed for the near-field ignition. For the far-field ignition an envelope flame is observed. The flame structure contains a diffusion flame on the outer edge and a premixed flame inside the jet. Due to the complex interactions between turbulence fuel-air mixing at cryogenic temperature and chemical reactions localized spontaneous ignition and transient flame extinguishment are observed. The predictions also captured the experimentally observed deflagration waves in the far-field ignited jets.

Climate change primarily caused by the greenhouse gases emitted as a result of the consumption of carbon-based fossil fuels is considered one of the biggest challenges that humanity has ever faced. Moreover the Ukrainian crisis in 2022 has complicated the global energy and food status quo more than ever. The permanency of this multifaceted fragility implies the need for increased efforts to have energy independence and requires long-term solutions without fossil fuels through the use of clean zero-carbon renewables energies. Hydrogen technologies have a strong potential to emerge as an energy eco-system in its production-storage-distribution-utilization stages with its synergistic integration with solar-wind-hydraulic-nuclear and other zero-carbon clean renewable energy resources and with the existing energy infrastructure. In this paper we provide a global review of hydrogen energy need related policies practices and state of the art for hydrogen production transportation storage and utilization.

Hydrogen has become the most promising energy carrier for the future. The spotlight is now on green hydrogen produced with water electrolysis powered exclusively by renewable energy sources. However several other technologies and sources are available or under development to satisfy the current and future hydrogen demand. In fact hydrogen production involves different resources and energy loads depending on the production method used. Therefore the industry has tried to set a classification code for this energy carrier. This is done by using colors that reflect the hydrogen production method the resources consumed to produce the required energy and the number of emissions generated during the process. Depending on the reviewed literature some colors have slightly different definitions thus making the classifications imprecise. Therefore this techno-economic analysis clarifies the meaning of each hydrogen color by systematically reviewing their production methods consumed energy sources and generated emissions. Then an economic assessment compares the costs of the various hydrogen colors and examines the most feasible ones and their potential evolution. The scientific community and industry’s clear understanding of the advantages and drawbacks of each element of the hydrogen color spectrum is an essential step toward reaching a sustainable hydrogen economy

The main objective of this paper is to develop a dynamic emulator of a proton exchange membrane (PEM) electrolyzer (EL) through an equivalent electrical model. Experimental investigations have highlighted the capacitive effect of EL when subjecting to dynamic current profiles which so far has not been reported in the literature. Thanks to a thorough experimental study the electrical domain of a PEM EL composed of 3 cells has been modeled under dynamic operating conditions. The dynamic emulator is based on an equivalent electrical scheme that takes into consideration the dynamic behavior of the EL in cases of sudden variation in the supply current. The model parameters were identified for a suitable current interval to consider them as constant and then tested with experimental data. The obtained results through the developed dynamic emulator have demonstrated its ability to accurately replicate the dynamic behavior of a PEM EL.

This paper describes the development of a general-purpose geospatial model for assessing the economic viability of hydrogen production from offshore wind power. A key feature of the model is that it uses the offshore project's location characteristics (distance to port water depth distance to gas grid injection point). Learning rates are used to predict the cost of the wind farm's components and electrolyser stack replacement. The notional wind farm used in the paper has a capacity of 510 MW. The model is implemented in a geographic information system which is used to create maps of levelised cost of hydrogen from offshore wind in Irish waters. LCOH values in 2030 spatially vary by over 50% depending on location. The geographically distributed LCOH results are summarised in a multivariate production function which is a simple and rapid tool for generating preliminary LCOH estimates based on simple site input variables.

A significant contribution to the reduction of carbon emissions will be enabled through the transition from a centralised fossil fuel system to a decentralised renewable electricity system. However due to the intermittent nature of renewable energy storage is required to provide a suitable response to dynamic loads and manage the excess generated electricity with utilisation during periods of low generation. This paper investigates the use of stationary hydrogen-based energy storage systems for microgrids and distributed energy resource systems. An exploratory study was conducted in Australia based on a mixed methodology. Ten Australian industry experts were interviewed to determine use cases for hydrogen-based energy storage systems’ requirements barriers methods and recommendations. This study suggests that the current cost of the electrolyser fuel cell and storage medium and the current low round-trip efficiency are the main elements inhibiting hydrogen-based energy storage systems. Limited industry and practical experience are barriers to the implementation of hydrogen storage systems. Government support could help scale hydrogen-based energy storage systems among early adopters and enablers. Furthermore collaboration and knowledge sharing could reduce risks allowing the involvement of more stakeholders. Competition and innovation could ultimately reduce the costs increasing the uptake of hydrogen storage systems.

To provide an effective energy transition hydrogen is required to decarbonize the hard-toabate industries. As a case study this paper provides a holistic view of the hydrogen energy transition in the United Arab Emirates (UAE). By utilizing the directional distance function undesirable data envelopment analysis model the energy economic and environmental efficiency of UAE sectors are estimated from 2001 to 2020 to prioritize hydrogen sector coupling. Green hydrogen production efficiency is analyzed from 2020 to 2050. The UAE should prioritize the industry and transportation sectors with average efficiency scores of 0.7 and 0.74. The decomposition of efficiency into pure technical efficiency and scale efficiency suggests policies and strategies should target upscaling the UAE’s low-carbon hydrogen production capacity to expedite short-term and overall production efficiency. The findings of this study can guide strategies and policies for the UAE’s low-carbon hydrogen transition. A framework is developed based on the findings of the study.

"Green hydrogen” i.e. hydrogen produced by splitting water with a carbon “free” source of electricity via electrolysis is set to become the energy vector enabling a deep decarbonisation of society and a virtuous water based energy cycle. If to date water electrolysis is considered to be a scalable technology the source of water to enable a “green hydrogen” economy at scale is questionable. Countries with the highest renewable energy potential like Australia are also among the driest places on earth. Globally 380000 GL/year of wastewater is available and this is much more than the 34500 GL/year of water required to produce the projected 2.3 Gt of hydrogen of a mature hydrogen economy. Hence the need to assess both technically and economically whether some wastewater treatment effluent are a better source for green hydrogen. Analysis of Sydney Water’s wastewater treatment plants alone shows that these plants have 37.6 ML/day of unused tertiary effluents which if electrolysed would generate 420000 t H2/day or 0.88 Mt H2/year and cover ∼100% of Australia’s estimated production by 2030. Furthermore the production of oxygen as a by-product of the electrolysis process could lead to significant benefits to the water industry not only in reducing the cost of the hydrogen produced for $3/kg (assuming a price of oxygen of $3–4 per kg) but also in improving the environmental footprint of wastewater treatment plants by enabling the onsite re-use of oxygen for the treatment of the wastewater. Compared to desalinated water that requires large investments or stormwater that is unpredictable it is apparent that the water utilities have a critical role to play in managing water assets that are “climate independent” as the next “golden oil” opportunity and in enabling a “responsible” hydrogen industry that sensibly manages its water demands and does not compete with existing water potable water demand.

This article was aimed to answer the question of whether local energy communities have a sufficient energy surplus for storage purposes including hydrogen production. The article presents an innovative approach to current research and a discussion of the concepts of the collective prosumer and virtual prosumer that have been implemented in the legal order and further amended in the law. From this perspective it was of utmost importance to analyze the model of functioning of an energy cluster consisting of energy consumers energy producers and hydrogen storage whose goal is to maximize the obtained benefits assuming the co-operative nature of the relationship. The announced and clear perspective of the planned benefits will provide the cluster members a measurable basis for participation in such an energy community. However the catalogue of benefits will be conditioned by the fulfillment of several requirements related to both the scale of covering energy demand from own sources and the need to store surplus energy. As part of the article the results of analyses together with a functional model based on real data of the local energy community are presented.

This is the tenth annual Progress Report to the Scottish Parliament as required by the Climate Change (Scotland) Act 2009. This year’s report shows that in 2019 Scotland’s greenhouse emissions fell by 2% compared to 2018 and are now 44% below 1990 levels. The reductions were largely driven by the manufacturing and construction and fuel supply sectors with electricity generation remaining the biggest driver of emissions cuts over the past decade (2009-2019). The potential for further emissions savings from electricity generation has however largely run out.

The focus must now shift to ensuring that rapid emissions reductions are delivered with no further delay to allow Scotland to meet its legislated 2030 target.

This report and other reports by the Climate Change Committee can be downloaded on their website.

Over the past two years requirements to meet climate targets have been intensified. In addition to the tightening of the climate targets and the demand for net-zero achievement by as early as 2045 there have been discussions on implementing and realizing these goals. Hydrogen has emerged as a promising climate-neutral energy carrier. Thus over the last 1.5 years more than 25 countries have published hydrogen roadmaps. Furthermore various studies by different authorities have been released to support the development of a hydrogen economy. This paper examines published studies and hydrogen country roadmaps as part of a meta-analysis. Furthermore a market analysis of electrolyzer manufacturers is conducted. The prospected demand for green hydrogen from various studies is compared to electrolyzer manufacturing capacities and selected green hydrogen projects to identify potential market ramp-up scenarios and to evaluate if green hydrogen demand forecasts can be filled.

Transporting green hydrogen by existing natural gas networks has become a practical means to accommodate curtailed wind and solar power. Restricted by pipe materials and pressure levels there is an upper limit on the hydrogen blending ratio of hydrogen-enriched compressed natural gas (HCNG) that can be transported by natural gas pipelines which affects whether the natural gas network can supply energy safely and reliably. To this end this paper investigates the effects of the intermittent and fluctuating green hydrogen produced by different types of renewable energy on the dynamic distribution of hydrogen concentration after it is blended into natural gas pipelines. Based on the isothermal steady-state simulation results of the natural gas network two convection–diffusion models for the dynamic simulation of hydrogen injections are proposed. Finally the dynamic changes of hydrogen concentration in the pipelines under scenarios of multiple green hydrogen types and multiple injection nodes are simulated on a seven-node natural gas network. The simulation results indicate that compared with the solar-power-dominated hydrogen productionblending scenario the hydrogen concentrations in the natural gas pipelines are more uniformly distributed in the wind-power-dominated scenario and the solar–wind power balance scenario. To be specific in the solar-power-dominated scenario the hydrogen concentration exceeds the limit for more time whilst the overall hydrogen production is low and the local hydrogen concentration in the natural gas network exceeds the limit for nearly 50% of the time in a day. By comparison in the wind-power-dominated scenario all pipelines can work under safe conditions. The hydrogen concentration overrun time in the solar–wind power balance scenario is also improved compared with the solar-power-dominated scenario and the limit-exceeding time of the hydrogen concentration in Pipe 5 and Pipe 6 is reduced to 91.24% and 91.99% of the solar-power-dominated scenario. This work can help verify the day-ahead scheduling strategy of the electricity-HCNG integrated energy system (IES) and provide a reference for the design of local hydrogen production-blending systems.

This review examines the central role of hydrogen particularly green hydrogen from renewable sources in the global search for energy solutions that are sustainable and safe by design. Using the hydrogen square safety measures across the hydrogen value chain—production storage transport and utilisation—are discussed thereby highlighting the need for a balanced approach to ensure a sustainable and efficient hydrogen economy. The review also underlines the challenges in safety assessments points to past incidents and argues for a comprehensive risk assessment that uses empirical modelling simulation-based computational fluid dynamics (CFDs) for hydrogen dispersion and quantitative risk assessments. It also highlights the activities carried out by our research group SaRAH (Safety Risk Analysis and Hydrogen) relative to a more rigorous risk assessment of hydrogenrelated systems through the use of a combined approach of CFD simulations and the appropriate risk assessment tools. Our research activities are currently focused on underground hydrogen storage and hydrogen transport as hythane.

Hypothesis.<br/>The large-scale implementation of hydrogen economy requires immense storage spaces to facilitate the periodic storage/production cycles. Extensive modelling of hydrogen transport in porous media is required to comprehend the hydrogen-induced complexities prior to storage to avoid energy loss. Wettability of hydrogen-brine-rock systems influence flow properties (e.g. capillary pressure and relative permeability curves) and the residual saturations which are all essential for subsurface hydrogen systems.<br/>Model.<br/>This study aims to understand which parameters critically control the contact angle for hydrogen-brine-rock systems using the surface force analysis following the DLVO theory and sensitivity analysis. Furthermore the effect of roughness is studied using the Cassie-Baxter model.<br/>Findings.<br/>Our results reveal no considerable difference between H2 and other gases such as N2. Besides the inclusion of roughness highly affects the observed apparent contact angles and even lead to water-repelling features. It was observed that contact angle does not vary significantly with variations of surface charge and density at high salinity which is representative for reservoir conditions. Based on the analysis it is speculated that the influence of roughness on contact angle becomes significant at low water saturation (i.e. high capillary pressure).

In order to achieve carbon neutrality in a few decades the clean energy proportion in power mix of China will significantly rise to over 90%. A consensus has been reached recently that it will be of great significance to promote hydrogen energy that is produced by variable renewable energy power generation as a mainstay energy form in view of its potential value on achieving carbon neutrality. This is because hydrogen energy is capable of complementing the power system and realizing further electrification especially in the section that cannot be easily replaced by electric energy. Power system related planning model is commonly used for mid-term and long-term planning implemented through power installation and interconnection capacity expansion optimization. In consideration of the high importance of hydrogen and its close relationship with electricity an inclusive perspective which contains both kinds of the foresaid energy is required to deal with planning problems. In this study a joint model is established by coupling hydrogen energy model in the chronological operation power planning model to realize coordinated optimization on energy production transportation and storage. By taking the carbon neutrality scenario of China as an example the author applies this joint model to deploy a scheme research on power generation and hydrogen production inter-regional energy transportation capacity and hydrogen storage among various regions. Next by taking the technology progress and cost decrease prediction uncertainty into account the main technical– economic parameters are employed as variables to carry out sensitivity analysis research with a hope that the quantitative calculation and results discussion could provide suggestion and reference to energy-related companies policy-makers and institute researchers in formulating strategies on related energy development.

As a major part of the energy turn around the European Union and other countries are supporting the development of renewable energy technologies to decrease nuclear and fossil energy production. Therefore efficient use of renewable energy resources is one challenge as they are influenced by environmental conditions and hence the intensity of resources such as wind or solar power fluctuates. To secure constant energy supply suitable energy storage and conversion techniques are required. An upcoming solution is the utilization and storage of hydrogen or hydrogen-rich natural gas in porous formations in the underground. In the past microbial methanation was observed as a side effect during these gas storage operations. The concept of underground bio-methanation arised which uses the microbial metabolism to convert hydrogen and carbon dioxide into methane. The concept consists of injecting gaseous hydrogen and carbon dioxide into an underground structure during energy production peaks which are subsequently partly converted into methane. The resulting methane-rich gas mixture is withdrawn during high energy demand. The concept is comparable to engineered bio-reactors which are already locally integrated into the gas infrastructure. In both technologies the conversion process of hydrogen into methane is driven by hydrogenotrophic methanogenic archaea present in the aqueous phase of the natural underground or above-ground engineered reactor. Nevertheless the porous medium in the underground provides compared to the engineered bio-reactors a larger interface between the gas and aqueous phase caused by the enormous volume in the underground porous media. The following article summarizes the potential and concept of underground methanation and the current state of the art in terms of laboratory investigations and pilot tests. A short system potential analysis shows that an underground bio-reactor with a storage capacity of 850 Mio. Sm3 could deliver methane to more than 600000 households based on a hydrogen production from renewable energies.

This study has been commissioned by the gas transporters as part of the Gas Goes Green (GGG)2 work programme to develop and report a ‘gas transporter view’ on how to facilitate hydrogen blending from industrial clusters which are likely to form the initial source for hydrogen blending in the gas network. This view has been developed through engagement carried out with industrial clusters and other stakeholders as well as drawing on learnings from a previous hydrogen blending study.3 The key takeaways of this study are that: l Enabling hydrogen blending from industrial clusters can be done in a pragmatic way with limited need for change to existing gas frameworks. l Where frameworks do need to change the changes are incremental rather than involving overhaul of existing frameworks and are highly workable. l While there remain uncertainties as to the nature of blending at each cluster (e.g. the volume and profile of hydrogen injections) in general the changes required to commercial and regulatory frameworks are the same implying that they are low regret. Below we summarise gas transporters’ preferred approach to facilitating hydrogen blending from industrial clusters including both the policy decisions needed and the changes required to commercial and regulatory frameworks. We note that this work has not involved a legal review and that one will be required as part of the process of implementing the framework changes described below.