Applications & Pathways
Equivalent Minimum Hydrogen Consumption of Fuzzy Control-Based Fuel Cells: Exploration of Energy Management Strategies for Ships
Feb 2024
Publication
Aiming to solve the problems of insufficient dynamic responses the large loss of energy storage life of a single power cell and the large fluctuation in DC (direct current) bus voltage in fuel cell vessels this study takes a certain type of fuel cell ferry as the research object and proposes an improved equivalent minimum hydrogen consumption energy management strategy based on fuzzy logic control. First a hybrid power system including a fuel cell a lithium–iron–phosphate battery and a supercapacitor is proposed with the simulation of the power system of the modified mother ship. Second a power system simulation model and a double-closed-loop PI (proportion integration) control model are established in MATLAB/Simulink to design the equivalent hydrogen consumption model and fuzzy logic control strategy. The simulation results show that under the premise of meeting the load requirements the control strategy designed in this paper improves the Li-ion battery’s power the Li-ion battery’s SOC (state of charge) the bus voltage stability and the equivalent hydrogen consumption significantly compared with those before optimization which improves the stability and economy of the power system and has certain practical engineering value.
Hierarchical Model Predictive Control for Islanded and Grid-connected Microgrids with Wind Generation and Hydrogen Energy Storage Systems
Aug 2023
Publication
This paper presents a novel energy management strategy (EMS) to control a wind-hydrogen microgrid which includes a wind turbine paired with a hydrogen-based energy storage system (HESS) i.e. hydrogen production storage and re-electrification facilities and a local load. This complies with the mini-grid use case as per the IEA-HIA Task 24 Final Report where three different use cases and configurations of wind farms paired with HESS are proposed in order to promote the integration of wind energy into the grid. Hydrogen production surpluses by wind generation are stored and used to provide a demand-side management solution for energy supply to the local and contractual loads both in the grid-islanded and connected modes with corresponding different control objectives. The EMS is based on a hierarchical model predictive control (MPC) in which long-term and short-term operations are addressed. The long-term operations are managed by a high-level MPC in which power production by wind generation and load demand forecasts are considered in combination with day-ahead market participation. Accordingly the hydrogen production and re-electrification are scheduled so as to jointly track the load demand maximize the revenue through electricity market participation and minimize the HESS operating costs. Instead the management of the short-term operations is entrusted to a low-level MPC which compensates for any deviations of the actual conditions from the forecasts and refines the power production so as to address the real-time market participation and the short time-scale equipment dynamics and constraints. Both levels also take into account operation requirements and devices’ operating ranges through appropriate constraints. The mathematical modeling relies on the mixed-logic dynamic (MLD) framework so that the various logic states and corresponding continuous dynamics of the HESS are considered. This results in a mixed-integer linear program which is solved numerically. The effectiveness of the controller is analyzed by simulations which are carried out using wind forecasts and spot prices of a wind farm in center-south of Italy.
An On-Board Pure H2 Supply System Based on A Membrane Reactor for A Fuel Cell Vehicle: A Theoretical Study
Jul 2020
Publication
In this novel conceptual fuel cell vehicle (FCV) an on-board CH4 steam reforming (MSR) membrane reformer (MR) is considered to generate pure H2 for supplying a Fuel Cell (FC) system as an alternative to the conventional automobile engines. Two on-board tanks are forecast to store CH4 and water useful for feeding both a combustion chamber (designed to provide the heat required by the system) and a multi tubes Pd-Ag MR useful to generate pure H2 via methane steam reforming (MSR) reaction. The pure H2 stream is hence supplied to the FC. The flue gas stream coming out from the combustion chamber is used to preheat the MR feed stream by two heat exchangers and one evaporator. Then this theoretical work demonstrates by a 1-D model the feasibility of the MR based system in order to generate 5 kg/day of pure H2 required by the FC system for cruising a vehicle for around 500 km. The calculated CH4 and water consumptions were 50 and 70 kg respectively per 1 kg of pure H2. The on-board MR based FCV presents lower CO2 emission rates than a conventional gasoline-powered vehicle also resulting in a more environmentally friendly solution.
A Review of the Research Progress and Application of Key Components in the Hydrogen Fuel Cell System
Jan 2024
Publication
The hydrogen cycle system one of the main systems used for hydrogen fuel cells has many advantages. It can improve the efficiency the water capacity and the management of thermal fuel cells. It can also enhance the safety of the system. Therefore it is widely used in hydrogen fuel cell vehicles. We introduce the structure and principles of hydrogen cycle pumps ejectors and steam separators and analyze and summarize the advantages of the components as well as reviewing the latest research progress and industrialization status of hydrogen cycle pumps and ejectors. The technical challenges in hydrogen circulation systems and the development direction of key technologies in the future are discussed. This paper aims to provide a reference for research concerning hydrogen energy storage application technology in hydrogen fuel cell systems.
A Review of Current Advances in Ammonia Combustion from the Fundamentals to Applications in Internal Combustion Engines
Aug 2023
Publication
The energy transition from hydrocarbon-based energy sources to renewable and carbon-free energy sources such as wind solar and hydrogen is facing increasing demands. The decarbonization of global transportation could come true via applying carbon-free fuel such as ammonia especially for internal combustion engines (ICEs). Although ammonia has advantages of high hydrogen content high octane number and safety in storage it is uninflammable with low laminar burning velocity thus limiting its direct usage in ICEs. The purpose of this review paper is to provide previous studies and current research on the current technical advances emerging in assisted combustion of ammonia. The limitation of ammonia utilization in ICEs such as large minimum ignition energy lower flame speed and more NOx emission with unburned NH3 could be solved by oxygen-enriched combustion ammonia–hydrogen mixed combustion and plasma-assisted combustion (PAC). In dual-fuel or oxygen-enriched NH3 combustion accelerated flame propagation speeds are driven by abundant radicals such as H and OH; however NOx emission should be paid special attention. Furthermore dissociating NH3 in situ hydrogen by non-noble metal catalysts or plasma has the potential to replace dual-fuel systems. PAC is able to change classical ignition and extinction S-curves to monotonic stretching which makes low-temperature ignition possible while leading moderate NOx emissions. In this review the underlying fundamental mechanism under these technologies are introduced in detail providing new insight into overcoming the bottleneck of applying ammonia in ICEs. Finally the feasibility of ammonia processing as an ICE power source for transport and usage highlights it as an appealing choice for the link between carbon-free energy and power demand.
Integrated Power and Propulsion System Optimization for a Planetary-Hopping Robot
Aug 2022
Publication
Missions targeting the extreme and rugged environments on the moon and Mars have rich potential for a high science return although several risks exist in performing these exploration missions. The current generation of robots is unable to access these high-priority targets. We propose using teams of small hopping and rolling robots called SphereX that are several kilograms in mass and can be carried by a large rover or lander and tactically deployed for exploring these extreme environments. Considering that the importance of minimizing the mass and volume of these robot platforms translates into significant mission-cost savings we focus on the optimization of an integrated power and propulsion system for SphereX. Hydrogen is used as fuel for its high energy and it is stored in the form of lithium hydride and oxygen in the form of lithium perchlorate. The system design undergoes optimization using Genetic Algorithms integrated with gradient-based search techniques to find optimal solutions for a mission. Our power and propulsion system as we show in this paper is enabling because the robots can travel long distances to perform science exploration by accessing targets not possible with conventional systems. Our work includes finding the optimal mass and volume of SphereX such that it can meet end-to-end mission requirements.
Developments in Hydrogen Fuel Cells
Mar 2023
Publication
The rapid growth in fossil fuels has resulted in climate change that needs to be controlled in the near future. Several methods have been proposed to control climate change including the development of efficient energy conversion devices. Fuel cells are environmentally friendly energy conversion devices that can be fuelled by green hydrogen with only water as a by-product or by using different biofuels such as biomass in wastewater urea in wastewater biogas from municipal and agricultural wastes syngas from agriculture wastes and waste carbon. This editorial discusses the fundamentals of the operation of the fuel cell and their application in various sectors such as residential transportation and power generation.
Climate Action for the Shipping Industry: Some Perspectives on the Role of Nuclear Power in Maritime Decarbonization
Feb 2023
Publication
The shipping industry is a major enabler of globalization trade commerce and human welfare. But it is still heavily served by fossil fuels which make it one of the foremost greenhouse gas emitting sectors operational today. It is also one of the hardest to abate segments of the transport industry. As part of the economy-wide climate change mitigation and adaptation efforts it is necessary to consider a low carbon energy transition for this segment as well. This study examines the potential role of nuclear power and cogeneration towards greening this sector and identifies the associated techno-commercial and policy challenges associated with the transition. Quantitative estimates of the economics and investments associated with some of the possible routes are also presented. Alternatives such as nuclear-powered ships along commercial maritime trading routes ships working on nuclear derived green hydrogen ammonia or other sustainable power fuels will enable not only decarbonization of the shipping industry but also allow further diversification of the nuclear industry through non-electric applications of nuclear power and new sector coupling opportunities. In the run-up to the UNFCCC-COP28 meeting in 2023 in UAE nuclear equipped nations heavily engaged in and dependent on maritime trade and commerce should definitely consider nuclear driven decarbonization of shipping and some of the options presented here as part of their climate action strategies.
Design and Optimization of a Type-C Tank for Liquid Hydrogen Marine Transport
May 2023
Publication
As one of the most promising renewable energy sources hydrogen has the excellent environmental benefit of producing zero emissions. A key technical challenge in using hydrogen across sectors is placed on its storage technology. The storage temperature of liquid hydrogen (20 K or 253 C) is close to absolute zero so the storage materials and the insulation layers are subjected to extremely stringent requirements against the cryogenic behaviour of the medium. In this context this research proposed to design a large liquid hydrogen type-C tank with AISI (American Iron and Steel Institution) type 316 L stainless steel as the metal barrier using Vapor-Cooled Shield (VCS) and Rigid Polyurethane Foams (RPF) as the insulation layer. A parametric study on the design of the insulation layer was carried out by establishing a thermodynamic model. The effects of VCS location on heat ingress to the liquid hydrogen transport tank and insulation temperature distribution were investigated and the optimal location of the VCS in the insulation was identified. Research outcomes finally suggest two optimal design schemes: (1) when the thickness of the insulation layer is determined Self-evaporation Vapor-Cooled Shield (SVCS) and Forcedevaporation Vapor-Cooled Shield (FVCS) can reduce heat transfer by 47.84% and 85.86% respectively; (2) when the liquid hydrogen evaporation capacity is determined SVCS and FVCS can reduce the thickness of the insulation layer by 50% and 67.93% respectively.
Review of the Planning and Distribution Methodologies to Locate Hydrogen Infrastructure in the Territory
Jan 2024
Publication
The member countries of the European Union (EU) have prioritized the incorporation of hydrogen as a key component of their energy objectives. As the world moves towards reducing its dependence on fossil fuels alternative sources of energy have gained prominence. With the growing development of Fuel Cell Electric Vehicles (FCEVs) the establishment of an infrastructure for hydrogen production and the creation of a network of service stations have become essential. This article’s purpose is to conduct a methodical review of literature regarding the use of green hydrogen for transportation and the planning of imperative infrastructure in the territory of the EU specifically Hydrogen Refueling Stations (HRS). In order to increase the acceptance of fuel cell vehicles a comprehensive network of hydrogen refueling stations (HRS) must be built that enable drivers to refuel their vehicles quickly and easily similar to gasoline or diesel vehicles. The literature review on this topic was conducted using the Web of Science database (WOS) with a variety of search terms proposed to cover all the key components of green hydrogen production and refueling infrastructure. The implementation of HRS powered by renewable energy sources is an important step in the adoption of fuel cell vehicles and overcoming the obstacles that come with their implementation will require cooperation and innovation from governments private businesses and other stakeholders.
Technology Pathways, Efficiency Gains and Price Implications of Decarbonising Residential Heat in the UK
Jun 2023
Publication
The UK government’s plans to decarbonise residential heating will mean major changes to the energy system whatever the specific technology pathway chosen driving a range of impacts on users and suppliers. We use an energy system model (UK TIMES) to identify the potential energy system impacts of alternative pathways to low or zero carbon heating. We find that the speed of transitioning can affect the network investment requirements the overall energy use and emissions generated while the primary heating fuel shift will determine which sectors and networks require most investment. Crucially we identify that retail price differences between heating fuels in the UK particularly gas and electricity could erode or eliminate bill savings from switching to more efficient heating systems.
Study on the Use of Fuel Cells in Shipping
Jan 2017
Publication
Fuel Cells are a promising technology in the context of clean power sustainability and alternative fuels for shipping. Different specific developments on Fuel Cells are available today with research and pilot projects under evaluation that have revealed strong potential for further scaled up implementation. The EMSA Study on the use of Fuel Cells in Shipping has been the result of this Agency’s initiative under the agreement of the Commission and in support of EU Member States an important instrument developed in close partnership with DNV-GL.
Notwithstanding the close dependency of Fuel Cell technology and the development of hydrogen fuel solutions different solutions are today in place making use of LNG methanol and other low flashpoint fuels. EMSA participates in support of the Commission in the 2nd phase development of the IGF Code where provisions for Fuel Cells are to be included as a new part of the text.
The EMSA Study on the use of Fuel Cells in Shipping includes a technology and regulatory review identifying gaps to be further explored the selection of the most promising Fuel Cell technologies for shipping and finally a generic Safety Assessment where the selected technologies are evaluated according to Risk & Safety aspects in generic ship design applications.
Notwithstanding the close dependency of Fuel Cell technology and the development of hydrogen fuel solutions different solutions are today in place making use of LNG methanol and other low flashpoint fuels. EMSA participates in support of the Commission in the 2nd phase development of the IGF Code where provisions for Fuel Cells are to be included as a new part of the text.
The EMSA Study on the use of Fuel Cells in Shipping includes a technology and regulatory review identifying gaps to be further explored the selection of the most promising Fuel Cell technologies for shipping and finally a generic Safety Assessment where the selected technologies are evaluated according to Risk & Safety aspects in generic ship design applications.
THyGA - Test Report on Mitigation Solutions for Residential Natural Gas Appliances Not Designed for Hydrogen Admixture
Apr 2023
Publication
This report from the WP5 “Mitigation” provides information and test results regarding perturbations that hydrogen could cause to gas appliances when blended to natural gas especially on anatural draught for exhaust fumes or acidity for the condensates. The important topic of on-site adjustment is also studied with test results on alternative technologies and proposals of mitigation approaches.
Pneumatic and Optical Characterization and Optimization of Hydrogen Injectors for Internal Combustion Engine Application
Aug 2022
Publication
To achieve future emission targets for internal combustion engines the use of hydrogen gas generated by renewable energy sources (known as “green” hydrogen) instead of fossil fuels plays a key role in the development of new combustion-based engine concepts. For new hydrogen engine generations there are different challenges concerning the injector layout and functionality. Especially when talking about direct hydrogen injection the key challenge is to ensure a proper mixing between hydrogen and the combustion air—the mixing of gas with a gas is not trivial as shown in this article. In terms of injector functionality it must be ensured that the requested amount of hydrogen gas needs to be provided in time and on the other hand accurately metered to provide an appropriate mixing formation quality inside the combustion chamber. This contribution discusses deep injector analysis techniques with pneumatic and optical approaches for an improved overall understanding of functionality and effects caused by operation with a gaseous fuel. A metering technique for gas flow characterization and for test simplification a comparison of hydrogen with helium and nitrogen as possible surrogate gases indicate that helium and nitrogen can act as a substitute for hydrogen in functional testing. Furthermore this contribution focuses on the usability of helium instead of hydrogen for the determination of spray properties. This is shown by the comparison of spray propagation images that were observed with the Schlieren technique in a pressure vessel proving comparable spray properties. In a next step the usage of spray-guiding devices to improve the global gas distribution during the injection period is discussed. Here it turns out that the volume increase does obviously not depend on the nozzle design. Thus the advantage of multi-hole guiding-devices is based on its flexible gas-jet orientation.
Toward to Hydrogen Energy of Electric Power: Characteristics and Main Case Studies in Shenzhen
Feb 2023
Publication
China has pledged that it will strive to achieve peak carbon emission by 2030 and realize carbon neutrality by 2060 which has spurred renewed interest in hydrogen for widespread decarbonization of the economy. Hydrogen energy is an important secondary clean energy with the advantage of high density high calorific value rich reserves extensive sources and high conversion efficiency that can be widely used in power generation transportation fuel and other fields. In recent years with the guidance of policies and the progress of technology China’s hydrogen energy industry has developed rapidly. About 42% of China’s carbon emissions comes from the power system and Shenzhen has the largest urban power grid in China. Bringing the utilization of hydrogen energy into Shenzhen’s power system is an important method to achieve industry transformation achieve the “double carbon” goal and promote sustainable development. This paper outlines the domestic and international development status of hydrogen energy introduces the characteristics of Shenzhen new power system the industrial utilization of hydrogen energy and the challenges of further integrating hydrogen energy into Shenzhen new power system and finally suggests on the integration of hydrogen energy into Shenzhen new power system in different dimensions.
Study on Hydrogen in Ports and Industrial Coastal Areas - Report 1
Jan 2023
Publication
The study feeds into the work of the Global Hydrogen Ports Coalition launched at the latest Clean Energy Ministerial (CEM12). This important international initiative brings together ports from around the world to work together on hydrogen technologies. The planned study will be a comprehensive assessment of the hydrogen demand in ports and industrial coastal areas enabling the creation of a 'European Hydrogen Ports Roadmap'. It will also feature clear economic forecasts based on a variety of business models for the transition to renewable hydrogen in ports while presenting new case studies and project concepts. “The objective is to provide new directions for research and innovation guidance for regulation codes and standards and proposals on policy and regulation. The forthcoming study will also help create impetus for stakeholders to come together and take a long term perspective on the hydrogen transition in ports. Finally the study will be a centralized resource It will form a Europe wide hydrogen ports ' when combined with roadmaps and other materials created by individual ports.
Hydrogen Energy as Future of Sustainable Mobility
May 2022
Publication
Conventional fuels for vehicular applications generate hazardous pollutants which have an adverse effect on the environment. Therefore there is a high demand to shift towards environment-friendly vehicles for the present mobility sector. This paper highlights sustainable mobility and specifically sustainable transportation as a solution to reduce GHG emissions. Thus hydrogen fuel-based vehicular technologies have started blooming and have gained significance following the zero-emission policy focusing on various types of sustainable motilities and their limitations. Serving an incredible deliverance of energy by hydrogen fuel combustion engines hydrogen can revolution various transportation sectors. In this study the aspects of hydrogen as a fuel for sustainable mobility sectors have been investigated. In order to reduce the GHG (Green House Gas) emission from fossil fuel vehicles researchers have paid their focus for research and development on hydrogen fuel vehicles and proton exchange fuel cells. Also its development and progress in all mobility sectors in various countries have been scrutinized to measure the feasibility of sustainable mobility as a future. This paper is an inclusive review of hydrogen-based mobility in various sectors of transportation in particular fuel cell cars that provides information on various technologies adapted with time to add more towards perfection. When compared to electric vehicles with a 200-mile range fuel cell cars have a lower driving cost in all of the 2035 and 2050 scenarios. To stimulate the use of hydrogen as a passenger automobile fuel the cost of a hydrogen fuel cell vehicle (FCV) must be brought down to at least the same level as an electric vehicle. Compared to gasoline cars fuel cell vehicles use 43% less energy and generate 40% less CO2.
Refuelling Tests of a Hydrogen Tank for Heavy-duty Applications
Sep 2023
Publication
A transition towards zero-emission fuels is required in the mobility sector in order to reach the climate goals. Here (green) renewable hydrogen for use in fuel cells will play an important role especially for heavy duty applications such as trucks. However there are still challenges to overcome regarding efficient storage infrastructure integration and optimization of the refuelling process. A key aspect is to reduce the refuelling duration as much as possible while staying below the maximum allowed temperature of 85 C. Experimental tests for the refuelling of a 320 l type III tank were conducted at different operating conditions and the tank gas temperature measured at the front and back ends. The results indicate a strongly inhomogeneous temperature field where measuring and verifying the actual maximum temperatures proves difficult. Furthermore a simulation approach is provided to calculate the average tank gas temperature at the end of the refuelling process.
Sustainable Propulsion Alternatives in Regional Aviation: The Case of the Canary Islands
May 2023
Publication
Sustainability is one of the main challenges the aviation industry is currently facing. In a global context of energy transition towards cleaner and renewable sources the sector is developing technologies to fly more efficiently and mitigate its environmental impact. Innovative propulsion alternatives such as biofuels electric aircraft and hydrogen engines are already a reality or are close to becoming so. To assess their feasibility a study is conducted on specific routes and aircraft across different flight ranges. The analysis focuses on the Canary Islands an outermost region of the EU with high mobility and no comparable alternative means of transport. For three routes flight profiles are analyzed obtaining the fuel consumption and emissions generated by the conventional propulsion and later applying the sustainable alternatives. The results indicate optimistic perspectives with reductions in environmental impact ranging between 40% and 75% compared to the present.
Hydrogen or Electric Drive—Inconvenient (Omitted) Aspects
May 2023
Publication
Currently hydrogen and electric drives used in various means of transport is a leading topic in many respects. This article discusses the most important aspects of the operation of vehicles with electric drives (passenger cars) and hydrogen drives. In both cases the official reason for using both drives is the possibility of independence from fossil fuel supplies especially oil. The desire for independence is mainly dictated by political considerations. This article discusses the acquisition of basic raw materials for the construction of lithium-ion batteries in electric cars as well as methods for obtaining hydrogen as a fuel. The widespread use of electric passenger cars requires the construction of a network of charging stations. This article shows that taking into account the entire production process of electric cars including lithium-ion batteries the argument that they are ecological cannot be used. Additionally it was indicated that there is no concept for the use of used accumulator batteries. If hydrogen drives are used in trains there is no need to build the traction network infrastructure and then continuously monitor its technical condition and perform the necessary repairs. Of course the necessary hydrogen tanks must be built but there must be similar tanks to store oil for diesel locomotives. This paper also deals with other possibilities of hydrogen application for transformational usage e.g. the use of combustion engines driven with liquid hydrogen. Unfortunately an optimistic approach to this issue does not allow for a critical view of the whole matter. In public discussion there is no room for scientific arguments and emotions to dominate.
Research on the Primary Frequency Regulation Control Strategy of a Wind Storage Hydrogen-Generating Power Station
Nov 2022
Publication
Wind curtailment and weak inertia characteristics are two factors that shackle the permeability of wind power. An electric hydrogen production device consumes electricity to produce hydrogen under normal working conditions to solve the problem of abandoning wind. When participating in frequency regulation it serves as a load reduction method to assist the system to rebuild a power balance and improve the wind power permeability. However due to its own working characteristics an electric hydrogen production device cannot undertake the high-frequency component of the frequency regulation power command; therefore an energy storage device was selected to undertake a high-frequency power command to assist the electric hydrogen production device to complete the system frequency regulation. This paper first proposes and analyzes the architecture of a wind storage hydrogen-generating station for centralized hydrogen production with a distributed energy storage and proposes the virtual inertia and droop characteristic mechanism of the wind storage hydrogen-generating station to simulate a synchronous unit. Secondly an alkaline electrolysis cell suitable for large-scale engineering applications is selected as the research object and its mathematical model is established the matching between different energy storage devices and their cooperation in power grid frequency regulation is analyzed and a super capacitor is selected. A control strategy for the wind storage hydrogen-generating power station to participate in power grid frequency regulation with a wide time scale is then proposed. Using the first-order low-pass filter the low-frequency component of the frequency regulation power command is realized by an electric hydrogen production device load reduction and a high-frequency component is realized by the energy storage device. Finally the effectiveness and rationality of the proposed control strategy are verified by establishing the simulation model of the wind storage hydrogen-generating power station with different initial wind speed states comparing the system frequency dip values under the proposed multi-energy cooperative control strategy and a single energy device control strategy.
A Web-based Decision Support System (DSS) for Hydrogen Refueling Station Location and Supply Chain Optimisation
Jun 2023
Publication
This study presents a novel web-based decision support system (DSS) that optimizes the locations of hydrogen refueling stations (HRSs) and hydrogen supply chains (HSCs). The system is developed with a design science approach that identifies key design requirements and features through interviews and literature reviews. Based on the findings a system architecture and data model were designed incorporating scenario management optimization model visualization and data management components. The DSS provides a two-stage solution model that links demand to HRSs and production facilities to HRSs. A prototype is demonstrated with a plan for 2025 and 2030 in the Republic of Korea where 450 to 660 stations were deployed nationwide and linked to production facilities. User evaluation confirmed the effectiveness of the DSS in solving optimization problems and its potential to assist the government and municipalities in planning hydrogen infrastructure.
Low-Carbon Transition Pathway Planning of Regional Power Systems with Electricity-Hydrogen Synergy
Nov 2022
Publication
Hydrogen energy leads us in an important direction in the development of clean energy and the comprehensive utilization of hydrogen energy is crucial for the low-carbon transformation of the power sector. In this paper the demand for hydrogen energy in various fields is predicted based on the support vector regression algorithm which can be converted into an equivalent electrical load when it is all produced from water electrolysis. Then the investment costs of power generators and hydrogen energy equipment are forecast considering uncertainty. Furthermore a planning model is established with the forecast data initial installed capacity and targets for carbon emission reduction as inputs and the installed capacity as well as share of various power supply and annual carbon emissions as outputs. Taking Gansu Province of China as an example the changes of power supply structure and carbon emissions under different scenarios are analysed. It can be found that hydrogen production through water electrolysis powered by renewable energy can reduce carbon emissions but will increase the demand for renewable energy generators. Appropriate planning of hydrogen storage can reduce the overall investment cost and promote a low carbon transition of the power system
Impact of Hydrogen Mixture on Fuel Consumption and Exhaust Gas Emissions in a Truck with Direct‑Injection Diesel Engine
May 2023
Publication
Hydrogen addition affects the composition of exhaust gases in vehicles. However the effects of hydrogen addition to compression ignition engines in running vehicles have not been evaluated. Hydrogen‑mixed air was introduced into the air intake of a truck equipped with a direct‑ injection diesel engine and running on a chassis dynamometer to investigate the effect of hydrogen addition on fuel consumption and exhaust gas components. The reduction in diesel consumption and the increase in hydrogen energy share (HES) showed almost linear dependence where the percentage decrease in diesel consumption is approximately 0.6 × HES. The percentage reduction of CO2 showed a one‑to‑one relationship to the reduction in diesel consumption. The reduction in emissions of CO PM and hydrocarbons (except for ethylene) had one to one or a larger correlation with the reduction of diesel consumption. On the other hand it was observed that NOx emissions increased and the percentage increase of NOx was 1.5~2.0 times that of HES. The requirement for total energy supply was more when hydrogen was added than for diesel alone. In the actual running mode only 50% of the energy of added hydrogen was used to power the truck. As no adjustments were made to the engine in this experiment a possible disadvantage that could be improved by adjusting the combustion conditions.
Modelling Large-scale Hydrogen Uptake in the Mexican Refinery and Power Sectors
Sep 2023
Publication
Due to the emissions reduction commitments that Mexico compromised in the Paris Agreement several clean fuel and renewable energy technologies need to penetrate the market to accomplish the environmental goals. Therefore there is a need to develop achievable and realistic policies for such technologies to ease the decision-making on national energy strategies. Several countries are starting to develop large-scale green hydrogen production projects to reduce the carbon footprint of the multiple sectors within the country. The conversion sectors namely power and refinery are fundamental sectors to decarbonise due to their energy supply role. Nowadays the highest energy consumables of the country are hydrocarbons (more than 90%) causing a particular challenge for deep decarbonisation. The purpose of this study is to use a multi-regional energy system model of Mexico to analyse a decarbonisation scenario in line with the latest National Energy System Development Program. Results show that if the country wants to succeed in reducing 22% of its GHG emissions and 51% of its short-lived climate pollutants emissions green hydrogen could play a role in power generation in regions with higher energy demand growth rates. These results show regarding the power sector that H2 could represent 13.8 GW or 5.1% of the total installed capacity by 2050 while for the refinery sector H2 could reach a capacity of 157 PJ/y which is around 31.8% of the total share and it is mainly driven by the increasing demands of the transport industry and power sectors. Nevertheless as oil would still represent the largest energy commodity CCS technologies would have to be deployed for new and retrofitted refinery facilities.
Techno-Economic Evaluation of Hydrogen-Based Cooking Solutions in Remote African Communities—The Case of Kenya
Apr 2023
Publication
Hydrogen has recently been proposed as a versatile energy carrier to contribute to archiving universal access to clean cooking. In hard-to-reach rural settings decentralized produced hydrogen may be utilized (i) as a clean fuel via direct combustion in pure gaseous form or blended with Liquid Petroleum Gas (LPG) or (ii) via power-to-hydrogen-to-power (P2H2P) to serve electric cooking (e-cooking) appliances. Here we present the first techno-economic evaluation of hydrogen-based cooking solutions. We apply mathematical optimization via energy system modeling to assess the minimal cost configuration of each respective energy system on technical and economic measures under present and future parameters. We further compare the potential costs of cooking for the end user with the costs of cooking with traditional fuels. Today P2H2P-based e-cooking and production of hydrogen for utilization via combustion integrated into the electricity supply system have almost equal energy system costs to simultaneously satisfy the cooking and electricity needs of the isolated rural Kenyan village studied. P2H2P-based e-cooking might become advantageous in the near future when improving the energy efficiency of e-cooking appliances. The economic efficiency of producing hydrogen for utilization by end users via combustion benefits from integrating the water electrolysis into the electricity supply system. More efficient and cheaper hydrogen technologies expected by 2050 may improve the economic performance of integrated hydrogen production and utilization via combustion to be competitive with P2H2P-based e-cooking. The monthly costs of cooking per household may be lower than the traditional use of firewood and charcoal even today when applying the current life-line tariff for the electricity consumed or utilizing hydrogen via combustion. Driven by likely future technological improvements and the expected increase in traditional and fossil fuel prices any hydrogen-based cooking pathway may be cheaper for end users than using charcoal and firewood by 2030 and LPG by 2040. The results suggest that providing clean cooking in rural villages could economically and environmentally benefit from utilizing hydrogen. However facing the complexity of clean cooking projects we emphasize the importance of embedding the results of our techno-economic analysis in holistic energy delivery models. We propose useful starting points for future aspects to be investigated in the discussion section including business and financing models.
Prospects of Hydrogen Application as a Fuel for Large-Scale Compressed-Air Energy Storages
Jan 2024
Publication
A promising method of energy storage is the combination of hydrogen and compressed-air energy storage (CAES) systems. CAES systems are divided into diabatic adiabatic and isothermal cycles. In the diabatic cycle thermal energy after air compression is discharged into the environment and the scheme implies the use of organic fuel. Taking into account the prospects of the decarbonization of the energy industry it is advisable to replace natural gas in the diabatic CAES scheme with hydrogen obtained by electrolysis using power-to-gas technology. In this article the SENECA-1A project is considered as a high-power hybrid unit using hydrogen instead of natural gas. The results show that while keeping the 214 MW turbines powered the transition to hydrogen reduces carbon dioxide emissions from 8.8 to 0.0 kg/s while the formation of water vapor will increase from 17.6 to 27.4 kg/s. It is shown that the adiabatic CAES SENECA-1A mode compared to the diabatic has 0.0 carbon dioxide and water vapor emission with relatively higher efficiency (71.5 vs. 62.1%). At the same time the main advantage of the diabatic CAES is the possibility to produce more power in the turbine block (214 vs. 131.6 MW) having fewer capital costs. Thus choosing the technology is a subject of complex technical economic and ecological study.
Techno-economic Study of Power-to-Power Renewable Energy Storage Based on the Smart Integration of Battery, Hydrogen, and Micro Gas Turbine Technologies
Mar 2023
Publication
This paper deals with the integration of a Power-to-Power Energy Storage System (P2P-ESS) based on a hydrogen driven micro gas turbine (mGT) for an off-grid application with a continuous demand of 30 kWe for three European cities: Palermo Frankfurt and Newcastle. In the first part of the analysis the results show that the latitude of the location is a very strong driver in determining the size of the system (hence footprint) and the amount of seasonal storage. The rated capacity of the PV plant and electrolyzer are 37%/41% and 58%/64% higher in Frankfurt and Newcastle respectively as compared to the original design for Palermo. And not only this but seasonal storage also increases largely from 3125 kg H2 to 5023 and 5920 kg H2 . As a consequence of this LCOE takes values of 0.86 e/kWh 1.26 e/kWh and 1.5 e/kWh for the three cities respectively whilst round-trip efficiency is approximately 15.7% for the three designs at the 3 cities. Finally with the aim to reduce the footprint and rating of the different systems a final assessment of the system hybridised with battery storage shows a 20% LCOE reduction and a 10% higher round-trip efficiency.
Green Hydrogen Supply Chain Risk Analysis: A European Hard-to-abate Sectors Perspective
May 2023
Publication
Green hydrogen is a tentative solution for the decarbonisation of hard-to-abate sectors such as steel chemical cement and refinery industries. Green hydrogen is a form of hydrogen gas that is produced using renewable energy sources such as wind or solar power through a process called electrolysis. The green hydrogen supply chain includes several interconnected entities such as renewable energy providers electrolysers distribution facilities and consumers. Although there have been many studies about green hydrogen little attention has been devoted to green hydrogen supply chain risk identification and analysis especially for hard-to-abate sectors in Europe. This research contributes to existing knowledge by identifying and analysing the European region’s green hydrogen supply chain risk factors. Using a Delphi method 7 categories and 43 risk factors are identified based on the green hydrogen supply chain experts’ opinions. The best-worst method is utilised to determine the importance weights of the risk categories and risk factors. High investment of capital for hydrogen production and delivery technology was the highest-ranked risk factor followed by the lack of enough capacity for electrolyser and policy & regulation development. Several mitigation strategies and policy recommendations are proposed for high-importance risk factors. This study provides novelty in the form of an integrated approach resulting in a scientific ranking of the risk factors for the green hydrogen supply chain. The results of this study provide empirical evidence which corroborates with previous studies that European countries should endeavour to create comprehensive and supportive standards and regulations for green hydrogen supply chain implementation.
Distributionally Robust Optimal Scheduling of Integrated Energy Systems Including Hydrogen Fuel Cells Considering Uncertainties
Aug 2023
Publication
The economic operation of the integrated energy system faces the problems of coupling between energy production and conversion equipment in the system and the imbalance of various energy demands. Therefore taking system safety as the constraint and minimum economic cost as the objective function including fuel cost operation and maintenance cost this paper proposes the operation dispatching model of the integrated energy system based on hydrogen fuel cell (HFC) including HFC photovoltaic wind turbine electric boiler electric chiller absorption chiller electric energy storage and thermal energy storage equipment. On this basis a distributionally robust optimization (DRO) model is introduced to deal with the uncertainty of wind power and photovoltaic output. In the distributionally robust optimization model Kullback–Leibler (KL) divergence is used to construct an ambiguity set which is mainly used to describe the prediction errors of renewable energy output. Finally the DRO economic dispatching model of the HFC integrated energy system (HFCIES) is established. Besides based on the same load scenario the economic benefits of hybrid energy storage equipment are discussed. The dispatching results show that compared with the scenario of only electric energy storage and only thermal energy storage the economic cost of the scenario of hybrid electric and thermal storage can be reduced by 3.92% and 7.55% respectively and the use of energy supply equipment can be reduced and the stability of the energy storage equipment can be improved.
Green Hydrogen for Heating and its Impact on the Power System
Jun 2021
Publication
With a relatively high energy density hydrogen is attracting increasing attention in research commercial and political spheres specifically as a fuel for residential heating which is proving to be a difficult sector to decarbonise in some circumstances. Hydrogen production is dependent on the power system so any scale use of hydrogen for residential heating will impact various aspects of the power system including electricity prices and renewable generation curtailment (i.e. wind solar). Using a linearised optimal power flow model and the power infrastructure on the island of Ireland this paper examines least cost optimal investment in electrolysers in the presence of Ireland's 70% renewable electricity target by 2030. The introduction of electrolysers in the power system leads to an increase in emissions from power generation which is inconsistent with some definitions of green hydrogen. Electricity prices are marginally higher with electrolysers whereas the optimal location of electrolysers is driven by a combination of residential heating demand and potential surplus power supplies at electricity nodes.
The Role of Power-to-hydrogen in Carbon Neutral Energy and Industrial Systems: Case Finland
Aug 2023
Publication
To combat climate change decarbonization measures are undertaken across the whole energy sector. Industry and transportation sectors are seen as difficult sectors to decarbonize with green hydrogen being proposed as a solution to achieve decarbonization in these sectors. While many methods of introducing hydrogen to these sectors are present in literature few systemlevel works study the specific impacts of large-scale introduction has on power and heat sectors in an energy system. This contribution examines the effects of introducing hydrogen into a Finnish energy system in 2040 by conducting scenario simulations in EnergyPLAN – software. Primary energy consumption and CO2 emissions of the base scenario and hydrogen scenarios are compared. Additionally the differences between a constant and flexible hydrogen production profile are studied. Introducing hydrogen increases electricity consumption by 31.9 % but reduces CO2 emissions by 71.5 % and fossil energy consumption by 72.6%. The flexible hydrogen profile lowers renewable curtailment and improves energy efficiency but requires economically unfeasible hydrogen storage. Biomass consumption remains high and is not impacted significantly by the introduction of hydrogen. Additional measures in other sectors are needed to ensure carbon neutrality.
A Control Strategy Study of a Renewable CCHP Energy System Integrated Hydrogen Production Unit - A Case Study of an Industrial Park in Jiangsu Province
Aug 2023
Publication
This paper describes a renewable energy system incorporating a hydrogen production unit to address the imbalance between energy supply and demand. The system utilizes renewable energy and hydrogen production energy to release energy to fill the power gap during peak demand power supply for demand peaking and valley filling. The system is optimized by analyzing marine predator behavioral logic and optimizing the system for maximum operational efficiency and best economic value. The results of the study show that after the optimized scheduling of the hydrogen production coupled renewable energy integrated energy system using the improved marine predator optimization algorithm the energy distribution of the whole energy system is good with the primary energy saving rate maintained at 24.75% the CO2 emission reduction rate maintained at 42.32% and the cost saving rate maintained at 0.78%. In addition this paper uses the Adaboost-BP prediction model to predictively analyze the system. The results show that as the price of natural gas increases the advantages of the combined hydrogen production renewable integrated energy system proposed in this paper become more obvious and the cumulative cost over three years is better than other related systems. These research results provide an important reference for the application and development of the system.
A Systematic Review: The Role of Emerging Carbon Capture and Conversion Rechnologies for Energy Transition to Clean Hydrogen
Feb 2024
Publication
The exploitation of fossil fuels in various sectors such as power and heat generation and the transportation sector has been the primary source of greenhouse gas (GHG) emissions which are the main contributors to global warming. Qatar's oil and gas sector notably contributes to CO2 emissions accounting for half of the total emissions. Globally it is essential to transition into cleaner fossil fuel production to achieve carbon neutrality on a global scale. In this paper we focus on clean hydrogen considering carbon capture to make hydrogen a viable low carbon energy alternative for the transition to clean energy. This paper systematically reviews emerging technologies in carbon capture and conversion (CCC). First the road map stated by the Intergovernmental Panel on Climate Change (IPCC) to reach carbon neutrality is discussed along with pathways to decarbonize the energy sector in Qatar. Next emerging CO2 removal technologies including physical absorption using ionic liquids chemical looping and cryogenics are explored and analyzed regarding their advancement and limitations CO2 purity scalability and prospects. The advantages limitations and efficiency of the CO2 conversion technology to value-added products are grouped into chemical (plasma catalysis electrochemical and photochemical) and biological (photosynthetic and non-photosynthetic). The paper concludes by analyzing pathways to decarbonize the energy sector in Qatar via coupling CCC technologies for low-carbon hydrogen highlighting the challenges and research gaps.
How to Connect Energy Islands: Trade-offs Between Hydrogen and Electricity Infrastructure
Apr 2023
Publication
In light of offshore wind expansions in the North and Baltic Seas in Europe further ideas on using offshore space for renewable-based energy generation have evolved. One of the concepts is that of energy islands which entails the placement of energy conversion and storage equipment near offshore wind farms. Offshore placement of electrolysers will cause interdependence between the availability of electricity for hydrogen production and for power transmission to shore. This paper investigates the trade-offs between integrating energy islands via electricity versus hydrogen infrastructure. We set up a combined capacity expansion and electricity dispatch model to assess the role of electrolysers and electricity cables given the availability of renewable energy from the islands. We find that the electricity system benefits more from connecting close-to-shore wind farms via power cables. In turn electrolysis is more valuable for far-away energy islands as it avoids expensive long-distance cable infrastructure. We also find that capacity investment in electrolysers is sensitive to hydrogen prices but less to carbon prices. The onshore network and congestion caused by increased activity close to shore influence the sizing and siting of electrolysers.
Subcooled Liquid Hydrogen Technology for Heavy-Duty Trucks
Jan 2024
Publication
Subcooled liquid hydrogen (sLH2) is an onboard storage as well as a hydrogen refueling technology that is currently being developed by Daimler Truck and Linde to boost the mileage of heavy-duty trucks while also improving performance and reducing the complexity of hydrogen refueling stations. In this article the key technical aspects advantages challenges and future developments of sLH2 at vehicle and infrastructure levels will be explored and highlighted.
Design Investigation of Potential Long-Range Hydrogen Combustion Blended Wing Body Aircraft with Future Technologies
Jun 2023
Publication
Present work investigates the potential of a long-range commercial blended wing body configuration powered by hydrogen combustion engines with future airframe and propulsion technologies. Future technologies include advanced materials load alleviation techniques boundary layer ingestion and ultra-high bypass ratio engines. The hydrogen combustion configuration was compared to the configuration powered by kerosene with respect to geometric properties performance characteristics energy demand equivalent CO2 emissions and Direct Operating Costs. In addition technology sensitivity studies were performed to assess the potential influence of each technology on the configuration. A multi-fidelity sizing methodology using low- and mid-fidelity methods for rapid configuration sizing was created to assess the configuration and perform robust analyses and multi-disciplinary optimizations. To assess potential uncertainties of the fidelity of aerodynamic analysis tools high-fidelity aerodynamic analysis and optimization framework MACHAero was used for additional verification. Comparison of hydrogen and kerosene blended wing body aircraft showed a potential reduction of equivalent CO2 emission by 15% and 81% for blue and green hydrogen compared to the kerosene blended wing body and by 44% and 88% with respect to a conventional B777-300ER aircraft. Advancements in future technologies also significantly affect the geometric layout of aircraft. Boundary layer ingestion and ultra-high bypass ratio engines demonstrated the highest potential for fuel reduction although both technologies conflict with each other. However operating costs of hydrogen aircraft could establish a significant problem if pessimistic and base hydrogen price scenarios are achieved for blue and green hydrogen respectively. Finally configurational problems featured by classical blended wing body aircraft are magnified for the hydrogen case due to the significant volume requirements to store hydrogen fuel.
The Role of Hydrogen for the Defossilization of the German Chemical Industry
Apr 2023
Publication
Within the European Green Deal the European industry is summoned to transform towards a green and circular economy to reduce CO2-emissions and reach climate goals. Special focus is on the chemical industry to boost recycling processes for plastics exploit resource efficiency potentials and switch to a completely renewable feedstock (defossilization). Despite common understanding that drastic changes have to take place it is yet unknown how the industrial transformation should be accomplished. This work explains how a cost-optimal defossilization of the chemical industry in the context of national greenhouse gas (GHG) mitigation strategies look like. The central part of this investigation is based on a national energy system model to optimize the future energy system design of Germany as a case study for a highly industrialized country. A replacement of fossil-based feedstocks by renewable feedstocks leads to a significant increase in hydrogen demand by þ40% compared to a reference scenario. The resulting demand of hydrogen-based energy carriers including the demand for renewable raw materials must be produced domestically or imported. This leads to cumulative additional costs of the transformation that are 32% higher than those of a reference scenario without defossilization of the industry. Fischer-Tropsch synthesis and the methanol-to-olefins route can be identified as key technologies for the defossilization of the chemical industry.
Current State of Technology of Fuel Cell Power Systems for Autonomous Underwater Vehicles
Jul 2014
Publication
Autonomous Underwater Vehicles (AUVs) are vehicles that are primarily used to accomplish oceanographic research data collection and auxiliary offshore tasks. At the present time they are usually powered by lithium-ion secondary batteries which have insufficient specific energies. In order for this technology to achieve a mature state increased endurance is required. Fuel cell power systems have been identified as an effective means to achieve this endurance but no implementation in a commercial device has yet been realized. This paper summarizes the current state of development of the technology in this field of research. First the most adequate type of fuel cell for this application is discussed. The prototypes and design concepts of AUVs powered by fuel cells which have been developed in the last few years are described. Possible commercial and experimental fuel cell stack options are analyzed examining solutions adopted in the analogous aerial vehicle applications as well as the underwater ones to see if integration in an AUV is feasible. Current solutions in oxygen and hydrogen storage systems are overviewed and energy density is objectively compared between battery power systems and fuel cell power systems for AUVs. A couple of system configuration solutions are described including the necessary lithium-ion battery hybrid system. Finally some closing remarks on the future of this technology are given.
Methanol, a Plugin Marine Fuel for Green House Gas Reduction—A Review
Jan 2024
Publication
The escalating global demand for goods transport via shipping has heightened energy consumption impacting worldwide health and the environment. To mitigate this international organizations aim to achieve complete fuel desulphurization and decarbonization by 50% by 2050. Investigating eco-friendly fuels is crucial particularly those with a reduced carbon and zero sulfur content. Methanol derived mainly from renewable sources and produced by carbon dioxide’s hydrogenation method stands out as an effective solution for GHG reduction. Leveraging its favorable properties global scalability and compatibility with the existing infrastructure especially LNGs methanol proves to be a cost-efficient and minimally disruptive alternative. This review explores methanol’s role as a hybrid maritime fuel emphasizing its ecological production methods advantages and challenges in the shipping industry’s green transition. It discusses the environmental impacts of methanol use and analyzes economic factors positioning methanol not only as an ecofriendly option but also as a financially prudent choice for global shipping. Methanol is efficient and cost-effective and excels over MGO especially in new ships. It is economically advantageous with decreasing investment costs compared to LNG while providing flexibility without specialized pressure tanks. Global marine fuel trends prioritize fuel traits accessibility and environmental considerations incorporating factors like policies emissions bunkering and engine adaptability during transitions.
Study on Hydrogen Substitution in a Compressed Natural Gas Spark-ignition Passenger Car Engine
Jun 2023
Publication
Hydrogen substitution in applications fueled by compressed natural gas arises as a potential alternative to fossil fuels and it may be the key to an effective hydrogen economy transition. The reduction of greenhouse gas emissions especially carbon dioxide and unburned methane as hydrogen is used in transport and industry applications makes its use an attractive option for a sustainable future. The purpose of this research is to examine the gradual adoption of hydrogen as a fuel for light-duty transportation. Particularly the study focuses on evaluating the performance and emissions of a single-cylinder port fuel injection spark-ignition engine as hydrogen is progressively increased in the natural gas-based fuel blend. Results identify the optimal conditions for air dilution and engine operation parameters to achieve the best performance. They corroborate that the dilution rate has to be adjusted to control pollutant emissions as the percentage of hydrogen is increased. Moreover the study identifies the threshold for hydrogen substitution below which the reduction of carbon dioxide emissions due to efficiency gains is negligible compared to the reduction of the carbon content in the fuel blend. These findings will help reduce the environmental footprint of light-duty transportation not only in the long term but also in the short and medium terms.
An Artificial Neural Network-Based Fault Diagnostics Approach for Hydrogen-Fueled Micro Gas Turbines
Feb 2024
Publication
The utilization of hydrogen fuel in gas turbines brings significant changes to the thermophysical properties of flue gas including higher specific heat capacities and an enhanced steam content. Therefore hydrogen-fueled gas turbines are susceptible to health degradation in the form of steam-induced corrosion and erosion in the hot gas path. In this context the fault diagnosis of hydrogen-fueled gas turbines becomes indispensable. To the authors’ knowledge there is a scarcity of fault diagnosis studies for retrofitted gas turbines considering hydrogen as a potential fuel. The present study however develops an artificial neural network (ANN)-based fault diagnosis model using the MATLAB environment. Prior to the fault detection isolation and identification modules physics-based performance data of a 100 kW micro gas turbine (MGT) were synthesized using the GasTurb tool. An ANN-based classification algorithm showed a 96.2% classification accuracy for the fault detection and isolation. Moreover the feedforward neural network-based regression algorithm showed quite good training testing and validation accuracies in terms of the root mean square error (RMSE). The study revealed that the presence of hydrogen-induced corrosion faults (both as a single corrosion fault or as simultaneous fouling and corrosion) led to false alarms thereby prompting other incorrect faults during the fault detection and isolation modules. Additionally the performance of the fault identification module for the hydrogen fuel scenario was found to be marginally lower than that of the natural gas case due to assumption of small magnitudes of faults arising from hydrogen-induced corrosion.
Performance Assessment and Optimization of the Ultra-High Speed Air Compressor in Hydrogen Fuel Cell Vehicles
Feb 2024
Publication
Air compressors in hydrogen fuel cell vehicles play a crucial role in ensuring the stability of the cathode air system. However they currently face challenges related to low efficiency and poor stability. To address these issues the experimental setup for the pneumatic performance of air compressors is established. The effects of operational parameters on energy consumption efficiency and mass flow rate of the air compressor are revealed based on a Morris global sensitivity analysis. Considering a higher flow rate larger efficiency and lower energy consumption simultaneously the optimal operating combination of the air compressor is determined based on grey relational multi-objective optimization. The optimal combination of operational parameters consisted of a speed of 80000 rpm a pressure ratio of 1.8 and an inlet temperature of 18.3 °C. Compared to the average values the isentropic efficiency achieved a 48.23% increase and the mass flow rate rose by 78.88% under the optimal operational combination. These findings hold significant value in guiding the efficient and stable operation of air compressors. The comprehensive methodology employed in this study is applicable further to investigate air compressors for hydrogen fuel cell vehicles.
Optimal Sizing of a Stand-Alone Hybrid Power System Based on Battery/Hydrogen with an Improved Ant Colony Optimization
Sep 2016
Publication
A distributed power system with renewable energy sources is very popular in recent years due to the rapid depletion of conventional sources of energy. Reasonable sizing for such power systems could improve the power supply reliability and reduce the annual system cost. The goal of this work is to optimize the size of a stand-alone hybrid photovoltaic (PV)/wind turbine (WT)/battery (B)/hydrogen system (a hybrid system based on battery and hydrogen (HS-BH)) for reliable and economic supply. Two objectives that take the minimum annual system cost and maximum system reliability described as the loss of power supply probability (LPSP) have been addressed for sizing HS-BH from a more comprehensive perspective considering the basic demand of load the profit from hydrogen which is produced by HS-BH and an effective energy storage strategy. An improved ant colony optimization (ACO) algorithm has been presented to solve the sizing problem of HS-BH. Finally a simulation experiment has been done to demonstrate the developed results in which some comparisons have been done to emphasize the advantage of HS-BH with the aid of data from an island of Zhejiang China.
The Fuel Flexibility of Gas Turbines: A Review and Retrospective Outlook
May 2023
Publication
Land-based gas turbines (GTs) are continuous-flow engines that run with permanent flames once started and at stationary pressure temperature and flows at stabilized load. Combustors operate without any moving parts and their substantial air excess enables complete combustion. These features provide significant space for designing efficient and versatile combustion systems. In particular as heavy-duty gas turbines have moderate compression ratios and ample stall margins they can burn not only high- and medium-BTU fuels but also low-BTU ones. As a result these machines have gained remarkable fuel flexibility. Dry Low Emissions combustors which were initially confined to burning standard natural gas have been gradually adapted to an increasing number of alternative gaseous fuels. The paper first delivers essential technical considerations that underlie this important fuel portfolio. It then reviews the spectrum of alternative GT fuels which currently extends from lean gases (coal bed coke oven blast furnace gases . . . ) to rich refinery streams (LPG olefins) and from volatile liquids (naphtha) to heavy hydrocarbons. This “fuel diet” also includes biogenic products (biogas biodiesel and ethanol) and especially blended and pure hydrogen the fuel of the future. The paper also outlines how historically land-based GTs have gradually gained new fuel territories thanks to continuous engineering work lab testing experience extrapolation and validation on the field.
Impact of Medium-pressure Direct Injection Engine Fueled by Hydrogen
Dec 2023
Publication
In the automotive sector hydrogen is being increasingly explored as an alternative fuel to replace conventional carbon-based fuels. Its combustion characteristics make it well-suited for adaptation to internal combustion engines. The wide flammability range of hydrogen allows for higher dilution conditions resulting in enhanced combustion efficiency. When combined with lean combustion strategies hydrogen significantly reduces environmental impact virtually eliminating carbon dioxide and nitrogen oxide emissions while maintaining high thermal efficiency. This paper aims to assess the potential of using an outwardly opening poppet valve hydrogen direct injection (DI) system in a small engine for light-duty applications. To achieve this a comparison of performance emission levels and combustion parameters is conducted on a single-cylinder spark-ignition (SI) research engine fueled by hydrogen using both port fuel injection (PFI) and this new direct injection system. Two different engine loads are measured at multiple air dilution and injection timing conditions. The results demonstrate notable efficiency improvements ranging from 0.6% to 1.1% when transitioning from PFI to DI. Accurate control of injection timing is essential for achieving optimal performance and low emissions. Delaying the start of injection results in a 7.6% reduction in compression work at low load and a 3.9% reduction at high load. This results in a 3.1-3.2% improvement in ISFC in both load conditions considered.
Transitioning towards Net-Zero Emissions in Chemical and Process Industries: A Holistic Perspective
Sep 2023
Publication
Given the urgency to combat climate change and ensure environmental sustainability this review examines the transition to net-zero emissions in chemical and process industries. It addresses the core areas of carbon emissions reduction efficient energy use and sustainable practices. What is new however is that it focuses on cutting-edge technologies such as biomass utilization biotechnology applications and waste management strategies that are key drivers of this transition. In particular the study addresses the unique challenges faced by industries such as cement manufacturing and highlights the need for innovative solutions to effectively reduce their carbon footprint. In particular the role of hydrogen as a clean fuel is at the heart of revolutionizing the chemical and process sectors pointing the way to cleaner and greener operations. In addition the manuscript explores the immense importance of the European Green Deal and the Sustainable Development Goals (SDGs) for the chemical industry. These initiatives provide a clear roadmap and framework for advancing sustainability driving innovation and reducing the industry’s environmental impact and are a notable contribution to the existing body of knowledge. Ultimately alignment with the European Green Deal and the SDGs can bring numerous benefits to the chemical industry increasing its competitiveness promoting societal well-being and supporting cross-sector collaboration to achieve shared sustainability goals. By highlighting the novelty of integrating cutting-edge technologies addressing unique industrial challenges and positioning global initiatives this report offers valuable insights to guide the chemical and process industries on their transformative path to a sustainable future.
Experimental Aspects of the Hydrogen Use at Diesel Engine
May 2017
Publication
In the global content regarding the impact on the environmental of the gases emissions resulted from the fossil fuels combustion aspect discussed on the 2015 Paris Climate Conference contribute to the necessity of searching of alternative energy from durable and renewable resources. The purpose of the paper is the use of hydrogen fuelling at truck diesel engine in order to improves engine efficiency and pollutant performance hydrogen being injected into the inlet manifold. Experimental results show better energetic and pollution performance of the dual fuelled engine due to the improvement of the combustion process and reduction of carbon content.
Design and Implementation of the Safety System of a Solar-driven Smart Micro-grid Comprising Hydrogen Production for Electricity & Cooling Co-generation
Sep 2023
Publication
This article presents a comprehensive description of the safety system of a real installation that comprises PV panels lithium-ion batteries an electrolyzer H2 storage a fuel cell and a barium chloride/ammonia thermochemical prototype for heat recovery and cooling production. Such a system allows for the increase of the overall efficiency of the H2 chain by exploiting the waste heat and transforming it into a cooling effect particularly useful in tropical regions like French Polynesia. The study provides a great deal of detail regarding practical aspects of the system implementation and a consistent reference to the relevant standards and regulations applicable to the subject matter. More specifically the study covers the ATEX classification of the site the safety features of each component the electrical power distribution the main safety instrumented system fire safety and the force ventilation system. The study also includes safety assessment and a section on lessons learned that could serve as guidance for future installations. In addition an extensive amount of technical data is readily available to the reader in repository (P&ID electrical diagrams etc.).
Green Hydrogen for Ammonia Production - A Case for the Netherlands
Jul 2023
Publication
An integrated system is studied to supply green hydrogen feedstock for ammonia production in the Netherlands. The system is modeled to compare wind and solar resources when coupled to Alkaline Electrolysis (AEL) and Proton Exchange Membrane Electrolysis (PEMEL) technologies with a compressed hydrogen storage system. The nominal installed capacity of the electrolysis plant is around 2.3 GW with the most suitable energy source offshore wind and the preferred storage technology pressurized tubes. For Alkaline Electrolysis and Proton Exchange Membrane Electrolysis technologies the levelized cost of hydrogen is 5.30 V/kg H2 and 6.03 V/kg H2 respectively.
Prospective Assessment of Transformation Pathways Toward Low-carbon Steelmaking: Evaluating Economic and Climate Impacts in Germany
Jan 2024
Publication
Due to climate change there is an urgent need to decarbonize high-emission industries. As coal-based operations predominate in primary steelmaking the steel industry offers an exceptionally high potential for reducing greenhouse gas emissions. Alternative processes for almost fully decarbonized primary steelmaking exist but require substantial investments by steelmakers for their implementation while maintaining desired production levels during the transformation periods. In this context the energy carriers required change such that the transformation of the steelmaking processes is deeply intertwined with the transformation of the background system. For the first time we evaluate potential transformation pathways from the steelmakers’ perspective using a prospective life cycle assessment approach. We find that hydrogen may facilitate a reduction of direct emissions by around 96 % compared to conventional steelmaking in 2050. However indirect emissions remain at a high level throughout the transformation period unless the upstream stages of the value chain are transformed accordingly.
H2-powered Aviation - Design and Economics of Green LH2 Supply for Airports
Aug 2023
Publication
The economic competitiveness of hydrogen-powered aviation highly depends on the supply costs of green liquid hydrogen to enable true-zero CO2 flying. This study uses non-linear energy system optimization to analyze three main liquid hydrogen (LH2) supply pathways for five locations. Final liquid hydrogen costs at the dispenser supply costs could reach 2.04 USD/kgLH2 in a 2050 base case scenario for locations with strong renewable energy source conditions. This could lead to cost-competitive flying with hydrogen. Reflecting techno-economic uncertainties in two additional scenarios the liquid hydrogen cost span at all five airport locations ranges between 1.37–3.48 USD/kgLH2 if hydrogen import options from larger hydrogen markets are also available. Import setups are of special importance for airports with a weaker renewable energy source situation e.g. selected Central European airports. There on-site supply might not only be too expensive but space requirements for renewable energy sources could be too large for feasible implementation in densely populated regions. Furthermore main costs for liquid hydrogen are caused by renewable energy sources electrolysis systems and liquefaction plants. Seven detailed design rules are derived for optimized energy systems for these and the storage components. This and the cost results should help infrastructure planners and general industry and policy players prioritize research and development needs
Conversion of a Small-Size Passenger Car to Hydrogen Fueling: 0D/1D Simulation of EGR and Related Flow Limitations
Jan 2024
Publication
Hydrogen is seen as a prime choice for complete replacement of gasoline so as to achieve zero-emissions energy and mobility. Combining the use of this alternative fuel with a circular economy approach for giving new life to the existing fleet of passenger cars ensures further benefits in terms of cost competitiveness. Transforming spark ignition (SI) engines to H2 power requires relatively minor changes and limited added components. Within this framework the conversion of a small-size passenger car to hydrogen fueling was evaluated based on 0D/1D simulation. One of the methods to improve efficiency is to apply exhaust gas recirculation (EGR) which also lowers NOx emissions. Therefore the previous version of the quasi-dimensional model was modified to include EGR and its effects on combustion. A dedicated laminar flame speed model was implemented for the specific properties of hydrogen and a purpose-built sub-routine was implemented to correctly model the effects of residual gas at the start of combustion. Simulations were performed in several operating points representative of urban and highway driving. One of the main conclusions was that highpressure recirculation was severely limited by the minimum flow requirements of the compressor. Low-pressure EGR ensured wider applicability and significant improvement of efficiency especially during partial-load operation specific to urban use. Another benefit of recirculation was that pressure rise rates were predicted to be more contained and closer to the values expected for gasoline fueling. This was possible due to the high tolerance of H2 to the presence of residual gas.
Techno-economic Analysis of Direct Air Carbon Capture and Hydrogen Production Integrated with a Small Modular Reactor
Dec 2023
Publication
This study aims to explore the techno-economic potential of harnessing waste heat from a Small Modular Reactor (SMR) to fuel Direct Air Carbon Capture (DACC) and High Temperature Steam Electrolysis (HTSE) technologies. The proposed system’s material flows and energy demands are modelled via the ASPEN Plus v12.1 where results are utilised to provide estimates of the Levelised Cost of DACC (LCOD) and Levelised Cost of Hydrogen (LCOH). The majority of thermal energy and electrical utilities are assumed to be supplied directly by the SMR. A sensitivity analysis is then performed to investigate the effects of core operational parameters of the system. Key results indicate levelised costs of 4.66 $/kgH2 at energy demands of 34.37 kWh/kgH2 and 0.02 kWh/kgH2 thermal for HTSE hydrogen production and 124.15 $/tCO2 at energy demands of 31.67 kWh/tCO2 and 126.33 kWh/tCO2 thermal for carbon capture; parameters with most impact on levelised costs are air intake and steam feed for LCOD and LCOH respectively. Both levelised costs i.e. LCOD and LCOH would decrease with the production scale. The study implies that an integrated system of DACC and HTSE provided the best cost-benefit results however the cost-benefit analysis is heavily subjective to geography politics and grid demand.
Feasibility of Green Hydrogen-Based Synthetic Fuel as a Carbon Utilization Option: An Economic Analysis
Sep 2023
Publication
Singapore has committed to achieving net zero emissions by 2050 which requires the pursuit of multiple decarbonization pathways. CO2 utilization methods such as fuel production may provide a fast interim solution for carbon abatement. This paper evaluates the feasibility of green hydrogen-based synthetic fuel (synfuel) production as a method for utilizing captured CO2. We consider several scenarios: a baseline scenario with no changes local production of synfuel with hydrogen imports and overseas production of synfuel with CO2 exports. This paper aims to determine a CO2 price for synfuel production evaluate the economic viability of local versus overseas production and investigate the effect of different cost parameters on economic viability. Using the current literature we estimate the associated production and transport costs under each scenario. We introduce a CO2 utilization price (CUP) that estimates the price of utilizing captured CO2 to produce synfuel and an adjusted CO2 utilization price (CCUP) that takes into account the avoided emissions from crude oil-based fuel production. We find that overseas production is more economically viable compared to local production with the best case CCUP bounds giving a range of 142–148 $/tCO2 in 2050 if CO2 transport and fuel shipping costs are low. This is primarily due to the high cost of hydrogen feedstock especially the transport cost which can offset the combined costs of CO2 transport and fuel shipping. In general we find that any increase in the hydrogen feedstock cost can significantly affect the CCUP for local production. Sensitivity analysis reveals that hydrogen transport cost has a significant impact on the viability of local production and if this cost is reduced significantly local production can be cheaper than overseas production. The same is true if the economies of scale for local production is significantly better than overseas production. A significantly lower carbon capture cost can also the reduce the CCUP significantly.
A Renewable Power System for an Off-grid Sustainable Telescope Fueled by Solar Power, Batteries and Green Hydrogen
Jul 2023
Publication
A large portion of astronomy’s carbon footprint stems from fossil fuels supplying the power demand of astronomical observatories. Here we explore various isolated low-carbon power system setups for the newly planned Atacama Large Aperture Submillimeter Telescope and compare them to a business-as-usual diesel power generated system. Technologies included in the designed systems are photovoltaics concentrated solar power diesel generators batteries and hydrogen storage. We adapt the electricity system optimization model highRES to this case study and feed it with the telescope’s projected energy demand cost assumptions for the year 2030 and site-specific capacity factors. Our results show that the lowest-cost system with LCOEs of $116/MWh majorly uses photovoltaics paired with batteries and fuel cells running on imported and on-site produced green hydrogen. Some diesel generators run for backup. This solution would reduce the telescope’s power-side carbon footprint by 95% compared to the businessas-usual case.
Energy and Greenhouse Gases Life Cycle Assessment of Electric and Hydrogen Buses: A Real-world Case Study in Bolzano Italy
May 2023
Publication
The transportation sector plays an important role in the current effort towards the control of global warming. Against this backdrop electrification is currently attracting attention as the life cycle environmental performance of different powertrain technologies is critically assessed. In this study a life cycle analysis of the public transportation buses was performed. The scope of the analysis is to compare the energy and global warming performances of the different powertrain technologies in the city fleet: diesel full electric and hydrogen buses. Real world monitored data were used in the analysis for the energy consumptions of the buses and to produce hydrogen in Bolzano. Compared to the traditional diesel buses the electric vehicles showed a 43% reduction of the non-renewable primary energy demand and a 33% of the global warming potential even in the worst consequential scenario considered. The switch to hydrogen buses leads to very different environmental figures: from very positive if it contributes to a further penetration of renewable electricity to hardly any difference if hydrogen from steam-methane reforming is used to clearly negative ones (approximately doubling the impacts) if a predominantly fossil electricity mix is used in the electrolysis.
Real-Time Energy Management Strategy of Hydrogen Fuel Cell Hybrid Electric Vehicles Based on Power Following Strategy–Fuzzy Logic Control Strategy Hybrid Control
Nov 2023
Publication
Fuel cell hybrid electric vehicles have the advantages of zero emission high efficiency and fast refuelling etc. and are one of the key directions for vehicle development. The energy management problem of fuel cell hybrid electric vehicles is the key technology for power distribution. The traditional power following strategy has the advantage of a real-time operation but the power correction is usually based only on the state of charge of a lithium battery which causes the operating point of the fuel cell to be in the region of a low efficiency. To solve this problem this paper proposes a hybrid power-following-fuzzy control strategy where a fuzzy logic control strategy is used to optimise the correction module based on the power following strategy which regulates the state of charge while correcting the output power of the fuel cell towards the efficient operating point. The results of the joint simulation with Matlab + Advisor under the Globally Harmonised Light Vehicle Test Cycle Conditions show that the proposed strategy still ensures the advantages of real-time energy management and for the hydrogen fuel cell the hydrogen consumption is reduced by 13.5% and 4.1% compared with the power following strategy and the fuzzy logic control strategy and the average output power variability is reduced by 14.6% and 5.1% respectively which is important for improving the economy of the whole vehicle and prolonging the lifetime of fuel cell.
The Role of Biomass Gasification in Low-carbon Energy and Transport Systems
Mar 2021
Publication
The design of future energy systems requires the efficient use of all available renewable resources. Biomass can complement variable renewable energy sources by ensuring energy system flexibility and providing a reliable feedstock to produce renewable fuels. We identify biomass gasification suitable to utilise the limited biomass resources efficiently. In this study we inquire about its role in a 100% renewable energy system for Denmark and a net-zero energy system for Europe in the year 2050 using hourly energy system analysis. The results indicate bio-electrofuels produced from biomass gasification and electricity to enhance the utilisation of wind and electrolysis and reduce the energy system costs and fuels costs compared to CO2-electrofuels from carbon capture and utilisation. Despite the extensive biomass use overall biomass consumption would be higher without biomass gasification. The production of electromethanol shows low biomass consumption and costs while Fischer-Tropsch electrofuels may be an alternative for aviation. Syngas from biomass gasification can supplement biogas in stationary applications as power plants district heat or industry but future energy systems must meet a balance between producing transport fuels and syngas for stationary units. CO2-electrofuels are found complementary to bio-electrofuels depending on biomass availability and remaining non-fossil CO2 emitters
A Review on the Research Progress and Application of Compressed Hydrogen in the Marine Hydrogen Fuel Cell Power System
Jan 2024
Publication
The urgency to mitigate greenhouse gas emissions from maritime vessels has intensified due to the increasingly stringent directives set forth by the International Maritime Organization (IMO). These directives specifically address energy efficiency enhancements and emissions reduction within the shipping industry. In this context hydrogen is the much sought after fuel for all the global economies and its applications for transportation and propulsion in particular is crucial for cutting down carbon emissions. Nevertheless the realization of hydrogen-powered vessels is confronted by substantial technical hurdles that necessitate thorough examination. This study undertakes a comprehensive analysis encompassing diverse facets including distinct variations of hydrogen fuel cells hydrogen internal combustion engines safety protocols associated with energy storage as well as the array of policies and commercialization endeavors undertaken globally for the advancement of hydrogen-propelled ships. By amalgamating insights from these multifaceted dimensions this paper adeptly encapsulates the myriad challenges intrinsic to the evolution of hydrogen-fueled maritime vessels while concurrently casting a forward-looking gaze on their prospective trajectory.
Evaluation of the Potential for Distributed Generation of Green Hydrogen Using Metal-hydride Storage Methods
May 2023
Publication
This study presents methodology for the evaluation of appropriateness of a hydrogen generator for gas production in multiple distributed plants based on renewable energy sources. The general idea is to form hydrogen clusters integrated with storage and transportation. The paper focuses on the financial viability of the plants presenting the results of economic evaluation together with sensitivity analysis for various economic factors. The analyzed case study proves that over a wide range of parameters alkaline electrolyzers show favorable economic characteristics however a PEM-based plant is more resilient to changes in the price of electricity which is the main cost component in hydrogen generation. The study is enriched with an experimental investigation of low-pressure storage methods based on porous metal hydride tanks. The effectiveness of the tanks (β) compared to pressurized hydrogen tanks in the same volume and pressure is equal to β = 10.2. A solution is proposed whereby these can be used in a distributed hydrogen generation concept due to their safe and simple operation without additional costly equipment e.g. compressors. A method for evaluation of the avoided energy consumption as a function of the effectiveness of the tanks is developed. Avoided energy consumption resulting from implementing MH tanks equals 1.33 – 1.37 kWh per kilogram of hydrogen depending on the number of stages of a compressor. The methods proposed in this paper are universal and can be used for various green hydrogen facilities.
Deep Reinforcement Learning-Based Energy Management for Liquid Hydrogen-Fueled Hybrid Electric Ship Propulsion System
Oct 2023
Publication
This study proposed a deep reinforcement learning-based energy management strategy (DRL-EMS) that can be applied to a hybrid electric ship propulsion system (HSPS) integrating liquid hydrogen (LH2 ) fuel gas supply system (FGSS) proton-exchange membrane fuel cell (PEMFC) and lithium-ion battery systems. This study analyzed the optimized performance of the DRL-EMS and the operational strategy of the LH2 -HSPS. To train the proposed DRL-EMS a reward function was defined based on fuel consumption and degradation of power sources during operation. Fuel consumption for ship propulsion was estimated with the power for balance of plant (BOP) of the LH2 FGSS and PEMFC system. DRL-EMS demonstrated superior global and real-time optimality compared to benchmark algorithms namely dynamic programming (DP) and sequential quadratic programming (SQP)-based EMS. For various operation cases not used in training DRL-EMS resulted in 0.7% to 9.2% higher operating expenditure compared to DP-EMS. Additionally DRL-EMS was trained to operate 60% of the total operation time in the maximum efficiency range of the PEMFC system. Different hydrogen fuel costs did not affect the optimized operational strategy although the operating expenditure (OPEX) was dependent on the hydrogen fuel cost. Different capacities of the battery system did not considerably change the OPEX.
Hydrogen Consumption and Durability Assessment of Fuel Cell Vehicles in Realistic Driving
Jan 2024
Publication
This study proposes a predictive equivalent consumption minimization strategy (P-ECMS) that utilizes velocity prediction and considers various dynamic constraints to mitigate fuel cell degradation assessed using a dedicated sub-model. The objective is to reduce fuel consumption in real-world conditions without prior knowledge of the driving mission. The P-ECMS incorporates a velocity prediction layer into the Energy Management System. Comparative evaluations with a conventional adaptive-ECMS (A-ECMS) a standard ECMS with a well-tuned constant equivalence factor and a rule-based strategy (RBS) are conducted across two driving cycles and three fuel cell dynamic restrictions (|∕| ≤ 0.1 0.01 and 0.001 A∕cm2 ). The proposed strategy achieves H2 consumption reductions ranging from 1.4% to 3.0% compared to A-ECMS and fuel consumption reductions of up to 6.1% when compared to RBS. Increasing dynamic limitations lead to increased H2 consumption and durability by up to 200% for all tested strategies.
A Novel Layout for Combined Heat and Power Production for a Hospital Based on a Solid Oxide Fuel Cell
Feb 2024
Publication
This paper addresses the problem of the reduction in the huge energy demand of hospitals and health care facilities. The sharp increase in the natural gas price due to the Ukrainian–Russian war has significantly reduced economic savings achieved by combined heat and power (CHP) units especially for hospitals. In this framework this research proposes a novel system based on the integration of a reversible CHP solid oxide fuel cell (SOFC) and a photovoltaic field (PV). The PV power is mainly used for balancing the hospital load. The excess power production is exploited to produce renewable hydrogen. The SOFC operates in electrical tracking mode. The cogenerative heat produced by the SOFC is exploited to partially meet the thermal load of the hospital. The SOFC is driven by the renewable hydrogen produced by the plant. When this hydrogen is not available the SOFC is driven by natural gas. In fact the SOFC is coupled with an external reformer. The simulation model of the whole plant including the reversible SOFC PV and hospital is developed in the TRNSYS18 environment and MATLAB. The model of the hospital is calibrated by means of measured data. The proposed system achieves very interesting results with a primary energy-saving index of 33% and a payback period of 6.7 years. Therefore this energy measure results in a promising solution for reducing the environmental impact of hospital and health care facilities.
Maximisation of PV Energy Use and Performance Analysis of a Stand-alone PV-hydrogen System
Sep 2023
Publication
The development of clean hydrogen and photovoltaic (PV) systems is lagging behind the goals set in the Net Zero Emissions scenario of the International Energy Agency. For this reason efficient hydrogen production systems powered from renewable energy need to be deployed faster. This work presents an optimization procedure for a stand-alone fully PVpowered alkaline electrolysis system. The approach is based on the Particle Swarm Optimization algorithm to obtain the best configuration of the PV plant that powers the electrolyzer and its compressor. The best configuration is determined with one of three indicators: cost efficiency or wasted energy. The PV plant needs to be oversized 2.63 times with respect to the electrolyzer to obtain minimum cost while for high efficiency this number increases by 2%. Additionally the configuration that minimizes cost wasted energy or maximizes efficiency does not correspond to the configuration that maximizes the annual PV yield. Optimizing for cost results also leads to the best operation of the electrolyzer at partial loads than optimizing for efficiency or wasted energy.
Future of Hydrogen in Industry: Initial Industrial Site Surveys
Jul 2023
Publication
This is a summary report of a study which aimed to understand the safety feasibility cost and impacts for 7 industrial sites to switch from natural gas to 100% hydrogen for heating. The volunteer industrial sites:<br/>♦ are located away from industrial clusters<br/>♦ use natural gas to meet most of their energy demand<br/>♦ will likely be most impacted by decisions on the future of the natural gas grid<br/>We have published the report in order to share its findings with other industrial sites and wider industry in particular those considering hydrogen as an option for decarbonisation.<br/>Note that:<br/>♦ some work was carried out on a non-hydrogen alternative energy source but to a lesser level of detail and not to determine the optimal decarbonisation solution<br/>♦ the findings do not apply to other end user environments because of differences between these environments and the consumption of gas<br/>The study was commissioned in 2022 by the former Department for Business and Energy and undertaken by AECOM and their safety sub-contractor ESR.<br/>The evidence will inform strategic decisions in 2026 on the role of low carbon hydrogen as a replacement for natural gas heating.
Research on the Adaptability of Proton Exchange Membrane Electrolysis in Green Hydrogen-Electric Coupling System Under Multi-operating Conditions
Mar 2023
Publication
The green hydrogen–electric coupling system can consume locally generated renewable energy thereby improving energy utilization and enabling zero-carbon power supply within a certain range. This study focuses on a green hydrogen–electric coupling system that integrates photovoltaic energy storage and proton exchange membrane electrolysis (PEME). Firstly the impact of operating temperature power quality and grid auxiliary services on the characteristics of the electrolysis cell is analyzed and a voltage model and energy model for the cell are established. Secondly a multi-operating conditions adaptability experiment for PEME grid-connected operation is designed. A test platform consisting of a grid simulator simulated photovoltaic power generation system lithium battery energy storage system PEME and measurement and acquisition device is then built. Finally experiments are conducted to simulate multi-operating conditions such as temperature changes voltage fluctuations frequency offsets harmonic pollution and current adjustment speed. The energy efficiency and consumption is calculated based on the recorded data and the results are helpful to guide the operation of the system.
Renewable Marine Fuel Production for Decarbonised Maritime Shipping: Pathways, Policy Measures and Transition Dynamics
Jun 2023
Publication
This article investigates the potential of renewable and low-carbon fuel production for the maritime shipping sector using Sweden as a case in focus. Techno-economic modelling and socio-technical transition studies are combined to explore the conditions opportunities and barriers to decarbonising the maritime shipping industry. A set of scenarios have been developed considering demand assumptions and potential instruments such as carbon price energy tax and blending mandate. The study finds that there are opportunities for decarbonising the maritime shipping industry by using renewable marine fuels such as advanced biofuels (e.g. biomethanol) electrofuels (e.g. e-methanol) and hydrogen. Sweden has tremendous resource potential for bio-based and hydrogen-based renewable liquid fuel production. In the evaluated system boundary biomethanol presents the cheapest technology option while e-ammonia is the most expensive one. Green electricity plays an important role in the decarbonisation of the maritime sector. The results of the supply chain optimisation identify the location sites and technology in Sweden as well as the trade flows to bring the fuels to where the bunker facilities are potentially located. Biomethanol and hydrogen-based marine fuels are cost-effective at a carbon price beyond 100 €/tCO2 and 200 €/tCO2 respectively. Linking back to the socio-technical transition pathways the study finds that some shipping companies are in the process of transitioning towards using renewable marine fuels thereby enabling niche innovations to break through the carbon lock-in and eventually alter the socio-technical regime while other shipping companies are more resistant. Overall there is increasing pressure from (inter)national energy and climate policy-making to decarbonise the maritime shipping industry.
Evaluation of Process Simulation and Reactor Technologies of an Integrated Power-to-liquid Plant at a Cement Factory
Mar 2023
Publication
A novel carbon capture and utilization (CCU) process is described in which process-related carbon dioxide is captured from cement plant exhaust gas (10000 tons/year) and converted with green hydrogen in a Fischer Tropsch synthesis to liquid mainly paraffinic hydrocarbons (syncrude approx. 3000 tons/year) which is finally processed to polyolefins. This CCU process chain is simulated with the software package ASPEN Plus V12.1®. In a first step the influence of hydrogen production technology such as PEM and SOEC and reverse water-gas shift reactor (rWGS) technology (electrified and autothermal design) on plant specific efficiencies (Power-to-Liquid PtL carbon conversion) product volumes and investment operating and net production costs (NPC) is investigated. Furthermore process routes reducing the CO2 content in the Fischer Tropsch feed gas are elaborated implementing a CO2 separation unit or recycle streams back to the rWGS reactor. Unexpectedly CO2 capture and recycle streams back to the rWGS show no significant impact on the performance of each process scenario particularly in terms of the product quantity. However lower PtL efficiencies and higher NPC are noticeable for these cases. The techno-economic assessment reveals that the use of a SOEC and an electrified rWGS reactor offers the technologically best and economically most optimized process chain with NPC of 8.40 EUR/kgsyncrude a PtL efficiency of 54% and a carbon conversion of 85%.
A Review of the Integrated Renewable Energy Systems for Sustainable Urban Mobility
Aug 2022
Publication
Several challenges have emerged due to the increasing deterioration of urban mobility and its severe impacts on the environment and human health. Primary dependence on internal combustion engines that use petrol or diesel has led to poor air quality time losses noise traffic jams and further environmental pollution. Hence the transitions to using rail and or seaway-based public transportation cleaner fuels and electric vehicles are some of the ultimate goals of urban and national decision-makers. However battery natural gas hybrid and fuel cell vehicles require charging stations to be readily available with a sustainable energy supply within urban regions in different residential and business neighborhoods. This study aims to provide an updated and critical review of the concept and recent examples of urban mobility and transportation modes. It also highlights the adverse impacts of several air pollutants emitted from internal combustion engine vehicles. It also aims to shed light on several possible systems that integrate the electric vehicle stations with renewable energy sources. It was found that using certain components within the integrated system and connecting the charging stations with a grid can possibly provide an uninterrupted power supply to electric vehicles leading to less pollution which would encourage users to use more clean vehicles. In addition the environmental impact assessments as well as several implementation challenges are discussed. To this end the main implementation issues related to consumer incentives infrastructure and recommendations are also reported.
Fuel Cell Solution for Marine Applications
Sep 2021
Publication
With future regulations on the horizon port authorities and ship owners/operators are looking at alternative propulsion solutions to reduce emission. Fuel cell technology provides an attractive zeroemission solution to generate electric power on board using hydrogen as a fuel. Fuel cell systems are scalable from 200kW to multi-MW providing high efficiency dispatchable clean quiet power generation. Several innovative pilot projects are on the way to demonstrate the marine application of this proven technology. Electrification of propulsion systems is advancing and fuel cell technology provides the opportunity to produce on board large quantity of power with zero-emission using hydrogen as a fuel. We will present the value proposition of having a fuel cell power generator on board of an electric vessel while discussing the safety considerations with the fuel cell module and the onboard fuel storage. We will present some of our current fuel cell marine projects and review some of the product development considerations including system architecture and safety as well as hydrogen supply and on-board fuel storage.
Life Cycle Assessment of Electric Vehicles and Hydrogen Fuel Cell Vehicles Using the GREET Model—A Comparative Study
Apr 2021
Publication
Facing global warming and recent bans on the use of diesel in vehicles there is a growing need to develop vehicles powered by renewable energy sources to mitigate greenhouse gas and pollutant emissions. Among the various forms of non-fossil energy for vehicles hydrogen fuel is emerging as a promising way to combat global warming. To date most studies on vehicle carbon emissions have focused on diesel and electric vehicles (EVs). Emission assessment methodologies are usually developed for fast-moving consumer goods (FMCG) which are non-durable household goods such as packaged foods beverages and toiletries instead of vehicle products. There is an increase in the number of articles addressing the product carbon footprint (PCF) of hydrogen fuel cell vehicles in the recent years while relatively little research focuses on both vehicle PCF and fuel cycle. Zero-emission vehicles initiative has also brought the importance of investigating the emission throughout the fuel cycle of hydrogen fuel cell and its environmental impact. To address these gaps this study uses the life-cycle assessment (LCA) process of GREET (greenhouse gases regulated emissions and energy use in transportation) to compare the PCF of an EV (Tesla Model 3) and a hydrogen fuel cell car (Toyota MIRAI). According to the GREET results the fuel cycle contributes significantly to the PCF of both vehicles. The findings also reveal the need for greater transparency in the disclosure of relevant information on the PCF methodology adopted by vehicle manufacturers to enable comparison of their vehicles’ emissions. Future work will include examining the best practices of PCF reporting for vehicles powered by renewable energy sources as well as examining the carbon footprints of hydrogen production technologies based on different methodologies.
Future of Electric and Hydrogen Cars and Trucks: An Overview
Apr 2023
Publication
The negative consequences of toxic emissions from internal combustion engines energy security climate change and energy costs have led to a growing demand for clean power sources in the automotive industry. The development of eco-friendly vehicle technologies such as electric and hydrogen vehicles has increased. This article investigates whether hydrogen vehicles will replace electric vehicles in the future. The results showed that fuel-cell cars are unlikely to compete with electric cars. This is due to the advancements in electric vehicles and charging infrastructure which are becoming more cost-effective and efficient. Additionally the technical progress in battery electric vehicles (BEVs) is expected to reduce the market share of fuel-cell electric vehicles (FCEVs) in passenger vehicles. However significant investments have been made in hydrogen cars. Many ongoing investments seem to follow the sunk cost fallacy where decision-makers continue to invest in an unprofitable project due to their already invested resources. Furthermore even with megawatt charging fuel-cell trucks cost more than battery-powered electric trucks. The use cases for fuel-cell electric trucks are also much more limited as their running expenses are higher compared to electric cars. Hydrogen vehicles may be beneficial for heavy transport in remote areas. However it remains to be seen if niche markets are large enough to support fuel-cell electric truck commercialization and economies of scale. In summary we believe that hydrogen vehicles will not replace electric cars and trucks at least before 2050.
Cold Start Cycling Durability of Fuel Cell Stacks for Commercial Automotive Applications
Sep 2022
Publication
System durability is crucial for the successful commercialization of polymer electrolyte fuel cells (PEFCs) in fuel cell electric vehicles (FCEVs). Besides conventional electrochemical cycling durability during long-term operation the effect of operation in cold climates must also be considered. Ice formation during start up in sub-zero conditions may result in damage to the electrocatalyst layer and the polymer electrolyte membrane (PEM). Here we conduct accelerated cold start cycling tests on prototype fuel cell stacks intended for incorporation into commercial FCEVs. The effect of this on the stack performance is evaluated the resulting mechanical damage is investigated and degradation mechanisms are proposed. Overall only a small voltage drop is observed after the durability tests only minor damage occurs in the electrocatalyst layer and no increase in gas crossover is observed. This indicates that these prototype fuel cell stacks successfully meet the cold start durability targets for automotive applications in FCEVs.
On the Road to Sustainable Transport: Acceptance and Preferences for Renewable Fuel Production Infrastructure
Sep 2022
Publication
To abate climate change and ameliorate the air quality in urban areas innovative solutions are required to reduce CO2 and pollutant emissions from traffic. Alternative fuels made from biomass or CO2 and hydrogen can contribute to these goals by substituting fossil gasoline or diesel in combustion engines. Using a conjoint analysis approach the current study investigates preferences of laypeople (n = 303) for fuel production facilities in terms of siting location plant size raw material used in the production and raw material transport. The location was most decision-relevant followed by raw material transport whereas plant size and type of raw material played a less prominent role for the preference choice. The best-case scenario from the point of view of acceptance would be the installation of a rather small bio-hybrid fuel production plant in an industrial area (instead of an agricultural or pristine environment). No transport or transport via underground pipeline were preferred over truck/tank car or overground pipeline. The findings can be used as a basis for planning and decision-making for designing production networks for new fuel types.
Synthetic Fuels in the German Industry Sector Depending on Climate Protection Level
Aug 2021
Publication
Especially the electrification of the industry sector is highly complex and challenging mainly due to process-specific requirements. In this context there are several industrial processes where the direct and indirect use of electricity is subject to technical restrictions. In order to achieve the national climate goals the fossil energy consumption remaining after the implementation of efficiency and sufficiency measures as well as direct electrification has to be substituted through hydrogen and synthetic gaseous liquid and solid hydrocarbons. As the main research object the role of synthetic fuels in industrial transformation paths is investigated and analyzed by combining individual greenhouse gas abatement measures within the Sector Model Industry. Sector Model Industry is an energy consumption model that performs discrete deterministic energy and emission dynamic calculations with a time horizon up to 2050 at macroeconomic level. The results indicate that the use of synthetic fuels can be expected with a high level of climate protection. The industrial CO2 target in the model makes it necessary to replace CO2 -intensive fossil with renewable fuels. The model uses a total of 163 TWh of synthetic fuels in the climate protection scenario and thus achieves an 88% decrease in CO2 emissions in 2050 compared to 1990. This means that the GHG abatement achieved in industry is within the range of the targeted CO2 mitigation of the overall system in Germany of between 80 and 95% in 2050 compared to 1990. Due to technical restrictions the model mainly uses synthetic methane instead of hydrogen (134 TWh). The results show that despite high costs synthetic fuels are crucial for defossilization as a fall back option in the industrial scenario considering high climate ambition. The scenario does not include hydrogen technologies for heat supply. Accordingly the climate protection scenario uses hydrogen only in the steel industry for the direct reduction of iron (21 TWh). 8 TWh of synthetic oil substitute the same amount of fossil oil in the climate protection scenario. A further analysis conducted on the basis of the model results shows that transformation in the energy system and the use of smart ideas concepts and technologies are a basic prerequisite for enabling the holistic defossilisation of industry. The findings in the research can contribute to the cost-efficient use of synthetic fuels in industry and thus serve as a basis for political decision making. Moreover the results may have a practical relevance not only serving as a solid comparison base for the outcome of other studies but also as input data for further simulation of energy system transformation paths.
Coordinated Control of a Wind-Methanol-Fuel Cell System with Hydrogen Storage
Dec 2017
Publication
This paper presents a wind-methanol-fuel cell system with hydrogen storage. It can manage various energy flow to provide stable wind power supply produce constant methanol and reduce CO2 emissions. Firstly this study establishes the theoretical basis and formulation algorithms. And then computational experiments are developed with MATLAB/Simulink (R2016a MathWorks Natick MA USA). Real data are used to fit the developed models in the study. From the test results the developed system can generate maximum electricity whilst maintaining a stable production of methanol with the aid of a hybrid energy storage system (HESS). A sophisticated control scheme is also developed to coordinate these actions to achieve satisfactory system performance.
Thermoacoustic Combustion Stability Analysis of a Bluff Body-Stabilized Burner Fueled by Methane–Air and Hydrogen–Air Mixtures
Apr 2023
Publication
Hydrogen can play a key role in the gradual transition towards a full decarbonization of the combustion sector e.g. in power generation. Despite the advantages related to the use of this carbon-free fuel there are still several challenging technical issues that must be addressed such as the thermoacoustic instability triggered by hydrogen. Given that burners are usually designed to work with methane or other fossil fuels it is important to investigate their thermoacoustic behavior when fueled by hydrogen. In this framework the present work aims to propose a methodology which combines Computational Fluid Dynamics CFD (3D Reynolds-Averaged Navier-Stokes (RANS)) and Finite Element Method (FEM) approaches in order to investigate the fluid dynamic and the thermoacoustic behavior introduced by hydrogen in a burner (a lab-scale bluff body stabilized burner) designed to work with methane. The case of CH4 -air mixture was used for the validation against experimental results and benchmark CFD data available in the literature. Numerical results obtained from CFD simulations namely thermofluidodynamic properties and flame characteristics (i.e. time delay and heat release rate) are used to evaluate the effects of the fuel change on the Flame Response Function to the acoustic perturbation by means of a FEM approach. As results in the H2 -air mixture case the time delay decreases and heat release rate increases with respect to the CH4 -air mixture. A study on the Rayleigh index was carried out in order to analyze the influence of H2 -air mixture on thermoacoustic instability of the burner. Finally an analysis of both frequency and growth rate (GR) on the first four modes was carried out by comparing the two mixtures. In the H2 -air case the modes are prone to become more unstable with respect to the same modes of the case fueled by CH4 -air due to the change in flame topology and variation of the heat release rate and time delay fields.
Technological Pathways for Decarbonizing Petroleum Refining
Sep 2021
Publication
This paper discusses the technical specifications of how U.S. petroleum refineries can reduce facility emissions and shift to produce low-carbon fuels for hard to abate sectors by utilizing existing innovative technologies.
Fuel Cell Hybrid Model for Predicting Hydrogen Inflow through Energy Demand
Nov 2019
Publication
Hydrogen-based energy storage and generation is an increasingly used technology especially in renewable systems because they are non-polluting devices. Fuel cells are complex nonlinear systems so a good model is required to establish efficient control strategies. This paper presents a hybrid model to predict the variation of H2 flow of a hydrogen fuel cell. This model combining clusters’ techniques to get multiple Artificial Neural Networks models whose results are merged by Polynomial Regression algorithms to obtain a more accurate estimate. The model proposed in this article use the power generated by the fuel cell the hydrogen inlet flow and the desired power variation to predict the necessary variation of the hydrogen flow that allows the stack to reach the desired working point. The proposed algorithm has been tested on a real proton exchange membrane fuel cell and the results show a great precision of the model so that it can be very useful to improve the efficiency of the fuel cell system.
Performance and Weight Parameters Calculation for Hydrogen and Battery-Powered Aircraft Concepts
May 2023
Publication
This article describes the creation of a program that would be useful for calculating mathematical models in order to estimate the weight of aircraft components. Using several parameters it can calculate other parameters of civil transport aircraft powered by batteries or fuel cells. The main goals of this research were to add the missing dimensions and parameters to the aircraft database create a simple but effective program for creating mathematical models and use this program to find technological barriers to battery or hydrogen fuel-cell-powered aircraft concepts. The article introduces the reader to the problem of calculating OEW (operating empty weight) using Breguet– Leduc equations. A calculation model was created for OEW calculation. The result of this work is the verification of a mathematical model for battery-powered electric aircraft of the CS-23 (European Aviation Safety Agency Certification Specification for Normal Utility Aerobatic and Commuter Category Aeroplanes) category by comparing the program’s outputs with real aircraft. Subsequently the results of mathematical models are shown in graphs that specify the space of possible concepts of aircraft powered by batteries or fuel cells sorted by the number of passengers and the range of the aircraft delimited by two or three criteria respectively.
Alternative Sources of Energy in Transport: A Review
May 2023
Publication
Alternative sources of energy are on the rise primarily because of environmental concerns in addition to the depletion of fossil fuel reserves. Currently there are many alternatives approaches and attempts to introduce alternative energy sources in the field of transport. This article centers around the need to explore additional energy sources beyond the current ones in use. It delves into individual energy sources that can be utilized for transportation including their properties production methods and the advantages and disadvantages associated with their use across different types of drives. The article not only examines the situation in the Czech Republic but also in other nations. In addition to addressing future mobility the thesis also considers how the utilization of new energy sources may impact the environment.
Towards a Prioritization of Alternative Energy Sources for Sustainable Shipping
Apr 2023
Publication
Studies on the prospects of the use of alternative fuels in the maritime industry have rarely been assessed in the context of developing countries. This study assesses seven energy sources for shipping in the context of Bangladesh with a view to ranking their prospects based on sustainability as well as identifying the energy transition criteria. Data were collected from maritime industry experts including seafarers shipping company executives government representatives and academics. The Bayesian Best-Worst Method (BWM) was used for ranking nine criteria related to the suitability and viability of the considered alternative energy sources. Next the PROMETHEE-GAIA method is applied for priority analysis of the seven energy alternatives. The findings reveal that capital cost alternative energy price and safety are the most important factors for alternative energy transition in Bangladesh. Apart from the benchmark HFO Liquified Natural Gas (LNG) HFO-Wind and LNG-Wind hybrids are considered the most viable alternatives. The findings of the study can guide policymakers in Bangladesh in terms of promoting viable energy sources for sustainable shipping.
Environmental Life-Cycle Assessment of Eco-Friendly Alternative Ship Fuels (MGO, LNG, and Hydrogen) for 170 GT Nearshore Ferry
May 2022
Publication
With increasing concerns about environmental pollution the shipping industry has been considering various fuels as alternative power sources. This paper presents a study of the holistic environmental impacts of eco-friendly alternative ship fuels of marine gas oil (MGO) liquefied natural gas (LNG) and hydrogen across each of their life cycles from their production to the operation of the ship. The environmental impacts of the fuels were estimated by life-cycle assessment (LCA) analysis in the categories of well-to-tank tank-to-wake and well-to-wake phases. The LCA analysis was targeted for a 170 gross tonnage (GT) nearshore ferry operating in the ROK which was conceptually designed in the study to be equipped with the hydrogen fuel cell propulsion system. The environmental impact performance was presented with comparisons for the terms of global warming potential (GWP) acidification potential (AP) photochemical ozone creation potential (POCP) eutrophication potential (EP) and particulate matter (PM). The results showed that the hydrogen showed the highest GWP level during its life cycle due to the large amount of emissions in the hydrogen generation process through the steam methane reforming (SMR) method. The paper concludes with suggestions of an alternative fuel for the nearshore ferry and its production method based on the results of the study.
Greenhouse Gas Emissions Performance of Electric, Hydrogen and Fossil-Fuelled Freight Trucks with Uncertainty Estimates Using a Probabilistic Life-Cycle Assessment (pLCA)
Jan 2024
Publication
This research conducted a probabilistic life-cycle assessment (pLCA) into the greenhouse gas (GHG) emissions performance of nine combinations of truck size and powertrain technology for a recent past and a future (largely decarbonised) situation in Australia. This study finds that the relative and absolute life-cycle GHG emissions performance strongly depends on the vehicle class powertrain and year of assessment. Life-cycle emission factor distributions vary substantially in their magnitude range and shape. Diesel trucks had lower life-cycle GHG emissions in 2019 than electric trucks (battery hydrogen fuel cell) mainly due to the high carbon-emission intensity of the Australian electricity grid (mainly coal) and hydrogen production (mainly through steam–methane reforming). The picture is however very different for a more decarbonised situation where battery electric trucks in particular provide deep reductions (about 75–85%) in life-cycle GHG emissions. Fuel-cell electric (hydrogen) trucks also provide substantial reductions (about 50–70%) but not as deep as those for battery electric trucks. Moreover hydrogen trucks exhibit the largest uncertainty in emissions performance which reflects the uncertainty and general lack of information for this technology. They therefore carry an elevated risk of not achieving the expected emission reductions. Battery electric trucks show the smallest (absolute) uncertainty which suggests that these trucks are expected to deliver the deepest and most robust emission reductions. Operational emissions (on-road driving and vehicle maintenance combined) dominate life-cycle emissions for all vehicle classes. Vehicle manufacturing and upstream emissions make a relatively small contribution to life-cycle emissions from diesel trucks (
Emission Reduction and Cost-benefit Analysis of the Use of Ammonia and Green Hydrogen as Fuel for Marine Applications
Dec 2023
Publication
Increasingly stringent emission standards have led shippers and port operators to consider alternative energy sources which can reduce emissions while minimizing capital investment. It is essential to understand whether there is a certain economic investment gap for alternative energy. The present work mainly focuses on the simulation study of ships using ammonia and hydrogen fuels arriving at Guangzhou Port to investigate the emission advantages and cost-benefit analysis of ammonia and hydrogen as alternative fuels. By collecting actual data and fuel consumption emissions of ships arriving at Guangzhou Port the present study calculated the pollutant emissions and cost of ammonia and hydrogen fuels substitution. As expected it is shown that with the increase of NH3 in fuel mixed fuels will effectively reduce CO and CO2 emissions. Compared to conventional fuel the injection of NH3 increases the NOx emission. However the cost savings of ammonia fuel for CO2 SOx and PM10 reduction are higher than that for NOx. In terms of pollutants ammonia is less expensive than conventional fuels when applied to the Guangzhou Port. However the cost of fuel supply is still higher than conventional energy as ammonia has not yet formed a complete fuel supply and storage system for ships. On the other hand hydrogen is quite expensive to store and transport resulting in higher overall costs than ammonia and conventional fuels even if no pollutants are produced. At present conventional fuels still have advantage in terms of cost. With the promotion of ammonia fuel technology and application the cost of supply will be reduced. It is predicted that by 2035 ammonia will not only have emission reduction benefits but also will have a lower overall economic cost than conventional fuels. Hydrogen energy will need longer development and technological breakthroughs due to the limitation of storage conditions.
Evaluation of Hydrogen Addition on Combustion and Emission Characteristics of Dual-Fuel Diesel Engines with Different Compression Ratios
Sep 2023
Publication
In this paper a computational fluid dynamics (CFD) model was established and verified on the basis of experimental results and then the effect of hydrogenation addition on combustion and emission characteristics of a diesel–hydrogen dual-fuel engine fueled with hydrogenation addition (0% 5% and 10%) under different hydrogenation energy shares (HESs) and compression ratios (CRs) were investigated using CONVERGE3.0 software. And this work assumed that the hydrogen and air were premixed uniformly. The correctness of the simulation model was verified by experimental data. The values of HES are in the range of 0% 5% 10% and 15%. And the values of CR are in the range of 14 16 18 and 20. The results of this study showed that the addition of hydrogen to diesel fuel has a significant effect on the combustion characteristics and the emission characteristics of diesel engines. When the HES was 15% the in-cylinder pressure increased by 10.54%. The in-cylinder temperature increased by 15.11%. When the CR was 20 the in-cylinder pressure and the in-cylinder temperature increased by 66.10% and 13.09% respectively. In all cases HC CO CO2 and soot emissions decreased as the HES increased. But NOx emission increased.
Deploying Green Hydrogen to Decarbonize China's Coal Chemical Sector
Dec 2023
Publication
China’s coal chemical sector uses coal as both a fuel and feedstock and its increasing greenhouse gas (GHG) emissions are hard to abate by electrification alone. Here we explore the GHG mitigation potential and costs for onsite deployment of green H2 and O2 in China’s coal chemical sector using a lifecycle assessment and techno-economic analyses. We estimate that China’s coal chemical production resulted in GHG emissions of 1.1 gigaton CO2 equivalent (GtCO2eq) in 2020 equal to 9% of national emissions. We project GHG emissions from China’s coal chemical production in 2030 to be 1.3 GtCO2eq ~50% of which can be reduced by using solar or wind power-based electrolytic H2 and O2 to replace coal-based H2 and air separation-based O2 at a cost of 10 or 153 Chinese Yuan (CNY)/tCO2eq respectively. We suggest that provincial regions determine whether to use solar or wind power for water electrolysis based on lowest cost options which collectively reduce 53% of the 2030 baseline GHG emissions at a cost of 9 CNY/tCO2eq. Inner Mongolia Shaanxi Ningxia and Xinjiang collectively account for 52% of total GHG mitigation with net cost reductions. These regions are well suited for pilot policies to advance demonstration projects.
Industrial Development Status and Prospects of the Marine Fuel Cell: A Review
Jan 2023
Publication
In the context of the increasingly strict pollutant emission regulations and carbon emission reduction targets proposed by the International Maritime Organization the shipping industry is seeking new types of marine power plants with the advantages of high efficiency and low emissions. Among the possible alternatives the fuel cell is considered to be the most practical technology as it provides an efficient means to generate electricity with low pollutant emissions and carbon emissions. Very few comprehensive reviews focus on the maritime applications of the fuel cell. Thus news reports and literature on the maritime applications of the fuel cell in the past sixty years were collected and the industrial development status and prospects of the marine fuel cell were summarized as follows. Some countries in Europe North America and Asia have invested heavily in researching and developing the marine fuel cell and a series of research projects have achieved concrete results such as the industrialized marine fuel cell system or practical demonstration applications. At present the worldwide research of the marine fuel cell focuses more on the proton exchange membrane fuel cell (PEMFC). However the power demand of the marine fuel cell in the future will show steady growth and thus the solid oxide fuel cell (SOFC) with the advantages of higher power and fuel diversity will be the mainstream in the next research stage. Although some challenges exist the SOFC can certainly lead the upgrading and updating of the marine power system with the cooperative efforts of the whole world.
Economic Prospects of Taxis Powered by Hydrogen Fuel Cells in Palestine
Feb 2024
Publication
Recently major problems related to fuel consumption and greenhouse gas (GHG) emissions have arisen in the transportation sector. Therefore developing transportation modes powered by alternative fuels has become one of the main targets for car manufacturers and governments around the world. This study aimed to investigate the economic prospects of using hydrogen fuel cell technology in taxi fleets in Westbank. For this purpose a model that could predict the number of taxis was developed and the expected economic implications of using hydrogen fuel cell technology in taxi fleets were determined based on the expected future fuel consumption and future fuel cost. After analysis of the results it was concluded that a slight annual increase in the number of taxis in Palestine is expected in the future due to the government restrictions on issuing new taxi permits in order to get this sector organized. Furthermore using hydrogen fuel cells in taxi fleets is expected to become more and more feasible over time due to the expected future increase in oil price and the expected significant reduction in hydrogen cost as a result of the new technologies that are expected to be used in the production and handling of hydrogen.
Experimental Investigations of the Hydrogen Injectors on the Combustion Characteristics and Performance of a Hydrogen Internal Combustion Engine
Feb 2024
Publication
Hydrogen is regarded as an ideal zero-carbon fuel for an internal combustion engine. However the low mass flow rate of the hydrogen injector and the low volume heat value of the hydrogen strongly restrict the enhancement of the hydrogen engine performance. This experimental study compared the effects of single-injectors and double-injectors on the engine performance combustion pressure heat release rate and the coefficient of variation (CoVIMEP) based on a singlecylinder 0.5 L port fuel injection hydrogen engine. The results indicated that the number of hydrogen injectors significantly influences the engine performance. The maximum brake power is improved from 4.3 kW to 6.12 kW when adding the injector. The test demonstrates that the utilization of the double-injector leads to a reduction in hydrogen obstruction in the intake manifold consequently minimizing the pumping losses. The pump mean effective pressure decreased from −0.049 MPa in the single-injector condition to −0.029 MPa in the double-injector condition with the medium loads. Furthermore the double-injector exhibits excellent performance in reducing the coefficient of variation. The maximum CoVIMEP decreased from 2.18% in the single-injector configuration to 1.92% in the double-injector configuration. This result provides new insights for optimizing hydrogen engine injector design and optimizing the combustion process.
Challenges and Solutions of Hydrogen Fuel Cells in Transportation Systems: A Review and Prospects
Jun 2023
Publication
Conventional transportation systems are facing many challenges related to reducing fuel consumption noise and pollutants to satisfy rising environmental and economic criteria. These requirements have prompted many researchers and manufacturers in the transportation sector to look for cleaner more efficient and more sustainable alternatives. Powertrains based on fuel cell systems could partially or completely replace their conventional counterparts used in all modes of transport starting from small ones such as scooters to large mechanisms such as commercial airplanes. Since hydrogen fuel cells (HFCs) emit only water and heat as byproducts and have higher energy conversion efficiency in comparison with other conventional systems it has become tempting for many scholars to explore their potential for resolving the environmental and economic concerns associated with the transportation sector. This paper thoroughly reviews the principles and applications of fuel cell systems for the main transportation schemes including scooters bicycles motorcycles cars buses trains and aerial vehicles. The review showed that fuel cells would soon become the powertrain of choice for most modes of transportation. For commercial long-rage airplanes however employing fuel cells will be limited due to the replacement of the axillary power unit (APU) in the foreseeable future. Using fuel cells to propel such large airplanes would necessitate redesigning the airplane structure to accommodate the required hydrogen tanks which could take a bit more time.
Experimental Analysis of the Effects of Ship Motion on Hydrogen Dispersion in an Enclosed Area
Apr 2023
Publication
This study aims to experimentally quantify the hydrogen diffusion characteristics by ship motion. Hydrogen leakage experiments were conducted under various ship motion conditions and the corresponding hydrogen concentrations for each sensor were expressed by an equation. The experimental facility was a scale model of the hydrogen fuel storage room of a ship. An experiment was conducted by implementing the roll and pitch motions of the ship as well as motion direction using a ship simulator. In the equation describing the hydrogen concentration the minimum and maximum root mean square deviations were 0.987 and 0.707 respectively and the correlations were 0.000109 and 0.0012289. Although the results differed as per the sensor location the hydrogen concentration was affected by the motion period of the ship. The experimental results and prediction equations can be useful for sensor and vent location selection by predicting the concentration when hydrogen leaks in ships in motion.
Optimal Capacity Configuration of Wind–Solar Hydrogen Storage Microgrid Based on IDW-PSO
Aug 2023
Publication
Because the new energy is intermittent and uncertain it has an influence on the system’s output power stability. A hydrogen energy storage system is added to the system to create a wind light and hydrogen integrated energy system which increases the utilization rate of renewable energy while encouraging the consumption of renewable energy and lowering the rate of abandoning wind and light. Considering the system’s comprehensive operation cost economy power fluctuation and power shortage as the goal considering the relationship between power generation and load assigning charging and discharging commands to storage batteries and hydrogen energy storage and constructing a model for optimal capacity allocation of wind–hydrogen microgrid system. The optimal configuration model of the wind solar and hydrogen microgrid system capacity is constructed. A particle swarm optimization with dynamic adjustment of inertial weight (IDW-PSO) is proposed to solve the optimal allocation scheme of the model in order to achieve the optimal allocation of energy storage capacity in a wind–hydrogen storage microgrid. Finally a microgrid system in Beijing is taken as an example for simulation and solution and the results demonstrate that the proposed approach has the characteristics to optimize the economy and improve the capacity of renewable energy consumption realize the inhibition of the fluctuations of power reduce system power shortage and accelerate the convergence speed.
Caveats of Green Hydrogen for Decarbonisation of Heating in Buildings
Oct 2023
Publication
Hydrogen (H2) has rapidly become a topic of great attention when discussing routes to net-zero carbon emissions. About 14% of CO2 emissions globally are directly associated with domestic heating in buildings. Replacing natural gas (NG) with H2 for heating has been highlighted as a rapid alternative for mitigating these emissions. To realise this not only the production challenges but also potential obstacles in the transmission/distribution and combustion of H2 must be technically identified and discussed. This review in addition to delineating the challenges of H2 in NG grid pipelines and H2 combustion also collates the results of the state-of-the-art technologies in H2-based heating systems. We conclude that the sustainability of water and renewable electricity resources strongly depends on sizing siting service life of electrolysis plants and post-electrolysis water disposal plans. 100% H2 in pipelines requires major infrastructure upgrades including production transmission pressurereduction stations distribution and boiler rooms. H2 leakage instigates more environmental risks than economic ones. With optimised boilers burning H2 could reduce GHG emissions and obtain an appropriate heating efficiency; more data from boiler manufacturers must be provided. Overall green H2 is not the only solution to decarbonise heating in buildings and it should be pursued abreast of other heating technologies.
CO2 Emissions of Battery Electric Vehicles and Hydrogen Fuel Cell Vehicles
Jun 2023
Publication
During the last few years electric and hydrogen vehicles have become an alternative to cars that use internal combustion engines. The number of electric and hydrogen vehicles sold has increased due to support from local governments and because car manufacturers will stop the production of internal combustion engines in the near future. The emissions of these vehicles while being driven are zero but they still have an impact on the environment due to their fuel. In this article an analysis of carbon dioxide (CO2 ) emissions for two types of vehicles: battery electric vehicles (BEVs) powered by electricity and fuel cell electric vehicles (FCEVs) powered by hydrogen is presented. The analysis considers different values for the mix of power generation and hydrogen production options in comparison to other studies. The CO2 emissions were calculated and compared for the two types of vehicles. The results show that the CO2 emissions of BEVs are lower when compared to FCEVs if the hydrogen is obtained from pollutant sources and is higher if the hydrogen is obtained from nuclear power and renewable energy sources. When compared to conventional combustion engine vehicles BEVs have lower CO2 emissions while the emissions of FCEVs are dependent on the hydrogen production method.
Fuelling the Future: An In-depth Review of Recent Trends, Challenges and Opportunities of Hydrogen Fuel Cell for a Sustainable Hydrogen Economy
Sep 2023
Publication
Hydrogen has gained tremendous momentum worldwide as an energy carrier to transit to a net zero emission energy sector. It has been widely adopted as a promising large-scale renewable energy (RE) storage solution to overcome RE resources’ variability and intermittency nature. The fuel cell (FC) technology became in focus within the hydrogen energy landscape as a cost-effective pathway to utilize hydrogen for power generation. Therefore FC technologies’ research and development (R&D) expanded into many pathways such as cost reduction efficiency improvement fixed and mobile applications lifetime safety and regulations etc. Many publications and industrial reports about FC technologies and applications are available. This raised the necessity for a holistic review study to summarize the state-of-the-art range of FC stacks such as manufacturing the balance of plant types technologies applications and R&D opportunities. At the beginning the principal technologies to compare the well known types followed by the FC operating parameters are presented. Then the FC balance of the plant i.e. building components and materials with its functionality and purpose types and applications are critically reviewed with their limitations and improvement opportunities. Subsequently the electrical properties of FCs with their key features including advantages and disadvantages were investigated. Applications of FCs in different sectors are elaborated with their key characteristics current status and future R&D opportunities. Economic attributes of fuel cells with a pathway towards low cost are also presented. Finally this study identifies the research gaps and future avenues to guide researchers and the hydrogen industry.
Assessing the Potential of Decarbonization Options for Industrial Sectors
Jan 2024
Publication
Industry emits around a quarter of global greenhouse gas (GHG) emissions. This paper presents the first comprehensive review to identify the main decarbonization options for this sector and their abatement potentials. First we identify the important GHG emitting processes and establish a global average baseline for their current emissions intensity and energy use. We then quantify the energy and emissions reduction potential of the most significant abatement options as well as their technology readiness level (TRL). We find that energy-intensive industries have a range of decarbonization technologies available with medium to high TRLs and mature options also exist for decarbonizing low-temperature heat across a wide range of industrial sectors. However electrification and novel process change options to reduce emissions from high-temperature and sector-specific processes have much lower TRLs in comparison. We conclude by highlighting important barriers to the deployment of industrial decarbonization options and identifying future research development and demonstration needs.
Heat Integration of Liquid Hydrogen-Fueled Hybrid Electric Ship Propulsion System
Nov 2023
Publication
This study introduced the methodology for integrating ethylene glycol/water mixture (GW) systems which supply heat energy to the liquid hydrogen (LH2 ) fuel gas supply system (FGSS) and manage the temperature conditions of the battery system. All systems were designed and simulated based on the power demand of a 2 MW class platform supply vessel assumed as the target ship. The LH2 FGSS model is based on Aspen HYSYS V14 and the cell model that makes up the battery system is implemented based on a Thevenin model with four parameters. Through three different simulation cases the integrated GW system significantly reduced electric power consumption for the GW heater during ship operations achieving reductions of 1.38% (Case 1) 16.29% (Case 2) and 27.52% (Case 3). The energy-saving ratio showed decreases of 1.86% (Case 1) 21.01% (Case 2) and 33.80% (Case 3) in overall energy usage within the GW system. Furthermore an examination of the battery system’s thermal management in the integrated GW system demonstrated stable cell temperature control within ±3 K of the target temperature making this integration a viable solution for maintaining normal operating temperatures despite relatively higher fluctuations compared to an independent GW system.
Carbon-Free Heat Production for High-Temperature Heating Systems
Oct 2023
Publication
The article presents a new carbon-free heat production technology for district heating which consists of a combined heat and power generation fuel cell (FC CHP) with CO2 capture and a two-stage cascade high-temperature heat pump (TCHHP). The FC generates heat and electricity the latter being used to drive the compressors of the TCHHP. During the winter period the water temperature achieved can occasionally be too low so it would be heated up with hydrogen gas boilers. The hydrogen would be produced by reforming natural gas synthetic methane or biogas. The results are presented with natural gas utilization—the ratio between the obtained heat flow transferred directly to the water for district heating and the input heat flow of natural gas. In the case of a return water temperature of 60 ◦C and district heating temperature of 85 ◦C the TCHHP whose heat source is groundwater achieves plant efficiency of 270.04% in relation to the higher heating value (HHV) and 241.74% in relation to the lower heating value (LHV) of natural gas. A case with a TCHHP whose heat source is low-temperature geothermal water achieves a plant efficiency of 361.36% in relation to the HHV and 323.49% in relation to the LHV
No more items...