United Kingdom
Experimental Study on Vented Hydrogen Deflagrations in a Low Strength Enclosure
Oct 2015
Publication
This paper describes an experimental programme on vented hydrogen deflagrations which formed part of the Hyindoor project carried out for the EU Fuel Cells and Hydrogen Joint Undertaking. The purpose of this study was to investigate the validity of analytical models used to calculate overpressures following a low concentration hydrogen deflagration. Other aspects of safety were also investigated such as lateral flame length resulting from explosion venting. The experimental programme included the investigation of vented hydrogen deflagrations from a 31 m3 enclosure with a maximum internal overpressure target of 10 kPa (100 mbar). The explosion relief was provided by lightly covered openings in the roof or sidewalls. Uniform and stratified initial hydrogen distributions were included in the test matrix and the location of the ignition source was also varied. The maximum hydrogen concentration used within the enclosure was 14% v/v. The hydrogen concentration profile within the enclosure was measured as were the internal and external pressures. Infrared video images were obtained of the gases vented during the deflagrations. Findings show that the analytical models were generally conservative for overpressure predictions. Flame lengths were found to be far less than suggested by some guidance. Along with the findings the methodology test conditions and corresponding results are presented.
FutureGrid: Project Progress Report
Dec 2021
Publication
The facility will be built from a range of decommissioned transmission assets to create a representative whole-network which will be used to trial hydrogen and will allow for accurate results to be analysed. Blends of hydrogen up to 100% will then be tested at transmission pressures to assess how the assets perform.<br/>The hydrogen research facility will remain separate from the main National Transmission System allowing for testing to be undertaken in a controlled environment with no risk to the safety and reliability of the existing gas transmission network.<br/>Ofgem’s Network Innovation Competition will provide £9.07m of funding with the remaining amount coming from the project partners.<br/>The aim is to start construction in 2021 with testing beginning in 2022.
Installation Permitting Guidance for Hydrogen and Fuel Cell Stationary Applications: UK Version
Jan 2009
Publication
The HYPER project a specific targeted research project (STREP) funded by the European Commission under the Sixth Framework Programme developed an Installation Permitting Guide (IPG) for hydrogen and fuel cell stationary applications. The IPG was developed in response to the growing need for guidance to foster the use and facilitate installation of these systems in Europe. This document presents a modified version of the IPG specifically intended for the UK market. For example reference is made to UK national regulations standards and practices when appropriate as opposed to European ones.<br/>The IPG applies to stationary systems fuelled by hydrogen incorporating fuel cell devices with net electrical output of up to 10 kWel and with total power outputs of the order of 50 kW (combined heat + electrical) suitable for small back up power supplies residential heating combined heat-power (CHP) and small storage systems. Many of the guidelines appropriate for these small systems will also apply to systems up to 100 kWel which will serve small communities or groups of households. The document is not a standard but is a compendium of useful information for a variety of users with a role in installing these systems including design engineers manufacturers architects installers operators/maintenance workers and regulators.<br/>This report and the work it describes were funded by the Health and Safety Executive (HSE). Its contents including any opinions and/or conclusions expressed are those of the authors alone and do not necessarily reflect HSE policy.
High CO2 Absorption Capacity of Metal-Based Ionic Liquids: A Molecular Dynamics Study
Apr 2020
Publication
The absorption of CO2 is of importance in carbon capture utilization and storage technology for greenhouse gas control. In the present work we clarified the mechanism of how metal-based ionic liquids (MBILs) Bmim[XCln]m (X is the metal atom) enhance the CO2 absorption capacity of ILs via performing molecular dynamics simulations. The sparse hydrogen bond interaction network constructed by CO2 and MBILs was identified through the radial distribution function and interaction energy of CO2-ion pairs which increase the absorption capacity of CO2 in MBILs. Then the dynamical properties including residence time and self-diffusion coefficient confirmed that MBILs could also promote the diffusion process of CO2 in ILs. That's to say the MBILs can enhance the CO2 absorption capacity and the diffusive ability simultaneously. Based on the analysis of structural energetic and dynamical properties the CO2 absorption capacity of MBILs increases in the order Cl− → [ZnCl4]2-→ [CuCl4]2-→ [CrCl4]- → [FeCl4]- revealing the fact that the short metal–Cl bond length and small anion volume could facilitate the performance of CO2 absorbing process. These findings show that the metal–Cl bond length and effective volume of the anion can be the effective factors to regulate the CO2 absorption process which can also shed light on the rational molecular design of MBILs for CO2 capture and other key chemical engineering processes such as IL-based gas sensors nano-electrical devices and so on.
H2FC Supergen- The Role of Hydrogen and Fuel Cells in Future Energy Systems
Mar 2017
Publication
This White Paper has been commissioned by the UK Hydrogen and Fuel Cell (H2FC) SUPERGEN Hub to examine the roles and potential benefits of hydrogen and fuel cell technologies in delivering energy security for the UK. The H2FC SUPERGEN Hub is an inclusive network encompassing the entire UK hydrogen and fuel cells research community with around 100 UK-based academics supported by key stakeholders from industry and government. It is funded by the UK EPSRC research council as part of the RCUK Energy Programme. This paper is the second of four that were published over the lifetime of the Hub with the others examining: (i) low-carbon heat; (iii) future energy systems; and (iv) economic impact.
- Fuel cells can contribute to UK energy system security both now and in the future.
- Hydrogen can be produced using a broad range of feedstocks and production processes including renewable electricity.
- Adopting hydrogen as an end-use fuel in the long term increases UK energy diversity.
Recent Studies of Hydrogen Embrittlement in Structural Materials
Dec 2018
Publication
Mechanical properties of metals and their alloys are most often determined by interstitial atoms. Hydrogen as one common interstitial element is often found to degrade the fracture behavior and lead to premature or catastrophic failure in a wide range of materials known as hydrogen embrittlement. This topic has been studied for more than a century yet the basic mechanisms of such degradation remain in dispute for many metallic systems. This work attempts to link experimentally and theoretically between failure caused by the presence of hydrogen and second phases lattice distortion and deformation levels.
Ignited Releases of Liquid Hydrogen
Jan 2014
Publication
If the hydrogen economy is to progress more hydrogen fuelling stations are required. In the short term in the absence of a hydrogen distribution network these fuelling stations will have to be supplied by liquid hydrogen (LH2) road tanker. Such a development will increase the number of tanker offloading operations significantly and these may need to be performed in close proximity to the general public.<br/>Several research projects have been undertaken already at HSL with the aim of identifying and addressing hazards relating to the storage and transport of bulk LH2 that are associated with hydrogen refuelling stations located in urban environments.<br/>The first phase of the research was to produce a position paper on the hazards of LH2 (Pritchard and Rattigan 2009). This was published as an HSE research report RR769 in 2010. <br/>The second phase developed an experimental and modelling strategy for issues associated with LH2 spills and was published as an internal report HSL XS/10/06. The subsequent experimental work is a direct implementation of that strategy. LH2 was first investigated experimentally (Royle and Willoughby 2012 HSL XS/11/70) as large-scale spills of LH2 at a rate of 60 litres per minute. Measurements were made on unignited releases which included the concentration of hydrogen in air thermal gradients in the concrete substrate liquid pool formation and temperatures within the pool. Computational modelling on the un-ignited spills was also performed (Batt and Webber 2012 HSL MSU/12/01).<br/>The experimental work on ignited releases of LH2 detailed in this report is a direct continuation of the work performed by Royle and Willoughby.<br/>The aim of this work was to determine the hazards and severity of a realistic ignited spill of LH2 focussing on; flammability limits of an LH2 vapour cloud flame speeds through an LH2 vapour cloud and subsequent radiative heat and overpressures after ignition. The results of the experimentation will inform the wider hydrogen community and contribute to the development of more robust modelling tools. The results will also help to update and develop guidance for codes and standards.
Concepts for Improving Hydrogen Storage in Nanoporous Materials
Feb 2019
Publication
Hydrogen storage in nanoporous materials has been attracting a great deal of attention in recent years as high gravimetric H2 capacities exceeding 10 wt% in some cases can be achieved at 77 K using materials with particularly high surface areas. However volumetric capacities at low temperatures and both gravimetric and volumetric capacities at ambient temperature need to be improved before such adsorbents become practically viable. This article therefore discusses approaches to increasing the gravimetric and volumetric hydrogen storage capacities of nanoporous materials and maximizing the usable capacity of a material between the upper storage and delivery pressures. In addition recent advances in machine learning and data science provide an opportunity to apply this technology to the search for new materials for hydrogen storage. The large number of possible component combinations and substitutions in various porous materials including Metal-Organic Frameworks (MOFs) is ideally suited to a machine learning approach; so this is also discussed together with some new material types that could prove useful in the future for hydrogen storage applications.
New Insights into the Electrochemical Behaviour of Porous Carbon Electrodes for Supercapacitors
Aug 2018
Publication
Activated carbons with different surface chemistry and porous textures were used to study the mechanism of electrochemical hydrogen and oxygen evolution in supercapacitor devices. Cellulose precursor materials were activated with different potassium hydroxide (KOH) ratios and the electrochemical behaviour was studied in 6 M KOH electrolyte. In situ Raman spectra were collected to obtain the structural changes of the activated carbons under severe electrochemical oxidation and reduction conditions and the obtained data were correlated to the cyclic voltammograms obtained at high anodic and cathodic potentials. Carbon-hydrogen bonds were detected for the materials activated at high KOH ratios which form reversibly under cathodic conditions. The influence of the specific surface area narrow microporosity and functional groups in the carbon electrodes on their chemical stability and hydrogen capture mechanism in supercapacitor applications has been revealed.
Allowable Hydrogen Permeation Rate From Road Vehicle Compressed Gaseous Storage Systems In Garages- Part 1- Introduction, Scenarios, and Estimation of an Allowable Permeation Rate
Sep 2009
Publication
The paper presents an overview of the main results of the EC NOE HySafe activity to estimate an allowable hydrogen permeation rate for automotive legal requirements and standards. The work was undertaken as part of the HySafe internal project InsHyde.<br/>A slow long term hydrogen release such as that due to permeation from a vehicle into an inadequately ventilated enclosed structure is a potential risk associated with the use of hydrogen in automotive applications. Due to its small molecular size hydrogen permeates through the containment materials found in compressed gaseous hydrogen storage systems and is an issue that requires consideration for containers with non-metallic (polymer) liners. Permeation from compressed gaseous hydrogen storage systems is a current hydrogen safety topic relevant to regulatory and standardisation activities at both global and regional levels.<br/>Various rates have been proposed in different draft legal requirements and standards based on different scenarios and the assumption that hydrogen dispenses homogeneously. This paper focuses on the development of a methodology by HySafe Partners (CEA NCSRD. University of Ulster and Volvo Technology) to estimate an allowable upper limit for hydrogen permeation in automotive applications by investigating the behaviour of hydrogen when released at small rates with a focus on European scenario. The background to the activity is explained. reasonable scenarios are identified a methodology proposed and a maximum hydrogen permeation rate from road vehicles into enclosed structures is estimated The work is based on conclusions from the experimental and numerical investigations described by CEA NCSRD and the University of Ulster in related papers.
The Hydrogen Economy - Evaluation of the Materials Science and Engineering Issues
Jan 2005
Publication
The main objectives were to identify materials issues relating to the widespread use of hydrogen as a fuel.
MAIN FINDINGS
MAIN FINDINGS
- Hydrogen is seen by many as the answer to the environmental problems of reliance on fossil fuels for energy needs. A great deal of effort is currently being invested in research into all areas of the hydrogen economy such as fuel cells hydrogen generation transportation and storage.
- Fuel cells have the potential to provide power for a very wide range of applications ranging from small portable electronics devices to large stationary electricity production and vehicles covering the whole range of road vehicles and possibly extending to rail marine and even aviation.
- The main obstacles to achieving a viable hydrogen economy are costs of producing hydrogen from renewable sources issues relating to transportation and storage due to the low energy density of hydrogen gas and the cost and reliability of fuel cells.
- The main material considerations relating to the use of hydrogen are hydrogen embrittlement material properties at cryogenic temperatures (due to use of liquid hydrogen) and permeability.
- A number of new materials are likely to come to prominence in a hydrogen economy; high performance composites are likely to be used extensively for high pressure hydrogen cylinders new materials or combinations of materials may be used for hydrogen pipelines and a range of new materials are currently being considered for hydrogen storage such as metal hydrides and carbon nanotubes.
- Due to the effect of hydrogen on materials it is important to test any materials in the environment in which they would be used. Depending on the type of test this could require the use of very specialist expensive equipment.
Safety and Regulatory Challenges of Using Hydrogen/Natural Gas Blends in the UK
Sep 2019
Publication
The addition of hydrogen to natural gas for heating and cooking is being considered as a route to reducing carbon emissions in the United Kingdom (UK). The HyDeploy programme (hereafter referred to as HyDeploy) aims to demonstrate that hydrogen can be added to the natural gas supply without compromising public safety or appliance performance. This paper relates to the preparatory work for hydrogen injection on a live site at Keele University closed network comprising domestic premises multi-occupancy buildings and light commercial premises. The project is based around the injection of up to 20 %mol/mol hydrogen into mains natural gas at pressures below 2 barg. Work streams addressed during the pre-trial preparation included; assessment of material interaction with hydrogen blends for all distribution system components and appliances; understanding of gas appliance behaviour; review of: gas detection systems fire and explosion considerations routine and emergency procedural considerations; and the design of a new hydrogen injection grid entry unit. This paper describes the safety and regulatory challenges that were encountered during preparation of the project including obtaining the necessary regulatory permissions to blend hydrogen gas.
A Portfolio of Powertrains for the UK: An Energy Systems Analysis
Jul 2014
Publication
There has recently been a concerted effort to commence a transition to fuel cell vehicles (FCVs) in Europe. A coalition of companies released an influential McKinsey-coordinated report in 2010 which concluded that FCVs are ready for commercial deployment. Public–private H2Mobility programmes have subsequently been established across Europe to develop business cases for the introduction of FCVs. In this paper we examine the conclusions of these studies from an energy systems perspective using the UK as a case study. Other UK energy system studies have identified only a minor role for FCVs after 2030 but we reconcile these views by showing that the differences are primarily driven by different data assumptions rather than methodological differences. Some energy system models do not start a transition to FCVs until around 2040 as they do not account for the time normally taken for the diffusion of new powertrains. We show that applying dynamic growth constraints to the UK MARKAL energy system model more realistically represents insights from innovation theory. We conclude that the optimum deployment of FCVs from an energy systems perspective is broadly in line with the roadmap developed by UK H2Mobility and that a transition needs to commence soon if FCVs are to become widespread by 2050.
Cost-competitive Green Hydrogen: How to Lower the Cost of Electrolysers?
Jan 2022
Publication
The higher cost of green hydrogen in comparison to its competitors is the most important barrier to its increased use. Although the cost of renewable electricity is considered to be the key obstacle challenges associated with electrolysers are another major issue that have important implications for the cost reduction of green hydrogen. This paper analyses the electrolysis process from technological economic and policy perspectives. It first provides a comparative analysis of the main existing electrolyser technologies and identifies key trade-offs in terms of cost scarcity of materials used technology readiness and the ability to operate in a flexible mode (which enables them to be coupled with variable renewables generation). The paper then identifies the main cost drivers for each of the most promising technologies and analyses the opportunities for cost reduction. It also draws upon the experience of solar and wind power generation technologies with respect to gradual cost reduction and evaluates development paths that each of the main electrolyser technology types could take in the future. Finally the paper elaborates on the policy mechanisms that could additionally foster cost reduction and the overall business development of electrolyser technologies.
The research paper can be found on their website
The research paper can be found on their website
H2FC SUPERGEN- The Role of Hydrogen and Fuel Cells in Providing Affordable, Secure Low-carbon Heat
May 2014
Publication
This White Paper has been commissioned by the UK Hydrogen and Fuel Cell (H2FC) SUPERGEN Hub to examine the roles and potential benefits of hydrogen and fuel cell technologies for heat provision in future low-carbon energy systems. The H2FC SUPERGEN Hub is an inclusive network encompassing the entire UK hydrogen and fuel cells research community with around 100 UK-based academics supported by key stakeholders from industry and government. It is funded by the UK EPSRC research council as part of the RCUK Energy Programme. This paper is the first of four that will be published over the lifetime of the Hub with the others examining: (i) low-carbon energy systems (including balancing renewable intermittency); (ii) low-carbon transport systems; and (iii) the provision of secure and affordable energy supplies for the future
- Hydrogen and fuel cells are part of the cost-optimal heating technology portfolio in long-term UK energy system scenarios.
- Fuel cell CHP is already being deployed commercially around the world.
- Hydrogen can be a zero-carbon alternative to natural gas. Most technologies that use natural gas can be adapted to use hydrogen and still provide the same level of service.
- Hydrogen and fuel cell technologies avoid some of the disadvantages of other low-carbon heating technologies.
Application of Hydrides in Hydrogen Storage and Compression: Achievements, Outlook and Perspectives
Feb 2019
Publication
José Bellosta von Colbe,
Jose-Ramón Ares,
Jussara Barale,
Marcello Baricco,
Craig Buckley,
Giovanni Capurso,
Noris Gallandat,
David M. Grant,
Matylda N. Guzik,
Isaac Jacob,
Emil H. Jensen,
Julian Jepsen,
Thomas Klassen,
Mykhaylo V. Lototskyy,
Kandavel Manickam,
Amelia Montone,
Julian Puszkiel,
Martin Dornheim,
Sabrina Sartori,
Drew Sheppard,
Alastair D. Stuart,
Gavin Walker,
Colin Webb,
Heena Yang,
Volodymyr A. Yartys,
Andreas Züttel and
Torben R. Jensen
Metal hydrides are known as a potential efficient low-risk option for high-density hydrogen storage since the late 1970s. In this paper the present status and the future perspectives of the use of metal hydrides for hydrogen storage are discussed. Since the early 1990s interstitial metal hydrides are known as base materials for Ni – metal hydride rechargeable batteries. For hydrogen storage metal hydride systems have been developed in the 2010s [1] for use in emergency or backup power units i. e. for stationary applications.<br/>With the development and completion of the first submarines of the U212 A series by HDW (now Thyssen Krupp Marine Systems) in 2003 and its export class U214 in 2004 the use of metal hydrides for hydrogen storage in mobile applications has been established with new application fields coming into focus.<br/>In the last decades a huge number of new intermetallic and partially covalent hydrogen absorbing compounds has been identified and partly more partly less extensively characterized.<br/>In addition based on the thermodynamic properties of metal hydrides this class of materials gives the opportunity to develop a new hydrogen compression technology. They allow the direct conversion from thermal energy into the compression of hydrogen gas without the need of any moving parts. Such compressors have been developed and are nowadays commercially available for pressures up to 200 bar. Metal hydride based compressors for higher pressures are under development. Moreover storage systems consisting of the combination of metal hydrides and high-pressure vessels have been proposed as a realistic solution for on-board hydrogen storage on fuel cell vehicles.<br/>In the frame of the “Hydrogen Storage Systems for Mobile and Stationary Applications” Group in the International Energy Agency (IEA) Hydrogen Task 32 “Hydrogen-based energy storage” different compounds have been and will be scaled-up in the near future and tested in the range of 500 g to several hundred kg for use in hydrogen storage applications.
Spontaneous Ignition of Hydrogen- Literature Review
Jan 2008
Publication
Objectives
The aim of this review is to establish which available literature may be of use as part of the HSE funded project which will investigate spontaneous ignition of accidental hydrogen releases (JR02071). It will identify phenomena that have the potential to cause spontaneous ignition of releases of pressured hydrogen and identify literature that may be of use when formulating the experimental program.
Main Findings
The identification of important work that shows conclusive evidence of spontaneous ignition of hydrogen due to the failure of a boundary layer.
The aim of this review is to establish which available literature may be of use as part of the HSE funded project which will investigate spontaneous ignition of accidental hydrogen releases (JR02071). It will identify phenomena that have the potential to cause spontaneous ignition of releases of pressured hydrogen and identify literature that may be of use when formulating the experimental program.
Main Findings
The identification of important work that shows conclusive evidence of spontaneous ignition of hydrogen due to the failure of a boundary layer.
Enabling Large-scale Hydrogen Storage in Porous Media – The Scientific Challenges
Jan 2021
Publication
Niklas Heinemann,
Juan Alcalde,
Johannes M. Miocic,
Suzanne J. T. Hangx,
Jens Kallmeyer,
Christian Ostertag-Henning,
Aliakbar Hassanpouryouzband,
Eike M. Thaysen,
Gion J. Strobel,
Cornelia Schmidt-Hattenberger,
Katriona Edlmann,
Mark Wilkinson,
Michelle Bentham,
Stuart Haszeldine,
Ramon Carbonell and
Alexander Rudloff
Expectations for energy storage are high but large-scale underground hydrogen storage in porous media (UHSP) remains largely untested. This article identifies and discusses the scientific challenges of hydrogen storage in porous media for safe and efficient large-scale energy storage to enable a global hydrogen economy. To facilitate hydrogen supply on the scales required for a zero-carbon future it must be stored in porous geological formations such as saline aquifers and depleted hydrocarbon reservoirs. Large-scale UHSP offers the much-needed capacity to balance inter-seasonal discrepancies between demand and supply decouple energy generation from demand and decarbonise heating and transport supporting decarbonisation of the entire energy system. Despite the vast opportunity provided by UHSP the maturity is considered low and as such UHSP is associated with several uncertainties and challenges. Here the safety and economic impacts triggered by poorly understood key processes are identified such as the formation of corrosive hydrogen sulfide gas hydrogen loss due to the activity of microbes or permeability changes due to geochemical interactions impacting on the predictability of hydrogen flow through porous media. The wide range of scientific challenges facing UHSP are outlined to improve procedures and workflows for the hydrogen storage cycle from site selection to storage site operation. Multidisciplinary research including reservoir engineering chemistry geology and microbiology more complex than required for CH4 or CO2 storage is required in order to implement the safe efficient and much needed large-scale commercial deployment of UHSP.
HyDeploy Webinar - Unlocking the Deployment of Hydrogen in the Grid
May 2020
Publication
A project overview of HyDeploy project led by Cadent Gas and supported by Northern Gas Networks Progressive Energy Ltd Keele University HSE – Science Division and ITM Power.
First Phase:
HyDeploy at Keele is the first stage of this three stage programme. In November 2019 the UK Health & Safety Executive gave permission to run a live test of blended hydrogen and natural gas on part of the private gas network at Keele University campus in Staffordshire. HyDeploy is the first project in the UK to inject hydrogen into a natural gas network.
Second and Third Phases;
Once the Keele stage has been completed HyDeploy will move to a larger demonstration on a public network in the North East. After that HyDeploy will have another large demonstration in the North West. These are designed to test the blend across a range of networks and customers so that the evidence is representative of the UK as a whole. With HSE approval and success at Keele these phases will go ahead in the early 2020s.
The longer term goal:
Once the evidence has been submitted to Government policy makers we very much expect hydrogen to take its place alongside other forms of zero carbon energy in meeting the needs of the UK population.
First Phase:
HyDeploy at Keele is the first stage of this three stage programme. In November 2019 the UK Health & Safety Executive gave permission to run a live test of blended hydrogen and natural gas on part of the private gas network at Keele University campus in Staffordshire. HyDeploy is the first project in the UK to inject hydrogen into a natural gas network.
Second and Third Phases;
Once the Keele stage has been completed HyDeploy will move to a larger demonstration on a public network in the North East. After that HyDeploy will have another large demonstration in the North West. These are designed to test the blend across a range of networks and customers so that the evidence is representative of the UK as a whole. With HSE approval and success at Keele these phases will go ahead in the early 2020s.
The longer term goal:
Once the evidence has been submitted to Government policy makers we very much expect hydrogen to take its place alongside other forms of zero carbon energy in meeting the needs of the UK population.
Bioanode and Biocathode Performance in a Microbial Electrolysis Cell
Jan 2017
Publication
The bioanode is important for a microbial electrolysis cell (MEC) and its robustness to maintain its catalytic activity affects the performance of the whole system. Bioanodes enriched at a potential of +0.2 V (vs. standard hydrogen electrode) were able to sustain their oxidation activity when the anode potential was varied from 0.3 up to +1.0 V. Chronoamperometric test revealed that the bioanode produced peak current density of 0.36 A/m2 and 0.37 A/m2 at applied potential 0 and +0.6 V respectively. Meanwhile hydrogen production at the biocathode was proportional to the applied potential in the range from 0.5 to 1.0 V. The highest production rate was 7.4 L H2/(m2 cathode area)/day at 1.0 V cathode potential. A limited current output at the bioanode could halt the biocathode capability to generate hydrogen. Therefore maximum applied potential that can be applied to the biocathode was calculated as 0.84 V without overloading the bioanode
A Simple Model for Calculating Peak Pressure in Vented Explosions of Hydrogen and Hydrocarbons
Apr 2019
Publication
The authors presented a basic mathematical model for estimating peak overpressure attained in vented explosions of hydrogen in a previous study (Sinha et al. [1]). The model focussed on idealized cases of hydrogen and was not applicable for realistic accidental scenarios like presence of obstacles initial turbulent mixture etc. In the present study the underlying framework of the model is reformulated to overcome these limitations. The flame shape computations are simplified. A more accurate and simpler formulation for venting is also introduced. Further by using simplifying assumptions and algebraic manipulations the detailed model consisting of several equations is reduced to a single equation with only four parameters. Two of these parameters depend only on fuel properties and a standard table provided in the Appendix can be used. Therefore to compute the overpressure only the two parameters based on enclosure geometry need to be evaluated. This greatly simplifies the model and calculation effort. Also since the focus of previous investigation was hydrogen properties of hydrocarbon fuels which are much more widely used were not accounted for. The present model also accounts for thermo-physical properties of hydrocarbons and provides table for fuel parameters to be used in the final equation for propane and methane. The model is also improved by addition of different sub-models to account for various realistic accidental scenarios. Moreover no adjustable parameters are used; the same equation is used for all conditions and all gases. Predictions from this simplified model are compared with experimentally measured values of overpressure for hydrogen and hydrocarbons and found to be in good agreement. First the results from experiments focussing on idealized conditions of uniformly mixed fuel in an empty enclosure under quiescent conditions are considered. Further the model applicability is also tested for realistic conditions of accidental explosion consisting of obstacles inside the enclosure non-uniform fuel distribution initial turbulent mixture etc. For all the cases tested the new simple model is found to produce reasonably good predictions.
Carbon Capture and Storage (CCS): The Way Forward
Mar 2018
Publication
Mai Bui,
Claire S. Adjiman,
André Bardow,
Edward J. Anthony,
Andy Boston,
Solomon Brown,
Paul Fennell,
Sabine Fuss,
Amparo Galindo,
Leigh A. Hackett,
Jason P. Hallett,
Howard J. Herzog,
George Jackson,
Jasmin Kemper,
Samuel Krevor,
Geoffrey C. Maitland,
Michael Matuszewski,
Ian Metcalfe,
Camille Petit,
Graeme Puxty,
Jeffrey Reimer,
David M. Reiner,
Edward S. Rubin,
Stuart A. Scott,
Nilay Shah,
Berend Smit,
J. P. Martin Trusler,
Paul Webley,
Jennifer Wilcox and
Niall Mac Dowell
Carbon capture and storage (CCS) is broadly recognised as having the potential to play a key role in meeting climate change targets delivering low carbon heat and power decarbonising industry and more recently its ability to facilitate the net removal of CO2 from the atmosphere. However despite this broad consensus and its technical maturity CCS has not yet been deployed on a scale commensurate with the ambitions articulated a decade ago. Thus in this paper we review the current state-of-the-art of CO2 capture transport utilisation and storage from a multi-scale perspective moving from the global to molecular scales. In light of the COP21 commitments to limit warming to less than 2 °C we extend the remit of this study to include the key negative emissions technologies (NETs) of bioenergy with CCS (BECCS) and direct air capture (DAC). Cognisant of the non-technical barriers to deploying CCS we reflect on recent experience from the UK's CCS commercialisation programme and consider the commercial and political barriers to the large-scale deployment of CCS. In all areas we focus on identifying and clearly articulating the key research challenges that could usefully be addressed in the coming decade.
Power Generation Analysis of Terrestrial Ultraviolet-Assisted Solid Oxide Electrolyzer Cell
Jan 2022
Publication
This paper presents a novel system design that considerably improves the entrapment of terrestrial ultraviolet (UV) irradiance in a customized honeycomb structure to produce hydrogen at a standard rate of 7.57 slpm for places with a UV index > 11. Thermolysis of high salinity water is done by employing a solid oxide electrolyzer cell (SOEC) which comprises three customized novel active optical subsystems to filter track and concentrate terrestrial UV solar irradiance by Fresnel lenses. The output of systems is fed to a desalinator a photovoltaic system to produce electrical energy and a steam generator with modified surface morphology to generate the required superheated steam for the SOEC. A simulation in COMSOL Multiphysics ver. 5.6 has shown that a customized honeycomb structure when incorporated on the copper–nickel surface of a steam generator improves its absorptance coefficient up to 93.43% (48.98%—flat case). This results in generating the required superheated steam of 650 ◦C with a designed active optical system comprising nine Fresnel lenses (7 m2 ) that offer the concentration of 36 suns on the honeycomb structure of the steam generator as input. The required 1.27 kW of electrical power is obtained by concentrating the photovoltaic system using In0.33Ga0.67N/Si/InN solar cells. This production of hydrogen is sustainable and cost effective as the estimated cost over 5 years by the proposed system is 0.51 USD/kg compared to the commercially available system which costs 3.18 USD/kg.
Hydrogen for Heating? Decarbonization Options for Households in the United Kingdom in 2050
Dec 2020
Publication
The heating sector makes up 10% of the United Kingdom’s carbon footprint and residential homes account for a majority of demand. At present central heating from a natural gas-fired boiler is the most common system in the UK but low or zero-carbon hydrogen and renewable electricity are the two primary energy replacement options to reduce the carbon footprint. An important consideration is how using either energy source would affect heating costs. This assessment projects the costs for a typical single-family UK household and climate performance in 2050 using low-GHG or GHG-neutral hydrogen renewable electricity or a combination of both. The cost of using boilers or fuel cells in 2050 with two types of hydrogen are assessed: produced via steam-methane reforming (SMR) combined with carbon capture and storage (CCS) and electrolysis using zero-carbon renewable electricity. The costs of heat pumps the most promising heating technology for the direct use of renewable electricity are also assessed in two scenarios: a heat pump only and a hybrid heat pump with an auxiliary hydrogen boiler.
You can download this document from the International Council On Clean Transportation website linked here
You can download this document from the International Council On Clean Transportation website linked here
Consequences of Catastrophic Releases of Ignited and Unignited Hydrogen Jet Releases
Sep 2009
Publication
The possibility of using a risk based approach for the safe installation and siting of stationary fuel cell systems depends upon the availability of normative data and guidance on potential hazards and the probabilities of their occurrence. Such guidance data is readily available for most common hydrocarbon fuels. For hydrogen however data is still required on the hazards associated with different release scenarios. This data can then be related to the probability of different types of scenarios from historical fault data to allow safety distances to be defined and controlled using different techniques. Some data on releases has started to appear but this data generally relates to hydrogen vehicle refuelling systems that are designed for larger throughput higher pressures and the general use of larger pipe diameters than are likely to be used for small fuel cell systems.
Prediction of Third Party Damage Failure Frequency for Pipelines Transporting Mixtures of Natural Gas and Hydrogen
Sep 2009
Publication
As Europe is gradually moving towards a hydrogen based society it has been acknowledged that adding certain amount of hydrogen as a clean energy carrier to the existing natural gas pipeline will help reduce the CO2 emissions which contribute to the greenhouse effect. On the other hand hydrogen has been demonstrated to be able to change the behaviour of the pipeline steel such as lower toughness and faster crack growth due to hydrogen embrittlement. Therefore it is necessary that the risks associated with the failure of the pipeline carrying mixtures of natural gas and hydrogen be assessed.<br/>The study reported in this paper is part of European NATURALHY project whose aim is to investigate the possibility of using the existing natural gas transmission pipelines to convey natural gas/hydrogen mixtures. According to the EGIG database the most common cause of failure for the existing natural gas pipelines is third party damage which mainly refers to a gouge a dent/gouge combination of known geometry. Among third party damage failures 90% are the result of immediate failure i.e. leakage or rupture of the pipeline and only 10% of them are the result of delayed failure. While its not expected that hydrogen will impact the immediate failure it could increase the vulnerability of the pipe to delayed failure through the initiation or activation of crack like defects.<br/>This paper will present a methodology to predict the probability of increased failures and describe a software tool that has been developed to perform the calculations.
Annual Science Review 2019
Mar 2019
Publication
Having a robust evidence base enables us to tackle real issues causing pain and suffering in the workplace. Critically it enables us to better understand developing issues and ways of working to ensure that we support innovation rather than stifle it through lack of knowledge. For example the work on the use of 3D printers in schools demonstrates HSE’s bility to engage and understand the risks to encourage safe innovation in a developing area (see p47).<br/>Other examples in this report show just a selection of the excellent work carried out by our staff often collaborating with others which contributes to improving how we regulate health and safety risks proportionately and effectively.<br/>One of HSEs key priorities is to prevent future cases of occupational lung disease by improving the management and control of hazardous substances. The case study on measuring Respirable Crystalline Silica exposure contributes to this and to recognise developing and future issues such as the work on diacetyl in the coffee industry (see p24 and p39). This type of scientific investigation gives our regulators good trusted information enabling critical decisions on the actions needed to protect workers.<br/>The case study on publishing new guidance on the use of Metalworking Fluids (MWF) demonstrates the important contribution of collaborative science to improving regulation. If used inappropriately exposure to MWF mist can cause serious long-term lung disease and it was recognised that users needed help to control this risk. HSE scientists and regulators worked with industry stakeholders to produce new free guidance which reflects changes in scientific understanding in a practical easy to use guide. As well as enabling users to better manage the risks and as a bonus likely save money it has assisted regulation by providing clear benchmarks for all to judge control against. An excellent example of science contributing to controlling serious health risks (see p22).<br/>These case studies are excellent examples of how science contributes to reducing risk. Hopefully they will inspire you to think about how risk in your workplace could be improved and where further work might be needed.
Irreproducibility in Hydrogen Storage Material Research
Sep 2016
Publication
The storage of hydrogen in materials has received a significant amount of attention in recent years because this approach is widely thought to be one of the most promising solutions to the problem of storing hydrogen for use as an alternative energy carrier in a safe compact and affordable form. However there have been a number of high profile cases in which erroneous or irreproducible data have been published. Meanwhile the irreproducibility of research results in a wide range of disciplines has been the subject of an increasing amount of attention due to problems with some of the data in the literature. In this Perspective we provide a summary of the problems that have affected hydrogen storage material research. We also discuss the reasons behind them and possible ways of reducing the likelihood of further problems occurring in the future.
Decarbonising Ships, Planes and Trucks: An Analysis of Suitable Low-carbon Fuels for the Maritime, Aviation and Haulage Sectors
Jan 2021
Publication
The high environmental impacts of transport mean that there is an increasing interest in utilising low-carbon alternative energy carriers and powertrains within the sector. While electricity has been mooted as the energy carrier of choice for passenger vehicles as the mass and range of the vehicle increases electrification becomes more difficult. This paper reviews the shipping aviation and haulage sectors and a range of low-carbon energy carriers (electricity biofuels hydrogen and electro fuels) that can be used to decarbonise them. Energy carriers were assessed based on their energy density specific energy cost lifecycle greenhouse gas emissions and land-use. In terms of haulage current battery electric vehicles may be technically feasible however the specific energy of current battery technology reduces the payload capacity and range when compared to diesel. To alleviate these issues biomethane represents a mature technology with potential co-benefits while hydrogen is close to competitiveness but requires significant infrastructure. Energy density issues preclude the use of batteries in shipping which requires energy dense liquids or compressed gaseous fuels that allow for retrofits/current hull designs with methanol being particularly appropriate here. Future shipping may be achieved with ammonia or hydrogen but hull design will need to be changed significantly. Regulations and aircraft design mean that commercial aviation is dependant on drop-in jet fuels for the foreseeable future with power-to-liquid fuels being deemed the most suitable option due to the scales required. Fuel costs and a lack of refuelling infrastructure were identified as key barriers facing the uptake of alternatives with policy and financial incentives required to encourage the uptake of low-carbon fuels.
Health and safety in the new energy economy
Dec 2010
Publication
Over the next decade and beyond the UK is set to take significant steps towards a new energy economy. This will be an economy where the technologies meeting<br/>our electricity heat and fuel needs have to deliver against three key criteria: sustainability security and affordability.<br/><br/>In this context a wide range of emerging energy technologies are expected to play an important role in reshaping the way we satisfy our energy requirements. The extent to which they do so however will depend fundamentally on their ability to be harnessed safely.<br/><br/>Compiled by HSE’s Emerging Energy Technologies Programme this report provides a current assessment of the health and safety hazards that key emerging energy technologies could pose both to workers and to the public at large. (Nuclear energy technologies fall outside the scope of this report.) But it also highlights how an appropriate framework can be and is being put in place to help ensure that these hazards are managed and controlled effectively – an essential<br/>element in enabling the technologies to make a major contribution to the UK’s energy future.
Indoor Use of Hydrogen, Knowledge Gaps and Priorities for the Improvement of Current Standards on Hydrogen, a Presentation of HyIndoor European Project
Sep 2013
Publication
To develop safety strategies for the use of hydrogen indoors the HyIndoor project is studying the behaviour of a hydrogen release deflagration or non-premixed flame in an enclosed space such as a fuel cell or its cabinet a room or a warehouse. The paper proposes a safety approach based on safety objectives that can be used to take various scenarios of hydrogen leaks into account for the safe design of Hydrogen and Fuel Cell (HFC) early market applications. Knowledge gaps on current engineering models and unknown influence of specific parameters were identified and prioritized thereby re-focusing the objectives of the project test campaign and numerical simulations. This approach will enable the improvement of the specification of openings and use of hydrogen sensors for enclosed spaces. The results will be disseminated to all stakeholders including hydrogen industry and RCS bodies.
Effect of Rotation on Ignition Thresholds of Stoichiometric Hydrogen Mixtures
Sep 2017
Publication
Successful transition to a hydrogen economy calls for a deep understanding of the risks associated with its widespread use. Accidental ignition of hydrogen by hot surfaces is one of such risks. In the present study we investigated the effect that rotation has on the reported ignition thresholds by numerically determining the minimum surface temperature required to ignite stoichiometric hydrogen-air using a hot horizontal cylinder rotating at various angular velocities ω. Numerical experiments showed a weak but interesting dependence of the ignition thresholds on rotation: the ignition thresholds increased by 8 K from 931 K to 939 K with increasing angular velocity (0 ≤ ω ≤ 240 rad/s). A further increase to ω = 480 rad/s resulted in a decrease in ignition surface temperature to 935 K. Detailed analysis of the flow patterns inside the vessel and in close proximity to the hot surface brought about by the combined effect of buoyancy and rotation as well as of the distribution of the wall heat flux along the circumference of the cylinder support our previous findings in which regions where temperature gradients are small were found to be prone to ignition.
Reversible Ammonia-based and Liquid Organic Hydrogen Carriers for High-density Hydrogen Storage: Recent Progress
Feb 2019
Publication
Liquid hydrogen carriers are considered to be attractive hydrogen storage options because of their ease of integration into existing chemical transportation infrastructures when compared with liquid or compressed hydrogen. The development of such carriers forms part of the work of the International Energy Agency Task 32: Hydrogen-Based Energy Storage. Here we report the state-of-the-art for ammonia-based and liquid organic hydrogen carriers with a particular focus on the challenge of ensuring easily regenerable high-density hydrogen storage.
East Coast Hydrogen Feasibility Report
Nov 2021
Publication
The highlights of the report include:
- East Coast Hydrogen has the potential to connect up to 7GW of hydrogen production by 2030 alone exceeding the UK Government’s 5GW by 2030 target in a single project. It represents an unmissable opportunity for government and the private sector to work together in delivering on our ambitious decarbonisation targets.
- East Coast Hydrogen can use the natural assets of the North of England including existing and potential hydrogen storage facilities and build on the hydrogen production in two of the UK’s largest industrial clusters in the North East and North West in turn ensuring significant private sector investment in the UK’s industrial heartlands.
- This would be the first step in the conversion of our national gas grid to hydrogen and will act as a blueprint for subsequent conversions across the UK.
- The project will also demonstrate the innovation engineering capabilities and economic opportunity in the North and create tens of thousands of highly skilled Green jobs in the future hydrogen economy."
Hydrogen Production, Distribution, Storage and Power Conversion in a Hydrogen Economy - A Technology Review
Aug 2021
Publication
To meet ambitious targets for greenhouse gas emissions reduction in the 2035-2050 timeframe hydrogen has been identified as a clean “green” fuel of interest. In comparison to fossil fuel use the burning of hydrogen results in zero CO2 emissions and it can be obtained from renewable energy sources. In addition to zero CO2 emissions hydrogen has several other attractive properties such as higher gravimetric energy content and wider flammability limits than most fossil fuels. However there are practical limitations to its widespread use at present which include low volumetric energy density in the gaseous state and high well-to-wheel costs when compared to fossil fuel production and distribution. In this paper a review is undertaken to identify the current state of development of key areas of the hydrogen network such as production distribution storage and power conversion technology. At present high technology costs still are a barrier to widespread hydrogen adoption but it is envisioned that as scale of production increases then costs are likely to fall. Technical barriers to a hydrogen economy adoption are not as significant as one might think as key technologies in the hydrogen network are already mature with working prototypes already developed for technologies such as liquid hydrogen composite cryotanks and proton exchange membrane fuel cells. It is envisioned that with continuous investment to achieve requisite scale that a hydrogen economy could be realised sooner rather than later with novel concepts such as turboelectric distributed propulsion enabled by a shift to hydrogen-powered network.
HyDeploy2 Report: Exemption
Jun 2021
Publication
Exemption is requested by Northern Gas Networks Ltd (NGN) from the obligation set out in Regulation 8(1) of the Gas Safety (Management) Regulations 1996 (GSMR) to convey only natural gas that is compliant with the Interchangeability requirements of Part I of Schedule 3 of the GSMR within a section of the NGN gas distribution network near Winlaton (the “field trial area”). The field trial area is owned and operated by Northern Gas Networks Ltd. The proposed conveyance of non-compliant gas (hereafter called the “Winlaton Field Trial”) will last for one year and is part of the Network Innovation Competition Project “HyDeploy2”.<br/>The project the first two phases of which are funded under the UK Network Innovation Competition scheme aims to demonstrate that natural gas containing levels of hydrogen beyond the upper limit set out in Schedule 3 of in the Gas Safety (Management) Regulations (GSMR) can be distributed and utilised safely and efficiently in the UK gas distribution networks. The first phase of the HyDeploy project is currently underway and includes a 10-month field trial that of hydrogen injection into part of a private gas distribution system owned and operated by Keele University. The second phase of the HyDeploy project (HyDeploy2) continues on from the work of the first phase and is scheduled to conclude with two 12-month field trials in which hydrogen will be injected into public gas networks owned and operated by NGN and Cadent Gas.<br/>Click on the supplements tab to view the other documents from this report
IGEM/SR/23 Review of Thermal Radiation and Noise for Hydrogen Venting
Nov 2021
Publication
IGEM/SR/23 (“Venting of natural gas”) provides recommendations for the conceptual design operation and safety aspects of permanent temporary and emergency venting of natural gas. The document was originally developed many years ago and the current edition dates to 1995. The document is due to be reviewed and updated for application to natural gas but the aim of this study is not to review the applicability of the document for natural gas but to assess the possible impact of 100% hydrogen on specific aspects of the existing guidance.<br/>A key element of the guidance concerns the safe dispersion distances for natural gas as vents are intended to provide a means of safely dispersing gas in the atmosphere without ignition. Guidance on safe dispersion distances for venting are provided in Section 6.6 accompanied by graphs showing the relationship between the mass flow rate through the vent and the safe (horizontal) dispersion distance. Details of the model used to predict the dispersion distances are given in Appendix 1. However for dispersion the guidance in IGEM/SR/23 has been superseded by similar guidance on hazard distances for unignited releases in IGEM/SR/25 (“Hazardous area classification of natural gas installations”) [2]. A comprehensive review of the applicability of IGEM/SR/25 to hydrogen is already underway for the LTS Futures project and is not duplicated here.<br/>However IGEM/SR/23 contains guidance on other important aspects relevant to the safe design and operation of vents which are not addressed elsewhere in the IGEM suite of standards; in particular guidance on hazard ranges for thermal radiation (in the event of an unplanned ignition of the venting gas) and noise.<br/>The main aim of this report is to assess the potential impact of replacing natural gas with 100% hydrogen on the guidance in IGEM/SR/23 concerned with thermal hazards with a secondary objective of assessing the available information to comment on the possible influence of hydrogen on noise.
A Combined Heat and Green Hydrogen (CHH) Generator Integrated with a Heat Network
Sep 2021
Publication
Combined heat and power (CHP) systems offer high energy efficiencies as they utilise both the electricity generated and any excess heat by co-suppling to local consumers. This work presents the potential of a combined heat and hydrogen (CHH) system a solution where Proton exchange membrane (PEM) electrolysis systems producing hydrogen at 60–70% efficiency also co-supply the excess heat to local heat networks. This work investigates the method of capture and utilisation of the excess heat from electrolysis. The analysed system was able to capture 312 kW of thermal energy per MW of electricity and can deliver it as heated water at either 75 ◦C or 45 ◦C this appropriate for existing district heat networks and lower temperature heat networks respectively. This yields an overall CHH system efficiency of 94.6%. An economic analysis was conducted based on income generated through revenue sales of both hydrogen and heat which resulted in a significant reduction in the Levelized Cost of Hydrogen.
Energy and Utility Skills - Hydrogen Competency Framework Report
Jul 2021
Publication
In 2020 the Department for Business Enterprise and Industrial Strategy (BEIS) commissioned Energy & Utility Skills to develop and deliver a Hydrogen Competency Framework as part of the Hy4Heat programme. The successful completion of this work is detailed in a new report published today.
The work done by Energy & Utility Skills was underpinned by three key pillars:
Collaboration
The resulting outputs of the design development stages are:
More details about this report can be found on the Energy & Utility Skills website.
The work done by Energy & Utility Skills was underpinned by three key pillars:
Collaboration
- Driving growth in engagement levels across the industry
- Designing the framework for both initial trials and any future rollout
- The framework ensures engineers will have all the skills knowledge and understanding they need
The resulting outputs of the design development stages are:
- A Comparative Analysis of Hydrogen and existing hydrocarbon gases
- A Skills Matrix that translates the analysis into skills knowledge and understanding
- An Interim Hydrogen Technical Standard that defines acceptable parameters and requirements for hydrogen installation work
- A Hydrogen Training Specification that will enable training course consistency and facilitate industry recognition
- An independent Hydrogen Assessment Module that will facilitate the addition of a hydrogen competence category on the Gas Safe Register
More details about this report can be found on the Energy & Utility Skills website.
Hybrid Hydrogen PEM Fuel Cell and Batteries Without DC–DC Converter
Sep 2013
Publication
Concerns about greenhouse gases as well as the price and security of oil supply have acted as a spur to sustainable automobile development. The hydrogen fuel cells electric vehicle (HFCEV) is generally recognised by leading automobile manufacturers and scientists as one of the optimum technologies for long-term future low carbon vehicle. In a typical HFCEV power train a DC–DC converter is required to balance the voltage difference between the fuel cells (FCs) stack and batteries. However research shows that a considerable amount of energy generated by the hydrogen FCs stack is deplete during this conversion process as heat. This experiment aims to improve the power train efficiency by eliminating the DC–DC converter by finding the best combination of FC stack and batteries matching the size and capacity of the electrical components.
Characterization of the Hazards from Jet Releases of Hydrogen
Sep 2005
Publication
Hydrogen is a convenient energy storage medium; it can be produced from fossil fuels and biomass via chemical conversion processes or from intermittent renewable sources like wind and solar via electrolysis. It is the fuel of choice for the clean fuel-cell vehicles of the future. If the general public are to use hydrogen as a vehicle fuel customers must be able to handle hydrogen with the same degree of confidence and with comparable risk as conventional liquid and gaseous fuels. For the safe design of retail facilities through the development of appropriate codes and standards it is essential to understand all the hazards that could arise following an accidental release of hydrogen. If it is to be stored and used as a high-pressure gas the hazards associated with jet releases from accidental leaks must be considered. This paper describes work by Shell and the Health and Safety Laboratory to characterise the hazards from jet releases of hydrogen. Jet release experiments have been carried out using small leaks (circular holes ranging from 1 mm to 12 mm diameter) at system pressures up to 150 barg. Concentration measurements were made in the unignited free jets to determine the extent of the flammable cloud generated. Ignited jets were observed both in the visible and infrared to determine the flame size and shape. The experimental results for the extent of the flammable cloud and jet flame length were found to be in good agreement with model predictions.
Narratives for Natural Gas in a Decarbonising European Energy Market
Feb 2019
Publication
The advocacy narrative of the European Union gas community which focused on coal to gas switching and backing up renewables has failed to convince governments NGOs and media commentators that it can achieve post-2030 decarbonisation targets. The gas community therefore needs to develop decarbonisation narratives showing how it will develop commercial scale projects for biogas biomethane and hydrogen from power to gas (electrolysis) and reformed methane. COP21 carbon targets require an accelerating decline in EU methane demand starting around 2030. In 2050 the maximum projected availability of renewable gas is equivalent to 25 per cent of current EU gas demand. Maintaining current demand levels will therefore require very substantial volumes of hydrogen from reformed methane with carbon capture and storage (CCS). Pipeline gas and LNG suppliers will need to progressively decarbonise their product if it is to remain saleable in Europe. However networks face an existential threat unless they can maintain existing throughput while simultaneously adapting to a decarbonised product. Significant threats and challenges to these narratives include: short term geopolitical concerns stemming from dependence on Russian gas ‘hydrocarbon rejectionism’ and an inability of companies to invest for a post-2030 decarbonised future. Governments will need to shift current policy and regulatory frameworks from competition to decarbonisation which will require a ‘regulatory revolution’. In addition to government funding and regulatory support there will need to be very substantial corporate investment in projects for which there is currently no business case. Failure of the gas community to create and deliver credible decarbonisation narratives is likely to result in the adoption of electrification rather than gas decarbonisation options.
Consumer Attitudes to Fuel Cell Vehicles Post Trial in the United Kingdom
Mar 2016
Publication
Fuel cell vehicles (FCVs) have clear societal and environmental benefits and can help mitigate the issues of climate change urban air pollution and oil dependence. In order for FCVs to have the biggest impact on these issues they need to be employed in large numbers. First though they need to be adopted by consumers. Their acceptance depends on positive consumer attitudes towards the vehicles. Currently there is a limited understanding within the literature on how consumers perceive FCVs and what the likelihood of adoption by consumers would be despite significant governmental and organisational investments into the technology. Therefore this study assesses consumer attitudes towards FCVs in the United Kingdom. 81 persons drove a Hyundai FCV at the Low Carbon Vehicle Event in September 2015 of which 30 took part in this study. The results show that at present FCVs are perceived mostly as being similar to incumbent internal combustion engine vehicles. This is an admirable technical achievement however in order for consumers to adopt FCVs they will need to be perceived as having distinctive benefits. Two significant barriers to the adoption of FCVs are observed in this sample: high costs and lack of refuelling infrastructure. This paper goes on to make suggestions on how and which beneficial attributes of the vehicles can be promoted to consumers and also makes suggestions on how the barriers can be overcame so that FCVs will be adopted by consumers.
Strategies for the Sampling of Hydrogen at Refuelling Stations for Purity Assessment
Aug 2021
Publication
Hydrogen delivered at hydrogen refuelling station must be compliant with requirements stated in different standards which require specialized sampling device and personnel to operate it. Currently different strategies are implemented in different parts of the world and these strategies have already been used to perform 100s of hydrogen fuel sampling in USA EU and Japan. However these strategies have never been compared on a large systematic study. The purpose of this paper is to describe and compare the different strategies for sampling hydrogen at the nozzle and summarize the key aspects of all the existing hydrogen fuel sampling including discussion on material compatibility with the impurities that must be assessed. This review highlights the fact it is currently difficult to evaluate the impact or the difference these strategies would have on the hydrogen fuel quality assessment. Therefore comparative sampling studies are required to evaluate the equivalence between the different sampling strategies. This is the first step to support the standardization of hydrogen fuel sampling and to identify future research and development area for hydrogen fuel sampling.
Refuelling Infrastructure Requirements for Renewable Hydrogen Road Fuel through the Energy Transition
Nov 2022
Publication
Current commercially available options for decarbonisation of road transport are battery electric vehicles or hydrogen fuel cell electric vehicles. BEVs are increasingly deployed while hydrogen is in its infancy. We examine the infrastructure necessary to support hydrogen fuelling to various degrees of market penetration. Scotland makes a good exemplar of transport transition with a world leading Net-Zero ambition and proven pathways for generating ample renewable energy. We identified essential elements of the new transport systems and the associated capital expenditure. We developed nine scenarios based on the pace of change and the ultimate market share of hydrogen and constructed a model to analyse their infrastructure requirements. This is a multi-period model incorporating Monte Carlo and Markov Chain elements. A “no-regrets” initial action is rapid deployment of enough hydrogen infrastructure to facilitate the early years of a scenario where diesel fuel becomes replaced with hydrogen. Even in a lower demand scenario of only large and heavy goods vehicles using hydrogen the same infrastructure would be required within a further two years. Subsequent investment in infrastructure could be considered in the light of this initial development.
Numerical Characterization of Under-expanded Cryogenic Hydrogen Gas Jets
Sep 2022
Publication
High-resolution direct numerical simulations are conducted for under-expanded cryogenic hydrogen gas jets to characterize the nearfield flow physics. The basic flow features and jet dynamics are analyzed in detail revealing the existence of four stages during early jet development namely (a) initial penetration (b) establishment of near-nozzle expansion (c) formation of downstream compression and (d) wave propagation. Complex acoustic waves are formed around the under-expanded jets. The jet expansion can also lead to conditions for local liquefaction from the pressurized cryogenic hydrogen gas release. A series of simulations are conducted with systematically varied nozzle pressure ratios and systematically changed exit diameters. The acoustic waves around the jets are found to waken with the decrease in the nozzle pressure ratio. The increase in the nozzle pressure ratio is found to accelerate hydrogen dispersion and widen the regions with hydrogen liquefaction potential. The increase in the nozzle exit diameter also widens the region with hydrogen liquefaction potential but slows down the evolution of the flow structures.
Gauging Public Perceptions of Blue and Green Hydrogen Futures: Is the Twin-track Approach Compatible with Hydrogen Acceptance?
Jun 2023
Publication
National hydrogen strategies are emerging as a critical pillar of climate change policy. For homes connected to the gas grid hydrogen may offer an alternative decarbonisation pathway to electrification. Hydrogen production pathways in countries such as the UK will involve both the gas network and the electricity grid with related policy choices and investment decisions impacting the potential configuration of consumer acceptance for hydrogen homes. Despite the risk of public resistance be it on environmental economic or social grounds few studies have explored the emerging contours of domestic hydrogen acceptance. To date there is scarce evidence on public perceptions of national hydrogen policy and the extent to which attitudes may be rooted in prior knowledge and awareness or open to change following information provision and engagement. In response this study evaluates consumer preferences for a low-carbon energy future wherein parts of the UK housing stock may adopt low-carbon hydrogen boilers and hobs. Drawing on data from online focus groups we examine consumer perceptions of the government's twin-track approach which envisions important roles for both ‘blue’ and ‘green’ hydrogen to meet net zero ambitions. Through a mixed-methods multigroup analysis the underlying motivation is to explore whether the twin-track approach appears compatible with hydrogen acceptance. Moving forward hydrogen policy should ensure greater transparency concerning the benefits costs and risks of the transition with clearer communication about the justification for supporting respective hydrogen production pathways.
Performance of Three Typical Domestic Gas Stoves Operated with Methane-hydrogen Mixture
Dec 2022
Publication
Hydrogen blending into natural gas has attracted significant attention in domestic applications. The paper studied the effects of natural gas mixed with hydrogen at 0% (vol) 5% 10% 15% 20% and 25% on the performance of typical round-port gas stove (TRPGS) swirling strip-port gas stove (SSPGS) and radiant porous media gas stove (RPMGS). The experimental results show that flame length shortens with the increase of hydrogen proportion and the combustion remains stable when the hydrogen proportion is equal to or less than 25%. With increasing hydrogen proportion the measured heat inputs of the three types of domestic gas stoves decrease gradually and the average thermal efficiency of TRPGS and SSPGS increase by 0.82% and 1.18% respectively. In addition the average efficiency of the RPMGS first increases by 1.35% under a hydrogen proportion of 15% and then decreases by 1.36% under a hydrogen proportion of 25%. In terms of flue gas emission CO emission reduces significantly with increasing hydrogen proportion while NOX emissions remain almost unchanged.
Hydrogen Strategy Update to the Market: December 2022
Dec 2022
Publication
The Government is committed to developing the UK’s low carbon hydrogen economy: hydrogen is considered critical to delivering energy security and our decarbonisation targets and presents a significant growth opportunity. It can play a pivotal role in our transition to a future based on renewable and nuclear energy while ensuring that natural gas used during this transition is from reliable sources including our own North Sea production and can provide clean energy for use in industry power transport and potentially home heating. In the UK Hydrogen Strategy we included the commitment to regularly summarise our policy development to keep industry apprised. Since publication of the Hydrogen Strategy we have doubled our low carbon hydrogen production capacity ambition to up to 10GW by 2030 (with at least half from electrolytic hydrogen) in the British Energy Security Strategy provided greater clarity to investors through the Hydrogen Investment Package and made substantial policy and funding strides across the hydrogen value chain. We summarised these ambitions commitments and actions in the first Hydrogen Strategy update to the market in July 2022. This was published alongside other key elements of our policy support which also included the launch of the first Electrolytic Hydrogen Allocation Round – offering joint Net Zero Hydrogen Fund (NZHF) and Hydrogen Production Business Model (HPBM) support – and our Hydrogen Sector Development Action Plan and the appointment of a UK Hydrogen Champion. Hydrogen is closely integrated into Government’s wider policy development on energy security and the energy transition both domestically and internationally with hydrogen policy previously announced through the Net Zero Strategy and the Breakthrough Agenda at COP26. This December 2022 Hydrogen Strategy update to the market summarises the extensive activity across Government since July to develop new hydrogen policy at pace and to design and deliver funding support. This includes announcements on shortlisted hydrogen projects in the Cluster Sequencing Process the launch of a consultation on hydrogen transport and storage (T&S) infrastructure the publication of the HPBM Heads of Terms and an update on the ongoing first Electrolytic Hydrogen Allocation Round. The hydrogen policy development presented here underlines the Government’s approach to promote every aspect of the UK hydrogen economy in collaboration with industry investors and international partners to create a strong globally competitive UK hydrogen sector.
Investigations on Pressure Dependence of Coriolis Mass Flow Meters Used at Hydrogen Refueling Stations
Sep 2020
Publication
In the framework of the ongoing EMPIR JRP 16ENG01 ‘‘Metrology for Hydrogen Vehicles’’ a main task is to investigate the influence of pressure on the measurement accuracy of Coriolis Mass Flow Meters (CFM) used at Hydrogen Refueling Stations (HRS). At a HRS hydrogen is transferred at very high and changing pressures with simultaneously varying flow rates and temperatures. It is clearly very difficult for CFMs to achieve the current legal requirements with respect to mass flow measurement accuracy at these measurement conditions. As a result of the very dynamic filling process it was observed that the accuracy of mass flow measurement at different pressure ranges is not sufficient. At higher pressures it was found that particularly short refueling times cause significant measurement deviations. On this background it may be concluded that pressure has a great impact on the accuracy of mass flow measurement. To gain a deeper understanding of this matter RISE has built a unique high-pressure test facility. With the aid of this newly developed test rig it is possible to calibrate CFMs over a wide pressure and flow range with water or base oils as test medium. The test rig allows calibration measurements under the conditions prevailing at a 70 MPa HRS regarding mass flows (up to 3.6 kg min−1) and pressures (up to 87.5 MPa).
Milford Haven: Energy Kingdom - System Architecture Report: A Prospering from the Energy Revolution Project
Nov 2021
Publication
Milford Haven: Energy Kingdom is a two-year project exploring what a decarbonised smart local energy system could look like for Milford Haven Pembroke and Pembroke Dock.
The project explores the potential of hydrogen as part of a multi-vector approach to decarbonisation. Central to the project and to achieving Net Zero is a commitment to engage with the community and local industry providing insight and opportunities for growth.
The ambition is to gather detailed insight into the whole energy system around Milford Haven to identify and design a future smart local energy system based on a truly multi-vector approach and comprehensive energy systems architecture.
The transition to Net Zero requires action across the economy. As the UK’s largest energy port Milford Haven is an industrial cluster that can handle 30% of total UK gas demand is home to Europe’s largest gas power station powering 3.5 million homes and businesses has ambitions to build 90MW of floating offshore wind supports 5000 jobs and injects £324m to the Pembrokeshire economy.
This work describes the outcomes of the effort to define designs of future energy system architectures combining; technology the interconnectivity between them and data; with markets trading platforms and policies; with business models and defined organisational governance. The aim of these designs is to provide:
The project explores the potential of hydrogen as part of a multi-vector approach to decarbonisation. Central to the project and to achieving Net Zero is a commitment to engage with the community and local industry providing insight and opportunities for growth.
The ambition is to gather detailed insight into the whole energy system around Milford Haven to identify and design a future smart local energy system based on a truly multi-vector approach and comprehensive energy systems architecture.
The transition to Net Zero requires action across the economy. As the UK’s largest energy port Milford Haven is an industrial cluster that can handle 30% of total UK gas demand is home to Europe’s largest gas power station powering 3.5 million homes and businesses has ambitions to build 90MW of floating offshore wind supports 5000 jobs and injects £324m to the Pembrokeshire economy.
This work describes the outcomes of the effort to define designs of future energy system architectures combining; technology the interconnectivity between them and data; with markets trading platforms and policies; with business models and defined organisational governance. The aim of these designs is to provide:
- The basis for a roadmap for the next phases of development and implementation
- Confidence to innovators and investors in the future longevity of investments in hydrogen and
- A common basis of understanding for all stakeholders wishing to contribute to the Milford Haven: Energy Kingdom.
PEMFC Poly-Generation Systems: Developments, Merits, and Challenges
Oct 2021
Publication
Significant research efforts are directed towards finding new ways to reduce the cost increase efficiency and decrease the environmental impact of power-generation systems. The poly-generation concept is a promising strategy that enables the development of a sustainable power system. Over the past few years the Proton Exchange Membrane Fuel Cell-based Poly-Generation Systems (PEMFC-PGSs) have received accelerated developments due to the low-temperature operation high efficiency and low environmental impact. This paper provides a comprehensive review of the main PEMFC-PGSs including Combined Heat and Power (CHP) co-generation systems Combined Cooling and Power (CCP) co-generation systems Combined Cooling Heat and Power (CCHP) tri-generation systems and Combined Water and Power (CWP) co-generation systems. First the main technologies used in PEMFC-PGSs such as those related to hydrogen production energy storage and Waste Heat Recovery (WHR) etc. are detailed. Then the research progresses on the economic energy and environmental performance of the different PEMFC-PGSs are presented. Also the recent commercialization activities on these systems are highlighted focusing on the leading countries in this field. Furthermore the remaining economic and technical obstacles of these systems along with the future research directions to mitigate them are discussed. The review reveals the potential of the PEMFC-PGS in securing a sustainable future of the power systems. However many economic and technical issues particularly those related to high cost and degradation rate still need to be addressed before unlocking the full benefits of such systems.
Hydrogen Supply Chain and Refuelling Network Design: Assessment of Alternative Scenarios for the Long-haul Road Freight in the UK
Mar 2023
Publication
Shifting from fossil fuels to clean alternative fuel options such as hydrogen is an essential step in decarbonising the road freight transport sector and facilitating an efficient transition towards zero-emissions goods distribution of the future. Designing an economically viable and competitive Hydrogen Supply Chain (HSC) to support and accelerate the widespread adoption of hydrogen powered Heavy Goods Vehicles (H2-HGVs) is however significantly hindered by the lack of the infrastructure required for producing storing transporting and distributing the required hydrogen. This paper focuses on a bespoke design of a hydrogen supply chain and distribution network for the long-haul road freight transportation in the UK and develops an improved end-to-end and spatially-explicit optimisation tool to perform scenario analysis and provide important first-hand managerial and policy making insights. The proposed methodology improves over existing grid-based methodologies by incorporating spatially-explicit locations of Hydrogen Refuelling Stations (HRSs) and allowing further flexibility and accuracy. Another distinctive feature of the method and the analyses carried out in the paper pertains to the inclusion of bulk geographically agnostic as well as geological underground hydrogen storage options and reporting on significant cost saving opportunities. Finally the curve for H2-HGVs penetration levels safety stock period decisions and the transport mode capacity against hydrogen levelized cost at pump have been generated as important policy making tools to provide decision support and insights into cost resilience and reliability of the HSC.
Policy and Pricing Barriers to Steel Industry Decarbonisation: A UK Case Study
Aug 2022
Publication
Global climate targets have highlighted the need for a whole-systems approach to decarbonisation one that includes targeted national policy and industry specific change. Situated within this context this research examines policy and pricing barriers to decarbonisation of the UK steel industry. Here the techno-economic modelling of UK green steelmaking provides a technical contribution to analysis of pricing barriers and policy solutions to these barriers in the UK specifically but also to the broader industrial decarbonisation literature. Estimated costs and associated emissions projections reveal relevant opportunities for UK steel in contributing to national climate and emissions targets. Modelling demonstrates that green steelmaking options have been put at price disadvantages compared to emissions-intensive incumbents and that fossil-free hydrogen-based steel-making has lower emissions and lower levelised costs than carbon capture and storage options including top gas recycling blast furnace (TGR-BF) with CCS and HIsarna smelter with CCS. Two primary policy recommendations are made: the removal of carbon pricing discrepancies and reductions in industrial electricity prices that would level the playing field for green steel producers in the UK. The research also provides relevant policy considerations for the international community in other industrial decarbonisation efforts and the policies that must accompany these decarbonisation choices.
Impact of Local Emergency Demand Response Programs on the Operation of Electricity and Gas Systems
Mar 2022
Publication
With increasing attention to climate change the penetration level of renewable energy sources (RES) in the electricity network is increasing. Due to the intermittency of RES gas‐fired power plants could play a significant role in backing up the RES in order to maintain the supply– demand balance. As a result the interaction between gas and power networks are significantly in‐ creasing. On the other hand due to the increase in peak demand (e.g. electrification of heat) net‐ work operators are willing to execute demand response programs (DRPs) to improve congestion management and reduce costs. In this context modeling and optimal implementation of DRPs in proportion to the demand is one of the main issues for gas and power network operators. In this paper an emergency demand response program (EDRP) is implemented locally to reduce the con‐ gestion of transmission lines and gas pipelines more efficiently. Additionally the effects of optimal implementation of local emergency demand response program (LEDRP) in gas and power networks using linear and non‐linear economic models (power exponential and logarithmic) for EDRP in terms of cost and line congestion and risk of unserved demand are investigated. The most reliable demand response model is the approach that has the least difference between the estimated demand and the actual demand. Furthermore the role of the LEDRP in the case of hydrogen injection instead of natural gas in the gas infrastructure is investigated. The optimal incentives for each bus or node are determined based on the power transfer distribution factor gas transfer distribution factor available electricity or gas transmission capability and combination of unit commitment with the LEDRP in the integrated operation of these networks. According to the results implementing the LEDRP in gas and power networks reduces the total operation cost up to 11% and could facilitate hydrogen injection to the network. The proposed hybrid model is implemented on a 24‐bus IEEE electricity network and a 15‐bus gas network to quantify the role and value of different LEDRP models.
Progress in Electrical Energy Storage System: A Critical Review
Jan 2009
Publication
Electrical energy storage technologies for stationary applications are reviewed. Particular attention is paid to pumped hydroelectric storage compressed air energy storage battery flow battery fuel cell solar fuel superconducting magnetic energy storage flywheel capacitor/supercapacitor and thermal energy storage. Comparison is made among these technologies in terms of technical characteristics applications and deployment status.
Batteries, Fuel Cells, or Engines? A Probabilistic Economic and Environmental Assessment of Electricity and Electrofuels for Heavy Goods Vehicles
Oct 2022
Publication
Uncertainty surrounding the total cost of ownership system costs and life cycle environmental impacts means that stakeholders may lack the required information to evaluate the risks of transitioning to low-carbon fuels and powertrains. This paper assesses the life cycle costs and well-to-wheel environmental impacts of using electricity and electrofuels in Heavy Good Vehicles (HGVs) whilst considering input parameter uncertainty. The complex relationship between electricity cost electrolyser capacity factor CO2 capture cost and electricity emissions intensity is assessed within a Monte Carlo based framework to identify scenarios where use of electricity or electrofuels in heavy goods vehicles makes economic and environmental sense. For vehicles with a range of less than 450 km battery electric vehicles achieve the lowest total cost of ownership for an electricity cost less than 100 €/MWh. For vehicles that require a range of up to 900 km hydrogen fuel cell vehicles represent the lowest long-term cost of abatement. Power-to-methane and power-to-liquid scenarios become economically competitive when low-cost electricity is available at high-capacity factors and CO2 capture costs for fuel synthesis are below 100 €/tCO2; these fuels may be more applicable to decarbonise shipping and aviation. Battery electric HGVs reduce greenhouse gas emissions by 50% compared to the diesel baseline with electricity emissions of 350 gCO2e/kWh. Electricity emissions less than 35 gCO2e/kWh are required for the power-to-methane and power-to-liquid scenarios to meet EU emissions savings criteria. High vehicle capital costs and a lack of widespread refuelling infrastructure may hinder initial uptake of low-carbon fuels and powertrains for HGVs.
Delivering a Reliable Decarbonised Power System
Mar 2023
Publication
This report illustrates what a reliable resilient decarbonised electricity supply system could look like in 2035 and the steps required to achieve it. It provides new insights and new advice on how such a system can be achieved by 2035 using real weather data and hourly analysis of Great Britain’s power system (Northern Ireland is part of the all-Ireland system). It also looks at the implications for hydrogen.
Spontaneous Ignition of Cryo-Compressed Hydrogen in a T-Shaped Channel System
Aug 2022
Publication
Sudden releases of pressurised hydrogen may spontaneously ignite by the so-called “diffusion ignition” mechanism. Several experimental and numerical studies have been performed on spontaneous ignition for compressed hydrogen at ambient temperature. However there is no knowledge of the phenomenon for compressed hydrogen at cryogenic temperatures. The study aims to close this knowledge gap by performing numerical experiments using a computational fluid dynamics model validated previously against experiments at atmospheric temperatures to assess the effect of temperature decrease from ambient 300 K to cryogenic 80 K. The ignition dynamics is analysed for a T-shaped channel system. The cryo-compressed hydrogen is initially separated from the air in the T-shaped channel system by a burst disk (diaphragm). The inertia of the burst disk is accounted for in the simulations. The numerical experiments were carried out to determine the hydrogen storage pressure limit leading to spontaneous ignition in the configuration under investigation. It is found that the pressure limit for spontaneous ignition of the cryo-compressed hydrogen at temperature 80 K is 9.4 MPa. This is more than 3 times larger than pressure limit for spontaneous ignition of 2.9 MPa in the same setup at ambient temperature of 300 K.
Hydrogenerally - Episode 6: Waste to Hydrogen
Nov 2022
Publication
In this sixth episode Steffan Eldred Hydrogen Innovation Network Knowledge Transfer Manager and Debra Jones Chemistry Knowledge Transfer Manager from Innovate UK KTN discuss why converting waste to hydrogen is so important and explore the hydrogen transition opportunities and challenges in this sector alongside their special guest Rob Dent Senior Research Engineer - Energy Linde and Application Sales Engineer at BOC UK & Ireland.
The podcast can be found on their website.
The podcast can be found on their website.
The Evolution and Structure of Ignited High-pressure Cryogenic Hydrogen Jets
Jun 2022
Publication
The anticipated upscaling of hydrogen energy applications will involve the storage and transport of hydrogen at cryogenic conditions. Understanding the potential hazard arising from leaks in high-pressure cryogenic storage is needed to improve hydrogen safety. The manuscript reports a series of numerical simulations with detailed chemistry for the transient evolution of ignited high-pressure cryogenic hydrogen jets. The study aims to gain insight of the ignition processes flame structures and dynamics associated with the transient flame evolution. Numerical simulations were firstly conducted for an unignited jet released under the same cryogenic temperature of 80 K and pressure of 200 bar as the considered ignited jets. The predicted hydrogen concentrations were found to be in good agreement with the experimental measurements. The results informed the subsequent simulations of the ignited jets involving four different ignition locations. The predicted time series snapshots of temperature hydrogen mass fraction and the flame index are analyzed to study the transient evolution and structure of the flame. The results show that a diffusion combustion layer is developed along the outer boundary of the jet and a side diffusion flame is formed for the near-field ignition. For the far-field ignition an envelope flame is observed. The flame structure contains a diffusion flame on the outer edge and a premixed flame inside the jet. Due to the complex interactions between turbulence fuel-air mixing at cryogenic temperature and chemical reactions localized spontaneous ignition and transient flame extinguishment are observed. The predictions also captured the experimentally observed deflagration waves in the far-field ignited jets.
Quantitative Risk Assessment Methodology for Hydrogen Tank Rupture in a Tunnel Fire
Dec 2022
Publication
This study presents a methodology of a quantitative risk assessment for the scenario of an onboard hydrogen storage tank rupture and tunnel fire incident. The application of the methodology is demonstrated on a road tunnel. The consequence analysis is carried out for the rupture of a 70 MPa 62.4-litre hydrogen storage tank in a fire that has a thermally activated pressure relief device (TPRD) failed or blocked during an incident. Scenarios with two states of charge (SoC) of the tank i.e. SoC = 99% and SoC = 59% are investigated. The risks in terms of fatalities per vehicle per year and the cost per incident are assessed. It is found that for the reduction in the risk with the hydrogen-powered vehicle in a road tunnel fire incident to the acceptable level of 10−5 fatality/vehicle/year the fireresistance rating (FRR) of the hydrogen storage tank should exceed 84 min. The FRR increase to this level reduces the societal risk to an acceptable level. The increase in the FRR to 91 min reduces the risk in terms of the cost of the incident to GBP 300 following the threshold cost of minor injury published by the UK Health and Safety Executive. The Frequency–Number (F–N) of the fatalities curve is developed to demonstrate the effect of mitigation measures on the risk reduction to socially acceptable levels. The performed sensitivity study confirms that with the broad range of input parameters including the fire brigade response time the risk of rupture of standard hydrogen tank-TPRD systems inside the road tunnel is unacceptable. One of the solutions enabling an inherently safer use of hydrogen-powered vehicles in tunnels is the implementation of breakthrough safety technology—the explosion free in a fire self-venting (TPRD-less) tanks.
Towards a 100% Hydrogen Domestic Gas Network: Regulatory and Commercial Barriers to the First Demonstrator Project in the United Kingdom
May 2022
Publication
In the debate on the decarbonisation of heat renewable electricity tends to play a much more dominant role than green gases despite the potential advantages of gas in terms of utilising existing transportation networks and end-use appliances. Informed comparisons are hampered by information asymmetry; the renewable electricity has seen a huge grid level deployment whereas low-carbon hydrogen or bio-methane have been limited to some small stand-alone trials. This paper explores the regulatory and commercial challenges of implementing the first UK neighbourhood level 100% low-carbon hydrogen demonstration project. We draw on existing literature and action research to identify the key practical barriers currently hindering the ability of strategically important actors to accelerate the substitution of natural gas with low carbon hydrogen in local gas networks. This paper adds much needed contextual depth to existing generic and theoretical understandings of low-carbon hydrogen for heat transition feasibility. The learnings from pilot projects about the exclusion of hydrogen calorific value from the Local Distribution Zone calorific value calculation Special Purpose Vehicle companies holding of liability and future costs to consumers need to be quickly transferred into resilient operational practice or gas repurposing projects will continue to be less desirable than electrification using existing regulations and with more rapid delivery
Hydrogen Production in the Light of Sustainability: A Comparative Study on the Hydrogen Production Technologies Using the Sustainability Index Assessment Method
Sep 2021
Publication
Hydrogen as an environmentally friendly energy carrier has received special attention to solving uncertainty about the presence of renewable energy and its dependence on time and weather conditions. This material can be prepared from different sources and in various ways. In previous studies fossil fuels have been used in hydrogen production but due to several limitations especially the limitation of the access to this material in the not-too-distant future and the great problem of greenhouse gas emissions during hydrogen production methods. New methods based on renewable and green energy sources as energy drivers of hydrogen production have been considered. In these methods water or biomass materials are used as the raw material for hydrogen production. In this article after a brief review of different hydrogen production methods concerning the required raw material these methods are examined and ranked from different aspects of economic social environmental and energy and exergy analysis sustainability. In the following the current position of hydrogen production is discussed. Finally according to the introduced methods their advantages and disadvantages solar electrolysis as a method of hydrogen production on a small scale and hydrogen production by thermochemical method on a large scale are introduced as the preferred methods.
Mitigation of CO Poisoning Hazard in Malfunctioning Gas Appliances Through Use of Hydrogen Blended Gas
Sep 2021
Publication
The HyDeploy project [1] has undertaken an extensive research programme to assess safety and performance of the existing UK gas appliances population fueled with natural gas / hydrogen admixtures (hydrogen blended gas). The first stage of this work [2] focused on well maintained and normally functioning appliances. This work demonstrated that unmodified gas appliances can operate safely with hydrogen blended gas (up to 20 vol% hydrogen) and the key hazard areas of carbon monoxide (CO) production light back and flame out and the operation of flame failure devices are unaffected. It is widely recognized that due to aging and variable degrees of maintenance that the combustion performance of a gas appliance will depreciate over time. In extreme cases this can lead to situations where high levels of CO may be released back into the dwelling resulting in CO poisoning to the occupants. To obtain a universal appreciation of the effect of hydrogen addition on the safety and performance of all gas appliances operation under sub optimal conditions is required and therefore it is important that the operation of malfunctioning appliances fuelled with hydrogen blended gas is assessed. A review of failure modes identified six key scenarios where the composition of the fuel gas may lead to changes in safety performance - these primarily related to the resulting composition of the flue gas but also included delayed ignition. Gas appliance faults that will increase the CO production were tested through a series of experiments to simulate fault conditions and assess the effect of hydrogen blended gas. The fault modes examined included linting flame chilling incorrect appliance set up and modification of gas valve operation. The programme utilized six different appliances tested with three methane-hydrogen fuel blends (containing 0 20 and 28.4 vol% hydrogen). In all cases the switch to hydrogen blended gas reduced CO production. The change in CO production when using hydrogen blended gas is a consequence of a decrease in the theoretical air requirement to achieve complete combustion. In some cases the amount of CO produced was identical to the nonfault baseline performance on methane thereby fully mitigating the consequence of the malfunction. In the case of very high CO production a 90% reduction was recorded when using 20 vol% hydrogen blended gas. In situations such as non-optimal boiler set up the addition of hydrogen to the gas supply would prevent the production of high levels of CO. The findings here together with the results from HyDeploy 1 [2] indicate that the safety and performance of unmodified existing UK gas appliances are not detrimentally affected when using hydrogen blended gas. Furthermore the addition of hydrogen to the fuel gas has been shown to reduce CO production under fault conditions therefore the introduction of hydrogen into the gas network may serve to mitigate the hazard posed by existing faulty appliances that are producing elevated levels of CO.
Design of Gravimetric Primary Standards for Field-testing of Hydrogen Refuelling Stations
Apr 2020
Publication
The Federal Institute of Metrology METAS developed a Hydrogen Field Test Standard (HFTS) that can be used for field verification and calibration of hydrogen refuelling stations. The testing method is based on the gravimetric principle. The experimental design of the HFTS as well as the description of the method are presented here.
Hydrogen Strategy Update to the Market: July 2022
Jul 2022
Publication
Low carbon hydrogen is our new home-grown super-fuel which will be vital for our energy security and to meet our legally binding commitment to achieve net zero by 2050. The UK Hydrogen Strategy published in August 2021 outlined a comprehensive roadmap for the development of a thriving UK hydrogen economy over the coming decade. In the British Energy Security Strategy published in April this year the government doubled the UK’s hydrogen production ambition to up to 10GW by 2030. This increased ambition cements our place firmly at the forefront of the global race to develop hydrogen as a secure low carbon replacement for fossil fuels in the transition to greater energy security and net zero. Since the publication of the UK Hydrogen Strategy we have continued to deliver on our commitments setting out new policy and funding for hydrogen across the value chain and bringing together the international community around shared hydrogen objectives to rapidly develop a global hydrogen economy. Hydrogen was a key component of the Net Zero Strategy COP26 and the British Energy Security Strategy. The Hydrogen Investment Package and opening of the £240 million Net Zero Hydrogen Fund in April marked a major step forward in delivering government support to drive further private investment into hydrogen production in the UK. To keep industry informed on the government’s ongoing work to develop the hydrogen economy we committed in the UK Hydrogen Strategy to producing regular updates to the market as our policy develops. In addition to offering an accessible ‘one stop shop’ of government policy development and support schemes these updates will provide industry and investors with further clarity on the direction of travel of hydrogen policy across the value chain so that government and industry can work together most effectively and with the necessary pace to build a world-leading low carbon hydrogen sector in the UK.
Prospects of Integrated Photovoltaic‐Fuel Cell Systems in a Hydrogen Economy: A Comprehensive Review
Oct 2021
Publication
Integrated photovoltaic‐fuel cell (IPVFC) systems amongst other integrated energy generation methodologies are renewable and clean energy technologies that have received diverse re‐ search and development attentions over the last few decades due to their potential applications in a hydrogen economy. This article systematically updates the state‐of‐the‐art of IPVFC systems and provides critical insights into the research and development gaps needed to be filled/addressed to advance these systems towards full commercialization. Design methodologies renewable energy‐ based microgrid and off‐grid applications energy management strategies optimizations and the prospects as self‐sustaining power sources were covered. IPVFC systems could play an important role in the upcoming hydrogen economy since they depend on solar hydrogen which has almost zero emissions during operation. Highlighted herein are the advances as well as the technical challenges to be surmounted to realize numerous potential applications of IPVFC systems in unmanned aerial vehicles hybrid electric vehicles agricultural applications telecommunications desalination synthesis of ammonia boats buildings and distributed microgrid applications.
Feasibility of Hydrogen Production from Steam Reforming of Biodiesel (FAME) Feedstock on Ni-supported Catalysts
Jan 2015
Publication
The catalytic steam reforming of biodiesel was examined over Ni-alumina and Ni–ceria–zirconia catalysts at atmospheric pressure. Effects of temperatures of biodiesel preheating/vaporising (190–365 ◦C) and reforming (600–800 ◦C) molar steam to carbon ratio (S/C = 2–3) and residence time in the reformer represented by the weight hourly space velocity ‘WHSV’ of around 3 were examined for 2 h. Ni supported on calcium aluminate and on ceria–zirconia supports achieved steady state hydrogen product stream within 90% of the equilibrium yields although 4% and 1% of the carbon feed had deposited on the catalysts respectively during the combined conditions of start-up and steady state. Addition of dopants to ceria–zirconia supported catalyst decreased the performance of the catalyst. Increase in S/C ratio had the expected positive effects of higher H2 yield and lower carbon deposition.
Facile Synthesis of Palladium Phosphide Electrocatalysts and their Activity for the Hydrogen Oxidation, Hydrogen Evolutions, Oxygen Reduction and Formic Acid Oxidation Reactions
Nov 2015
Publication
We demonstrate a new approach for producing highly dispersed supported metal phosphide powders with small particle size improved stability and increased electrocatalytic activity towards some useful reactions. The approach involves a one-step conversion of metal supported on high surface area carbon to the metal phosphide utilising a very simple and scalable synthetic process. We use this approach to produce PdP2 and Pd5P2 particles dispersed on carbon with a particle size of 4.5–5.5 nm by converting a commercially available Pd/C powder. The metal phosphide catalysts were tested for the oxygen reduction hydrogen oxidation and evolution and formic acid oxidation reactions. Compared to the unconverted Pd/C material we find that alloying the P at different levels shifts oxide formation on the Pd to higher potentials leading to greater stability during cycling studies (20% more ECSA retained 5k cycles) and in thermal treatment under air. Hydrogen absorption within the PdP2 and Pd5P2 particles is enhanced. The phosphides compare favourably to the most active catalysts reported to date for formic acid oxidation especially PdP2 and there is a significant decrease in poisoning of the surface compared to Pd alone. The mechanistic changes in the reactions studied are rationalised in terms of increased water activation on the surface phosphorus atoms of the catalyst. One of the catalysts PdP2/C is tested in a fuel cell as anode and cathode catalyst and shows good performance.
Materials for Hydrogen-based Energy Storage - Past, Recent Progress and Future Outlook
Dec 2019
Publication
Michael Hirscher,
Volodymyr A. Yartys,
Marcello Baricco,
José Bellosta von Colbe,
Didier Blanchard,
Robert C. Bowman Jr.,
Darren P. Broom,
Craig Buckley,
Fei Chang,
Ping Chen,
Young Whan Cho,
Jean-Claude Crivello,
Fermin Cuevas,
William I. F. David,
Petra E. de Jongh,
Roman V. Denys,
Martin Dornheim,
Michael Felderhoff,
Yaroslav Filinchuk,
George E. Froudakis,
David M. Grant,
Evan MacA. Gray,
Bjørn Christian Hauback,
Teng He,
Terry D. Humphries,
Torben R. Jensen,
Sangryun Kim,
Yoshitsugu Kojima,
Michel Latroche,
Hai-wen Li,
Mykhaylo V. Lototskyy,
Joshua W. Makepeace,
Kasper T. Møller,
Lubna Naheed,
Peter Ngene,
Dag Noreus,
Magnus Moe Nygård,
Shin-ichi Orimo,
Mark Paskevicius,
Luca Pasquini,
Dorthe B. Ravnsbæk,
M. Veronica Sofianos,
Terrence J. Udovic,
Tejs Vegge,
Gavin Walker,
Colin Webb,
Claudia Weidenthaler and
Claudia Zlotea
Globally the accelerating use of renewable energy sources enabled by increased efficiencies and reduced costs and driven by the need to mitigate the effects of climate change has significantly increased research in the areas of renewable energy production storage distribution and end-use. Central to this discussion is the use of hydrogen as a clean efficient energy vector for energy storage. This review by experts of Task 32 “Hydrogen-based Energy Storage” of the International Energy Agency Hydrogen TCP reports on the development over the last 6 years of hydrogen storage materials methods and techniques including electrochemical and thermal storage systems. An overview is given on the background to the various methods the current state of development and the future prospects. The following areas are covered; porous materials liquid hydrogen carriers complex hydrides intermetallic hydrides electro-chemical storage of energy thermal energy storage hydrogen energy systems and an outlook is presented for future prospects and research on hydrogen-based energy storage
Spatially Resolved Model for Studying Decarbonisation Pathways for Heat Supply and Infrastructure Trade-offs
Jun 2017
Publication
Heat decarbonisation is one of the main challenges of energy system decarbonisation. However existing energy planning models struggle to compare heat decarbonisation approaches because they rarely capture trade-offs between heat supply end-use technologies and network infrastructure at sufficient spatial resolution. A new optimisation model is presented that addresses this by including trade-offs between gas electricity and heat infrastructure together with related supply and end-use technologies with high spatial granularity. The model is applied in case studies for the UK. For the case modelled it is shown that electrification of heat is most cost-effective via district level heat pumps that supply heat networks instead of individual building heat pumps. This is because the cost of reinforcing the electricity grid for installing individual heat pumps does not sufficiently offset heat infrastructure costs. This demonstrates the importance of considering infrastructure trade-offs. When modelling the utilisation of a decarbonised gas the penetration of heat networks and location of district level heat supply technologies was shown to be dependent on linear heat density and on zone topology. This shows the importance of spatial aspects. Scenario-specific linear heat density thresholds for heat network penetration were identified. For the base case penetration of high temperature heat networks was over 50% and 60% by 2050 for linear heat densities over 1500 and 2500 kWh/m. For the case when medium heat temperature networks were additionally available a mix of both networks was observed. Medium temperature heat network penetration was over 20% 30% and 40% for linear heat densities of over 1500 2500 and 3000 kWh/m while high temperature heat network penetration was over 20% and 30% for linear heat densities of under 2000 and 1500 kWh/m respectively.
Financing Efficiency Evaluation and Influencing Factors of Hydrogen Energy Listed Enterprises in China
Jan 2022
Publication
Existing studies of financing efficiency concentrate on capital structure and a single external environment or internal management characteristic. Few of the studies include the internal and external financing environments at the same time for hydrogen energy industry financing efficiency. This paper used the data envelopment analysis (DEA) model and the Malmquist index to measure the financing efficiency of 70 hydrogen energy listed enterprises in China from 2014 to 2020 from both static and dynamic perspectives. Then a tobit model was constructed to explore the influence of external environment and internal factors on the financing efficiency. The contributions of this paper are studying the internal and external financing environments and integrating financing cost efficiency and capital allocation efficiency into the financing efficiency of hydrogen energy enterprises. The results show that firstly the financing efficiency of China’s hydrogen energy listed enterprises showed an upward trend during the years 2014–2020. Secondly China’s hydrogen energy enterprises mainly gather in the eastern coastal areas and their financing efficiency is more than that in western areas. Thirdly the regional economic development level enterprise scale financing structure capital utilization efficiency and profitability have significant effects on the financing efficiency. These results can promote the achievement of “carbon neutrality” in China.
Economic Dispatch Model of Nuclear High-Temperature Reactor with Hydrogen Cogeneration in Electricity Market
Dec 2021
Publication
Hydrogen produced without carbon emissions could be a useful fuel as nations look to decarbonize their electricity transport and industry sectors. Using the iodine–sulfur (IS) cycle coupled with a nuclear heat source is one method for producing hydrogen without the use of fossil fuels. An economic dispatch model was developed for a nuclear-driven IS system to determine hydrogen sale prices that would make such a system profitable. The system studied is the HTTR GT/H2 a design for power and hydrogen cogeneration at the Japan Atomic Energy Agency’s High Temperature Engineering Test Reactor. This study focuses on the development of the economic model and the role that input data plays in the final calculated values. Using a historical price duration curve shows that the levelized cost of hydrogen (LCOH) or breakeven sale price of hydrogen would need to be 98.1 JPY/m3 or greater. Synthetic time histories were also used and found the LCOH to be 67.5 JPY/m3 . The price duration input was found to have a significant effect on the LCOH. As such great care should be used in these economic dispatch analyses to select reasonable input assumptions.
Integrating Housing Stock and Energy System Models as a Strategy to Improve Heat Decarbonisation Assessments
Aug 2014
Publication
The UK government heat strategy is partially based on decarbonisation pathways from the UK MARKAL energy system model. We review how heat provision is represented in UK MARKAL identifying a number of shortcomings and areas for improvement. We present a completely revised model with improved estimations of future heat demands and a consistent representation of all heat generation technologies. This model represents all heat delivery infrastructure for the first time and uses dynamic growth constraints to improve the modelling of transitions according to innovation theory. Our revised model incorporates a simplified housing stock model which is used produce highly-refined decarbonisation pathways for residential heat provision. We compare this disaggregated model against an aggregated equivalent which is similar to the existing approach in UK MARKAL. Disaggregating does not greatly change the total residential fuel consumption in two scenarios so the benefits of disaggregation will likely be limited if the focus of a study is elsewhere. Yet for studies of residential heat disaggregation enables us to vary consumer behaviour and government policies on different house types as well as highlighting different technology trends across the stock in comparison with previous aggregated versions of the model.
Consumer Perceptions of Blended Hydrogen in the Home: Learning from HyDeploy
Apr 2022
Publication
This report presents the results of research into consumer perceptions and the subsequent degree of acceptance of blended hydrogen in domestic properties. Evidence from two trial sites of the HyDeploy programme: i) a private site trial at Keele University North Staffordshire; ii) and a public site trial at Winlaton Gateshead are discussed.
Modelling of Ventilated Hydrogen Dispersion in Presence of Co-flow and Counter-flow
Sep 2021
Publication
In the framework of the EU-funded project HyTunnel-CS an inter-comparison among partners CFD simulations has been carried out. The simulations are based on experiments conducted within the project by Pro-Science and involve hydrogen release inside a safety vessel testing different ventilation configurations. The different ventilation configurations that were tested are co-flow counter-flow and cross-flow. In the current study co-flow and counter-flow tests along with the no ventilation test (m' = S g/s d = 4 mm ) are simulated with the aim to validate available and well-known CFD codes against such applications and to provide recommendations on modeling strategies. Special focus is given on modeling the velocity field produced by the fan during the experiments. The computational results are compared with the experimental results and a discussion follows regarding the efficiency of each ventilation configuration.
Study of Activity and Super-Capacitance Exhibited by Bifunctional Raney 2.0 Catalyst for Alkaline Water-Splitting Electrolysis
Dec 2020
Publication
Low-cost high-performance coatings for hydrogen production via electrolytic water-splitting are of great importance for de-carbonising energy. In this study the Raney2.0 coating was analysed using various electrochemical techniques to assess its absolute performance and it was confirmed to have an extremely low overpotential for hydrogen evolution of just 28 mV at 10 mA/cm2. It was also confirmed to be an acceptable catalyst for oxygen evolution making it the highest performing simple bifunctional electrocatalyst known. The coating exhibits an extremely high capacitance of up to 1.7 F/cm2 as well as being able to store 0.61 J/cm2 in the form of temporary hydride deposits. A new technique is presented that performs a best-fit of a transient simulation of an equivalent circuit containing a constant phase element to cyclic voltammetry measurements. From this the roughness factor of the coating was calculated to be approximately 40000 which is the highest figure ever reported for this type of material. The coating is therefore an extremely useful improved bifunctional coating for the continued roll-out of alkaline electrolysis for large-scale renewable energy capture via hydrogen production.
Future Electricity Series Part 2 - Power from Renewables
Sep 2013
Publication
The independent cross-party report highlights a ‘sensible middle ground’ in the renewables debate and calls for more effort in building cross-party consensus. It finds that the UK has only just begun to harness low carbon renewable resources bigger than North Sea oil and gas and argues that the Government could do more to narrow the scope of debate about the technology mix beyond 2020. It argues that it should work with industry and academia first to establish ‘low regrets’ levels of technology deployment and second to ensure that policies are in place to incentivise investments such as supply chain investment needed to deliver these low regrets actions.
This approach would help provide the longer term clarity that could secure supply chain investments giving the UK a head-start in the global race. The report finds that these investments could be missed delayed or more expensive if there is insufficient confidence about long term demand for key technologies such as offshore wind. Work by Government to help incentivise these investments would increase the likelihood that technology cost reductions are achieved and help mitigate against high costs if new nuclear or carbon capture and storage development fail or are delayed.
On affordability the report finds that there are ‘hidden’ benefits that the UK could see from investing more in renewables through electricity bills between now and 2020. These include: avoiding bill increases driven by fossil fuels; making electricity bills more predictable; and providing an economic boost. The extra money paid to support renewables and other low carbon generation such as nuclear power could be more than offset by energy efficiency savings although Government needs to do more to show how these savings will arise.
On sustainability the report tackles myths about the carbon emitted in manufacturing renewable technologies or in backing up varying technologies such as wind solar wave and tidal. It finds that even when considering these factors renewables are still amongst the most low carbon options. The report also looks at the sustainability of electricity from biomass. Bioenergy overall could provide up to ten per cent of energy and reduce the cost of cutting carbon by £44 billion per year in 2050. The Government’s new biomass policies are a pragmatic response to concerns about the sustainability of biomass power which balances protecting the environment building public confidence and enabling the sector to grow.
On security of supply the inquiry argues that debate should focus on the whole electricity system and that individual technologies should be considered in the context of how they add to or reduce system risks. Considered like this renewables reduce some risks such as fuel supply risks which caused concern last winter and add to others such as system balancing risks. System balancing risks from varying renewables (wind solar wave and tidal technologies) are manageable using a number of existing and developing technologies.
The independent report chaired by former Energy Minister Charles Hendry MP and Shadow Energy Minister Baroness Worthington was compiled between May and September 2013 and was sponsored by Siemens and DONG Energy. It is part of a year-long independent and cross party inquiry into the UK power sector the Future Electricity Series sponsored by the Institution of Gas Engineers and Managers.
Link to Launch Video
This approach would help provide the longer term clarity that could secure supply chain investments giving the UK a head-start in the global race. The report finds that these investments could be missed delayed or more expensive if there is insufficient confidence about long term demand for key technologies such as offshore wind. Work by Government to help incentivise these investments would increase the likelihood that technology cost reductions are achieved and help mitigate against high costs if new nuclear or carbon capture and storage development fail or are delayed.
On affordability the report finds that there are ‘hidden’ benefits that the UK could see from investing more in renewables through electricity bills between now and 2020. These include: avoiding bill increases driven by fossil fuels; making electricity bills more predictable; and providing an economic boost. The extra money paid to support renewables and other low carbon generation such as nuclear power could be more than offset by energy efficiency savings although Government needs to do more to show how these savings will arise.
On sustainability the report tackles myths about the carbon emitted in manufacturing renewable technologies or in backing up varying technologies such as wind solar wave and tidal. It finds that even when considering these factors renewables are still amongst the most low carbon options. The report also looks at the sustainability of electricity from biomass. Bioenergy overall could provide up to ten per cent of energy and reduce the cost of cutting carbon by £44 billion per year in 2050. The Government’s new biomass policies are a pragmatic response to concerns about the sustainability of biomass power which balances protecting the environment building public confidence and enabling the sector to grow.
On security of supply the inquiry argues that debate should focus on the whole electricity system and that individual technologies should be considered in the context of how they add to or reduce system risks. Considered like this renewables reduce some risks such as fuel supply risks which caused concern last winter and add to others such as system balancing risks. System balancing risks from varying renewables (wind solar wave and tidal technologies) are manageable using a number of existing and developing technologies.
The independent report chaired by former Energy Minister Charles Hendry MP and Shadow Energy Minister Baroness Worthington was compiled between May and September 2013 and was sponsored by Siemens and DONG Energy. It is part of a year-long independent and cross party inquiry into the UK power sector the Future Electricity Series sponsored by the Institution of Gas Engineers and Managers.
Link to Launch Video
Performance Analysis of a Flexi-Fuel Turbine-Combined Free-Piston Engine Generator
Jul 2019
Publication
The turbine-combined free-piston engine generator (TCFPEG) is a hybrid machine generating both mechanical work from the gas turbine and electricity from the linear electric generator for battery charging. In the present study the system performance of the designed TCFPEG system is predicted using a validated numerical model. A parametric analysis is undertaken based on the influence of the engine load valve timing the number of linear generators adopted and different fuels on the system performance. It is found that when linear electric generators are connected with the free-piston gas turbine the bottom dead centre the peak piston velocity and engine operation frequency are all reduced. Very minimal difference on the in-cylinder pressure and the compressor pressure is observed while the peak pressure in the bounce chamber is reduced. When coupled with a linear electric generator the system efficiency can be improved to nearly 50% by optimising engine load and the number of the linear generators adopted in the TCFPEG system. The system is able to be operated with different fuels as the piston is not limited by a mechanical system; the output power and system efficiency are highest when hydrogen is used as the fuel.
A Critique on the UK's Net Zero Strategy
Dec 2022
Publication
Before the Covid-19 pandemic UK passed net-zero emission law legislation to become the first major economy in the world to end its contribution to global warming by 2050. Following the UK’s legislation to reach net-zero emissions a long-term strategy for transition to a net-zero target was published in 2021. The strategy is a technology-led and with a top-down approach. The intention is to reach the target over the next three decades. The document targets seven sectors to reduce emissions and include a wide range of policies and innovations for decarbonization. This paper aims to accomplish a much needed review of the strategy in heat and buildings part and cover the key related areas in future buildings standard heat pumps and use of hydrogen as elaborated in the strategy. For that purpose this research reviews key themes in the policy challenges recent advancement and future possibilities. It provides an insight on the overall development toward sustainability and decarbonization of built environment in the UK by 2050. A foresight model Future Wheels is also used to visualize the findings from the review and provide a clear picture of the potential impact of the policy.
Integrated Energy System Powered a Building in Sharjah Emirates in the United Arab Emirates
Jan 2023
Publication
In this study a green hydrogen system was studied to provide electricity for an office building in the Sharjah emirate in the United Arab Emirates. Using a solar PV a fuel cell a diesel generator and battery energy storage; a hybrid green hydrogen energy system was compared to a standard hybrid system (Solar PV a diesel generator and battery energy storage). The results show that both systems adequately provided the power needed for the load of the office building. The cost of the energy for both the basic and green hydrogen energy systems was 0.305 USD/kWh and 0.313 USD/kWh respectively. The cost of the energy for both systems is very similar even though the capital cost of the green hydrogen energy system was the highest value; however the replacement and operational costs of the basic system were higher in comparison to the green hydrogen energy system. Moreover the impact of the basic system in terms of the carbon footprint was more significant when compared with the green hydrogen system. The reduction in carbon dioxide was a 4.6 ratio when compared with the basic system.
HyDeploy2: Gas Characteristics Summary and Interpretation
Jun 2020
Publication
In order to inform the Quantified Risk Assessment (QRA) and procedures for the Winlaton trial the gas characteristics relating to the behaviour of the flammable gas have been reviewed for blended natural gas mixtures containing 20% mol/mol hydrogen (hereby referred to as “blend”) for normal operation and 50% mol/mol for fault conditions. This work builds on the findings of the previous HyDeploy gas characteristics report HyD-Rep04-V02-Characteristics.<br/>Click on the supplements tab to view the other documents from this report
Steady State Analysis of Gas Networks with Distributed Injection of Alternative Gas
Jun 2015
Publication
A steady state analysis method was developed for gas networks with distributed injection of alternative gas. A low pressure gas network was used to validate the method. Case studies were carried out with centralized and decentralized injection of hydrogen and upgraded biogas. Results show the impact of utilizing a diversity of gas supply sources on pressure distribution and gas quality in the network. It is shown that appropriate management of using a diversity of gas supply sources can support network management while reducing carbon emissions.
Technologies and Policies to Decarbonize Global Industry: Review and Assessment of Mitigation Drivers Through 2070
Mar 2020
Publication
Jeffrey Rissman,
Chris Bataille,
Eric Masanet,
Nate Aden,
William R. Morrow III,
Nan Zhou,
Neal Elliott,
Rebecca Dell,
Niko Heeren,
Brigitta Huckestein,
Joe Cresko,
Sabbie A. Miller,
Joyashree Roy,
Paul Fennell,
Betty Cremmins,
Thomas Koch Blank,
David Hone,
Ellen D. Williams,
Stephane de la Rue du Can,
Bill Sisson,
Mike Williams,
John Katzenberger,
Dallas Burtraw,
Girish Sethi,
He Ping,
David Danielson,
Hongyou Lu,
Tom Lorber,
Jens Dinkel and
Jonas Helseth
Fully decarbonizing global industry is essential to achieving climate stabilization and reaching net zero greenhouse gas emissions by 2050–2070 is necessary to limit global warming to 2 °C. This paper assembles and evaluates technical and policy interventions both on the supply side and on the demand side. It identifies measures that employed together can achieve net zero industrial emissions in the required timeframe. Key supply-side technologies include energy efficiency (especially at the system level) carbon capture electrification and zero-carbon hydrogen as a heat source and chemical feedstock. There are also promising technologies specific to each of the three top-emitting industries: cement iron & steel and chemicals & plastics. These include cement admixtures and alternative chemistries several technological routes for zero-carbon steelmaking and novel chemical catalysts and separation technologies. Crucial demand-side approaches include material-efficient design reductions in material waste substituting low-carbon for high-carbon materials and circular economy interventions (such as improving product longevity reusability ease of refurbishment and recyclability). Strategic well-designed policy can accelerate innovation and provide incentives for technology deployment. High-value policies include carbon pricing with border adjustments or other price signals; robust government support for research development and deployment; and energy efficiency or emissions standards. These core policies should be supported by labeling and government procurement of low-carbon products data collection and disclosure requirements and recycling incentives. In implementing these policies care must be taken to ensure a just transition for displaced workers and affected communities. Similarly decarbonization must complement the human and economic development of low- and middle-income countries.
The Social Dimensions of Moving Away From Gas Cookers and Hobs- Challenges and Opportunities in Transition to Low Carbon Cooking
May 2020
Publication
Heat is one of the UK’s largest energy-consuming and carbon-emitting sectors and potentially the most difficult to decarbonise. The UK’s Clean Growth Strategy identifies that heat decarbonisation in buildings and industry will likely involve shifting away from natural gas to alternative energy vectors like electricity and hydrogen. This will mean transition of existing cooking appliances away from natural gas resulting in social implications that require detailed analysis for optimal transition.
This report investigates the social dimensions of heat decarbonisation in cooking appliances specifically moving away from gas cookers and hobs. It presents a first step in tackling the following questions.
This report investigates the social dimensions of heat decarbonisation in cooking appliances specifically moving away from gas cookers and hobs. It presents a first step in tackling the following questions.
- How are current carbon-intensive cooking technologies part of existing cooking practices and broader social and material structures?
- What are the challenges and opportunities for cooking heat decarbonisation in terms of consumer acceptance carbon and energy reductions and business/market opportunities?
- What interventions are needed to realise policy objectives of heat de-carbonisation?
- The report builds on interviews with BEIS’s long-term heat strategy experts and key external stakeholders together with a review of secondary data on trends in cooking and appliance use in the UK. Further it presents an annotated bibliography of literature on the social implications of heat decarbonisation and sustainable food transitions more broadly. The multidisciplinary review of the literature is structured around Southerton et al.’s (2011) ISM (Individual- Social- and Material-context) framework for a systemic review of the various change-agents required for transition. Finally a comparative review of the social challenges and opportunities identified in the ISM contexts is presented along with the potential policy interventions in each. The report concludes with a list of recommendations in terms of evidence and data gathering; research; policy; and a set of general recommendations for heat decarbonisation policy.
Making the Hydrogen Economy Possible: Accelerating Clean Hydrogen in an Electrified Economy
Apr 2021
Publication
In its new report Making the Hydrogen Economy Possible: Accelerating clean hydrogen in an electrified economy the ETC outlines the role of clean hydrogen in achieving a highly electrified net-zero economy. The report sets out how a combination of private-sector collaboration and policy support can drive the initial ramp up of clean hydrogen production and use to reach 50 million tonnes by 2030.<br/>Clean hydrogen will play a complementary role to decarbonise sectors where direct electrification is likely to be technologically very challenging or prohibitively expensive such as in steel production and long-distance shipping. The report highlights how critical rapid ramp-up of production and use in the 2020s is to unlock cost reductions and to make mid-century growth targets achievable.<br/>This report is part of the ETC’s wider Making Mission Possible Series – a series of reports outlining how to scale up clean energy provision within the next 30 years to meet the needs of a net-zero greenhouse gas emissions (GHG) economy by mid-century. The reports in the series analyse and set out specific actions required in the next decade to put this net-zero by 2050 target within reach.
A Novel Integration of a Green Power-to-ammonia to Power System: Reversible Solid Oxide Fuel Cell for Hydrogen and Power Production Coupled with an Ammonia Synthesis Unit
Mar 2021
Publication
Renewable energy is a key solution in maintaining global warming below 2 °C. However its intermittency necessitates the need for energy conversion technologies to meet demand when there are insufficient renewable energy resources. This study aims to tackle these challenges by thermo-electrochemical modelling and simulation of a reversible solid oxide fuel cell (RSOFC) and integration with the Haber Bosch process. The novelty of the proposed system is usage of nitrogen-rich fuel electrode exhaust gas for ammonia synthesis during fuel cell mode which is usually combusted to prevent release of highly flammable hydrogen into the environment. RSOFC round-trip efficiencies of 41–53% have been attained when producing excess ammonia (144 kg NH3/hr) for the market and in-house consumption respectively. The designed system has the lowest reported ammonia electricity consumption of 6.4–8.21 kWh/kg NH3 power-to-hydrogen power-to-ammonia and power-generation efficiencies of 80% 55–71% and 64–66%.
PEFC System Reactant Gas Supply Management and Anode Purging Strategy: An Experimental Approach
Jan 2022
Publication
In this report a 5 kW PEFC system running on dry hydrogen with an appropriately sized Balance of Plant (BoP) was used to conduct experimental studies and analyses of gas supply subsystems. The improper rating and use of BoP components has been found to increase parasitic loads which consequently has a direct effect on the polymer electrolyte fuel cell (PEFC) system efficiency. Therefore the minimisation of parasitic loads while maintaining desired performance is crucial. Nevertheless little has been found in the literature regarding experimental work on large stacks and BoP with the majority of papers concentrating on modelling. A particular interest of our study was the anode side of the fuel cell. Additionally the rationale behind the use of hydrogen anode recirculation was scrutinised and a novel anode purging strategy was developed and implemented. Through experimental modelling the use of cathode air blower was minimised since it was found to be the biggest contributor to the parasitic loads.
CFD Simulations of Large Scale LH2 Dispersion in Open Environment
Sep 2021
Publication
An inter-comparison among partners’ CFD simulations has been carried out within the EU-funded project PRESLHY to investigate the dispersion of the mixture cloud formed from large scale liquid hydrogen release. Rainout experiments performed by Health and Safety Executive (HSE) have been chosen for the work. From the HSE experimental series trial-11 was selected forsimulation due to its conditions where only liquid flow at the nozzle was achieved. During trial-11 liquid hydrogen is spilled horizontally 0.5 m above a concrete pad from a 5 barg tank pressure through a 12 mm (1/2 inch) nozzle. The dispersion takes place outdoors and thus it is imposed to variant wind conditions. Comparison of the CFD results with the measurements at several sensors is presented and useful conclusions are drawn.
Net Zero after Covid: Behavioural Principles for Building Back Better
Dec 2020
Publication
Alongside our Sixth Carbon Budget Advice the Climate Change Committee (CCC) are publishing a paper from Professor Nick Chater the Committee’s behavioural science specialist. This paper considers three behavioural principles that explain how people have adapted so rapidly and how we might “build back better” as we emerge from the pandemic with a particular focus on meeting the challenge of dramatically reducing greenhouse gas (GHG) emissions over the coming decades. The principles are:
- The power law of practice: People organizations and whole industries learn to adapt to new ways of working following a surprisingly predictable pattern. This can help predict where adaptation to new ways of living and working is likely to succeed or fail.
- The status quo effect: People and organizations tend to prefer the current status quo but can often adjust rapidly to prefer a new status quo. However we tend to systematically underestimate such effects and therefore can sometimes resist changes that in retrospect we may ultimately prefer.
- Unwritten rules: Our social behaviour is guided by implicit guidelines about what is “appropriate” which can be somewhat independent of our personal values. Changing these implicit rules alongside changes in regulation and the law is crucial to adapting to new circumstances—and the pandemic has shown that rapid change is possible though sometimes resisted (e.g. new norms about mask wearing and social distancing).
Heat and Buildings Strategy
Oct 2021
Publication
The heat and buildings strategy sets out the government’s plan to significantly cut carbon emissions from the UK’s 30 million homes and workplaces in a simple low-cost and green way whilst ensuring this remains affordable and fair for households across the country. Like the transition to electric vehicles this will be a gradual transition which will start by incentivizing consumers and driving down costs.<br/>There are about 30 million buildings in the UK. Heating these buildings contributes to almost a quarter of all UK emissions. Addressing the carbon emissions produced in heating and powering our homes workplaces and public buildings can not only save money on energy bills and improve lives but can support up to 240000 skilled green jobs by 2035 boosting the economic recovery levelling up across the country and ensuring we build back better.<br/>The heat and buildings strategy builds on the commitments made in Clean growth: transforming heating our Energy white paper and the Prime Minister’s 10 point plan. This strategy aims to provide a clear direction of travel for the 2020s set out the strategic decisions that need to be taken this decade and demonstrate how we plan to meet our carbon targets and remain on track for net zero by 2050.
Hydrogen for a Net Zero GB An Integrated Energy Market Perspective
Jul 2020
Publication
Our new independent report finds that hydrogen can play an important role in UK’s ambitious decarbonisation plan and boost its global industrial competitiveness.
Key insights from this new analysis include:
Key insights from this new analysis include:
- New independent report from Aurora Energy Research shows that hydrogen can meet up to half of Great Britain’s (GB) final energy demand by 2050 providing an important pathway to reaching UK’s ambitious Net Zero targets.
- The report concludes that both blue hydrogen (produced from natural gas after reforming to remove carbon content) and green hydrogen (produced by using power to electrolyse water) are expected to play an important role providing up to 480TWh of hydrogen or c.45% of GB’s final energy demand by 2050.
- All Net Zero scenarios require substantial growth in low-carbon generation such as renewables and nuclear. Large-scale hydrogen adoption could help to integrate renewables into the power system by reducing the power sector requirement for flexibility during peak winter months and boosting revenues for clean power generators by c. £3bn per year by 2050.
- The rollout of hydrogen could accelerate green growth and enable the development of globally competitive low-carbon industrial clusters while utilising UK’s competitive advantage on carbon capture.
- In facilitating the identification of a cost-effective hydrogen pathway there are some low-regret options for Government to explore including the stimulation of hydrogen demand in key sectors the deployment of CCS in strategic locations and the standardisation of networks. These initiatives could form an important part of the UK Government’s post-COVID stimulus plan.
An Evaluation of Turbocharging and Supercharging Options for High-Efficiency Fuel Cell Electric Vehicles
Dec 2018
Publication
Mass-produced off-the-shelf automotive air compressors cannot be directly used for boosting a fuel cell vehicle (FCV) application in the same way that they are used in internal combustion engines since the requirements are different. These include a high pressure ratio a low mass flow rate a high efficiency requirement and a compact size. From the established fuel cell types the most promising for application in passenger cars or light commercial vehicle applications is the proton exchange membrane fuel cell (PEMFC) operating at around 80 ◦C. In this case an electric-assisted turbocharger (E-turbocharger) and electric supercharger (single or two-stage) are more suitable than screw and scroll compressors. In order to determine which type of these boosting options is the most suitable for FCV application and assess their individual merits a co-simulation of FCV powertrains between GT-SUITE and MATLAB/SIMULINK is realised to compare vehicle performance on the Worldwide Harmonised Light Vehicle Test Procedure (WLTP) driving cycle. The results showed that the vehicle equipped with an E-turbocharger had higher performance than the vehicle equipped with a two-stage compressor in the aspects of electric system efficiency (+1.6%) and driving range (+3.7%); however for the same maximal output power the vehicle’s stack was 12.5% heavier and larger. Then due to the existence of the turbine the E-turbocharger led to higher performance than the single-stage compressor for the same stack size. The solid oxide fuel cell is also promising for transportation application especially for a use as range extender. The results show that a 24-kWh electric vehicle can increase its driving range by 252% due to a 5 kW solid oxide fuel cell (SOFC) stack and a gas turbine recovery system. The WLTP driving range depends on the charge cycle but with a pure hydrogen tank of 6.2 kg the vehicle can reach more than 600 km.
Hydrothermal Synthesis of Iridium-Substituted NaTaO3 Perovskites
Jun 2021
Publication
Iridium-containing NaTaO3 is produced using a one-step hydrothermal crystallisation from Ta2O5 and IrCl3 in an aqueous solution of 10 M NaOH in 40 vol% H2O2 heated at 240 °C. Although a nominal replacement of 50% of Ta by Ir was attempted the amount of Ir included in the perovskite oxide was only up to 15 mol%. The materials are formed as crystalline powders comprising cube-shaped crystallites around 100 nm in edge length as seen by scanning transmission electron microscopy. Energy dispersive X-ray mapping shows an even dispersion of Ir through the crystallites. Profile fitting of powder X-ray diffraction (XRD) shows expanded unit cell volumes (orthorhombic space group Pbnm) compared to the parent NaTaO3 while XANES spectroscopy at the Ir LIII-edge reveals that the highest Ir-content materials contain Ir4+. The inclusion of Ir4+ into the perovskite by replacement of Ta5+ implies the presence of charge-balancing defects and upon heat treatment the iridium is extruded from the perovskite at around 600 °C in air with the presence of metallic iridium seen by in situ powder XRD. The highest Ir-content material was loaded with Pt and examined for photocatalytic evolution of H2 from aqueous methanol. Compared to the parent NaTaO3 the Ir-substituted material shows a more than ten-fold enhancement of hydrogen yield with a significant proportion ascribed to visible light absorption.
Experimental Study of the Explosion Severity of Vented Methane/Hydrogen Deflagrations
Sep 2021
Publication
Adding hydrogen to mains natural gas has been identified as one of the main strategies to reduce CO2 emissions in the United Kingdom. This work aims to characterise the explosion severity of 80:20 v./v. methane/hydrogen blends (‘a blend’) and methane vented deflagrations. The explosion severity of homogenous mixtures was measured in a 15 m3 cubic steel chamber in which the relief area was provided by four windows and a door covered with polypropylene sheet. The pressure increase over time was characterised using piezo-resistive pressure transducers and the flame speed was estimated using ionisation probes installed in the walls of the enclosure. The explosion severity of both mixtures was determined for different equivalence ratios from lean to rich mixtures. The pressure over time presented very similar behaviour for both mixtures comprising multiple peaks divided into three main stages: a first stage related to a spherical confined explosion until the opening of the vent a second stage generated by increased combustion during venting and an oscillatory peak generated by acoustic disturbances with the enclosure. A slight increase in the first stage overpressure was observed for the blend in comparison with methane regardless of the equivalence ratio but no general trend in pressure was observed for other stages of the propagation. The effect of the blockage ratio on explosion severity was studied by adding metallic elements representing furniture in a room.
The Role of Clean Hydrogen Value Chain in a Successful Energy Transition of Japan
Aug 2022
Publication
The clean hydrogen in the prioritized value chain platform could provide energy incentives and reduce environmental impacts. In the current study strengths weaknesses opportunities and threats (SWOT) analysis has been successfully applied to the clean hydrogen value chain in different sectors to determine Japan’s clean hydrogen value chain’s strengths weaknesses opportunities and threats as a case study. Japan was chosen as a case study since we believe that it is the only pioneer country in that chain with a national strategy investments and current projects which make it unique in this way. The analyses include evaluations of clean energy development power supply chains regional energy planning and renewable energy development including the internal and external elements that may influence the growth of the hydrogen economy in Japan. The ability of Japan to produce and use large quantities of clean hydrogen at a price that is competitive with fossil fuels is critical to the country’s future success. The implementation of an efficient carbon tax and carbon pricing is also necessary for cost parity. There will be an increasing demand for global policy coordination and inter-industry cooperation. The results obtained from this research will be a suitable model for other countries to be aware of the strengths weaknesses opportunities and threats in this field in order to make proper decisions according to their infrastructures potentials economies and socio-political states in that field.
Hydrogenerally - Episode 8: Hydrogen for Combustion
Jan 2023
Publication
In this episode Steffan Eldred Hydrogen Knowledge Transfer Manager and Debra Jones Chemistry Knowledge Transfer Manager from Innovate UK KTN talk about hydrogen combustion with special guest Duncan Engeham European Research and Development Director at Cummins Inc.
The podcast can be found on their website.
The podcast can be found on their website.
OIES Podcast – PolyGrid 2050: Integrating Hydrogen into the European Energy Transfer Infrastructure Landscape
Feb 2023
Publication
In this podcast David Ledesma talks with Rahmat Poudineh and Martin Palovic about their paper on integrating hydrogen into the European energy transfer infrastructure landscape. As hydrogen is expected to play an important role in European plans towards climate neutrality adequate hydrogen transport (and storage) infrastructure needs to be established. However hydrogen transport infrastructures are costly and have a long lead time. Furthermore hydrogen can be transported via a variety of means: it can be transported as a gas via pipelines or liquid via road rail and sea or even converted to derivatives such as ammonia or methanol for long distance transportation. It is also possible to transfer electrical energy instead of hydrogen and produce hydrogen in a decentralized way. From a system perspective all these infrastructures represent elements of a grand hydrogen ‘polygrid’ that will be the backbone of the future decarbonized energy system. This raises the fundamental question of how to prevent inefficiency and infrastructure redundancy across different modes of hydrogen transport. The task is made more challenging by technological uncertainty the unpredictability of future supply and demand for hydrogen network externality effects and investment irreversibility of grid-based infrastructures. In this podcast we discuss three possible coordination approaches to optimise future cross-sectoral investment into hydrogen transport infrastructure and highlight their strengths and shortcomings.
The podcast can be found on their website.
The podcast can be found on their website.
Does the United Kingdom Have Sufficient Geological Storage Capacity to Support a Hydrogen Economy? Estimating the Salt Cavern Storage Potential of Bedded Halite Formations
Jun 2022
Publication
Hydrogen can be used to enable decarbonisation of challenging applications such as provision of heat and as a fuel for heavy transport. The UK has set out a strategy for developing a new low carbon hydrogen sector by 2030. Underground storage will be a key component of any regional or national hydrogen network because of the variability of both supply and demand across different end-use applications. For storage of pure hydrogen salt caverns currently remain the only commercially proven subsurface storage technology implemented at scale. A new network of hydrogen storage caverns will therefore be required to service a low carbon hydrogen network. To facilitate planning for such systems this study presents a modelling approach used to evaluate the UK's theoretical hydrogen storage capacity in new salt caverns in bedded rock salt. The findings suggest an upper bound potential for hydrogen storage exceeding 64 million tonnes providing 2150 TWh of storage capacity distributed in three discrete salt basins in the UK. The modelled cavern capacity has been interrogated to identify the practical inter-seasonal storage capacity suitable for integration in a hydrogen transmission system. Depending on cavern spacing a peak load deliverability of between 957 and 1876 GW is technically possible with over 70% of the potential found in the East Yorkshire and Humber region. The range of geologic uncertainty affecting the estimates is approximately ±36%. In principle the peak domestic heating demand of approximately 170 GW across the UK can be met using the hydrogen withdrawn from caverns alone albeit in practice the storage potential is unevenly distributed. The analysis indicates that the availability of salt cavern storage potential does not present a limiting constraint for the development of a low-carbon hydrogen network in the UK. The general framework presented in this paper can be applied to other regions to estimate region-specific hydrogen storage potential in salt caverns.
No more items...