- Home
- A-Z Publications
- Publications
Publications
Recent Developments of Proton Exchange Membranes for PEMFC: A Review
Sep 2022
Publication
The decreasing abundance of conventional energy resources of nature such as crude oil natural gas and coal is putting forward the issues of energy shortcoming for the future. With a sentiment of this most researchers are now directing either on non-conventional resources that already prevail or invent it. The most promising non-conventional energy resource is the hydrogen energy which can be used in fuel cell to get electricity. Therefore a number of researchers are putting a light on developing the most efficient and affordable fuel cell. This review is mainly focused on the developments of proton exchange membranes (PEMs) in two parts as low and high temperature PEMs for proton exchange membrane fuel cell (PEMFC) and based on that some outperformed PEMs are mentioned in the respective tables. Most of the energy and automobile industries are concentrating to apply PEMFCs for power generation and to apply in vehicles. The cost of PEMFCs is higher due to the manufacturing cost of PEM. Therefore research works in PEMs are now in trend to reduce the cost to improve efficiency and to withstand particular operating conditions. In this review article recent developments in PEM by number of researchers and the importance of it in near future have been elicited.
Techno-economic Analysis of On-site Blue Hydrogen Production Based on Vacuum Pressure Adsorption: Practical Application to Real-world Hydrogen Refueling Stations
Feb 2023
Publication
Although climate change can be efficiently curbed by shifting to low-carbon (blue) hydrogen as an energy carrier to achieve carbon neutrality current hydrogen production mainly proceeds via the gray pathway i.e. generates large amounts of CO2 as a byproduct. To address the need for cleaner hydrogen production we herein propose novel CO2 capture processes based on the integration of vacuum pressure swing adsorption into a gray hydrogen production process and perform retrofitting to a blue hydrogen production process for on-site hydrogen refueling stations. Techno-economic analysis reveals that the implementation of the proposed capture processes allows one to significantly reduce CO2 emission while preserving thermal efficiency and the economic feasibility of this implementation in different scenarios is determined by computing the levelized cost of hydrogen. As a result blue hydrogen is shown to hold great promise for the realization of sustainable energy usage and the net-zero transition.
Thermodynamic Assessment of a Hybrid Methane Cracking System for Liquified Hydrogen Production and Enhanced Oil Recovery Using CO2
Oct 2022
Publication
Hydrogen fuel production from methane cracking is a cleaner process compared to steam methane reforming due to zero greenhouse gas emissions. Carbon black that is co-produced is valuable and can be marketed to other industries. As this is a high-temperature process using solar energy can further improve its sustainability. In this study an integrated solar methane cracking system is proposed and the efficient utilization of the hydrogen and carbon products is explored. The carbon by-product is used in a direct carbon fuel cell and oxy- combustion. These processes eliminate the need for carbon capture technologies as they produce pure CO2 exhaust streams. The CO2 produced from the systems is used for enhanced oil recovery to produce crude oil. The produced turquoise hydrogen is liquified to make it suitable for exportation. The process is simulated on Aspen Plus® and its energy and exergy efficiencies are evaluated by carrying out a detailed thermodynamic analysis. A reservoir simulation is used to study the amount of oil that can be produced using the captured CO2. The overall system is studied for oil production over 20 years and energy and exergy of efficiencies 42.18% and 40.18% respectively were found. Enhanced oil recovery improves the recovery rate from 24.8% to 64.3%.
Green Hydrogen-Based Direct Reduction for Low-Carbon Steelmaking
May 2020
Publication
The European steel industry aims at a CO2 reduction of 80–95% by 2050 ensuring that Europe will meet the requirements of the Paris Agreement. As the reduction potentials of the current steelmaking routes are low the transfer toward breakthrough-technologies is essential to reach these goals. Hydrogen-based steelmaking is one approach to realize CO2-lean steelmaking. Therefore the natural gas (NG)-based direct reduction (DR) acts as a basis for the first step of this transition. The high flexibility of this route allows the gradual addition of hydrogen and in a long-term view runs the process with pure hydrogen. Model-based calculations are performed to assess the possibilities for injecting hydrogen. Therefore NG- and hydrogen-based DR models are developed to create new process know-how and enable an evaluation of these processes in terms of energy demand CO2-reduction potentials and so on. The examinations show that the hydrogen-based route offers a huge potential for green steelmaking which is strongly depending on the carbon footprint of the electricity used for the production of hydrogen. Only if the carbon intensity is less than about 120 g CO2 kWh1 the hydrogen-based process emits less CO2 than the NG-based DR process.
Hydrogen as a Renewable Energy Carrier in a Hybrid Configuration of Distributed Energy Systems: Bibliometric Mapping of Current Knowledge and Strategies
Jul 2023
Publication
Storing energy in hydrogen deposits balances the operation of energy systems and is an effective tool in the process of energy transformation towards achieving Sustainable Development Goals. To assess the validity of its use as an alternative renewable energy carrier in dispersed energy systems of hybrid configuration a comprehensive review of scientific literature was conducted in this study based on bibliometric analysis. The bibliographic database used in the study was the international Web of Science database. This review contributes to a better understanding of the characteristics of the selected research area. The evolution of research trends implemented in the design of energy systems associated with hydrogen technologies is revealed clearly indicating that it is a developing field. In recent years there has been an increase in the number of publications although the territorial range of research (mainly simulation) conducted in the domain does not include areas with the most favourable infrastructural conditions. The analysis reveals weak cooperation between South American African East Asian and Oceanic countries. In the light of earlier thematically similar literature reviews several research gaps are also identified and proposals for future research are presented. They concern in particular the parallel implementation and optimization of the operation of hydrogen (HRES—Hybrid Renewable Energy System and HESS—Hybrid Energy Storage System) solutions in terms of economics ecology lifespan and work efficiency as well as their feasibility analysis. With the support of other researchers and those involved in the subject matter this review may contribute to the further development of hybrid hydrogen systems in terms of increasing competitiveness and promoting the implementation of these technologies.
Techno-economic Study of a 100-MW-class Multi-energy Vehicle Charging/Refueling Station: Using 100% Renewable, Liquid Hydrogen, and Superconductor Technologies
Dec 2022
Publication
Renewable energies such as the wind energy and solar energy generate low-carbon electricity which can directly charge battery electric vehicles (BEVs). Meanwhile the surplus electricity can be used to produce the “green hydrogen” which provides zero-emission hydrogen fuels to those fuel cell electric vehicles (FCEVs). In order to charge/refuel multi-energy vehicles we propose a novel scheme of hybrid hydrogen/electricity supply using cryogenic and superconducting technologies. In this scheme the green hydrogen is further liquefied into the high-density and low-pressure liquid hydrogen (LH2) for bulk energy storage and transmission. Taking the advantage of the cryogenic environment of LH2 (20 K) it can also be used as the cryogen to cool down super conducting cables to realize the virtually zero-loss power transmission from 100 % renewable sources to vehicle charging stations. This hybrid LH2/electricity energy pipeline can realize long-distance large-capacity and high efficiency clean energy transmission to fulfil the hybrid energy supply demand for BEVs and FCEVs. For the case of a 100 MW-class hybrid hydrogen/electricity supply station the system principle and energy management strategy are analyzed through 9 different operating sub-modes. The corresponding static and dynamic economic modeling are performed and the economic feasibility of the hybrid hydrogen/electricity supply is verified using life-cycle analysis. Taking an example of wind power capacity 1898 MWh and solar power capacity 1619 MWh per day the dynamic payback period is 15.06 years the profitability index is 1.17 the internal rate of return is 7.956 % and the accumulative NPV is 187.92 M$. The system design and techno-economic analysis can potentially offer a technically/economically superior solution for future multi-energy vehicle charging/refueling systems.
A Simple and Low-cost Integrative Sensor System for Methane and Hydrogen Measurement
Sep 2020
Publication
Energy production by methanization or gasification of biomass is dependant on the chemical composition of the gas generated. The resistive sensors based on semiconductor metal oxides like the MQ series sensors are inexpensive and frequently used in gas detection. These sensors initially dedicated to detecting gas leaks in safety systems have relatively small measurement ranges (i.e. limited to concentrations below 10000 ppm). It is therefore necessary to find solutions to adapt these categories of sensors for gas measurements in the energy sector where the gas concentration is much more significant. In this article we propose a protocol using an adaptable capsule for MQ-4 and MQ-8 sensors to measure high concentrations of CH4 and H2 respectively. The technique consists of diluting the gas to be studied in a known volume of air. Three methods are proposed and compared regarding the linearity and the repeatability of the measurements. The first method was done in an airtight enclosed chamber the second method consists of directly injecting the gas on the sensor placed in an open environment and the final method was accomplished by direct injection of the gas on the sensor placed in a partially closed capsule. Comparisons show that the first technique provides the best repeatability with a maximum standard deviation of 13.88% for CH4 measurement and 5.1% for H2. However its linearity is weak (i.e. R2 ¼ 0.8637 for CH4 and R2 ¼ 0.5756 for H2). The second technique has better linearity but bad repeatability. The third technique presents the best results with R2 values of 0.9973 for the CH4 measurement and 0.9472 for H2. The use of the partially closed capsule resulted in an acceptable linear response of the sensors by up to 20% concentration of CH4 and until 13.33% concentration of H2 in the studied gas. The use of this simple and low-cost technique facilitates the characterization of combustible gases in isolated areas. It allows local operators of biomass valorization systems to control and improve their installations while avoiding the high costs of conventional measurement devices. This study hence contributes to the development of rural electrification projects in remote areas.
Combustion Characterization of Hybrid Methane-hydrogen Gas in Domestic Swirl Stoves
Oct 2022
Publication
Combustion of hybrid natural gas (methane) and hydrogen mixture in domestic swirl stoves has been characterized using hot-state experiments and numerical analysis. The detailed combustion mechanism of methane and hydrogen (GRI-Mech 3.0) has been simplified to obtain reduced number of chemical reactions involved (82 % reduction). The novel simplified combustion mechanism developed has been used to obtain combustion characteristics of hybrid methane-hydrogen mixture. The difference between the calculations from the detailed and the simplified mechanisms has been found to be Combustion of hybrid natural gas (methane) and hydrogen mixture in domestic swirl stoves has been characterized using hot-state experiments and numerical analysis. The detailed combustion mechanism of methane and hydrogen (GRI-Mech 3.0) has been simplified to obtain reduced number of chemical reactions involved (82 % reduction). The novel simplified combustion mechanism developed has been used to obtain combustion characteristics of hybrid methane-hydrogen mixture. The difference between the calculations from the detailed and the simplified mechanisms has been found to be <1 %. A numerical model based on the simplified combustion model is developed rigorously tested and validated against hot-state tests. The results depict that the maximum difference in combustion zone’s average temperature is <13 %. The investigations have then been extended to hybrid methane-hydrogen mixtures with varying volume fraction of hydrogen. The results show that for a mixture containing 15 % hydrogen the release of CO due to combustion reduces by 25 % while the combustion zone’s average temperature reduces by 6.7 %. The numerical results and hot-state tests both confirm that the temperature remains stable when hybrid methane-hydrogen mixture is used in domestic swirl gas stoves demonstrating its effectiveness in cooking processes.
Demonstration of Green Hydrogen Production Using Solar Energy at 28% Efficiency and Evaluation of its Economic Viability
Jan 2021
Publication
The solar to hydrogen (STH) efficiency of photovoltaic-electrolysis (PV-E) setups is a key parameter to lower the cost of green hydrogen produced. Commercial c-Si solar cells have neared saturation with respect to their efficiency which warrants the need to look at alternative technologies. In this work we report a concentrator photovoltaic-electrolysis (CPV-E) setup with a STH efficiency of 28% at 41 suns (without the use of Fresnel lenses) the highest reported efficiency using an alkaline system to date. Using this as a base case we carried out a detailed techno-economic (TEA) analysis which showed that despite the high cost associated with CPV cells the levelized cost of hydrogen (LCOH) is at $5.9 kg1 close to that from c-Si solar farms ($4.9 kg1 ) primarily due to the high STH efficiency. We also report sensitivity analysis of factors affecting both CPV and alkaline electrolyser systems such as the CPV module efficiency and installed capacity electrolyser stack lifetime operating current density and working hours. Our results indicate that in a scenario where the installed capacity of CPV technology matches that of silicon and with an electrolyser operating current density of 0.7 A cm2 the LCOH from CPV electrolysis systems can be.
The Role of Renewable Energies, Storage and Sector-Coupling Technologies in the German Energy Sector under Different CO2 Emission Restrictions
Aug 2022
Publication
This study aimed to simulate the sector-coupled energy system of Germany in 2030 with the restriction on CO2 emission levels and to observe how the system evolves with decreasing emissions. Moreover the study presented an analysis of the interconnection between electricity heat and hydrogen and how technologies providing flexibility will react when restricting CO2 emissions levels. This investigation has not yet been carried out with the technologies under consideration in this study. It shows how the energy system behaves under different set boundaries of CO2 emissions and how the costs and technologies change with different emission levels. The study results show that the installed capacities of renewable technologies constantly increase with higher limitations on emissions. However their usage rates decreases with low CO2 emission levels in response to higher curtailed energy. The sector-coupled technologies behave differently in this regard. Heat pumps show similar behaviour while the electrolysers usage rate increases with more renewable energy penetration. The system flexibility is not primarily driven by the hydrogen sector but in low CO2 emission level scenarios the flexibility shifts towards the heating sector and electrical batteries.
Techno-economic Assessment of a Chemical Looping Splitting System for H2 and CO Co-generation
Feb 2022
Publication
The natural gas (NG) reforming is currently one of the low-cost methods for hydrogen production. However the mixture of H2 and CO2 in the produced gas inevitably includes CO2 and necessitates the costly CO2 separation. In this work a novel double chemical looping involving both combustion (CLC) and sorption-enhanced reforming (SE-CLR) was proposed towards the co-production of H2 and CO (CLC-SECLRHC) in two separated streams. CLC provides reactant CO2 and energy to feed SECLRHC which generates hydrogen in a higher purity as well as the calcium cycle to generate CO in a higher purity. Techno-economic assessment of the proposed system was conducted to evaluate its efficiency and economic competitiveness. Studies revealed that the optimal molar ratios of oxygen carrier (OC)/NG and steam/NG for reforming were recommended to be 1.7 and 1.0 respectively. The heat integration within CLC and SECLRHC units can be achieved by circulating hot OCs. The desired temperatures of fuel reactor (FR) and reforming reactor (RR) should be 850 °C and 600 °C respectively. The heat coupling between CLC and SECLRHC units can be realized via a jacket-type reactor and the NG split ratio for reforming and combustion was 0.53:0.47. Under the optimal conditions the H2 purity the H2 yield and the CH4 conversion efficiency were 98.76% 2.31 mol mol-1 and 97.96% respectively. The carbon and hydrogen utilization efficiency respectively were 58.60% and 72.45% in terms of the total hydrogen in both steam and NG. The exergy efficiency of the overall process reached 70.28%. In terms of the conventional plant capacity (75×103 t y-1 ) and current raw materials price (2500 $ t-1 ) the payback period can be 6.2 years and the IRR would be 11.5 demonstrating an economically feasible and risk resistant capability.
Comparative Levelized Cost Analysis of Transmitting Renewable Solar Energy
Feb 2023
Publication
A bottom-up cost analysis for delivering utility-scale PV-generated electricity as hydrogen through pipelines and as electricity through power is undertaken. Techno-economic generation and demand data for California are used to calculate the levelized cost of transmitting (LCOT) energy and the levelized cost of electricity (LCOE) prior to distribution. High-voltage levels of 230 kV and 500 kV and 24-inch and 36-inch pipelines for 100 to 700 miles of transmission are considered. At 100 miles of transmission the cost of transmission between each medium is comparable. At longer distances the pipeline scenarios become increasingly cheaper at low utilization levels. The all-electric pathways utilizing battery energy storage systems can meet 95% of the load for as low as 356 USD/MWh whereas when meeting 100% of load with the hydrogen gas turbine and fuel cell pathways the costs are 278 and 322 USD/MWh respectively.
Renewable Methanol Synthesis
Oct 2019
Publication
Renewable methanol production is an emerging technology that bridges the gap in the shift from fossil fuel to renewable energy. Two thirds of the global emission of CO2 stems from humanity’s increasing energy need from fossil fuels. Renewable energy mainly from solar and wind energy suffers from supply intermittency which current grid infrastructures cannot accommodate. Excess renewable energy can be harnessed to power the electrolysis of water to produce hydrogen which can be used in the catalytic hydrogenation of waste CO2 to produce renewable methanol. This review considers methanol production in the current context regionally for Europe which is dominated by Germany and globally by China. Appropriate carbon-based feedstock for renewable methanol production is considered as well as state-of-the-art renewable hydrogen production technologies. The economics of renewable methanol production necessitates the consideration of regionally relevant methanol derivatives. The thermodynamics kinetics catalytic reaction mechanism operating conditions and reactor design are reviewed in the context of renewable methanol production to reveal the most up to date understanding.
First Hydrogen Fuel Sampling from a Fuel Cell Hydrogen Electrical Vehicle–Validation of Hydrogen Fuel Sampling System to Investigate FCEV Performance
Aug 2022
Publication
Fuel cell electric vehicles (FCEV) are developing quickly from passenger vehicles to trucks or fork-lifts. Policymakers are supporting an ambitious strategy to deploy fuel cell electrical vehicles with infrastructure as hydrogen refueling stations (HRS) as the European Green deal for Europe. The hydrogen fuel quality according to international standard as ISO 14687 is critical to ensure the FCEV performance and that poor hydrogen quality may not cause FCEV loss of performance. However the sampling system is only available for nozzle sampling at HRS. If a FCEV may show a lack of performance there is currently no methodology to sample hydrogen fuel from a FCEV itself. It would support the investigation to determine if hydrogen fuel may have caused any performance loss. This article presents the first FCEV sampling system and its comparison with the hydrogen fuel sampling from the HRS nozzle (as requested by international standard ISO 14687). The results showed good agreement with the hydrogen fuel sample. The results demonstrate that the prototype developed provides representative samples from the FCEV and can be an alternative to determine hydrogen fuel quality. The prototype will require improvements and a larger sampling campaign.
Risks and Opportunities Associated with Decarbonising Rotterdam’s Industrial Cluster
Jun 2019
Publication
The Port of Rotterdam is an important industrial cluster comprising mainly oil refining chemical production and power generation. In 2016 the port’s industry accounted for 19% of the Netherlands’ total CO2 emissions. The Port of Rotterdam Authority is aware that the cluster is heavily exposed to future decarbonisation policies as most of its activities focus on trading handling converting and using fossil fuels. Based on a study for the Port Authority using a mixture of qualitative and quantitative methods our article explores three pathways whereby the port’s industry can maintain its strong position while significantly reducing its CO2 emissions and related risks by 2050. The pathways differ in terms of the EU’s assumed climate change mitigation ambitions and the key technological choices made by the cluster’s companies. The focus of the paper is on identifying key risks associated with each scenario and ways in which these could be mitigated.
A Review of Ni Based Powder Catalyst for Urea Oxidation in Assisting Water Splitting Reaction
Jan 2022
Publication
Water splitting has been regarded as a sustainable and environmentally-friendly technique to realize green hydrogen generation while more energy is consumed due to the high overpotentials required for the anode oxygen evolution reaction. Urea electrooxidation an ideal substitute is thus received increasing attention in assisting water-splitting reactions. Note that highly efficient catalysts are still required to drive urea oxidation and the facile generation of high valence state species is significant in the reaction based on the electrochemical-chemical mechanisms. The high cost and rareness make the noble metal catalysts impossible for further consideration in large-scale application. Ni-based catalysts are very promising due to their cheap price facile structure tuning good compatibility and easy active phase formation. In the light of the significant advances made recently herein we reviewed the recent advances of Ni-based powder catalysts for urea oxidation in assisting water-splitting reaction. The fundamental of urea oxidation is firstly presented to clarify the mechanism of urea-assisted water splitting and then the prevailing evaluation indicators are briefly expressed based on the electrochemical measurements. The catalyst design principle including synergistic effect electronic effect defect construction and surface reconstruction as well as the main fabrication approaches are presented and the advances of various Ni-based powder catalysts for urea assisted water splitting are summarized and discussed. The problems and challenges are also concluded for the Ni-based powder catalysts fabrication the performance evaluation and their application. Considering the key influence factors for catalytic process and their application attention should be given to structure-property relationship deciphering novel Ni-based powder catalysts development and their construction in the real device; specifically the effort should be directed to the Ni-based powder catalyst with multi-functions to simultaneously promote the fundamental steps and high anti-corrosion ability by revealing the local structure reconstruction as well as the integration in the practical application. We believe the current summarization will be instructive and helpful for the Ni-based powder catalysts development and understanding their catalytic action for urea-assisted hydrogen generation via water splitting technique.
Numerical Study on Thermodynamic Coupling Characteristics of Fluid Sloshing in a Liquid Hydrogen Tank for Heavy-Duty Trucks
Feb 2023
Publication
The large-amplitude sloshing behavior of liquid hydrogen in a tank for heavy-duty trucks may have adverse effects on the safety and stability of driving. With successful application of liquid hydrogen in the field of new energy vehicles the coupled thermodynamic performance during liquid hydrogen large-amplitude sloshing becomes more attractive. In this paper a three-dimensional numerical model is established to simulate the thermodynamic coupling characteristics during liquid hydrogen sloshing in a horizontal tank for heavy-duty trucks. The calculation results obtained by the developed model are in good agreement with experimental data for liquid hydrogen. Based on the established 3D model the large-amplitude sloshing behavior of liquid hydrogen under extreme acceleration as well as the effects of acceleration magnitude and duration on liquid hydrogen sloshing is numerically determined. The simulation results show that under the influence of liquid hydrogen large-amplitude sloshing the convective heat transfer of fluid in the tank is greatly strengthened resulting in a decrease in the vapor temperature and an increase in the liquid temperature. In particular the vapor condensation caused by the sloshing promotes a rapid reduction of pressure in the tank. When the acceleration magnitude is 5 g with a duration of 200 ms the maximum reduction of ullage pressure is 1550 Pa and the maximum growth of the force on the right wall is 3.89 kN. Moreover the acceleration magnitude and duration have a remarkable influence on liquid hydrogen sloshing. With the increase in acceleration magnitude or duration there is a larger sloshing amplitude for the liquid hydrogen. When the duration of acceleration is 200 ms compared with the situation at the acceleration magnitude of 5 g the maximum reductions of ullage pressure decrease by 9.46% and 55.02% and the maximum growth of forces on the right wall decrease by 80.57% and 99.53% respectively at 2 g and 0.5 g. Additionally when the acceleration magnitude is 5 g in contrast with the situation at a duration of acceleration of 200 ms the maximum-ullage-pressure drops decrease by 8.17% and 21.62% and the maximum increase in forces on the right wall decrease by 71.80% and 88.63% at 100 ms and 50 ms respectively. These results can provide a reference to the safety design of horizontal liquid hydrogen tanks for heavy-duty trucks.
Impact of Hydrogen on Natural Gas Compositions to Meet Engine Gas Quality Requirements
Oct 2022
Publication
To meet the target of reducing greenhouse gas emissions hydrogen as a carbon-free fuel is expected to play a major role in future energy supplies. A challenge with hydrogen is its low density and volumetric energy value meaning that large tanks are needed to store and transport it. By injecting hydrogen into the natural gas network the transportation issue could be solved if the hydrogen–natural gas mixture satisfies the grid gas quality requirements set by legislation and standards. The end consumers usually have stricter limitations on the gas quality than the grid where Euromot the European association of internal combustion engine manufacturers has specific requirements on the parameters: the methane number and Wobbe index. This paper analyses how much hydrogen can be added into the natural gas grid to fulfil Euromot’s requirements. An average gas composition was calculated based on the most common ones in Europe in 2021 and the results show that 13.4% hydrogen can be mixed with a gas consisting of 95.1% methane 3.2% ethane 0.7% propane 0.3% butane 0.3% carbon dioxide and 0.5% nitrogen. The suggested gas composition indicates for engine manufacturers how much hydrogen can be added into the gas to be suitable for their engines.
Metal-Hydride-Based Hydrogen Storage as Potential Heat Source for the Cold Start of PEM FC in Hydrogen-Powered Coaches: A Comparative Study of Various Materials and Thermal Management Techniques
Nov 2022
Publication
The successful and fast start-up of proton exchange membrane fuel cells (PEMFCs) at subfreezing temperatures (cold start) is very important for the use of PEMFCs as energy sources for automotive applications. The effective thermal management of PEMFCs is of major importance. When hydrogen is stored in hydride-forming intermetallics significant amounts of heat are released due to the exothermic nature of the reaction. This excess of heat can potentially be used for PEMFC thermal management and to accelerate the cold start. In the current work this possibility is extensively studied. Three hydride-forming intermetallics are introduced and their hydrogenation behavior is evaluated. In addition five thermal management scenarios of the metal hydride beds are studied in order to enhance the kinetics of the hydrogenation. The optimum combination of the intermetallic hydrogenation behavior weight and complexity of the thermal management system was chosen for the study of thermal coupling with the PEMFCs. A 1D GT-SUITE model was built to stimulate the thermal coupling of a 100 kW fuel cell stack with the metal hydride. The results show that the use of the heat from the metal hydride system was able to reduce the cold start by up to 8.2%.
Effect of State of Charge on Type IV Hydrogen Storage Tank Rupture in a Fire
Sep 2021
Publication
The use of hydrogen storage tanks at 100% of nominal working pressure NWP is expected only after refuelling. Driving between refuellings is characterised by the state of charge SoC<100%. There is experimental evidence that Type IV tanks tested in a fire at initial pressures below one-third of its NWP depending on a fire source were leaking without rupture. This paper aims at understanding this phenomenon and the development of a predictive model. The numerical research has demonstrated that the heat transfer from fire through the composite overwrap is sufficient to melt the polymer liner. This initiates hydrogen microleaks through the composite wall before it loses the load-bearing ability when the resin degrades deep enough to cause the tank to rupture. The dependence of tank fire-resistance rating (FRR) on the SoC is presented for tanks of volume in the range 36-244 L. The tank wall thickness non-uniformity i.e. thinner composite at the dome area is identified as a serious issue for tank’s fire resistance that must be addressed by tank manufacturers and OEMs. The effect of the burst pressure ratio on FRR is investigated. It is concluded that thermal parameters of the composite wall i.e. decomposition heat and temperatures play a vital role in simulations of tank failure and thus FRR.
Strategic Overview on Fuel Cell-Based Systems for Mobility and Electrolytic Cells for Hydrogen Production
Mar 2022
Publication
Given the global effort to embrace research actions and technology enhancement for the energy transition innovative sustainable systems are needed both for energy production and for those sectors that are responsible for high pollution and CO2 emissions. In this context electrolytic cells and fuel cells in their variety and flexibility are energy systems characterized by high efficiency and important performance guaranteeing a sustainable solution for future energy systems and for the circular economy. The scope of this paper is therefore to present the state of the art of such systems. An overview of the electrolyzers for hydrogen production is presented by detailing the level of applications for their different technologies from low-temperature units to high-temperature units the fuel flexibility the electrolysis and co-electrolysis mode and the potential coupling with renewable sources. Fuel cell-based systems are also presented and their application in the mobility sector is investigated by considering road transport with light-duty and heavy-duty applications and marine transport. A comparison with conventional technologies will be also presented providing some hints on the potential applications of electrolytic cells and fuel cell systems given their important contribution to the sustainable and circular economy.
Strategic Policy Targets and the Contribution of Hydrogen in a 100% Renewable European Power System
Jul 2021
Publication
The goal of the European energy policy is to achieve climate neutrality. The long-term energy strategies of various European countries include additional targets such as the diversification of energy sources maintenance of security of supply and reduction of import dependency. When optimizing energy systems these strategic policy targets are often only considered in a rudimentary manner and thus the understanding of the corresponding interdependencies is lacking. Moreover hydrogen is considered as a key component of a fully decarbonized energy system but its role in the power sector remains unclear due to the low round-trip efficiencies. This study reveals how fully decarbonized European power systems can benefit from hydrogen in terms of overall system costs and the achievement of strategic policy targets. We analyzed a broad spectrum of scenarios using an energy system optimization model and varied model constraints that reflect strategic policy targets. Our results are threefold. First compared to power systems without hydrogen systems using hydrogen realize savings of 14–16% in terms of the total system costs. Second the implementation of a hydrogen infrastructure reduces the number of infeasible scenarios when structural policy targets are considered within the power system. Third the role of hydrogen is highly diverse at a national level. Particularly in countries with low renewable energy potential hydrogen plays a crucial role. Here high levels of self-sufficiency and security of supply are achieved by deploying hydrogen-based power generation of up to 46% of their annual electricity demand realized via imports of green hydrogen.
Investigating Hydrogen-Based Non-Conventional Storage for PV Power in Eco-Energetic Optimization of a Multi-Energy System
Dec 2021
Publication
Through the integration of multiple energy carriers with related technologies multi-energy systems (MES) can exploit the synergies coming from their interplay for several benefits towards decarbonization. In such a context inclusion of Power-to-X technologies in periods of excess renewable electricity supply removes the need for curtailment of renewable electricity generation. In order to achieve the environmental benefits of MES without neglecting their economic feasibility the optimal design problem is as crucial as challenging and requires the adoption of a multi-objective approach. This paper extends the results of a previous work by investigating hydrogen-based non-conventional storage for PV power in the eco-energetic optimization of an MES. The system under study consists of a reversible fuel cell (r-SOC) photovoltaic (PV) electric heat pump absorption chiller and thermal storage and allows satisfying the multi-energy needs of a residential end-user. A multi-objective linear problem is established to find the optimal MES configuration including the sizes of the involved technologies with the goal of reducing the total annual cost and the fossil primary energy input. Simulation results are compared with those obtained in previous work with a conventional nanogrid where a combined heat and power (CHP) system with gas-fired internal combustion engine and a battery were present instead of an r-SOC. The optimized configuration of the non-conventional nanogrid allows achieving a maximum primary energy reduction amounting to 66.3% compared to the conventional nanogrid. In the face of the environmental benefits the non-conventional nanogrid leads to an increase in total annual costs which compared to the conventional nanogrid is in the range of 41–65%.
Spatiotemporal Analysis of Hydrogen Requirement to Minimize Seasonal Variability in Future Solar and Wind Energy in South Korea
Nov 2022
Publication
Renewable energy supply is essential for carbon neutrality; however technologies aiming to optimally utilize renewable energy sources remain insufficient. Seasonal variability in renewable energy is a key issue which many studies have attempted to overcome through operating systems and energy storage. Currently hydrogen is the only technology that can solve this seasonal storage problem. In this study the amount of hydrogen required to circumvent the seasonal variability in renewable energy supply in Korea was quantified. Spatiotemporal analysis was conducted using renewable energy resource maps and power loads. It was predicted that 50% of the total power demand in the future will be met using solar and wind power and a scenario was established based on the solar-to-wind ratio. It was found that the required hydrogen production differed by approximately four-times depending on the scenarios highlighting the importance of supplying renewable energy at an appropriate ratio. Spatially wind power was observed to be unsuitable for the physical transport of hydrogen because it has a high potential at mountain peaks and islands. The results of this study are expected to aid future hydrogen research and solve renewable energy variability problems.
Regional Uptake of Direct Reduction Iron Production Using Hydrogen Under Climate Policy
Nov 2022
Publication
The need to reduce CO2 emissions to zero by 2050 has meant an increasing focus on high emitting industrial sectors such as steel. However significant uncertainties remain as to the rate of technology diffusion across steel production pathways in different regions and how this might impact on climate ambition. Informed by empirical analysis of historical transitions this paper presents modelling on the regional deployment of Direction Reduction Iron using hydrogen (DRI-H2). We find that DRI-H2 can play a leading role in the decarbonisation of the sector leading to near-zero emissions by 2070. Regional spillovers from early to late adopting regions can speed up the rate of deployment of DRI-H2 leading to lower cumulative emissions and system costs. Without such effects cumulative emissions are 13% higher than if spillovers are assumed and approximately 15% and 20% higher in China and India respectively. Given the estimates of DRI-H2 cost-effectiveness relative to other primary production technologies we also find that costs increase in the absence of regional spillovers. However other factors can also have impacts on deployment emission reductions and costs including the composition of the early adopter group material efficiency improvements and scrap recycling rates. For the sector to achieve decarbonisation key regions will need to continue to invest in low carbon steel projects recognising their broader global benefit and look to develop and strengthen policy coordination on technologies such as DRI-H2.
Clean Technology Selection of Hydrogen Production on an Industrial Scale in Morocco
Nov 2022
Publication
Sustainable hydrogen production is a priority for Morocco and it’s part of the country’s national energy strategy which is currently being developed. Many processes can be used for its production. However it’s necessary to select the appropriate one for Morocco’s case. In this study a multi-criteria analysis was followed to select the best clean and renewable catalytic process for hydrogen production on an industrial scale. Ten routes were evaluated using the AHP method coupled with the Fuzzy Vikor method for criteria weighting and ranking of alternatives respectively. The results showed that alkaline water electrolysis coupled with renewable energy sources is the most suitable for industrial production in Morocco. The processes that are not well ranked and require further study and development before deployment on an industrial scale are biophotolysis photo fermentation photolysis and thermolysis. The parametric sensitivity analysis performed validated the result obtained. Then the potential for hydrogen production using solar energy is investigated. It was found that Morocco can produce 1057.26 million tons of green hydrogen showing how attractive the selected catalytic process is. This study enables investors and decision-makers to make an informed decision about whether to develop a green hydrogen production industrial installation in Morocco.
A Comprehensive Review on Recent Advancements in Thermochemical Processes for Clean Hydrogen Production to Decarbonize the Energy Sector
Sep 2022
Publication
Hydrogen is a source of clean energy as it can produce electricity and heat with water as a by-product and no carbon content is emitted when hydrogen is used as burning fuel in a fuel cell. Hydrogen is a potential energy carrier and powerful fuel as it has high flammability fast flame speed no carbon content and no emission of pollutants. Hydrogen production is possible through different technologies by utilizing several feedstock materials but the main concern in recent years is to reduce the emission of carbon dioxide and other greenhouse gases from energy sectors. Hydrogen production by thermochemical conversion of biomass and greenhouse gases has achieved much attention as researchers have developed several novel thermochemical methods which can be operated with low cost and high efficiency in an environmentally friendly way. This review explained the novel technologies which are being developed for thermochemical hydrogen production with minimum or zero carbon emission. The main concern of this paper was to review the advancements in hydrogen production technologies and to discuss different novel catalysts and novel CO2 -absorbent materials which can enhance the hydrogen production rate with zero carbon emission. Recent developments in thermochemical hydrogen production technologies were discussed in this paper. Biomass gasification and pyrolysis steam methane reforming and thermal plasma are promising thermochemical processes which can be further enhanced by using catalysts and sorbents. This paper also reviewed the developments and influences of different catalysts and sorbents to understand their suitability for continuous clean industrial hydrogen production.
A Simulated Roadmap of Hydrogen Technology Contribution to Climate Change Mitigation Based on Representative Concentration Pathways Considerations
Apr 2018
Publication
Hydrogen as fuel has been a promising technology toward climate change mitigation efforts. To this end in this paper we analyze the contribution of hydrogen technology to our future environmental goals. It is assumed that hydrogen is being produced in higher efficiency across time and this is simulated on Global Change Assessment Model (GCAM). The environmental restrictions applied are the expected emissions representative concentration pathways (RCP) 2.6 4.5 and 6.0. Our results have shown increasing hydrogen production as the environmental constraints become stricter and hydrogen more efficient in being produced. This increase has been quantified and provided on open access as Supporting Information to this manuscript.
Techno-Economic Analysis of Low Carbon Hydrogen Production from Offshore Wind Using Battolyser Technology
Aug 2022
Publication
A battolyser is a combined battery electrolyser in one unit. It is based on flow battery technology and can be adapted to produce hydrogen at a lower efficiency than an electrolyser but without the need for rare and expensive materials. This paper presents a method of determining if a battolyser connected to a wind farm makes economic sense based on stochastic modelling. A range of cost data and operational scenarios are used to establish the impact on the NPV and LCOE of adding a battolyser to a wind farm. The results are compared to adding a battery or an electrolyser to a wind farm. Indications are that it makes economic sense to add a battolyser or battery to a wind farm to use any curtailed wind with calculated LCOE at £56/MWh to £58/MWh and positive NPV over a range of cost scenarios. However electrolysers are still too expensive to make economic sense.
Progress and Challenges in Multi-stack Fuel Cell System for High Power Applications: Architecture and Energy Management
Jan 2023
Publication
With the development of fuel cells multi-stack fuel cell system (MFCS) for high power application has shown tremendous development potential owing to their obvious advantages including high efficiency durability reliability and pollution-free. Accordingly the state-of-the-art of MFCS is summarized and analyzed to advance its research. Firstly the MFCS applications are presented in high-power scenarios especially in transportation applications. Then to further investigate the MFCS MFCS including hydrogen and air subsystem thermal and water subsystem multi-stack architecture and prognostics and health monitoring are reviewed. It is noted that prognostics and health monitoring are investigated rarely in MFCS compared with previous research. In addition the efficiency and durability of MFCS are not only related to the application field and design principle but also the energy management strategy (EMS). The reason is that the EMS is crucial for lifespan cost and efficiency in the multi-stack fuel cell system. Finally the challenge and development potential of MFCS is proposed to provide insights and guidelines for future research.
Impacts of Wind Conditions on Hydrogen Leakage During Refilling Hydrogen-powered Vehicles
Mar 2023
Publication
Although hydrogen leakage at hydrogen refueling stations has been a concern less effort has been devoted to hydrogen leakage during the refueling of hydrogen-powered vehicles. In this study hydrogen leakage and dilution from the hydrogen dispenser during the refueling of hydrogen-powered vehicles were numerically investigated under different wind configurations. The shape size and distribution of flammable gas clouds (FGC) during the leakage and dilution processes were analyzed. The results showed that the presence of hydrogen-powered vehicles resulted in irregular FGC shapes. Greater wind speeds (vwv) were associated with longer FGC propagation distances. At vwv =2 m/s and 10 m/s the FGC lengths at the end of the leakage were 7.9 m and 20.4 m respectively. Under downwind conditions higher wind speeds corresponded to lower FGC heights. The FGC height was larger under upwind conditions and was slightly affected by the magnitude of the wind speed. In the dilution process the existence of a region with a high hydrogen concentration led to the FGC volume first increasing and then gradually decreasing. Wind promoted the mixing of hydrogen and air accelerated FGC dilution inhibited hydrogen uplifting and augmented the horizontal movement of the FGC. At higher wind speeds the low-altitude FGC movements could induce potential safety hazards.
Research on the Sealing Mechanism of Split-Liner High-Pressure Hydrogen Storage Cylinders
Mar 2024
Publication
Hydrogen storage is a crucial factor that limits the development of hydrogen energy. This paper proposes using a split liner for the inner structure of a hydrogen storage cylinder. A self-tightening seal is employed to address the sealing problem between the head and the barrel. The feasibility of this structure is demonstrated through hydraulic pressure experiments. The influence laws of the O-ring compression rate the distance from the straight edge section of the head to the sealing groove and the thickness of the head on the sealing performance of gas cylinders in this sealing structure are revealed using finite elements analysis. The results show that when the gas cylinder is subjected to medium internal pressure the maximum contact stress on the O-ring extrusion deformation sealing surface is greater than the medium pressure. There is sufficient contact width that is the arc length of the part where the stress on the O-ring contact surface is greater than the medium pressure so that it can form a good sealing condition. At the same time increasing the compression ratio of the O-ring and the head’s thickness will help improve the sealing performance and reducing the distance from the straight edge section of the head to the sealing groove will also improve the sealing performance.
Modeling of Unintended Hydrogen Releases from a Fuel Cell Tram
Sep 2021
Publication
Hydrogen is a promising alternative energy carrier that has been increasingly used in industry especially the transportation sector to fuel vehicles through fuel cells. Hydrogen fuel cell vehicles usually have high pressure on-board storage tanks which take up large spaces to provide comparable ranges as current fossil fuel vehicles because of the low volumetric energy density of hydrogen. Therefore hydrogen is also appropriate for large heavy-duty vehicles that have more space than passenger vehicles.
Far Off-shore Wind Energy-based Hydrogen Production: Technological Assessment and Market Valuation Designs
Jan 2020
Publication
This article provides a techno-economic study on coupled offshore wind farm and green hydrogen production via sea water electrolysis (OWF-H2). Offshore wind energy wind farms (OWF) and water electrolysis (WE) technologies are described. MHyWind (the tool used to perform simulations and optimisations of such plants) is presented as well as the models of the main components in the study. Three case studies focus on offshore wind farms either stand-alone or connected to the grid via export cables coupled with a battery and electrolysis systems either offshore or onshore. Exhaustive searches and optimisations performed allowed for rules of thumb to be derived on the sizing of coupled OWF-H2 plants that minimize costs of hydrogen production (LCoH2 in €/kgH2): Non-connected OWF-H2 coupled to a battery offers the lowest LCoH2 without the costs of H2 transportation when compared to cases where the WE is installed onshore and connected to the OWF. Using a simple power distribution heuristic increasing the number of installed WE allows the system to take advantage of more OWF energy but doesn’t improve plant efficiency whereas a battery always does. Finally within the scope of this study it is observed that power ratios of optimized plant architectures (leading to the lowest LCoH2) are between 0.8-0.9 for PWE/POWF and 0.3-0.35 for PBattery/POWF.
A Holistic Consideration of Megawatt Electrolysis as a Key Component of Sector Coupling
May 2022
Publication
In the future hydrogen (H2) will play a significant role in the sustainable supply of energy and raw materials to various sectors. Therefore the electrolysis of water required for industrial‐ scale H2 production represents a key component in the generation of renewable electricity. Within the scope of fundamental research work on cell components for polymer electrolyte membrane (PEM) electrolyzers and application‐oriented living labs an MW electrolysis system was used to further improve industrial‐scale electrolysis technology in terms of its basic structure and systems‐ related integration. The planning of this work as well as the analytical and technical approaches taken along with the essential results of research and development are presented herein. The focus of this study is the test facility for a megawatt PEM electrolysis stack with the presentation of the design processing and assembly of the main components of the facility and stack.
Enhanced Performance and Durability of Low Catalyst Loading PEM Water Electrolyser Based on a Short-side Chain Perfluorosulfonic Ionomer
Sep 2016
Publication
Water electrolysis supplied by renewable energy is the foremost technology for producing ‘‘green” hydrogen for fuel cell vehicles. In addition the ability to rapidly follow an intermittent load makes electrolysis an ideal solution for grid-balancing caused by differences in supply and demand for energy generation and consumption. Membrane-electrode assemblies (MEAs) designed for polymer electrolyte membrane (PEM) water electrolysis based on a novel short-side chain (SSC) perfluorosulfonic acid (PFSA) membrane Aquivion with various cathode and anode noble metal loadings were investigated in terms of both performance and durability. Utilizing a nanosized Ir0.7Ru0.3O solid solution anode catalyst and a supported Pt/C cathode catalyst in combination with the Aquivion membrane gave excellent electrolysis performances exceeding 3.2 A cm-2 at 1.8 V terminal cell voltage ( 80% efficiency) at 90 ºC in the presence of a total catalyst loading of 1.6 mg cm−2. A very small loss of efficiency corresponding to 30 mV voltage increase was recorded at 3 A cm 2 using a total noble metal catalyst loading of less than 0.5 mg cm−2 (compared to the industry standard of 2 mg cm−2). Steady-state durability tests carried out for 1000 h at 1 A cm -2 showed excellent stability for the MEA with total noble metal catalyst loading of 1.6 mg cm−2 (cell voltage increase 5 lV/h). Moderate degradation rate (cell voltage increase 15 lV/h) was recorded for the low loading 0.5 mg cm-2 MEA. Similar stability characteristics were observed in durability tests at 3 A cm−2. These high performance and stability characteristics were attributed to the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the Ir and Ru oxide solid solution and the enrichment of Ir species on the surface for the anodic catalyst.
Direct Numerical Simulation of Hydrogen Combustion at Auto-ignitive Conditions Ignition, Stability and Turbulent Reaction-front Velocity
Mar 2021
Publication
Direct Numerical Simulations (DNS) are performed to investigate the process of spontaneous ignition of hydrogen flames at laminar turbulent adiabatic and non-adiabatic conditions. Mixtures of hydrogen and vitiated air at temperatures representing gas-turbine reheat combustion are considered. Adiabatic spontaneous ignition processes are investigated first providing a quantitative characterization of stable and unstable flames. Results indicate that in hydrogen reheat combustion compressibility effects play a key role in flame stability and that unstable ignition and combustion are consistently encountered for reactant temperatures close to the mixture’s characteristic crossover temperature. Furthermore it is also found that the characterization of the adiabatic processes is also valid in the presence of non-adiabaticity due to wall heat-loss. Finally a quantitative characterization of the instantaneous fuel consumption rate within the reaction front is obtained and of its ability at auto-ignitive conditions to advance against the approaching turbulent flow of the reactants for a range of different turbulence intensities temperatures and pressure levels.
Scaling Factors for Channel Width Variations in Tree-like Flow Field Patterns for Polymer Electrolyte Membrane Fuel Cells - An Experimental Study
Apr 2021
Publication
To have a uniform distribution of reactants is an advantage to a fuel cell. We report results for such a distributor with tree-like flow field plates (FFP). Numerical simulations have shown that the width scaling parameters of tree-like patterns in FFPs used in polymer electrolyte membrane fuel cells (PEMFC) reduces the viscous dissipation in the channels. In this study experimental investigations were conducted on a 2-layer FF plate possessing a tree-like FF pattern which was CNC milled on high-quality graphite. Three FF designs of different width scaling parameters were employed. I–V curves power curves and impedance spectra were generated at 70% 60% and 50% relative humidity (25 cm2 active area) and compared to those obtained from a conventional 1-channel serpentine FF. It was found that the FF design with a width scaling factor of 0.917 in the inlet and 0.925 in the outlet pattern exhibited the best peak power out of the three designs (only 11% - 0.08 W/cm2 lower than reference serpentine FF). Results showed that a reduction of the viscous dissipation in the flow pattern was not directly linked to a PEMFC performance increase. It was found that water accumulation together with a slight increase in single PEMFC resistance were the main reasons for the reduced power density. As further improvements a reduction of the number of branching generation levels and width scaling factor were recommended.
Green Synthesis of Olefin-linked Covalent Organic Frameworks for Hydrogen Fuel Cell Applications
Mar 2021
Publication
Green synthesis of crystalline porous materials for energy-related applications is of great significance but very challenging. Here we create a green strategy to fabricate a highly crystalline olefin-linked pyrazine-based covalent organic framework (COF) with high robustness and porosity under solvent-free conditions. The abundant nitrogen sites high hydrophilicity and well-defined one-dimensional nanochannels make the resulting COF an ideal platform to confine and stabilize the H3PO4 network in the pores through hydrogen-bonding interactions. The resulting material exhibits low activation energy (Ea) of 0.06 eV and ultrahigh proton conductivity across a wide relative humidity (10–90 %) and temperature range (25–80 °C). A realistic proton exchange membrane fuel cell using the olefin-linked COF as the solid electrolyte achieve a maximum power of 135 mW cm−2 and a current density of 676 mA cm−2 which exceeds all reported COF materials.
Hydrogen Projects Database – Analysis
Jun 2020
Publication
The IEA produced this dataset as part of efforts to track advances in low-carbon hydrogen technology. It covers all projects commissioned worldwide since 2000 to produce hydrogen for energy or climate-change-mitigation purposes. It includes projects which their objective is either to reduce emissions associated with producing hydrogen for existing applications or to use hydrogen as an energy carrier or industrial feedstock in new applications that have the potential to be a low-carbon technology. Projects in planning or construction are also covered.
Link to Download Database from IEA Website
Link to Download Database from IEA Website
Electric Field Effects on Photoelectrochemical Water Splitting: Perspectives and Outlook
Feb 2022
Publication
The grand challenges in renewable energy lie in our ability to comprehend efficient energy conversion systems together with dealing with the problem of intermittency via scalable energy storage systems. Relatively little progress has been made on this at grid scale and two overriding challenges still need to be addressed: (i) limiting damage to the environment and (ii) the question of environmentally friendly energy conversion. The present review focuses on a novel route for producing hydrogen the ultimate clean fuel from the Sun and renewable energy source. Hydrogen can be produced by light-driven photoelectrochemical (PEC) water splitting but it is very inefficient; rather we focus here on how electric fields can be applied to metal oxide/water systems in tailoring the interplay with their intrinsic electric fields and in how this can alter and boost PEC activity drawing both on experiment and non-equilibrium molecular simulation.
Analysis of the Polish Hydrogen Strategy in the Context of the EU’s Strategic Documents on Hydrogen
Oct 2021
Publication
In December 2019 the European Commission unveiled an ambitious project the European Green Deal which aims to lead the European Union to climate neutrality by 2050. This is a significant challenge for all EU countries and especially for Poland. The role of hydrogen in the processes of decarbonization of the economy and transport is being discussed in many countries around the world to find rational solutions to this difficult and complex problem. There is an ongoing discussion about the hydrogen economy which covers the production of hydrogen its storage transport and conversion to the desired forms of energy primarily electricity mechanical energy and new fuels. The development of the hydrogen economy can significantly support the achievement of climate neutrality. The belief that hydrogen plays an important role in the transformation of the energy sector is widespread. There are many technical and economic challenges as well as legal and logistical barriers to deal with in the transition process. The development of hydrogen technologies and a global sustainable energy system that uses hydrogen offers a real opportunity to solve the challenges facing the global energy industry: meeting the need for clean fuels increasing the efficiency of fuel and energy production and significantly reducing greenhouse gas emissions. The paper provides an in-depth analysis of the Polish Hydrogen Strategy a document that sets out the directions for the development of hydrogen use (competences and technologies) in the energy transport and industrial sectors. This analysis is presented against the background of the European Commission’s document ‘A Hydrogen Strategy for a Climate-Neutral Europe’. The draft project presented is a good basis for further discussion on the directions of development of the Polish economy. The Polish Hydrogen Strategy although it was created later than the EU document does not fully follow its guidelines. The directions for further work on the hydrogen strategy are indicated so that its final version can become a driving force for the development of the country’s economy.
Hydrogen Production in Methane Decomposition Reactor Using Solar Thermal Energy
Nov 2021
Publication
This study investigates the decomposition of methane using solar thermal energy as a heat source. Instead of the direct thermal decomposition of the methane at a temperature of 1200 ◦C or higher a catalyst coated with carbon black on a metal foam was used to lower the temperature and activation energy required for the reaction and to increase the yield. To supply solar heat during the reaction a reactor suitable for a solar concentrating system was developed. In this process a direct heating type reactor with quartz was initially applied and a number of problems were identified. An indirect heating type reactor with an insulated cavity and a rotating part was subsequently developed followed by a thermal barrier coating application. Methane decomposition experiments were conducted in a 40 kW solar furnace at the Korea Institute of Energy Research. Conversion rates of 96.7% and 82.6% were achieved when the methane flow rate was 20 L/min and 40 L/min respectively.
H21 Phase 2: Personal Protective Equipment
Dec 2020
Publication
This report is a detailed discussion related to safety shoes heat and flame personal protective equipment (PPE) and breathing apparatus (respiratory protective equipment RPE) required for working with natural gas (NG) and hydrogen (H2). This work was undertaken by HSE Science Division (SD) as part of Phase 2a of the H21 project. This report should be read alongside all the other relevant reports generated as part of this project. Recommendations made in this report are focused solely on the provision and use of PPE and should not be considered independently of recommendations made in the other relevant reports.<br/>Understanding the similarities and difference of PPE required for NG and H2 enables a deeper understanding of how the transition from NG to 100% H2 might change the way the gas distribution network is operated and managed.
Demand Side Management Based Power-to-Heat and Power-to-Gas Optimization Strategies for PV and Wind Self-Consumption in a Residential Building Cluster
Oct 2021
Publication
The volatility of renewable energy sources (RES) poses a growing problem for operation of electricity grids. In contrary the necessary decarbonisation of sectors such as heat supply and transport requires a rapid expansion of RES. Load management in the context of power-to-heat systems can help to simultaneously couple the electricity and heat sectors and stabilise the electricity grid thus enabling a higher share of RES. In addition power-to-hydrogen offers the possibility of long-term energy storage options. Within this work we present a novel optimization approach for heat pump operation with the aim to counteract the volatility and enable a higher usage of RES. For this purpose a detailed simulation model of buildings and their energy supply systems is created calibrated and validated based on a plus energy settlement. Subsequently the potential of optimized operation is determined with regard to PV and small wind turbine self-consumption. In addition the potential of seasonal hydrogen storage is examined. The results show that on a daily basis a 33% reduction of electricity demand from grid is possible. However the average optimization potential is reduced significantly by prediction inaccuracy. The addition of a hydrogen system for seasonal energy storage basically eliminates the carbon dioxide emissions of the cluster. However this comes at high carbon dioxide prevention costs of 1.76 e kg−1 .
Relevance of Optimized Low-Scale Green H2 Systems in a French Context: Two Case Studies
May 2022
Publication
Hydrogen has been identified as a very promising vector for energy storage especially for heavy mobility applications. For this reason France is making significant investments in this field and use cases need to be evaluated as they are sprouting. In this paper the relevance of H2 in two storage applications is studied: a domestic renewable electricity production system connected to the grid and a collective hydrogen production for the daily bus refill. The investigation consists of the sizing of the system and then the evaluation of its performance according to several criteria depending on case. Optimizations are made using Bayesian and gradient-based methods. Several variations around a central case are explored for both cases to give insights on the impact of the different parameters (location pricing objective etc.) on the performance of the system.Our results show that domestic power-to-power applications (case 1) do not seem to be competitive with electrochemical storage. Meanwhile without any subsidies or incentives such configuration does not allow prosumers to save money (+16% spendings compared to non-equipped dwelling). It remains interesting when self-sufficiency is the main objective (up to 68% of energy is not exchanged). The power-to-gas application (case 2 central case) with a direct use of hydrogen for mobility seems to be more relevant according to our case study we could reach a production cost of green H2 around 5 €/kg similar to the 3–10 $/kg found in literature for 182 houses involved. In both cases H2 follows a yearly cycle charging in summer and discharging in winter (long term storage) due to low conversion efficiency.
Green Hydrogen: A New Flexibility Source for Security Constrained Scheduling of Power Systems with Renewable Energies
Apr 2021
Publication
Green hydrogen i.e. the hydrogen generated from renewable energy sources (RES) will significantly contribute to a successful energy transition. Besides to facilitate the integration and storage of RES this promising energy carrier is well capable to efficiently link various energy sectors. By introduction of green hydrogen as a new flexibility source to power systems it is necessary to investigate its possible impacts on the generation scheduling and power system security. In this paper a security-constrained multi-period optimal power flow (SC-MPOPF) model is developed aiming to determine the optimal hourly dispatch of generators as well as power to hydrogen (P2H) units in the presence of large-scale renewable energy sources (RES). The proposed model characterizes the P2H demand flexibility in the proposed SC-MPOPF model taking into account the electrolyzer behavior reactive power support of P2H demands and hydrogen storage capability. The developed SC-MPOPF model is applied to IEEE 39-bus system and the obtained numerical results demonstrate the role of P2H flexibility on cost as well as RES's power curtailment reduction.
A Production and Delivery Model of Hydrogen from Solar Thermal Energy in the United Arab Emirates
May 2022
Publication
Hydrogen production from surplus solar electricity as energy storage for export purposes can push towards large-scale application of solar energy in the United Arab Emirates and the Middle East region; this region’s properties of high solar irradiance and vast empty lands provide a good fit for solar technologies such as concentrated solar power and photovoltaics. However a thorough comparison between the two solar technologies as well as investigating the infrastructure of the United Arab Emirates for a well-to-ship hydrogen pathway is yet to be fully carried out. Therefore in this study we aim to provide a full model for solar hydrogen production and delivery by evaluating the potential of concentrated solar power and photovoltaics in the UAE then comparing two different pathways for hydrogen delivery based on the location of hydrogen production sites. A Solid Oxide Cell Electrolyzer (SOEC) is used for technical comparison while the shortest routes for hydrogen transport were analyzed using Geographical Information System (GIS). The results show that CSP technology coupled with SOEC is the most favorable pathway for large-scale hydrogen from solar energy production in the UAE for export purposes. Although PV has a slightly higher electricity potential compared to CSP around 42 GWh/km2 to 41.1 GWh/km2 respectively CSP show the highest productions rates of over 6 megatons of hydrogen when the electrolyzer is placed at the same site as the CSP plant while PV generates 5.15 megatons when hydrogen is produced at the same site with PV plants; meanwhile hydrogen from PV and CSP shows similar levels of 4.8 and 4.6 megatons of hydrogen respectively when electrolyzers are placed at port sites. Even considering the constraints in the UAE’s infrastructure and suggesting new shorter electrical transmission lines that could save up to 0.1 megatons of hydrogen in the second pathway production at the same site with CSP is still the most advantageous scenario.
Insights into the Principles, Design Methodology and Applications of Electrocatalysts Towards Hydrogen Evolution Reaction
Apr 2021
Publication
The electrolysis of water for sustainable hydrogen producing is a crucial segment of various emerging clean-energy technologies. However pursuing an efficient and cheap alternative catalyst to substitute state-of-the-art platinum-group electrocatalysts remains a prerequisite for the commercialization of this technology. Typically precious-metal-free catalysts have always much lower activities towards hydrogen production than that of Pt-group catalysts. To explore high-performance catalysts maximally exposed active sites rapid charge transfer ability and desirable electronic configuration are essentially demanded. Herein the fundamentals of hydrogen evolution reaction will be briefly described and the main focus will be on the interfacial engineering strategies by means of constructing defect structure creating heterojunction phase engineering lattice strain control designing hierarchical architecture and doping heteroatoms to effectively proliferate the catalytic active sites facilitate the electron diffusion and regulate the electronic configuration of numerous transition metals and their nitrides carbides sulfides phosphides as well as oxides achieving a benchmark performance of platinum-free electrocatalysts for the hydrogen evolution reaction. This review unambiguously offers proof that the conventional cheap and earth-abundant transition metal-based substances can be translated into an active water splitting catalyst by the rational and controllable interfacial designing.
Sector Coupling via Hydrogen to Lower the Cost of Energy System Decarbonization
Aug 2021
Publication
There is growing interest in using hydrogen (H2) as a long-duration energy storage resource in a future electric grid dominated by variable renewable energy (VRE) generation. Modeling H2 use exclusively for grid-scale energy storage often referred to as ‘‘power-to-gas-to-power (P2G2P)’’ overlooks the cost-sharing and CO2 emission benefits from using the deployed H2 assets to decarbonize other end-use sectors where direct electrification is challenging. Here we develop a generalized framework for co-optimizing infrastructure investments across the electricity and H2 supply chains accounting for the spatio-temporal variations in energy demand and supply. We apply this sector-coupling framework to the U.S. Northeast under a range of technology cost and carbon price scenarios and find greater value of power-to-H2 (P2G) vs. P2G2P routes. Specifically P2G provides grid flexibility to support VRE integration without the round-trip efficiency penalty and additional cost incurred by P2G2P routes. This form of sector coupling leads to: (a) VRE generation increase by 13–56% and (b) total system cost (and levelized costs of energy) reduction by 7–16% under deep decarbonization scenarios. Both effects increase as H2 demand for other end-uses increases more than doubling for a 97% decarbonization scenario as H2 demand quadruples. We also find that the grid flexibility enabled by sector coupling makes deployment of carbon capture and storage (CCS) for power generation less cost-effective than its use for low-carbon H2 production. These findings highlight the importance of using an integrated energy system framework with multiple energy vectors in planning cost-effective energy system decarbonization
The Potential Role of Ammonia as Marine Fuel—Based on Energy Systems Modeling and Multi-Criteria Decision Analysis
Apr 2020
Publication
To reduce the climate impact of shipping the introduction of alternative fuels is required. There is a range of different marine fuel options but ammonia a potential zero carbon fuel has recently received a lot of attention. The purpose of this paper is to assess the prospects for ammonia as a future fuel for the shipping sector in relation to other marine fuels. The assessment is based on a synthesis of knowledge in combination with: (i) energy systems modeling including the cost-effectiveness of ammonia as marine fuel in relation to other fuels for reaching global climate targets; and (ii) a multi-criteria decision analysis (MCDA) approach ranking marine fuel options while considering estimated fuel performance and the importance of criteria based on maritime stakeholder preferences. In the long-term and to reach global GHG reduction the energy systems modeled indicate that the use of hydrogen represents a more cost-effective marine fuel option than ammonia. However in the MCDA covering more aspects we find that ammonia may be almost as interesting for shipping related stakeholders as hydrogen and various biomass-based fuels. Ammonia may to some extent be an interesting future marine fuel option but many issues remain to be solved before large-scale introduction.
Hydrogenation Production via Chemical Looping Reforming of Coke Oven Gas
Jun 2020
Publication
Coke oven gas (COG) is one of the most important by-products in the steel industry and the conversion of COG to value-added products has attracted much attention from both economic and environmental views. In this work we apply the chemical looping reforming technology to produce pure H2 from COG. A series of La1-xSrxFeO3 (x = 0 0.2 0.3 0.4 0.5 0.6) perovskite oxides were prepared as oxygen carriers for this purpose. The reduction behaviours of La1-xSrxFeO3 perovskite by different reducing gases (H2 CO CH4 and the mixed gases) are investigated to discuss the competition effect of different components in COG for reacting with the oxygen carriers. The results show that reduction temperatures of H2 and CO are much lower than that of CH4 and high temperatures (>800 °C) are requested for selective oxidation of methane to syngas. The co-existence of CO and H2 shows weak effect on the equilibrium of methane conversion at high temperatures but the oxidation of methane to syngas can inhibit the consumption of CO and H2. The doping of suitable amounts of Sr in LaFeO3 perovskite (e.g. La0.5Sr0.5FeO3) significantly promotes the reactivity for selective oxidation of methane to syngas and inhibits the formation of carbon deposition obtaining both high methane conversion in the COG oxidation step and high hydrogen yield in the water splitting step. The La0.5Sr0.5FeO3 shows the highest methane conversion (67.82%) hydrogen yield (3.34 mmol·g-1) and hydrogen purity (99.85%). The hydrogen yield in water splitting step is treble as high as the hydrogen consumption in reduction step. These results reveal that chemical looping reforming of COG to produce pure H2 is feasible and an O2-assistant chemical looping reforming process can further improve the redox stability of oxygen carrier.
The Effect of a Nuclear Baseload in a Zero-carbon Electricity System: An Analysis for the UK
Jan 2023
Publication
This paper explores the effect of having a nuclear baseload in a 100% carbon-free electricity system The study analyses numerous 8 scenarios based on different penetrations of conventional nuclear wind and solar PV power different levels of overgeneration 9 and different combinations between medium and long duration energy stores (hydrogen and compressed air respectively) to 10 determine the configuration that achieves the lowest total cost of electricity (TCoE). 11 At their current cost new baseload nuclear power plants are too expensive. Results indicate the TCoE is minimised when demand 12 is supplied entirely by renewables with no contribution from conventional nuclear. 13 However small modular reactors may achieve costs of ~£60/MWh (1.5x current wind cost) in the future. With such costs 14 supplying ~80% of the country’s electricity demand with nuclear power could minimise the TCoE. In this scenario wind provides 15 the remaining 20% plus a small percentage of overgeneration (~2.5%). Hydrogen in underground caverns provides ~30.5 TWh (81 16 days) of long-duration energy storage while CAES systems provide 2.8 TWh (~8 days) of medium-duration storage. This 17 configuration achieves costs of ~65.8 £/MWh. Batteries (required for short duration imbalances) are not included in the figure. 18 The TCoE achieved will be higher once short duration storage is accounted for.
Efficient Plasma Technology for the Production of Green Hydrogen from Ethanol and Water
Apr 2022
Publication
This study concerns the production of hydrogen from a mixture of ethanol and water. The process was conducted in plasma generated by a spark discharge. The substrates were introduced in the liquid phase into the reactor. The gaseous products formed in the spark reactor were hydrogen carbon monoxide carbon dioxide methane acetylene and ethylene. Coke was also produced. The energy efficiency of hydrogen production was 27 mol(H2 )/kWh and it was 36% of the theoretical energy efficiency. The high value of the energy efficiency of hydrogen production was obtained with relatively high ethanol conversion (63%). In the spark discharge it was possible to conduct the process under conditions in which the ethanol conversion reached 95%. However this entailed higher energy consumption and reduced the energy efficiency of hydrogen production to 8.8 mol(H2 )/kWh. Hydrogen production increased with increasing discharge power and feed stream. However the hydrogen concentration was very high under all tested conditions and ranged from 57.5 to 61.5%. This means that the spark reactor is a device that can feed fuel cells the power load of which can fluctuate.
Cotton Stalk Activated Carbon-supported Co–Ce–B Nanoparticles as Efficient Catalysts for Hydrogen Generation Through Hydrolysis of Sodium Borohydride
Nov 2019
Publication
Porous cotton stalk activated carbons (CSAC) were prepared by phosphoric acid activation of cotton stalks in a fluidized bed. The CSAC-supported Co–B and Co–Ce–B catalysts were prepared by the impregnation-chemical reduction method. The samples were characterized by the nitrogen adsorption XRD FTIR and TEM measurements. The effects of the sodium borohydride (NaBH4) and sodium hydroxide (NaOH) concentrations reaction temperature and recyclability on the rate of NaBH4 hydrolysis over the CSAC-supported Co–Ce–B catalysts were systematically investigated. The results showed that the agglomeration of the Co–Ce–B nanoclusters on the CSAC support surface was significantly reduced with the introduction of cerium. The CSAC-supported Co–Ce–B catalyst exhibited superior catalytic activity and the average hydrogen generation rate was 16.42 L min−1 g−1 Co at 25°C which is higher than the most reported cobalt-based catalysts. The catalytic hydrolysis of NaBH4 was zero order with respect to the NaBH4 concentration and the hydrogen generation rate decreased with the increase in the NaOH concentration. The activation energy of the hydrogen generation reaction on the prepared catalyst was estimated to be 48.22 kJ mol−1. A kinetic rate equation was also proposed.
JRC Reference Data from Experiments of Onboard Hydrogen Tanks Fast Filling
Sep 2013
Publication
At the JRC-IET on-board hydrogen tanks have been subjected to filling–emptying cycles to investigate their long-term mechanical and thermal behaviour and their safety performance. The local temperature history inside the tanks has been measured and compared with the temperatures outside and at the tank metallic bosses which is the measurement location identified by some standards. The outcome of these activities is a set of experimental data which will be made publicly available as reference for safety studies and validation of computational fluid dynamics.
Examining the Role of Safety in Communication Concerning Emerging Hydrogen Technologies by Selected Groups of Stakeholders
Sep 2021
Publication
Governments and other stakeholders actively promote and facilitate the development and deployment of hydrogen and fuel cell technologies. Various strategy documents and energy forecasts outline the environmental and societal benefits of the prospective hydrogen economy. At the same time the safety related properties of hydrogen imply that it is not straightforward to achieve and document the same level of safety for hydrogen systems compared to conventional fuels. Severe accidents can have major impact on the development of energy technologies. The stakes will increase significantly as the use of hydrogen shifts from controlled environments in industrial facilities to the public domain and as the transport-related consumption extends from passenger cars and buses to trains ships and airplanes. Widespread deployment of hydrogen as an energy carrier in society will require massive investments. This implies commercial and political commitment involvement and influence on research priorities and decision-making. The legacy from accidents and the messages communicated by influential stakeholders impact not only how the public perceives hydrogen technologies but also governmental policies the development of regulations codes and standards (RCS) and ultimately the measures adopted for preventing and mitigating accidents. This paper explores whether and how selected aspects of safety are considered when distinct groups of stakeholders frame the hydrogen economy. We assess to what extent the communication is consistent with the current state-of-the-art in hydrogen safety and the contemporary strength of knowledge in risk assessments for hydrogen systems. The approach adopted entails semi-quantitative text analysis and close reading to highlight variations between diverse groups of stakeholders. The results indicate a bias in the framing of the safety-related aspects of the hydrogen economy towards procedural organisational and societal measures of risk reduction at the expense of well-known challenges and knowledge gaps associated with the implications of fundamental safety-related properties of hydrogen.
Green Hydrogen and Energy Transition: Current State and Prospects in Portugal
Jan 2023
Publication
Hydrogen is a promising commodity a renewable secondary energy source and feedstock alike to meet greenhouse gas emissions targets and promote economic decarbonization. A common goal pursued by many countries the hydrogen economy receives a blending of public and private capital. After European Green Deal state members created national policies focused on green hydrogen. This paper presents a study of energy transition considering green hydrogen production to identify Portugal’s current state and prospects. The analysis uses energy generation data hydrogen production aspects CO2 emissions indicators and based costs. A comprehensive simulation estimates the total production of green hydrogen related to the ratio of renewable generation in two different scenarios. Then a comparison between EGP goals and Portugal’s transport and energy generation prospects is made. Portugal has an essential renewable energy matrix that supports green hydrogen production and allows for meeting European green hydrogen 2030–2050 goals. Results suggest that promoting the conversion of buses and trucks into H2-based fuel is better for CO2 reduction. On the other hand given energy security thermoelectric plants fueled by H2 are the best option. The aggressive scenario implies at least 5% more costs than the moderate scenario considering economic aspects.
Water Electrolysis for the Production of Hydrogen to Be Employed in the Ironmaking and Steelmaking Industry
Nov 2021
Publication
The way to decarbonization will be characterized by the huge production of hydrogen through sustainable routes. Thus the basic production way is water electrolysis sustained by renewable energy sources allowing for obtaining “green hydrogen”. The present paper reviews the main available technologies for the water electrolysis finalized to the hydrogen production. We describe the fundamental of water electrolysis and the problems related to purification and/or desalinization of water before electrolysis. As a matter of fact we describe the energy efficiency issues with particular attention to the potential application in the steel industry. The fundamental aspects related to the choice of high-temperature or low-temperature technologies are analyzed.
Use of Hydrogen as Fuel: A Trend of the 21st Century
Jan 2022
Publication
The unbridled use of fossil fuels is a serious problem that has become increasingly evident over the years. As such fuels contribute considerably to environmental pollution there is a need to find new sustainable sources of energy with low emissions of greenhouse gases. Climate change poses a substantial challenge for the scientific community. Thus the use of renewable energy through technologies that offer maximum efficiency with minimal pollution and carbon emissions has become a major goal. Technology related to the use of hydrogen as a fuel is one of the most promising solutions for future systems of clean energy. The aim of the present review was to provide an overview of elements related to the potential use of hydrogen as an alternative energy source considering its specific chemical and physical characteristics as well as prospects for an increase in the participation of hydrogen fuel in the world energy matrix.
Industrial Energy Use and Carbon Emissions Reduction in the Chemicals Sector: A UK Perspective
Aug 2017
Publication
The opportunities and challenges to reducing industrial energy demand and carbon dioxide (CO2 ) emissions in the Chemicals sector are evaluated with a focus on the situation in the United Kingdom (UK) although the lessons learned are applicable across much of the industrialised world. This sector can be characterised as being heterogeneous; embracing a diverse range of products (including advanced materials cleaning fluids composites dyes paints pharmaceuticals plastics and surfactants). It sits on the boundary between energy-intensive (EI) and non-energy-intensive (NEI) industrial sectors. The improvement potential of various technological interventions has been identified in terms of their energy use and greenhouse gas (GHG) emissions. Currently-available best practice technologies (BPTs) will lead to further short-term energy and CO2 emissions savings in chemicals processing but the prospects for the commercial exploitation of innovative technologies by mid-21st century are far more speculative. A set of industrial decarbonisation ‘technology roadmaps’ out to the mid-21st Century are also reported based on various alternative scenarios. These yield low-carbon transition pathways that represent future projections which match short-term and long-term (2050) targets with specific technological solutions to help meet the key energy saving and decarbonisation goals. The roadmaps’ contents were built up on the basis of the improvement potentials associated with various processes employed in the chemicals industry. They help identify the steps needed to be undertaken by developers policy makers and other stakeholders in order to ensure the decarbonisation of the UK chemicals industry. The attainment of significant falls in carbon emissions over this period will depends critically on the adoption of a small number of key technologies [e.g. carbon capture and storage (CCS) energy efficiency techniques and bioenergy] alongside a decarbonisation of the electricity supply.
Use of Hydrogen in Off-Grid Locations, a Techno-Economic Assessment
Nov 2018
Publication
Diesel generators are currently used as an off-grid solution for backup power but this causes CO2 and GHG emissions noise emissions and the negative effects of the volatile diesel market influencing operating costs. Green hydrogen production by means of water electrolysis has been proposed as a feasible solution to fill the gaps between demand and production the main handicaps of using exclusively renewable energy in isolated applications. This manuscript presents a business case of an off-grid hydrogen production by electrolysis applied to the electrification of isolated sites. This study is part of the European Ely4off project (n◦ 700359). Under certain techno-economic hypothesis four different system configurations supplied exclusively by photovoltaic are compared to find the optimal Levelized Cost of Electricity (LCoE): photovoltaic-batteries photovoltaic-hydrogen-batteries photovoltaic-diesel generator and diesel generator; the influence of the location and the impact of different consumptions profiles is explored. Several simulations developed through specific modeling software are carried out and discussed. The main finding is that diesel-based systems still allow lower costs than any other solution although hydrogen-based solutions can compete with other technologies under certain conditions.
The Use of Hydrogen to Separate and Recycle Neodymium–iron–boron-type Magnets from Electronic Waste
May 2015
Publication
The rare earth metals have been identified by the European Union and the United States as being at greatest supply risk of all the materials for clean energy technologies. Of particular concern are neodymium and dysprosium both of which are employed in neodymium–iron–boron based magnets. Recycling of magnets based on these materials and contained within obsolete electronic equipment could provide an additional and secure supply. In the present work hydrogen has been employed as a processing agent to decrepitate sintered neodymium–iron–boron based magnets contained within hard disk drives into a demagnetised hydrogenated powder. This powder was then extracted mechanically from the devices with an extraction efficiency of 90 ± 5% and processed further using a combination of sieves and ball bearings to produce a powder containing <330 parts per million of nickel contamination. It is then possible for the extracted powder to be re-processed in a number of ways namely directly by blending and re-sintering to form fully dense magnets by Hydrogenation Disproportionation Desorption Recombination processing to produce an anisotropic coercive powder suitable for bonded magnets by re-melting; or by chemical extraction of the rare earth elements from the alloy. For example it was shown that by the re-sintering route it was possible to recover >90% of the magnetic properties of the starting material with significantly less energy than that employed in primary magnet production. The particular route used will depend upon the magnetic properties required the level of contamination of the extracted material and the compositional variation of the feedstock. The various possibilities have been summarised in a flow diagram.
Optimal Design of Multi-energy Systems with Seasonal Storage
Oct 2017
Publication
Optimal design and operation of multi-energy systems involving seasonal energy storage are often hindered by the complexity of the optimization problem. Indeed the description of seasonal cycles requires a year-long time horizon while the system operation calls for hourly resolution; this turns into a large number of decision variables including binary variables when large systems are analyzed. This work presents novel mixed integer linear program methodologies that allow considering a year time horizon with hour resolution while significantly reducing the complexity of the optimization problem. First the validity of the proposed techniques is tested by considering a simple system that can be solved in a reasonable computational time without resorting to design days. Findings show that the results of the proposed approaches are in good agreement with the full-scale optimization thus allowing to correctly size the energy storage and to operate the system with a long-term policy while significantly simplifying the optimization problem. Furthermore the developed methodology is adopted to design a multi-energy system based on a neighborhood in Zurich Switzerland which is optimized in terms of total annual costs and carbon dioxide emissions. Finally the system behavior is revealed by performing a sensitivity analysis on different features of the energy system and by looking at the topology of the energy hub along the Pareto sets.
Reduction of Maritime GHG Emissions and the Potential Role of E-fuels
Nov 2021
Publication
Maritime transport accounts for around 3% of global anthropogenic Greenhouse gas (GHG) emissions (Well-to-Wake) and these emissions must be reduced with at least 50% in absolute values by 2050 to contribute to the ambitions of the Paris agreement (2015). Zero carbon fuels made from renewable sources (hydro wind or solar) are by many seen as the most promising option to deliver the desired GHG reductions. For the maritime sector these fuels come in two forms: First as E-Hydrogen or E-Ammonia; Second as Hydrocarbon E-fuels in the form of E-Diesel E-LNG or E-Methanol. We evaluate emissions energy use and cost for E-fuels and find that the most robust path to these fuels is through dual-fuel engines and systems to ensure flexibility in fuel selection to prepare for growing supplies and lower risks. The GHG reduction potential of E-fuels depends entirely on abundant renewable electricity.
Challenges in the Decarbonization of the Energy Sector
Jun 2020
Publication
In order to limit the effects of climate change the carbon dioxide emissions associated with the energy sector need to be reduced. Significant reductions can be achieved by using appropriate technologies and policies. In the context of recent discussions about climate change and energy transition this article critically reviews some technologies policies and frequently discussed solutions. The options for carbon emission reductions are grouped into (1) generation of secondary energy carriers (2) end-use energy sectors and (3) sector interdependencies. The challenges on the way to a decarbonized energy sector are identified with respect to environmental sustainability security of energy supply economic stability and social aspects. A global carbon tax is the most promising instrument to accelerate the process of decarbonization. Nevertheless this process will be very challenging for humanity due to high capital requirements the competition among energy sectors for decarbonization options inconsistent environmental policies and public acceptance of changes in energy use.
Clean or Renewable – Hydrogen and Power-to-gas in EU Energy Law
Aug 2020
Publication
Interest in hydrogen as a carbon-neutral energy carrier is on the rise around the globe including in Europe. In particular power-to-gas as a technology to transform electricity to hydrogen is receiving ample attention. This article scrutinises current updates in the energy law framework of the EU to explain the legal pre-conditions for the various possible applications of power-to-gas technology. It highlights the influence of both electricity and gas legislation on conversion storage and transmission of hydrogen and demonstrates why ‘green’ hydrogen might come with certain legal privileges under the Renewable Energy Directive attached to it as opposed to the European Commission’s so-called ‘clean’ hydrogen. The article concludes by advocating for legal system integration in EU energy law namely merging the currently distinct EU electricity and gas law frameworks into one unified EU Energy Act.
Analyzing the Necessity of Hydrogen Imports for Net-zero Emission Scenarios in Japan
Jun 2021
Publication
With Japan’s current plans to reach a fully decarbonized society by 2050 and establish a hydrogen society substantial changes to its energy system need to be made. Due to the limited land availability in Japan significant amounts of hydrogen are planned to be imported to reach both targets. In this paper a novel stochastic version of the open-source multi-sectoral Global Energy System Model in conjunction with a power system dispatch model is used to analyze the impacts of both availability and price of hydrogen imports on the transformation of the Japanese energy system considering a net-zero emission target. This analysis highlights that hydrogen poses a valuable resource in specific sectors of the energy system. Therefore importing hydrogen can indeed positively impact energy system developments although up to 19mt of hydrogen will be imported in the case with the cheapest available hydrogen. In contrast without any hydrogen imports power demand nearly doubles in 2050 compared to 2019 due to extensive electrification in non-electricity sectors. However hydrogen imports are not necessarily required to reach net-zero emissions. In all cases however large-scale investments into renewable energy sources need to be made.
Renewable Energy, Carbon Capture & Sequestration and Hydrogen Solutions as Enabling Technologies for Reduced CO2 Energy Transition at a National Level: An Application to the 2030 Italian National Energy Scenarios
Dec 2022
Publication
Globally climate change fossil fuel depletion and greenhouse emissions are fundamental problems requiring massive effort from the international scientific community to be addressed and solved. Following the Clean Energy for all Europeans Package (CEP) guidelines the Italian Government has established challenging and tight objectives both on energy and climate matter to be targeted by 2030. Accordingly research activities on different topics are carried out in Italy looking at the installation of intermittent renewable energy systems (IRES) implementation of carbon capture and sequestration (CCS) on existing power plants and hydrogen technology and infrastructure penetration for accomplishing the end-users demands. The optimal integration of the above-mentioned technologies is one of the most effective weapons to address these objectives. The paper investigates different energy scenarios for meeting the Italian National Energy and Climate Plan (NECP) 2030 targets showing how the combined implementation of around +12 GW of IRES and +6 GW of electrolyzers compared to the national estimates simultaneously with the CCS of around 10 Mt of CO2 per year can reduce the CO2 emissions up to about 247 Mt/year. Thanks to the adoption of the well-established software platform EnergyPlan the integration of IRES plants CCS and hydrogen-based technologies have been explored and the most successful results for concurrently reducing the impact of industrial transport residential and energy sectors and mitigating the greenhouse emissions substantially relies on the diversifications. Results show both the technical and economic convenience of a 2030 energy scenario which implements properly hydrogen IRES and CCS penetration in the energy system meeting the NECP 2030 targets and maintaining both the over-generation of the power plants below 5 TWh and the initial capital expenditure to be sustained for this scenario to occur below +80% compared to the 2019 energy scenario.
Everything About Hydrogen Podcast: Can CUTRIC Clean Canada?
Mar 2021
Publication
When the pandemic recedes lockdowns and restrictions are relaxed and eventually eliminated and millions of residents in cities across the world begin to return to their offices and workplaces public transit systems will once again be at the core of billions of commuters' daily activities. Urban transit systems are designed to move huge volumes of people through cities and communities quickly reliably and cost-efficiently (some systems accomplish these goals better than others!). The energy needed to run these networks of cars trains and buses is enormous and today most of it comes from fossil fuels. How can communities - both large and small - redesign their transit systems to eliminate operational carbon emissions in the future?
The podcast can be found on their website
The podcast can be found on their website
Everything About Hydrogen Podcast: Decarbonising the Gas Grid with Cadent
Mar 2020
Publication
On this weeks episode the team are talking all things hydrogen with Lorna Millington Future Networks Manager in the Safety and Network Strategy team at Cadent. On the show we discuss the role that Cadent and other gas distribution network operators (GDNOs) are playing in supporting the transition towards a low (and eventually zero) carbon gas grid through the use of hydrogen. The potential for hydrogen to support decarbonisation of heat through the gas network is one of the most exciting emerging themes for countries that have large existing gas networks and who are looking to repurpose those assets towards national net zero objectives. As a leader on hydrogen into the gas grid projects Cadent offer a wealth of knowledge around the potential opportunities and considerations for displacing natural gas with hydrogen over time. And given the chance to reduce up to 6 million tonnes of CO2 a year through using more hydrogen in the gas grid this is a show you won’t want to miss! All this and more on the show!
The podcast can be found on their website
The podcast can be found on their website
Between Hope And Hype: A Hydrogen Vision For The UK
Mar 2021
Publication
There is a growing conversation around the role that hydrogen can play in the future of the UK and how to best harness its potential to secure jobs show climate leadership promote industrial competitiveness and drive innovation. The Government’s ‘Ten Point Plan for a Green Industrial Revolution’ included hydrogen as one of its ten actions targeting 5GW of ‘low carbon’ hydrogen production by 2030. Britain is thus joining the EU US Japan Germany and a host of other countries seeking to be part of the hydrogen economy of the future.<br/><br/>A focus on clean green hydrogen within targeted sectors and hubs can support multiple Government goals – including demonstrating climate leadership reducing regional inequalities through the ‘levelling up’ agenda and ensuring a green and cost-effective recovery from the coronavirus pandemic which prioritises jobs and skills. A strategic hydrogen vision must be honest and recognise where green hydrogen does not present the optimal pathway for decarbonisation – for instance where alternative solutions are already readily available for roll-out are more efficient and cost-effective. A clear example is hydrogen use for heating where it is estimated to require around 30 times more offshore wind farm capacity than currently available to produce enough green hydrogen to replace all gas boilers as well as adding costs for consumers.<br/><br/>This paper considers the offer of hydrogen for key Government priorities – including an inclusive and resilient economic recovery from the pandemic demonstrating climate leadership and delivering for all of society across the UK. It assesses existing evidence and considers the risks and opportunities and how they might inform a strategic vision for the UK. Ahead of the forthcoming Hydrogen Strategy it sets expectations for Government and outlines key recommendations.
Everything About Hydrogen Podcast: ITM Power
Sep 2019
Publication
On this weeks show we discuss with Graham Cooley the CEO of ITM Power how his company has expanded from a research company on AIM in the early 2000’s to one of the largest electrolyser manufacturers in the world. On the show we also ask Graham to talk about how the hydrogen market has evolved where he sees the potential growth trajectory for the industry and how ITM sees its role within this space.
The podcast can be found on their website
The podcast can be found on their website
Integrating a Hydrogen Fuel Cell Electric Vehicle with Vehicle-to-grid Technology, Photovoltaic Power and a Residential Building
Feb 2018
Publication
This paper presents the results of a demonstration project including building-integrated photovoltaic (BIPV) solar panels a residential building and a hydrogen fuel cell electric vehicle (FCEV) for combined mobility and power generation aiming to achieve a net zero-energy residential building target. The experiment was conducted as part of the Car as Power Plant project at The Green Village in the Netherlands. The main objective was to assess the end-user’s potential of implementing FCEVs in vehicle-to-grid operation (FCEV2G) to act as a local energy source. FCEV2G field test performance with a Hyundai ix35 FCEV are presented. The car was adapted using a power output socket capable of delivering up to 10 kW direct current (DC) to the alternating current (AC) national grid when parked via an off-board (grid-tie) inverter. A Tank-To-AC-Grid efficiency (analogous to Tank- To-Wheel efficiency when driving) of 44% (measured on a Higher Heating Value basis) was obtained when the car was operating in vehicle-to-grid (V2G) mode at the maximum power output. By collecting and analysing real data on the FCEV power production in V2G mode and on BIPV production and household consumption two different operating modes for the FCEV offering balanced services to a residential microgrid were identified namely fixed power output and load following. Based on the data collected one-year simulations of a microgrid consisting of 10 all-electric dwellings and 5 cars with the different FCEV2G modes of operation were performed. Simulation results were evaluated on the factors of autonomy self-consumption of locally produced energy and net-energy consumption by implementing different energy indicators. The results show that utilizing an FCEV working in V2G mode can reduce the annual imported electricity from the grid by approximately 71% over one year and aiding the buildings in the microgrid to achieve a net zero-energy building target. Furthermore the simulation results show that utilizing the FCEV2G setup in both modes analysed could be economically beneficial for the end-user if hydrogen prices at the pump fall below 8.24 €/kg.
Hydrogen Production by Water Electrolysis with Low Power and High Efficiency Based on Pre‐Magnetic Polarization
Mar 2022
Publication
In this paper a method of efficient hydrogen production using low‐power electrolysis based on pre‐magnetic polarization was proposed in order to improve the rate of hydrogen produc‐ tion by water electrolysis with reduced energy consumption molecular polarity and stress–strain characteristics of distilled water under the condition of a pre‐magnetic field. By constructing a mi‐ crophysical model of hydrogen proton energy‐level transition and a macroscopic mathematical model corresponding to magnetization vector‐polarization hydrogen proton concentration in the pre‐magnetic field the ionic conductivity electrolyte current density interelectrode voltage and hydrogen production efficiency under a varying magnetic field were qualitatively and quantita‐ tively analyzed. In addition an adjustable pre‐magnetic polarization hydrolyzing hydrogen pro‐ duction test platform was set up to verify the effectiveness of the proposed method. The repeated test results within a magnetic field strength range of 0–10000 GS showed that the conductivity of distilled water after pre‐magnetic polarization treatment increased by 2–3 times the electrolytic current density of the PEM (Proton Exchange Membrane) increased with increasing magnetic field strength the voltage between the poles continuously decreased and the hydrogen production rate was significantly improved. When the magnetic field strength reached 10000 GS the rate of hydro‐ gen production by the electrolysis of distilled water increased by 15%–20% within a certain period of time.
Mg-based Materials for Hydrogen Storage
Aug 2021
Publication
Over the last decade’s magnesium and magnesium based compounds have been intensively investigated as potential hydrogen storage as well as thermal energy storage materials due to their abundance and availability as well as their extraordinary high gravimetric and volumetric storage densities. This review work provides a broad overview of the most appealing systems and of their hydrogenation/dehydrogenation properties. Special emphasis is placed on reviewing the efforts made by the scientific community in improving the material’s thermodynamic and kinetic properties while maintaining a high hydrogen storage capacity.
Progress and Challenges on the Thermal Management of Electrochemical Energy Conversion and Storage Technologies: Fuel Cells, Electrolysers, and Supercapacitors
Oct 2021
Publication
It is now well established that electrochemical systems can optimally perform only within a narrow range of temperature. Exposure to temperatures outside this range adversely affects the performance and lifetime of these systems. As a result thermal management is an essential consideration during the design and operation of electrochemical equipment and can heavily influence the success of electrochemical energy technologies. Recently significant attempts have been placed on the maturity of cooling technologies for electrochemical devices. Nonetheless the existing reviews on the subject have been primarily focused on battery cooling. Conversely heat transfer in other electrochemical systems commonly used for energy conversion and storage has not been subjected to critical reviews. To address this issue the current study gives an overview of the progress and challenges on the thermal management of different electrochemical energy devices including fuel cells electrolysers and supercapacitors. The physicochemical mechanisms of heat generation in these electrochemical devices are discussed in-depth. Physics of the heat transfer techniques currently employed for temperature control are then exposed and some directions for future studies are provided.
Challenges and Prospects of Renewable Hydrogen-based Strategies for Full Decarbonization of Stationary Power Applications
Oct 2021
Publication
The exponentially growing contribution of renewable energy sources in the electricity mix requires large systems for energy storage to tackle resources intermittency. In this context the technologies for hydrogen production offer a clean and versatile alternative to boost renewables penetration and energy security. Hydrogen production as a strategy for the decarbonization of the energy sources mix has been investigated since the beginning of the 1990s. The stationary sector i.e. all parts of the economy excluding the transportation sector accounts for almost three-quarters of greenhouse gases (GHG) emissions (mass of CO2-eq) in the world associated with power generation. While several publications focus on the hybridization of renewables with traditional energy storage systems or in different pathways of hydrogen use (mainly power-to-gas) this study provides an insightful analysis of the state of art and evolution of renewable hydrogen-based systems (RHS) to power the stationary sector. The analysis started with a thorough review of RHS deployments for power-to-power stationary applications such as in power generation industry residence commercial building and critical infrastructure. Then a detailed evaluation of relevant techno-economic parameters such as levelized cost of energy (LCOE) hydrogen roundtrip efficiency (HRE) loss of power supply probability (LPSP) self-sufficiency ratio (SSR) or renewable fraction (fRES) is provided. Subsequently lab-scale plants and pilot projects together with current market trends and commercial uptake of RHS and fuel cell systems are examined. Finally the future techno-economic barriers and challenges for short and medium-term deployment of RHS are identified and discussed.
Coordinated Control Scheme of a Hybrid Renewable Power System Based on Hydrogen Energy Storage
Aug 2021
Publication
An all-weather energy management scheme for island DC microgrid based on hydrogen energy storage is proposed. A dynamic model of a large-scale wind–solar hybrid hydrogen-generation power generation system was established using a quasi-proportional resonance (QPR). We used the distributed Nautilus vertical axis wind power generation system as the main output of the system and it used the photovoltaic and hydrogen energy storage systems as alternative energy sources. Based on meeting the load power requirements and controlling the bus voltage stability we can convert the excess energy of the microgrid to hydrogen energy. With a shortage of load power we can convert the stored hydrogen into electrical energy for the load. Based on the ANSYS FLUENT software platform the feasibility and superiority over large-scale distributed Nautilus vertical axis wind power generation systems are verified. Through the MATLAB/Simulink software platform the effectiveness of the energy management method is verified. The results show that the large-scale distributed Nautilus vertical axis wind power generation system runs well in the energy system produces stable torque produces energy better than other types of wind turbines and has less impact on the power grid. The energy management method can ensure the normal operation of the system 24 h a day under the premise of maintaining the stable operation of the electric hydrogen system without providing external energy.
Dynamic Simulation and Thermoeconomic Analysis of a Hybrid Renewable System Based on PV and Fuel Cell Coupled with Hydrogen Storage
Nov 2021
Publication
The production of “green hydrogen” is currently one of the hottest topics in the field of renewable energy systems research. Hydrogen storage is also becoming more and more attractive as a flexible solution to mitigate the power fluctuations of solar energy systems. The most promising technology for electricity-to-hydrogen conversion and vice versa is the reversible solid-oxide cell (SOC). This device is still very expensive but it exhibits excellent performance under dynamic operating conditions compared to the competing devices. This work presents the dynamic simulation of a prototypal renewable plant combining a 50 kW photovoltaic (PV) field with a 50 kW solid-oxide electrolyzer cell (SOEC) and a compressed hydrogen tank. The electricity is used to meet the energy demand of a dwelling located in the area of Campi Flegrei (Naples). The SOC efficiency is simulated by developing a mathematical model in MATLAB®. The model also calculates the cell operating temperature as a function of the input current. Once the optimal values of the operating parameters of the SOC are calculated the model is integrated in the transient system simulation tool (TRNSYS) for dynamic analysis. Furthermore this work presents a parametric analysis of the hydrogen storage system (HSS). The results of the energy and environmental analyses show that the proposed system can reach a primary energy saving by 70% and an amount of saved CO2 of 28 tons/year. Some possible future market scenarios are considered for the economic analysis. In the most realistic case the optimal configuration shows a simple pay back lower than 10 years and a profit index of 46%.
Techno-economic Analysis of Hydrogen Electrolysis from Off-Grid Stand-Alone Photovoltaics Incorporating Uncertainty Analysis
Oct 2020
Publication
Solar-driven electrolysis of water to generate hydrogen is emerging as a viable strategy to decarbonize the global energy economy. However this direction is more expensive than traditional fossil fuel generation of hydrogen and effective pathways to lower this cost need to be identified. Here we report a Monte Carlo approach to explore a wide range of input assumptions to identify key cost drivers targets and localized conditions necessary for competitive stand-alone dedicated PV powered hydrogen electrolysis. We determine the levelized cost of hydrogen (LCOH) considering historical weather data for specific locations to model our PV system and optimize its size compared to the electrolyzer. This analysis and its methods show the potential for green hydrogen production using off-grid PV shows the merits of remote systems in areas of high solar resource and provides cost and performance targets for electrolyzer technologies.
Everything About Hydrogen Podcast: Giga-watt it Takes to Scale Green Hydrogen (and Ammonia)
Feb 2021
Publication
How do we get green hydrogen (and green ammonia) production to scale and make it cost competitive? It's a great question and we ask it all the time on the show. Well Alicia Eastman Co-founder & Managing Director of InterContinental Energy (ICE) may be one of the best authorities in the world on this topic and she joins us on this episode of EAH to tell the team all about her and ICE's work developing the Asian Renewable Energy Hub (AREH). Located in Western Australia the AREH when completed will be the largest renewable energy project by total generation capacity on the planet. At 26 GW it surpasses even the likes of the Three Gorges Dam and will act as a central production and distribution point for huge quantities of clean hydrogen and ammonia for offtakers and customers across APAC and beyond. The AREH is a truly massive project that has global implications for the global energy landscape of the future.
The podcast can be found on their website.
The podcast can be found on their website.
Main Hydrogen Production Processes: An Overview
May 2021
Publication
Due to its characteristics hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources both of fossil and renewable origin and with as many production processes which can use renewable or non-renewable energy sources. To achieve carbon neutrality the sources must necessarily be renewable and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized mainly focusing on renewable feedstocks furthermore a series of relevant articles published in the last year are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.
Uncomfortable Home Truths - Why Britain Urgently Needs a Low Carbon Heat Strategy Future Gas Series Part 3
Nov 2019
Publication
UK homes are primarily heated by fossil fuels and contribute 13% of UK’s carbon footprint (equivalent to all the UK’s 38.4m cars). The report says this is incompatible with UK climate legislation targeting net-zero economy by 2050. New polling finds that consumers are open to cleaner greener ways to heat their homes into the future but that they are “still in the dark about smarter greener heating solutions and lack access to independent advice to help them make better decisions for their homes pockets and the planet”.<br/><br/>The report – Uncomfortable Home Truths: why Britain urgently needs a low carbon heat strategy – says a bold new national roadmap is needed by 2020 which puts consumers and households at the heart of a revolution in green heat innovation. It recommends the creation of an Olympic-style delivery body to catalyse and coordinate regional innovation and local leadership tailored to different parts of the UK and the nation’s diverse housing stock.<br/><br/>This report is the third in the Future Gas Series which has explored the opportunities and challenges associated with using low carbon gas in the energy system and is backed by cross-party parliamentary co-Chairs
Combustion Characteristics of Diesel-hydrogen Dual Fuel Engine at Low Load
May 2013
Publication
In the present study hydrogen utilization as diesel engine fuel at low load operation was investigated. Hydrogen cannot be used directly in a diesel engine due to its auto ignition temperature higher than that of diesel fuel. One alternative method is to use hydrogen in enrichment or induction. To investigate the combustion characteristics of this dual fuel engine a single cylinder diesel research engine was converted to utilize hydrogen as fuel. Hydrogen was introduced to the intake manifold using a mixer before entering the combustion chamber. The engine was run at a constant speed of 2000 rpm and 10 Nm load. Hydrogen was introduced at the flow rate of 21.4 36.2 and 49.6 liter/minute. Specific energy consumption indicated efficiency and cylinder pressure were investigated. At this low load the hydrogen enrichment reduced the cylinder peak pressure and the engine efficiency. The reaction progress variable and combustion rate of reaction were slower as shown by the CFD calculation.
Ignition of Hydrogen-air Mixtures Under Volumetric Expansion Conditions
Sep 2017
Publication
A better understanding of chemical kinetics under volumetric expansion is important for a number of situations relevant to industrial safety including detonation diffraction and direct initiation reflected shock-ignition at obstacles ignition behind a decaying shock among others. The ignition of stoichiometric hydrogen-air mixtures was studied using 0D numerical simulations with time-dependent specific volume variations. The competition between chemical energy release and expansion-induced cooling was characterized for different cooling rates and mathematical forms describing the shock decay rate. The critical conditions for reaction quenching were systematically determined and the thermo-chemistry dynamics were analyzed near the critical conditions.
How to Decarbonise the UKs Freight Sector by 2050
Dec 2020
Publication
To achieve the UK’s net zero target vehicles including heavy-duty vehicles (HDVs) will need to be entirely decarbonised. The UK government has announced that it plans to phase out the sale of all new cars and vans with engines between 2030 and 2035. It has also announced its intention to consult on a similar phase-out for diesel-powered heavy-goods vehicles (HGVs). This study analyses policies and technologies which can contribute to the decarbonisation of the UK's inland freight sector.
It comprises an emissions modelling exercise and a cost analysis for total cost of ownership (TCO) of long-haul trucks. The study shows that for urban and regional deliveries battery electric trucks offer the best option to decarbonise. It also shows that battery electric trucks and those using an overhead catenary infrastructure are likely to be the most cost-effective pathway to decarbonise long-haul trucks by 2050 but that renewable hydrogen could also be an option.
Link to Document Download on Transport & Environment website
It comprises an emissions modelling exercise and a cost analysis for total cost of ownership (TCO) of long-haul trucks. The study shows that for urban and regional deliveries battery electric trucks offer the best option to decarbonise. It also shows that battery electric trucks and those using an overhead catenary infrastructure are likely to be the most cost-effective pathway to decarbonise long-haul trucks by 2050 but that renewable hydrogen could also be an option.
Link to Document Download on Transport & Environment website
Multi-Criteria Comparative Analysis of Clean Hydrogen Production Scenarios
Aug 2020
Publication
Different hydrogen production scenarios need to be compared in regard to multiple and often distinct aspects. It is well known that hydrogen production technologies based on environmentally-friendly renewable energy sources have higher values of the economic indicators than methods based on fossil fuels. Therefore how should this decision criterion (environmental) prevail over the other types of decision criteria (technical and economic) to make a scenario where hydrogen production only uses renewable energy sources the most attractive option for a decision-maker? This article presents the results of a multi-variant comparative analysis of scenarios to annually produce one million tons of pure hydrogen (99.999%) via electrolysis in Poland. The compared variants were found to differ in terms of electricity sources feeding the electrolyzers. The research demonstrated that the scenario where hydrogen production uses energy from photovoltaics only becomes the best option for the environmental criterion weighting value at 61%. Taking the aging effect of photovoltaic installation (PV) panels and electrolyzers after 10 years of operation into account the limit value of the environmental criterion rises to 63%. The carried out analyses may serve as the basis for the creation of systems supporting the development of clean and green hydrogen production technologies.
Everything About Hydrogen Podcast: Hydrogen: The Next Generation
May 2021
Publication
This is the inaugural episode of the EAH: Deep Dive podcast mini-series! Our first episode features the co-founders of Enapter Vaitea Cowan and Jan Justus-Schmidt. Enapter is a young company that has made a big splash in the hydrogen space with their modular scalable AEM electrolyzer technology. Last year they made headlines with their successful public offering on the DAX and the company is expected to be a the forefront of the hydrogen sector again in 2021 as they begin construction of their mass production facility in Germany and announce the upcoming Generation Hydrogen event on May 19 2021.
The podcast can be found on their website
The podcast can be found on their website
Hydrogen Fuel Cell Technology for the Sustainable Future of Stationary Applications
Dec 2019
Publication
The climate changes that are becoming visible today are a challenge for the global research community. The stationary applications sector is one of the most important energy consumers. Harnessing the potential of renewable energy worldwide is currently being considered to find alternatives for obtaining energy by using technologies that offer maximum efficiency and minimum pollution. In this context new energy generation technologies are needed to both generate low carbon emissions as well as identifying planning and implementing the directions for harnessing the potential of renewable energy sources. Hydrogen fuel cell technology represents one of the alternative solutions for future clean energy systems. This article reviews the specific characteristics of hydrogen energy which recommends it as a clean energy to power stationary applications. The aim of review was to provide an overview of the sustainability elements and the potential of using hydrogen as an alternative energy source for stationary applications and for identifying the possibilities of increasing the share of hydrogen energy in stationary applications respectively. As a study method was applied a SWOT analysis following which a series of strategies that could be adopted in order to increase the degree of use of hydrogen energy as an alternative to the classical energy for stationary applications were recommended. The SWOT analysis conducted in the present study highlights that the implementation of the hydrogen economy depends decisively on the following main factors: legislative framework energy decision makers information and interest from the end beneficiaries potential investors and existence of specialists in this field.
Criticality and Life-Cycle Assessment of Materials Used in Fuel-Cell and Hydrogen Technologies
Mar 2021
Publication
The purpose of this paper is to obtain relevant data on materials that are the most commonly used in fuel-cell and hydrogen technologies. The focus is on polymer-electrolyte-membrane fuel cells solid-oxide fuel cells polymer-electrolyte-membrane water electrolysers and alkaline water electrolysers. An innovative methodological approach was developed for a preliminary material assessment of the four technologies. This methodological approach leads to a more rapid identification of the most influential or critical materials that substantially increase the environmental impact of fuel-cell and hydrogen technologies. The approach also assisted in amassing the life-cycle inventories—the emphasis here is on the solid-oxide fuel-cell technology because it is still in its early development stage and thus has a deficient materials’ database—that were used in a life-cycle assessment for an in-depth material-criticality analysis. All the listed materials—that either are or could potentially be used in these technologies—were analysed to give important information for the fuel-cell and hydrogen industries the recycling industry the hydrogen economy as well as policymakers. The main conclusion from the life-cycle assessment is that the polymer-electrolyte membrane water electrolysers have the highest environmental impacts; lower impacts are seen in polymer-electrolyte-membrane fuel cells and solid-oxide fuel cells while the lowest impacts are observed in alkaline water electrolysers. The results of the material assessment are presented together for all the considered materials but also separately for each observed technology.
Biological Hydrogen Methanation Systems – An Overview of Design and Efficiency
Oct 2019
Publication
The rise in intermittent renewable electricity production presents a global requirement for energy storage. Biological hydrogen methanation (BHM) facilitates wind and solar energy through the storage of otherwise curtailed or constrained electricity in the form of the gaseous energy vector biomethane. Biological methanation in the circular economy involves the reaction of hydrogen – produced during electrolysis – with carbon dioxide in biogas to produce methane (4H2 + CO2 = CH4 + 2H2) typically increasing the methane output of the biogas system by 70%. In this paper several BHM systems were researched and a compilation of such systems was synthesized facilitating comparison of key parameters such as methane evolution rate (MER) and retention time. Increased retention times were suggested to be related to less efficient systems with long travel paths for gases through reactors. A significant lack of information on gas-liquid transfer co-efficient was identified
Electrolyzer Performance Analysis of an Integrated Hydrogen Power System for Greenhouse Heating. A Case Study
Jul 2016
Publication
A greenhouse containing an integrated system of photovoltaic panels a water electrolyzer fuel cells and a geothermal heat pump was set up to investigate suitable solutions for a power system based on solar energy and hydrogen feeding a self-sufficient geothermal-heated greenhouse. The electricity produced by the photovoltaic source supplies the electrolyzer; the manufactured hydrogen gas is held in a pressure tank. In these systems the electrolyzer is a crucial component; the technical challenge is to make it work regularly despite the irregularity of the solar source. The focus of this paper is to study the performance and the real energy efficiency of the electrolyzer analyzing its operational data collected under different operating conditions affected by the changeable solar radiant energy characterizing the site where the experimental plant was located. The analysis of the measured values allowed evaluation of its suitability for the agricultural requirements such as greenhouse heating. On the strength of the obtained result a new layout of the battery bank has been designed and exemplified to improve the performance of the electrolyzer. The evaluations resulting from this case study may have a genuine value therefore assisting in further studies to better understand these devices and their associated technologies.
Multiscale Modelling of Hydrogen Transport and Segregation in Polycrystalline Steels
Jun 2018
Publication
A key issue in understanding and effectively managing hydrogen embrittlement in complex alloys is identifying and exploiting the critical role of the various defects involved. A chemo-mechanical model for hydrogen diffusion is developed taking into account stress gradients in the material as well as microstructural trapping sites such as grain boundaries and dislocations. In particular the energetic parameters used in this coupled approach are determined from ab initio calculations. Complementary experimental investigations that are presented show that a numerical approach capable of massive scale-bridging up to the macroscale is required. Due to the wide range of length scales accounted for we apply homogenisation schemes for the hydrogen concentration to reach simulation dimensions comparable to metallurgical process scales. Via a representative volume element approach an ab initio based scale bridging description of dislocation-induced hydrogen aggregation is easily accessible. When we extend the representative volume approach to also include an analytical approximation for the ab initio based description of grain boundaries we find conceptual limitations that hinder a quantitative comparison to experimental data in the current stage. Based on this understanding the development of improved strategies for further efficient scale bridging approaches is foreseen.
Recent Progress and New Perspectives on Metal Amide and Imide Systems for Solid-State Hydrogen Storage
Apr 2018
Publication
Hydrogen storage in the solid state represents one of the most attractive and challenging ways to supply hydrogen to a proton exchange membrane (PEM) fuel cell. Although in the last 15 years a large variety of material systems have been identified as possible candidates for storing hydrogen further efforts have to be made in the development of systems which meet the strict targets of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) and U.S. Department of Energy (DOE). Recent projections indicate that a system possessing: (i) an ideal enthalpy in the range of 20–50 kJ/mol H2 to use the heat produced by PEM fuel cell for providing the energy necessary for desorption; (ii) a gravimetric hydrogen density of 5 wt. % H2 and (iii) fast sorption kinetics below 110 ◦C is strongly recommended. Among the known hydrogen storage materials amide and imide-based mixtures represent the most promising class of compounds for on-board applications; however some barriers still have to be overcome before considering this class of material mature for real applications. In this review the most relevant progresses made in the recent years as well as the kinetic and thermodynamic properties experimentally measured for the most promising systems are reported and properly discussed.
Cold Hydrogen Blowdown Release: An Inter-comparison Study
Sep 2021
Publication
Hydrogen dispersion in stagnant environment resulting from blowdown of a vessel storing the gas at cryogenic temperature is simulated using different CFD codes and modelling strategies. The simulations are based on the DISCHA experiments that were carried out by Karlsruhe Institute of Technology (KIT) and Pro-Science (PS). The selected test for the current study involves hydrogen release from a 2.815 dm3 volume tank with an initial pressure of 200 barg and temperature 80 K. During the release the hydrogen pressure in the tank gradually decreased. A total of about 139 gr hydrogen is released through a 4 mm diameter. The temperature time series and the temperature decay rate of the minimum value predicted by the different codes are compared with each other and with the experimentally measured ones. Recommendations for future experimental setup and for modeling approaches for similar releases are provided based on the present analysis. The work is carried out within the EU-funded project PRESLHY.
How Green Are the National Hydrogen Strategies?
Feb 2022
Publication
Since Japan promulgated the world’s first national hydrogen strategy in 2017 28 national (or regional in the case of the EU) hydrogen strategies have been issued by major world economies. As carbon emissions vary with different types of hydrogen and only green hydrogen produced from renewable energy can be zero-emissions fuel this paper interrogates the commitment of the national hydrogen strategies to achieve decarbonization objectives focusing on the question “how green are the national hydrogen strategies?” We create a typology of regulatory stringency for green hydrogen in national hydrogen strategies analyzing the text of these strategies and their supporting policies and evaluating their regulatory stringency toward decarbonization. Our typology includes four parameters fossil fuel penalties hydrogen certifications innovation enablement and the temporal dimension of coal phasing out. Following the typology we categorize the national hydrogen strategies into three groups: zero regulatory stringency scale first and clean later and green hydrogen now. We find that most national strategies are of the type “scale first and clean later” with one or more regulatory measures in place. This article identifies further challenges to enhancing regulatory stringency for green hydrogen at both national and international levels.
Are Scenarios of Hydrogen Vehicle Adoption Optimistic? A Comparison with Historical Analogies
Nov 2015
Publication
There is a large literature exploring possible hydrogen futures using various modelling and scenario approaches. This paper compares the rates of transition depicted in that literature with a set of historical analogies. These analogies are cases in which alternative-fuelled vehicles have penetrated vehicle markets. The paper suggests that the literature has tended to be optimistic about the possible rate at which hydrogen vehicles might replace oil-based transportation. The paper compares 11 historical adoptions of alternative fuel vehicles with 24 scenarios from 20 studies that depict possible hydrogen futures. All but one of the hydrogen scenarios show vehicle adoption faster than has occurred for hybrid electric vehicles in Japan the most successful market for hybrids. Several scenarios depict hydrogen transitions occurring at a rate faster than has occurred in any of the historic examples. The paper concludes that scenarios of alternative vehicle adoption should include more pessimistic scenarios alongside optimistic ones.
The Economics and the Environmental Benignity of Different Colors of Hydrogen
Feb 2022
Publication
Due to the increasing greenhouse gas emissions as well as due to the rapidly increasing use of renewable energy sources in the electricity generation over the last years interest in hydrogen is rising again. Hydrogen can be used as a storage for renewable energy balancing the whole energy systems and contributing to the decarbonization of the energy system especially of the industry and the transport sector. The major objective of this paper is to discuss various ways of hydrogen production depending on the primary energy sources used. Moreover the economic and environmental performance of three major hydrogen colors as well as major barriers for faster deployment in fuel cell vehicles are analyzed. The major conclusion is that the full environmental benefits of hydrogen use are highly dependent on the hydrogen production methods and primary sources used. Only green hydrogen with electricity from wind PV and hydro has truly low emissions. All other sources like blue hydrogen with CCUS or electrolysis using the electricity grid have substantially higher emissions coming close to grey hydrogen production. Another conclusion is that it is important to introduce an international market for hydrogen to lower costs and to produce hydrogen where conditions are best. Finally the major open question remaining is whether e including all external costs of all energy carriers hydrogen of any color may become economically competitive in any sector of the energy system. The future success of hydrogen is very dependent on technological development and resulting cost reductions as well as on future priorities and the corresponding policy framework. The policy framework should support the shift from grey to green hydrogen.
Hydrogen Blending and the Gas Commercial Framework - Report on Conclusions of NIA study
Sep 2020
Publication
Blending hydrogen into the gas grid could be an important stepping stone during the transition to a sustainable net zero system. In particular it may: provide a significant and reliable source of demand for hydrogen producers supporting the investment case for hydrogen; provide learnings and incremental change towards what could potentially become a 100% hydrogen grid; and immediately decarbonise a portion of the gas flowing through the grid. Technical questions relating to hydrogen blending are being taken forward by the industry (e.g. through the HyDeploy project in relation to the maximum potential blend of hydrogen that can be accommodated without end user appliances needing to be altered or replaced). But if blending is to take place changes to commercial arrangements will be necessary as today these assume a relatively uniform gas quality. In particular the commercial framework will need to ensure that limits on the percentage of hydrogen that can safely be blended (currently expected to be around 20% by volume) are not exceeded. We have been commissioned by Cadent to undertake a Network Innovation Allowance (NIA) project to identify the changes required to the gas commercial framework that will enable hydrogen blending in the GB gas grid and to set out a roadmap for how these can be delivered. This report sets out our recommendations.
No more items...