Publications

The necessity of neutralizing the increase of the temperature of the atmosphere by the reduction of greenhouse gas emissions in particular carbon dioxide (CO2) as well as replacing fossil fuels leads to a necessary energy transition that is already happening. This energy transition requires the deployment of renewable energies that will replace gradually the fossil fuels. As the renewable energy share increases energy storage will become key to avoid curtailment or polluting back-up systems. This paper considers a chemical storage process based on the use of electricity to produce hydrogen by electrolysis of water. The obtained hydrogen (H2) can then be stored directly or further converted into methane (CH4 from methanation if CO2 is available e.g. from a carbon capture facility) methanol (CH3OH again if CO2 is available) and/or ammonia (NH3 by an electrochemical process). These different fuels can be stored in liquid or gaseous forms and therefore with different energy densities depending on their physical and chemical nature. This work aims at evaluating the energy and the economic costs of the production storage and transport of these different fuels derived from renewable electricity sources. This applied study on chemical storage underlines the advantages and disadvantages of each fuel in the frame of the energy transition.

Sudden releases of pressurised hydrogen may spontaneously ignite by the so-called “diffusion ignition” mechanism. Several experimental and numerical studies have been performed on spontaneous ignition for compressed hydrogen at ambient temperature. However there is no knowledge of the phenomenon for compressed hydrogen at cryogenic temperatures. The study aims to close this knowledge gap by performing numerical experiments using a computational fluid dynamics model validated previously against experiments at atmospheric temperatures to assess the effect of temperature decrease from ambient 300 K to cryogenic 80 K. The ignition dynamics is analysed for a T-shaped channel system. The cryo-compressed hydrogen is initially separated from the air in the T-shaped channel system by a burst disk (diaphragm). The inertia of the burst disk is accounted for in the simulations. The numerical experiments were carried out to determine the hydrogen storage pressure limit leading to spontaneous ignition in the configuration under investigation. It is found that the pressure limit for spontaneous ignition of the cryo-compressed hydrogen at temperature 80 K is 9.4 MPa. This is more than 3 times larger than pressure limit for spontaneous ignition of 2.9 MPa in the same setup at ambient temperature of 300 K.

In the context of green aviation as an internationally recognized solution hydrogen energy is lauded as the “ultimate energy source of the 21st century” with zero emissions at the source. Developed economies with aviation industries such as Europe and the United States have announced hydrogen energy aviation development plans successively. The study and development of high-energy hydrogen fuel cells and hydrogen energy power systems have become some of the future aviation research focal points. As a crucial component of hydrogen energy storage and delivery the design and development of a safe lightweight and efficient hydrogen storage structure have drawn increasing consideration. Using a hydrogen-powered Unmanned Aerial Vehicle (UAV) as the subject of this article the crash characteristics of the UAV’s hydrogen storage structure are investigated in detail. The main research findings are summarized as follows: (1) A series of crash characteristics analyses of the hydrogen storage structure of a hydrogen-powered UAV were conducted and the Finite Element Analysis (FEA) response of the structure under different impact angles internal pressures and impact speeds was obtained and analyzed. (2) When the deformation of the hydrogen storage structure exceeds 50 mm and the strain exceeds 0.8 an initial crack will appear at this part of the hydrogen storage structure. The emergency release valve should respond immediately to release the gas inside the tank to avoid further damage. (3) Impact angle and initial internal pressure are the main factors affecting the formation of initial cracks.

The promising development of hydrogen and fuel cell technologies has garnered increased attention in recent years assuming a significant role in industrial applications and the decarbonisation of the shipping industry. Given that the shipping industry generates considerable greenhouse gas emissions it is crucial and imperative to implement integrated solutions based on clean energy sources thereby meeting the proposed climate objectives. This study presents the standard hydrogen production storage and transport methods and analysis technologies that use hydrogen fuel cells in marine and industrial applications. Technologies based on hydrogen fuel cells and hybrid systems will have an increased perspective of application in industry and maritime transport under the conditions of optimising technological models developing the hydrogen industrial chain and updating standards and regulations in the field. However there are still many shortcomings. The paper’s main contribution is analysing the hydrogen industrial chain presenting the progress and obstacles associated with the technologies used in industrial and marine applications based on hydrogen energy.

Hydrogen energy plays an important role in the transformation of low-carbon energy and electric–hydrogen coupling will become a typical energy scenario. Aiming at the operation flexibility of a low-carbon electricity–hydrogen coupling system with high proportion of wind power and photovoltaic this work studies the flexibility margin of an electricity–hydrogen coupling energy block based on model predictive control. By analyzing the power exchange characteristics of heterogeneous energy the homogenization models of various heterogeneous energy sources are established. According to the analysis of power system flexibility margin three dimensions of flexibility margin evaluation indexes are defined from the dimension of system operation and an electricity–hydrogen coupling energy block scheduling model is established. The model predictive control algorithm is used to optimize the power balance operation of the electro–hydrogen coupling energy block and the flexibility margin of the energy block is quantitatively analyzed and calculated. Through the example analysis it is verified that the calculation method proposed in this article can not only realize the online power balance optimization of the electric–hydrogen coupling energy block but also effectively quantify the operation flexibility margin of the electric–hydrogen coupling energy block.

The RePowerEU plan [1] and the European Hydrogen Strategy [2] recognise the important role that the transport of hydrogen will play in enabling the penetration of renewable hydrogen in Europe. To implement the European Hydrogen Strategy it is important to understand whether the transport of hydrogen is cost effective or whether hydrogen should be produced where it is used. If transporting hydrogen makes sense a second open question is how long the transport route should be for the cost of the hydrogen to still be competitive with locally produced hydrogen. JRC has performed a comprehensive study regarding the transport of hydrogen. To investigate which renewable hydrogen delivery pathways are favourable in terms of energy demand and costs JRC has developed a database and an analytical tool to assess each step of the pathways and used it to assess two case studies. The study reveals that there is no single optimal hydrogen delivery solution across every transport scenario. The most cost effective way to deliver renewable hydrogen depends on distance amount final use and whether there is infrastructure already available. For distances compatible with the European territory compressed and liquefied hydrogen solutions and especially compressed hydrogen pipelines offer lower costs than chemical carriers do. The repurposing of existing natural gas pipelines for hydrogen use is expected to significantly lower the delivery cost making the pipeline option even more competitive in the future. By contrast chemical carriers become more competitive the longer the delivery distance (due to their lower transport costs) and open up import options from suppliers located for example in Chile or Australia.

The water-gas shift reaction (WGSR) is an intermediate reaction in hydrocarbon reforming processes considered one of the most important reactions for hydrogen production. Here water and carbon monoxide molecules react to generate hydrogen and carbon dioxide. From the thermodynamics aspect pressure does not have an impact whereas low-temperature conditions are suitable for high hydrogen selectivity because of the exothermic nature of the WGSR reaction. The performance of this reaction can be greatly enhanced in the presence of suitable catalysts. The WGSR has been widely studied due do the industrial significance resulting in a good volume of open literature on reactor design and catalyst development. A number of review articles are also available on the fundamental aspects of the reaction including thermodynamic analysis reaction condition optimization catalyst design and deactivation studies. Over the past few decades there has been an exceptional development of the catalyst characterization techniques such as near-ambient x-ray photoelectron spectroscopy (NA-XPS) and in situ transmission electron microscopy (in situ TEM) providing atomic level information in presence of gases at elevated temperatures. These tools have been crucial in providing nanoscale structural details and the dynamic changes during reaction conditions which were not available before. The present review is an attempt to gather the recent progress particularly in the past decade on the catalysts for low-temperature WGSR and their structural properties leading to new insights that can be used in the future for effective catalyst design. For the ease of reading the article is divided into subsections based on metals (noble and transition metal) oxide supports and carbon-based supports. It also aims at providing a brief overview of the reaction conditions by including a table of catalysts with synthesis methods reaction conditions and key observations for a quick reference. Based on our study of literature on noble metal catalysts atomic Pt substituted Mn3O4 shows almost full CO conversion at 260 °C itself with zero methane formation. In the case of transition metals group the inclusion of Cu in catalytic system seems to influence the CO conversion significantly and in some cases with CO conversion improvement by 65% at 280 °C. Moreover mesoporous ceria as a catalyst support shows great potential with reports of full CO conversion at a low temperature of 175 °C.

Aviation is the backbone of our modern society. In 2019 around 4.5 billion passengers travelled through the air. However at the same time aviation was also responsible for around 5% of anthropogenic causes of global warming. The impact of the COVID-19 pandemic on the aviation sector in the short term is clearly very high but the long-term effects are still unknown. However with the increase in global GDP the number of travelers is expected to increase between three- to four-fold by the middle of this century. While other sectors of transportation are making steady progress in decarbonizing aviation is falling behind. This paper explores some of the various options for energy carriers in aviation and particularly highlights the possibilities and challenges of using cryogenic fuels/energy carriers such as liquid hydrogen (LH2) and liquefied natural gas (LNG).

This article investigates the economic and environmental implications of implementing green ammonia production plants in Spain. To this end one business-as-usual scenario for gray ammonia production was compared with three green ammonia scenarios powered with different renewable energy sources (i.e. solar photovoltaic (PV) wind and a combination of solar PV and wind). The results illustrated that green ammonia scenarios reduced the environmental impacts in global warming stratospheric ozone depletion and fossil resource scarcity when compared with conventional gray ammonia scenario. Conversely green ammonia implementation increased the environmental impacts in the categories of land use mineral resource scarcity freshwater eutrophication and terrestrial acidification. The techno-economic analysis revealed that the conventional gray ammonia scenario featured lower costs than green ammonia scenarios when considering a moderate natural gas cost. However green ammonia implementation became the most economically favorable option when the natural gas cost and carbon prices increased. Finally the results showed that developing efficient ammonia-fueled systems is important to make green ammonia a relevant energy vector when considering the entire supply chain (production/transportation). Overall the results of this research demonstrate that green ammonia could play an important role in future decarbonization scenarios.

Hydrogen is one of the main alternative fuels with the greatest potential to replace fossil fuels due to its renewable and environmentally friendly nature. Due to this the present investigation aims to evaluate the combustion characteristics performance parameters emissions and variations in the characteristics of the lubricating oil. The investigation was conducted in a spark-ignition engine fueled by gasoline and hydrogen gas. Four engine load conditions (25% 50% 75% and 100%) and three hydrogen gas mass concentration conditions (3% 6% and 9%) were defined for the study. The investigation results allowed to demonstrate that the injection of hydrogen gas in the gasoline engine causes an increase of 3.2% and 4.0% in the maximum values of combustion pressure and heat release rates. Additionally hydrogen causes a 2.9% increase in engine BTE. Hydrogen's more efficient combustion process allowed for reducing CO HC and smoke opacity emissions. However hydrogen gas causes an additional increase of 14.5% and 30.4% in reducing the kinematic viscosity and the total base number of the lubricating oil. In addition there was evidence of an increase in the concentration of wear debris such as Fe and Cu which implies higher rates of wear in the engine's internal components.

The topic investigated in this article is a comparison contrast and integration effort of European strategies for sustainable development with the evolving market initiatives that are beginning to fuel the fourth industrial revolution. Several regulatory initiatives from continental bodies come into effect to radically change access to finances for business development based on sustainability goals and an analysis of the legislation and trends becomes essential for an effective pivot tactic in the face of adversity as well as change management policies to pre-emptively adapt and perform. The general research question is “what the strategic tools are best employed to overcome the hurdles laid forth by the drastic changes legally required for a sustainable future?” The research methods include a quantitative analysis of norms regulations and legislation including strategic initiatives circulated in the European Union governmental bodies integrated with qualitative research of the literature. The study finds and draws synergies between national strategies that have recently been drafted or are currently evolving with sustainability-centric initiatives such as the hydrogen initiative the nuclear initiative the natural gas initiative the renewables initiative the synthetics and biomass initiative the ESG initiative the digital initiative. The findings are to contribute to the business administration field by providing an appropriate image of the organizational design model in the sustainability era and a strategy framework to build the optimum long-term vision founded on continental regulatory initiatives that have come into effect.

Commonly used materials constituting the core components of polymer electrolyte membrane fuel cells (PEMFCs) including the balance‐of‐plant were classified according to the EU criticality methodology with an additional assessment of hazardousness and price. A life‐cycle assessment (LCA) of the materials potentially present in PEMFC systems was performed for 1  g of each material. To demonstrate the importance of appropriate actions at the end of life (EoL) for critical materials a LCA study of the whole life cycle for a 1‐kW PEMFC system and 20000 operating hours was performed. In addition to the manufacturing phase four different scenarios of hydrogen production were analyzed. In the EoL phase recycling was used as a primary strategy with energy extraction and landfill as the second and third. The environmental impacts for 1 g of material show that platinum group metals and precious metals have by far the largest environmental impact; therefore it is necessary to pay special attention to these materials in the EoL phase. The LCA results for the 1‐kW PEMFC system show that in the manufacturing phase the major environmental impacts come from the fuel cell stack where the majority of the critical materials are used. Analysis shows that only 0.75 g of platinum in the manufacturing phase contributes on average 60% of the total environmental impacts of the manufacturing phase. In the operating phase environmentally sounder scenarios are the hydrogen production with water electrolysis using hydroelectricity and natural gas reforming. These two scenarios have lower absolute values for the environmental impact indicators on average compared with the manufacturing phase of the 1‐kW PEMFC system. With proper recycling strategies in the EoL phase for each material and by paying a lot of attention to the critical materials the environmental impacts could be reduced on average by 37.3% for the manufacturing phase and 23.7% for the entire life cycle of the 1‐kW PEMFC system.

This report analyses five case study reports in-depth across five EU countries as part of a broader analytical and critical exercise. This analytical work seeks to contribute to the development of new models for regional and local authorities aiming to boost support for Green Transition of their economies through smarter innovation policies using the smart specialisation (S3) approach. The work covered five regions from across the European Union representing a diversity of approaches to using S3 for Green Transition: the Basque Country in Spain the Centro region in Portugal the region of East and North Finland the region of Western Macedonia in Greece and the region of West Netherlands. The case studies included in this report consists of three sections on (i) Profile of the region and key development challenges; (ii) Innovation strategies and policies for green transition: incorporating societal challenges; (iii) Understanding and monitoring innovationled green transition. Drawing together the different elements presented the conclusion provides a summary overview of the case and the authors’ opinion on it.

Green hydrogen is considered a highly promising vector for deep decarbonisation of energy systems and is forecast to represent 20% of global energy use by 2050. In order to secure access to this resource Japan Germany and South Korea have announced plans to import hydrogen; other major energy consumers are sure to follow. Ammonia a promising hydrogen derivative may enable this energy transport by densifying hydrogen at relatively low cost using well-understood technologies. This review seeks to describe a global green ammonia import/export market: it identifies benefits and limitations of ammonia relative to other hydrogen carriers the costs of ammonia production and transport and the constraints on both supply and demand. We find that green ammonia as an energy vector is likely to be critical to future energy systems but that gaps remain in the literature. In particular rigorous analysis of production and transport costs are rarely paired preventing realistic assessments of the delivered cost of energy or the selection of optimum import/export partners to minimise the delivered cost of ammonia. Filling these gaps in the literature is a prerequisite to the development of robust hydrogen and ammonia strategies and to enable the formation of global import and export markets of green fuel

In this paper we will explore the state of play with renewable hydrogen development in Africa through some case studies from AGHA members and the scope for growth moving forward. In so doing we will address some of the prevailing challenges to build out of a clean hydrogen economy that could be foreseen already at this early stage and look for potential solutions building on what is already in place in other sectors. We make the case that there should be four key areas of focus moving forward on African-EU hydrogen collaboration. Firstly (i) foreign direct investment (FDI) should be de-risked through offtake mechanisms and public-private partnerships (ii) flagship projects should lead the way (iii) large parts of the value chain should remain in Africa (iv) wider ‘democratisation’ and accessibility of the sector should be encouraged

In 2020 the European Commission launched a hydrogen strategy for a climate-neutral Europe setting out the conditions and actions for mainstreaming clean hydrogen along with targets for installing renewable hydrogen electrolysers by 2024 and 2030. Blending hydrogen alongside other gases into the existing gas grid is considered a possible interim first step towards decarbonising natural gas. In the present analysis we modelled electrolytic hydrogen generation as a process connecting two separate energy systems (power and gas). The analysis is based on a projection of the European power and gas systems to 2030 based on the EUCO3232.5 scenario. Multiple market configurations were introduced in order to assess the interplay between diverse power market arrangements and constraints imposed by the upper bound on hydrogen concentration. The study identifies the maximum electrolyser capacity that could be integrated in the power and gas systems the impact on greenhouse gas emissions and the level of price support that may be required for a broad range of electrolyser configurations. The study further attempts to shed some light on the potential side effects of having non-harmonised H2 blending thresholds between neighbouring Member States.

Hydrogen is a promising fuel to decarbonize aviation but macroeconomic studies are currently missing. Computable general equilibrium (CGE) models are suitable to conduct macroeconomic analyses and are frequently employed in hydrogen and aviation research. The main objective of this paper is to investigate existing CGE studies related to (a) hydrogen and (b) aviation to derive a macroeconomic research agenda for hydrogen-powered aviation. Therefore the well-established method of systematic literature review is conducted. First we provide an overview of 18 hydrogen-related and 27 aviation-related CGE studies and analyze the literature with respect to appropriate categories. Second we highlight key insights and identify research gaps for both the hydrogen and aviation-related CGE literature. Our findings comprise inter alia hydrogen’s current lack of cost competitiveness and the macroeconomic relevance of air transportation. Research gaps include among others a stronger focus on sustainable hydrogen and a more holistic perspective on the air transportation system. Third we derive implications for macroeconomic research on hydrogen-powered aviation including (I) the consideration of existing modeling approaches (II) the utilization of interdisciplinary data and scenarios (III) geographical suitability (IV) the application of diverse policy tools and (V) a holistic perspective. Our work contributes a meaningful foundation for macroeconomic studies on hydrogen-powered aviation. Moreover we recommend policymakers to address the macroeconomic perspectives of hydrogen use in air transportation.

The modelling underpinning the scenarios for the EU long-term strategy did not include hydrogen trade. The assumption was that each Member State (MS) supplies its own needs for hydrogen and synthetic fuels. The goal of this study is to develop a model to undertake optimal geolocation of hydrogen production between MS including the possibility to trade hydrogen and therefore use the RES potential more optimally and decrease energy system costs at EU level. Specifically the new model helps to identify the geo-location of: 1. Renewable energy production (PV wind biomass hydro) 2. Location of RES and hydrogen production facilities 3. Storage infrastructure also for natural gas and storage technologies i.e. batteries pumping etc. 4. Infrastructure by road and pipeline

The goal of achieving water electrolysis on a gigawatt scale faces numerous challenges regarding technological feasibility and market application. Here the flexibility of operation scenarios such as load changes and capacity of electrolysis plays a key role. This raises the question of how flexible electrolysis systems currently are and what possibilities there are to increase flexibility. In order to be able to answer this question in the following a systematic literature research was carried out with the aim to show the current technical possibilities to adapt load and capacity of electrolysis technologies and to determine limits. The result of the systematic literature research is an overview matrix of the electrolysis types AEL PEMEL HTEL and AEMEL already applied in the market. Technical data on the operation of the respective electrolysis stacks as well as details and materials for the respective stack structure (cathode anode electrolyte) were summarized. The flexibility of the individual technologies is addressed by expressing it in values such as load flexibility and startup-times. The overview matrix contains values from various sour1ces in order to make electrolysis comparable at the stack level and to be able to make statements about flexibility. The result of the overview article shows the still open need for research and development to make electrolysis more flexible.

Steel production is a carbon and energy intensive activity releasing 1.9 tons of CO2 and requiring 5.17 MWh of primary energy per ton produced on average globally resulting in 9% of all anthropogenic CO2 emissions. To achieve the goals of the Paris Agreement of limiting global temperature increase to below 1.5 °C compared to pre-industrial levels the structure of the global steel production must change fundamentally. There are several technological paths towards a lower carbon intensity for steelmaking which bring with them a paradigm shift decoupling CO2 emissions from crude steel production by transitioning from traditional methods of steel production using fossil coal and fossil methane to those based on low-cost renewable electricity and green hydrogen. However the energy system consequences of fully defossilised steelmaking has not yet been examined in detail. This research examines the energy system requirements a global defossilised power-to-steel industry using a GDP-based demand model for global steel demands which projects a growth in steel demand from 1.6 Gt in 2020 to 2.4 Gt in 2100. Three scenarios are developed to investigate the emissions trajectory energy demands and economics of a high penetration of direct hydrogen reduction and electrowinning in global steel production. Results indicate that the global steel industry will see green hydrogen demands grow significantly ranging from 2809 to 4371 TWhH2 by 2050. Under the studied conditions global steel production is projected to see reductions in final thermal energy demand of between 38.3% and 57.7% and increases in total electricity demand by factors between 15.1 and 13.3 by 2050 depending on the scenario. Furthermore CO2 emissions from steelmaking can be reduced to zero.

Since ammonia and liquid hydrogen are the optional future shipping cargo and fuels the applicability was crucial using the current technologies and expectations. Existing studies for the economic feasibility of the energies had limitations: empirical evaluation with assumptions and insufficiency related to causality. A distorted estimation can result in failure of decision-making or policy in terms of future energy. The present study aimed to evaluate the transportation costs of future energy including ammonia and liquid hydrogen in comparison to LNG for overcoming the limitations. An integrated mathematical model was applied to the investigation for economic feasibility. The transportation costs of the chosen energies were evaluated for the given transportation plan considering key factors: ship speed BOR and transportation plan. The transportation costs at the design speed for LNG and liquid hydrogen were approximately 55 % and 80 % of that for ammonia without considering the social cost due to CO2 emission. Although ammonia was the most expensive energy for transportation ammonia could be an effective alternative due to insensitivity to the transportation plan. If the social cost was taken into account liquid hydrogen already gained competitiveness in comparison to LNG. The advantage of liquid hydrogen was maximized for higher speed where more BOG was injected into main engines.

Britain’s Hydrogen Blending Delivery Plan which sets out how all five of Britain’s gas grid companies will meet the Government’s target for Britain’s network of gas pipes to be ready to deliver 20% hydrogen to homes and businesses from 2023 as a replacement for natural gas.

Renewable energy DC hydrogen production has become a new development trend. Due to the interaction between the weak damping of DC network and the negative impedance characteristics of power supply of hydrogen production the actual available power of renewable and hydrogen energy DC interconnection system will be lower than its rated setting value. To solve this problem this paper proposes an intelligent damping control to realize the rated power operation of hydrogen generation power source and significantly improve the hydrogen generation performance. In this paper the nonlinear model under typical control strategies is established in order to adapt to different degrees of disturbance and the damping controller is designed based on state feedback including feedback control law and damping generation formula. On this basis an intelligent method of damping control is proposed to support rapid decision-making. Finally the intelligent damping control method is verified by simulation analysis. It realizes rated power of power supply of hydrogen production by generating only a small amount of damping power and superimposing it on the hydrogen production power

Globally iron and steel production is responsible for approximately 6.3% of global man-made carbon dioxide emissions because coal is used as both the combustion fuel and chemical reductant. Hydrogen reduction of iron ore offers a potential alternative ‘near-zero-CO2’ route if renewable electrical power is used for both hydrogen electrolysis and reactor heating. This paper discusses key technoeconomic considerations for establishing a hydrogen direct reduced iron (H2-DRI) plant in New Zealand. The location and availability of firm renewable electricity generation is described the experimental feasibility of reducing locally-sourced titanomagnetite irons and in hydrogen is shown and a high-level process flow diagram for a counter-flow electrically heated H2-DRI process is developed. The minimum hydrogen composition of the reactor off-gas is 46% necessitating the inclusion of a hydrogen recycle loop to maximise chemical utilisation of hydrogen and minimize costs. A total electrical energy requirement of 3.24 MWh per tonne of H2-DRI is obtained for the base-case process considered here. Overall a maximum input electricity cost of no more than US$80 per MWh at the plant is required to be cost-competitive with existing carbothermic DRI processes. Production cost savings could be achieved through realistic future improvements in electrolyser efficiency (∼ US$5 per tonne of H2-DRI) and heat exchanger (∼US$3 per tonne). We conclude that commercial H2-DRI production in New Zealand is entirely feasible but will ultimately depend upon the price paid for firm electrical power at the plant.

This paper aims to analyse two energy storage methods—batteries and hydrogen storage technologies—that in some cases are treated as complementary technologies but in other ones they are considered opposed technologies. A detailed technical description of each technology will allow to understand the evolution of batteries and hydrogen storage technologies: batteries looking for higher energy capacity and lower maintenance while hydrogen storage technologies pursuing better volumetric and gravimetric densities. Additionally as energy storage systems a mathematical model is required to know the state of charge of the system. For this purpose a mathematical model is proposed for conventional batteries for compressed hydrogen tanks for liquid hydrogen storage and for metal hydride tanks which makes it possible to integrate energy storage systems into management strategies that aim to solve the energy balance in plants based on hybrid energy storage systems. From the technical point of view most batteries are easier to operate and do not require special operating conditions while hydrogen storage methods are currently functioning at the two extremes (high temperatures for metal and complex hydrides and low temperatures for liquid hydrogen or physisorption). Additionally the technical comparison made in this paper also includes research trends and future possibilities in an attempt to help plan future policies.

The European Commission recently proposed requirements for the production of renewable fuels as these are required to decarbonize the hard-to-electrify parts of the industrial and heavy transport sectors. Power-to-X (P2X) energy hubs enable efficient synergies between energy infrastructures production facilities and storage options. In this study we explore the optimal operation of an energy hub by leveraging the flexibility of P2X including hydrogen methanol and ammonia synthesizers by analyzing potential revenue streams such as the day-ahead and ancillary services markets. We propose EnerHub2X a mixed-integer linear program that maximizes the hub’s profit based on current market prices considering the technical constraints of P2X such as unit commitment and non-linear efficiencies. We investigate a representative Danish energy hub and find that without price incentives it mainly sells renewable electricity and produces compressed hydrogen. A sufficient amount of renewable ammonia and methanol is only produced by adding a price premium of about 50% (0.16 e/kg) to the conventional fuel prices. To utilize production efficiently on-site renewable energy sources and P2X must be carefully aligned. We show that renewable power purchase agreements can provide flexibility while complying with the rules set by the European Commission.

Among the numerous envisioned applications for hydrogen in the decarbonization of the energy system seasonal energy storage is usually regarded as one of the most likely options. Although long-term energy storage is usually considered at grid-scale level given the increasing diffusion of distributed energy systems and the expected cost reduction in hydrogen related components some companies are starting to offer residential systems with PV modules and batteries that rely on hydrogen for seasonal storage of electrical energy. Such hydrogen storage systems are generally composed by water electrolysers hydrogen storage vessels and fuel cells.<br/>The aim of this work is to investigate such systems and their possible applications for different geographical conditions in Italy. On-grid and off-grid systems are considered and compared to systems without hydrogen in terms of self-consumption ratio size of components and economic investment. Each different option has been assessed from a techno-economic point of view via MESS (Multi Energy Systems Simulator) an analytical programming tool for the analysis of local energy systems.<br/>Results have identified the optimal sizing of the system's components and have shown how such systems are not in general economically competitive for a single dwelling although they can in some cases ensure energy independence.

The present research work deals with prediction of hydrogen consumption of a fuel cell in an energy storage system. Due to the fact that these kind of systems have a very nonlinear behaviour the use of traditional techniques based on parametric models and other more sophisticated techniques such as soft computing methods seems not to be accurate enough to generate good models of the system under study. Due to that a hybrid intelligent system based on clustering and regression techniques has been developed and implemented to predict the necessary variation of the hydrogen flow consumption to satisfy the variation of demanded power to the fuel cell. In this research a hybrid intelligent model was created and validated over a dataset from a fuel cell energy storage system. Obtained results validate the proposal achieving better performance than other well-known classical regression methods allowing us to predict the hydrogen consumption with a Mean Absolute Error (MAE) of 3.73 with the validation dataset.

A Lagrangian-based one-dimensional approach has been developed using Cantera to study the dynamics of spherically expanding flames. The detailed reaction model USC-Mech II has been employed to examine flame propagating in hydrogen-air mixtures. In the first part our approach has been validated against laminar flame speed and Markstein number data from the literature. It was shown that the laminar flame speed was predicted within 5% on average but that discrepancies were observed for the Markstein number especially for rich mixtures. In the second part a detailed analysis of the thermo-chemical dynamics along the path of Lagrangian particles propagating in stretched flames was performed. For mixtures with negative Markstein lengths it was found that at high stretch rates the mixture entering the reaction-dominated period is less lean with respect to the initial mixture than at low stretch rate. This induces a faster rate of chemical heat release and of active radical production which results in a higher flame propagation speed. Opposite effects were observed for mixtures with positive Markstein lengths for which slower flame propagation was observed at high stretch rates compared to low stretch rates."

In order to wrap Season 3 of EAH appropriately we are honored to have our most popular EAH guest back with us Alicia Eastman President and Co-Founder of Intercontinental Energy is here to help us review the big hydrogen happenings of 2022 and preview some of the most important predictions and expectations for the sector coming for 2023.

The podcast can be found on their website.

There is increasing interest in migrating to a carbon-neutral power system that relies on renewable energy due to concerns about greenhouse gas emissions energy shortages and global warming. However the increasing share of renewable energy has added volatility and uncertainty to power system operations. Introducing new devices and using flexible resources may help solve the problem but expanding the domain of the problem can be another solution. Sector coupling which integrates production consumption conversion and storage by connecting various energy domains could potentially meet the needs of each energy sector. It can also reduce the generation of surplus energy and unnecessary carbon emissions. As a result sector coupling an integrated energy system increases the acceptance of renewable energy in the traditional power system and makes it carbon neutral. However difficulties in large-scale integration low conversion efficiency and economic feasibility remain obstacles. This perspective paper discusses the background definition and components of sector coupling as well as its functions and examples in rendering power systems carbon-neutral. The current limitations and outlook of sector coupling are also examined.

Fossil resources are unevenly distributed on the earth and are finite primary energy which is widely used in the fields of industry transportation and power generation etc.<br/>Primary energies that can replace fossil resources include renewable energy and nuclear energy. Hydrogen has the potential to be secondary energy that can be widely used in industry for various purposes. Nuclear energy can be used for producing hydrogen; it is becoming more important to convert this primary energies into hydrogen. This paper describes the roles of nuclear energy as a primary energy in hydrogen production from the viewpoint of the basics of energy form conversion.

Decarbonising economies and improving environment can be enhanced through circular economy energy and environmental systems integrating electricity water and gas utilities. Hydrogen production can facilitate intermittent renewable electricity through reduced curtailment of electricity in periods of over production. Positioning an electrolyser at a wastewater treatment plant with existing sludge digesters offers significant advantages over stand-alone facilities. This paper proposes co-locating electrolysis and biological methanation technologies at a wastewater treatment plant. Electrolysis can produce oxygen for use in pure or enhanced oxygen aeration offering a 40% reduction in emissions and power demand at the treatment facility. The hydrogen may be used in a novel biological methanation system upgrading carbon dioxide (CO2)in biogas from sludge digestion yielding a 54% increase in biomethane production. A 10MW electrolyser operating at 80% capacity would be capable of supplying the oxygen demand for a 426400 population equivalent wastewater treatment plant producing 8500 tDS/a of sludge. Digesting the sludge could generate 1409000 m 3 CH4/a and 776000 m 3 CO2/a. Upgrading the CO2 to methane would consume 22.2% of the electrolyser generated hydrogen and capture 1.534 ktCO2e/a. Hydrogen and methane are viable advanced transport fuels that can be utilised in decarbonising heavy transport. In the proposed circular economy energy and environment system sufficient fuel would be generated annually for 94 compressed biomethane gas (CBG) heavy goods vehicles (HGV) and 296 compressed hydrogen gas fuel cell (CHG) HGVs. Replacement of the equivalent number of diesel HGVs would offset approximately 16.1 ktCO2e/a.

The integrated energy system with electric vehicles can realize multi-energy coordination and complementarity and effectively promote the realization of low-carbon environmental protection goals. However the temporary change of vehicle travel plan will have an adverse impact on the system. Therefore a multi-layer coordinated optimization strategy of electric-thermal-hydrogen integrated energy system including vehicle to grid (V2G) load feedback correction is proposed. The strategy is based on the coordination of threelevel optimization. The electric vehicle charging and discharging management layer comprehensively considers the variance of load curve and the dissatisfaction of vehicle owners and the charging and discharging plan is obtained through multi-objective improved sparrow search algorithm which is transferred to the model predictive control rolling optimization layer. In the rolling optimization process according to the actual situation selectively enter the V2G load feedback correction layer to update V2G load so as to eliminate the impact of temporary changes in electric vehicle travel plans. Simulation results show that the total operating cost with feedback correction is 4.19% lower than that without feedback correction and tracking situation of tie-line planned value is improved which verifies the proposed strategy.

Water electrolysis is a process which converts electricity into hydrogen and is seen as a key technology in enabling a net-zero compatible energy system. It will enable the scale-up of renewable electricity as a primary energy source for heating transport and industry. However displacing the role currently met by fossil fuels might require a price of hydrogen as low as 1 $/kg whereas renewable hydrogen produced using electrolysis is currently 10 $/kg. This article explores how mass manufacturing of proton exchange membrane (PEM) electrolysers can reduce the capital cost and thus make the production of renewable power to hydrogen gas (PtG) more economically viable. A bottom up direct manufacturing model was developed to determine how economies of scale can reduce the capital cost of electrolysis. The results demonstrated that (assuming an annual production rate of 5000 units of 200 kW PEM electrolysis systems) the capital cost of a PEM electrolysis system can reduce from 1990 $/kW to 590 $/kW based on current technology and then on to 431 $/kW and 300 $/kW based on the an installed capacity scale-up of ten- and one-hundred-fold respectively. A life-cycle costing analysis was then completed to determine the importance of the capital cost of an electrolysis system to the price of hydrogen. It was observed that based on current technology mass manufacturing has a large impact on the price of hydrogen reducing it from 6.40 $/kg (at 10 units units per year) to 4.16 $/kg (at 5000 units per year). Further analysis was undertaken to determine the cost at different installed capacities and found that the cost could reduce further to 2.63 $/kg and 1.37 $/kg based on technology scale-up by ten- and one hundred-fold respectively. Based on the 2030 (and beyond) baseline assumptions it is expected that hydrogen production from PEM electrolysis could be used as an industrial process feed stock provide power and heat to buildings and as a fuel for heavy good vehicles (HGVs). In the cases of retrofitted gas networks for residential or industrial heating solutions or for long distance transport it represents a more economically attractive and mass-scale compatible solution when compared to electrified heating or transport solutions.

To abate climate change and ameliorate the air quality in urban areas innovative solutions are required to reduce CO2 and pollutant emissions from traffic. Alternative fuels made from biomass or CO2 and hydrogen can contribute to these goals by substituting fossil gasoline or diesel in combustion engines. Using a conjoint analysis approach the current study investigates preferences of laypeople (n = 303) for fuel production facilities in terms of siting location plant size raw material used in the production and raw material transport. The location was most decision-relevant followed by raw material transport whereas plant size and type of raw material played a less prominent role for the preference choice. The best-case scenario from the point of view of acceptance would be the installation of a rather small bio-hybrid fuel production plant in an industrial area (instead of an agricultural or pristine environment). No transport or transport via underground pipeline were preferred over truck/tank car or overground pipeline. The findings can be used as a basis for planning and decision-making for designing production networks for new fuel types.

Hydrogen direct reduction has been proposed as a means to decarbonize primary steelmaking. Preferably the hydrogen necessary for this process is produced via water electrolysis. A downside to electrolysis is the large electricity demand. The electricity cost of water electrolysis may be reduced by using a hydrogen storage to exploit variations in electricity price i.e. producing more hydrogen when the electricity price is low and vice versa. In this paper we compare two kinds of hydrogen storages in the context of a hydrogen direct reduction process via simulations based on historic Swedish electricity prices: the storage of gaseous hydrogen in an underground lined rock cavern and the storage of hydrogen chemically bound in methanol. We find the methanol-based storages to be economically advantageous to lined rock caverns in several scenarios. The main advantages of methanol-based storage are the low investment cost of storage capacity and the possibility to decouple storage capacity from rate capacity. Nevertheless no storage option is found to be profitable for historic Swedish electricity prices. For the storages to be profitable electricity prices must be volatile with relatively frequent high peaks which has happened rarely in Sweden in recent years. However such scenarios may become more common with the expected increase of intermittent renewable power in the Swedish electricity system.

This paper presents the application of a multidisciplinary approach for the preliminary design and evaluation of the potential improvements in performance and environmental impact through the utilization of compressed (CGH2) and liquefied (LH2) hydrogen fuel for a civil tilt-rotor modelled after the NASA XV-15. The methodology deployed comprises models for rotorcraft flight dynamics engine performance flight path analysis hydrogen tank and thermal management system sizing. Trade-offs between gravimetric efficiency energy consumption fuel burn CO2 emissions and cost are quantified and compared to the kerosene-fuelled rotorcraft. The analysis carried out suggests that for these vehicle scales gravimetric efficiencies of the order of 13% and 30% can be attained for compressed and liquid hydrogen storage respectively leading to reduced range capability relative to the baseline tilt-rotor by at least 40%. At mission level it is shown that the hydrogen-fuelled configurations result in increased energy consumption by at least 12% (LH2) and 5% (CGH2) but at the same time significantly reduced life-cycle carbon emissions compared to the kerosene counterpart. Although LH2 storage at cryogenic conditions has a higher gravimetric efficiency than CGH2 (at 700 bar) it is shown that for this class of rotorcraft the latter is more energy efficient when the thermal management system for fuel pressurization and heating prior to combustion is accounted for.

Political decarbonisation commitments and outcompeting renewable electricity costs are disrupting energy systems. This foresight study prepares stakeholders for this dynamic reactive change by examining visions that constitute a probable plausible and possible component of future energy systems. Visions were extrapolated through an expert review of energy technologies and Australian case studies. ‘Probable–Abundant’ envisages a high penetration of solar and wind with increased value of balancing services: batteries pumped hydro and transmission. This vision is exemplified by the South Australian grid where variable and distributed sources lead generation. ‘Plausible–Traded’ envisages power and power fuel exports given hydrogen and high-voltage direct-current transmission advances reflected by public and private sector plans to leverage rich natural resources for national and intercontinental exchanges. ‘Possible–Zero’ envisages the application of carbon removal and nuclear technologies in response to the escalating challenge of deep decarbonisation. The Australian critical minerals strategy signals adaptations of high-emission industries to shifting energy resource values. These visions contribute a flexible accessible framework for diverse stakeholders to discuss uncertain energy systems changes and consider issues from new perspectives. Appraisal of preferred futures allows stakeholders to recognise observed changes as positive or negative and may lead to new planning aspirations.

Today in the field of energy the main goal is to reduce emissions with 7 the aim of maintaining a clean environment. To reduce energy consumption 8 from fossil fuels new tools for micro-grids have been proposed. In the context 9 of multi-vector energy management systems the present work proposes an 10 optimal scheduler based on genetic algorithms to manage flexible assets in the 11 energy system such as energy storage and manageable demand. This tool is 12 applied to a case study for a Spanish technology park (360 kW consumption 13 peak) with photovoltaic and wind generation (735 kW generation peak) 14 hydrogen production (15 kW) and electric and fuel cell charging stations. 15 It provides an hourly day-ahead scheduling for the existing flexible assets: 16 the electrolyser the electric vehicle charging station the hydrogen refuelling 17 station and the heating ventilation and air conditioning system in one 18 building of the park. 19 A set of experiments is carried out over a period of 14 days using real 20 data and performing computations in real time in order to test and validate 21 the tool. The analysis of results show that the solution maximises the use of 22 local renewable energy production (demand is shifted to those hours when 23 there is a surplus of generation) which means a reduction in energy costs 24 whereas the computational cost allows the implementation of the tool in real 25 time.

Autoignition risk in initially non-premixed flowing systems such as premixing ducts must be assessed to help the development of low-NOx systems and hydrogen combustors. Such situations may involve randomly fluctuating inlet conditions that are challenging to model in conventional mixture-fraction-based approaches. A Computational Fluid Dynamics (CFD)-based surrogate modelling strategy is presented here for fast and accurate predictions of the stochastic autoignition behaviour of a hydrogen flow in a hot air turbulent co-flow. The variability of three input parameters i.e. inlet fuel and air temperatures and average wall temperature is first sampled via a space-filling design. For each sampled set of conditions the CFD modelling of the flame is performed via the Incompletely Stirred Reactor Network (ISRN) approach which solves the reacting flow governing equations in post-processing on top of a Large Eddy Simulation (LES) of the inert hydrogen plume. An accurate surrogate model namely a Gaussian Process is then trained on the ISRN simulations of the burner and the final quantification of the variability of autoignition locations is achieved by querying the surrogate model via Monte Carlo sampling of the random input quantities. The results are in agreement with the observed statistics of the autoignition locations. The methodology adopted in this work can be used effectively to quantify the impact of fluctuations and assist the design of practical combustion systems. © 2022 The Authors. Published by Elsevier Inc. on behalf of The Combustion Institute.

: In the last decade with the increased concerns about the global environment attempts have been made to promote the replacement of fossil fuels with sustainable sources. For transport which accounts for around a quarter of total greenhouse gas emissions meeting climate neutrality goals will require replacing existing fleets with electric or hydrogen-propelled vehicles. However the lack of adequate decision support approach makes the introduction of new propulsion technologies in the transportation sector a complex strategic decision problem where distorted non-optimal decisions may easily result in long-term negative effects on the performance of logistic operators. This research addresses the problem of transport fleet renewal by proposing a multi-criteria decision-making approach and takes into account the multiple propulsion technologies currently available and the objectives of the EU Green Deal as well as the inherent scenario uncertainty. The proposed approach based on the TOPSIS model involves a novel decision framework referred to as a generalized life cycle evaluation of the environmental and cost objectives which is necessary when comparing green and traditional propulsion systems in a long-term perspective to avoid distorted decisions. Since the objective of the study is to provide a practical methodology to support strategic decisions the framework proposed has been validated against a practical case referred to the strategic fleet renewal decision process. The results obtained demonstrate how the decision maker’s perception of the technological evolution of the propulsion technologies influences the decision process thus leading to different optimal choices.

The ‘deep’ decarbonization of the residential sector is a priority for meeting national climate change targets especially in countries such as the UK where natural gas has been the dominant fuel source for over half a century. Hydrogen blending and repurposing the national grid to supply low-carbon hydrogen gas may offer respective short- and long-term solutions to achieving emissions reduction across parts of the housing sector. Despite this imperative the social acceptance of domestic hydrogen energy technologies remains underexplored by sustainability scholars with limited insights regarding consumer perceptions and expectations of the transition. A knowledge deficit of this magnitude is likely to hinder effective policymaking and may result in sub-optimal rollout strategies that derail the trajectory of the net zero agenda. Addressing this knowledge gap this study develops a conceptual framework for examining the consumer-facing side of the hydrogen transition. The paper affirms that the spatiotemporal patterns of renewable energy adoption are shaped by a range of interacting scales dimensions and factors. The UK’s emerging hydrogen landscape and its actor-network is characterized as a heterogenous system composed of dynamic relationships and interdependencies. Future studies should engage with domestic hydrogen acceptance as a co-evolving multi-scalar phenomenon rooted in the interplay of five distinct dimensions: attitudinal socio-political community market and behavioral acceptance. If arrived to behavioral acceptance helps realize the domestication of hydrogen heating and cooking established on grounds on cognitive sociopolitical and sociocultural legitimacy. The research community should internalize the complexity and richness of consumer attitudes and responses through a more critical and reflexive approach to the study of social acceptance.

The installed capacity electricity generation from wind and the curtailment of wind power in the UK between 2011 and 2021 showed that penetration levels of wind energy and the amount of energy that is curtailed in future would continue to rise whereas the curtailed energy could be utilised to produce green hydrogen. In this study data were collected technologies were chosen systems were designed and simulation models were developed to determine technical requirements and levelised costs of hydrogen produced and transported through different pathways. The analysis of capital and operating costs of the main components used for onshore and offshore green hydrogen production using offshore wind including alternative strategies for hydrogen storage and transport and hydrogen carriers showed that a significant reduction in cost could be achieved by 2030 enabling the production of green hydrogen from offshore wind at a competitive cost compared to grey and blue hydrogen. Among all scenarios investigated in this study compressed hydrogen produced offshore is the most cost-effective scenario for projects starting in 2025 although the economic feasibility of this scenario is strongly affected by the storage period and the distance to the shore of the offshore wind farm. Alternative scenarios for hydrogen storage and transport such as liquefied hydrogen and methylcyclohexane could become more cost-effective for projects starting in 2050 when the levelised cost of hydrogen could reach values of about £2 per kilogram of hydrogen or lower.

Hydrogen is regarded as a promising fuel in the transition to clean energy. Nevertheless as the demand for hydrogen increases some microgrids equipped with P2H (MGH) will encounter the issue of primary energy deficiency. Meanwhile some microgrids (MGs) face the difficulty of being unable to consume surplus energy locally. Hence we interconnect MGs with different energy characteristics and then establish a collaborative scheduling model of multi-microgrids (MMGs). In this model a federated demand response (FDR) program considering predictive mean voting is designed to coordinate controllable loads of electricity heat and hydrogen in different MGs. With the coordination of FDR the users’ satisfaction and comfort in each MG are kept within an acceptable range. To further adapt to an actual working condition of the microturbine (MT) in MGH a power interaction method is proposed to maintain the operating power of the MT at the optimum load level and shave peak and shorten the operating periods of MT. In the solution process the sequence operation theory is utilized to deal with the probability density of renewable energy. A series of case studies on a test system of MMG demonstrate the effectiveness of the proposed method.

This study proposes a multi-level model predictive control (MPC) for a grid-connected wind farm paired to a hydrogen-based storage system (HESS) to produce hydrogen as a fuel for commercial road vehicles while meeting electric and contractual loads at the same time. In particular the integrated system (wind farm + HESS) should comply with the “fuel production” use case as per the IEA-HIA report where the hydrogen production for fuel cell electric vehicles (FCEVs) has the highest unconditional priority among all the objectives. Based on models adopting mixed-integer constraints and dynamics the problem of external hydrogen consumer requests optimal load demand tracking and electricity market participation is solved at different timescales to achieve a long-term plan based on forecasts that then are adjusted at real-time. The developed controller will be deployed onto the management platform of the HESS which is paired to a wind farm established in North Norway within the EU funded project HAEOLUS. Numerical analysis shows that the proposed controller efficiently manages the integrated system and commits the equipment so as to comply with the requirements of the addressed scenario. The operating costs of the devices are reduced by 5% which corresponds to roughly 300 commutations saved per year for devices.

This paper presents a day-ahead economic optimization scheduling model for Regional Electricity–Hydrogen Integrated Energy System (REHIES) with high penetration of renewable energies. The electricity–hydrogen coupling devices are modelled with energy storage units and Insensitive Electrical Load (ISEL). The proposed objective function is able to capture the maximum benefits for REHIES in terms of economic benefits and can be summarized as a Quadratic Programming (QP) problem. The simulation verification is performed by MATLAB/CPLEX solver. The simulation results show that the proposed optimization model adapts the market requirement by contributing flexible collaboration between electricity and hydrogen. Also the translational properties of ISEL can implement higher economic profits and more effective utilization of renewable energy.

Hydrogen will be a central cross-sectoral energy carrier in the decarbonization of the European energy system. This paper investigates how a large-scale deployment of green hydrogen production affects the investments in transmission and generation towards 2060 analyzes the North Sea area with the main offshore wind projects and assesses the development of an offshore energy hub. Results indicate that the hydrogen deployment has a tremendous impact on the grid development in Europe and in the North Sea. Findings indicate that total power generation capacity increases around 50%. The offshore energy hub acts mainly as a power transmission asset leads to a reduction in total generation capacity and is central to unlock the offshore wind potential in the North Sea. The effect of hydrogen deployment on power prices is multifaceted. In regions where power prices have typically been lower than elsewhere in Europe it is observed that hydrogen increases the power price considerably. However as hydrogen flexibility relieves stress in high-demand periods for the grid power prices decrease in average for some countries. This suggests that while the deployment of green hydrogen will lead to a significant increase in power demand power prices will not necessarily experience a large increase.

Decarbonisation will need a significant societal shift. The when why and how we travel is going to look very different within a decade. Joining us is Florentine Roy – a leading expert on electric vehicles and Innovation Project Lead at UK Power Networks and Matt Hindle - Head of Net Zero and Sustainability at Wales and West Utilities. Let’s talk about the energy system implications of this massive undertaking and how it can be enabled by innovation in a fair and just way.

The podcast can be found here.

The development of more sustainable and zero-emissions collective transport solutions could play a very important measure in the near future within smart city policies. This paper tries to give a contribution to this aim proposing a novel approach to fuel cell vehicle design and operation. Traditional difficulties experienced in fuel cell transient operation are in fact normally solved in conventional vehicle prototypes through the hybridization of the propulsion system and with the complete fulfillment of transients in road energy demand through a high-capacity onboard energy storage device. This makes it normally necessary to use Li-ion battery solutions accepting their restrictions in terms of weight costs energy losses limited lifetime and environmental constraints. The proposed solution instead introduces a partitioning of the hydrogen fuel cell (FC) and novel optimal power control strategy with the aim of limiting the capacity of the energy storage still avoiding FC transient operation. The limited capacity of the resulting energy storage systems which instead has to answer higher power requests makes it possible to consider the utilization of a high-speed flywheel energy storage system (FESS) in place of high energy density Li-ion batteries. The proposed control strategy was validated by vehicle simulations based on a modular and parametric model; input data were acquired experimentally on an operating electric bus in real traffic conditions over an urban bus line. Simulation results highlight that the proposed control strategy makes it possible to obtain an overall power output for the FC stacks which better follows road power demands and a relevant downsizing of the FESS device.