Applications & Pathways
Optimal Multi-layer Economical Schedule for Coordinated Multiple Mode Operation of Wind-solar Microgrids with Hybrid Energy Storage Systems
Nov 2023
Publication
The aim of this paper is the design and implementation of an advanced model predictive control (MPC) strategy for the management of a wind–solar microgrid (MG) both in the islanded and grid-connected modes. The MG includes energy storage systems (ESSs) and interacts with external hydrogen and electricity consumers as an extra feature. The system participates in two different electricity markets i.e. the daily and real-time markets characterized by different time-scales. Thus a high-layer control (HLC) and a low-layer control (LLC) are developed for the daily market and the real-time market respectively. The sporadic characteristics of renewable energy sources and the variations in load demand are also briefly discussed by proposing a controller based on the stochastic MPC approach. Numerical simulations with real wind and solar generation profiles and spot prices show that the proposed controller optimally manages the ESSs even when there is a deviation between the predicted scenario determined at the HLC and the real-time one managed by the LLC. Finally the strategy is tested on a lab-scale MG set up at Khalifa University Abu Dhabi UAE.
Multi-criteria Optimisation of Fermentative and Solar-driven Electrolytic Hydrogen and Electricity Supply-demand Network with Hybrid Storage System
May 2023
Publication
Harnessing renewable resources such as solar energy and biogenic waste for hydrogen production offers a path toward a carbon-neutral industrial economy. This study suggests the development of a renewable-based hydrogen and power supply facility (HPSF) that relies on fermentation and solar-driven electrolysis technologies to achieve penetration of renewable hydrogen and electricity in the industrial symbiosis. Literature studies reported that the hybrid battery-hydrogen storage system could effectively improve the sustainability and reliability of renewable energy supplies yet its application under diurnal and seasonal renewable resource variations has not been well studied. Hence this work develops a multi-criteria optimisation framework for the configuration design of the proposed HPSF that concurrently targets industrial hydrogen and electrical loads with the consideration of diurnal and seasonal renewable resource variations. Case scenarios with different storage applications are presented to evaluate the role of storage in improving economic and environmental sustainability. The results show that the application of hybrid storage with molten carbonate fuel cell (MCFC) systems is preferred from a comprehensive sustainability standpoint which improves the sustainability-weighted return-on investment metric (SWROIM) score by 4%/yr compared to HPSF without storage application. On the other hand the application of a single-battery system is the most economical solution with a return on investment (ROI) of 0.7%/yr higher than the hybrid storage approach. The research outcome could provide insights into the integration of fermentative and solar-driven electrolytic hydrogen production technologies into the industrial symbiosis to further enhance a sustainable economy.
Can an Energy Only Market Enable Resource Adequacy in a Decarbonized Power System? A Co-simulation with Two Agent-based-models
Feb 2024
Publication
Future power systems in which generation will come almost entirely from variable Renewable Energy Sources (vRES) will be characterized by weather-driven supply and flexible demand. In a simulation of the future Dutch power system we analyze whether there are sufficient incentives for market-driven investors to provide a sufficient level of security of supply considering the profit-seeking and myopic behavior of investors. We cosimulate two agent-based models (ABM) one for generation expansion and one for the operational time scale. The results suggest that in a system with a high share of vRES and flexibility prices will be set predominantly by the demand’s willingness to pay particularly by the opportunity cost of flexible hydrogen electrolyzers. The demand for electric heating could double the price of electricity in winter compared to summer and in years with low vRES could cause shortages. Simulations with stochastic weather profiles increase the year-to-year variability of cost recovery by more than threefold and the year-to-year price variability by more than tenfold compared to a scenario with no weather uncertainty. Dispatchable technologies have the most volatile annual returns due to high scarcity rents during years of low vRES production and diminished returns during years with high vRES production. We conclude that in a highly renewable EOM investors would not have sufficient incentives to ensure the reliability of the system. If they invested in such a way to ensure that demand could be met in a year with the lowest vRES yield they would not recover their fixed costs in the majority of years.
Top Level Design and Evaluation of Advanced Low/zero Carbon Fuel Ships Power Technology
Oct 2022
Publication
The greenhouse effect has always been a problem troubling various country many fields have made corresponding technological improvements and regulations and the shipping industry is no exception. In the shipping field governments are actively looking for viable low-carbon/zero-carbon alternative fuels to reduce their dependence on traditional fossil fuels. This paper discusses the challenges and opportunities of replacing fuel oil with clean energies. Firstly the alternative fuels that have been proposed frequently and widely in recent years are summarized and their sources adaptive power systems and relationships among fuels are systematically summarized. Secondly when evaluating the advantages and future development trends of each energy the environmental economic and safety factors are digitally quantified. Results show that the analysis focuses on the efficiency and economics of carbon reduction. Hydrogen ammonia and nuclear energy show advantages in environmental quantification factors while LNG biofuels and alcohols show benefits in economic quantification factors considering calorific value and fuel price and LNG and alcohols received high scores in safety assessment. Finally the study predicts the evolution and development trend of ship fuels in the future and evaluates the most suitable energy for ship development in different periods.
Configuration Optimization of Hydrogen-Based Multi-Microgrid Systems under Electricity Market Trading and Different Hydrogen Production Strategies
Apr 2023
Publication
Hydrogen-based multi-microgrid systems (HBMMSs) are beneficial for energy saving and emission reductions. However the optimal sizing of HBMMSs lacks a practical configuration optimization model and a reasonable solution method. To address these problems we designed a novel structure of HBMMSs that combines conventional energy renewable energy and a hydrogen energy subsystem. Then we established a bi-level multi-objective capacity optimization model while considering electricity market trading and different hydrogen production strategies. The objective of the inner model which is the minimum annual operation cost and the three objectives of the outer model which are the minimum total annual cost (TAC); the annual carbon emission (ACE); and the maximum self-sufficiency rate (SSR) are researched simultaneously. To solve the above optimization model a two-stage solution method which considers the conflicts between objectives and the objectivity of objective weights is proposed. Finally a case study is performed. The results show that when green hydrogen production strategies are adopted the three objectives of the best configuration optimization scheme are USD 404.987 million 1.106 million tons and 0.486 respectively.
Nuclear-Renewable Hybrid Energy System with Load Following for Fast Charging Stations
May 2023
Publication
The transportation sector is a significant source of greenhouse gas emissions. Electric vehicles (EVs) have gained popularity as a solution to reduce emissions but the high load of charging stations poses a challenge to the power grid. Nuclear-Renewable Hybrid Energy Systems (N-RHES) present a promising alternative to support fast charging stations reduce grid dependency and decrease emissions. However the intermittent problem of renewable energy sources (RESs) limits their application and the synergies among different technologies have not been fully exploited. This paper proposes a predictive and adaptive control strategy to optimize the energy management of N-RHES for fast charging stations considering the integration of nuclear photovoltaics and wind turbine energy with a hydrogen storage fuel cell system. The proposed dynamic model of a fast-charging station predicts electricity consumption behavior during charging processes generating probabilistic forecasting of electricity consumption time-series profiling. Key performance indicators and sensitivity analyses illustrate the practicability of the suggested system which offers a comprehensive solution to provide reliable sustainable and low-emission energy to fast-charging stations while reducing emissions and dependency on the power grid.
A Study on the Viability of Fuel Cells as an Alternative to Diesel Fuel Generators on Ships
Jul 2023
Publication
This study investigates methods for reducing air pollution in the shipping sector particularly in port areas. The study examines the use of fuel cells as an alternative to diesel generators. Environmental pollution at ports remains a critical issue so using fuel cells as an alternative to conventional energy systems warrants further research. This study compares commercial fuel cell types that can be used on a case study very large crude carrier (VLCC) vessel specifically although the technology is applicable to other vessels and requirements. Seven different fuel cell types were ranked based on five criteria to accomplish this. The proton-exchange membrane cell type was found to be the most suitable fuel cell type for the case study vessel. Based on the input fuel ammonia-based hydrogen storage has been identified as the most promising option along with using an ammonia reforming unit to produce pure hydrogen. Furthermore this study provides an integrated fuel cell module and highlights the economic environmental and maintenance aspects of implementing the proton-exchange membrane fuel cell module for this case study. It also calculates the required space as a crucial constraint of implementing fuel cell technology at sea.
Optimal Scheduling of Multi-microgrids with Power to Hydrogen Considering Federated Demand Response
Sep 2022
Publication
Hydrogen is regarded as a promising fuel in the transition to clean energy. Nevertheless as the demand for hydrogen increases some microgrids equipped with P2H (MGH) will encounter the issue of primary energy deficiency. Meanwhile some microgrids (MGs) face the difficulty of being unable to consume surplus energy locally. Hence we interconnect MGs with different energy characteristics and then establish a collaborative scheduling model of multi-microgrids (MMGs). In this model a federated demand response (FDR) program considering predictive mean voting is designed to coordinate controllable loads of electricity heat and hydrogen in different MGs. With the coordination of FDR the users’ satisfaction and comfort in each MG are kept within an acceptable range. To further adapt to an actual working condition of the microturbine (MT) in MGH a power interaction method is proposed to maintain the operating power of the MT at the optimum load level and shave peak and shorten the operating periods of MT. In the solution process the sequence operation theory is utilized to deal with the probability density of renewable energy. A series of case studies on a test system of MMG demonstrate the effectiveness of the proposed method.
Toward Sustainability: An Overview of the Use of Green Hydrogen in the Agriculture and Livestock Sector
Aug 2023
Publication
The agro-livestock sector produces about one third of global greenhouse gas (GHG) emissions. Since more energy is needed to meet the growing demand for food and the industrial revolution in agriculture renewable energy sources could improve access to energy resources and energy security reduce dependence on fossil fuels and reduce GHG emissions. Hydrogen production is a promising energy technology but its deployment in the global energy system is lagging. Here we analyzed the theoretical and practical application of green hydrogen generated by electrolysis of water powered by renewable energy sources in the agro-livestock sector. Green hydrogen is at an early stage of development in most applications and barriers to its large-scale deployment remain. Appropriate policies and financial incentives could make it a profitable technology for the future.
Net Hydrogen Consumption Minimization of Fuel Cell Hybrid Trains Using a Time-Based Co-Optimization Model
Apr 2022
Publication
With increasing concerns on transportation decarbonization fuel cell hybrid trains (FCHTs) attract many attentions due to their zero carbon emissions during operation. Since fuel cells alone cannot recover the regenerative braking energy (RBE) energy storage devices (ESDs) are commonly deployed for the recovery of RBE and provide extra traction power to improve the energy efficiency. This paper aims to minimize the net hydrogen consumption (NHC) by co-optimizing both train speed trajectory and onboard energy management using a time-based mixed integer linear programming (MILP) model. In the case with the constraints of speed limits and gradients the NHC of co-optimization reduces by 6.4% compared to the result obtained by the sequential optimization which optimizes train control strategies first and then the energy management. Additionally the relationship between NHC and employed ESD capacity is studied and it is found that with the increase of ESD capacity the NHC can be reduced by up to 30% in a typical route in urban railway transit. The study shows that ESDs play an important role for FCHTs in reducing NHC and the proposed time-based co-optimization model can maximize the energy-saving benefits for such emerging traction systems with hybrid energy sources including both fuel cells and ESD.
Solar Hydrogen for High Capacity, Dispatchable, Long-distance Energy transmission – A Case Study for Injection in the Greenstream Natural Gas Pipeline
Nov 2022
Publication
This paper presents the results of techno-economic modelling for hydrogen production from a photovoltaic battery electrolyser system (PBES) for injection into a natural gas transmission line. Mellitah in Libya connected to Gela in Italy by the Greenstream subsea gas transmission line is selected as the location for a case study. The PBES includes photovoltaic (PV) arrays battery electrolyser hydrogen compressor and large-scale hydrogen storage to maintain constant hydrogen volume fraction in the pipeline. Two PBES configurations with different large-scale storage methods are evaluated: PBESC with compressed hydrogen stored in buried pipes and PBESL with liquefied hydrogen stored in spherical tanks. Simulated hourly PV electricity generation is used to calculate the specific hourly capacity factor of a hypothetical PV array in Mellitah. This capacity factor is then used with different PV sizes for sizing the PBES. The levelised cost of delivered hydrogen (LCOHD) is used as the key techno-economic parameter to optimise the size of the PBES by equipment sizing. The costs of all equipment except the PV array and batteries are made to be a function of electrolyser size. The equipment sizes are deemed optimal if PBES meets hydrogen demand at the minimum LCOHD. The techno-economic performance of the PBES is evaluated for four scenarios of fixed and constant hydrogen volume fraction targets in the pipeline: 5% 10% 15% and 20%. The PBES can produce up to 106 kilotonnes of hydrogen per year to meet the 20% target at an LCOHD of 3.69 €/kg for compressed hydrogen storage (PBESC) and 2.81 €/kg for liquid hydrogen storage (PBESL). Storing liquid hydrogen at large-scale is significantly cheaper than gaseous hydrogen even with the inclusion of a significantly larger PV array that is required to supply additional electrcitiy for liquefaction.
Interdisciplinary Perspectives on Offshore Energy System Integration in the North Sea: A Systematic Literature Review
Oct 2023
Publication
To facilitate the rapid and large-scale developments of offshore wind energy scholars policymakers and infrastructure developers must start considering its integration into the larger onshore energy system. Such offshore system integration is defined as the coordinated approach to planning and operation of energy generation transport and storage in the offshore energy system across multiple energy carriers and sectors. This article conducts a systematic literature review to identify infrastructure components of offshore energy system integration (including alternative cable connections offshore energy storage and power-to-hydrogen applications) and barriers to their development. An interdisciplinary perspective is provided where current offshore developments require not only mature and economically feasible technologies but equally strong legal and governance frameworks. The findings demonstrate that current literature lacks a holistic perspective on the offshore energy system. To date techno-economic assessments solving challenges of specific infrastructure components prevail over an integrated approach. Nevertheless permitting issues gaps in legal frameworks strict safety and environmental regulations and spatial competition also emerge as important barriers. Overall this literature review emphasizes the necessity of aligning various disciplines to provide a fundamental approach for the development of an integrated offshore energy system. More specifically timely policy and legal developments are key to incentivize technical development and enable economic feasibility of novel components of offshore system integration. Accordingly to maximize real-world application and policy learning future research will benefit from an interdisciplinary perspective.
Selected Materials and Technologies for Electrical Energy Sector
Jun 2023
Publication
Ensuring the energy transition in order to decrease CO2 and volatile organic compounds emissions and improve the efficiency of energy processes requires the development of advanced materials and technologies for the electrical energy sector. The article reviews superconducting materials functional nanomaterials used in the power industry mainly due to their magnetic electrical optical and dielectric properties and the thin layers of amorphous carbon nitride which properties make them an important material from the point of view of environmental protection optoelectronic photovoltaic and energy storage. The superconductivity-based technologies material processing and thermal and nonthermal plasma generation have been reviewed as technologies that can be a solution to chosen problems in the electrical energy sector and environment. The study explains directly both—the basics and application potential of low and high-temperature superconductors as well as peculiarities of the related manufacturing technologies for Roebel cables 1G and 2G HTS tapes and superconductor coil systems. Among the superconducting materials particular attention was paid to the magnesium di-boride MgB2 and its potential applications in the power industry. The benefits of the use of carbon films with amorphous structures in electronics sensing technologies solar cells FETs and memory devices were discussed. The article provides the information about most interesting from the R&D point of view groups of materials for PV applications. It summarises the advantages and disadvantages of their use regarding commercial requirements such as efficiency lifetime light absorption impact on the environment costs of production and weather dependency. Silicon processing inkjet printing vacuum deposition and evaporation technologies that allow obtaining improved and strengthened materials for solar cell manufacturing are also described. In the case of the widely developed plasma generation field waste-to-hydrogen technology including both thermal and non-thermal plasma techniques has been discussed. The review aims to draw attention to the problems faced by the modern power industry and to encourage research in this area because many of these problems can only be solved within the framework of interdisciplinary and international cooperation.
Chemical Kinetic Analysis of High-Pressure Hydrogen Ignition and Combustion toward Green Aviation
Jan 2024
Publication
In the framework of the “Multidisciplinary Optimization and Regulations for Low-boom and Environmentally Sustainable Supersonic aviation” project pursued by a consortium of European government and academic institutions coordinated by Politecnico di Torino under the European Commission Horizon 2020 financial support the Italian Aerospace Research Centre is computationally investigating the high-pressure hydrogen/air kinetic combustion in the operative conditions typically encountered in supersonic aeronautic ramjet engines. This task is being carried out starting from the zero-dimensional and one-dimensional chemical kinetic assessment of the complex and strongly pressure-sensitive ignition behavior and flame propagation characteristics of hydrogen combustion through the validation against experimental shock tube and laminar flame speed measurements. The 0D results indicate that the kinetic mechanism by Politecnico di Milano and the scheme formulated by Kéromnès et al. provide the best matching with the experimental ignition delay time measurements carried out in high-pressure shock tube strongly argon-diluted reaction conditions. Otherwise the best behavior in terms of laminar flame propagation is achieved by the Mueller scheme while the other investigated kinetic mechanisms fail to predict the flame speeds at elevated pressures. This confirms the non-linear and intensive pressure-sensitive behavior of hydrogen combustion especially in the critical high-pressure and low-temperature region which is hard to be described by a single all-encompassing chemical model.
Routes for Hydrogen Introduction in the Industrial Hard-to-Abate Sectors for Promoting Energy Transition
Aug 2023
Publication
This paper offers a set of comprehensive guidelines aimed at facilitating the widespread adoption of hydrogen in the industrial hard-to-abate sectors. The authors begin by conducting a detailed analysis of these sectors providing an overview of their unique characteristics and challenges. This paper delves into specific elements related to hydrogen technologies shedding light on their potential applications and discussing feasible implementation strategies. By exploring the strengths and limitations of each technology this paper offers valuable insights into its suitability for specific applications. Finally through a specific analysis focused on the steel sector the authors provide in-depth information on the potential benefits and challenges associated with hydrogen adoption in this context. By emphasizing the steel sector as a focal point the authors contribute to a more nuanced understanding of hydrogen’s role in decarbonizing industrial processes and inspire further exploration of its applications in other challenging sectors.
Decarbonisation Options for the Cement Industry
Jan 2023
Publication
The cement industry is a building block of modern society and currently responsible for around 7% of global and 4% of EU CO2 emissions. While facing global competition and a challenging business environment the EU cement sector needs to decarbonise its production processes to comply with the EU’s ambitious 2030 and 2050 climate targets. This report provides a snapshot of the current cement production landscape and discusses future technologies that are being explored by the sector to decarbonise its processes describing the transformational change the industry faces. This report compiles the current projects and announcements to deploy breakthrough technologies which do require high capital investments. However with 2050 just one investment cycle away the sector needs to commercialise new low-CO2 technologies this decade to avoid the risk of stranded assets. As Portland cement production is highly CO2-intensive and EU plants are already operating close to optimum efficiency the industry appears to be focussing on carbon capture storage and utilisation technologies - while breakthroughs in alternative chemistries are still being explored - to reduce emissions. While the EU has played an important role in supporting early stage R&D for these technologies it is now striving to fill the funding gap for the commercialisation of breakthrough technologies. The recent momentum towards CO2-free cement provides the EU with the opportunity to be a frontrunner in creating markets for green cement.
A Review on Experimental Studies Investigating the Effect of Hydrogen Supplementation in CI Diesel Engines—The Case of HYMAR
Aug 2022
Publication
Hydrogen supplementation in diesel Compression Ignition (CI) engines is gaining more attention since it is considered as a feasible solution to tackle the challenges that are related to the emission regulations that will be applied in the forthcoming years. Such a solution is very attractive because it requires only limited modifications to the existing technology of internal combustion CI engines. To this end numerous work on the investigation of an engine’s performance and the effects of emissions when hydrogen is supplied in the engine’s cylinders has been completed by researchers. However contradictory results were found among these studies regarding the efficiency of the engine and the emission characteristics achieved compared to the diesel-only operation. The different conclusions might be attributed to the different characteristics and technology level of the engines that were utilized as well as on the chosen operational parameters. This paper aims to present an overview of the experimental studies that have examined the effects of hydrogen addition in CI four-stroke diesel engines reporting the characteristics of the utilized engines the quantities of hydrogen tested the method of hydrogen induction used as well as the operational conditions tested in order to help interested researchers to easily identify relevant and appropriate studies to perform comparisons or validations by repeating certain cases. The presented data do not include any results or conclusions from these studies. Furthermore an experimental configuration along with the appropriate modifications on a heavy-duty auxiliary generator-set engine that was recently developed by the authors for the purposes of the HYMAR project is presented.
Power Scheduling Optimization Method of Wind-Hydrogen Integrated Energy System Based on the Improved AUKF Algorithm test2
Nov 2022
Publication
With the proposal of China’s green energy strategy the research and development technologies of green energy such as wind energy and hydrogen energy are becoming more and more mature. However the phenomenon of wind abandonment and anti-peak shaving characteristics of wind turbines have a great impact on the utilization of wind energy. Therefore this study firstly builds a distributed wind-hydrogen hybrid energy system model then proposes the power dispatching optimization technology of a wind-hydrogen integrated energy system. On this basis a power allocation method based on the AUKF (adaptive unscented Kalman filter) algorithm is proposed. The experiment shows that the power allocation strategy based on the AUKF algorithm can effectively reduce the incidence of battery overcharge and overdischarge. Moreover it can effectively deal with rapid changes in wind speed. The wind hydrogen integrated energy system proposed in this study is one of the important topics of renewable clean energy technology innovation. Its grid-connected power is stable with good controllability and the DC bus is more secure and stable. Compared with previous studies the system developed in this study has effectively reduced the ratio of abandoned air and its performance is significantly better than the system with separate grid connected fans and single hydrogen energy storage. It is hoped that this research can provide some solutions for the research work on power dispatching optimization of energy systems.
Life Cycle Analysis of Hydrogen Powered Marine Vessels—Case Ship Comparison Study with Conventional Power System
Aug 2023
Publication
The latest International Maritime Organization strategies aim to reduce 70% of the CO2 emissions and 50% of the Greenhouse Gas (GHG) emissions from maritime activities by 2050 compared to 2008 levels. The EU has set up goals to reduce GHG emissions by at least 55% by 2030 compared to 1990 and achieve net-zero GHG emissions by 2050. The UK aims to achieve more than 68% GHG emission reduction by 2030 and net-zero GHG emissions by 2050. There are many solutions under development to tackle the challenge of meeting the latest decarbonization strategies from the IMO EU and UK among which are hydrogen powered marine vessels. This paper presents a life cycle analysis study for hydrogen fuelled vessels by evaluating their performance in terms of environmental friendliness and economic feasibility. The LCA study will consider the gas emissions and costs during the life stages of the ships including the construction operation maintenance and recycling phases of the selected vessels. The results of the comparisons with the conventional version of the ships (driven by diesel generators) demonstrate the benefits of using hydrogen for marine transportation: over 80% emission reduction and around 60% life cycle cost savings. A sensitivity analysis shows that the prices of fuels and carbon credits can affect the life cycle cost and recommendations for low H2 price and high carbon credit in the future are provided to attract the industry to adopt the new fuel.
Hydrogen Fuel Cell Integration and Testing in a Hybrid-electric Propulsion Rig
Jun 2023
Publication
On the road towards greener aviation hybrid-electric propulsion systems have emerged as a viable solution. In this paper a system based on hydrogen fuel cells is proposed and evaluated in a laboratory setting with its future integration in a propulsive system in mind and main focus on the ability to lessen the power demand on the opposing side of the bench. The setup consists in a parallel architecture with two power sources: a hydrogen fuel cell and a battery. First the performance of the fuel cell and its capability to provide power to one of the motors are analyzed. Then the entire parallel hybrid system is evaluated. Although the experimental setup was shown to be sub-optimal the results demonstrated the ability of this greener alternative to reduce power demand on the opposing side of the parallel configuration with a reduction of up to 40.3% in the highest load scenario and maximum power output on the fuel cell of 257.8 W. The stack performance was also concluded to be very dependent on the operating temperature.
The Impact of Sustainable Energy Technologies and Demand Response Programs on the Hub's Planning by the Practical Consideration of Tidal Turbines as a Novel Option
Apr 2023
Publication
This paper investigates a multi-objective optimal energy planning strategy for a hub incorporating renewable and non-renewable resources like PV tidal turbine fuel-cell CHP boiler micro-turbine reactor reformer electrolyzer and energy storage by utilizing the time of use program (TOU). In this strategy tidal turbine fuel-cell and reformer technologies are considered novel technologies that simultaneously reduce the proposed hub’s cost and pollution. The hub’s total cost and pollution are considered objective functions. To make the results more realistic characteristics of the tidal turbine are investigated by utilizing the manufactory’s company information. The problem is then modeled as real mixed integer programming (RMIP) and is solved in GAMS software using a CPLEX solver. Epsilon constraints method and fuzzy satisfying approach are used to select the optimal solution based on the proposed model. Finally a sensitivity analysis is performed to assess the effective parameters that affect the planning’s results. The results show that the overall pollution is reduced by about 9% by assuming the proposed planning and the total profit is increased by about 30%.
Thermodynamic Evaluation and Carbon Footprint Analysis of the Application of Hydrogen-Based Energy-Storage Systems in Residential Buildings
Sep 2016
Publication
This study represents a thermodynamic evaluation and carbon footprint analysis of the application of hydrogen based energy storage systems in residential buildings. In the system model buildings are equipped with photovoltaic (PV) modules and a hydrogen storage system to conserve excess PV electricity from times with high solar irradiation to times with low solar irradiation. Short-term storages enable a degree of self-sufficiency of approximately 60% for a single-family house (SFH) [multifamily house (MFH): 38%]. Emissions can be reduced by 40% (SFH) (MFH: 30%) compared to households without PV modules. These results are almost independent of the applied storage technology. For seasonal storage the degree of self-sufficiency ranges between 57 and 83% (SFH). The emission reductions highly depend on the storage technology as emissions caused by manufacturing the storage dominate the emission balance. Compressed gas or liquid organic hydrogen carriers are the best options enabling emission reductions of 40%.
Simulation and Control Strategy Study of the Hydrogen Supply System of a Fuel Cell Engine
Jun 2023
Publication
The hydrogen supply system is one of the important components of a hydrogen fuel cell engine and its performance has an important impact on the economy and power of the engine system. In this paper a hydrogen supply system based on cyclic mode is designed for a hydrogen fuel cell stack with a full load power of 150 kW and the corresponding hydrogen fuel cell engine simulation model is built and validated. The control strategy of the fuel cell hydrogen supply system is developed and its effect is verified through bench tests. The results show that the developed control strategy can keep the volume fraction of nitrogen below 6% the hydrogen excess ratio does not exceed 1.5 under medium and high operating conditions the anode pressure is relatively stable and the stack can operate efficiently and reliably.
The Role of Liquid Hydrogen in Integrated Energy Systems - A Case Study for Germany
May 2023
Publication
Hydrogen (H2) is expected to be a key building block in future greenhouse gas neutral energy systems. This study investigates the role of liquid hydrogen (LH2) in a national greenhouse gas-neutral energy supply system for Germany in 2045. The integrated energy system model suite ETHOS is extended by LH2 demand profiles in the sectors aviation mobility and chemical industry and means of LH2 transportation via inland vessel rail and truck. This case study demonstrates that the type of hydrogen demand (liquid or gaseous) can strongly affect the cost-optimal design of the future energy system. When LH2 demand is introduced to the energy system LH2 import transportation and production grow in importance. This decreases the need for gaseous hydrogen (GH2) pipelines and affects the location of H2 production plants. When identifying no-regret measures it must be considered that the largest H2 consumers are the ones with the highest readiness to use LH2.
Multi-Objective Robust Optimization of Integrated Energy System with Hydrogen Energy Storage
Feb 2024
Publication
A novel multi-objective robust optimization model of an integrated energy system with hydrogen storage (HIES) considering source–load uncertainty is proposed to promote the low-carbon economy operation of the integrated energy system of a park. Firstly the lowest total system cost and carbon emissions are selected as the multi-objective optimization functions. The Pareto front solution set of the objective function is applied by compromise planning and the optimal solution among them is obtained by the maximum–minimum fuzzy method. Furthermore the robust optimization (RO) approach is introduced to cope with the source–load uncertainty effectively. Finally it is demonstrated that the illustrated HIES can significantly reduce the total system cost carbon emissions and abandoned wind and solar power. Meanwhile the effectiveness of the proposed model and solution method is verified by analyzing the influence of multi-objective solutions and a robust coefficient on the Chongli Demonstration Project in Hebei Province.
Probabilistic Modelling of Seasonal Energy Demand Patterns in the Transition from Natural Gas to Hydrogen for an Urban Energy District
May 2023
Publication
The transition to a low-carbon energy system can be depicted as a “great reconfiguration” from a socio-technical perspective that carries the risk of impact shifts. Electrification with the objective of achieving rapidly deep decarbonisation must be accompanied by effective efficiency and flexibility measures. Hydrogen can be a preferred option in the decarbonisation process where electrification of end-uses is difficult or impractical as well as for long-term storage in energy infrastructure characterised by a large penetration of renewable energy sources. Notwithstanding the current uncertainties regarding costs environmental impact and the inherent difficulties of increasing rapidly supply capacity hydrogen can represent a solution to be used in multi-energy systems with combined heat and power (CHP) in particular in urban energy districts. In fact while achieving carbon savings with natural gas fuelled CHP is not possible when low grid carbon intensity factors are present it may still be possible to use it to provide flexibility services and to reduce emissions further with switch from natural gas to hydrogen. In this paper a commercially established urban district energy scheme located in Southampton (United Kingdom) is analysed with the goal of exploring potential variations in its energy demand. The study proposes the use of scalable data-driven methods and probabilistic simulation to generate seasonal energy demand patterns representing the potential short-term and long-term evolution of the energy district.
Green Hydrogen Based Power Generation Prospect for Sustainable Development of Bangladesh using PEMFC and Hydrogen Gas Turbine
Feb 2023
Publication
Bangladesh focuses on green energy sources to be a lesser dependent on imported fossil fuels and to reduce the GHG emission to decarbonize the energy sector. The integration of renewable energy technologies for green hydrogen production is promising for Bangladesh. Hybrid renewable plants at the coastline along the Bay of Bengal Kuakata Sandwip St. Martin Cox’sbazer and Chattogram for green hydrogen production is very promising to solve the power demand scarcity of Bangladesh. Hydrogen gas turbine and hydrogen fuel cell configured power plant performances are studied to observe the feasibility/prospect to the green energy transition. The Plant’s performances investigated based on specification of the plant’s units and verified by MATLAB SIMULINK software. Fuels blending (different percent of hydrogen with fossil fuel/NG) technique makes the hydrogen more feasible as turbine fuel. The net efficiency of the fuel cell-based combined cycle configuration (74%) is higher than that of the hydrogen gas turbine-based configuration (51.9%). Moreover analyses show that the increment of combined cycle gas turbine efficiency (+18.5%) is more than the combined cycle PEMFC configuration (+14%). Long-term storage of renewable energy in the salt cavern as green hydrogen can be a source of energy for emergency. A significant share of power can be generated by a numbers of green power plants at specified places in Bangladesh.
Low-carbon Planning for Park-level Integrated Energy System Considering Optimal Construction Time Sequence and Hydrogen Energy Facility
Apr 2023
Publication
With the increasing concern about global energy crisis and environmental pollution the integrated renewable energy system has gradually become one of the most important ways to achieve energy transition. In the context of the rapid development of hydrogen energy industry the proportion of hydrogen energy in the energy system has gradually increased. The conversion between various energy sources has also become more complicated which poses challenges to the planning and construction of park-level integrated energy systems (PIES). To solve this problem we propose a bi-level planning model for an integrated energy system with hydrogen energy considering multi-stage investment and carbon trading mechanism. First the mathematical models of each energy source and energy storage in the park are established respectively and the independent operation of the equipment is analyzed. Second considering the operation state of multi-energy coordination a bi-level planning optimization model is established. The upper level is the capacity configuration model considering the variable installation time of energy facilities while the lower level is the operation optimization model considering several typical daily operations. Third considering the coupling relationship between upper and lower models the bi-level model is transformed into a solvable single-level mixed integer linear programming (MILP) model by using Karush–Kuhn–Tucker (KKT) condition and big-M method. Finally the proposed model and solution methods are verified by comprehensive case studies. Simulation results show that the proposed model can reduce the operational cost and carbon emission of PIES in the planning horizon and provide insights for the multi-stage investment of PIES.
Options for Methane Fuel Processing in PEMFC System with Potential Maritime Applications
Nov 2022
Publication
Proton-exchange membrane fuel cells (PEMFCs) are low-temperature fuel cells that have excellent starting performance due to their low operating temperature can respond quickly to frequent load fluctuations and can be manufactured in small packages. Unlike existing studies that mainly used hydrogen as fuel for PEMFCs in this study methane is used as fuel for PEMFCs to investigate its performance and economy. Methane is a major component of natural gas which is more economically competitive than hydrogen. In this study methane gas is reformed by the steam reforming method and is applied to the following five gas post-treatment systems: (a) Case 1—water– gas shift only (WGS) (b) Case 2—partial oxidation reforming only (PROX) (c) Case 3—methanation only (d) Case 4—WGS + methanation (e) Case 5—WGS + PROX. In the evaluation the carbon monoxide concentration in the gas did not exceed 10 ppm and the methane component which has a very large greenhouse effect was not regenerated in the post-treated exhaust gas. As a result Case 5 (WGS and PROX) is the only case that satisfied both criteria. Therefore we propose Case 5 as an optimized post-treatment system for methane reforming gas in ship PEMFCs.
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Feb 2021
Publication
Ammonia a molecule that is gaining more interest as a fueling vector has been considered as a candidate to power transport produce energy and support heating applications for decades. However the particular characteristics of the molecule always made it a chemical with low if any benefit once compared to conventional fossil fuels. Still the current need to decarbonize our economy makes the search of new methods crucial to use chemicals such as ammonia that can be produced and employed without incurring in the emission of carbon oxides. Therefore current efforts in this field are leading scientists industries and governments to seriously invest efforts in the development of holistic solutions capable of making ammonia a viable fuel for the transition toward a clean future. On that basis this review has approached the subject gathering inputs from scientists actively working on the topic. The review starts from the importance of ammonia as an energy vector moving through all of the steps in the production distribution utilization safety legal considerations and economic aspects of the use of such a molecule to support the future energy mix. Fundamentals of combustion and practical cases for the recovery of energy of ammonia are also addressed thus providing a complete view of what potentially could become a vector of crucial importance to the mitigation of carbon emissions. Different from other works this review seeks to provide a holistic perspective of ammonia as a chemical that presents benefits and constraints for storing energy from sustainable sources. State-of-the-art knowledge provided by academics actively engaged with the topic at various fronts also enables a clear vision of the progress in each of the branches of ammonia as an energy carrier. Further the fundamental boundaries of the use of the molecule are expanded to real technical issues for all potential technologies capable of using it for energy purposes legal barriers that will be faced to achieve its deployment safety and environmental considerations that impose a critical aspect for acceptance and wellbeing and economic implications for the use of ammonia across all aspects approached for the production and implementation of this chemical as a fueling source. Herein this work sets the principles research practicalities and future views of a transition toward a future where ammonia will be a major energy player.
Analysis of the Combustion Process in a Hydrogen-Fueled CFR Engine
Mar 2023
Publication
Green hydrogen produced using renewable energy is nowadays one of the most promising alternatives to fossil fuels for reducing pollutant emissions and in turn global warming. In particular the use of hydrogen as fuel for internal combustion engines has been widely analyzed over the past few years. In this paper the authors show the results of some experimental tests performed on a hydrogen-fueled CFR (Cooperative Fuel Research) engine with particular reference to the combustion. Both the air/fuel (A/F) ratio and the engine compression ratio (CR) were varied in order to evaluate the influence of the two parameters on the combustion process. The combustion duration was divided in two parts: the flame front development (characterized by laminar flame speed) and the rapid combustion phase (characterized by turbulent flame speed). The results of the hydrogen-fueled engine have been compared with results obtained with gasoline in a reference operating condition. The increase in engine CR reduces the combustion duration whereas the opposite effect is observed with an increase in the A/F ratio. It is interesting to observe how the two parameters CR and A/F ratio have a different influence on the laminar and turbulent combustion phases. The influence of both A/F ratio and engine CR on heat transfer to the combustion chamber wall was also evaluated and compared with the gasoline operation. The heat transfer resulting from hydrogen combustion was found to be higher than the heat transfer resulting from gasoline combustion and this is probably due to the different quenching distance of the two fuels.
An Integrated Framework for Optimal Infrastructure Planning for Decarbonising Heating
Apr 2023
Publication
This paper presents the HEGIT (Heat Electricity and Gas Infrastructure and Technology) model for optimal infrastructure planning for decarbonising heating in buildings. HEGIT is an optimisation model based on Mixed Integer Linear Programming. The model co-optimises the integrated operation and capacity expansion planning of electricity and gas grids as well as heating technologies on the consumer side while maintaining the security of supply and subject to different environmental operational and system-wide constraints. The three main features of the HEGIT model are: • It incorporates an integrated unit commitment and capacity expansion problem for coordinated operation and long-term investment planning of the electricity and gas grids. • It incorporates the flexible operation of heating technologies in buildings and demand response in operation and long-term investment planning of gas and electricity grids. • It incorporates a multi-scale techno-economic representation of heating technologies design features into the whole energy system modelling and capacity planning. These features enable the model to quantify the impacts of different policies regarding decarbonising heating in buildings on the operation and long-term planning of electricity and gas grids identify the cost-optimal use of available resources and technologies and identify strategies for maximising synergies between system planning goals and minimising trade-offs. Moreover the multi-scale feature of the model allows for multi-scale system engineering analysis of decarbonising heating including system-informed heating technology design identifying optimal operational setups at the consumer end and assessing trade-offs between consumer investment in heating technologies and infrastructure requirements in different heat decarbonisation pathways.
The Role of Hydrogen-based Power Systems in the Energy Transition of the Residential Sector
Sep 2021
Publication
The unsustainable and continuous growth of anthropogenic emissions of greenhouse gases (GHG) has pushed governments private companies and stakeholders to adopt measures and policies to fight against climate change. Within this framework increasing the contribution of renewable energy sources (RES) to final consumed energy plays a key role in the planned energy transition. Regarding the residential sector in Europe 92% of GHG emissions comes from 75% of the building stock that is over 25 years old and highly inefficient. Thus this sector must raise RES penetration from the current 36% to 77% by 2050 to comply with emissions targets. In this regard the hybridization of hydrogen-based technologies and RES represents a reliable and versatile solution to facilitate decarbonization of the residential sector. This study provides an overview and analysis of standalone renewable hydrogen-based systems (RHS) focusing on the residential and buildings sector as well as critical infrastructures like telecom stations data servers etc. For detailed evaluation of RHS several pilot plants and real demonstration plants implemented worldwide are reviewed. To this end a techno-economic assessment of relevant parameters like self-sufficiency ratio levelized cost of energy and hydrogen roundtrip efficiency is provided. Moreover the performance of the different configurations is evaluated by comparing the installed power of each component and their energy contribution to cover the load over a defined period of time. Challenges ahead are identified for the wider deployment of RHS in the residential and buildings sector.
A Review of the Optimization Strategies and Methods Used to Locate Hydrogen Fuel Refueling Stations
Feb 2023
Publication
Increasing sales of conventional fuel-based vehicles are leading to an increase in carbon emissions which are dangerous to the environment. To reduce these conventional fuel-based vehicles must be replaced with alternative fuel vehicles such as hydrogen-fueled. Hydrogen can fuel vehicles with near-zero greenhouse gas emissions. However to increase the penetration of such alternative fuel vehicles there needs to be adequate infrastructure specifically refueling infrastructure in place. This paper presents a comprehensive review of the different optimization strategies and methods used in the location of hydrogen refueling stations. The findings of the review in this paper show that there are various methods which can be used to optimally locate refueling stations the most popular being the p-median and flow-capture location models. It is also evident from the review that there are limited studies that consider location strategies of hydrogen refueling stations within a rural setting; most studies are focused on urban locations due to the high probability of penetration into these areas. Furthermore it is apparent that there is still a need to incorporate factors such as the safety elements of hydrogen refueling station construction and for risk assessments to provide more robust realistic solutions for the optimal location of hydrogen refueling stations. Hence the methods reviewed in this paper can be used and expanded upon to create useful and accurate models for a hydrogen refueling network. Furthermore this paper will assist future studies to achieve an understanding of the extant studies on hydrogen refueling station and their optimal location strategies.
Wind Farm Control for Improved Battery Lifetime in Green Hydrogen Systems without a Grid Connection
Jul 2023
Publication
Green hydrogen is likely to play an important role in meeting the net-zero targets of countries around the globe. One potential option for green hydrogen production is to run electrolysers directly from offshore wind turbines with no grid connection and hence no expensive cabling to shore. In this work an innovative proof of concept of a wind farm control methodology designed to reduce variability in wind farm active power output is presented. Smoothing the power supplied by the wind farm to the battery reduces the size and number of battery charge cycles and helps to increase battery lifetime. This work quantifies the impact of the wind farm control method on battery lifetime for wind farms of 1 4 9 and 16 wind turbines using suitable wind farm battery and electrolyser models. The work presented shows that wind farm control for smoothing wind farm power output could play a critical role in reducing the levelised cost of green hydrogen produced from wind farms with no grid connection by reducing the damaging load cycles on batteries in the system. Hence this work paves the way for the design and testing of a full implementation of the wind farm controller.
Low Carbon Optimal Operation of Integrated Energy System Based on Concentrating Solar Power Plant and Power to Hydrogen
Mar 2023
Publication
A new integrated energy system (IES) framework is created in order to encourage the consumption of renewable energy which is represented by wind and solar energy and lower carbon emissions. The connection between the units in the composite system is examined in this research. In-depth analysis is done on how energy is transferred between electricity heat gas and hydrogen. The system model and constraints are used to build an objective function with the lowest total operating cost. The calculation of carbon trading includes the ladder carbon trading method. And set up 6 cases for analysis which verifies the effectiveness of the participation of the concentrated solar power plant (CSPP) in the heat supply and power to hydrogen system (P2HS) in reducing the total operating cost of the system reducing wind curtailment and light curtailment and reducing carbon emissions. Under the model considered in this paper reduces the total operating cost reduces by 27.04% when the concentrated solar power plant is involved in the supply of thermal load. And the carbon emission is reduced by 14.529%. Compared with the traditional power to gas considers the power to hydrogen system in this paper which reduces the total operating cost by 4.79%.
Navigating Turbulence: Hydrogen's Role in the Decarbonization of the Aviation Sector
Jan 2024
Publication
This paper offers a comprehensive analysis of the historical evolution and the current state of the aviation industry with a particular emphasis on the critical need for this sector to decarbonize. It delves into emerging propulsion technologies such as battery electric and hydrogen-based systems assessing their potential impact on sustainability within the aviation sector. Special attention is devoted to the global regulatory framework notably carbon offsetting and emission reduction scheme for international aviation which encapsulates initiatives such as lower carbon aviation fuels and sustainable aviation fuels. Examining the environmental challenges facing aviation the paper underscores the necessity for a balanced and comprehensive strategy that integrates various approaches to achieve sustainable solutions. By addressing both the historical context and contemporary advances the paper aims to provide a nuanced understanding of the complexities surrounding aviation's decarbonization journey acknowledging the industry's strides while recognizing the ongoing challenges in the pursuit of sustainability.
Co-Combustion of Hydrogen with Diesel and Biodiesel (RME) in a Dual-Fuel Compression-Ignition Engine
Jun 2023
Publication
The utilization of hydrogen for reciprocating internal combustion engines remains a subject that necessitates thorough research and careful analysis. This paper presents a study on the co-combustion of hydrogen with diesel fuel and biodiesel (RME) in a compression-ignition piston engine operating at maximum load with a hydrogen content of up to 34%. The research employed engine indication and exhaust emissions measurement to assess the engine’s performance. Engine indication allowed for the determination of key combustion stages including ignition delay combustion time and the angle of 50% heat release. Furthermore important operational parameters such as indicated pressure thermal efficiency and specific energy consumption were determined. The evaluation of dual-fuel engine stability was conducted by analyzing variations in the coefficient of variation in indicated mean effective pressure. The increase in the proportion of hydrogen co-combusted with diesel fuel and biodiesel had a negligible impact on ignition delay and led to a reduction in combustion time. This effect was more pronounced when using biodiesel (RME). In terms of energy efficiency a 12% hydrogen content resulted in the highest efficiency for the dual-fuel engine. However greater efficiency gains were observed when the engine was powered by RME. It should be noted that the hydrogen-powered engine using RME exhibited slightly less stable operation as measured by the COVIMEP value. Regarding emissions hydrogen as a fuel in compression ignition engines demonstrated favorable outcomes for CO CO2 and soot emissions while NO and HC emissions increased.
Optimal Operation Strategy of PV-Charging-Hydrogenation Composite Energy Station Considering Demand Response
Apr 2023
Publication
Traditional charging stations have a single function which usually does not consider the construction of energy storage facilities and it is difficult to promote the consumption of new energy. With the gradual increase in the number of new energy vehicles (NEVs) to give full play to the complementary advantages of source-load resources and provide safe efficient and economical energy supply services this paper proposes the optimal operation strategy of a PV-charging-hydrogenation composite energy station (CES) that considers demand response (DR). Firstly the operation mode of the CES is analyzed and the CES model including a photovoltaic power generation system fuel cell hydrogen production hydrogen storage hydrogenation and charging is established. The purpose is to provide energy supply services for electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs) at the same time. Secondly according to the travel law of EVs and HFCVs the distribution of charging demand and hydrogenation demand at different periods of the day is simulated by the Monte Carlo method. On this basis the following two demand response models are established: charging load demand response based on the price elasticity matrix and interruptible load demand response based on incentives. Finally a multi-objective optimal operation model considering DR is proposed to minimize the comprehensive operating cost and load fluctuation of CES and the maximum–minimum method and analytic hierarchy process (AHP) are used to transform this into a linearly weighted single-objective function which is solved via an improved moth–flame optimization algorithm (IMFO). Through the simulation examples operation results in four different scenarios are obtained. Compared with a situation not considering DR the operation strategy proposed in this paper can reduce the comprehensive operation cost of CES by CNY 1051.5 and reduce the load fluctuation by 17.8% which verifies the effectiveness of the proposed model. In addition the impact of solar radiation and energy recharge demand changes on operations was also studied and the resulting data show that CES operations were more sensitive to energy recharge demand changes.
Numerical Study on a Diesel/Dissociated Methanol Gas Compression Ignition Engine with Exhaust Gas Recirculation
Aug 2023
Publication
Bo Li,
Yihua Chen,
Fei Zhong and
Xu Hao
Hydrogen is the most promising alternative fuel in the field of engines. Exhaust heat assisted methanol dissociation is an attractive approach for generating hydrogen. In this work simulations are conducted on a compression ignition engine fueled with different proportions of diesel-dissociated methanol gas (DMG) blends at intermediate engine speed full load and 0% EGR ratio. The results reveal that the indicated thermal efficiency and indicated mean effective pressure are greatly enhanced combustion efficiency is increased and regular emissions of CO HC and soot are reduced while NOx emissions are reduced with increased DMG substitution. In addition a simulation is conducted at an intermediate engine speed full load 15% DMG substitution ratio and varying EGR ratios of 0–20%. The results indicate that the dual-fuel engine outperforms the original engine with respect to power fuel economy and regular emissions once an optimal EGR rate is adopted.
Enhancing Energy Transition through Sector Coupling: A Review of Technologies and Models
Jul 2023
Publication
In order to effectively combat the effects of global warming all sectors must actively reduce greenhouse gas emissions in a sustainable and substantial manner. Sector coupling has emerged as a critical technology that can integrate energy systems and address the temporal imbalances created by intermittent renewable energy sources. Despite its potential current sector coupling capabilities remain underutilized and energy modeling approaches face challenges in understanding the intricacies of sector coupling and in selecting appropriate modeling tools. This paper presents a comprehensive review of sector coupling technologies and their role in the energy transition with a specific focus on the integration of electricity heat/cooling and transportation as well as the importance of hydrogen in sector coupling. Additionally we conducted an analysis of 27 sector coupling models based on renewable energy sources with the goal of aiding deciders in identifying the most appropriate model for their specific modeling needs. Finally the paper highlights the importance of sector coupling in achieving climate protection goals while emphasizing the need for technological openness and market-driven conditions to ensure economically efficient implementation.
Hydrogen-powered Refrigeration System for Environmentally Friendly Transport and Delivery in the Food Supply Chain
Mar 2023
Publication
Urban population and the trend towards online commerce leads to an increase in delivery solution in cities. The growth of the transport sector is very harmful to the environment being responsible for approximately 40% of greenhouse gas emissions in the European Union. The problem is aggravated when transporting perishable foodstuffs as the vehicle propulsion engine (VPE) must power not only the vehicle but also the refrigeration unit. This means that the VPE must be running continuously both on the road and stationary (during delivery) as the cold chain must be preserved. The result is costly (high fuel consumption) and harmful to the environment. At present refrigerated transport does not support full-electric solutions due to the high energy consumption required which motivates the work presented in this article. It presents a turnkey solution of a hydrogen-powered refrigeration system (HPRS) to be integrated into standard light trucks and vans for short-distance food transport and delivery. The proposed solution combines an air-cooled polymer electrolyte membrane fuel cell (PEMFC) a lithium-ion battery and low-weight pressurised hydrogen cylinders to minimise cost and increase autonomy and energy density. In addition for its implementation and integration all the acquisition power and control electronics necessary for its correct management have been developed. Similarly an energy management system (EMS) has been developed to ensure continuity and safety in the operation of the electrical system during the working day while maximizing both the available output power and lifetime of the PEMFC. Experimental results on a real refrigerated light truck provide more than 4 h of autonomy in intensive intercity driving profiles which can be increased if necessary by simply increasing the pressure of the stored hydrogen from the current 200 bar to whatever is required. The correct operation of the entire HPRS has been experimentally validated in terms of functionality autonomy and safety; with fuel savings of more than 10% and more than 3650 kg of CO2/ year avoided.
Hydrogen-Electric Coupling Coordinated Control Strategy of Multi-Station Integrated System Based on the Honeycomb Topology
Mar 2022
Publication
With the high-proportion accession of renewable energy and randomness of the load side in the new energy power system unbalanced feeder power and heavy overload of the transformer caused by massive access of highly uncertain source loads become more and more serious. In order to solve the aforementioned problems a honeycomb topology of the multi-station integrated system is proposed. The soft open point (SOP) is used as the key integrated equipment of the internal unit of a multi-station integrated system. The honeycomb grid structure is composed of flexible nodes and the multi-station integrated system is composed of multi-network flexible interconnection. Based on the characteristics of the regional resource endowment hydrogen energy flow is deeply coupled in parts of honeycomb grids. In order to improve the reliability and flexibility of the multi-station integrated unit the structure of the new multi-station integrated unit the power balance constraints on the unit and the switching process of SOP control mode are studied. At the same time the hydrogen electricity coupling structure and the coordinated control strategy of hydrogen electricity conversion are proposed to solve the problem of deep application of hydrogen energy. Finally the effectiveness of the proposed multi-station integrated system is verified by using three simulation models.
Progress and Prospect of the Novel Integrated SOFC-ICE Hybrid Power System: System Design, Mass and Heat Integration, System Optimization and Techno-economic Analysis
Jan 2023
Publication
This paper presents a review of system design and analysis control strategy optimization and heat and mass integration of integrated solid oxide fuel cell (SOFC) and reciprocating internal combustion engine (ICE) system. Facing the future power-fuel-power path both SOFC and ICE can adapt to a variety of fuels which is one evidence that ICE is amenable to integration with SOFC while SOFC is more efficient cleaner and quieter than ICE. Different system topologies are classified whose dynamic performances are also analyzed. In addition the heat and mass integration of system is discussed. Moreover the combustion modes of ICE which can be applied to steady combustion high efficiency and low emissions are analyzed and compared. Meanwhile the potential and methods of system waste heat recovery are discussed. The exergy analysis energy density and techno-economy are discussed. Finally the results are discussed in the last section with the final conclusion that SOFC-ICE systems are very suitable for long-distance transportation such as maritime and aviation which can also solve problems of the carbon and pollutant emissions with the background of engine cannot be replaced in maritime while the system can adapt a variety of alternative fuels.
Low-carbon Economic Dispatch of Power Systems Based on Mobile Hydrogen Storage
Mar 2022
Publication
To alleviate the global warming crisis carbon reduction is an inevitable trend of sustainable development. The energy carrier with Hydrogen (H2) is considered to be one of the promising choices for realizing a low-carbon economy. With the increasing penetration level of wind power generation and for well-balancing wind generation fluctuations this paper proposes a low-carbon economic dispatch method for power systems based on mobile hydrogen storage(MHS). The wind power surplus during off-peak load periods is first utilized to generate green H2. Afterward the green H2 is optimally transported to multiple hydrogen storage(HS) stations for generating power electricity by flexibly controlling the electrolysis(EL) methanation(ME) carbon capture(CCS) and H2 power generation processes in such a way the wind power is coordinated with the hydrogen production transport and utilization to reduce the total carbon emission and minimize the operation cost of power systems. Finally the proposed power system low-carbon economic dispatch model is verified by case studies.
Thermodynamic Analysis of Methanol, Ammonia, and Hydrogen as Alternative Fuels in HCCI Engines
May 2023
Publication
The present study enters in the context of reducing harmful emissions of the marine fleet by using three of the most promising alternative fuels namely methanol ammonia and hydrogen. These fuels are to be examined from the perspective of both the first and second laws of thermodynamics when employed in turbocharged and intercooled Homogeneous Charge Compression Ignition Engines (HCCI) under various values of ambient temperature and equivalence ratio. Results showed that the highest engine performance values favour using ammonia as fuel followed in order by hydrogen and methanol. Furthermore most of the exergy destruction rates (65.26% ammonia to 84.02% for hydrogen) of the exergy destruction rate occurring in the engine take place in the HCCI engine.
A Review on Biohydrogen Sources, Production Routes, and Its Application as a Fuel Cell
Aug 2023
Publication
More than 80% of the energy from fossil fuels is utilized in homes and industries. Increased use of fossil fuels not only depletes them but also contributes to global warming. By 2050 the usage of fossil fuels will be approximately lower than 80% than it is today. There is no yearly variation in the amount of CO2 in the atmosphere due to soil and land plants. Therefore an alternative source of energy is required to overcome these problems. Biohydrogen is considered to be a renewable source of energy which is useful for electricity generation rather than relying on harmful fossil fuels. Hydrogen can be produced from a variety of sources and technologies and has numerous applications including electricity generation being a clean energy carrier and as an alternative fuel. In this review a detailed elaboration about different kinds of sources involved in biohydrogen production various biohydrogen production routes and their applications in electricity generation is provided.
Assessment of Hydrogen Gas Turbine-fuel Cell Powerplant for Rotorcraft
Jul 2023
Publication
Conventional turboshaft engines are high power density movers suffering from low efficiency at part power operation and producing significant emissions. This paper presents a design exploration and feasibility assessment of a hybrid hydrogen-fueled powerplant for Urban Air Mobility (UAM) rotorcraft. A multi-disciplinary approach is devised comprising models for rotorcraft performance tank and subsystems sizing and engine performance. The respective trade-offs between payload-range and mission level performance are quantified for kerosene-fueled and hybrid hydrogen tilt-rotor variants. The effects of gas turbine scaling and fuel cell pressurization are evaluated for different hybridization degrees. Gas turbine scaling with hybridization (towards the fuel cell) results in up to 21% benefit in energy consumption relative to the non-scaled case with the benefits being more pronounced at high hybridization degrees. Pressurizing the fuel cell has shown significant potential as cell efficiency can increase up to 10% when pressurized to 6 bar which translates to a 6% increase in overall efficiency. The results indicate that current fuel cells (1 kW/kg) combined with current hydrogen tank technology severely limit the payload range capability of the tilt-rotor. However for advanced fuel cell technology (2.5 kW/kg) and low ranges hybrid powerplant show the potential to reduce energy consumption and reduce emissions footprint.
Advantages and Technological Progress of Hydrogen Fuel Cell Vehicles
Jun 2023
Publication
The automotive industry is undergoing a profound transformation driven by the need for sustainable and environmentally friendly transportation solutions [1]. In this context fuel cell technology has emerged as a promising alternative offering clean efficient and high-performance power sources for vehicles [2]. Fuel cell vehicles are electric vehicles that use fuel cell systems as a single power source or as a hybrid power source in combination with rechargeable energy storage systems. A typical fuel cell system for electric vehicle is exhibited in Figure 1 which provides a comprehensive demonstration of this kind of complex system. Hydrogen energy is a crucial field in the new energy revolution and will become a key pillar in building a green efficient and secure new energy system. As a critical field for hydrogen utilization fuel cell vehicles will play an important role in the transformation and development of the automotive industry. The development of fuel cell vehicles offers numerous advantages such as strong power outputs safety reliability and economic energy savings [3]. However improvements must urgently be made in existing technologies such as fuel cell stacks (including proton exchange membranes catalysts gas diffusion layers and bipolar plates) compressors and onboard hydrogen storage systems [4]. The advantages and current technological status are analyzed here.
Comprehensive Techno-economic Assessment of Power Technologies and Synthetic Fuels under Discussion for Ship Applications
Jun 2023
Publication
The decarbonization of the global ship traffic is one of the industry’s greatest challenges for the next decades and will likely only be achieved with the introduction of synthetic fuels. Until now however not one single best technology solution emerged to ideally fit this task. Instead different energy carriers including hydrogen ammonia methanol methane and synthetic diesel are subject of discussion for usage in either internal combustion engines or fuel cells. In order to drive the selection procedure a case study for the year 2030 with all eligible combinations of power technologies and fuels is conducted. The assessment quantifies the technologies’ economic performances for cost-optimized system designs and in dependence of a ship’s mission characteristics. Thereby the influence of trends for electrofuel prices and shipboard volume opportunity costs are examined. Even if gaseous hydrogen is often considered not suitable for large ship applications due to its low volumetric energy density both the comparatively small fuel price and the high efficiency of fuel cells lead to the overall smallest system costs for passages up to 21 days depending on assumed cost parameters. Only for missions longer than seven days fuel cells operating on methanol or ammonia can compete with gaseous hydrogen economically.
Feasibility of Hydrogen Fuel Cell Technology for Railway Intercity Services: A Case Study for the Piedmont in North Carolina
Jul 2021
Publication
Diesel fuel combustion results in exhaust containing air pollutants and greenhouse gas emissions. Many railway vehicles use diesel fuel as their energy source. Exhaust emissions as well as concerns about economical alternative power supply have driven efforts to move to hydrogen motive power. Hydrogen fuel cell technology applied to railways offers the opportunity to eliminate harmful exhaust emissions and the potential for a low- or zero-emission energy supply chain. Currently only multiple-unit trains with hydrail technology operate commercially. Development of an Integrated Hybrid Train Simulator for intercity railway is presented. The proposed tool incorporates the effect of powertrain components during the wheel-to-tank process. Compared to its predecessors the proposed reconfigurable tool provides high fidelity with medium requirements and minimum computation time. Single train simulation and the federal government’s Greenhouse gases Regulated Emissions and Energy use in Transportation (GREET) model are used in combination to evaluate the feasibility of various train and powertrain configurations. The Piedmont intercity service operating in North Carolina is used as a case study. The study includes six train configurations and powertrain options as well as nine hydrogen supply options in addition to the diesel supply. The results show that a hydrail option is not only feasible but a low- or zero-carbon hydrogen supply chain could be possible.
The Market Introduction of Hydrogen Focussing on Bus Refueling
Dec 2023
Publication
Public transport plays a prominent role with respect to mitigating transport-related environmental effects by improving passenger transport efficiency and the quality of life in cities. Batteries and fuel cells are at the forefront of the technological shift to zero-emission powertrains. Within the scope of the German-funded project BIC H2 corresponding systems analysis research focuses on the market introduction of fuel cell–electric buses in the Rhine–Ruhr Metropolitan Region through 2035. This study presents the related methods and major outcomes of this techno-economic research which spans spatially-resolved hydrogen demand modeling of all relevant sectors to hydrogen refueling stations and upstream infrastructure modeling to scenario-based analyses. The latter builds upon an empirical study supporting the development of the Hydrogen Roadmap of the State of North Rhine–Westphalia (NRW). Our results show that the demand in NRW alone is expected to account for one third of total German hydrogen use. Hydrogen bus refueling could substantially support market introduction during its early phases. In the long term however hydrogen demand in industry is significantly higher compared to that in the transport sector. Furthermore spatial analysis identifies regions with pronounced hydrogen demands that could therefore be candidates for initial infrastructure investments. With the Cologne area showing the highest hydrogen demand levels such regions can offer particularly high infrastructure utilization e.g. for bus refueling. On the infrastructure side trailers for transporting gaseous hydrogen to refueling stations are the most favorable option through 2035. Pipelines would be the preferred solution soon after 2035 due to increased hydrogen demand. If effectively deployed converted natural gas pipelines would be the most cost-effective option even earlier.
Quantitative Risk Assessment of Hydrogen Refueling Station in Cheonan City of South Korea
Oct 2023
Publication
The average temperature of the Earth has risen due to the accumulation of greenhouse gases emitted from the usage of fossil fuels. The consequential climate changes have caused various problems fueling the growing demand for environmentally friendly energy sources that can replace fossil fuels. Batteries and hydrogen have thus been utilized as substitute energy sources for automobiles to reduce fossil fuel consumption. Consequently the number of hydrogen refueling stations is increasing due to an increase in the number of hydrogen-powered vehicles. However several incidents have been reported in the United States of America and Japan where hydrogen refueling stations have been operating for a long time. A risk assessment of hydrogen refueling stations operating in urban areas was performed in this study by calculating the risk effect range using a process hazard analysis tool (PHAST) v8.7 from DNV-GL and a hydrogen risk assessment model (HyRAM) from Sandia National Laboratories (SNL). The societal risk was assessed through a probit model based on the calculation results. The assessment results showed that the risk caused by jet fire and overpressure in an incident is lower than the ‘as low as reasonably practicable’ (ALARP) level.
Performance and Failure Analysis of a Retrofitted Cessna Aircraft with a Fuel Cell Power System Fuelled with Liquid Hydrogen
Jan 2022
Publication
Proton-Exchange Membrane-Fuel Cells (PEM-FC) are regarded as one of the prime candidates to provide emissions-free electricity for propulsion systems of aircraft. Here a turbocharged Fuel Cell Power System (FCPS) powered with liquid H2 (LH2) is designed and modelled to provide a primary power source in retrofitted Cessna 208 Caravan aircraft. The proposed FCPS comprises multiple PEM-FCs assembled in stacks two single-stage turbochargers to mitigate the variation of the ambient pressure with altitude two preheaters two humidifiers and two combustors. Interlinked component sub-models are constructed in MATLAB and referenced to commercially available equipment. The FCPS model is used to simulate steady-state responses in a proposed 1.5 h (∼350 km) mission flight determining the overall efficiency of the FCPS at 43% and hydrogen consumption of ∼28 kg/h. The multi-stack FCPS is modelled applying parallel fluidic and electrical architectures analysing two power-sharing methods: equally distributed and daisy-chaining. The designed LH2-FCPS is then proposed as a power system to a retrofitted Cessna 208 Caravan and with this example analysed for the probability of failure occurrence. The results demonstrate that the proposed “dual redundant” FCPS can reach failure rates comparable to commercial jet engines with a rate below 1.6 failures per million hours.
Renewable Hydrogen and Synthetic Fuels Versus Fossil Fuels for Trucking, Shipping and Aviation: A Holistic Cost Model
Aug 2023
Publication
Potential carbon neutrality of the global trucking shipping and aviation sectors by 2050 could be achieved by substituting fossil fuels with renewable hydrogen and synthetic fuels. To investigate the economic impact of fuel substitution over time a holistic cost model is developed and applied to three case studies in Norway an early adopter of carbon-neutral freight transport. The model covers the value chains from local electricity and fuel production (hydrogen ammonia Fischer–Tropsch e-fuel) to fuel consumption for long-haul trucking short-sea shipping and mid-haul aviation. The estimates are internally consistent and allow cross-mode and cross-fuel comparisons that set this work apart from previous studies more narrowly focused on a given transport mode or fuel. The model contains 150 techno-economic parameters to identify which components along the value chains drive levelized costs. This paper finds a cost reduction potential for renewable fuels of 41% to 68% until 2050 but carbon-neutral transport will suffer asymmetric cost disadvantages. Fuel substitution is most expensive in short-sea shipping followed by mid-haul aviation and long-haul trucking. Cost developments of electricity direct air capture of carbon vehicle expenses and fuel-related payload losses are significant drivers.
Hydrogen Refuelling Station Calibration with a Traceable Gravimetric Standard
Apr 2020
Publication
Of all the alternatives to hydrocarbon fuels hydrogen offers the greatest long-term potential to radically reduce the many problems inherent in fuel used for transportation. Hydrogen vehicles have zero tailpipe emissions and are very efficient. If the hydrogen is made from renewable sources such as nuclear power or fossil sources with carbon emissions captured and sequestered hydrogen use on a global scale would produce almost zero greenhouse gas emissions and greatly reduce air pollutant emissions. The aim of this work is to realise a traceability chain for hydrogen flow metering in the range typical for fuelling applications in a wide pressure range with pressures up to 875 bar (for Hydrogen Refuelling Station - HRS with Nominal Working Pressure of 700 bar) and temperature changes from −40 °C (pre-cooling) to 85 °C (maximum allowed vehicle tank temperature) in accordance with the worldwide accepted standard SAE J2601. Several HRS have been tested in Europe (France Netherlands and Germany) and the results show a good repeatability for all tests. This demonstrates that the testing equipment works well in real conditions. Depending on the installation configuration some systematic errors have been detected and explained. Errors observed for Configuration 1 stations can be explained by pressure differences at the beginning and end of fueling in the piping between the Coriolis Flow Meter (CFM) and the dispenser: the longer the distance the bigger the errors. For Configuration 2 where this distance is very short the error is negligible.
Seasonal Hydrogen Storage for Residential On- and Off-grid Solar Photovoltaics Prosumer Applications: Revolutionary Solution or Niche Market for the Energy Transition until 2050?
Apr 2023
Publication
Appropriate climate change mitigation requires solutions for all actors of the energy system. The residential sector is a major part of the energy system and solutions for the implementation of a seasonal hydrogen storage system in residential houses has been increasingly discussed. A global analysis of prosumer systems including seasonal hydrogen storage with water electrolyser hydrogen compressor storage tank and a fuel cell studying the role of such a seasonal household storage in the upcoming decades is not available. This study aims to close this research gap via the improved LUT-PROSUME model which models a fully micro sector coupled residential photovoltaic prosumer system with linear optimisation for 145 regions globally. The modelling of the cost development of hydrogen storage components allows for the simulation of a residential system from 2020 until 2050 in 5-year steps in hourly resolution. The systems are cost-optimised for either on– or off-grid operation in eight scenarios including battery electric vehicles which can act as an additional vehicle-to-home electricity storage for the system. Results show that implementation of seasonal hydrogen systems only occurs in least cost solutions in high latitude countries when the system is forced to run in off-grid mode. In general a solar photovoltaic plus battery system including technologies that can cover the heat demand is the most economic choice and can even achieve lower cost than a full grid supply in off-grid operation for most regions until 2050. Additional parameters including the self-consumption ratio the demand cover ratio and the heat cover ratio can therefore not be improved by seasonal storage systems if economics is the main deciding factor for a respective system. Further research opportunities and possible limitations of the system are then identified.
Dynamic Simulation and Thermoeconomic Analysis of a Power to Gas System
Sep 2023
Publication
Power to gas technology is an innovative solution to promote the use of renewable energy technologies also including e-fuels. This work presents a techno-economic analysis of a novel concept of a renewable power to gas plant. A 2.4 MW solid oxide electrolyzer fed by a 3.1 MW photovoltaic field is coupled with a biomethane production unit to produce synthetic methane by means of a 2.4 MW methanation unit. The hydrogen produced by the electrolyzer is used for the methanation reaction aiming at producing natural gas at net zero carbon emissions. The CO2 is obtained as a byproduct of the membrane separation in a biogas upgrading unit. The methanation unit and the electrolyzer models are developed in MatLab and integrated in TRNSYS to perform a dynamic simulation of all the components and the system as a whole. Dynamic simulation results show a 42% increase in the production of natural gas from renewable energy sources. The thermoeconomic analysis shows a remarkable primary energy saving index of 176% and a total amount of 896 tons of CO2 equivalent emissions saved. As expected the critical point is the economic feasibility since the simple payback is 9 years in case local incentives and subsidies are considered. The parametric analysis on the photovoltaic capacity shows that the simple payback dramatically depends on such design parameter varying from 6 years in the best case scenario to 92 years in the worst case scenario.
Optimal Design for a Hybrid Microgrid-hydrogen Storage Facility in Saudi Arabia
May 2022
Publication
Background: Sustainable development requires access to afordable reliable and efcient energy to lift billions of people out of poverty and improve their standard of living. The development of new and renewable forms of energy that emit less CO2 may not materialize quickly enough or at a price point that allows people to attain the standard of living they desire and deserve. As a result a parallel path to sustainability must be developed that uses both renewable and clean carbon-based methods. Hybrid microgrids are promoted to solve various electrical and energy-related issues that incorporate renewable energy sources such as photovoltaics wind diesel generation or a combination of these sources. Utilizing microgrids in electric power generation has several benefts including clean energy increased grid stability and reduced congestion. Despite these advantages microgrids are not frequently deployed because of economic concerns. To address these fnancial concerns it is necessary to explore the ideal confguration of micro-grids based on the quantity quality and availability of sustainable energy sources used to install the microgrid and the optimal design of microgrid components. These considerations are refected in net present value and levelized energy cost. Methods: HOMER was used to simulate numerous system confgurations and select the most feasible solution according to the net present value levelizied cost of energy and hydrogen operating cost and renewable fraction. HOMER performed a repeated algorithm process to determine the most feasible system configuration and parameters with the least economic costs and highest benefits to achieve a practically feasible system configuration. Results: This article aimed to construct a cost-effective microgrid system for Saudi Arabia’s Yanbu city using five configurations using excess energy to generate hydrogen. The obtained results indicate that the optimal configuration for the specified area is a hybrid photovoltaic/wind/battery/generator/fuel cell/hydrogen electrolyzer microgrid with a net present value and levelized energy cost of $10.6 billion and $0.15/kWh. Conclusion: With solar photovoltaic and wind generation costs declining building electrolyzers in locations with excellent renewable resource conditions such as Saudi Arabia could become a low-cost hydrogen supply option even when accounting for the transmission and distribution costs of transporting hydrogen from renewable resource locations to end-users. The optimum confguration can generate up to 32132 tons of hydrogen per year (tH2/year) and 380824 tons per year of CO2 emissions can be avoided.
A Theoretical Study on the Hydrogen Filling Process of the On-board Storage Cylinder in Hydrogen Refueling Station
May 2023
Publication
With the development of the hydrogen fuel automobile industry higher requirements are put forward for the construction of hydrogen energy infrastructure the matching of parameters and the control strategy of hydrogen filling rate in the hydrogen charging process of hydrogen refueling stations. At present the technological difficulty of hydrogen fueling is mainly reflected in the balanced treatment of reducing the temperature rise of hydrogen and shortening the filling time during the fast filling process. Vehicle hydrogen storage cylinder (VHSC) is one of the important components of hydrogen fuel cell vehicles. This study proposed a theoretical model for calculating the temperature rise in the VHSC during the high pressure refueling process and revealed the hydrogen temperature rise during refueling. A hydrogen temperature rise prediction model was constructed to elucidate the relationship between filling parameters and temperature rise. The filling process of VHSC was analyzed from the theoretical method. The theoretical analysis results were consistent with the simulation and experimental analysis results which provided a theoretical basis for the current hydrogen temperature control algorithm of the gas source in the hydrogen refueling station and then reduced the energy consumption required for hydrogen cooling in the hydrogen refueling station.
The Bio Steel Cycle: 7 Steps to Net-Zero CO2 Emissions Steel Production
Nov 2022
Publication
CO2 emissions have been identified as the main driver for climate change with devastating consequences for the global natural environment. The steel industry is responsible for ~7–11% of global CO2 emissions due to high fossil-fuel and energy consumption. The onus is therefore on industry to remedy the environmental damage caused and to decarbonise production. This desk research report explores the Bio Steel Cycle (BiSC) and proposes a seven-step-strategy to overcome the emission challenges within the iron and steel industry. The true levels of combined CO2 emissions from the blast-furnace and basic-oxygen-furnace operation at 4.61 t of CO2 emissions/t of steel produced are calculated in detail. The BiSC includes CO2 capture implementing renewable energy sources (solar wind green H2 ) and plantation for CO2 absorption and provision of biomass. The 7-step-implementation-strategy starts with replacing energy sources develops over process improvement and installation of flue gas carbon capture and concludes with utilising biogas-derived hydrogen as a product from anaerobic digestion of the grown agrifood in the cycle. In the past CO2 emissions have been seemingly underreported and underestimated in the heavy industries and implementing the BiSC using the provided seven-steps-strategy will potentially result in achieving net-zero CO2 emissions in steel manufacturing by 2030.
Energy Management Strategy Based on Dynamic Programming with Durability Extension for Fuel Cell Hybrid Tramway
Sep 2021
Publication
This paper proposes an energy management strategy for a fuel cell (FC) hybrid power system based on dynamic programming and state machine strategy which takes into account the durability of the FC and the hydrogen consumption of the system. The strategy first uses the principle of dynamic programming to solve the optimal power distribution between the FC and supercapacitor (SC) and then uses the optimization results of dynamic programming to update the threshold values in each state of the finite state machine to realize real-time management of the output power of the FC and SC. An FC/SC hybrid tramway simulation platform is established based on RTLAB real-time simulator. The compared results verify that the proposed EMS can improve the durability of the FC increase its working time in the high-efficiency range effectively reduce the hydrogen consumption and keep the state of charge in an ideal range.
Renewable Energy Transport via Hydrogen Pipelines and HVDC Transmission Lines
May 2021
Publication
The majority penetration of Variable Renewable Energy (VRE) will challenge the stability of electrical transmission grids due to unpredictable peaks and troughs of VRE generation. With renewable generation located further from high demand urban cores there will be a need to develop new transmission pathways to deliver the power. This paper compares the transport and storage of VRE through a hydrogen pipeline to the transport of VRE through a High Voltage Direct Current (HVDC) transmission line. The analysis found a hydrogen pipeline can offer a cost-competitive method for VRE transmission compared to a HVDC transmission line on a life-cycle cost basis normalized by energy flows for distances at 1000 miles with 2030 technology. This finding has implications for policy makers project developers and system operators for the future development of transmission infrastructure projects given the additionality which hydrogen pipelines can provide in terms of energy storage.
Decarbonization Pathways, Strategies, and Use Cases to Achieve Net-Zero CO2 Emissions in the Steelmaking Industry
Oct 2023
Publication
The steelmaking industry is responsible for 7% of global CO2 emissions making decarbonization a significant challenge. This review provides a comprehensive analysis of current steel-production processes assessing their environmental impact in terms of CO2 emissions at a global level. Limitations of the current pathways are outlined by using objective criteria and a detailed review of the relevant literature. Decarbonization strategies are rigorously evaluated across various scenarios emphasizing technology feasibility. Focusing on three pivotal areas—scrap utilization hydrogen integration and electricity consumption—in-depth assessments are provided backed by notable contributions from both industrial and scientific fields. The intricate interplay of technical economic and regulatory considerations substantially affects CO2 emissions particularly considering the EU Emissions Trading System. Leading steel producers have established challenging targets for achieving carbon neutrality requiring a thorough evaluation of industry practices. This paper emphasizes tactics to be employed within short- medium- and long-term periods. This article explores two distinct case studies: One involves a hot rolling mill that utilizes advanced energy techniques and uses H2 for the reheating furnace resulting in a reduction of 229 kt CO2 -eq per year. The second case examines DRI production incorporating H2 and achieves over 90% CO2 reduction per ton of DRI.
Design and Analysis of Cryogenic Cooling System for Electric Propulsion System Using Liquid Hydrogen
Jan 2023
Publication
As the demand for eco-friendly energy increases hydrogen energy and liquid hydrogen storage technologies are being developed as an alternative. Hydrogen has a lower liquefaction point and higher thermal conductivity than nitrogen or neon used in general cryogenic systems. Therefore the application of hydrogen to cryogenic systems can increase efficiency and stability. This paper describes the design and analysis of a cryogenic cooling system for an electric propulsion system using liquid hydrogen as a refrigerant and energy source. The proposed aviation propulsion system (APS) consists of a hydrogen fuel cell a battery a power distribution system and a motor. For a lab-scale 5 kW superconducting motor using a 2G high-temperature superconducting (HTS) wire the HTS motor and cooling system were analyzed for electromagnetic and thermal characteristics using a finite element method-based analysis program. The liquid hydrogen-based cooling system consists of a pre-cooling system a hydrogen liquefaction system and an HTS coil cooling system. Based on the thermal load analysis results of the HTS coil the target temperature for hydrogen gas pre-cooling the number of buffer layers and the cryo-cooler capacity were selected to minimize the thermal load of the hydrogen liquefaction system. As a result the hydrogen was stably liquefied and the temperature of the HTS coil corresponding to the thermal load of the designed lab-scale HTS motor was maintained at 30 K.
A Hydrogen Supply-chain Model Powering Australian Isolated Communities
Oct 2023
Publication
This article proposes a supply chain-based green hydrogen microgrid modelling for a number of remote Australian communities. Green hydrogen can be used as an emissions-free fuel source for electricity generation in places where large-scale renewable energy production is impossible due to land availability population or government regulations. This research focuses on the Torres Strait Island communities in northern Australia where the transition from diesel to renewable electricity generation is difficult due to very limited land availability on most islands. Due to geographical constraints low population and smaller electrical load the green hydrogen needs to be sourced from somewhere else. This research presents a green hydrogen supply chain model that leverages the land availability of one island to produce hydrogen to supply other island communities. In addition this research presents a model of producing and transporting green hydrogen while supplying cheaper electricity to the communities at focus. The study has used a transitional scenario planning approach and the HOMER simulation platform to find the least-cost solution. Based on the results a levelised cost of energy range of AU$0.42 and AU$0.44 was found. With the help of a green hydrogen supply chain CO2 emissions at the selected sites could be cut by 90 %. This study can be used as a guide for small clustered communities that could not support or justify large-scale renewable generation facilities but need more opportunities to install renewable generation.
Integrated Energy System Optimal Operation in Coal District With Hydrogen Heavy Trucks
Sep 2021
Publication
The coal industry contributes significantly to the social economy but the emission of greenhouse gases puts huge pressure on the environment in the process of mining transportation and power generation. In the integrated energy system (IES) the current research about the power-to-gas (P2G) technology mainly focuses on the injection of hydrogen generated from renewable energy electrolyzed water into natural gas pipelines which may cause hydrogen embrittlement of the pipeline and cannot be repaired. In this paper sufficient hydrogen energy can be produced through P2G technology and coal-to-hydrogen (C2H) of coal gasification considering the typical scenario of coal district is rich in coal and renewable energy. In order to transport the mined coal to the destination hydrogen heavy trucks have a broad space for development which can absorb hydrogen energy in time and avoid potentially dangerous hydrogen injection into pipelines and relatively expensive hydrogen storage. An optimized scheduling model of electric-gas IES is proposed based on second-order cone programming (SOCP). In the model proposed above the closed industrial loop (including coal mining hydrogen production truck transportation of coal and integrated energy systems) has been innovatively studied to consume renewable energy and coordinate multi-energy. Finally an electric-gas IES study case constructed by IEEE 30-node power system and Belgium 24-node natural gas network was used to analyze. The results show that by introducing the proposed hydrogen production technology typical daily operating costs are effectively reduced by 7.7%. Under China’s carbon emissions trading system the operating costs of hydrogen heavy trucks have been reduced by 0.95 and 4.68% respectively compared with electric vehicles and diesel trucks. Under Europe’s stricter carbon emissions trading system the percentages of cost reduction are 2.56 and 9.12% respectively. The above technical results verify the feasibility economy low carbon and effectiveness of the proposed mechanism.
Color-Coded Hydrogen: Production and Storage in Maritime Sector
Dec 2022
Publication
To reduce pollution from ships in coastal and international navigation shipping companies are turning to various technological solutions mostly based on electrification and the use of alternative fuels with a lower carbon footprint. One of the alternatives to traditional diesel fuel is the use of hydrogen as a fuel or hydrogen fuel cells as a power source. Their application on ships is still in the experimental phase and is limited to smaller ships which serve as a kind of platform for evaluating the applicability of different technological solutions. However the use of hydrogen on a large scale as a primary energy source on coastal and ocean-going vessels also requires an infrastructure for the production and safe storage of hydrogen. This paper provides an overview of color-based hydrogen classification as one of the main methods for describing hydrogen types based on currently available production technologies as well as the principles and safety aspects of hydrogen storage. The advantages and disadvantages of the production technologies with respect to their application in the maritime sector are discussed. Problems and obstacles that must be overcome for the successful use of hydrogen as a fuel on ships are also identified. The issues presented can be used to determine long-term indicators of the global warming potential of using hydrogen as a fuel in the shipping industry and to select an appropriate cost-effective and environmentally sustainable production and storage method in light of the technological capabilities and resources of a particular area.
Perspectives on the Development of Technologies for Hydrogen as a Carrier of Sustainable Energy
Aug 2023
Publication
Hydrogen is a prospective energy carrier because there are practically no gaseous emissions of greenhouse gases in the atmosphere during its use as a fuel. The great benefit of hydrogen being a practically inexhaustible carbon-free fuel makes it an attractive alternative to fossil fuels. I.e. there is a circular process of energy recovery and use. Another big advantage of hydrogen as a fuel is its high energy content per unit mass compared to fossil fuels. Nowadays hydrogen is broadly used as fuel in transport including fuel cell applications as a raw material in industry and as an energy carrier for energy storage. The mass exploitation of hydrogen in energy production and industry poses some important challenges. First there is a high price for its production compared to the price of most fossil fuels. Next the adopted traditional methods for hydrogen production like water splitting by electrolysis and methane reforming lead to the additional charging of the atmosphere with carbon dioxide which is a greenhouse gas. This fact prompts the use of renewable energy sources for electrolytic hydrogen production like solar and wind energy hydropower etc. An important step in reducing the price of hydrogen as a fuel is the optimal design of supply chains for its production distribution and use. Another group of challenges hindering broad hydrogen utilization are storage and safety. We discuss some of the obstacles to broad hydrogen application and argue that they should be overcome by new production and storage technologies. The present review summarizes the new achievements in hydrogen application production and storage. The approach of optimization of supply chains for hydrogen production and distribution is considered too.
Recent Advances in Sustainable and Safe Marine Engine Operation with Alternative Fuels
Nov 2022
Publication
Pursuing net-zero emission operations in the shipping industry are quintessential for this sector to mitigate the environmental impact caused by hydrocarbon fuel combustion. Significant contributions to this are expected from the substitution of conventional marine fuels by alternative emission-free fuels with lower emission footprints. This study aims to conduct a comprehensive literature review for delineating the main characteristics of the considered alternative fuels specifically focusing on hydrogen methanol and ammonia which have recently attracted attention from both industry and academia. This study comparatively assesses the potential of using these fuels in marine engines and their subsequent performance characteristics as well as the associated environmental benefits. In addition the required storage conditions space as well as the associated costs are reviewed. Special attention is given to the safety characteristics and requirements for each alternative fuel. The results of this study demonstrate that the environmental benefits gained from alternative fuel use are pronounced only when renewable energy is considerably exploited for their production whereas the feasibility of each fuel depends on the vessel type used and pertinent storage constraints. Hydrogen ammonia and methanol are considered best-fit solutions for small scale shipping requiring minimal on-board storage. In addition the need for comparative assessments between diesel and alternative fuels is highlighted and sheds light on marine engines’ operational characteristics. Moreover using combinations of alternative and diesel fuels is identified as a direction towards decarbonisation of the maritime sector; intensifying the need for optimisation studies on marine engine design and operation. This study concludes with recommendations for future research directions thus contributing to fuel research concepts that can facilitate the shipboard use of alternative fuels.
Techno-Economic Assessment of Power-to-Liquids (PtL) Fuels Production and Global Trading Based on Hybrid PV-Wind Power Plants
Nov 2016
Publication
This paper introduces a value chain design for transportation fuels and a respective business case taking into account hybrid PV-Wind power plants electrolysis and hydrogen-to-liquids (H2tL) based on hourly resolved full load hours (FLh). The value chain is based on renewable electricity (RE) converted by power-to-liquids (PtL) facilities into synthetic fuels mainly diesel. Results show that the proposed RE-diesel value chains are competitive for crude oil prices within a minimum price range of about 79 - 135 USD/barrel (0.44 – 0.75 €/l of diesel production cost) depending on the chosen specific value chain and assumptions for cost of capital available oxygen sales and CO2 emission costs. A sensitivity analysis indicates that the RE-PtL value chain needs to be located at the best complementing solar and wind sites in the world combined with a de-risking strategy and a special focus on mid to long-term electrolyser and H2tL efficiency improvements. The substitution of fossil fuels by hybrid PV-Wind power plants could create a PV-wind market potential in the order of terawatts.
Development and Testing of a 100 kW Fuel-flexible Micro Gas Turbine Running on 100% Hydrogen
Jun 2023
Publication
Hydrogen as a carbon-free energy carrier has emerged as a crucial component in the decarbonization of the energy system serving as both an energy storage option and fuel for dispatchable power generation to mitigate the intermittent nature of renewable energy sources. However the unique physical and combustion characteristics of hydrogen which differ from conventional gaseous fuels such as biogas and natural gas present new challenges that must be addressed. To fully integrate hydrogen as an energy carrier in the energy system the development of low-emission and highly reliable technologies capable of handling hydrogen combustion is imperative. This study presents a ground-breaking achievement - the first successful test of a micro gas turbine running on 100% hydrogen with NOx emissions below the standard limits. Furthermore the combustor of the micro gas turbine demonstrates exceptional fuel flexibility allowing for the use of various blends of hydrogen biogas and natural gas covering a wide range of heating values. In addition to a comprehensive presentation of the test rig and its instrumentation this paper illuminates the challenges of hydrogen combustion and offers real-world operational data from engine operation with 100% hydrogen and its blends with methane.
A Newly Proposed Method for Hydrogen Storage in a Metal Hydride Storage Tank Intended for Maritime and Inland Shipping
Aug 2023
Publication
The utilisation of hydrogen in ships has important potential in terms of achieving the decarbonisation of waterway transport which produces approximately 3% of the world’s total emissions. However the utilisation of hydrogen drives in maritime and inland shipping is conditioned by the efficient and safe storage of hydrogen as an energy carrier on ship decks. Regardless of the type the constructional design and the purpose of the aforesaid vessels the preferred method for hydrogen storage on ships is currently high-pressure storage with an operating pressure of the fuel storage tanks amounting to tens of MPa. Alternative methods for hydrogen storage include storing the hydrogen in its liquid form or in hydrides as adsorbed hydrogen and reformed fuels. In the present article a method for hydrogen storage in metal hydrides is discussed particularly in a certified low-pressure metal hydride storage tank—the MNTZV-159. The article also analyses the 2D heat conduction in a transversal cross-section of the MNTZV-159 storage tank for the purpose of creating a final design of the shape of a heat exchanger (intensifier) that will help to shorten the total time of hydrogen absorption into the alloy i.e. the filling process. Based on the performed 3D calculations for heat conduction the optimisation and implementation of the intensifier into the internal volume of a metal hydride alloy will increase the performance efficiency of the shell heat exchanger of the MNTZV-159 storage tank. The optimised design increased the cooling power by 46.1% which shortened the refuelling time by 41% to 2351 s. During that time the cooling system which comprised the newly designed internal heat transfer intensifier was capable of eliminating the total heat from the surface of the storage tank thus preventing a pressure increase above the allowable value of 30 bar.
Study on the Effects of the Hydrogen Substitution Rate on the Performance of a Hydrogen–Diesel Dual-Fuel Engine under Different Loads
Aug 2023
Publication
Due to having zero carbon emissions and renewable advantages hydrogen has great prospects as a renewable form of alternate energy. Engine load and hydrogen substitution rate have a considerable influence on a hydrogen–diesel dual-fuel engine’s efficiency. This experiment’s objective is to study the influence of hydrogen substitution rate on engine combustion and emission under different loads and to study the impact of exhaust gas recirculation (EGR) technology or main injection timing on the engine’s capability under high load and high hydrogen substitution rate. The range of the maximum hydrogen substitution rate was determined under different loads (30%~90%) at 1800 rpm and then the effects of the EGR rate (0%~15%) and main injection timing (−8 ◦CA ATDC~0 ◦CA ATDC) on the engine performance under 90% high load were studied. The research results show that the larger the load the smaller the maximum hydrogen substitution rate that can be added to the dual-fuel engine. Under each load with the increase of the hydrogen substitution rate the cylinder pressure and the peak heat release rate (HRR) increase the equivalent brake-specific fuel consumption (BSFCequ) decreases the thermal efficiency increases the maximum thermal efficiency is 43.1% the carbon dioxide (CO2 ) emission is effectively reduced by 35.2% and the nitrogen oxide (NOx) emission decreases at medium and low loads and the maximum increase rate is 20.1% at 90% load. Under high load with the increase of EGR rate or the delay of main injection timing the problem of NOx emission increases after hydrogen doping can be effectively solved. As the EGR rate rises from 0% to 15% the maximum reduction of NOx is 63.1% and with the delay of main injection timing from −8 ◦CA ATDC to 0 ◦CA ATDC the maximum reduction of NOx is 44.5%.
Evaluation of Sourcing Decision for Hydrogen Supply Chain Using an Integrated Multi-Criteria Decision Analysis (MCDA) Tool
Apr 2023
Publication
The use of fossil fuels has caused many environmental issues including greenhouse gas emissions and associated climate change. Several studies have focused on mitigating this problem. One dynamic direction for emerging sources of future renewable energy is the use of hydrogen energy. In this research we evaluate the sourcing decision for a hydrogen supply chain in the context of a case study in Thailand using group decision making analysis for policy implications. We use an integrative multi-criteria decision analysis (MCDA) tool which includes an analytic hierarchy process (AHP) fuzzy AHP (FAHP) and data envelopment analysis (DEA) to analyze weighted criteria and sourcing alternatives using data collected from a group of selected experts. A list of criteria related to sustainability paradigms and sourcing decisions for possible use of hydrogen energy including natural gas coal biomass and water are evaluated. Our results reveal that political acceptance is considered the most important criterion with a global weight of 0.514 in the context of Thailand. Additionally natural gas is found to be the foreseeable source for hydrogen production in Thailand with a global weight of 0.313. We also note that the analysis is based on specific data inputs and that an alternative with a lower score does not imply that the source is not worth exploring.
Preliminary Design and Simulation of a Thermal Management System with Integrated Secondary Power Generation Capability for a Mach 8 Aircraft Concept Exploiting Liquid Hydrogen
Feb 2023
Publication
This paper introduces the concept of a thermal management system (TMS) with integrated on-board power generation capabilities for a Mach 8 hypersonic aircraft powered by liquid hydrogen (LH2). This work developed within the EU-funded STRATOFLY Project aims to demonstrate an opportunity for facing the challenges of hypersonic flight for civil applications mainly dealing with thermal and environmental control as well as propellant distribution and on-board power generation adopting a highly integrated plant characterized by a multi-functional architecture. The TMS concept described in this paper makes benefit of the connection between the propellant storage and distribution subsystems of the aircraft to exploit hydrogen vapors and liquid flow as the means to drive a thermodynamic cycle able on one hand to ensure engine feed and thermal control of the cabin environment while providing on the other hand the necessary power for other on-board systems and utilities especially during the operation of high-speed propulsion plants which cannot host traditional generators. The system layout inspired by concepts studied within precursor EU-funded projects is detailed and modified in order to suggest an operable solution that can be installed on-board the reference aircraft with focus on those interfaces impacting its performance requirements and integration features as part of the overall systems architecture of the plane. Analysis and modeling of the system is performed and the main results in terms of performance along the reference mission profile are discussed.
Optimal Configuration and Scheduling Model of a Multi-Park Integrated Energy System Based on Sustainable Development
Mar 2023
Publication
To maximize the utilization of renewable energy (RE) as much as possible in cold areas while reducing traditional energy use and carbon dioxide emissions a three-layer configuration optimization and scheduling model considering a multi-park integrated energy system (MPIES) a shared energy storage power station (SESPS) and a hydrogen refueling station (HRS) cooperation based on the Wasserstein generative adversarial networks the simultaneous backward reduction technique and the Quantity-Contour (WGAN-SBR_QC) method is proposed. Firstly the WGAN-SBR_QC method is used to generate typical scenarios of RE output. Secondly a three-layer configuration and schedule optimization model is constructed using MPIES SESPS and HRS. Finally the model’s validity is investigated by selecting a multi-park in Eastern Mongolia. The results show that: (1) the typical scenario of RE output improved the overall robustness of the system. (2) The profits of the MPIES and HRS increased by 1.84% and 52.68% respectively and the SESPS profit increased considerably. (3) The proposed approach increased RE utilization to 99.47% while reducing carbon emissions by 32.67%. Thus this model is a reference for complex energy system configuration and scheduling as well as a means of encouraging RE use.
A Technology Review of Decarbonization: Efficient Techniques for Producing Hydrogen as Fuel
Aug 2023
Publication
Climate change is obvious in many ways. The weather changes rapidly from day to day reaching high temperatures such as 28 ◦C one day and heavy rain the next with temperatures below 18 ◦C. There are also very strong storms caused by this phenomenon. The way the environment acts is different than the current epoch would predict indicating a long-term shift in weather and temperature patterns. The mean temperature of earth is rising due to the greenhouse effect that is caused by human activity and mostly by the burning of fossil fuel emitting CO2 and other pollutant gasses. Nowadays every country is trying to lower CO2 emissions from everyday human activities a movement called “decarbonization”. Since the 18th century there has been a great deal of research carried out on possible alternatives to fossil fuels. Some of the work was just to discover ways to power heaters or automotive vehicle but there is a great deal of work remaining to complete regarding this issue after discovering the greenhouse effect and its impact on the planet’s climate in order to eliminate it by using fuel whose combustion emissions are more environmentally friendly. In the present work many discoveries will be presented that use hydrogen (H2 ) or hydroxy (H-OH) as fuel. The main reason for this is the emission of pure water after combustion but the most interesting part is the approach every scientist uses to create the fuel gas from water.
Impact of Climate and Geological Storage Potential on Feasibility of Hydrogen Fuels
Apr 2023
Publication
Electrofuels including hydrogen methane and ammonia have been suggested as one pathway in achieving net-zero greenhouse gas energy systems. They can play a role in providing an energy storage and fuel or feedstock to hard-to-abate sectors. In future energy systems their role is often studied in case studies adhering to specific region. In this study we study their role by defining multiple archetypal energy systems which represent approximations of real systems in different regions. Comparing the role of electrofuels across the cost-optimized systems relying only on renewable energy in power generation we found that hydrogen was a significant energy vector in all systems with its annual quantity approaching the classic electricity demand. The role of renewable methane was very limited. Electrofuel storages were needed in all systems and their capacity was the highest in the northern Hemiboreal system. Absence of cavern storage potential did not hamper the significance of electrofuels but increased the role of ammonia and led to average 5.5 % systemic cost increase. Systems where reservoir hydropower was scarce or level of electricity consumption was high needed more fuel storages. The findings of this study can help for better understanding of what kind of storage and generation technologies will be most useful in future carbon-neutral systems in different types of regions.
Hydrogen Energy and Fuel Cells: A Vision of our Future
Jan 2003
Publication
This report of the High Level Group for Hydrogen and Fuel Cell Technologies sets out a vision for these technologies in future sustainable energy systems - improving energy security of supply and air quality whilst mitigating climate change. The report recommends actions for developing world-class European hydrogen technologies and fostering their commercial exploitation.
Location Optimization of Hydrogen Refueling Stations in Hydrogen Expressway Based on Hydrogen Supply Chain Cost
Jan 2021
Publication
Hydrogen energy is regarded as an important way to achieve carbon emission reduction. This paper focuses on the combination of the design of the hydrogen supply chain network and the location of hydrogen refueling stations on the expressway. Based on the cost analysis of the hydrogen supply chain a multi-objective model is developed to determine the optimal scale and location of hydrogen refueling stations on the hydrogen expressway. The proposed model considers the hydrogen demand forecast hydrogen source selection hydrogen production and storage and transportation hydrogen station refueling mode etc. Taking Dalian City China as an example with offshore wind power as a reliable green hydrogen supply to select the location and capacity of hydrogen refueling stations for the hydrogen energy demonstration section of a certain expressway under multiple scenarios. The results of the case show that 4 and 5 stations are optimized on the expressway section respectively and the unit hydrogen cost is $14.3 /kg H2 and $11.8 /kg H2 respectively which are equal to the average hydrogen price in the international range. The optimization results verify the feasibility and effectiveness of the model.
Small-Scale Hybrid and Polygeneration Renewable Energy Systems: Energy Generation and Storage Technologies, Applications, and Analysis Methodology
Dec 2022
Publication
The energy sector is nowadays facing new challenges mainly in the form of a massive shifting towards renewable energy sources as an alternative to fossil fuels and a diffusion of the distributed generation paradigm which involves the application of small-scale energy generation systems. In this scenario systems adopting one or more renewable energy sources and capable of producing several forms of energy along with some useful substances such as fresh water and hydrogen are a particularly interesting solution. A hybrid polygeneration system based on renewable energy sources can overcome operation problems regarding energy systems where only one energy source is used (solar wind biomass) and allows one to use an all-in-one integrated systems in order to match the different loads of a utility. From the point of view of scientific literature medium and large-scale systems are the most investigated; nevertheless more and more attention has also started to be given to small-scale layouts and applications. The growing diffusion of distributed generation applications along with the interest in multipurpose energy systems based on renewables and capable of matching different energy demands create the necessity of developing an overview on the topic of small-scale hybrid and polygeneration systems. Therefore this paper provides a comprehensive review of the technology operation performance and economical aspects of hybrid and polygeneration renewable energy systems in small-scale applications. In particular the review presents the technologies used for energy generation from renewables and the ones that may be adopted for energy storage. A significant focus is also given to the adoption of renewable energy sources in hybrid and polygeneration systems designs/modeling approaches and tools and main methodologies of assessment. The review shows that investigations on the proposed topic have significant potential for expansion from the point of view of system configuration hybridization and applications.
THyGA - Long Term Effect of H2 on Appliances Tested
May 2023
Publication
The goals of the long-term tests were to see the impact of blends of hydrogen and natural gas on the technical condition of the appliances and their performance after several hours of operation. To do so they were run through an accelerated test program amounting to more than 3000 testing hours for the boilers and more than 2500 testing hours for the cookers. The percentage of hydrogen in the test gas was 30% by volume. Three boilers and two cookers were tested by DGC and two boilers by GWI. This report describes the test protocol the results and analysis on the seven appliances tested.
Analyzing the Future Potential of Defossilizing Industrial Specialty Glass Production with Hydrogen by LCA
Mar 2022
Publication
The glass industry is part of the energy-intensive industry with most of the energy needed to melt the raw materials. To produce glass temperatures between 1000 and 1600 °C are necessary. Presently mostly fossil natural gas is the dominant energy source. As direct electrification is not always possible in this paper a Life Cycle Assessment (LCA) for specialty glass production is conducted where the conventional fossil-based reference process is compared to a hydrogen-fired furnace. This hydrogen can be produced on-site in an water electrolyzer using not only the hydrogen for the combustion but also the produced oxygen. Hydrogen can be produced alternatively off-site in a large scale electrolyzer to facilitate economy of scale. For the transport and distribution of this hydrogen different options are available. A rather new option are liquid organic hydrogen carriers (LOHC) which bind the hydrogen in a chemical substance. However temperatures around 300 °C are necessary to separate the hydrogen from the LOHC after transport. At the glass trough waste heat is available at the required temperature level to facilitate the dehydrogenation. The comparison is completed by the production of off-site hydrogen transported to the glass trough as conventional liquefied hydrogen in cooling tanks by truck or in hydrogen pipelines. In this assessment to power the electrolyzers the national grid mix of Germany is used. A time frame from 2020 till 2050 and its changing energy system towards defossilisation is analyzed. Regarding climate change on-site hydrogen production causes the least impact for specialty glass production in 2050. However negative trade-offs for other environmental impact categories e.g. Metal depletion are recorded.
The Role of Hydrogen in a Decarbonised Future Transport Sector: A Case Study of Mexico
Sep 2023
Publication
In recent years several approaches and pathways have been discussed to decarbonise the transport sector; however any effort to reduce emissions might be complex due to specific socio-economic and technical characteristics of different regions. In Mexico the transport sector is the highest energy consumer representing 38.9% of the national final energy demand with gasoline and diesel representing 90% of the sector´s total fuel consumption. Energy systems models are powerful tools to obtain insights into decarbonisation pathways to understand costs emissions and rate of deployment that could serve for energy policy development. This paper focuses on the modelling of the current Mexican transport system using the MUSE-MX multi-regional model with the aim to project a decarbonisation pathway through two different scenarios. The first approach being business as usual (BAU) which aims to analyse current policies implementation and the second being a goal of net zero carbon emissions by 2050. Under the considered net zero scenario results show potential deployment of hydrogen-based transport technologies especially for subsectors such as lorries (100% H2 by 2050) and freight train (25% H2 by 2050) while cars and buses tend to full electrification by 2050.
Hydrogen Application as a Fuel in Internal Combustion Engines
Mar 2023
Publication
Hydrogen is the energy vector that will lead us toward a more sustainable future. It could be the fuel of both fuel cells and internal combustion engines. Internal combustion engines are today the only motors characterized by high reliability duration and specific power and low cost per power unit. The most immediate solution for the near future could be the application of hydrogen as a fuel in modern internal combustion engines. This solution has advantages and disadvantages: specific physical chemical and operational properties of hydrogen require attention. Hydrogen is the only fuel that could potentially produce no carbon carbon monoxide and carbon dioxide emissions. It also allows high engine efficiency and low nitrogen oxide emissions. Hydrogen has wide flammability limits and a high flame propagation rate which provide a stable combustion process for lean and very lean mixtures. Near the stoichiometric air–fuel ratio hydrogen-fueled engines exhibit abnormal combustions (backfire pre-ignition detonation) the suppression of which has proven to be quite challenging. Pre-ignition due to hot spots in or around the spark plug can be avoided by adopting a cooled or unconventional ignition system (such as corona discharge): the latter also ensures the ignition of highly diluted hydrogen–air mixtures. It is worth noting that to correctly reproduce the hydrogen ignition and combustion processes in an ICE with the risks related to abnormal combustion 3D CFD simulations can be of great help. It is necessary to model the injection process correctly and then the formation of the mixture and therefore the combustion process. It is very complex to model hydrogen gas injection due to the high velocity of the gas in such jets. Experimental tests on hydrogen gas injection are many but never conclusive. It is necessary to have a deep knowledge of the gas injection phenomenon to correctly design the right injector for a specific engine. Furthermore correlations are needed in the CFD code to predict the laminar flame velocity of hydrogen–air mixtures and the autoignition time. In the literature experimental data are scarce on air–hydrogen mixtures particularly for engine-type conditions because they are complicated by flame instability at pressures similar to those of an engine. The flame velocity exhibits a non-monotonous behavior with respect to the equivalence ratio increases with a higher unburnt gas temperature and decreases at high pressures. This makes it difficult to develop the correlation required for robust and predictive CFD models. In this work the authors briefly describe the research path and the main challenges listed above.
Precise Dynamic Modelling of Real-World Hybrid Solar-Hydrogen Energy Systems for Grid-Connected Buildings
Jul 2023
Publication
Hybrid renewable hydrogen energy systems could play a key role in delivering sustainable solutions for enabling the Net Zero ambition; however the lack of exact computational modelling tools for sizing the integrated system components and simulating their real-world dynamic behaviour remains a key technical challenge against their widespread adoption. This paper addresses this challenge by developing a precise dynamic model that allows sizing the rated capacity of the hybrid system components and accurately simulating their real-world dynamic behaviour while considering effective energy management between the grid-integrated system components to ensure that the maximum possible proportion of energy demand is supplied from clean sources rather than the grid. The proposed hybrid system components involve a solar PV system electrolyser pressurised hydrogen storage tank and fuel cell. The developed hybrid system model incorporates a set of mathematical models for the individual system components. The developed precise dynamic model allows identifying the electrolyser’s real-world hydrogen production levels in response to the input intermittent solar energy production while also simulating the electrochemical behaviour of the fuel cell and precisely quantifying its real-world output power and hydrogen consumption in response to load demand variations. Using a university campus case study building in Scotland the effectiveness of the developed model has been assessed by benchmarking comparison between its results versus those obtained from a generic model in which the electrochemical characteristics of the electrolyser and fuel cell systems were not taken into consideration. Results from this comparison have demonstrated the potential of the developed model in simulating the real-world dynamic operation of hybrid solar hydrogen energy systems for grid-connected buildings while sizing the exact capacity of system components avoiding oversizing associated with underutilisation costs and inaccurate simulation.
Hydrogen in the Electricity Value Chain
Mar 2019
Publication
Renewable energy sources like solar-PV and wind and the electrification of heating demand lead to more variability in the generation and demand of electricity. The need for flexibility in the electricity supply system e.g. by energy storage will therefore increase. Hydrogen has been a long-serving CO2-free energy carrier apt to store energy over a long period of time without significant losses.
Life-cycle Assessment of Hydrogen Utilization in Power Generation: A Systematic Review of Technological and Methodological Choices
Jul 2022
Publication
Interest in reducing the greenhouse gas emissions from conventional power generation has increased the focus on the potential use of hydrogen to produce electricity. Numerous life-cycle assessment (LCA) studies of hydrogen-based power generation have been published. This study reviews the technological and methodological choices made in hydrogen-based power generation LCAs. A systematic review was chosen as the research method to achieve a comprehensive and minimally biased overview of hydrogen-based power generation LCAs. Relevant articles published between 2004 and 2021 were identified by searching the Scopus and Web of Science databases. Electrolysis from renewable energy resources was the most widely considered type of hydrogen production in the LCAs analyzed. Fuel cell technology was the most common conversion equipment used in hydrogen-based electricity LCAs. A significant number of scenarios examine the use of hydrogen for energy storage and co-generation purposes. Based on qualitative analysis the methodological choices of LCAs vary between studies in terms of the functional units allocations system boundaries and life-cycle impact assessment methods chosen. These discrepancies were likely to influence the value of the environmental impact results. The findings of the reviewed LCAs could provide an environmental profile of hydrogen-based electricity systems identify hotspots drive future research define performance goals and establish a baseline for their large-scale deployment.
Market Uptake and Impact of Key Green Aviation Technologies
Jan 2023
Publication
Steer was appointed by the Directorate-General of Research and Innovation (DG RTD) to undertake an overview of key green aviation technologies and conditions for their market uptake. Steer is being supported in delivery by the Institute of Air Transport and Airport Research of the German Aerospace Centre DLR. The study was undertaken in the context of the Clean Aviation Partnership’s Strategic Research and Innovation Agenda (SRIA) for the period 2030-2050. The objective of the project is to identify the prerequisites for the market entry of climate-neutral aviation technologies as well as the flanking measures required for this to be successful. The scope of the study is hydrogen and electrically powered aircraft in the regional and short/medium range categories taking a holistic view on the technological development and keeping the economic context in mind. The outcome of the study will serve as guidance for the Commission and other actors with regard to further policy or industry initiatives such as in the context of Horizon Europe or the Alliance Zero Emission Aviation.
Implementation of Fuel Cells in Aviation from a Maintenance, Repair and Overhaul Perspective
Dec 2022
Publication
Hydrogen is one of the most promising power sources for meeting the aviation sector’s long-term decarbonization goals. Although on-board hydrogen systems namely fuel cells are extensively researched the maintenance repair and overhaul (MRO) perspective remains mostly unaddressed. This paper analyzes fuel cells from an MRO standpoint based on a literature review and comparison with the automotive sector. It also examines how well the business models and key resources of MRO providers are currently suited to provide future MRO services. It is shown that fuel cells require extensive MRO activities and that these are needed to meet the aviation sector’s requirements for price safety and especially durability. To some extent experience from the automotive sector can be built upon particularly with respect to facility requirements and qualification of personnel. Yet MRO providers’ existing resources only partially allow them to provide these services. MRO providers’ underlying business models must adapt to the implementation of fuel cells in the aviation sector. MRO providers and services should therefore be considered and act as enablers for the introduction of fuel cells in the aviation industry.
Research of the Impact of Hydrogen Metallurgy Technology on the Reduction of the Chinese Steel Industry’s Carbon Dioxide Emissions
Feb 2024
Publication
The steel industry which relies heavily on primary energy is one of the industries with the highest CO2 emissions in China. It is urgent for the industry to identify ways to embark on the path to “green steel”. Hydrogen metallurgy technology uses hydrogen as a reducing agent and its use is an important way to reduce CO2 emissions from long-term steelmaking and ensure the green and sustainable development of the steel industry. Previous research has demonstrated the feasibility and emission reduction effects of hydrogen metallurgy technology; however further research is needed to dynamically analyze the overall impact of the large-scale development of hydrogen metallurgy technology on future CO2 emissions from the steel industry. This article selects the integrated MARKAL-EFOM system (TIMES) model as its analysis model constructs a China steel industry hydrogen metallurgy model (TIMES-CSHM) and analyzes the resulting impact of hydrogen metallurgy technology on CO2 emissions. The results indicate that in the business-as-usual scenario (BAU scenario) applying hydrogen metallurgy technology in the period from 2020 to 2050 is expected to reduce emissions by 203 million tons and make an average 39.85% contribution to reducing the steel industry’s CO2 emissions. In the carbon emission reduction scenario applying hydrogen metallurgy technology in the period from 2020 to 2050 is expected to reduce emissions by 353 million tons contributing an average of 41.32% to steel industry CO2 reduction. This study provides an assessment of how hydrogen metallurgy can reduce CO2 emissions in the steel industry and also provides a reference for the development of hydrogen metallurgy technology.
A Review of Liquid Hydrogen Aircraft and Propulsion Technologies
Jan 2024
Publication
Sustainable aviation is a key part of achieving Net Zero by 2050 and is arguably one of the most challenging sectors to decarbonise. Hydrogen has gained unprecedented attention as a future fuel for aviation for use within fuel cell or hydrogen gas turbine propulsion systems. This paper presents a survey of the literature and industrial projects on hydrogen aircraft and associated enabling technologies. The current and predicted technology capabilities are analysed to identify important trends and to assess the feasibility of hydrogen propulsion. Several key enabling technologies are discussed in detail and gaps in knowledge are identified. It is evident that hydrogen propelled aircraft are technologically viable by 2050. However convergence of a number of critical factors is required namely: the extent of industrial collaboration the understanding of environmental science and contrails green hydrogen production and its availability at the point of use and the safety and certification of the aircraft and supporting infrastructure.
Conceptual Design of a Hydrogen-Hybrid Dual-Fuel Regional Aircraft Retrofit
Jan 2024
Publication
A wide range of aircraft propulsion technologies is being investigated in current research to reduce the environmental impact of commercial aviation. As the implementation of purely hydrogenpowered aircraft may encounter various challenges on the airport and vehicle side combined hydrogen and kerosene energy sources may act as an enabler for the first operations with liquid hydrogen propulsion technologies. The presented studies describe the conceptual design of such a dual-fuel regional aircraft featuring a retrofit derived from the D328eco under development by Deutsche Aircraft. By electrically assisting the sustainable aviation fuel (SAF) burning conventional turboprop engines with the power of high-temperature polymer-electrolyte fuel cells the powertrain architecture enables a reduction of SAF consumption. All aircraft were modeled and investigated using the Bauhaus Luftfahrt Aircraft Design Environment. A description of this design platform and the incorporated methods to model the hydrogen-hybrid powertrain is given. Special emphasis was laid on the implications of the hydrogen and SAF dual-fuel system design to be able to assess the potential benefits and drawbacks of various configurations with the required level of detail. Retrofit assumptions were applied particularly retaining the maximum takeoff mass while reducing payload to account for the propulsion system mass increase. A fuel cell power allocation of 20% led to a substantial 12.9% SAF consumption decrease. Nonetheless this enhancement necessitated an 18.1% payload reduction accompanied by a 34.5% increment in propulsion system mass. Various additional studies were performed to assess the influence of the power split. Under the given assumptions the design of such a retrofit was deemed viable.
Numerical Study on the Use of Ammonia/Hydrogen Fuel Blends for Automotive Sparking-ignition Engines
Jun 2023
Publication
The importance of new alternative fuels has assumed great relevance in the last decades to face the issues of global warming and pollutant emissions from energy production. The scientific community is responsible for developing solutions to achieve the necessary environmental restriction policies. In this context ammonia appears as a potential fuel candidate and energy vector that may solve the technological difficulties of using hydrogen (H2 ) directly in internal combustion engines. Its high hydrogen content per unit mass higher energy density than liquid hydrogen well-developed infrastructure and experience in handling and storage make it suitable to be implemented as a long-term solution. In this work a virtual engine model was developed to perform prospective simulations of different operating conditions using ammonia and H2 -enriched ammonia as fuel in a spark-ignition (SI) engine integrating a chemical kinetics model and empirical correlations for combustion prediction. In addition specific conditions were evaluated to consider and to understand the governing parameters of ammonia combustion using computational fluid dynamics (CFD) simulations. Results revealed similar thermal efficiency than methane fuel with considerable improvements after appropriate H2 - enrichment. Moreover increasing the intake temperature and the turbulence intensity inside the cylinder evinced significant reductions in combustion duration. Finally higher compression ratios ensure efficiency gains with no evidence of abnormal combustion (knocking) even at high compression ratios (above 16:1) and low engine speeds (800 rpm). Numerical simulations showed the direct influence of the flame front surface area and the turbulent combustion velocity on efficiency reflecting the need for optimizing the SI engines design paradigm for ammonia applications.
Low-Carbon Optimal Scheduling Model for Peak Shaving Resources in Multi-Energy Power Systems Considering Large-Scale Access for Electric Vehicles
May 2023
Publication
Aiming at the synergy between a system’s carbon emission reduction demand and the economy of peak shaving operation in the process of optimizing the flexible resource peaking unit portfolio of a multi-energy power system containing large-scale electric vehicles this paper proposes a low-carbon optimal scheduling model for peak shaving resources in multi-energy power systems considering large-scale access for electric vehicles. Firstly the charging and discharging characteristics of electric vehicles were studied and a comprehensive cost model for electric vehicles heat storage and hydrogen storage was established. At the same time the carbon emission characteristics of multienergy power systems and their emission cost models under specific carbon trading mechanisms were established. Secondly the change characteristics of the system’s carbon emissions were studied and a carbon emission cost model of multi-energy power was established considering the carbon emission reduction demand of the system. Then taking the carbon emission of the system and the peak regulating operation costs of traditional units energy storage and new energy unit as optimization objectives the multi-energy power system peak regulation multi-objective optimization scheduling model was established and NSGA-II was used to solve the scheduling model. Finally based on a regional power grid data in Northeast China the improved IEEE 30 node multi-energy power system peak shaving simulation model was built and the simulation analysis verified the feasibility of the optimal scheduling model proposed in this paper.
Resilience-oriented Operation of Microgrids in the Presence of Power-to-hydrogen Systems
Jul 2023
Publication
This study presents a novel framework for improving the resilience of microgrids based on the power-to-hydrogen concept and the ability of microgrids to operate independently (i.e. islanded mode). For this purpose a model is being developed for the resilient operation of microgrids in which the compressed hydrogen produced by power-to-hydrogen systems can either be used to generate electricity through fuel cells or sold to other industries. The model is a bi-objective optimization problem which minimizes the cost of operation and resilience by (i) reducing the active power exchange with the main grid (ii) reducing the ohmic power losses and (iii) increasing the amount of hydrogen stored in the tanks. A solution approach is also developed to deal with the complexity of the bi-objective model combining a goal programming approach and Generalized Benders Decomposition due to the mixed-integer nonlinear nature of the optimization problem. The results indicate that the resilience approach although increasing the operation cost does not lead to load shedding in the event of main grid failures. The study concludes that integrating distributed power-to-hydrogen systems results in significant benefits including emission reductions of up to 20 % and cost savings of up to 30 %. Additionally the integration of the decomposition method improves computational performance by 54 % compared to using commercial solvers within the GAMS software.
The ATHENA Framework: Analysis and Design of a Strategic Hydrogen Refuelling Infrastructure
Apr 2023
Publication
With the pressured timescale in determining effective and viable net zero solutions within the transport sector it is important to understand the extent of implementing a new refuelling infrastructure for alternative fuel such as hydrogen. The proposed ATHENA framework entails three components which encapsulates the demand data analysis an optimisation model in determining the minimal cost hydrogen refuelling infrastructure design and an agent-based model simulating the operational system. As a case study the ATHENA framework is applied to Northern England focusing on the design of a hydrogen refuelling infrastructure for heavy goods vehicles. Analysis is performed in calibrating parameters and investigating different scenarios within the optimisation and agent-based simulation models. For this case study the system optimality is limited by the feasible number of tube trailer deliveries per day which suggests an opportunity for alternative delivery methods.
Review and Survey of Methods for Analysis of Impurities in Hydrogen for Fuel Cell Vehicles According to ISO 14687:2019
Feb 2021
Publication
Gaseous hydrogen for fuel cell electric vehicles must meet quality standards such as ISO 14687:2019 which contains maximal control thresholds for several impurities which could damage the fuel cells or the infrastructure. A review of analytical techniques for impurities analysis has already been carried out by Murugan et al. in 2014. Similarly this document intends to review the sampling of hydrogen and the available analytical methods together with a survey of laboratories performing the analysis of hydrogen about the techniques being used. Most impurities are addressed however some of them are challenging especially the halogenated compounds since only some halogenated compounds are covered not all of them. The analysis of impurities following ISO 14687:2019 remains expensive and complex enhancing the need for further research in this area. Novel and promising analyzers have been developed which need to be validated according to ISO 21087:2019 requirements.
Optimal Decarbonization Strategies for an Industrial Port Area by Using Hydrogen as Energy Carrier
Jul 2023
Publication
This article discusses possible strategies for decarbonizing the energy systems of an existing port. The approach consists in creating a complete superstructure that includes the use of renewable and fossil energy sources the import or local production of hydrogen vehicles and other equipment powered by Diesel electricity or hydrogen and the associated refuelling and storage units. Two substructures are then identified one including all these options the other considering also the addition of the energy demand of an adjacent steel industry. The goal is to select from each of these two substructures the most cost-effective configurations for 2030 and 2050 that meet the emission targets for those years under different cost scenarios for the energy sources and conversion/storage units obtained from the most reliable forecasts found in the literature. To this end the minimum total cost of all the energy conversion and storage units plus the associated infrastructures is sought by setting up a Mixed Integer Linear Programming optimization problem where integer variables handle the inclusion of the different generation and storage units and their activation in the operational phases. The comprehensive picture of possible solutions set allows identifying which options can most realistically be realized in the years to come in relation to the different assumed cost scenarios. Optimization results related to the scenario projected to 2030 indicate the key role played by Diesel hybrid and electric systems while considering the most stringent or much more stringent scenarios for emissions in 2050 almost all vehicles energy demand and industry hydrogen demand is met by hydrogen imported as ammonia by ship.
No more items...