- Home
- A-Z Publications
- Publications
Publications
Liquid Hydrogen as Prospective Energy Carrier: A Brief Review and Discussion of Underlying Assumptions Applied in Value Chain Analysis
Nov 2021
Publication
In the literature different energy carriers are proposed in future long-distance hydrogen value chains. Hydrogen can be stored and transported in different forms e.g. as compressed dense-phase hydrogen liquefied hydrogen and in chemically bound forms as different chemical hydrides. Recently different high-level value chain studies have made extrapolative investigations and compared such options with respect to energy efficiency and cost. Three recent journal papers overlap as the liquid hydrogen option has been considered in all three studies. The studies are not fully aligned in terms of underlying assumptions and battery limits. A comparison reveals partly vast differences in results for chain energy efficiency for long-distance liquid hydrogen transport which are attributable to distinct differences in the set of assumptions. Our comparison pinpoints the boiloff ratio i.e. evaporation losses due to heat ingress in liquid hydrogen storage tanks as the main cause of the differences and this assumption is further discussed. A review of spherical tank size and attributed boiloff ratios is presented for existing tanks of different vintage as well as for recently proposed designs. Furthermore the prospect for further extension of tanks size and reduction of boiloff ratio is discussed with a complementary discussion about the use of economic assumptions in extrapolative and predictive studies. Finally we discuss the impact of battery limits in hydrogen value chain studies and pinpoint knowledge needs and the need for a detailed bottom-up approach as a prerequisite for improving the understanding for pros and cons of the different hydrogen energy carriers.
Green Energy by Hydrogen Production from Water Splitting, Water Oxidation Catalysis and Acceptorless Dehydrogenative Coupling
Feb 2023
Publication
In this review we want to explain how the burning of fossil fuels is pushing us towards green energy. Actually for a long time we have believed that everything is profitable that resources are unlimited and there are no consequences. However the reality is often disappointing. The use of non-renewable resources the excessive waste production and the abandonment of the task of recycling has created a fragile thread that once broken may never restore itself. Metaphors aside we are talking about our planet the Earth and its unique ability to host life including ourselves. Our world has its balance; when the wind erodes a mountain a beach appears or when a fire devastates an area eventually new life emerges from the ashes. However humans have been distorting this balance for decades. Our evolving way of living has increased the number of resources that each person consumes whether food shelter or energy; we have overworked everything to exhaustion. Scientists worldwide have already said actively and passively that we are facing one of the biggest problems ever: climate change. This is unsustainable and we must try to revert it or if we are too late slow it down as much as possible. To make this happen there are many possible methods. In this review we investigate catalysts for using water as an energy source or instead of water alcohols. On the other hand the recycling of gases such as CO2 and N2O is also addressed but we also observe non-catalytic means of generating energy through solar cell production.
Everything About Hydrogen Podcast: Using Hydrogen to Decarbonise Steel Manufacturing
Mar 2022
Publication
Hydrogen could be used in many hard-to-decarbonize sectors. Foremost amongst them is the steel manufacturing industry. On this episode of EAH we speak with Dr. Martin Pei Executive Vice President and CTO of SSAB and the first Chairman of the Board for Hybrit Development AB. SSAB is a global steel company with a leading position in high-strength steels and related services. Together with their partners LKAB and Vattenfall SSAB are making a unique joint effort to change the Swedish iron and steel industry fundamentally. With HYBRIT technology SSAB aims to be the first steel company in the world to bring fossil-free steel to the market already in 2026 and largely eliminate carbon dioxide emissions from the company's own operations as soon as 2030.
The podcast can be found on their website.
The podcast can be found on their website.
Global Hydrogen Review 2022
Sep 2022
Publication
The Global Hydrogen Review is an annual publication by the International Energy Agency that tracks hydrogen production and demand worldwide as well as progress in critical areas such as infrastructure development trade policy regulation investments and innovation.
The report is an output of the Clean Energy Ministerial Hydrogen Initiative and is intended to inform energy sector stakeholders on the status and future prospects of hydrogen while also informing discussions at the Hydrogen Energy Ministerial Meeting organised by Japan. Focusing on hydrogen’s potentially major role in meeting international energy and climate goals this year’s Review aims to help decision makers fine-tune strategies to attract investment and facilitate deployment of hydrogen technologies while also creating demand for hydrogen and hydrogen-based fuels. It compares real-world developments with the stated ambitions of government and industry.
This year’s report includes a special focus on how the global energy crisis sparked by Russia’s invasion of Ukraine has accelerated the momentum behind hydrogen and on the opportunities that it offers to simultaneously contribute to decarbonisation targets and enhance energy security.
The report can be found on their website.
The report is an output of the Clean Energy Ministerial Hydrogen Initiative and is intended to inform energy sector stakeholders on the status and future prospects of hydrogen while also informing discussions at the Hydrogen Energy Ministerial Meeting organised by Japan. Focusing on hydrogen’s potentially major role in meeting international energy and climate goals this year’s Review aims to help decision makers fine-tune strategies to attract investment and facilitate deployment of hydrogen technologies while also creating demand for hydrogen and hydrogen-based fuels. It compares real-world developments with the stated ambitions of government and industry.
This year’s report includes a special focus on how the global energy crisis sparked by Russia’s invasion of Ukraine has accelerated the momentum behind hydrogen and on the opportunities that it offers to simultaneously contribute to decarbonisation targets and enhance energy security.
The report can be found on their website.
Green Hydrogen Production for Oil Refining - Finnish Case
Jan 2023
Publication
This study investigates the production of green hydrogen for use in oil refining as specified in the draft of European union delegated act published in May 2022. The European union plans to set strict requirements of additionality and reporting regarding the criteria of renewable electricity used in hydrogen production. Alkaline electrolyzer proton exchange membrane electrolyzer and solid oxide electrolyzer are evaluated in various scenarios supplied by wind power: power purchase agreement-based scenarios and wind power investment-based scenarios. In power purchase agreement-based scenarios baseload and pay as produced power purchase agreements (with and without electricity storage) are assessed. According to results the use of 600 MW compressed air energy storage could reduce the dependency on the grid by 7% but increase the cost of green hydrogen significantly. Investment-based scenarios produce green hydrogen with a lower operation cost but higher break-even price compared to power purchase agreement-based scenarios. The cheapest green hydrogen can be achieved by alkaline electrolyzer with baseload power purchase agreement. Direct ownership of wind power is outside the operation of oil refining industry thus power purchase agreements contracting is more likely to realize.
Development of a Hydrogen Supplement for use with IGEM/SR/25
Jun 2022
Publication
In response to the UK Government’s commitment to achieve net-zero carbon emissions by 2050 a range of research and demonstration projects are underway to investigate the feasibility of using hydrogen in place of natural gas within the national transmission and distribution system. In order for these projects to achieve their full scope of work a mechanism for performing hazardous area classification for hydrogen installations is required. At present IGEM/SR/25 is used to undertake such assessments for natural gas installations but the standard is not currently applicable to hydrogen or hydrogen/natural gas blends.<br/>This report presents updated data and a summary of the recommended methodologies for hazardous area classification of installations using hydrogen or blends of up to 20% hydrogen in natural gas. The contents of this report are intended to provide a technical commentary and the data for a hydrogen-specific supplement to IGEM/SR/25. The supplement will specifically cover 100% hydrogen and a 20/80% by volume blend of hydrogen/natural gas. Reference to intermediate blends is included in this report where appropriate to cover the anticipated step-wise introduction of hydrogen into the natural gas network.<br/>This report is divided into a series of appendices each of which covers a specific area of the IGEM standard. Each appendix includes a summary of specific recommendations made to enable IGEM/SR/25 to be applied to hydrogen and blends of up to 20% hydrogen in natural gas. The reader is encouraged to review the individual appendices for specific conclusions associated with the topic areas addressed in this report.<br/>In general the existing methodologies and approaches used for area classification in IGEM/SR/25 have been deemed appropriate for installations using either hydrogen or blends of up to 20% hydrogen in natural gas. Where necessary revised versions of the equations and zoning distances used in the standard are presented which account for the influence of material property differences between natural gas and the two alternative fuels considered in this work.
Alternative Fuels for Internal Combustion Engines
Aug 2020
Publication
The recent transport electrification trend is pushing governments to limit the future use of Internal Combustion Engines (ICEs). However the rationale for this strong limitation is frequently not sufficiently addressed or justified. The problem does not seem to lie within the engines nor with the combustion by themselves but seemingly rather with the rise in greenhouse gases (GHG) namely CO2 rejected to the atmosphere. However it is frequent that the distinction between fossil CO2 and renewable CO2 production is not made or even between CO2 emissions and pollutant emissions. The present revision paper discusses and introduces different alternative fuels that can be burned in IC Engines and would eliminate or substantially reduce the emission of fossil CO2 into the atmosphere. These may be non-carbon fuels such as hydrogen or ammonia or biofuels such as alcohols ethers or esters including synthetic fuels. There are also other types of fuels that may be used such as those based on turpentine or even glycerin which could maintain ICEs as a valuable option for transportation.
“Bigger than Government”: Exploring the Social Construction and Contestation of Net-zero Industrial Megaprojects in England
Jan 2023
Publication
Industry is frequently framed as hard-to-decarbonize given its diversity of requirements technologies and supply chains many of which are unique to particular sectors. Net zero commitments since 2019 have begun to challenge the carbon intensity of these various industries but progress has been slow globally. Against this backdrop the United Kingdom has emerged as a leader in industrial decarbonization efforts. Their approach is based on industrial clusters which cut across engineering spatial and socio-political dimensions. Two of the largest of these clusters in England in terms of industrial emissions are the Humber and Merseyside. In this paper drawn from a rich mixed methods original dataset involving expert interviews (N = 46 respondents) site visits (N = 20) a review of project documents and the academic literature we explore ongoing efforts to decarbonize both the Humber and Merseyside through the lens of spatially expansive and technically complex megaprojects. Both have aggressive implementation plans in place for the deployment of net-zero infrastructure with Zero Carbon Humber seeking billions in investment to build the country’s first large-scale bioenergy with carbon capture and storage (BECCS) plant alongside a carbon transport network and hydrogen production infrastructure and HyNet seeking billions in investment to build green and blue hydrogen facilities along with a carbon storage network near Manchester and Liverpool. We draw from the social construction of technology (SCOT) literature to examine the relevant social groups interpretive flexibility and patterns of closure associated with Zero Carbon Humber and HyNet. We connect our findings to eight interpretive frames surrounding the collective projects and make connections to problems contestation and closure.
Studies Concerning Electrical Repowering of a Training Airplane Using Hydrogen Fuel Cells
Mar 2024
Publication
The increase in greenhouse gas emissions as well as the risk of fossil fuel depletion has prompted a transition to electric transportation. The European Union aims to substantially reduce pollutant emissions by 2035 through the use of renewable energies. In aviation this transition is particularly challenging mainly due to the weight of onboard equipment. Traditional electric motors with radial magnetic flux have been replaced by axial magnetic flux motors with reduced weight and volume high efficiency power and torque. These motors were initially developed for electric vehicles with in-wheel motors but have been adapted for aviation without modifications. Worldwide there are already companies developing propulsion systems for various aircraft categories using such electric motors. One category of aircraft that could benefit from this electric motor development is traditionally constructed training aircraft with significant remaining flight resource. Electric repowering would allow their continued use for pilot training preparing them for future electrically powered aircraft. This article presents a study on the feasibility of repowering a classic training aircraft with an electric propulsion system. The possibilities of using either a battery or a hybrid source composed of a battery and a fuel cell as an energy source are explored. The goal is to utilize components already in production to eliminate the research phase for specific aircraft components.
Review on the Hydrogen Dispersion and the Burning Behavior of Fuel Cell Electric Vehicles
Oct 2022
Publication
The development of a hydrogen energy-based society is becoming the solution for more and more countries. Fuel cell electric vehicles are the best carriers for developing a hydrogen energy-based society. The current research on hydrogen leakage and the diffusion of fuel cell electric vehicles has been sufficient. However the study of hydrogen safety has not reduced the safety concerns for society and government management departments concerning the large-scale promotion of fuel cell electric vehicles. Hydrogen safety is both a technical and psychological issue. This paper aims to provide a comprehensive overview of fuel cell electric vehicles’ hydrogen dispersion and the burning behavior and introduce the relevant work of international standardization and global technical regulations. The CFD simulations in tunnels underground car parks and multistory car parks show that the hydrogen escape performance is excellent. At the same time the research verifies that the flow the direction of leakage and the vehicle itself are the most critical factors affecting hydrogen distribution. The impact of the leakage location and leakage pore size is much smaller. The relevant studies also show that the risk is still controllable even if the hydrogen leakage rate is increased ten times the limit of GTR 13 to 1000 NL/min and then ignited. Multi-vehicle combustion tests of fuel cell electric vehicles showed that adjacent vehicles were not ignited by the hydrogen. This shows that as long as the appropriate measures are taken the risk of a hydrogen leak or the combustion of fuel cell electric vehicles is controllable. The introduction of relevant standards and regulations also indirectly proves this point. This paper will provide product design guidelines for R&D personnel offer the latest knowledge and guidance to the regulatory agencies and increase the public’s acceptance of fuel cell electric vehicles.
Numerical Study on Protective Measures for a Skid-Mounted Hydrogen Refueling Station
Jan 2023
Publication
Hydrogen refueling stations are one of the key infrastructure components for the hydrogen-fueled economy. Skid-mounted hydrogen refueling stations (SHRSs) can be more easily commercialized due to their smaller footprints and lower costs compared to stationary hydrogen refueling stations. The present work modeled hydrogen explosions in a skid-mounted hydrogen refueling station to predict the overpressures for hydrogen-air mixtures and investigate the protective effects for different explosion vent layouts and protective wall distances. The results show that the explosive vents with the same vent area have similar overpressure reduction effects. The layout of the explosion vent affects the flame shape. Explosion venting can effectively reduce the inside maximum overpressure by 61.8%. The protective walls can reduce the overpressures but the protective walls should not be too close to the SHRS because high overpressures are generated inside the walls due to the confined shock waves. The protective wall with a distance of 6 m can effectively protect the surrounding people and avoid the secondary overpressure damage to the container.
Numerical Modeling of a Moderate Hydrogen Leakage in a Typical Two-vented Fuel Cell Configuration
Sep 2021
Publication
Numerical results are presented from two direct numerical simulations (DNS) where a moderate hydrogen leakage is modeled in a typical two-vented fuel cell configuration. The study mimics one of the experimental investigations carried out on the 1 m3 enclosure with a leak flow rate of 10.4 Nl.min−1 [1]. The injection dimensionless Richardson number is at the order of unity and thus characterizes a plume flow which becomes turbulent due to gravitational accelerations. Two large exterior regions are added to the computational domain to model correctly the exchange between the in/out flows at both vents and the outer environment. Two meshes are used in this study; a first consisting of 250 million cells while the second has 2 billion cells to ensure the fine DNS resolution at the level of Kolmogorov and Batchelor length scales. The high performance computation (HPC) platform TRUST is employed where the computational domain is distributed up to 5.104 central processing unit (CPU) cores. A detailed description of the flow structure and the hydrogen dispersion is provided where the sharp effect of the cross-flow on the plume is analyzed. Comparisons versus the experimental measurements show a very good agreement where both the bi-layer Linden regime and the maximal concentration in the top homogeneous layer are correctly reproduced by the DNS. This result is extremely important and breaks the limitations shown previously with statistical RANS approaches and LES models. This study can be considered as a good candidate for any further improvements of the theoretical industrial plume models in general and for the estimation of the non-constant entrainment coefficient in particular.
Time-phased Geospatial Siting Analysis for Renewable Hydrogen Production Facilities under a Billion-kilogram-scale Build-out using California as an Example
Jun 2022
Publication
For renewable hydrogen to be a significant part of the future decarbonized energy and transportation sectors a rapid and massive build-out of hydrogen production facilities will be needed. This paper describes a geospatial modeling approach to identifying the optimal locations for renewable hydrogen fuel production throughout the state of California based on least-cost generation and transport. This is accomplished by (1) estimating and projecting California renewable hydrogen demand scenarios through the year 2050 (2) identifying feedstock locations (3) excluding areas not suitable for development and (4) selecting optimal site locations using commercial geospatial modeling software. The findings indicate that there is a need for hundreds of new renewable hydrogen production facilities in the decades preceding the year 2050. In selecting sites for development feedstock availability by technology type is the driving factor."
Machine Learning-based Energy Optimization for On-site SMR Hydrogen Production
Jun 2021
Publication
The production and application of hydrogen an environmentally friendly energy source have been attracting increasing interest of late. Although steam methane reforming (SMR) method is used to produce hydrogen it is difficult to build a high-fidelity model because the existing equation-oriented theoretical model cannot be used to clearly understand the heat-transfer phenomenon of a complicated reforming reactor. Herein we developed an artificial neural network (ANN)-based data-driven model using 485710 actual operation datasets for optimizing the SMR process. Data preprocessing including outlier removal and noise filtering was performed to improve the data quality. A model with high accuracy (average R2 = 0.9987) was developed which can predict six variables through hyperparameter tuning of a neural network model as follows: syngas flow rate; CO CO2 CH4 and H2 compositions; and steam temperature. During optimization the search spaces for nine operating variables namely the natural gas flow rate for the feed and fuel hydrogen flow rate for desulfurization water flow rate and temperature air flow rate SMR inlet temperature and pressure and low-temperature shift (LTS) inlet temperature were defined and applied to the developed model for predicting the thermal efficiencies for 387420489 cases. Subsequently five constraints were established to consider the feasibility of the process and the decision variables with the highest process thermal efficiency were determined. The process operating conditions showed a thermal efficiency of 85.6%.
Hydrogen Leakage Simulation and Risk Analysis of Hydrogen Fueling Station in China
Sep 2022
Publication
Hydrogen is a renewable energy source with various features clean carbon-free high energy density which is being recognized internationally as a “future energy.” The US the EU Japan South Korea China and other countries or regions are gradually clarifying the development position of hydrogen. The rapid development of the hydrogen energy industry requires more hydrogenation infrastructure to meet the hydrogenation need of hydrogen fuel cell vehicles. Nevertheless due to the frequent occurrence of hydrogen infrastructure accidents their safety has become an obstacle to large-scale construction. This paper analyzed five sizes (diameters of 0.068 mm 0.215 mm 0.68 mm 2.15 mm and 6.8 mm) of hydrogen leakage in the hydrogen fueling station using Quantitative Risk Assessment (QRA) and HyRAM software. The results show that unignited leaks occur most frequently; leaks caused by flanges valves instruments compressors and filters occur more frequently; and the risk indicator of thermal radiation accident and structure collapse accident caused by over-pressure exceeds the Chinese individual acceptable risk standard and the risk indicator of a thermal radiation accident and head impact accident caused by overpressure is below the Chinese standard. On the other hand we simulated the consequences of hydrogen leak from the 45 MPa hydrogen storage vessels by the physic module of HyRAM and obtained the ranges of plume dispersion jet fire radiative heat flux and unconfined overpressure. We suggest targeted preventive measures and safety distance to provide references for hydrogen fueling stations’ safe construction and operation.
Modeling of a High Temperature Heat Exchanger to Supply Hydrogen Required by Fuel Cells Through Reforming Process
Sep 2021
Publication
Hydrogen as a clean fuel and a new energy source can be produced by various methods. One of these common and economical methods of hydrogen production is hydrocarbon vapor modification. This research studies hydrogen production using a propane steam reforming process inside a high temperature heat exchanger. The application of this high temperature heat exchanger in the path of the power supply line is a fuel cell stack unit to supply the required hydrogen of the device. The heat exchanger consists of a set of cylindrical tubes housed inside a packed-bed called a reformer. The energy required to perform the reaction is supplied through these tubes in which high temperature gas is injected and the heat exchanger is insulated to prevent energy loss. The results show that at maximum temperature and velocity of hot gases (900 K and 1.5 m s−1 ) complete consumption of propane can be observed before the outlet of the reformer. Also in the mentioned conditions the maximum hydrogen production (above 92%) is obtained. The best permeability under which the system can perform best is 1×10−9 m2.
Hydrogen Production from Surplus Electricity Generated by an Autonomous Renewable System: Scenario 2040 on Grand Canary Island, Spain
Sep 2022
Publication
The electrification of final energy uses is a key strategy to reach the desired scenario with zero greenhouse gas emissions. Many of them can be electrified with more or less difficulty but there is a part that is difficult to electrify at a competitive cost: heavy road transport maritime and air transport and some industrial processes are some examples. For this reason the possibility of using other energy vectors rather than electricity should be explored. Hydrogen can be considered a real alternative especially considering that this transition should not be carried out immediately because initially the electrification would be carried out in those energy uses that are considered most feasible for this conversion. The Canary Islands’ government is making considerable efforts to promote a carbon-free energy mix starting with renewable energy for electricity generation. Still in the early–mid 2030s it will be necessary to substitute heavy transport fossil fuel. For this purpose HOMER software was used to analyze the feasibility of hydrogen production using surplus electricity produced by the future electricity system. The results of previous research on the optimal generation MIX for Grand Canary Island based exclusively on renewable sources were used. This previous research considers three possible scenarios where electricity surplus is in the range of 2.3–4.9 TWh/year. Several optimized scenarios using demand-side management techniques were also studied. Therefore based on the electricity surpluses of these scenarios the optimization of hydrogen production and storage systems was carried out always covering at least the final hydrogen demand of the island. As a result it is concluded that it would be possible to produce 3.5 × 104 to 7.68 × 104 t of H2/year. In these scenarios 3.15 × 105 to 6.91 × 105 t of water per year would be required and there could be a potential production of 2.8 × 105 to 6.14 × 105 t of O2 per year.
Potential for Hydrogen and Power-to-Liquid in a Low-carbon EU Energy System Using Cost Optimization
Oct 2018
Publication
Hydrogen represents a versatile energy carrier with net zero end use emissions. Power-to-Liquid (PtL) includes the combination of hydrogen with CO2 to produce liquid fuels and satisfy mostly transport demand. This study assesses the role of these pathways across scenarios that achieve 80–95% CO2 reduction by 2050 (vs. 1990) using the JRC-EU-TIMES model. The gaps in the literature covered in this study include a broader spatial coverage (EU28+) and hydrogen use in all sectors (beyond transport). The large uncertainty in the possible evolution of the energy system has been tackled with an extensive sensitivity analysis. 15 parameters were varied to produce more than 50 scenarios. Results indicate that parameters with the largest influence are the CO2 target the availability of CO2 underground storage and the biomass potential.
Hydrogen demand increases from 7 mtpa today to 20–120 mtpa (2.4–14.4 EJ/yr) mainly used for PtL (up to 70 mtpa) transport (up to 40 mtpa) and industry (25 mtpa). Only when CO2 storage was not possible due to a political ban or social acceptance issues was electrolysis the main hydrogen production route (90% share) and CO2 use for PtL became attractive. Otherwise hydrogen was produced through gas reforming with CO2 capture and the preferred CO2 sink was underground. Hydrogen and PtL contribute to energy security and independence allowing to reduce energy related import cost from 420 bln€/yr today to 350 or 50 bln€/yr for 95% CO2 reduction with and without CO2 storage. Development of electrolyzers fuel cells and fuel synthesis should continue to ensure these technologies are ready when needed. Results from this study should be complemented with studies with higher spatial and temporal resolution. Scenarios with global trading of hydrogen and potential import to the EU were not included.
Hydrogen demand increases from 7 mtpa today to 20–120 mtpa (2.4–14.4 EJ/yr) mainly used for PtL (up to 70 mtpa) transport (up to 40 mtpa) and industry (25 mtpa). Only when CO2 storage was not possible due to a political ban or social acceptance issues was electrolysis the main hydrogen production route (90% share) and CO2 use for PtL became attractive. Otherwise hydrogen was produced through gas reforming with CO2 capture and the preferred CO2 sink was underground. Hydrogen and PtL contribute to energy security and independence allowing to reduce energy related import cost from 420 bln€/yr today to 350 or 50 bln€/yr for 95% CO2 reduction with and without CO2 storage. Development of electrolyzers fuel cells and fuel synthesis should continue to ensure these technologies are ready when needed. Results from this study should be complemented with studies with higher spatial and temporal resolution. Scenarios with global trading of hydrogen and potential import to the EU were not included.
Public Acceptance for the Implementation of Hydrogen Self-refueling Stations
Sep 2021
Publication
The utilization of hydrogen energy is important for achieving a low-carbon society. Japan has set ambitious goals for hydrogen stations and fuel cell vehicles focusing on the introduction and dissemination of self-refuelling systems. This paper evaluates public trust in the fuel equipment and self-handling technology related to self-refuelling hydrogen stations and compares it with that for widespread gasoline stations. To this end the results of an online survey of 300 people with Japanese driver licenses are reported and analyzed. The results show that trust in the equipment and self-handling is more important for the user than trust in the fuel. In addition to introduce and disseminate new technology such as hydrogen stations users must be made aware of the risk of using the technology until it becomes as familiar as existing gasoline station technology.
A Real-Time Load Prediction Control for Fuel Cell Hybrid Vehicle
May 2022
Publication
The development of hydrogen energy is an effective solution to the energy and environmental crisis. Hydrogen fuel cells and energy storage cells as hybrid power have broad application prospects in the field of vehicle power. Energy management strategies are key technologies for fuel cell hybrid systems. The traditional optimization strategy is generally based on optimization under the global operating conditions. The purpose of this project is to develop a power allocation optimization method based on real-time load forecasting for fuel cell/lithium battery hybrid electric vehicles which does not depend on specific working conditions or causal control methods. This paper presents an energy-management algorithm based on real-time load forecasting using GRU neural networks to predict load requirements in the short time domain and then the local optimization problem for each predictive domain is solved using a method based on Pontryagin’s minimum principle (PMP). The algorithm adopts the idea of model prediction control (MPC) to transform the global optimization problem into a series of local optimization problems. The simulation results show that the proposed strategy can achieve a good fuel-saving control effect. Compared with the rule-based strategy and equivalent hydrogen consumption strategy (ECMS) the fuel consumption is lower under two typical urban conditions. In the 1800 s driving cycle under WTCL conditions the fuel consumption under the MPC-PMP strategy is 22.4% lower than that based on the ECMS strategy and 10.3% lower than the rules-based strategy. Under CTLT conditions the fuel consumption of the MPC-PMP strategy is 13.12% lower than that of the rule-based strategy and 3.01% lower than the ECMS strategy.
HyDeploy Report: Summary of European Hydrogen Blending Projects
Jun 2018
Publication
Across Europe permitted blend levels of hydrogen blending into the gas grid are appreciably higher than that currently permitted in the UK up to 12% mol/mol compared with 0.1% mol/mol. Whilst there is some routine blending undertaking – typically power to gas applications three major projects have been undertaken to demonstrate operation of a gas distribution network at higher blend levels of hydrogen.<br/>A Dutch project was completed in 2011 which demonstrated successful operation into a network with new appliances at 20% mol/mol. A German project was completed in 2015 which demonstrated successful operation into an existing gas network with existing appliances at their permitted level of 10% mol/mol. In France an extensive programme is underway to inject hydrogen into a network at 20% mol/mol due to commence injection in 2018.<br/>Each of these projects undertook extensive pre-trial activities and operational data was collected during the Dutch and German trials. The programme of pre-trial work for the French project was particularly extensive and mirrored the work done by HyDeploy. This led to a permit being granted for the French project at 20% mol/mol with injection into the network imminent.<br/>The HyDeploy team has engaged with each of the project teams who have been very co-operative; this has enabled scientific sharing of best practice. In all cases the projects were successful. The participants in the Dutch project were particularly keen to have been able to undertake a similar trial to HyDeploy; a larger trial into existing appliances. However political changes in Holland have precluded that at this time such progress was not limited by technical findings from the work.<br/>A high level overview of the projects and the data provided is summarised in this report. More detailed information is referenced and covered in more detail where required in the appropriate individual topic reports supporting the Exemption.<br/>Click on supplements tab to view the other documents from this report
Towards a Sustainable Hydrogen Economy: Optimisation-based Framework for Hydrogen Infrastructure Development
Sep 2016
Publication
This work studies the development of a sustainable hydrogen infrastructure that supports the transition towards a low-carbon transport system in the United Kingdom (UK). The future hydrogen demand is forecasted over time using a logistic diffusion model which reaches 50% of the market share by 2070. The problem is solved using an extension of SHIPMod an optimisation-based framework that consists of a multi-period spatially-explicit mixed-integer linear programming (MILP) formulation. The optimisation model combines the infrastructure elements required throughout the different phases of the transition namely economies of scale road and pipeline transportation modes and carbon capture and storage (CCS) technologies in order to minimise the present value of the total infrastructure cost using a discounted cash-flow analysis. The results show that the combination of all these elements in the mathematical formulation renders optimal solutions with the gradual infrastructure investments over time required for the transition towards a sustainable hydrogen economy.
Fuel Cells and Hydrogen: Joint Undertaking Programme Review 2017 Final Report
Dec 2018
Publication
The Programme Review Report ensures that the FCH JU programme is aligned with its strategy and objectives. This year the programme review was performed following a new procedure: it was carried out by the European Commission’s in-house science service the Joint Research Committee (JRC). The 2017 review pays particular attention to the added value effectiveness and efficiency of FCH JU activities. The review is structured around six panels under three pillars: transport energy and cross-cutting projects summarising the FCH JU Project Portfolio
Roadmap to Hybrid Offshore System with Hydrogen and Power Co-generation
Sep 2021
Publication
Constrained by the expansion of the power grid the development of offshore wind farms may be hindered and begin to experience severe curtailment or restriction. The combination of hydrogen production through electrolysis and hydrogen-to-power is considered to be a potential option to achieve the goal of low-carbon and energy security. This work investigates the competitiveness of different system configurations to export hydrogen and/or electricity from offshore plants with particular emphasis on unloading the mixture of hydrogen and electricity to end-users on land. Including the levelized energy cost and net present value a comprehensive techno-economic assessment method is proposed to analyze the offshore system for five scenarios. Assuming that the baseline distance is 10 km the results show that exporting hydrogen to land through pipelines shows the best economic performance with the levelized energy cost of 3.40 $/kg. For every 10 km increase in offshore distance the net present value of the project will be reduced by 5.69 MU$ and the project benefit will be positive only when the offshore distance is less than 53.5 km. An important finding is that the hybrid system under ship transportation mode is not greatly affected by the offshore distance. Every 10% increase in the proportion of hydrogen in the range of 70%–100% can increase the net present value by 1.43–1.70 MU$ which will increase by 7.36–7.37 MU$ under pipeline transportation mode. Finally a sensitivity analysis was carried out to analyze the wind speed electricity and hydrogen prices on the economic performance of these systems.
A Comparison of Two Hydrogen Storages in a Fossil Free Direct Reduced Iron Process
Jul 2021
Publication
Hydrogen direct reduction has been proposed as a means to decarbonize primary steelmaking. Preferably the hydrogen necessary for this process is produced via water electrolysis. A downside to electrolysis is the large electricity demand. The electricity cost of water electrolysis may be reduced by using a hydrogen storage to exploit variations in electricity price i.e. producing more hydrogen when the electricity price is low and vice versa. In this paper we compare two kinds of hydrogen storages in the context of a hydrogen direct reduction process via simulations based on historic Swedish electricity prices: the storage of gaseous hydrogen in an underground lined rock cavern and the storage of hydrogen chemically bound in methanol. We find the methanol-based storages to be economically advantageous to lined rock caverns in several scenarios. The main advantages of methanol-based storage are the low investment cost of storage capacity and the possibility to decouple storage capacity from rate capacity. Nevertheless no storage option is found to be profitable for historic Swedish electricity prices. For the storages to be profitable electricity prices must be volatile with relatively frequent high peaks which has happened rarely in Sweden in recent years. However such scenarios may become more common with the expected increase of intermittent renewable power in the Swedish electricity system.
The Impact of Operating Conditions on the Performance of a CH4 Dry Reforming Membrane Reactor for H2 Production
May 2020
Publication
Biogas is a promising resource for the production of H2 since it liberates energy by recycling waste along with the reduction of CO2. In this paper the biogas dry reforming membrane reactor is proposed to produce H2 for use in fuel cells. Pd/Cu alloy membrane is used to enhance the performance of the biogas dry reforming reactor. This study aims at understanding the effect of operating parameters such as feed ratio of sweep gas pressure in the reactor and reaction temperature on the performance of the biogas dry reforming membrane reactor. The effect of the molar ratio of the supplied CH4:CO2 feed ratio of the sweep gas and the valve located at the outlet of the reaction chamber on the performance of biogas dry reforming are investigated. Besides the thermal efficiency of the proposed reactor is also evaluated. The results show that the concentration of H2 in the closed valve condition is higher than that of the open valve and the optimum feed ratio of the sweep gas to produce H2 is 1 irrespective of the molar ratio of supplied CH4:CO2. Also H2 selectivity and CO selectivity increases and decreases respectively when the reaction temperature increases irrespective of the molar ratio of supplied CH4:CO2. Therefore the thermal efficiency of the closed valve is higher than that of the opened valve. Also the thermal efficiency is the maximum when the feed ratio of the sweep gas is 1 due to high H2 production performance.
The European Green Deal
Dec 2019
Publication
Climate change and environmental degradation are an existential threat to Europe and the world. To overcome these challenges Europe needs a new growth strategy that will transform the Union into a modern resource-efficient and competitive economy where
The European Green Deal is our plan to make the EU's economy sustainable. We can do this by turning climate and environmental challenges into opportunities and making the transition just and inclusive for all
The European Green Deal provides an action plan to
The EU aims to be climate neutral in 2050. We proposed a European Climate Law to turn this political commitment into a legal obligation.
Reaching this target will require action by all sectors of our economy including
The EU will also provide financial support and technical assistance to help those that are most affected by the move towards the green economy. This is called the Just Transition Mechanism. It will help mobilise at least €100 billion over the period 2021-2027 in the most affected regions.
- there are no net emissions of greenhouse gases by 2050
- economic growth is decoupled from resource use
- no person and no place is left behind
The European Green Deal is our plan to make the EU's economy sustainable. We can do this by turning climate and environmental challenges into opportunities and making the transition just and inclusive for all
The European Green Deal provides an action plan to
- boost the efficient use of resources by moving to a clean circular economy
- restore biodiversity and cut pollution
The EU aims to be climate neutral in 2050. We proposed a European Climate Law to turn this political commitment into a legal obligation.
Reaching this target will require action by all sectors of our economy including
- investing in environmentally-friendly technologies
- supporting industry to innovate
- rolling out cleaner cheaper and healthier forms of private and public transport
- decarbonising the energy sector
- ensuring buildings are more energy efficient
- working with international partners to improve global environmental standards
The EU will also provide financial support and technical assistance to help those that are most affected by the move towards the green economy. This is called the Just Transition Mechanism. It will help mobilise at least €100 billion over the period 2021-2027 in the most affected regions.
The Role of Renewable Hydrogen and Inter-seasonal Storage in Decarbonising Heat – Comprehensive Optimisation of Future Renewable Energy Value Chains
Nov 2018
Publication
Demands for space and water heating constitute a significant proportion of the total energy demands in Great Britain and are predominantly satisfied through natural gas which makes the heat sector a large emitter of carbon dioxide. Renewable hydrogen which can be injected into the gas grid or used directly in processes for generating heat and/or electricity is being considered as a low-carbon alternative energy carrier to natural gas because of its suitability for large-scale long- and short-term storage and low transportation losses all of which help to overcome the intermittency and seasonal variations in renewables. This requires new infrastructures for production storage transport and utilisation of renewable hydrogen – a hydrogen value chain – the design of which involves many interdependent decisions such as: where to locate wind turbines; where to locate electrolysers close to wind generation or close to demands; whether to transport energy as electricity or hydrogen and how; where to locate storage facilities; etc. This paper presents the Value Web Model a novel and comprehensive spatio-temporal mixed-integer linear programming model that can simultaneously optimise the design planning and operation of integrated energy value chains accounting for short-term dynamics inter-seasonal storage and investments out to 2050. It was coupled with GIS modelling to identify candidate sites for wind generation and used to optimise a number of scenarios for the production of hydrogen from onshore and offshore wind turbines in order to satisfy heat demands. The results show that over a wide range of scenarios the optimal pathway to heat is roughly 20% hydrogen and 80% electricity. Hydrogen storage both in underground caverns and pressurised tanks is a key enabling technology.
An Investigation of a (Vinylbenzyl) Trimethylammonium and N-Vinylimidazole-Substituted Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) Copolymer as an Anion-Exchange Membrane in a Lignin-Oxidising Electrolyser
Jun 2021
Publication
Electrolysis is seen as a promising route for the production of hydrogen from water as part of a move to a wider “hydrogen economy”. The electro-oxidation of renewable feedstocks offers an alternative anode couple to the (high-overpotential) electrochemical oxygen evolution reaction for developing low-voltage electrolysers. Meanwhile the exploration of new membrane materials is also important in order to try and reduce the capital costs of electrolysers. In this work we synthesise and characterise a previously unreported anion-exchange membrane consisting of a fluorinated polymer backbone grafted with imidazole and trimethylammonium units as the ion-conducting moieties. We then investigate the use of this membrane in a lignin-oxidising electrolyser. The new membrane performs comparably to a commercially-available anion-exchange membrane (Fumapem) for this purpose over short timescales (delivering current densities of 4.4 mA cm−2 for lignin oxidation at a cell potential of 1.2 V at 70 °C during linear sweep voltammetry) but membrane durability was found to be a significant issue over extended testing durations. This work therefore suggests that membranes of the sort described herein might be usefully employed for lignin electrolysis applications if their robustness can be improved.
Selected Aspects of Hydrogen Production via Catalytic Decomposition of Hydrocarbons
Feb 2021
Publication
Owing to the high hydrogen content hydrocarbons are considered as an alternative source for hydrogen energy purposes. Complete decomposition of hydrocarbons results in the formation of gaseous hydrogen and solid carbonaceous by-product. The process is complicated by the methane formation reaction when the released hydrogen interacts with the formed carbon deposits. The present study is focused on the effects of the reaction mixture composition. Variations in the inlet hydrogen and methane concentrations were found to influence the carbon product’s morphology and the hydrogen production efficiency. The catalyst containing NiO (82 wt%) CuO (13 wt%) and Al2O3 (5 wt%) was prepared via a mechanochemical activating procedure. Kinetics of the catalytic process of hydrocarbons decomposition was studied using a reactor equipped with McBain balances. The effects of the process parameters were explored in a tubular quartz reactor with chromatographic analysis of the outlet gaseous products. In the latter case the catalyst was loaded piecemeal. The texture and morphology of the produced carbon deposits were investigated by nitrogen adsorption and electron microscopy techniques.
The Role of Advanced Demand-sector Technologies and Energy Demand Reduction in Achieving Ambitious Carbon Budgets
Jan 2019
Publication
Limiting cumulative carbon emissions to keep global temperature increase to well below 2°C (and as low as 1.5°C) is an extremely challenging task requiring rapid reduction in the carbon intensity of all sectors of the economy and with limited leeway for residual emissions. Addressing residual emissions in ‘challenging-to-decarbonise’ sectors such as the industrial and aviation sectors relies on the development and commercialization of innovative advanced technologies currently still in their infancy. The aim of this study was to (a) explore the role of advanced technologies in achieving deep decarbonisation of the energy system and (b) provide technology- specific details of how rapid and deep carbon intensity reductions can be achieved in the energy demand sectors. This was done using TIAM-Grantham – a linear cost optimization model of the global energy system with a detailed representation of demand-side technologies. We find that the inclusion of advanced technologies in the demand sectors together with energy demand reduction through behavioural changes enables the model to achieve the rapid and deep decarbonisation of the energy system associated with limiting global warming to below 2°C whilst at the same time reduces reliance on negative emissions technologies by up to ∼18% compared to the same scenario with a standard set of technologies. Realising such advanced technologies at commercial scales as well as achieving such significant reductions in energy demand represents a major challenge for policy makers businesses and civil society. There is an urgent need for continued R&D efforts in the demand sectors to ensure that advanced technologies become commercially available when we need them and to avoid the gamble of overreliance on negative emissions technologies to offset residual emissions.
Techno-economic Analysis of Freight Railway Electrification by Overhead Line, Hydrogen and Batteries: Case Studies in Norway and USA
Aug 2019
Publication
Two non-electrified railway lines one in Norway and the other in the USA are analysed for their potential to be electrified with overhead line equipment batteries hydrogen or hydrogen-battery hybrid powertrains. The energy requirements are established with single-train simulations including the altitude profiles of the lines air and rolling resistances and locomotive tractive-effort curves. The composition of the freight trains in terms of the number of locomotives battery wagons hydrogen wagons etc. is also calculated by the same model. The different technologies are compared by the criteria of equivalent annual costs benefit–cost ratio payback period and up-front investment based on the estimated techno-economic parameters for years 2020 2030 and 2050. The results indicate the potential of batteries and fuel cells to replace diesel on rail lines with low traffic volumes.
Energy Management System for Hybrid PV/Wind/Battery/Fuel Cell in Microgrid-Based Hydrogen and Economical Hybrid Battery/Super Capacitor Energy Storage
Sep 2021
Publication
The present work addresses the modelling control and simulation of a microgrid integrated wind power system with Doubly Fed Induction Generator (DFIG) using a hybrid energy storage system. In order to improve the quality of the waveforms (voltages and currents) supplied to the grid instead of a two level-inverter the rotor of the DFIG is supplied using a three-level inverter. A new adaptive algorithm based on combined Direct Reactive Power Control (DRPC) and fuzzy logic controls techniques is applied to the proposed topology. In this work two topologies are proposed. In the first one the active power injected into the grid is smoothened by using an economical hybrid battery and supercapacitor energy storage system. However in the second one the excess wind energy is used to produce and store the hydrogen and then a solid oxide fuel cell system (SOFC) is utilized to regenerate electricity by using the stored hydrogen when there is not enough wind energy. To avoid overcharging deep discharging of batteries to mitigate fluctuations due to wind speed variations and to fulfil the requirement of the load profile a power management algorithm is implemented. This algorithm ensures smooth output power in the first topology and service continuity in the second. The modelling and simulation results are presented and analysed using Matlab/Simulin.
How Do Dissolved Gases Affect the Sonochemical Process of Hydrogen Production: An Overview of Thermodynamic and Mechanistic Effects – On the “Hot Spot Theory”
Dec 2020
Publication
Although most of researchers agree on the elementary reactions behind the sonolytic formation of molecular hydrogen (H2) from water namely the radical attack of H2O and H2O2 and the free radicals recombination several recent papers ignore the intervention of the dissolved gas molecules in the kinetic pathways of free radicals and hence may wrongly assess the effect of dissolved gases on the sonochemical production of hydrogen. One may fairly ask to which extent is it acceptable to ignore the role of the dissolved gas and its eventual decomposition inside the acoustic cavitation bubble? The present opinion paper discusses numerically the ways in which the nature of dissolved gas i.e. N2 O2 Ar and air may influence the kinetics of sonochemical hydrogen formation. The model evaluates the extent of direct physical effects i.e. dynamics of bubble oscillation and collapse events if any against indirect chemical effects i.e. the chemical reactions of free radicals formation and consequently hydrogen emergence it demonstrates the improvement in the sonochemical hydrogen production under argon and sheds light on several misinterpretations reported in earlier works due to wrong assumptions mainly related to initial conditions. The paper also highlights the role of dissolved gases in the nature of created cavitation and hence the eventual bubble population phenomena that may prevent the achievement of the sonochemical activity. This is particularly demonstrated experimentally using a 20 kHz Sinaptec transducer and a Photron SA 5 high speed camera in the case of CO2-saturated water where degassing bubbles are formed instead of transient cavitation.
Performance Assessment of a Hybrid System with Hydrogen Storage and Fuel Cell for Cogeneration in Buildings
Jun 2020
Publication
The search for new fuels to supersede fossil fuels has been intensified these recent decades. Among these fuels hydrogen has attracted much interest due to its advantages mainly cleanliness and availability. It can be produced from various raw materials (e.g. water biomass) using many resources mainly water electrolysis and natural gas reforming. However water electrolysis combined with renewable energy sources is the cleanest way to produce hydrogen while reducing greenhouse gases. Besides hydrogen can be used by fuel cells for producing both electrical and thermal energy. The aim of this work was towards efficient integration of this system into energy efficient buildings. The system is comprised of a photovoltaic system hydrogen electrolyzer and proton exchange membrane fuel cell operating as a cogeneration system to provide the building with both electricity and thermal energy. The system’s modeling simulations and experimentations were first conducted over a short-run period to assess the system’s performance. Reported results show the models’ accuracy in analyzing the system’s performance. We then used the developed models for long-run testing of the hybrid system. Accordingly the system’s electrical efficiency was almost 32%. Its overall efficiency reached 64.5% when taking into account both produced electricity and thermal energy.
Hydrogen Production, Storage and Transport for Renewable Energy and Chemicals: An Environmental Footprint Assessment
Dec 2022
Publication
Hydrogen applications range from an energy carrier to a feedstock producing bulk and other chemicals and as an essential reactant in various industrial applications. However the sustainability of hydrogen production storage and transport are neither unquestionable nor equal. Hydrogen is produced from natural gas biogas aluminium acid gas biomass electrolytic water splitting and others; a total of eleven sources were investigated in this work. The environmental impact of hydrogen production storage and transport is evaluated in terms of greenhouse gas and energy footprints acidification eutrophication human toxicity potential and eco-cost. Different electricity mixes and energy footprint accounting approaches supported by sensitivity analysis are conducted for a comprehensive overview. H2 produced from acid gas is identified as the production route with the highest eco-benefit (− 41188 €/t H2) while the biomass gasification method incurred the highest eco-cost (11259 €/t H2). The water electrolysis method shows a net positive energy footprint (60.32 GJ/t H2) suggesting that more energy is used than produced. Considering the operating footprint of storage and transportation gaseous hydrogen transported via a pipeline is a better alternative from an environmental point of view and with a lower energy footprint (38 %–85%) than the other options. Storage and transport (without construction) could have accounted for around 35.5% of the total GHG footprint of a hydrogen value chain (production storage transportation and losses) if liquefied and transported via road transport instead of a pipeline. The identified results propose which technologies are less burdensome to the environment.
Effect of Ignition Energy and Hydrogen Addition on Laminar Flame Speed, Ignition Delay Time, and Flame Rising Time of Lean Methane/Air Mixtures
Mar 2022
Publication
A series of experiments were performed to investigate the effect of ignition energy (Eig) and hydrogen addition on the laminar burning velocity (Su 0 ) ignition delay time (tdelay) and flame rising time (trising) of lean methane−air mixtures. The mixtures at three different equivalence ratios (φ) of 0.6 0.7 and 0.8 with varying hydrogen volume fractions from 0 to 50% were centrally ignited in a constant volume combustion chamber by a pair of pin-to-pin electrodes at a spark gap of 2.0 mm. In situ ignition energy (Eig ∼2.4 mJ ÷ 58 mJ) was calculated by integration of the product of current and voltage between positive and negative electrodes. The result revealed that the Su 0 value increases non-linearly with increasing hydrogen fraction at three equivalence ratios of 0.6 0.7 and 0.8 by which the increasing slope of Su 0 changes from gradual to drastic when the hydrogen fraction is greater than 20%. tdelay and trising decrease quickly with increasing hydrogen fraction; however trising drops faster than tdelay at φ = 0.6 and 0.7 and the reverse is true at φ = 0.8. Furthermore tdelay transition is observed when Eig > Eigcritical by which tdelay drastically drops in the pre-transition and gradually decreases in the post-transition. These results may be relevant to spark ignition engines operated under lean-burn conditions.
Labour Implications of the Net-zero Transition and Clean Energy Exports in Australia
Mar 2024
Publication
We examine the employment implications of a domestic net-zero transition and establishment of clean energy export systems for an historically significant energy exporting country through a case study of Australia. The labour impacts of a multi-decadal transition are simulated across both the domestic and export energy systems considering a wide range of energy technologies resources and activities with assessment according to occupation lifecycle stage education and skill requirements. Across all net-zero scenario pathways by mid-century the total gross employment created for the domestic and export sectors comprises 210–490 thousand jobs and 350–510 thousand jobs respectively. This represents a significant expansion of energy sector employment from the current total of 120 thousand across domestic and export sectors an increase from less than 1 % of the total Australian workforce in 2020 to 3–4 % by 2060. The need to build out energy system infrastructure at large-scale over a number of decades results in construction jobs continuing over that timeframe and a subsequent need for a large ongoing operations and maintenance workforce for new energy system assets. Those employed in domestic energy markets work primarily in utility solar PV onshore wind batteries and electricity transmission and distribution activities while export market jobs are dominated by clean hydrogen production and shipping supply chains. Crucially these export jobs are unevenly distributed across the country in regions of highest quality solar resource. All states and territories experience net job growth across each decade to 2060. However in a few sub-state regions net job losses occur in the short-term.
Thermodynamics and Kinetics of Hydriding and Dehydriding Reactions in Mg-based Hydrogen Storage Materials
Oct 2021
Publication
Mg-based materials are one of the most promising hydrogen storage candidates due to their high hydrogen storage capacity environmental benignity and high Clarke number characteristics. However the limited thermodynamics and kinetic properties pose major challenges for their engineering applications. Herein we review the recent progress in improving their thermodynamics and kinetics with an emphasis on the models and the influence of various parameters in the calculated models. Subsequently the impact of alloying composite and nano-crystallization on both thermodynamics and dynamics are discussed in detail. In particular the correlation between various modification strategies and the hydrogen capacity dehydrogenation enthalpy and temperature hydriding/dehydriding rates are summarized. In addition the mechanism of hydrogen storage processes of Mg-based materials is discussed from the aspect of classical kinetic theories and microscope hydrogen transferring behavior. This review concludes with an outlook on the remaining challenge issues and prospects.
Suitable Site Selection for Solar‐Based Green Hydrogen in Southern Thailand Using GIS‐MCDM Approach
May 2022
Publication
Climate change mitigation efforts are in dire need of greener and more versatile fuel al‐ ternatives to fossil fuels. Green hydrogen being both renewable and flexible has the potential to offset fossil fuels as the primary fuel source. Countries around the world are planning to develop their green hydrogen industries and accurate potential assessment is vital. This study employed the consolidation of a geographic information system (GIS) and the analytical hierarchy process (AHP) technique of multicriteria decision making (MCDM) for the potential assessment of green hydrogen in southern Thailand through the selection of suitable sites for solar‐based green hy‐ drogen production. Technical economic and environmental criteria with 10 sub‐criteria were con‐ sidered for the selection of suitable sites. With 0.243 (24.3%) weight the distance from protected areas turned out to be the most important sub‐criterion whereas the criterion of elevation with a 0.017 (1.7%) score was considered the least important. Southern Thailand is a well‐suited area for solar‐based green hydrogen production with a 4302 km2 area of high suitability and a 3350 km2 area of moderate suitability. These suitable areas can be utilized to develop the green hydrogen industry of Thailand and the method developed can be employed for the assessment of green hydrogen potential in other parts of the country. Studies like these are vital for the development of green hydrogen road maps for Thailand to develop its hydrogen policy and promote investments in the sector.
Value of Power-to-gas as a Flexibility Option in Integrated Electricity and Hydrogen Markets
Oct 2021
Publication
This paper analyzes the economic potential of Power-to-Gas (PtG) as a source of flexibility in electricity markets with both high shares of renewables and high external demand for hydrogen. The contribution of this paper is that it develops and applies a short-term (hourly) partial equilibrium model of integrated electricity and hydrogen markets including markets for green certificates while using a welfare-economic framework to assess the market outcomes. We find that strongly increasing the share of renewable electricity makes electricity prices much more volatile while the presence of PtG reduces this price volatility. However a large demand for hydrogen from outside the electricity sector reduces the impact of PtG on the volatility of electricity prices. In a scenario with a high external hydrogen demand PtG can deliver positive benefits for some groups as it can provide hydrogen at lower costs than Steam Methane Reforming (SMR) during hours when electricity prices are low but these positive welfare effects are outweighed by the fixed costs of PtG assets plus the costs of replacing a less expensive energy carrier (natural gas) with a more expensive one (hydrogen). Investments in PtG are profitable from a social-welfare perspective when the induced reduction in carbon emissions is valued at 150–750 euro/ton. Hence at lower carbon prices PtG can only become a valuable provider of flexibility when installation costs are significantly reduced and conversion efficiencies of electrolysers increased.
Methanol Synthesis Using Captured CO2 as Raw Material: Techno-economic and Environmental Assessment
Aug 2015
Publication
The purpose of this paper is to assess via techno-economic and environmental metrics the production of methanol (MeOH) using H2 and captured CO2 as raw materials. It evaluates the potential of this type of carbon capture and utilisation (CCU) plant on (i) the net reduction of CO2 emissions and (ii) the cost of production in comparison with the conventional synthesis process of MeOH Europe. Process flow modelling is used to estimate the operational performance and the total purchased equipment cost; the flowsheet is implemented in CHEMCAD and the obtained mass and energy flows are utilised as input to calculate the selected key performance indicators (KPIs). CO2 -based metrics are used to assess the environmental impact. The evaluated MeOH plant produces 440 ktMeOH/yr and its configuration is the result of a heat integration process. Its specific capital cost is lower than for conventional plants. However raw materials prices i.e. H2 and captured CO2 do not allow such a project to be financially viable. In order to make the CCU plant financially attractive the price of MeOH should increase in a factor of almost 2 or H2 costs should decrease almost 2.5 times or CO2 should have a value of around 222 €/t under the assumptions of this work. The MeOH CCU-plant studied can utilise about 21.5% of the CO2 emissions of a pulverised coal (PC) power plant that produces 550MWnet of electricity. The net CO2 emissions savings represent 8% of the emissions of the PC plant (mainly due to the avoidance of consuming fossil fuels as in the conventional MeOH synthesis process). The results demonstrate that there is a net but small potential for CO2 emissions reduction; assuming that such CCU plants are constructed in Europe to meet the MeOH demand growth and the quantities that are currently imported the net CO2 emissions reduction could be of 2.71 MtCO2/yr.
Influence of Hydrogen Environment on Fatigue Fracture Morphology of X80 Pipeline Steel
Dec 2022
Publication
The rapid development of hydrogen energy requires the use of natural gas infrastructure for hydrogen transportation. It is very important to study hydrogen-added natural gas transportation technology which is a key way to rapidly develop coal-based gas and renewable energy. This study aims to study the influence of X80 pipeline steel's fatigue performance in hydrogen environment and perform fatigue tests on notched round rod specimens under different hydrogen concentration. The experimental results show that hydrogen seriously affects the fatigue life of pipeline steel. After reaching a certain hydrogen concentration as the hydrogen concentration continues to increase the fatigue life decreases gradually. Combined with SEM analysis of fracture morphology the decrease in the size and density of the dimples reduces the displacement amplitude while the increase in the planar area increases the displacement during fatigue fracture due to accelerated crack propagation. From this study we can know the influence of hydrogen concentration on the fracture morphology of pipeline steel which provides an understanding of the effect of hydrogen on fatigue fracture morphology and a broader safety analysis.
Everything About Hydrogen Podcast: Masters of Scale: The World of SOFC & SOE Technologies
Oct 2020
Publication
On this week's episode the EAH team catches up with Mark Selby Chief Technology Officer at Ceres Power to dive into the world of solid oxide fuel cell (SOFC) and solid oxide electrolyzer (SOE) technologies. Ceres Power specializes in the design of SOFCs for applications in a diverse range of energy intensive sectors. Mark takes the time in this episode to walk the team through the details advantages and challenges of deploying SOFCs and low-carbon hydrogen solutions more broadly and discusses how consumer and customer awareness of these technologies varies widely across international markets. We cover a lot of ground this week so be sure not to miss out on our conversation with Mark!
The podcast can be found on their website
The podcast can be found on their website
Everything About Hydrogen Podcast: Hydrogen News Roundup and Hydrogen Q&A
Jun 2020
Publication
This week on the show the team take a pause to review the current state of hydrogen and fuel cell affairs globally whilst taking time to go over all the excellent questions that our listeners have kindly shared with us over the last few months. We cover carbon capture the green new deal synthetic fuels hydrogenspiders green hydrogen in Australia and many more themes this week so don’t miss this episode!
The podcast can be found on their website
The podcast can be found on their website
Scenario-Based Comparative Analysis for Coupling Electricity and Hydrogen Storage in Clean Oilfield Energy Supply System
Mar 2022
Publication
In response to the objective of fully attaining carbon neutrality by 2060 people from all walks of life are pursuing low-carbon transformation. Due to the high water cut in the middle and late phases of development the oilfield’s energy consumption will be quite high and the rise in energy consumption will lead to an increase in carbon emission at the same time. As a result the traditional energy model is incapable of meeting the energy consumption requirement of high water cut oilfields in their middle and later phases of development. The present wind hydrogen coupling energy system was researched and coupled with the classic dispersed oilfield energy system to produce energy for the oilfields in this study. This study compares four future energy system models to existing ones computes the energy cost and net present value of an oilfield in Northwest China and proposes a set of economic evaluation tools for oilfield energy systems. The study’s findings indicate that scenario four provides the most economic and environmental benefits. This scenario effectively addresses the issue of high energy consumption associated with aging oilfields at this point significantly reduces carbon emissions absorbs renewable energy locally and reduces the burden on the power grid system. Finally sensitivity analysis is utilized to determine the effect of wind speed electricity cost and oilfield gas output on the system’s economic performance. The results indicate that the system developed in this study can be applied to other oilfields.
Hydrogen Non-premixed Combustion in Enclosure with One Vent and Sustained Release: Numerical Experiments
Sep 2013
Publication
Numerical experiments are performed to understand different regimes of hydrogen non-premixed combustion in an enclosure with passive ventilation through one horizontal or vertical vent located at the top of a wall. The Reynolds averaged Navier–Stokes (RANS) computational fluid dynamics (CFD) model with a reduced chemical reaction mechanism is described in detail. The model is based on the renormalization group (RNG) k-ε turbulence model the eddy dissipation concept (EDC) model for simulation of combustion coupled with the 18-step reduced chemical mechanism (8 species) and the in-situ adaptive tabulation (ISAT) algorithm that accelerates the reacting flow calculations by two to three orders of magnitude. The analysis of temperature and species (hydroxyl hydrogen oxygen water) concentrations in time as well as the velocity through the vent shed a light on regimes and dynamics of indoor hydrogen fires. A well-ventilated fire is simulated in the enclosure at a lower release flow rate and complete combustion of hydrogen within the enclosure. Fire becomes under-ventilated at higher release flow rates with two different modes observed. The first mode is the external flame stabilised at the enclosure vent at moderate release rates and the second mode is the self-extinction of combustion inside and outside the enclosure at higher hydrogen release rates. The simulations demonstrated a complex reacting flow dynamics in the enclosure that leads to formation of the external flame or the self-extinction. The air intake into the enclosure at later stages of the process through the whole vent area is a characteristic feature of the self-extinction regime. This air intake is due to faster cooling of hot combustion products by sustained colder hydrogen leak compared to the generation of hot products by the ceasing chemical reactions inside the enclosure and hydrogen supply. In general an increase of hydrogen sustained release flow rate will change fire regime from the well-ventilated combustion within the enclosure through the external flame stabilised at the vent and finally to the self-extinction of combustion throughout the domain.
Achieving Net Zero Electricity Sectors in G7 Members
Oct 2021
Publication
Achieving Net Zero Electricity Sectors in G7 Members is a new report by the International Energy Agency that provides a roadmap to driving down CO2 emissions from electricity generation to net zero by 2035 building on analysis in Net Zero by 2050: A Roadmap for the Global Energy Sector.
The new report was requested by the United Kingdom under its G7 Presidency and followed the G7 leaders’ commitment in June 2021 to reach “an overwhelmingly decarbonised” power system in the 2030s and net zero emissions across their economies no later than 2050. It is designed to inform policy makers industry investors and citizens in advance of the COP26 Climate Change Conference in Glasgow that begins at the end of October 2021.
Starting from recent progress and the current state of play of electricity in the G7 the report analyses the steps needed to achieve net zero emissions from electricity and considers the wider implications for energy security employment and affordability. It identifies key milestones emerging challenges and opportunities for innovation.
The report also underscores how G7 members can foster innovation through international collaboration and as first movers lower the cost of technologies for other countries while maintaining electricity security and placing people at the centre of clean energy transitions.
Link to their website
The new report was requested by the United Kingdom under its G7 Presidency and followed the G7 leaders’ commitment in June 2021 to reach “an overwhelmingly decarbonised” power system in the 2030s and net zero emissions across their economies no later than 2050. It is designed to inform policy makers industry investors and citizens in advance of the COP26 Climate Change Conference in Glasgow that begins at the end of October 2021.
Starting from recent progress and the current state of play of electricity in the G7 the report analyses the steps needed to achieve net zero emissions from electricity and considers the wider implications for energy security employment and affordability. It identifies key milestones emerging challenges and opportunities for innovation.
The report also underscores how G7 members can foster innovation through international collaboration and as first movers lower the cost of technologies for other countries while maintaining electricity security and placing people at the centre of clean energy transitions.
Link to their website
Different Scenarios of Electric Mobility: Current Situation and Possible Future Developments of Fuel Cell Vehicles in Italy
Jan 2020
Publication
The diffusion of electric vehicles in Italy has started but some complications weight its spread. At present hybrid technology is the most followed by users due particularly to socioeconomic factors such as cost of investment and range anxiety. After a deep discussion of the Italian scenario the aim of the paper is to recognize whether fuel cell technology may be an enabling solution to overcome pollution problems and respect for the environment. The opportunity to use fuel cells to store electric energy is quite fascinating—the charging times will be shortened and heavy passenger transport should be effortless challenged. On the basis of the present history and by investigating the available information this work reports the current e-mobility state in Italy and forecasts the cities in which a fuel cell charging infrastructure should be more profitable with the intention of granting a measured outlook on the plausible development of this actual niche market.
Water Photo-Oxidation Reaction on Clean and Doped Two-Dimensional Graphitic C2N
Apr 2020
Publication
In the search for new efficient photo-catalysts for hydrogen production through water splitting the main attention has been paid to tuning the band gap width and its position with respect to vacuum level. However actual electro-catalytic activity for the water oxidation reaction on a catalyst surface is no less important than those quantities. In this work we evaluate from first principles the thermodynamics of the reaction on relatively new candidates for water splitting: two-dimensional C2N and that doped with phosphorus. We find that the 4-step reaction usually expected for water splitting will not proceed on these systems resulting in oxygen atoms left strongly adsorbed to the surface. Another option a 3-step reaction is also found to be unfavorable. We also test an effect of higher oxygen coverage on the reaction thermodynamics as suggested elsewhere. We find that indeed the doubled O-coverage makes the 4-step reaction feasible for the doped C2N. However an unacceptably high anode potential is required to make this reaction proceed. We thus conclude that the materials under consideration may not be efficient electro-catalysts for water splitting.
Life Cycle Assessment of Hydrogen from Proton Exchange Membrane Water Electrolysis in Future Energy Systems
Jan 2019
Publication
This study discusses the potential of H2 production by proton exchange membrane water electrolysis as an effective option to reduce greenhouse gas emissions in the hydrogen sector. To address this topic a life cycle assessment is conducted to compare proton exchange membrane water electrolysis versus the reference process - steam methane reforming. As a relevant result we show that hydrogen production via proton exchange membrane water electrolysis is a promising technology to reduce CO2 emissions of the hydrogen sector by up to 75% if the electrolysis system runs exclusively on electricity generated from renewable energy sources. In a future (2050) base-load operation mode emissions are comparable to the reference system.
The results for the global warming potential show a strong reduction of greenhouse gas emissions by 2050. The thoroughly and in-depth modelled components of the electrolyser have negligible influence on impact categories; thus emissions are mainly determined by the electricity mix. With 2017 electricity mix of Germany the global warming potential corresponds to 29.5 kg CO2 eq. for each kg of produced hydrogen. Referring to the electricity mix we received from an energy model emissions can be reduced to 11.5 kg CO2 eq. in base-load operation by the year 2050. Using only the 3000 h of excess power from renewables in a year will allow for the reduction of the global warming potential to 3.3 kg CO2 eq. From this result we see that an environmentally friendly electricity mix is crucial for reducing the global warming impact of electrolytic hydrogen.
The results for the global warming potential show a strong reduction of greenhouse gas emissions by 2050. The thoroughly and in-depth modelled components of the electrolyser have negligible influence on impact categories; thus emissions are mainly determined by the electricity mix. With 2017 electricity mix of Germany the global warming potential corresponds to 29.5 kg CO2 eq. for each kg of produced hydrogen. Referring to the electricity mix we received from an energy model emissions can be reduced to 11.5 kg CO2 eq. in base-load operation by the year 2050. Using only the 3000 h of excess power from renewables in a year will allow for the reduction of the global warming potential to 3.3 kg CO2 eq. From this result we see that an environmentally friendly electricity mix is crucial for reducing the global warming impact of electrolytic hydrogen.
Analysis of Hydrogen in Inorganic Materials and Coatings: A Critical Review
Jun 2021
Publication
The currently used bulk analysis and depth profiling methods for hydrogen in inorganic materials and inorganic coatings are reviewed. Bulk analysis of hydrogen is based on fusion of macroscopic samples in an inert gas and the detection of the thereby released gaseous H2 using inert gas fusion (IGF) and thermal desorption spectroscopy (TDS). They offer excellent accuracy and sensitivity. Depth profiling methods involve glow discharge optical emission spectroscopy and mass spectrometry (GDOES and GDMS) laser-induced breakdown spectroscopy (LIBS) secondary ion mass spectrometry (SIMS) nuclear reaction analysis (NRA) and elastic recoil detection analysis (ERDA). The principles of all these methods are explained in terms of the methodology calibration procedures analytical performance and major application areas. The synergies and the complementarity of various methods of hydrogen analysis are described. The existing literature about these methods is critically evaluated and major papers concerning each method are listed.
Analysis of the Existing Barriers for the Market Development of Power to Hydrogen (P2H) in Italy
Sep 2020
Publication
New technological solutions are required to control the impact of the increasing presence of renewable energy sources connected to the electric grid that are characterized by unpredictable production (i.e. wind and solar energy). Energy storage is becoming essential to stabilize the grid when a mismatch between production and demand occurs. Among the available solutions Power to Hydrogen (P2H) is one of the most attractive options. However despite the potential many barriers currently hinder P2H market development. The literature reports general barriers and strategies to overcome them but a specific analysis is fundamental to identifying how these barriers concretely arise in national and regional frameworks since tailored solutions are needed to foster the development of P2H local market. The paper aims to identify and to analyze the existing barriers for P2H market uptake in Italy. The paper shows how several technical regulatory and economic issues are still unsolved resulting in a source of uncertainty for P2H investment. The paper also suggests possible approaches and solutions to address the Italian barriers and to support politics and decision-makers in the definition and implementation of the national hydrogen strategy.
EU Hydrogen Strategy: A Case for Urgent Action Towards Implementation
Jul 2020
Publication
Interest in hydrogen as one route to the decarbonisation of energy systems has risen rapidly over the past few years with the publication of a number of hydrogen strategies from countries across the global energy economy. The momentum in Europe has increased sharply this month with the publication of an EU strategy to incorporate hydrogen into its plans for a net zero emission future. This Comment reviews the key elements of this strategy and provides an initial commentary on the main goals. We highlight the challenges that will be faced in meeting hydrogen production targets in particular via the “green hydrogen” route and analyse the plans for expanding the consumption of hydrogen in Europe. We also assess the infrastructure questions that will need to be answered if and when hydrogen takes on a greater role in the region and note the extensive state support that will be needed in the early years of the implementation of the strategy. Despite this though we applaud the ambition laid out by the EU and look forward to the provision of more detailed plans over the coming months and years.
Link to document on OIES website
Link to document on OIES website
Artificial Intelligence-Based Machine Learning toward the Solution of Climate-Friendly Hydrogen Fuel Cell Electric Vehicles
Jul 2022
Publication
The rapid conversion of conventional powertrain technologies to climate-neutral new energy vehicles requires the ramping of electrification. The popularity of fuel cell electric vehicles with improved fuel economy has raised great attention for many years. Their use of green hydrogen is proposed to be a promising clean way to fill the energy gap and maintain a zero-emission ecosystem. Their complex architecture is influenced by complex multiphysics interactions driving patterns and environmental conditions that put a multitude of power requirements and boundary conditions around the vehicle subsystems including the fuel cell system the electric motor battery and the vehicle itself. Understanding its optimal fuel economy requires a systematic assessment of these interactions. Artificial intelligence-based machine learning methods have been emerging technologies showing great potential for accelerated data analysis and aid in a thorough understanding of complex systems. The present study investigates the fuel economy peaks during an NEDC in fuel cell electric vehicles. An innovative approach combining traditional multiphysics analyses design of experiments and machine learning is an effective blend for accelerated data supply and analysis that accurately predicts the fuel consumption peaks in fuel cell electric vehicles. The trained and validated models show very accurate results with less than 1% error.
Numerical Study on Shockwave Attenuation by Water Mist in Confined Spaces
Sep 2021
Publication
Hydrogen safety has become the first consideration especially after fuel cell automobiles were pushed into commercial auto market. Tunnels are important parts of traffic infrastructure featured in confinement or semi-confinement. Hydrogen detonation is a potential accident scenario while hydrogen fuel cell vehicles are operated in a traffic tunnel with a confined space. Pressure shockwaves are mostly produced by hydrogen detonation and propagate along the tunnel. As a designed safety measure water mist injection is hopefully to mitigate the pressure loads of such shocks. To model the interaction between shockwaves and water droplets a droplet breakup model has been developed for the COM3D code which is a highly validated three-dimensional hydrogen explosion simulation code. By using the model the hydrogen detonation shockwave propagation in confined volumes is simulated in the study. The attenuation effects of water mist on the pressure shocks in the simulations are elaborated and discussed based on the simulation results.
Sustainable Offshore Oil and Gas Fields Development: Techno-economic Feasibility Analysis of Wind–hydrogen–natural Gas Nexus
Jul 2021
Publication
Offshore oil and gas field development consumes quantities of electricity which is usually provided by gas turbines. In order to alleviate the emission reduction pressure and the increasing pressure of energy saving governments of the world have been promoting the reform of oil and gas fields for years. Nowadays environmentally friendly alternatives to provide electricity are hotspots such as the integration of traditional energy and renewable energy. However the determination of system with great environmental and economic benefits is still controversial. This paper proposed a wind– hydrogen–natural gas nexus (WHNGN) system for sustainable offshore oil and gas fields development. Combining the optimization model with the techno-economic evaluation model a comprehensive evaluation framework is established for techno-economic feasibility analysis. In addition to WHNGN system another two systems are designed for comparison including the traditional energy supply (TES) system and wind–natural gas nexus (WNGN) system. An offshore production platforms in Bohai Bay in China is taken as a case and the results indicate that: (i) WNGN and WHNGN systems have significant economic benefits total investment is decreased by 5190 and 5020 million $ respectively and the WHNGN system increases 4174 million $ profit; (ii) WNGN and WHNGN systems have significant environmental benefits annual carbon emission is decreased by 15 and 40.2 million kg respectively; (iii) the system can be ranked by economic benefits as follows: WHNGN >WNGN > TES; and (iV) the WHNGN system is more advantageous in areas with high hydrogen and natural gas sales prices such as China Kazakhstan Turkey India Malaysia and Indonesia.
Current Legislative Framework for Green Hydrogen Production by Electrolysis Plants in Germany
Mar 2022
Publication
(1) The German energy system transformation towards an entirely renewable supply is expected to incorporate the extensive use of green hydrogen. This carbon-free fuel allows the decarbonization of end-use sectors such as industrial high-temperature processes or heavy-duty transport that remain challenging to be covered by green electricity only. However it remains unclear whether the current legislative framework supports green hydrogen production or is an obstacle to its rollout. (2) This work analyzes the relevant laws and ordinances regarding their implications on potential hydrogen production plant operators. (3) Due to unbundling-related constraints potential operators from the group of electricity transport system and distribution system operators face lacking permission to operate production plants. Moreover ownership remains forbidden for them. The same applies to natural gas transport system operators. The case is less clear for natural gas distribution system operators where explicit regulation is missing. (4) It is finally analyzed if the production of green hydrogen is currently supported in competition with fossil hydrogen production not only by the legal framework but also by the National Hydrogen Strategy and the Amendment of the Renewable Energies Act. It can be concluded that in recent amendments of German energy legislation regulatory support for green hydrogen in Germany was found. The latest legislation has clarified crucial points concerning the ownership and operation of electrolyzers and the treatment of green hydrogen as a renewable energy carrier.
Everything About Hydrogen Podcast: Back to a Hydrogen Future?
Mar 2020
Publication
On this weeks episode the team are talking all things hydrogen with Mark Neller Director at Arup. On the show we discuss the UK’s Hydrogen4Heat program where Arup has been leading the UK government’s work on the safety and practical considerations that are necessary to examine whether hydrogen could be a serious solutions for decarbonising UK residential commercial and industry heat. We also discuss the Nikola Badger the need for system wide planning when considering decarbonisation pathways for heat. All this and more on the show!
The podcast can be found on their website
The podcast can be found on their website
Hydrogen Generation on Orkney: Integrating Established Risk Management Best Practice to Emerging Clean Energy Sector
Sep 2021
Publication
The European Marine Energy Centre’s (EMEC) ITEG project (Integrating Tidal Energy into the European Grid) funded by Interreg NWE combines a tidal energy and hydrogen production solution to address grid constraints on the island of Eday in Orkney. The project will install a 0.5MW electrolyser at EMEC’s existing hydrogen production plant. EMEC and Risktec collaboratively applied best practice risk assessment and management techniques to assess and manage hydrogen safety. Hazard identification (HAZID) workshops were conducted collaboratively with design engineers through which a comprehensive hazard register was developed. Risktec applied bowtie analysis to each major accident hazard identified from the hazard register via virtual workshop with design engineers. The bowties promoted a structured review of each hazard’s threat and consequence identifying and reviewing the controls in place against good practice standards. The process revealed some recommendations for further improvement and risk reduction exemplifying a systematic management of risks associated with hydrogen hazards to as low as reasonably practicable (ALARP). Hardware based barriers preventing or mitigating loss of control of these hazards were logged as safety critical elements (SCE) and procedural barriers as safety critical activities (SCA). To ensure that all SCEs and SCAs identified through the risk assessment process are managed throughout the facility’s operational lifetime a safety management system is created giving assurance of overall safety management system continued effectiveness. The process enables the demonstration that design risks are managed to ALARP during design and throughout operational lifetime. More importantly enabling ITEG to progress to construction and operation in 2021.
Future of Hydrogen as an Alternative Fuel for Next-Generation Industrial Applications; Challenges and Expected Opportunities
Jun 2022
Publication
A general rise in environmental and anthropogenically induced greenhouse gas emissions has resulted from worldwide population growth and a growing appetite for clean energy industrial outputs and consumer utilization. Furthermore well-established advanced and emerging countries are seeking fossil fuel and petroleum resources to support their aviation electric utilities industrial sectors and consumer processing essentials. There is an increasing tendency to overcome these challenging concerns and achieve the Paris Agreement’s priorities as emerging technological advances in clean energy technologies progress. Hydrogen is expected to be implemented in various production applications as a fundamental fuel in future energy carrier materials development and manufacturing processes. This paper summarizes recent developments and hydrogen technologies in fuel refining hydrocarbon processing materials manufacturing pharmaceuticals aircraft construction electronics and other hydrogen applications. It also highlights the existing industrialization scenario and describes prospective innovations including theoretical scientific advancements green raw materials production potential exploration and renewable resource integration. Moreover this article further discusses some socioeconomic implications of hydrogen as a green resource.
Domestic Gas Meter Durability in Hydrogen and Natural Gas Mixtures
Nov 2021
Publication
Blending hydrogen into the natural gas infrastructure is becoming a very promising practice to increase the exploitation of renewable energy sources which can be used to produce “green” hydrogen. Several research projects and field experiments are currently aimed at evaluating the risks associated with utilization of the gas blend in end-use devices such as the gas meters. In this paper the authors present the results of experiments aimed at assessing the effect of hydrogen injection in terms of the durability of domestic gas meters. To this end 105 gas meters of different measurement capabilities and manufacturers both brand-new and withdrawn from service were investigated in terms of accuracy drift after durability cycles of 5000 and 10000 h with H2NG mixtures and H2 concentrations of 10% and 15%. The obtained results show that there is no metrologically significant or statistically significant influence of hydrogen content on changes in gas meter indication errors after subjecting the meters to durability testing with a maximum of 15% H2 content over 10000 h. A metrologically significant influence of the long-term operation of the gas meters was confirmed but it should not be made dependent on the hydrogen content in the gas. No safety problems related to the loss of external tightness were observed for either the new or 10-year-old gas meters.
Research on Hydrogen Consumption and Driving Range of Hydrogen Fuel Cell Vehicle under the CLTC-P Condition
Dec 2021
Publication
Hydrogen consumption and mileage are important economic indicators of fuel cell vehicles. Hydrogen consumption is the fundamental reason that restricts mileage. Since there are few quantitative studies on hydrogen consumption during actual vehicle operation the high cost of hydrogen consumption in outdoor testing makes it impossible to guarantee the accuracy of the test. Therefore this study puts forward a test method based on the hydrogen consumption of fuel cell vehicles under CLTC-P operating conditions to test the hydrogen consumption of fuel cell vehicles per 100 km. Finally the experiment shows that the mileage calculated by hydrogen consumption has a higher consistency with the actual mileage. Based on this hydrogen consumption test method the hydrogen consumption can be accurately measured and the test time and cost can be effectively reduced.
Progress in Reducing Emissions in Scotland: 2021 Report to Parliament
Dec 2021
Publication
This is the tenth annual Progress Report to the Scottish Parliament as required by the Climate Change (Scotland) Act 2009. This year’s report shows that in 2019 Scotland’s greenhouse emissions fell by 2% compared to 2018 and are now 44% below 1990 levels. The reductions were largely driven by the manufacturing and construction and fuel supply sectors with electricity generation remaining the biggest driver of emissions cuts over the past decade (2009-2019). The potential for further emissions savings from electricity generation has however largely run out.
The focus must now shift to ensuring that rapid emissions reductions are delivered with no further delay to allow Scotland to meet its legislated 2030 target.
This report and other reports by the Climate Change Committee can be downloaded on their website.
The focus must now shift to ensuring that rapid emissions reductions are delivered with no further delay to allow Scotland to meet its legislated 2030 target.
This report and other reports by the Climate Change Committee can be downloaded on their website.
Assessment and Lessons Learnt from HIAD 2.0 – Hydrogen Incidents and Accidents Database
Sep 2019
Publication
The Hydrogen Incidents and Accidents Database (HIAD) is an international open communication platform collecting systematic data on hydrogen-related undesired events (incidents or accidents). It was initially developed in the frame of the project HySafe an EC co-funded NoE of the 6th Frame Work Programme by the Joint Research Centre of the European Commission (EC-JRC) and populated by many HySafe partners. After the end of the project the database has been maintained and populated by JRC with publicly available events.<br/>Starting from June 2016 JRC has been developing a new version of the database (HIAD 2.01). With the support of the Fuel Cells and Hydrogen 2 Joint Undertaking (FCH 2 JU) the structure of the database and the web-interface have been redefined and simplified resulting in a streamlined user interface compared to the previous version of HIAD. The new version is mainly focused to facilitate the sharing of lessons learnt and other relevant information related to hydrogen technology; the database is publicly released and the events are anonymized. The database currently contains over 250 events. It aims to contribute to improve the safety awareness fostering the users to benefit from the experiences of others as well as to share information from their own experiences.<br/>The FCH 2 JU launched the European Hydrogen Safety Panel (EHSP2) initiative in 2017. The mission of the EHSP is to assist the FCH 2 JU at both programme and project level in assuring that hydrogen safety is adequately managed and to promote and disseminate hydrogen safety culture within and outside of the FCH 2 JU programme. Composed of a multidisciplinary pool of experts – 16 experts in 2018 - the EHSP is grouped in small ad-hoc working groups (task forces) according to the tasks to be performed and the expertise required. In 2018 Task Force 3 (TF3) of the ESHP has encompassed the analysis of safety data and events contained in HIAD 2.0 operated by JRC and supported by the FCH 2 JU. In close collaboration with JRC the EHSP members have systematically reviewed more than 250 events.<br/>This report summarizes the lessons learnt stemmed from this assessment. The report is self-explanatory and hence includes brief introduction about HIAD 2.0 the assessment carried out by the EHSP and the results stemmed from the joint assessment to enable new readers without prior knowledge of HIAD 2.0 to understand the rationale of the overall exercise and the lessons learnt from this effort. Some materials have also been lifted from the joint paper between JRC and EHSP which will also be presented at the International Conference on Hydrogen Safety (ICHS 2019) to provide some general and specific information about HIAD 2.0.
H21- Consumer and Gas Network Metering Phase 1: A Review of the Worldwide Hydrogen Meter Technologies and Applications
Feb 2018
Publication
There is no inherent property of hydrogen that makes it unsuitable for metering at distribution or transmission pressures. Towns gas containing large percentages of hydrogen was used for many years in the UK and continues to be in use in Hong Kong and Singapore. Many manufacturers sell their ordinary mechanical gas meters as suitable for hydrogen in a laboratory or industrial situation; unfortunately lack of demand has meant that none of these meters seem to have certified under appropriate metering regulations for gaseous hydrogen (e.g. the Measuring Instruments Directive)<br/>Some of the more sophisticated modern inferential meters (e.g. thermal or ultrasonic) currently designed specifically for natural gas (or LPG if suitably calibrated) are likely to unsuitable for repurposing directly to hydrogen but none of the problems appear fundamental or insuperable. The largest potential hurdle probably surrounds the physical size of current meters. A hydrogen appliance will consume about 3.3 more hydrogen than natural gas (on a volumetric basis) and using traditional designs this would have been measured through a meter probably too large to fit within an existing meter box. Unless unsolved such an increase in size would add materially to any hydrogen re-purposing programme.<br/>The meter trade thus need to be challenged to come up with a hydrogen meter that is the same physical size as a natural gas meter on a power rating basis (i.e. in kW). Ultrasonic and thermal mass meters should be included in the necessary Research and Development programme.<br/>A meter test programme is suggested that will provide evidence to meter manufacturers that the metering of hydrogen is not inherently difficult and thus convince them to make the necessary investments and/or approach the GDNO’s for assistance with such a programme.
HyDeploy Report: Trial Management
Aug 2018
Publication
The trial management philosophy of HyDeploy has been developed to enable the overall objectives of the project to be achieved; the safe demonstration of operating a Gas Distribution Network (GDN) on a blend of natural gas and hydrogen. This document provides an overview of the management and governance processes associated with the trial itself. The operational and safety related undertakings before during and after the trial are summarised within this report as well as the intrial experimental programme. The detailed operational procedures are covered in HyD-Rep09.<br/>The programme structure of HyDeploy consists of three phases: Phase 1: Enabling work for preparation of GS(M)R Exemption Phase 2: Construction and installation of process equipment and Phase 3: Safe injection of hydrogen – the trial.<br/>This report focuses on Phase 3 which has two parts; the Proving Trial and; the Trial. As Statutory Duty Holder Keele is accountable for operation of the network it owns over the course of the trial. Operation and maintenance of the network will be undertaken according to the provisions of the Exemption on the basis of agreed revised procedures (HyD-Rep09) by Keele and Cadent. A governance process is in place to manage the blending of hydrogen into the network. This isdescribed in Sections 2 and 3.<br/>Safety related undertakings will be actioned before during and after the trial to mitigate risks identified through the house-to-house testing (HyD-Rep06) procedural review (HyD-Rep09) and quantitative risk assessment (HyD-Rep02). This scope of the undertakings includes actions associated with the end appliances the network itself and the process equipment to be installed.<br/>The detail of these undertakings is given in Section 4.<br/>As part of the trial an experimental programme has been designed to provide further evidence relating to the interactions of a hydrogen blend on network materials and end appliances. The experimental programme is detailed in Section 5.<br/>Click the supplements tab to see the other documents from this report
Electrochemical Conversion Technologies for Optimal Design of Decentralized Multi-energy Systems: Modeling Framework and Technology Assessment
Apr 2018
Publication
The design and operation of integrated multi-energy systems require models that adequately describe the behavior of conversion and storage technologies. Typically linear conversion performance or fixed data from technology manufacturers are employed especially for new or advanced technologies. This contribution provides a new modeling framework for electrochemical devices that bridges first-principles models to their simplified implementation in the optimization routine. First thermodynamic models are implemented to determine the on/off-design performance and dynamic behavior of different types of fuel cells and of electrolyzers. Then as such nonlinear models are intractable for use in the optimization of integrated systems different linear approximations are developed. The proposed strategies for the synthesis of reduced order models are compared to assess the impact of modeling approximations on the optimal design of multi-energy systems including fuel cells and electrolyzers. This allows to determine the most suitable level of detail for modeling the underlying electrochemical technologies from an integrated system perspective. It is found that the approximation methodology affects both the design and operation of the system with a significant effect on system costs and violation of the thermal energy demand. Finally the optimization and technology modeling framework is exploited to determine guidelines for the installation of the most suitable fuel cell technology in decentralized multi-energy systems. We show how the installation costs of PEMFC SOFC and MCFC their electrical and thermal efficiencies their conversion dynamics and the electricity price affect the system design and technology selection.
Future Electricity Series Part 1 - Power from Fossil Fuels
Apr 2013
Publication
Power from Fossil Fuels analyses the role of coal and gas power generation in the UK's future power generation mix. It is the first of three reports in Carbon Connect's 2013 research inquiry the Future Electricity Series which examines what role fossil fuels renewables and nuclear can play in providing secure sustainable and affordable electricity in the UK. The report finds that significantly decarbonising the power sector by 2030 will prove the most successful strategy on energy sustainability security and affordability grounds and that switching the UK’s reliance on coal to gas generation - while using fossil fuel power stations increasingly for backup purposes - will be the most viable method of achieving this. The independent report chaired by former energy minister Charles Hendry MP and Opposition Energy and Climate Change Spokesperson in the House of Lords Baroness Worthington was compiled between January and April 2013 and received contributions from over 30 experts in academia industry Parliament and Government and was launched in Parliament on the 22nd April 2013. This independent inquiry was sponsored by the Institution of Gas Engineers and Managers
Numerical Study on Optics and Heat Transfer of Solar Reactor for Methane Thermal Decomposition
Oct 2021
Publication
This study aims to reduce greenhouse gas emissions to the atmosphere and effectively utilize wasted resources by converting methane the main component of biogas into hydrogen. Therefore a reactor was developed to decompose methane into carbon and hydrogen using solar thermal sources instead of traditional energy sources such as coal and petroleum. The optical distributions were analyzed using TracePro a Monte Carlo ray-tracing-based program. In addition Fluent a computational fluid dynamics program was used for the heat and mass transfer and chemical reaction. The cylindrical indirect heating reactor rotates at a constant speed to prevent damage by the heat source concentrated at the solar furnace. The inside of the reactor was filled with a porous catalyst for methane decomposition and the outside was surrounded by insulation to reduce heat loss. The performance of the reactor according to the cavity model was calculated when solar heat was concentrated on the reactor surface and methane was supplied into the reactor in an environment with a solar irradiance of 700 W/m2 wind speed of 1 m/s and outdoor temperature of 25 °C. As a result temperature methane mass fraction distribution and heat loss amounts for the two cavities were obtained and it was found that the effect on the conversion rate was largely dependent on a temperature over 1000 °C in the reactor. Moreover the heat loss of the full-cavity model decreased by 12.5% and the methane conversion rate increased by 33.5% compared to the semi-cavity model. In conclusion the high-temperature environment of the reactor has a significant effect on the increase in conversion rate with an additional effect of reducing heat loss.
Intermetallic Compounds Synthesized by Mechanical Alloying for Solid-State Hydrogen Storage: A Review
Sep 2021
Publication
Hydrogen energy is a very attractive option in dealing with the existing energy crisis. For the development of a hydrogen energy economy hydrogen storage technology must be improved to over the storage limitations. Compared with traditional hydrogen storage technology the prospect of hydrogen storage materials is broader. Among all types of hydrogen storage materials solid hydrogen storage materials are most promising and have the most safety security. Solid hydrogen storage materials include high surface area physical adsorption materials and interstitial and non-interstitial hydrides. Among them interstitial hydrides also called intermetallic hydrides are hydrides formed by transition metals or their alloys. The main alloy types are A2B AB AB2 AB3 A2B7 AB5 and BCC. A is a hydride that easily forms metal (such as Ti V Zr and Y) while B is a non-hydride forming metal (such as Cr Mn and Fe). The development of intermetallic compounds as hydrogen storage materials is very attractive because their volumetric capacity is much higher (80–160 kgH2m−3 ) than the gaseous storage method and the liquid storage method in a cryogenic tank (40 and 71 kgH2m−3 ). Additionally for hydrogen absorption and desorption reactions the environmental requirements are lower than that of physical adsorption materials (ultra-low temperature) and the simplicity of the procedure is higher than that of non-interstitial hydrogen storage materials (multiple steps and a complex catalyst). In addition there are abundant raw materials and diverse ingredients. For the synthesis and optimization of intermetallic compounds in addition to traditional melting methods mechanical alloying is a very important synthesis method which has a unique synthesis mechanism and advantages. This review focuses on the application of mechanical alloying methods in the field of solid hydrogen storage materials.
The Hydrogen Grand Challenge
Apr 2016
Publication
More than 90% of the world’s growing energy demand is satisfied by fossil fuels (BP Statistical Review … 2015)1. One consequence of the unrestrained use of this technology is the continuous increase of the CO2 level of the atmosphere2. There are also the challenges associated with the limitations of the corresponding resources (Hubbert 1956; BP Statistical Review … 2015). Climate change as a consequence of the growing CO2 level (see text footnote 2 ESRL Global Monitoring Division 2015) has been identified as one of the most critical challenges facing mankind and requires immediate action: “The Paris Agreement aims to strengthen the global response to the threat of climate change ( … ) by low greenhouse gas emissions development in a manner that does not threaten food production” (United Nations Framework … 2015). How to reach the corresponding significant reduction of CO2 emission by 2050 is not defined in this document but it implies that mankind must transform its energy technology from a fossil to a renewable basis. Numerous studies and publications have indicated that the sun’s energy and its derivatives (wind water) are by far sufficient to supply world’s energy demand (see e.g. Smalley 2005; Züttel et al. 2010); but the large daily and seasonal power variation of renewable energy is an additional complication for a wide spread replacement of fossil energy by renewable energy.
The Role of Research and Innovation in Europe for the Decarbonisation of Waterborne Transport
Sep 2021
Publication
Waterborne transport contributes to around 14% of the overall greenhouse gas emissions of transport in the European Union and it is among the most efficient modes of transport. Nonetheless considering the aim of making the European Union carbon-neutral by 2050 and the fundamental role of waterborne transport within the European economy effort is needed to reduce its environmental impact. This paper provides an assessment of research and innovation measures aiming at decreasing waterborne transport’s CO2 emissions by assessing European projects based on the European Commission’s Transport Research and Innovation Monitoring and Information System (TRIMIS). Additionally it provides an outlook of the evolution of scientific publications and intellectual property activity in the area. The review of project findings suggests that there is no single measure which can be considered as a problem solver in the area of the reduction of waterborne CO2 emissions and only the combination of different innovations should enable reaching this goal. The highlighted potential innovations include further development of lightweight composite materials innovative hull repair methods wind assisted propulsion engine efficiency waste heat electrification hydrogen and alternative fuels. The assessment shows prevalence of funding allocated to technological measures; however non-technological ones like improved vessel navigation and allocation systems also show a great potential for the reduction of CO2 emissions and reduction of negative environmental impacts of waterborne transport.
UK Low Carbon Hydrogen Standard: Guidance on the Greenhouse Gas Emissions and Sustainability Criteria
Apr 2022
Publication
The Low Carbon Hydrogen Standard sets a maximum threshold for the amount of greenhouse gas emissions allowed in the production process for hydrogen to be considered ‘low carbon hydrogen’. Compliance with the standard will help ensure new low carbon hydrogen production makes a direct contribution to our carbon reduction targets.
This guidance sets out the methodology for calculating the emissions associated with hydrogen production and the steps producers should take to prove that the hydrogen they produce is compliant with the standard.
It is for use by hydrogen producers seeking support from government schemes and policies that have adopted the standard.
The standard requires hydrogen producers to:
This guidance sets out the methodology for calculating the emissions associated with hydrogen production and the steps producers should take to prove that the hydrogen they produce is compliant with the standard.
It is for use by hydrogen producers seeking support from government schemes and policies that have adopted the standard.
The standard requires hydrogen producers to:
- meet a GHG emissions intensity of 20g CO2e/MJLHV of produced hydrogen or less for the hydrogen to be considered low carbon
- calculate their greenhouse gas (GHG) emissions up to the ‘point of production’
- set out a risk mitigation plan for fugitive hydrogen emissions
- meet additional requirements for the use of biogenic inputs where relevant and as appropriate for the feedstock source and classification
Russia’s Policy Transition to a Hydrogen Economy and the Implications of South Korea–Russia Cooperation
Dec 2021
Publication
Leading countries are developing clean energy to replace fossil fuels. In this context Russia is changing its energy policy towards fostering new energy resources such as hydrogen and helium. Hydrogen will not only contribute to Russia’s financial revenue by replacing natural gas but will also provide a basis for it to maintain its dominance over the international energy market by pioneering new energy markets. Russia is aiming to produce more than two million tons of hydrogen fuel for export to Europe and Asia by 2035. However it is facing many challenges including developing hydrogen fuel storage systems acquiring the technology required for exporting hydrogen and building trust in the fuel market. Meanwhile South Korea has a foundation for developing a hydrogen industry as it has the highest capacity in the world to produce fuel cells and the ability to manufacture LNG: (liquefied natural gas) carriers. Therefore South Korea and Russia have sufficient potential to create a new complementary and reciprocal cooperation model in the hydrogen fuel field. This study examines the present and future of Russia’s energy policy in this area as well as discusses South Korea and Russia’s cooperation plans in the hydrogen fuel sector and the related implications.
Storage System of Renewable Energy Generated Hydrogen for Chemical Industry
Nov 2012
Publication
Chemical industry is the base of the value chains and has strong influence on the competitiveness of almost all branches in economics. To develop the technologies for sustainability and climate protection and at the same time to guarantee the supply of raw material is a big challenge for chemical industry. In the project CO2RRECT (CO2 - Reaction using Regenerative Energies and Catalytic Technologies) funded by the German federal ministry of Education and Research carbon dioxide is used as the source of carbon for chemical products with certain chemical processes. Hydrogen that is needed in these processes is produced by electrolyzing water with renewable energy. To store a large amount of hydrogen different storage systems are studied in this project including liquid hydrogen tanks/cryo tanks high pressure tanks pipelines and salt cavities. These systems are analyzed and compared considering their storage capacity system costs advantages and disadvantages. To analyze capital and operational expenditure of the hydrogen storage systems a calculation methodology is also developed in this work.
Global Trade of Hydrogen: What is the Best Way to Transfer Hydrogen Over Long Distances?
Aug 2022
Publication
As a manufactured fuel hydrogen can be produced in a decentralized way in most countries around the world. This means even in a net zero economy the global trade of hydrogen could look quite different to the current international trade in fossil fuels including natural gas. With further declines in the costs of renewable electricity and electrolyzers regions which have lower cost renewable electricity may develop an economic advantage in the production of low-cost hydrogen but for hydrogen to become a globally traded commodity the cost of imports needs to be lower than the cost of domestic production. Unlike oil or natural gas transporting hydrogen over long distances is not an easy task. Hydrogen liquefaction is an extremely energy-intensive process while maintaining the low temperature required for long-distance transportation and storage purposes results in additional energy losses and accompanying costs. The upside is that hydrogen can be converted into multiple carriers that have a higher energy density and higher transport capacity and can potentially be cheaper to transport over long distances. Among the substances currently identified as potential hydrogen carriers suitable for marine shipping liquid ammonia the so-called ‘liquid organic hydrogen carriers’ in general (toluene-methylcyclohexane (MCH) in particular) and methanol have received the most attention in recent years. This paper compares the key techno-economic characteristics of these potential carriers with that of liquified hydrogen in order to develop a better understanding of the ways in which hydrogen could be transported overseas in an efficient manner. The paper also discusses other factors beyond techno-economic features that may affect the choice of optimum hydrogen carrier for long distance transport as well as the global trade of hydrogen.
Ammonia–methane Combustion in Tangential Swirl Burners for Gas Turbine Power Generation
Feb 2016
Publication
Ammonia has been proposed as a potential energy storage medium in the transition towards a low-carbon economy. This paper details experimental results and numerical calculations obtained to progress towards optimisation of fuel injection and fluidic stabilisation in swirl burners with ammonia as the primary fuel. A generic tangential swirl burner has been employed to determine flame stability and emissions produced at different equivalence ratios using ammonia–methane blends. Experiments were performed under atmospheric and medium pressurised conditions using gas analysis and chemiluminescence to quantify emission concentrations and OH production zones respectively. Numerical calculations using GASEQ and CHEMKIN-PRO were performed to complement compare with and extend experimental findings hence improving understanding concerning the evolution of species when fuelling on ammonia blends. It is concluded that a fully premixed injection strategy is not appropriate for optimised ammonia combustion and that high flame instabilities can be produced at medium swirl numbers hence necessitating lower swirl and a different injection strategy for optimised power generation utilising ammonia fuel blends.
Analysis of Standard and Innovative Methods for Allocating Upstream and Refinery GHG Emissions to Oil Products
Sep 2017
Publication
Alternative fuel policies need accurate and transparent methods to find the embedded carbon intensity of individual refinery products. This study investigates different ways of allocating greenhouse gases emissions deriving from refining and upstream crude oil supply. Allocation methods based on mass energy content economic value and innovatively added-value are compared with the marginal refining emissions calculated by CONCAWE’s linear-programming model to the average EU refinery which has been adopted as reference in EU legislation. Beside the most important transportation fuels (gasoline diesel kerosene/jet fuel and heavy fuel oil) the analysis extends to petroleum coke and refinery hydrogen. Moreover novel criteria based on the implications due to hydrogen usage by each fuel pathway have been introduced to test the consistency of the analyzed approaches. It is found that only two economic-based allocation methods are consistent with the introduced criteria. These two methods also give negative refinery emissions for heavy products which is coherent with the marginal emissions calculated through the CONCAWE refinery model. The recommended allocation methods are transparent and use only publicly available statistical data so they may be useful not only for future EU legislation but also in jurisdictions where a representative refinery model is not available.
Is a 100% Renewable European Power System Feasible by 2050?
Nov 2018
Publication
In this study we model seven scenarios for the European power system in 2050 based on 100% renewable energy sources assuming different levels of future demand and technology availability and compare them with a scenario which includes low-carbon non-renewable technologies. We find that a 100% renewable European power system could operate with the same level of system adequacy as today when relying on European resources alone even in the most challenging weather year observed in the period from 1979 to 2015. However based on our scenario results realising such a system by 2050 would require: (i) a 90% increase in generation capacity to at least 1.9 TW (compared with 1 TW installed today) (ii) reliable cross-border transmission capacity at least 140GW higher than current levels (60 GW) (iii) the well-managed integration of heat pumps and electric vehicles into the power system to reduce demand peaks and biogas requirements (iv) the implementation of energy efficiency measures to avoid even larger increases in required biomass demand generation and transmission capacity (v) wind deployment levels of 7.5GWy−1 (currently 10.6GWy−1) to be maintained while solar photovoltaic deployment to increase to at least 15GWy−1 (currently 10.5GWy−1) (vi) large-scale mobilisation of Europe’s biomass resources with power sector biomass consumption reaching at least 8.5 EJ in the most challenging year (compared with 1.9 EJ today) and (vii) increasing solid biomass and biogas capacity deployment to at least 4GWy−1 and 6 GWy−1 respectively. We find that even when wind and solar photovoltaic capacity is installed in optimum locations the total cost of a 100% renewable power system (∼530 €bn y−1) would be approximately 30% higher than a power system which includes other low-carbon technologies such as nuclear or carbon capture and storage (∼410 €bn y−1). Furthermore a 100% renewable system may not deliver the level of emission reductions necessary to achieve Europe’s climate goals by 2050 as negative emissions from biomass with carbon capture and storage may still be required to offset an increase in indirect emissions or to realise more ambitious decarbonisation pathways.
Application of Hydrogen and Hydrogen-containing Gases in Internal Combustion Engines
Nov 2019
Publication
The results of studies of the influence of hydrogen and hydrogen-containing gas additives on the parameters of various types of internal combustion engines are analyzed and summarized. It made possible to identify the features of the effect on the combustion of fuel during internal combustion engine operation at partial loads. The dependences of reducing the toxicity and fuel consumption of internal combustion engine on the amount of addition of hydrogen and a hydrogen-containing gas to the air-fuel mixture were obtained. It allowed to establish quantitative effects of free hydrogen in particular to quantify the region of small hydrogen additives and the conditions under which hydrogen exhibits the qualities of a chemically active component of the mixture.
Hydrogen Stress Cracking Behaviour in Dissimilar Welded Joints of Duplex Stainless Steel and Carbon Steel
Jun 2021
Publication
As the need for duplex stainless steel (DSS) increases it is necessary to evaluate hydrogen stress cracking (HSC) in dissimilar welded joints (WJs) of DSS and carbon steel. This study aims to investigate the effect of the weld microstructure on the HSC behaviour of dissimilar gas-tungsten arc welds of DSS and carbon steel. In situ slow-strain rate testing (SSRT) with hydrogen charging was conducted for transverse WJs which fractured in the softened heat-affected zone of the carbon steel under hydrogen-free conditions. However HSC occurred at the martensite band and the interface of the austenite and martensite bands in the type-II boundary. The band acted as an HSC initiation site because of the presence of a large amount of trapped hydrogen and a high strain concentration during the SSRT with hydrogen charging. Even though some weld microstructures such as the austenite and martensite bands in type-II boundaries were harmless under normal hydrogen-free conditions they had a negative effect in a hydrogen atmosphere resulting in the premature rupture of the weld. Eventually a premature fracture occurred during the in situ SSRT in the type-II boundary because of the hydrogen-enhanced strain-induced void (HESIV) and hydrogen-enhanced localised plasticity (HELP) mechanisms.
Hydrogen Storage in Geological Formations—The Potential of Salt Caverns
Jul 2022
Publication
Hydrogen-based technologies are among the most promising solutions to fulfill the zero-emission scenario and ensure the energy independence of many countries. Hydrogen is considered a green energy carrier which can be utilized in the energy transport and chemical sectors. However efficient and safe large-scale hydrogen storage is still challenging. The most frequently used hydrogen storage solutions in industry i.e. compression and liquefaction are highly energy-consuming. Underground hydrogen storage is considered the most economical and safe option for large-scale utilization at various time scales. Among underground geological formations salt caverns are the most promising for hydrogen storage due to their suitable physicochemical and mechanical properties that ensure safe and efficient storage even at high pressures. In this paper recent advances in underground storage with a particular emphasis on salt cavern utilization in Europe are presented. The initial experience in hydrogen storage in underground reservoirs was discussed and the potential for worldwide commercialization of this technology was analyzed. In Poland salt deposits from the north-west and central regions (e.g. Rogóźno Damasławek Łeba) are considered possible formations for hydrogen storage. The Gubin area is also promising where 25 salt caverns with a total capacity of 1600 million Nm3 can be constructed.
The Potential of Fuel Cells as a Drive Source of Maritime Transport
Nov 2017
Publication
The state of environmental pollution brought about as a result of the modern civilization has been monitored in the interests of the environment and human health since the seventies of the last century. Ensuring the energy security is one of the most basic existential requirements for a functional civilized society. The growing civilizational needs caused by broadly understood development generate demand for the production of all kinds of goods in all sectors of the economy as well as world-wide information transfer. The current energy demand is mostly covered using fossil fuels such as coal oil and natural gas. Some of the energy demand is covered by the energy generated in nuclear reactions and a small part of it comes from renewable energy sources. Energy derived from fossil fuels is inevitably associated with fuel oxidation processes. These processes in addition to generating heat are responsible for the emission of harmful compounds to the atmosphere: carbon monoxide carbon dioxide nitrogen oxides hydrocarbons and particulate matter. These pollutants pose a serious threat to the people as well as the environment in which they live. Due to the large share of fossil fuel energy generation in the process of combustion it becomes necessary to seek other means of obtaining the so-called "clean energy". Fuel cells may have a very high potential in this respect. Their development has enabled attempts to use them in all modes of transport. An important factor in the development of fuel cells is their relatively high efficiency and the coinciding strictening of the emission norms from internal combustion engines used to power maritime transport. Therefore the aim of this article has been to assess the potential of fuel cells as a main source of propulsion power source. A review of the designs of fuel cell systems and their use was performed. The article summarizes the assessment of the potential role of fuel cells as a power source of maritime transport.
Design and Multi-scenario Optimization of a Hybrid Power System Based on a Working Gas Turbine: Energy, Exergy, Exergoeconomic and Environmental Evaluation
Sep 2022
Publication
The rising demand for electricity along with the need to minimize carbon footprints has motivated academics to investigate the flexible and efficient integration of energy conversion technologies. A novel hybrid power generation system based on environmentally friendly and cost-effective technologies to recover the waste heat of a working gas turbine is designed and assessed in different scenarios of multi-objective optimization from energy exergy exergoeconomic and environmental (4E) perspectives. In the proposed system a steam methane reformer and a water gas shift reactor are utilized for hydrogen production while a polymer electrolyte membrane fuel cell (PEMFC) and steam/organic Rankine cycles are run for generating additional power. Aspen Plus in conjunction with Fortran Microsoft Excel and MATLAB is used to model and simulate the designed plant. The response surface methodology (RSM) is utilized to determine accurate surrogate models to describe the evaluation criteria and the Non-dominated Sorting Genetic Algorithm II technique is employed to seek the optimal conditions. Moreover TOPSIS and LINMAP decision-making approaches are used to find the best final solution among Pareto frontiers. The analysis of variance (ANOVA) and sensitivity analysis are also applied to evaluate the importance of the design variables. In this regard three single-objective optimizations and four multi-objective optimization scenarios based on the maximization of the ecological coefficient of performance (ECOP) and the minimization of CO2 emissions and total system product cost (C˙ p) are carried out. It is demonstrated that the system’s evaluation criteria have the highest and lowest sensitivity to the variation of reformer temperature and ORC pressure respectively. From the triple-objective optimization procedure the decision variables including reformer temperature ORC pressure Rankine cycle I pressure and Rankine cycle II pressure are 544 ◦C 4.35 bar 158.12 bar and 52.82 bar respectively. At these conditions the total hybrid system’s energy efficiency exergy efficiency exergy destruction net generated power and total investment cost rate are 45.96% 46.83% 215.72 MW 203.67 MW and 9791 $/h respectively. The findings of this paper conclude that it is necessary to address all objective functions simultaneously in the system’s ultimate optimum design. Furthermore the objective of this paper becomes even more apparent when there is no choice but to cut greenhouse gas emissions while also addressing the rising global energy demand.
Modelling a Highly Decarbonised North Sea Energy System in 2050: a Multinational Approach
Dec 2021
Publication
The North Sea region located in the Northwest of Europe is expected to be a frontrunner in the European energy transition. This paper aims to analyse different optimal system configurations in order to meet net-zero emission targets in 2050. Overall the paper presents two main contributions: first we develop and introduce the IESA-NS model. The IESA-NS model is an optimization integrated energy system model written as a linear problem. The IESA-NS model optimizes the long-term investment planning and short-term operation of seven North Sea region countries (Belgium Denmark Germany the Netherlands Norway Sweden and the United Kingdom). The model can optimize multiple years simultaneously accounts for all the national GHG emissions and includes a thorough representation of all the sectors of the energy system. Second we run several decarbonisation scenarios with net-zero emission targets in 2050. Relevant parameters varied to produce the scenarios include biomass availability VRE potentials low social acceptance of onshore VRE ban of CCUS or mitigation targets in international transport and industry feedstock. Results show a large use of hydrogen when international transport emissions are considered in the targets (5.6 EJ to 7.3 EJ). Electrolysis is the preferred pathway for hydrogen production (up to 6.4 EJ) far ahead of natural gas reforming (up to 2.2 EJ). Allowing offshore interconnectors (e.g. meshed offshore grid between the Netherlands Germany and the United Kingdom) permits to integrate larger amounts of offshore wind (122 GW to 191 GW of additional capacity compared to reference scenarios) while substantially increasing the cross-border interconnection capacities (up to 120 GW). All the biomass available is used in the scenarios across multiple end uses including biofuel production (up to 3.5 EJ) high temperature heat (up to 2.5 EJ) feedstock for industry (up to 2 EJ) residential heat (up to 600 PJ) and power generation (up to 900 PJ). In general most of the results justify the development of multinational energy system models in which the spatial coverage lays between national and continental models.
Effect of Hydrogen Blending on the Energy Capacity of Natural Gas Transmission Networks
Dec 2022
Publication
In this paper the effects of hydrogen on the transport of natural gas-hydrogen mixture in a high-pressure natural gas transmission system are investigated in detail. Our research focuses on the decrease in transferable energy content under identical operating conditions as hydrogen is blended in the gas transmission network. Based on the extensive literature review the outstanding challenges and key questions of using hydrogen in the natural gas system are introduced. In our research the transmissible energy factor - TEF - is defined that quantifies the relative energy capacity of the pipeline caused by hydrogen blending. A new equation is proposed in this paper to find the value of TEF at specific pressure and temperature conditions for different hydrogen concentrations. This practical equation helps the natural gas system operators in the decision-making process when hydrogen emerges in the gas transmission system. In this paper the change of the compression power requirement which increases significantly with hydrogen blending is investigated in detail.
An Effective Optimisation Method for Coupled Wind–Hydrogen Power Generation Systems Considering Scalability
Jan 2023
Publication
A wind–hydrogen coupled power generation system can effectively reduce the power loss caused by wind power curtailment and further improve the ability of the energy system to accommodate renewable energy. However the feasibility and economy of deploying such a power generation system have not been validated through large‐scale practical applications and the economic comparison between regions and recommendations on construction are still lacking. In order to solve the aforementioned problems this paper establishes an economic analysis model for the wind–hydrogen coupled power generation system and proposes a linear optimisation‐based priority analysis method focusing on the major net present value for regional energy system as well as a cost priority analysis method for hydrogen production within sample power plants. The case study proves the effectiveness of the proposed analysis methods and the potential to develop wind–hydrogen coupled power generation systems in various provinces is compared based on the national wind power data in recent years. This provides recommendations for the future pilot construction and promotion of wind–hydrogen coupled power generation systems in China.
Energy and Economic Costs of Chemical Storage
May 2020
Publication
The necessity of neutralizing the increase of the temperature of the atmosphere by the reduction of greenhouse gas emissions in particular carbon dioxide (CO2) as well as replacing fossil fuels leads to a necessary energy transition that is already happening. This energy transition requires the deployment of renewable energies that will replace gradually the fossil fuels. As the renewable energy share increases energy storage will become key to avoid curtailment or polluting back-up systems. This paper considers a chemical storage process based on the use of electricity to produce hydrogen by electrolysis of water. The obtained hydrogen (H2) can then be stored directly or further converted into methane (CH4 from methanation if CO2 is available e.g. from a carbon capture facility) methanol (CH3OH again if CO2 is available) and/or ammonia (NH3 by an electrochemical process). These different fuels can be stored in liquid or gaseous forms and therefore with different energy densities depending on their physical and chemical nature. This work aims at evaluating the energy and the economic costs of the production storage and transport of these different fuels derived from renewable electricity sources. This applied study on chemical storage underlines the advantages and disadvantages of each fuel in the frame of the energy transition.
Effect of Hydrogen-blended Natural Gas on Combustion Stability and Emission of Water Heater Burner
Jun 2022
Publication
To study the effect of hydrogen-blended natural gas on the combustion stability and emission of domestic gas water heater a test system is built in this paper taking a unit of the partial premixed burner commonly used in water heaters as the object. Under the heat load of 0.7~2.3kW the changes of flame shape burner temperature and pollutant emission of natural gas with hydrogen volume ratio of 0~40% are studied with independent control of primary air supply and mixing. The results show that: with the increase of hydrogen blending ratio the inner flame height increases firstly and then reduces while the change of burner temperature is opposite. The maximum inner flame height and the minimum temperature of the burner both appear at the hydrogen blending ratio of 10~20%. It can be seen that the limit of hydrogen blending ratio which can maintain the burner operate safely and stably under rated heat load is 40% through the maximum temperature distribution on the burner surface. The CO emission in the flue gas gradually decreases with the increase of hydrogen blending ratio while the NOx emission fluctuates slightly when the hydrogen blending ratio is less than 20% but then decreases gradually.
Numerical Prediction of Lean Premixed Hydrogen Deflagrations in Vented Vessels
Sep 2021
Publication
In water-cooled nuclear power plants hydrogen gas can be generated by various mechanisms during an accident. In case combustion of the resulting hydrogen-air mixture within the facility occurs existing containment structures may be compromised and excessive radio-active material can be released to the environment. Thus an improved understanding of the propagation of lean hydrogen deflagrations within buildings and structures is essential for the development of appropriate accident management strategies associated with these scenarios. Following the accident in Fukushima Japan the application of three-dimensional computational fluid dynamics methods to high-fidelity detailed analysis of hydrogen combustion processes in both closed and vented vessels has become more widespread. In this study a recently developed large-eddy-simulation (LES) capability is applied to the prediction of lean premixed hydrogen deflagrations in vented vessels. The LES methodology makes use of a flamelet- or progress-variable-based combustion model coupled with an empirical burning velocity model (BVM) an anisotropic block-based adaptive mesh refinement (AMR) strategy an accurate finite-volume numerical scheme and a mesh independent subfilter-scale (SFS) model. Several different vessel and vent sizes and configurations are considered herein. The LES predictions are compared to experimental data obtained from the Large-Scale Vented Combustion Test Facility (LSVCTF) of the Canadian Nuclear Laboratories (CNL) with both quiescent and turbulent initial conditions. Following descriptions of the LES models LES results for both variable chamber sizes and single- and double-vent cases are presented to illustrate the capabilities of the proposed computational approach. In particular the predicted time histories of pressure as well as the maximum overpressure achieved within the vessels and combustion compartments are compared to those from the LSVCTF experiments. The influences of the modelled ignition process initial turbulence and mesh resolution on the LES results are also discussed. The findings highlight the potential and limitations of the proposed LES approach for accurately describing lean premixed hydrogen deflagrations within vented vessels.
Recent Progress in Catalysts for Hydrogen-Chlorine Regenerative Fuel Cells
Oct 2020
Publication
The increasing energy demand and the subsequent climate change consequences are supporting the search for sustainable alternatives to fossil fuels. In this scenario the link between hydrogen and renewable energy is playing a key role and unitized hydrogen-chlorine (H2-Cl2) regenerative cells (RFCs) have become promising candidates for renewable energy storage. Described herein are the recent advances in cell configurations and catalysts for the different reactions that may take place in these systems that work in both modes: electrolysis and fuel cell. It has been found that platinum (Pt)-based catalysts are the best choice for the electrode where hydrogen is involved whereas for the case of chlorine ruthenium (Ru)-based catalysts are the best candidates. Only a few studies were found where the catalysts had been tested in both modes and recent advances are focused on decreasing the amount of precious metals contained in the catalysts. Moreover the durability of the catalysts tested under realistic conditions has not been thoroughly assessed becoming a key and mandatory step to evaluate the commercial viability of the H2-Cl2 RFC technology.
Hydrogen Fuel Cells for Sustainable Energy: Development and Progress in Selected Developed Countries
Jan 2021
Publication
The sustainable development goals concept towards zero carbon emission set forth by the Paris Agreement is the foundation of decarbonisation implemented in most developed countries worldwide. One of the efforts in the decarbonisation of the environment is through hydrogen fuel cell technology. A fuel cell is an energy converter device that produces electricity via the electrochemical reaction with water as the by-product. The application of fuel cells is strongly related to the economic aspect including local and infrastructure costs making it more relevant to be implemented in a developed country. This work presents a short review of the development and progress of hydrogen fuel cells in a developed country such as Japan Germany USA Denmark and China (in transition between developing to developed status); which championed hydrogen fuel cell technology in their region.
System Analysis and Requirements Derivation of a Hydrogen-electric Aircraft Powertrain
Sep 2022
Publication
In contrast to sustainable aviation fuels for use in conventional combustion engines hydrogen-electric powertrains constitute a fundamentally novel approach that requires extensive effort from various engineering disciplines. A transient system analysis has been applied to a 500 kW shaft-power-class powertrain. The model was fed with high-level system requirements to gain a fundamental understanding of the interaction between sub-systems and components. Transient effects such as delays in pressure build up heat transfer and valve operation substantially impact the safe and continuous operation of the propulsion system throughout a typical mission profile which is based on the Daher TBM850. The lumped-parameters network solver provides results quickly which are used to derive requirements for subsystems and components which support their in-depth future development. E.g. heat exchanger transfer rates and pressure drop of the motor's novel hydrogen cooling system are established. Furthermore improvements to the system architecture such as a compartmentalization of the tank are identified.
Hydrogen Bubble Growth in Alkaline Water Electrolysis: An Immersed Boundary Simulation Study
Nov 2022
Publication
Enhancing the efficiency of industrial water electrolysis for hydrogen production is important for the energy transition. In electrolysis hydrogen is produced at the cathode which forms bubbles due to the diffusion of dissolved hydrogen in the surrounding supersaturated electrolyte. Hydrogen (and oxygen) bubbles play an important role in the achievable electrolysis efficiency. The growth of the bubbles is determined by diffusive and convective mass transfer. In turn the presence and the growth of the hydrogen bubbles affect the electrolysis process at the cathode.<br/>In the present study we simulate the growth of a single hydrogen bubble attached to a vertical cathode in a 30 wt KOH solution in a cathodic compartment represented by a narrow channel. We solve the Navier-Stokes equations mass transport equations and potential equation for a tertiary current distribution. A sharp interface immersed boundary method with an artificial compressibility method for the pressure is employed. To verify the numerical accuracy of the method we performed a grid refinement study and checked the global momentum and hydrogen mass balances. We investigate the effects of flow rate and operation pressure upon bubble growth behaviour species concentrations potential and current density. We compare different cases in two ways: for the same time and for the same bubble radius. We observe that increasing the flow velocity leads to a small increase in efficiency. Increasing the operation pressure causes higher hydrogen density which slows down the bubble growth. It is remarkable that for a given bubble radius increasing the pressure leads to a small decrease in efficiency.
The Role of Hydrogen in the Visegrad Group Approach to Energy Transition
Oct 2022
Publication
Hydrogen is an energy carrier in which hopes are placed for an easier achievement of climate neutrality. Together with electrification energy efficiency development and RES hydrogen is expected to enable the ambitious energy goals of the European Green Deal. Hence the aim of the article is to query the development of the hydrogen economy in the Visegrad Group countries (V4). The study considers six diagnostic features: sources of hydrogen production hydrogen legislation financial mechanisms objectives included in the hydrogen strategy environmental impact of H2 and costs of green hydrogen investments. The analysis also allowed to indicate the role that hydrogen will play in the energy transition process of the V4 countries. The analysis shows that the V4 countries have similar approaches to the development of the hydrogen market but the hydrogen strategies published by each of the Visegrad countries are not the same. Each document sets goals based on the hydrogen production to date and the specifics of the domestic energy and transport sectors as there are no solutions that are equally effective for all. Poland’s hydrogen strategy definitely stands out the strongest.
Ammonia Production from Clean Hydrogen and the Implications for Global Natural Gas Demand
Jan 2023
Publication
Non-energy use of natural gas is gaining importance. Gas used for 183 million tons annual ammonia production represents 4% of total global gas supply. 1.5-degree pathways estimate an ammonia demand growth of 3–4-fold until 2050 as new markets in hydrogen transport shipping and power generation emerge. Ammonia production from hydrogen produced via water electrolysis with renewable power (green ammonia) and from natural gas with CO2 storage (blue ammonia) is gaining attention due to the potential role of ammonia in decarbonizing energy value chains and aiding nations in achieving their net-zero targets. This study assesses the technical and economic viability of different routes of ammonia production with an emphasis on a systems level perspective and related process integration. Additional cost reductions may be driven by optimum sizing of renewable power capacity reducing losses in the value chain technology learning and scale-up reducing risk and a lower cost of capital. Developing certification and standards will be necessary to ascertain the extent of greenhouse gas emissions throughout the supply chain as well as improving the enabling conditions including innovative finance and de-risking for facilitating international trade market creation and large-scale project development.
A Review on Recent Progress in the Integrated Green Hydrogen Production Processes
Feb 2022
Publication
The thermochemical water‐splitting method is a promising technology for efficiently con verting renewable thermal energy sources into green hydrogen. This technique is primarily based on recirculating an active material capable of experiencing multiple reduction‐oxidation (redox) steps through an integrated cycle to convert water into separate streams of hydrogen and oxygen. The thermochemical cycles are divided into two main categories according to their operating temperatures namely low‐temperature cycles (<1100 °C) and high‐temperature cycles (<1100 °C). The copper chlorine cycle offers relatively higher efficiency and lower costs for hydrogen production among the low‐temperature processes. In contrast the zinc oxide and ferrite cycles show great potential for developing large‐scale high‐temperature cycles. Although several challenges such as energy storage capacity durability cost‐effectiveness etc. should be addressed before scaling up these technologies into commercial plants for hydrogen production. This review critically examines various aspects of the most promising thermochemical water‐splitting cycles with a particular focus on their capabilities to produce green hydrogen with high performance redox pairs stability and the technology maturity and readiness for commercial use.
Numerical Modelling of H2 Storage with Cushion Gas of CO2 in Subsurface Porous Media: Filter Effects of CO2 Solubility
Jun 2022
Publication
The central objective of this study is to improve the understanding of flow behaviour during hydrogen (H2) storage in subsurface porous media with a cushion gas of carbon dioxide (CO2). In this study we investigate the interactions between various factors driving the flow behaviour including the underlying permeability heterogeneity viscous instability and the balance between the viscous and gravity forces. In particular we study the impact of CO2 solubility in water on the level of H2 purity. This effect is demonstrated for the first time in the context of H2 storage. We have performed a range of 2D vertical cross-sectional simulations at the decametre scale with a very fine cell size (0.1 m) to capture the flow behaviour in detail. This is done since it is at this scale that much of the mixing between injected and native fluids occurs in physical porous media. It is found that CO2 solubility may have different (positive and negative) impacts on the H2 recovery performance (i.e. on the purity of the produced H2) depending on the flow regimes in the system. In the viscous dominated regime the less viscous H2 may infiltrate and bypass the cushion gas of CO2 during the period of H2 injection. This leads to a quick and dramatic reduction in the H2 purity when back producing H2 due to the co-production of the previously bypassed CO2. Interestingly the impurity levels in the H2 are much less severe in the case when CO2 solubility in water is considered. This is because the bypassed CO2 will redissolve into the water surrounding the bypassed zones which greatly retards the movement of CO2 towards the producer. In the gravity dominated scenario H2 accumulates at the top of the model and displaces the underlying cushion gas in an almost piston-like fashion. Approximately 58% of H2 can be recovered at a purity level above 98% (combustion requirements by ISO) in this gravity-dominated case. However when CO2 solubility is considered the H2 recovery performance is slightly degraded. This is because the dissolved CO2 is also gradually vaporised during H2 injection which leads to an expansion of mixing zone of CO2 and H2. This in turn reduces the period of high H2 purity level (>98%) during back-production.
A Review on Numerical Simulation of Hydrogen Production from Ammonia Decomposition
Jan 2023
Publication
Ammonia (NH3 ) is regarded as a promising medium of hydrogen storage due to its large hydrogen storage density decent performance on safety and moderate storage conditions. On the user side NH3 is generally required to decompose into hydrogen for utilization in fuel cells and therefore it is vital for the NH3 -based hydrogen storage technology development to study NH3 decomposition processes and improve the decomposition efficiency. Numerical simulation has become a powerful tool for analyzing the NH3 decomposition processes since it can provide a revealing insight into the heat and mass transfer phenomena and substantial guidance on further improving the decomposition efficiency. This paper reviews the numerical simulations of NH3 decomposition in various application scenarios including NH3 decomposition in microreactors coupled combustion chemical reactors solid oxide fuel cells and membrane reactors. The models of NH3 decomposition reactions in various scenarios and the heat and mass transport in the reactor are elaborated. The effects of reactor structure and operating conditions on the performance of NH3 decomposition reactor are analyzed. It can be found that NH3 decomposition in microchannel reactors is not limited by heat and mass transfer and NH3 conversion can be improved by using membrane reactors under the same conditions. Finally research prospects and opportunities are proposed in terms of model development and reactor performance improvement for NH3 decomposition.
No more items...